about varanasi additive manufacturing: theory & practice · importance. this religious...

2
on Addive Manufacturing: Theory & PracceName (block leer): …………………………………......................................... Designaon & pay scale: ………………………………..................................... Organizaon: .………………………………………............................................. Address for communicaon: ……………………………................................. ………….…………………………………………….........……................................... Pin code: .................…………… Ph. No.: …………………………...................... E-mail: ……………………………………………….........………………...................... Highest Academic Qualificaon: ………………………..………...................... Specializaon: …………………………………………….……..………..................... Experience (in years) : (a) Teaching ……………………………… (b) Industrial ……………………………... Accommodaon required (Yes/ No): Amount of TA required as per entlement menoned in the bro- chure (only for AICTE approved college teachers): ………….…………………………………………................................................Please register me for the QIP short term course on Addive Man- ufacturing: Theory & Pracceheld at IIT(BHU) Varanasi. Place : Date : Signature of the applicant SPONSORSHIP Prof./Dr./Mr./Ms./Mrs./ is an employee of our instute and his/ her applicaon is hereby sponsored. The applicant will be per- mied to aend the QIP short term course on Addive Manu- facturing: Theory & Pracceat IIT(BHU) Varanasi, during 16-22 March, 2017, if selected. Date : Signature of Sponsoring Authority Designaon : Official Seal : For applicants from the Industries, R&D laboratories and other or- ganizaon: DD No. Date: Bank : Amount : Signature of the Applicant About Varanasi The holy city of Varanasi is the oldest living city in the world which is also known as the Capital of the Spiritual- isc world. The city has a great historical and cultural importance. This religious and cultural capital of India is situated at the bank of the holy river Ganges and is famous for temples of Lord Shiva, Buddha (Sarnath) and Sankat Mochan etc. Varanasi is the premiere & mostly place of oriental learning and simultaneously keeping pace with modern advanced knowledge. The vibrant city with its mulple dimensions of knowledge and liberaon has a magnec aracon for people all over the world. How to Reach The city of Varanasi is well connected by road, rail and air with all the important cies of India. Regular flights are there from Varanasi to Delhi, Mumbai, Chennai, Hy- derabad, Bangalore, Kolkata, Khajuraho and Lucknow. The IIT (BHU) campus is about 12Km from Varanasi Can and 20Km from Mughalsarai railway staon and 38Km from the Babatpur (Varanasi) airport. IMPORTANT Last date of registraon (if seats available) March 13, Enquires should be addressed to Dr. Santosh Kumar, Dept. of Mech. Eng., IIT Varanasi–221 E-mail: [email protected] Organized by : Department of Mechanical Engineering Indian Instute of Technology (BHU) Varanasi - 221005, Uar Pradesh Coordinators Prof. Santosh Kumar & Dr. V. S. Rao Department of Mechanical Engineering Indian Instute of Technology (BHU), Varanasi-221005 (UP) Mobile: +917080794851; +918765449290 E-mail: [email protected]

Upload: others

Post on 04-Jul-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: About Varanasi Additive Manufacturing: Theory & Practice · importance. This religious andcultural capital of India is situated at the bank of the holy river Ganges and is fortemplesofLordShiva,

on

“Additive Manufacturing: Theory & Practice”

Name (block letter): ………………………………….........................................

Designation & pay scale: ……………………………….....................................

Organization: .……………………………………….............................................

Address for communication: …………………………….................................

………….…………………………………………….........……...................................

Pin code: .................…………… Ph. No.: …………………………......................

E-mail: ……………………………………………….........………………......................

Highest Academic Qualification: ………………………..………......................

Specialization: …………………………………………….……..……….....................

Experience (in years) :

(a) Teaching ……………………………… (b) Industrial ……………………………...

Accommodation required (Yes/ No):

Amount of TA required as per entitlement mentioned in the bro-chure (only for AICTE approved college teachers):

………….…………………………………………................................................…

Please register me for the “QIP short term course on “Additive Man-ufacturing: Theory & Practice” held at IIT(BHU) Varanasi.

Place :

Date : Signature of the applicant

SPONSORSHIP

Prof./Dr./Mr./Ms./Mrs./ is an employee of our institute and his/her application is hereby sponsored. The applicant will be per-mitted to attend the “QIP short term course on “Additive Manu-facturing: Theory & Practice” at IIT(BHU) Varanasi, during 16-22 March, 2017, if selected.

Date : Signature of Sponsoring Authority

Designation :

Official Seal :

For applicants from the Industries, R&D laboratories and other or-ganization:

DD No. Date:

Bank :

Amount : Signature of the Applicant

About Varanasi

The holy city of Varanasi is the oldest living city in the

world which is also known as the Capital of the Spiritual-

istic world. The city has a great historical and cultural

importance. This religious and cultural capital of India is

situated at the bank of the holy river Ganges and is

famous for temples of Lord Shiva, Buddha (Sarnath)

and Sankat Mochan etc. Varanasi is the premiere &

mostly place of oriental learning and simultaneously

keeping pace with modern advanced knowledge. The

vibrant city with its multiple dimensions of knowledge

and liberation has a magnetic attraction for people all

over the world.

How to Reach

The city of Varanasi is well connected by road, rail and

air with all the important cities of India. Regular flights

are there from Varanasi to Delhi, Mumbai, Chennai, Hy-

derabad, Bangalore, Kolkata, Khajuraho and Lucknow.

The IIT (BHU) campus is about 12Km from Varanasi

Cantt and 20Km from Mughalsarai railway station and

38Km from the Babatpur (Varanasi) airport.

IMPORTANT

Last date of registration (if seats available)

March 13,

Enquires should be addressed to

Dr. Santosh Kumar,

Dept. of Mech. Eng.,

IIT Varanasi–221

E-mail: [email protected]

Organized by :

Department of Mechanical Engineering Indian Institute of Technology (BHU) Varanasi - 221005, Uttar Pradesh

Coordinators

Prof. Santosh Kumar & Dr. V. S. Rao Department of Mechanical Engineering Indian Institute of Technology (BHU), Varanasi-221005 (UP) Mobile: +917080794851; +918765449290 E-mail: [email protected]

Page 2: About Varanasi Additive Manufacturing: Theory & Practice · importance. This religious andcultural capital of India is situated at the bank of the holy river Ganges and is fortemplesofLordShiva,

Course objectives/Scope The participants (academicians/students/industry) of this course (07 days) will learn the importance of Additive Manufacturing (3D Printing/ Rapid Prototyping/ Green Manufacturing) and its huge role in Global Product Development and Innovation. The participants (50 nos) will learn theory of AM to Compare the traditional versus next generation manufacturing & will learn to have a rich knowledge of 3D printing technologies, devices, capabilities, materials and applications along with various software tools, processes and techniques enabling person-al fabrication, on 3D printing & Scanning. The course will help to ex-plore the broad range of 3D printing theory & practice along with appli-cations including Biomedical & Bio-manufacturing, Aerospace, Consum-er Products, and Creative Artistry to mention a few. Finally, participants will learn the latest trends and opportunities in Additive Manufacturing, including “personal” 3D printing, localized services, production of parts, mass customization, and how to commercialize new ideas.

Course Content Introduction to the Basic Principles of Additive Manufacturing/ digital Manufacturing: advantages and limitations of AM technologies AS developing new engineering systems, identifying emerging opportuni-ties in developing products for mass customization.

Additive Manufacturing Processes: Extrusion, Beam Deposition, Jetting, Sheet Lamination, Direct-Write, Photo polymerization, Metal Technology & Processes, Sintering, Powder Bed Fusion.

Design/Fabrication Processes: Data Sources, Software Tools, File Formats, Model Repair and Validation, Pre- & Post-processing, design practices for additive manufacturing.

Designing for Additive Manufacturing: Scaffolds, bio-printing, tissue and organ engineering.

Multiple Materials, Metals, polymers, ceramics, Hybrids, Composite Materials, current and material selection &future directions, Process & Material Selection.

Direct Digital Manufacturing and Distributed Manufacturing

Related Technologies: 3D scanning, sintering, Mold-making, Casting, Scanning, rapid tooling (RT) rapid manufacturing (RM).

Applications of AM: Aerospace, Automotive, Manufacturing, Archi-tectural Engineering, Art, Jewelry, Toys, Packaging, Architecture, De-sign and Entertainment and many more.

Biomedical Applications of AM: Medical, Biomedical, Dental, Bio-printing, Tissue & Organ Engineering and many others.

Intellectual Property, Product Development, Commercialization.

Future Trends and Directions in Additive Manufacturing, Busi-ness Opportunities. Standards and standardization in 3D Printing and the Future of Manufacturing.

This course is taught in such a way that 90% the C A D -C A M & M a n u f a c t u r i n g techniques are same of branch. Hence, students/faculty/engineers from Civil, Mechani-cal, Structural, Automotive, Electrical, Construction, Aerospace, Biomedical etc. can attend.

This course is not just a course; it is a skill building program in new technology area. Anyone interested to enhance their skill in the Additive Manufacturing domain, are welcome to participate.

Course Speakers Subject experts will be drawn from premier institution like IITs, NITs, IISc and other reputed research institutes /CSIR Laboratory etc.

Accommodation

Efforts are being made to accommodate in the IIT(BHU) guest house on twin sharing basis on receipt of request from the par-ticipants. Please note that no family accommodation is available.

Department of Mechanical Engineering IIT (BHU)

The department is equipped with state of the art infrastructure to carry out research in the area of Metal forming, CAD-CAM, Rapid Prototyping, composites, Friction, Wear & Lubricants testing. The department has executed several research projects related to the above domain areas from funding agencies such as BRNS, DST, AICTE, DRDO etc. Faculty members have collaborations with some leading Universities/Laboratories/Institutes around the globe.

Venue: New Seminar Hall, Department of Mechanical Engineering

IIT (BHU), Varanasi

Registration Fee

Indian • Industry Professional: Rs. 18,000/- •

• •

International • Industry Professionals: USD 50 • Faculty Member: USD 450 • Student: USD 200

Registration Process • Send an email to: [email protected] With the list of participants interested to attend

• Depending upon the seat availability, provisional confir-

mation though email will sent within 2 • After receiving email confirmation, kindly Post

the registration fee (Cheque/DD in favor 'Registrar, IIT(BHU), Varanasi' payable at Varanasi, (SBI Branch Code: 11445) to the address below.

• Use the registration Also, send a scanned copy of the application form and draft through email : [email protected]

- Prof. Rajeev Sangal, Director,