ab1000-poe series unmanaged industrial gigabit poe
TRANSCRIPT
AB1000-POE SEriES unmAnAgEd induStriAl gigABit POE EthErnEt SwitchES
Zum Hagenbach 7 • D-48366 Laer • Fon: +49 (0)2554/9130-00 • Fax: +49 (0)2554/9130-10 • [email protected]
CA
T-A
B10
00-V
1 E
N e
d. 0
5/16
Wel
ote
c G
mb
H
1
General Data aB1000-POe-21SFP-G03 aB1000-POe-42SFP-G06 aB1000-POe-82SFP-G10
Series AB1000
Type Unmanaged
Ethernet layer Layer-2
Ports (total) 3 6 10
Copper ports 2 4 8
SFP ports 2 2 2
PoE ports 2 4 8
Connector TX RJ45
IEEE 802.3 10BaseT / CSMA/CD (Ethernet)
IEEE 802.3i 10BaseT
IEEE 802.3u 100BaseTX/T4/FX (Fast Ethernet)
IEEE 802.3ab 1000BaseT(X) (Gigabit Ethernet over UTP)
IEEE 802.3z 1000BaseF(X) (Gigabit Ethernet over Fiber)
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at Power over Ethernet Plus (PoE+)
IEEE 802.3x Full Duplex and Flow Control
Unmanaged Industrial Gigabit Switches with PoE. Two, four or eight 10/100/1000BaseTX PoE ports and one or two 10/100/1000 Mbps SFP ports are available depending on model. The Switches support the standards IEEE802.3af and IEEE802.3at for PoE and PoE+. The maximum PoE output power is 15.4 W at IEEE 802.3af and 30 W at IEEE 802.3at. The divices are ideally suited for DIN rail mounting.
CA
T-A
B10
00-V
1 E
N e
d. 0
5/16
Wel
ote
c G
mb
H
2Zum Hagenbach 7 • D-48366 Laer • Fon: +49 (0)2554/9130-00 • Fax: +49 (0)2554/9130-10 • [email protected]
www.welotec.com
Auto MDI-X Yes
Autonegotation Full-, Halfduplex
Speed 10/100/1000 Mbps
Amount MAC adresses 2048 4096
Backplane speed 12 Gbps 20 Gbps
Power supply V DC 12 – 40 V DC / 48 – 57 V DC (PoE)
Power supply connector Terminal block 3-pin
PoE output power 15.4 W (IEEE 802.3af) / 30 W (IEEE 802.3at)
Housing material Metal
Schutzklasse IP40
Dimensions (W x H x D) 43 x 80 x 110 mm 47 x 128 x 105 mm 45 x 165 x 145 mm
Installation DIN rail
Operating temperature range -40 - +75 °C
Storage temperature range -40 - +75 °C
Humidity 5 - 95 % (non condensing)
FCC Title 47, Part 15, Class B
EMC EN 55022, Class B
Safety EN 60950
MTBF time 300.000 hours
10/100/1000BaseTX PoE 2 ports 4 ports 8 ports
10/100/1000 Mbps SFP 1 port 2 ports 2 ports
AB1000-POE SEriESunmAnAgEd induStriAl gigABit POE EthErnEt SwitchES
acceSSOrieS DeScriPtiOn POwer SuPPly
SDR-120-48 DIN rail power supply, -25 - +70 °C, 48 V DC, 120 W
SDR-240-48 DIN rail power supply, -25 - +70 °C, 48 V DC, 240 W
AccESSOriES (OPtiOnAl)
CA
T-A
B10
00-V
1 E
N e
d. 0
5/16
Wel
ote
c G
mb
H
3Zum Hagenbach 7 • D-48366 Laer • Fon: +49 (0)2554/9130-00 • Fax: +49 (0)2554/9130-10 • [email protected]
www.welotec.com
AB1000-POE SEriESunmAnAgEd induStriAl gigABit POE EthErnEt SwitchES
A: System LED Indicator / B: RJ45 PoE Ports / C: Gigabit SFP Port
A: System LED Indicator / B: RJ45 PoE Ports / C: Gigabit SFP Ports
CA
T-A
B10
00-V
1 E
N e
d. 0
5/16
Wel
ote
c G
mb
H
4Zum Hagenbach 7 • D-48366 Laer • Fon: +49 (0)2554/9130-00 • Fax: +49 (0)2554/9130-10 • [email protected]
www.welotec.com
AB1000-POE SEriESunmAnAgEd induStriAl gigABit POE EthErnEt SwitchES
A: System LED Indicator / B: RJ45 PoE Ports / C: Gigabit SFP Ports
CA
T-A
B10
00-V
1 E
N e
d. 0
5/16
Wel
ote
c G
mb
H
5Zum Hagenbach 7 • D-48366 Laer • Fon: +49 (0)2554/9130-00 • Fax: +49 (0)2554/9130-10 • [email protected]
www.welotec.com
PlEASE nOtE BEfOrE inStAllAtiOn
Please confirm the following things before installation:1. If the PoE port meets the power requirement of the connecting devices.2. If the PoE standard requirement and power supply matches with the power receiving device.
(1/2+ 3/6- (End-span) / 4/5+ 7/8- (Mid-span))3. If the output power of the matched power adapter is compatible with the specification in the label of the PoE switch.
Please install the PoE switch according to the following steps:1. Put the PoE switch on the surface of a large and stable table, or professional industrial installation rank mount. 2. Connect Positive, Minus and Earth terminals as indicators on the power adapter.3. Connect the network devices to the PoE switch port though network cable.
Note:1. Please do not put heavy products on the PoE switch, and please ensure good ventilation environment for the oE switch. 2. Please cut off the power first before plugging the power adapter.
Power:Connect the power cable, plug it into power socket, turn on the power, then the switch will automatically initialize, and LED lights status will display as following:1. Except the POE port lights, all the other lights will go through the process of “on-off-on-off”, which means the system
restoration is successful. 2. Power LED remains lit.
Note:If initialization is inconsistent with the above, please check the power.
leD inDicatOr StatuS DeScriPtiOn
PWR / SYSLED green ON Normal
LED green OFF Power OFF
PoE
LED green ON Connected to Powered Device (PD), PoE working properly
LED green Blink Short circuit or current overload
LED green OFF No connected Powered Device (PD) or PoE power OFF
LINK
LED yellow ON Link is OK
LED yellow Blink Link is OK and data is being sent and received
LED yellow OFF Link failure and no data transmission
L/A (SFP)
LED green ON Link is OK
LED green Blink Link is OK and data is being sent and received
LED green OFF Link failure and no data transmission
Note: Please confirm that the all PoE ports of PD devices are complying with IEEE802.3af/at standard.
Power Industrial Terminals: 48 V DC (46 - 57 V DC), More than 50VDC is recommended when used PoE+ output, 110 - 240 V AC, 50/60 Hz power supply
PoE-Port: The PoE ports support PoE function, which can transmit data and power simultaneously if connected matching device. The LED lights on the front panel can show working status of each port.
Ethernet-Ports: Besides PoE ports, other ports are normal self-sensing Ethernet RJ45 ports which support Auto MDI/MDIX, plug and play. The LED lights on the front panel can show working status of each port.