abrasion resistant cargo hold coating...all our cargo hold coatings have an approval for...

Abrasion Resistant Cargo Hold Coating


Result in a year (Coal)

Tokyo Club Building, 2-6, Kasumigaseki 3-chome, Chiyoda-ku, Tokyo, 100-0013, Japan TEL : 81-(3)3506-3971 FAX : 81-(3)5511-8542

The information given in this sheet is effective at the date shown below and subject to revision from time to time without notice.All information contained herein concerning our products or services is protected by copyright law and other applicable laws. Any unauthorized use, including copying, replication or reprocessing of the contents, text and/or images contained in this brochure, or distribution of the same, is strictly prohibited.

CHUGOKU MARINE PAINTS, LTD. Tokyo head office

www.cmp-chugoku.com

Issue date December, 2018

Minimize total maintenance costFeaturesUMEGUARD SUPER-H, with excellent abrasion resistant and anti-corrosive property, reduces daily damages caused by loading and discharging of various types of cargoes. As a result, it enables vessels’ owners to reduce the amount of repair works and frequency of cargo holds’ major refurbishment that in turn will provide them with longer systems’ lifetime and savings in both maintenance costs and man-hours.

A number of refurbishments can be reduced by UMEGUARD SUPER-H.

特長Abrasion Resistant Cargo Hold Coating

‘‘UMEGUARD®’’ series, high performance epoxy coating, is widely accepted in the marine industry since 1990’ s. Meanwhile, UMEGUARD SUPER-H was developed to be dedicated for cargo hold enhancing its film hardness and anti-corrosive property. Since its debut in 1990’ s, it has been applied to more than 100 vessels gaining a high reputation from the market, extending the life cycle of the coating and enabling users to minimize the total maintenance cost of cargo hold.

UMEGUARD SUPER-H will protect your cargo holds with its high level of hardness.

Refurbishmentrequired

Age

Age

FDA approval*

In-Service Performance

After application(Y2011) After application(Y2009) After application (Y2007) After application (Y2007)

3 years later 5 years later 7 years later 7 years laterExcellent condition

(without heavy rusts)Good condition

(healthy film remains)Good condition

(applied hopper only)Good condition

(no application on Tanktop )

Pencil Hardness Test

6H4H2HHB2B4B6B

Days

3

2

Extend the lifetime

75% Up to 4H Dedicated for cargo holds

Applied on all areas for newbuilding and M&R*

Applied on hull and cargo holds for M&R*

Applied on general areas and cargo holds for M&R*

(BANNOH 1500)

UMEGUARD SX HS

UMEGUARD SX

73%

77%

57%

2H

H

HB

Cape size 1 Cape size 2 Cape size 3 Cape size 4

All our cargo hold coatings have an approval for foodstuffs.The product also meets the requirements outlined in the Code of Federal Regulation (CFR) of the FDA

*FDA (Food and Drug Administration, Department of U.S. Health and Human Services)

Soft

Hard

Pen

cil h

ardn

ess

Dam

age

D

amag

e Refurbishment

required

(ISO 15184)

VS PencilHardness RemarksUMEGUARD® Series

Outstanding impact & abrasion resistance

Excellent anti-corrosive performance against sea/fresh water, chemicals, heatand high humidity

Hard coating with robustness and crack resistance

Quick dry curing and low VOC

*M&R: maintenance and repair







www.cmp-chugoku.com


Minimize total maintenance costFeaturesUMEGUARD SUPER-H, with excellent abrasion resistant and anti-corrosive property, reduces daily damages caused by loading and discharging of various types of cargoes. As a result, it enables vessels’ owners to reduce the amount of repair works and frequency of cargo holds’ major refurbishment that in turn will provide them with longer systems’ lifetime and savings in both maintenance costs and man-hours.

A number of refurbishments can be reduced by UMEGUARD SUPER-H.

特長Abrasion Resistant Cargo Hold Coating

‘‘UMEGUARD®’’ series, high performance epoxy coating, is widely accepted in the marine industry since 1990’ s. Meanwhile, UMEGUARD SUPER-H was developed to be dedicated for cargo hold enhancing its film hardness and anti-corrosive property. Since its debut in 1990’ s, it has been applied to more than 100 vessels gaining a high reputation from the market, extending the life cycle of the coating and enabling users to minimize the total maintenance cost of cargo hold.

UMEGUARD SUPER-H will protect your cargo holds with its high level of hardness.

Refurbishmentrequired

Age

Age

FDA approval*

In-Service Performance

After application(Y2011) After application(Y2009) After application (Y2007) After application (Y2007)

3 years later 5 years later 7 years later 7 years laterExcellent condition

(without heavy rusts)Good condition

(healthy film remains)Good condition

(applied hopper only)Good condition

(no application on Tanktop )

Pencil Hardness Test

6H4H2HHB2B4B6B

Days

3

2

Extend the lifetime

75% Up to 4H Dedicated for cargo holds

Applied on all areas for newbuilding and M&R*

Applied on hull and cargo holds for M&R*

Applied on general areas and cargo holds for M&R*

(BANNOH 1500)

UMEGUARD SX HS

UMEGUARD SX

73%

77%

57%

2H

H

HB

Cape size 1 Cape size 2 Cape size 3 Cape size 4

All our cargo hold coatings have an approval for foodstuffs.The product also meets the requirements outlined in the Code of Federal Regulation (CFR) of the FDA

*FDA (Food and Drug Administration, Department of U.S. Health and Human Services)

Soft

Hard

Pen

cil h

ardn

ess

Dam

age

D

amag

e Refurbishment

required

(ISO 15184)

VS PencilHardness RemarksUMEGUARD® Series

Outstanding impact & abrasion resistance

Excellent anti-corrosive performance against sea/fresh water, chemicals, heatand high humidity

Hard coating with robustness and crack resistance

Quick dry curing and low VOC

*M&R: maintenance and repair







www.cmp-chugoku.com


abrasion resistant cargo hold coating...all our cargo hold coatings have an approval for...

Documents