aap support training anritsu cat support – north america

AAP Operator Training

Anritsu CAT Support – North [email protected]

[email protected]

mailto:[email protected]

mailto:[email protected]

Course Contents• Introduction/Course Overview…• System Overview

– Hardware– Software– Execution– Results

• AAP Detailed Operation• When problems occur• Practical demonstration building and running a

sequence• Practice with Results Processing

3

Introduction/Course Overview

• Anritsu Automation Platform (AAP)• AAP System Components • AAP System Diagram

4

Anritsu Automation Platform (AAP)

• AAP PC Connects to the system via IP connection (system switch)

• AAP was developed to add features that were requested by Key Customers for CAT testing

• To create a common easy to operate interface for the ME7834

• To add reporting features not currently available

5

AAP System Diagram

6

Course Contents• Introduction/Course Overview• System Overview




8

System Overview - Hardware

• DELL Optiplex 790 USFF

• Windows 7 64-Bit

• 17 – 22 Inch Display

• Only Two connections

Ethernet Cable

Power cord

9

System Overview - Hardware

• AAP Control PC– Runs Windows 7 64-bit– Connects with the instruments in the following

way:• LAN – This is an IP address Ethernet connection to the

HP Procurve Gigabit Switch– Provides common face for the system– Connection to Customer Network without

modifying RTD or PCT PC operating system

10

System Overview - Software

• Run the software from the task bar

• Shortcuts are also available from Start>All Programs>Anritsu

• Turn off power saving mode in OS

11

System Overview - SoftwareAAP PC RTD PC

Program ICONS

12

System Overview - Software• AAP allows the user to:

– Import test templates– Build sequences of tests– Run the test sequences– Modify proxy file COM ports– Modify IOT parameter file– Select PCOM programming– Collect and manage result files (AAP

Results)– Create reports

14

System Overview – Software

Templates are used to distribute tests• Templates are divided into groups of tests or

archives.• Templates are distributed with the CAT library

release.– No templates are included with the AAP installers.

System Overview - Software

• The CAT software release notes will contain:– A list of tests included in the release.

• Including the template (or .ini) file for the tests.– Any additional components needed by tests.– Additional tests for engineering purposes.

16





25

AAP Detailed Operation • AAP PC is on same IP subnet as RTD PC

– 1.1.1.100 (Default)– 255.0.0.0 (Subnet)

• Import the palette– C:\Anritsu\AAP\Configuration Files

• Ping connectivity established between components• UE has Anritsu USIM• Proxy files must exist on AAP PC

– C:\Anritsu\AAP\UE

26

AAP Detailed Operation

• Test operation is controlled from two main windows– AAP Execution– AAP Results

• AAP server must be running on RTD PC

Begin

End

Creating A Proxy File

Selecting A Template

Creating A Test Sequence

Selecting A UE

Stopping A Test Sequence

Step 3

Step 4

Step 5

Step 7

Step 8

Viewing Test ResultsStep 9

Starting TestExecStep 1

Starting AAP Results GUIStep 2

Starting A Test SequenceStep 6

(optional)

(optional)

AAP Detailed OperationAAP Server

• AAP Server must be running on RTD PC before starting the AAP PC programs.

28

AAP Detailed Operation1. Starting TestExec

OR

29

AAP Detailed Operation 2. Starting Results GUI

OR

30

AAP Detailed Operation 3. Creating/Editing a Proxy File

31

AAP Detailed Operation 4. Selecting Templates

Palette File

32

AAP Detailed Operation5. Creating a Test Sequence

Highlight the desired test steps and drag them into the Main section of the

Sequence File

33

AAP Detailed Operation6. Starting a Test Sequence

Click here to run the sequence.A report will be shown at the

sequence end.

Click here to run the sequence.Enter the UE serial number

at the prompt.A report will be shown at the

sequence end.

37

AAP Detailed Operation – 7. Selecting a UE

A pull down listappears when the xml

files are stored in the UEfolder.

Change the COM portto avoid editing the

UE proxy file.

Click here to have AAPrun the PCOMM

programmer.

The window will close after pressing OKor if the “Time Left” bar runs out.

38

AAP Detailed Operation 7a. Editing IOT Parameters

Select a value from the pull down listsand click OK.

Type the requiredUE information

before pressing OK.

The window will close after pressing OKor if the “Time Left” bar runs out.

39

AAP Detailed Operation – 7. Selecting a UE

Select UE will create a global parameterFile in C:\Anritsu\AAP\ConfigurationFilesThis module will send the proxy fileonly when a UE is selected.IOT_Config.prm is always sent.

40

AAP Detailed Operation – Test Run Module

41

AAP Detailed Operation – Test Run Module

RTD PC folder with the execution batch file

Echo OFFsetlocalset PATH=C:\Program Files\Anritsu\Rapid Test Designer\4.7.0\cli;%PATH%

Echo ONmd "C:\RTD_Results\Anritsu___Proxy___b0___Idle Mode - Registration___TC-2.1.2.1.1_USIM___January_14_2012_17_00_36"Call CLIRun Run -Archive "T-Mobile_USA_UMTS_Protocol_Test_Package_2_4_0_A" -Test "TC-2.1.2.1.1_USIM" -Analyze No -Save No -ResultFormat XML -ResultOutput Both -ResultFolderPath "C:\RTD_Results\Anritsu___Proxy___b0___Idle Mode - Registration___TC-2.1.2.1.1_USIM___January_14_2012_17_00_36"move "C:\Program Files\Anritsu\Rapid Test Designer\4.7.0\bin\AT-MMI_log.txt" "C:\RTD_Results\Anritsu___Proxy___b0___Idle Mode - Registration___TC-2.1.2.1.1_USIM___January_14_2012_17_00_36\AT-MMI_log000.txt"ping 127.0.0.1 -n 10 > NUL

Batch file example

This module is displayed for every test step in the sequence.

42

AAP PC RTD PC

AAP Detailed Operation – Module Communication

43

AAP Detailed Operation – 8. Stopping a Sequence

The STOP button will beenabled after the AT MMI

proxy starts runningon the RTD PC.

Click on Terminate Execution.

Click the STOP button.

44

AAP Detailed Operation9. Viewing Results

Click on the headings to sort

RTD Report Link

45

AAP Detailed OperationResults GUI

46

AAP Detailed OperationResults GUI – Filtering Results

47

AAP Detailed OperationResults GUI – Filtering Results

48

AAP Detailed OperationResults GUI – Create Report

49

AAP Detailed OperationReports Location

50

AAP Detailed OperationResults GUI – HTML Report

51

AAP Detailed OperationResults GUI – HTML Report

52

AAP Detailed OperationResults GUI – Settings

53

AAP Detailed OperationResults GUI – Settings

The results and log files are automatically copied from the RTD PC to the AAP PC form locations specified in these controls. In the configuration shown above, the files from RTD PC in C:\RTDTest and C:\RTD_Results will be copied to C:\RTD_Results in the AAP PC. By clicking on each of the check boxes above, the column with the selected name is displayed or not displayed. ON/OFF. When on, results files from previous test will be copied from the RTD PC to the AAP PC and displayed on the screen.

Will store the results shown in the results window in a file c:\Anritsu\AAP Results\TestCases_<date>_<time>.html and .xml. After the results are saved, the screen is cleared. Will store the results in a comma delimited file. A file dialog window will pop up. Select the file name with the extension “.csv”

54

AAP Detailed OperationResults GUI - Folder

55

AAP Detailed OperationResults GUI – RTD_Results Folder

56

AAP Detailed OperationResults GUI – RTD_Results Folder

57

AAP Detailed OperationResults GUI

58

AAP Detailed OperationResults GUI – CLI Log

59

AAP Detailed OperationRTD PC

60

AAP Detailed OperationAAP Server on RTD PC

Port must matchResults GUI port.

61

AAP Detailed OperationRTD Reports on AAP PC

62

AAP Detailed OperationRTD Reports on AAP PC

63





64

When Problems Occur• If you are having trouble with operating the

system – Review the Quick Start Guide and Installation

Manuals– Perform Ping connectivity check– Ensure AAP TCP Server is running on RTD PC– Screen saver should be turned off– Ensure RTD and CAT Library installed per the

release notes

65

When Problems Occur• Review CLI output log• Check Results directory to make sure all results were

processed• If there are many older RTD results when you run

AAP the first time, it may take 10-30 minutes to process results folder

• Some results are stored in C:\RTD_Results\Filtered Results

• TestStand output is stored were sequence was saved• Make sure Archive is entered into RTD, and all

patches applied (jar files in correct place)

66

When Problems Occur

• Make sure that the Windows Regional and Language options are set to English (United States)

• Make sure you are logged in as administrator and application is running as administrator

• Ctrl+Alt+Shift+Insert to change between operator and editor mode in TestStand

67

When Problems Occur

• If a particular test case is not working as expected – Ensure it is validated, see the release notes– Run the test case from the RTD PC under C:\test

directory, just double click the bat file to run– Send the output to a file and email file with ATMMI

proxy to support engineer– Any other information (proxy file, screen shots,

etc.)

68

When Problems Occur

69

When Problems OccurEcho OFFsetlocalset PATH=C:\Program Files\Anritsu\Rapid Test Designer\4.7.0\cli;%PATH%

Echo ONmd "C:\RTD_Results\Anritsu___Proxy___b0___Idle Mode - Registration___TC-2.1.2.1.1_USIM___January_14_2012_17_00_36"Call CLIRun Run -Archive "T-Mobile_USA_UMTS_Protocol_Test_Package_2_4_0_A" -Test "TC-2.1.2.1.1_USIM" -Analyze No -Save No -ResultFormat XML -ResultOutput Both -ResultFolderPath "C:\RTD_Results\Anritsu___Proxy___b0___Idle Mode - Registration___TC-2.1.2.1.1_USIM___January_14_2012_17_00_36"move "C:\Program Files\Anritsu\Rapid Test Designer\4.7.0\bin\AT-MMI_log.txt" "C:\RTD_Results\Anritsu___Proxy___b0___Idle Mode - Registration___TC-2.1.2.1.1_USIM___January_14_2012_17_00_36\AT-MMI_log000.txt"ping 127.0.0.1 -n 10 > NUL

70

When Problems Occur

71

When Problems Occur

72

When Problems Occur

Verify that the clocks are

advancing and some traffic activity is shown.

73

When Problems Occur

Verify that the LabVIEW server

is set to Run-Time Engine .

Verify that the Version is set to

10.0.1 (2010 SP1).

74

When Problems Occur

Verify that the TestStand Search

Directories include C:\Anritsu and its

subdirectories.

75



• AAP Detailed Operation• When problems occur• Demonstration: building and running a sequence• Practice with Results Processing

76

Practical Demonstration Building and Running a

Sequence1. Open Software2. Log In (Administrator -> Login)3. Edit Sequence 4. Create New sequence5. Save Sequence As <filename>6. Exit Sequence

77

Practical Demonstration

78


79


80


81


82


83





84

Practice with Results Processing

85


86


87


88


89


90


• Questions (?)

91

aap support training anritsu cat support – north america

Documents