about us your stop leak solution - lindemann...
TRANSCRIPT
BEST CHOICE REGARDING ECONOMY AND FUTURE ENVIRONMENT
Get in touchLindemann Marine Products
+45 48 14 11 11
www.Lindemann-Marine.com
Shipserv Tradenet #70342
about usLINDEMANN MARINE PRODUCTS
We are a 100% Danish owned company with more than 30 years of experience in solving lubrication related problems in areas such as automotive, wind turbine and marine industry.
Our vision is to grow and sustain a good reputation as a preferred developer of high quality specialized products.
Our goal is to become the market leader in the supply of high performance additives and lubricants in the marine sector.
PRODUCTION & STORAGE
In 2014 we have moved to a modern production facility with capacity of up to 7000 kg of stop leak additives daily. Even though we are niche manufacturer of additives, our manufacturing capacity can match high demand.
We can always offer:
� Great flexibility of production and tailor-made solutions � High quality ingredients from well-known European suppliers � Fast delivery and short lead time
YOUR STOP LEAK SOLUTION
Systems equipped with face type seals must use MPS 895.
The product works in two steps. When the product has reached the face rings in the sealing system the first step is to polish the mating surfaces.
When this has been done, the product builds a self-lubricating layer on the mating surfaces of both sealing rings. This secures the best possible contact between the two sealing rings with perfect sealing effect and almost no wear due to the self-lubricating surfaces.
Systems equipped with lip type seals must use MPS 896.
In case of water ingress, MPS 896 (in its concentrated form) should be pumped into the chambers between sealing rings facing the water filling the cavities to the most.
In case of oil loss, MPS 896 should be admixed to stern tube oil at a rate of 5-10%. The product dissolves in the stern tube oil and travels with the oil to the point where the oil leak is occurring and builds a “dynamic” barrier in front of the stressed seals both in motion and at rest.
Benefits
NO DRY DOCK OR OIL CHANGE
NEEDED
DYNAMIC PROTECTION
ADD 5-10% OF TOTAL
OIL VOLUME
COMPATIBLE WITH MOST OIL TYPES
Distribution
24 HOURS DELIVERY TO EVERY MAJOR PORT IN EUROPE
72 HOURS DELIVERY TO EVERY MAJOR PORT IN THE
WORLD
TEchniCAL AssISTANCE
PRODUCT application RANGE
SUB-SEA SYSTEMS
� Stern Tubes
� Rudders
� CPPs
� Stailizers
� Thrusters
MPS LINE (WITH TEFLON)
� MPS 890 - Prevention Paste for all type seals
� MPS 895 - Stop Leak Paste for face type seals
� MPS 896 - Stop Leak Paste for lip type seals
DIESEL ENGINES
� 2 / 4 Stroke Trunk Engines
� For Low & High Speed Engines
DPM LINE (WITH TELFON)
� DPM - Maintenance Additive
� DPM-SL - Stop Leak Additive
HYDRAULIC SYSTEMS
� Hydrauclic Steerings
� Pumps
� Tanks
HYD LINE (WITH TEFLON)
� HYD - Maintenance Additive
� HYD-SL - Stop Leak Additive
ALL-AROUND SYSTEMS
� Cables
� Bearings
� Valves
MULTI-PURPOSE MAINTENANCE GREASES(WITH TEFLON)
� Blue-G - Extreme Pressure Grease
� Red-G - Multi-Purpose Grease
DETAILED APPLICATION GUIDANCE
ON-SITE ASSITANCE BY
LINDEMANN TEAM
MONITORING FUTURE OIL ANALYSES
24/7 TECHNICAL SUPPORT
STABILIZERSCPPS STERN TUBES COOLING SYSTEMS THRUSTERSRUDDERS
HYDRAULICSENGINES
Lindemann Marine Stop Leak and Maintenance additives are specifically developed to reduce or prevent leakages in different types of oil lubricated systems. These additives combine the qualities of various minerals and compounds such as i.e. Bentonite and Teflon, which provide extreme corrosion protection, reduce friction and wear and, most of all, ensure superior sealing properties.
Working PrinciplesThe Lindemann MPS Stop Leak and Maintenance products are specially designed to assist the sealing function of all types of seals in all sub-sea systems such as thrusters, stern tubes, steering machines and rudder stems. MPS products have been applied with success since 2000 and are recommended by Rolls Royce Marine.
100% MPS paste added 5-10% MPS paste added
LIP TYPE SEALS
FACE TYPE SEALS
COOLING SYSTEMS
� Radiators & Blocks
� Heater cores
� Cylinder heads
RADIATOR & BLOCK STOP LEAK
� Radiator & Block Stop Leak
Dupont
Teflon
Dupont
Teflon
Dupont
Teflon
Dupont
Teflon
5-10% MPS paste added