8/12/2019 ABC Tile Adhesive Heavy Duty

1/1

ALLGEMEINE-BAU-CHEMIE PHIL. INC.Tel.: (+63 2) 842-6891 Fax: (+63 2) 842-7146E.mail: abc@abc.ph Website: http://www.abc.ph

1

2

3

Open Time:Open time is the period when themortars adhesive strength ismost effective. Adjust and alignaccordingly within the specifiedopen time only (picture 1).Lapsed open time may result tobonding failure. It is recommendedto carry out random checks every

5 m 2 to determine whether theback of the tiles are fully coveredwith adhesive.

Finger Check:To ensure that open time hasnot lapsed, check if the tileadhesive mortar still adheres toyour fingers to avoid bondingfailure (picture 2). If open timehas lapsed, remove theadhesive layer and throw away.CAUTION: DO NOT add anewly prepared batch of TILEADHESIVE to a previously mixed batch.HEAVY-DUTYNOTE: For special applications, such as glass mosaic tile

installations, the addition of Redifix is recommended.Cleaning:If excess mortar adheres on the tile face, remove with clean water

COVERAGEDependent on substrate condition, size of tiles and applicationthickness, 25 kg of ABC TILE ADHESIVE willHEAVY-DUTYcover approx. 5 m 2 (using 30 cm x 30 cm tiles

COLOR & PACKAGINGAvailable in 5kg and 25kg. Colors available in white and gray.

CLEANING & SAFETYRemove excess mortar on tools using clean water. Non-toxic.However, as with any cementitious material, avoid prolongedskin contact.

STORAGE & SHELF LIFEWhen stored in a cool, dry place and in its original packaging,it will remain usable for a period of one year from date ofmanufacture.

WARRANTYDue to the variety of applications, the differing methods of working, the variousproperties of bases, etc., we cannot assume responsibility or liability with regardto the application of our products. Our guarantee and liability are restricted to thequality of our products at the time of acceptance of the customer of such products.In no case shall our liability extend beyond replacement of defective products, ifany, found at the time of acceptance. For all deliveries and services, our GeneralSales Condition, including warranties stipulated for each case are valid.

ABC TILE ADHESIVE has the addition ofHEAVY-DUTYadvanced acrylic polymer modifiers for heavy-duty bondingstrength. It ensures a flexible adhesive bed in order to resistthermal movements. ABC TILE ADHESIVE isHEAVY-DUTY

primarily designed for large format tile installations (e.g., buildingfacade), tiling on non-concrete substrates (e.g., gypsum & fibercement boards, plywood, metal) and for areas exposed to directsunlight (e.g., lanai, terrace, pool area).

USES:- for installation on plywood, gypsum board and other non-

concrete materials and substrates- for vertical or overhead tile installations such as building

facades and other outdoor areas- for dense tiles (e.g., vitrified, homogenous & granite tiles)- for commercial tile installations and industrial sites where

pedestrian traffic is heavy (e.g., warehouse, parking area,garage or factory floor area).

SURFACE PREPARATIONThe substrate must be fully cured, structurally stable and level,smooth, clean and free from dirt, dust, loose material, oils,chemicals and other contaminants. Acid, etch or abrade (roughenthe bonding surfaces) to ensure proper bonding.

APPLICATION INSTRUCTIONSMixing: Into a plastic or metal pail containing clean water,pour a sufficient quantity of ABC TILE ADHESIVEHEAVY-DUTYthat may be used within the POT LIFE of 4 hours.Pot life is the time during which the mixed tile adhesive canbe applied while sitting in a non-absorptive container.CAUTION: Use only a plastic pail or a galvanized ironsheet as a mixing base. Never use any absorbent materialsuch as plywood, wooden box, gypsum board or cardboard as it will change the consistency of the mix. 25 kgof ABC TILE ADHESIVE needs approximatelyHEAVY-DUTY8 liters of water. Stir with a mixing device or by hand. Wait15 minutes, then mix again briefly before use. NOTE: Duringhot and windy conditions, wet the substrate lightly beforeapplying TILE ADHESIVE .HEAVY-DUTY

Application: Spread ABC TILE ADHESIVEHEAVY-DUTYmortar evenly over 1 m 2area at a time using a notched

trowel.

Installation: Fix the tiles immediately within the adhesivesOpen Time of 20 minutes .

2

1