abn 83 064 482 613 mining catalogue acacia ridge … catalogue.pdf · wa1200 volvo l1200 cat d9 d10...
TRANSCRIPT
V2 2013 | Driveline Services Australia
56 Colebard Street East, Acacia Ridge Qld. 4110 Australia
P | (07) 3275 7600F | (07) 3274 1435 E | [email protected] | driveline.com.au
ABN 83 064 482 613
DRIVELINES E R V I C E S A U S T R A L I Athe underbody & power transmission specialists
MINING CATALOGUE
brisbane south brisbane north dubbogold coastmackaymelbournenewcastlenorth melbourneperthtownsville
bran
ches
DRIVE
1300-drivelinedriveline.com.au
version 2 | 2013
V2 2013 | Driveline Services Australia
industrial balancing
underground mining
warranty
light & ancilliary fleet
bearings
heavy duty spline sets
universal joints
open cut mining
power trailer & haul trucks
V2 2013 | Driveline Services Australia
BIGGER
STRONGER
CHEAPER
15C SPLINE SETSSUPERIOR FROM EVERY ANGLE
- Driveshafts - CV Front Wheel Drive - Steering - Suspension - Diff & Gearbox - Performance Products -
Mining Equipment -
Driveline Services Australia - the underbody specialists’ new 15C spline sets for CAT large haul trucks and wheel loaders, including the 773, 777, 785, 789, 793, 992 & 994, feature larger, heavy-duty splines and an enhanced dustcover design to maximise your driveline’s strength and longevity.
38 spline101.6mm
26 spline137.435mm
Superior Splines
Superior dustcovers
OLD STYLE NEW STYLE
OLD STYLE NEW STYLE
Superior Tube19mm larger than old style
184mm
00047D
DRIVELINE SERVICESAUSTRALIA PTY LTD
For prices & delivery call
Driveline Services AustraliaThe Underbody Specialists
56 Colebard Street East, Acacia Ridge Qld 4110P (07) 3275 7600 F (07) 3274 1435
[email protected] | www.driveline.com.au
15C SPLINE SETSSUPERIOR FROM EVERY ANGLE
- Driveshafts - CV Front Wheel Drive - Steering - Suspension - Diff & Gearbox - Performance Products -
Mining Equipment -
Driveline Services Australia - the underbody specialists’ new 15C spline sets for CAT large haul trucks and wheel loaders, including the 773, 777, 785, 789, 793, 992 & 994, feature larger, heavy-duty splines and an enhanced dustcover design to maximise your driveline’s strength and longevity.
38 spline101.6mm
26 spline137.435mm
Superior Splines
Superior dustcovers
OLD STYLE NEW STYLE
OLD STYLE NEW STYLE
Superior Tube19mm larger than old style
184mm
00047D
DRIVELINE SERVICESAUSTRALIA PTY LTD
For prices & delivery call
Driveline Services AustraliaThe Underbody Specialists
56 Colebard Street East, Acacia Ridge Qld 4110P (07) 3275 7600 F (07) 3274 1435
[email protected] | www.driveline.com.au
38 SPLINE101.6mm
26 SPLINE137.435mm
SUPERIOR FROM EVERY ANGLE
| heavy duty spline setsFAST facts
• Increased stub OD• Larger, full-length splines• Glide-coated barrels (subject to part number)• Improved sealing configuration• Enhanced dust covers• 30-40% longer life-hours• Bolts straight in! (No other modifications required)
Driveline Services Australia are proud to offer their feature-packed heavy-duty spline set upgrades on all open cut and underground off-highway vehicle driveshafts.
Delivering 30-40% longer life-hours than standard OE assemblies, Driveline’s heavy duty & extra heavy duty* shafts are the choice of more maintenance departments.
* Model dependent
Example to Suit:785, 789, 793, 992, 994
Make your shaft EHD with Driveline’s 15.5C kits.Ask us how today!
heav
y du
ty s
plin
e se
ts
V2 2013 | Driveline Services Australia univ
ersa
l joi
nts
FAST facts
3 Large range of OE spec & HD universal joints for all makes and models.
3 One part number = one universal joint with all the bolts needed for change-out - If your current supplier doesn’t do this, talk to us!
3 For Komatsu: Genuine Spicer Italcardano universal joints, greasable or lubed-for-life variations in a comprehensive range of sizes, in round bearing or C-type.
3 For Caterpillar: Genuine Rockford universal joints produced in the USA to exacting tolerances and available in round bearing or C-type, greasable or lubed-for-life variations in a complete range of sizes.
| universal joints
V2 2013 | Driveline Services Australia
| power trailer & haul trucksFAST facts
pow
er t
raile
r &
hau
l tru
cks
3 Extended driveline life hours.
3 We’re the manufacturer so all parts on shelf
3 Available in greasable and sealed Lubed for Life units
3 Home of the Mechanics HD Slip & Spline set - extends tailshaft service life by 30-40%
3 Repairs & complete replacement shafts for all makes and models of Kenworth, Mack & other tractors
3 Standardise the PSAs and JSAs (driveshafts & interaxles) across your on & off-highway fleet, reducing your costs, stock holdings & management
3 OE spec & HD universal joints (Spicer, Mechanics)
3 Brakes
3 Braking Components
3 Suspension
3 Wheel Bearings
V2 2013 | Driveline Services Australia
3 Driveshaft design, modification, repair & balancing
3 We’re the manufacturer so all parts on shelf
3 Home of the HD Slip & Spline set - extends tailshaft service life by 30-40%
3 Complete replacement shafts for all makes and models of loaders, dozers, dumpers & drills
3 OE spec & HD universal joints (Spicer, European, Japanese)
3 Diff & gearbox rebuilds, testing & reconditioning
FAST facts
open
cut
min
ing
| open cut mining
3 Driveshafts 3 Axles 3 Universal Joints
3 Differentials 3 Final Drives 3 Drop Boxes
3 Transmissions 3 Torque Converters
V2 2013 | Driveline Services Australia
COMPREHENSIVE
open
cut
min
ing
oe part number cross-referencing for:
GRADERS
ARTICULATED DUMP TRUCKS
CAT 14M
DUMP TRUCKS
SURFACE & PIT HAULERS
CAT D400E 725 735 740HITACHI AHSERIESTORO R50+
CAT 769 773 775 777 784 785 789 793 797KOMATSU 465 785
MACK TitanKENWORTH C500 C500Bigfoot C510 C510Bigfoot &FullPowerTrailerSupport
V2 2013 | Driveline Services Australia
WHEEL LOADERS
DOZERS
CAT 690 844 854 980 988 992 994KOMATSU WA500 WA800 WA900 WA1200VOLVO L1200
CAT D9 D10 D11KOMATSU 475
open
cut
min
ing
COMPREHENSIVEoe part number cross-referencing for:
V2 2013 | Driveline Services Australia unde
rgro
und
min
ing
FAST facts | underground mining
3 New & exchange underground diffs & axles
3 Axle parts & rebuild kits
3 Axle, differential, final drive, drop box, transmission & torque converter rebuilds, testing & reconditioning.
3 OE spec & HD universal joints (Spicer, European, Japanese)
3 Driveshaft design, modification, repair & balancing.
3 We’re the manufacturer so all parts on shelf
3 Home of the HD Slip & Spline set - extends tailshaft service life by 30-40%
3 Complete replacement shafts for all makes and models of loaders, haulers, dumpers, drills & transporters
3 Underground steering & suspension solutions
3 Axles 3 Transmissions 3 Universal Joints
3 Differentials 3 Torque Converters 3 Driveshafts
3 Steering 3 Suspension
V2 2013 | Driveline Services Australia unde
rgro
und
min
ing
3 Fast turnaround3 Genuine Dana & Timken componentry3 Competitive pricing3 Detailed quote complete with photographic evidence3 Expert engineering & assembly3 Over 30 years of underbody & power transmission experience
TRANSMISSIONSTORQUE
CONVERTERSDIFFERENTIALS
genuine DANA axles and service exchange program
FAST facts | axles & transmissions
3 Axera3 SMV3 ZF3 Cat3 Tamrock3 Dana3 Komatsu3 Terex3 Clark
3 Normet3 Toro3 Kessler3 PJB3 VLI3 Volvo3 Sandvik
and more ...
V2 2013 | Driveline Services Australia
COMPREHENSIVErebuild & repair service for:
LOADERS/HAULERS/DRILLS
and many more ...
BUCYRUSCATEIMCOELPHINSTONEHITACHIJUG-A-OTOROWAGNER...ANDMANYMORE
unde
rgro
und
min
ing
TRANSPORTERS
JOYPJBSMV
V2 2013 | Driveline Services Australia
• Up to 3t maximum capacity
• Up to 2100mm of swing diameter
• 3050mm balancing bed
• Powerful 11kw engine
• Balances up to 1250rpm
• Accurate to within 12 r/min
• Up to 700 Nm torque
FAST facts
indu
stri
al b
alan
cing
3 State-of-the-art computer controlled balancing ideal for the refurbishment & balancing of:
3 Fans 3 Wheel hubs
3 Industrial shafts 3 Armatures
3 Propellers 3 Impellers
3 Spindles 3 Centrifuges
3 Gyroscopes 3 Rollers
3 Beaters 3 Turbine shafts
3 Industrial shafts 3 Other large rotating parts & equipment
3 Brake drums
| industrial balancing
V2 2013 | Driveline Services Australia
FAST facts
light
& a
ncill
iary
flee
t
3 Standard, HD & EHD driveshaft design, modification, repair & balancing
3 New & remanufactured steering racks, boxes & pumps for light & auxilliary fleet
3‘ ‘Mine spec’ exchange diffs, gearboxes & transmissions
3 Brake discs, pads & rotors
3 ‘Mine spec’ CV joints & shafts
3 Standard, raised, HD & GVM suspension solutions
3 Universal joints
3 Centre bearings & inter-axle shafts
| light & ancilliary fleet
V2 2013 | Driveline Services Australia
COMPREHENSIVEparts & services for:
TOYOTA
-HiluxKUN-HiluxLN167-HiluxRZN149-HiluxTGN16-LandCruiserHZJ-LandCruiserUZJ-LandCruiserVDJ-LandCruiserPrado150
NISSAN
-PatrolY61
ISUZU
HINO
MACK
KENWORTH
... and many others
light
& a
ncill
iary
flee
t
V2 2013 | Driveline Services Australia
FAST facts
bear
ings
3 Complete range of Dodge Baldor ISN & SN bearings
3 Factory lubed, sealed and adjusted, ready to slip onto the shaft
3 Patented ISN adapter system installation/removal in just 15 minutes.
3 No feeler guages needed
3‘ No clearance settings
3 No shaft damage
3 No problems!
| bearings
ISN and IP Configuration OptionsISN SERIES
Interchangeable with competitive SN products.
Two-Bolt Plummer Blocks30mm to 140mm
ISAF SeriesInterchangeable with DODGE USAF and many competitive SAF productsTwo-Bolt Plummer Blocks1-7/16” up to 3-7/16”Four-Bolt Plummer Blocks2-7/16” up to 7”
IP SERIESInterchangeable with DODGE S-2000 Unitized Housings and many competitive products.Two-Bolt Plummer Blocks1-1/8” to 4”
Four-Bolt Plummer Blocks2-3/8” up to 5”Four-Bolt Flanges1-1/8” up to 4”Flange Bearings Piloted1-1/8” to 5”Wide Slot Take-Up1-1/8” to 4”Inserts1-1/8” to 7”
IP-E SERIESOur IP-E Bearing is now available with Type E Mounting DimensionsTwo-Bolt Plummer BLocks1-1/8” up to 3-1/2”Four-Bolt Plummer BLocks2-1/4” up to 7”Four Bolt Flanges1-3/16” up to 4-1/2”Piloted Flanges1-3/16” up to 5”Wide Slot Take-ups1-1/8” up to 4”
V2 2013 | Driveline Services Australia bear
ings
NOfeeler gauges. clearance settings. shaft damage. problems.
Seal/Land maintains full seal contact when misaligned
Adapter sleeve improvesconcentricity and reduces inherent vibration
Ease in mounting and dismounting achieved through patentedadapter system
Patented triple lip Nitrile Seal resists heat and chemical breakdown
Corrosion resistantflinger blockscontaminants
Steel cage with guiderings offers precision roller guidance
Ready to roll…• Factory lubed, sealed and adjusted, ready to slip onto the shaft• Fully contained TRIDENT face-rubbing seal does not run on shaft and gives 100% contact at
100% constant pressure, 100% of the time• Patented IMPERIAL adapter sleeve concentricity virtually eliminates fretting corrosion• Field convertible from non-expansion to expansion and expansion to non-expansion• Elongated bolt holes for easy mounting• Available in 30-140mm bore pillow block housings (dimensionally interchangeable with SN
500 standard DIN 736/ISO 113)
ON/OFF IN JUST 15 MINUTES
FAST facts | isn bearings
V2 2013 | Driveline Services Australia
FAST facts | warranty
3 All mining products covered by a full & comprehensive warranty
3 Proven in the field
3 All products guaranteed to be free from defects in materials and workmanship
3 $20,000,000 public liability coverage
3 Products proven and backed
war
rant
y
V2 2013 | Driveline Services Australia
war
rant
y
UPDATED: AUGUST 2012
MINING PRODUCTS
DRIVELINE SERVICES AUSTRALIA PTY LTD (“the Company”) warrants to the original purchaser that all products purchased from the Company for use in mining-related activities will be free of defects in materials and workmanship, subject to the following conditions:
1. The period of this warranty, to the original purchaser only, will be for: a. Driveshafts and universal joints: six months or 2,000 hours from the
date of original purchase, whichever occurs first. b. Light vehicle products, including tailshafts, constant velocity, steering,
suspension and brake components: one month or 1,000 km from the date of original purchase, whichever occurs first.
c. Diff and gearbox rebuilds: one month or 1,000 km from the date of original purchase, whichever occurs first.
d. Heavy vehicle axles and transmissions: one month or 500 hours from the date of original purchase, whichever occurs first.
e. Industrial balancing work: six months or 2,000 hours from the date of original purchase, whichever occurs first.
2. This warranty is subject to the following limitations: a. Damage caused by improper installation, misuse, collision, accident or
subject to comprehensive insurance claim. b. The unit must have been installed by a qualified motor repairer/fitter in
accordance with the vehicle manufacturer’s instructions. c. Removing, dismantling, modifying or otherwise tampering with the
product without prior written authorisation from the Company will render the warranty void.
d. This warranty does not cover any vehicle modified in any way from the factory specifications.
e. This warranty does not cover any vehicle subjected to misuse, neglect or contamination.
f. This warranty does not cover any vehicle used in motorsport or speed trials.
g. This warranty is not transferable on the sale of the vehicle.
3. Subject to the above conditions, liability under this warranty is limited to the replacement of an item proven to the company’s reasonable satisfaction to be defective in materials or workmanship. No liability is accepted for any transport, removal, installation, towing or other associated costs. The cost of labour, including wheel alignments, will not be considered.
4. Claims under this warranty policy must be commenced by submitting to the Company a completed copy of the Company’s standard Request for Return Authorisation form (available from the Company on request), including a detailed description of why or how the product failed and proof of the date and mileage of the vehicle at the time of original fitment and time of failure. The Company will then advise if the product is to be returned for inspection, which, if so required, must be arranged by the purchaser within 14 days on a freight pre-paid basis, quoting the Return Authority Number provided by the Company.
5. The terms of this warranty policy, as set out above, take precedence over any other warranty written, spoken or implied by any persons, whether employed by the Company or not.
WARRANTY | policy