Aardvark-HD3M Waterproof Wireless Inspection Camera for Android & iPhone

Sold and supported in the United States, buy the Aardvark-HD3M at CircuitSpecialists.com

Wi-Fi Endoscope CameraUser Manual

Contents

3

Contents

General InformationManualNotesStorage and transportInformation on disposal

44444

OverviewDescriptionApplicationsSafety

5555

Technical Data 6Functions

Product detailsStart to usePC usersiPhone and iPad usersAndroid smartphone usersOther platform users

7789101112

Other information 1313Wi-Fi Bridge function

Troubleshooting 14

General Information

Manual:This operation manual allows you to work safely with theWi-Fi Endoscope. Please keep this manual for yourInformation.Liability is void for any damage caused by not followingthis manual.

Notes:

Warning!Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Attention!Not following this note can cause permanent damage to the device.

Tips!Useful information.

Storage and transport:Improper transport can harm the device.

Always transport this device in the provided box in order to prevent damage.

Information on disposal:Electronic equipment does not belong into domesticwaste, but must be disposed in accordance with theapplicable statutory provisions.

Information

4

This new Wi-Fi Endoscope camera is a portable, hand-held, multifunctional inspection camera system featuring an ultra-small size of 8.5mm diameter camera, a high quality digital sensor offering crystal clear output. The powerful wireless module provides a stable Wi-Fi connection. Users can view the videos on iPhones, iPads, Android devices and PCs, as well as capturing images (JPG)and recording 720p HD videos (AVI) with the bundled application.

This premier tool is an economical solution for: Automotive / Diesel Repair and Maintenance Inspection of hard-to-reach or hard-to-see area or

equipment Plumbing, construction, restoration applications Science Education Outdoor Exploration

Applications

This appliance is not intended for medical use or personal inspection.

Overview

5

Description

Keep the tool dry, clean, free from oil, water, gas or

other materials capable of causing corrosion.

This appliance is not intended for use by persons

with limited physical, sensory or mental capabilities.

Keep bystanders, children away while operating the

tool.

Do not overreach, keep proper footing and balance

at all times.

Safety

Technical Data

Description Data

Network Standard IEEE 802.11 b/g/n

Antenna Built-in IPEX antenna

Operating Frequency 2.4GHZ

Data Rate 802.11 a/b/g/n: up to 150Mbps

Camera Diameter 8.5mm

Shaft Diameter 7.0 mm

Image Sensor 2.0 Megapixel CMOS

Video Resolution 800x600,1024x768,1280x720

Viewing angle 60°

Depth of Field 60mm—100mm

Camera Light Source 6 adjustable high-intensity LEDs

IP Code IP67

LED Flash light 1W CREE LED

Operating Temperature 32°to 113°F (0 °to 45°C)

Power Source 4XAA battery

Max battery life 2-3 hours

Certifications CE RoHS

Technical D

ata

6

Product Details

1 2 3

45 6 7

1.Phone Holder2.LED Adjust wheel3.Battery compartment4.Camera5.Flash light6.Flash light On/Off7.String8.Probe connector9.Support for Phone holder10.Reset hole11.Power On/Off

(LED Indicator: the LED willshine BLUE when the deviceis On, or shine RED whenthe battery voltage is low)

9

10

8

Functions

7

11

Start to useS

tart to use

8

Open the battery compartment Insert 4 AA batteries

Please use Alkaline or rechar-geable Ni-MH battery for longworking time.

Please ensure correct polarity

Press the Power On/Off button to turn on the device Fit the phone holder to the support if you want to

use the device with a smartphone attached.

Now the Wi-Fi Endoscope is ready to use, you canconnect your PC, iPhone, iPad or Android smartphone to this device to view, capture photos or record videos.

PC users

PC

U

SER

S

9

Search the Wi-Fi signalSSID is “ WiFi_Endoscope”

Connect your PC to the Wi-FiEndoscope.Password is 00000000

Copy the software: ”Smart Camera.exe” from thebundled CD to your PC and run.

Select” IP Camera: Wifi Endoscope”in the device menu, then you cansee the live video in Preview area.

Preview area

Record video

Take photo

Select deviceSet resolution

Camera settings

Photo and VideoAlbum

Change Wi-Fi nameand password

iPhone and iPad usersiP

hone and

iPad

10

Search” WiFi Endoscope” oniTunes Store and install the app.

Enter “Settings”-”Wi-Fi settings” and searchthe SSID:”WiFi_Endoscope”, connect to itwith password:00000000

Run the app and select” Wifi Endoscope”, thenyou can see the live video in Preview area.

Preview area

Take photo Record video

Photo and video album

Android smartphone users

And

roid

11

Enter “Settings”-”Wi-Fi settings” and search the SSID”WiFi_Endoscope”, connect to it with password:00000000

Run the app and select” Wifi Endoscope”, then you can seethe live video in Preview area.

Preview area

Take photo Record video

Search ”WiFi Endoscope”On Google Play Store andinstall the app.

Please do not select the check box of” Check for Internetservice” in the advanced Wi-Fi settings menu.

Other platformO

ther platform

12

Users with devices running other platforms can watch thevideo with an Internet browser (HTML5 support required).After connected to this Wi-Fi Endoscope, open the InternetBrowser and go to: http://192.168.1.1, you can see the webpage as below, press the button” Preview Camera” to enter thevideo page to watch the live video.

You can also enter this URL directly to watch the video:http://192.168.1.1:8080/stream_simple.html

Wi-Fi Bridge function

Other info

13

Users can connect to internet with” Wi-Fi Bridge” function.You can connect to other Wi-Fi access point which has internetaccess and use Wi-Fi Endoscope at same time. Connect your PC or Smartphone to this Wi-Fi Endoscope Open an internet browser and go to: http://192.168.1.1 Enter: Network—WiFi Bridge menu, you will see a webpage

as below. Click ”Scan” button to search other Wi-Fi signal in your

area, then click” Join” button to establish connection withthe access point(Wi-Fi password may required).click“Save & Apply” button to save the setting.

Now you can use the Wi-Fi Endoscope with internet access.

TroubleshootingTroubleshooting

14

No image or defects, noise in the image-Check whether the probe is connected to the handlebody correctly or reconnect the probe.-Check the battery polarity to make sure it’s correct.-If batteries are exhausted, replace the batteries.

LED lights are dim or blink-Batteries are Low

Shut down the device and turn on again when it’s notfunctioning normally.

Forgot password-Use a pin to press the reset key for 7 seconds to resetthe settings of the device.The default password is 00000000

If you have two or more Wi-Fi Endoscope devices and want to use them at the same time, you need to make sure that all the devices have different SSID, otherwise you’ll need to change it manually.

© NT/Nov 2013 WF200 V3-EN