abacus 5000 5 easy steps - spirent abacus 5000 familiarize the user with the ‘5 easy steps’ to...
TRANSCRIPT
ABACUS 50005 easy steps to start a test
November 2007
P/N 71-002990 Rev. A
This example: Setting up Abacus to test a Trunking Gateway – SIP to PSTN
Page 1
Purpose of 5 Steps
Provide the user with general procedures and guidelines for configuring Abacus 5000
Familiarize the user with the ‘5 Easy Steps’ to configure and run a test using Abacus 5000
This illustration is only an example of how to configure Abacus 5000 and may not fully apply to the user’s application. Refer to the user manuals and online Help available in the Abacus Application Software
Page 2
Hardware Setup
System Controller Factory Default IP ConfigurationIP address: 10.30.14.214 IP mask: 255.255.254.0 Gateway IP: 10.30.14.1
PCG3ICG3
Back Cards
T1 (RJ48) Fast Ethernet (RJ45)
Fast Ethernet (RJ45)
T1 (RJ48)
Abacus 5000
Trunking Gateway
Page 3
Diagram
E1/T1
Trunking Gateway
Analog PhonesSIP End Points
Abacus 5000PCG3 Card ICG3 Card
10/100/1000
Ethernet
This example includes a Trunking Gateway as a system under test (SUT) without Media Gateway Controller (MGC)
Page 4
5 Easy Steps to setup a test
1.
2.
3.
4.
5.
Channels
Protocol Selection
Partition and Timing
T1 - Phone Book
Start/Stop the Test
SIP - Phone Book
Page 5
Step 1. Protocol Selections
Slot Number
Type of Card
Type of Signaling
Carrier
Subscriber or Exchange
Companding Law u-law a-law
Frame ESF/D4
Line Coding B8ZF/AMI
Circuit Description
Page 6
Step 1. Protocol Selections
System Under Test Configuration
Page 7
Step 1. Protocol Selections
Audio Codec for RTP
T1/E1 CAS Protocol
Page 8
Step 1. Protocol Selections
Select and disable the channels that are not being used in order to keep the test simple
Page 9
Step 1. Protocol Selections
Select Port 0
Number of Channels
IP Configuration
Page 10
Step 1. Protocol Selections
VoIP Protocol Configuration
Page 11
Step 2. Channels
Select the “3 Tone” for a simple path confirmation
Page 12
Step 2. Channels
For more advanced path confirmations and quality measurements, select “Advanced”
Page 13
Step 3. Partition and Timing
Split Screen
Select the Interface for Configuration
“Originate” / “Terminate” assignment
Page 14
Step 3. Partition and Timing
Link Channels
Only “24”Channels
Page 15
Step 3. Partition and Timing
Call Timing can remain as default
Page 16
Step 3. Partition and Timing
The Scripts for Originate and Terminate can remain the same as the default
Page 17
Step 3. Partition and Timing
Page 18
Step 3. Partition and Timing
Select the configure button for the SIP Phone book
Page 19
Step 4. Phone Book
Select the configure button for the SIP Phone book
Page 20
Step 4. Phone Book
User Name
URI Domain
Subnet Mask
GatewayEnd Point IP Address
Own Phone Numbers
Number of End Points
Page 21
Step 4. Phone Book
External Phone Numbers
Phone Number to Call
Page 22
Step 4. Phone Book
T1 Subscribers
Own and External Phone number configuration
Phone number to call
Page 23
Step 5. Start the Test
Start the Test
Spirent Communications, Inc.26750 Agoura RoadCalabasas, CA 91302 USA
Support ContactsU.S. EuropeE-mail: [email protected] E-mail: [email protected]: http://support.spirentcom.com Web: http://support.spirent.comToll Free: +1 800-SPIRENT (+1 800-774-7368) Phone: +33 (0) 1 61 37 22 70Phone: +1 818-676-2616 Fax: +33 (0) 1 61 37 22 51Fax: +1 818-880-9154
ChinaE-mail: [email protected]: http://support.spirentcom.com.cnToll Free: +1 800-810-9529 (mainland China only)Phone: +86 10 8233 0033 (rest of the world)Fax: +86 10 8233 0022
Copyright© 2007 Spirent Communications, Inc. All Rights Reserved. All of the company names and/or brand names and/or product names referred to in this document, in particular, the name "Spirent" and its logo device, are either registered trademarks or trademarks of Spirent plc and its subsidiaries, pending registration in accordance with relevant national laws. All other registered trademarks or trademarks are the property of their respective owners. The information contained in this document is subject to change without notice and does not represent a commitment on the part of Spirent Communications. The information in this document is believed to be accurate and reliable, however, Spirent Communications assumes no responsibility or liability for any errors or inaccuracies that may appear in the document.