aai question paper format

8/8/2019 AAI Question Paper Format

http://slidepdf.com/reader/full/aai-question-paper-format 1/11

1) What is the use of RADAR

2) COHO in MTI Radar uses which freq.?

3) CMRR of amplifier?

4) Binary to hexadecimal conversion?

5) Decimal to hexadecimal conversion?

6) Firewalls are used for?

7)Full form of FPGA?

8) Numerical based on Duty cycle and peak power?

9) IF transmitted power is increased by 16 than range is increased by a) 16, b)8, c)4, d) none

of these?

10) 10.AGC is used in which of the stage a) receiver b) oscillator c) both a and b d) none of

these?

11)Delayed AGC is used for which purpose?



12) Question based on the value of mirroring?

13) Question based on RAID.

14) Bridge is used for which of the OSI layer?

15) questions are based on various OSI layer and TCP/IP.

16)Which type of feedback is used in amplifier a) +ve b) -ve c) both a and b d) none of these?

17) question based on i/p impedance of transmission line of a given wavelength.

18) What is three things for workstations of DNS server?

19) Which of the followinf is free-running?a)monostable multivibrator ,b)astable

multivibrator, c)both a and b, d) none of these?

20) questions based on voltage and current source.

AAI PAPER ON 9th NOVEMBER AT DELHI

Question paper consists of two sections:

Section I: non-technical

Section II: technical

SECTION I1.general knowledge

2. general english (fill in the blanks, error correction, one word is given and u have to check



that the use of given word is correct in the options given or not, and some other questions)3. reasoning( coded relations questions and other questions)

4. questions of intelligence

SECTION II

Subjects in technical section are:1.Radar 2.Communication

3.Linear/digital device4.Computer networking

Some technical questions that I remember are:

1.Radar is used for?2.COHO in MTI Radar uses which freq.?

3.CMRR of amplifier?4.Binary to hexadecimal conversion?

5. Decimal to hexadecimal conversion?6.Firewalls are used for?

7.Full form of FPGA?8.Numerical based on Duty cycle and peak power?

9.IF transmitted power is increased by 16 than range is increased by a) 16, b)8, c)4, d) none of these?

10.AGC is used in which of the stage a) receiver b) oscillator c) both a and b d) none of these?11.Delayed AGC is used for which purpose?

12.Question based on the value of mirroring?13.Question based on RAID.

14.Bridge is used for which of the OSI layer?15. 5-6 questions are based on various OSI layer and TCP/IP.

16.Which type of feedback is used in amplifier a) +ve b) -ve c) both a and b d) none of these?17.question based on i/p impedance of transmission line of a given wavelength.

18.What is three things for workstations of DNS server?19.Which of the followinf is free-running?a)monostable multivibrator ,b)astable multivibrator,

c)both a and b, d) none of these?20. 2-3 questions based on voltage and current source.

21. One question of VCO.

NOTE: There might be some mistakes as I don¶t remember the questions exactly.....

AAI PAPER ON 9th NOVEMBER AT DELHI

Question paper consists of two sections:

Section I: non-technical


SECTION I

1.general knowledge



2. general english (fill in the blanks, error correction, one word is given and u have to check that the use

of given word is correct in the options given or not, and some other questions)

3. reasoning( coded relations questions and other questions)


SECTION II

Subjects in technical section are:

1.Radar

2.Communication

3.Linear/digital device

4.Computer networking

Some technical questions that I remember are:

1.Radar is used for?

2.COHO in MTI Radar uses which freq.?

3.CMRR of amplifier?

4.Binary to hexadecimal conversion?

5. Decimal to hexadecimal conversion?

6.Firewalls are used for?

7.Full form of FPGA?

8.Numerical based on Duty cycle and peak power?

9.IF transmitted power is increased by 16 than range is increased by a) 16, b)8, c)4, d) none of these?

10.AGC is used in which of the stage a) receiver b) oscillator c) both a and b d) none of these?

11.Delayed AGC is used for which purpose?

12.Question based on the value of mirroring?

13.Question based on RAID.

14.Bridge is used for which of the OSI layer?

15. 5-6 questions are based on various OSI layer and TCP/IP.

16.Which type of feedback is used in amplifier a) +ve b) -ve c) both a and b d) none of these?

17.question based on i/p impedance of transmission line of a given wavelength.

18.What is three things for workstations of DNS server?

19.Which of the followinf is free-running?a)monostable multivibrator ,b)astable multivibrator, c)both a

and b, d) none of these?

20. 2-3 questions based on voltage and current source.

21. One question of VCO.

Airport Authority Of India Placement Paper

The AAI written Question paper consists of two sections:



1. Non Technical

2. Technical

Section 1:

There are 4 types of questions in the section 1.

These are:1. GK (General Knowledge questions)

2. General EnglishThe general english test questions are fill in the blanks type, errors, others(r.saggarwal)

3. Reasoning4. Other (puzzles, etc.)

Section 2: The subjects for the section 2 are Microwave & Radar, Communication, Linear - DigitalDevices, Networking (CN)

Important sample technical questions for AAI Placement Test: electronics (engineering), communication, electrical, b.tech

What is a radar used for?

Which frequency do we use in MTI radar (COHO)?

What do you mean by CMRR of an amplifier?

Conversion related questions (binary to hexadecimal, decimal to hex)

Numericals (peak power)

What do you mean by FPGA?

In which OSI layer do we use the bridge?

Various other questions based on OSI Layer (Computer networking questions), TCP/IP protocols

(multiple choice type)

Why do we use a delayed AGC?

Numericals based on voltage & current sources.

What is VCO?

Why do we use firewalls?

What is mirroring, RAID, etc.



Relation between transmitted power & range. If we increase power by 16, range increases by ?

Where do we use an AGC in a circuit?

(reciever, oscillator, both, ?)

What kind of feedback is used in an amplifier? (A question similar to this)

is free running. a)monostable multivibrator b)astable c)both d)none

Find input impedance of a transmission line.

Question about Workstations of DNS Server.









9) IF transmitted power is increased by 16 than range is increased by a) 16, b)8, c)4, d) none of

these?

10) 10.AGC is used in which of the stage a) receiver b) oscillator c) both a and b d) none of

these?











19) Which of the followinf is free-running?a)monostable multivibrator ,b)astable multivibrator,

c)both a and b, d) none of these?


2) Airport authority of India ± AAI Placement Paper, written test held on 8th

November, 2008 at Delhi 3) The AAI written Question paper consists of two sections:

4) 1. Non Technical

5) 2. Technical 6) Section 1: 7) There are 4 types of questions in the section 1.8) These are:

1. GK (General Knowledge questions)9) 2. General EnglishThe general english test questions are fill in the blanks type, errors,

others(r.s aggarwal)10) 3. Reasoning

4. Other (puzzles, etc.)

Section 2: The subjects for the section 2 are Microwave & Radar, Communication, Linear ± Digital



Devices, Networking (CN)

Important sample technical questions for AAI Placement Test: electronics (engineering), communication, electrical, b.tech

11) What is a radar used for?

12) Which frequency do we use in MTI radar (COHO)?13) What do you mean by CMRR of an amplifier?

14) Conversion related questions (binary to hexadecimal, decimal to hex)

15) Numericals (peak power)16) What do you mean by FPGA?

17) In which OSI layer do we use the bridge?18) Various other questions based on OSI Layer (Computer networking questions), TCP/IP

protocols (multiple choice type)19) Why do we use a delayed AGC?

20) Numericals based on voltage & current sources.21) What is VCO?

22) Why do we use firewalls?23) What is mirroring, RAID, etc.

24) Relation between transmitted power & range. If we increase power by 16, range increases by ?

25) Where do we use an AGC in a circuit?26) (reciever, oscillator, both, ?)

27) What kind of feedback is used in an amplifier? (A question similar to this)««««« is free running. a)monostable multivibrator b)astable c)both d)none

28) Find input impedance of a transmission line.29) Question about Workstations of DNS Server.

30) See other latest detailed placement papers, job test, written exam question papers, solvedmultiple choice type problems, sample questions and lots more for freshers, walkins,

entrance and more.











9) IF transmitted power is increased by 16 than range is increased by a) 16, b)8, c)4, d) none of these?

10) 10.AGC is used in which of the stage a) receiver b) oscillator c) both a and b d) none of these?









19) Which of the followinf is free-running?a)monostable multivibrator ,b)astablemultivibrator, c)both a and b, d) none of these?


What is a radar used for?

Which frequency do we use in MTI radar (COHO)?

What do you mean by CMRR of an amplifier?

Conversion related questions (binary to hexadecimal, decimal to hex)

Numericals (peak power)

What do you mean by FPGA?

In which OSI layer do we use the bridge?



Various other questions based on OSI Layer (Computer networking questions), TCP/IPprotocols (multiple choice type)

Why do we use a delayed AGC?

Numericals based on voltage & current sources.

What is VCO?

Why do we use firewalls?

What is mirroring, RAID, etc.

Relation between transmitted power & range. If we increase power by 16, range increasesby ?

Where do we use an AGC in a circuit?

(reciever, oscillator, both, ?)

What kind of feedback is used in an amplifier? (A question similar to this) is free running. a)monostable multivibrator b)astable c)both d)none

Find input impedance of a transmission line.

Question about Workstations of DNS Server

Question paper consists of two sections:Section I: non-technical


SECTION I

1.general knowledge2. general english (fill in the blanks, error correction, one word is given and u have to check

that the use of given word is correct in the options given or not, and some other questions)3. reasoning( coded relations questions and other questions)


SECTION IISubjects in technical section are:1.Radar

2.Communication3.Linear/digital device

4.Computer networking



Some technical questions that I remember are:1.Radar is used for?

2.COHO in MTI Radar uses which freq.?3.CMRR of amplifier?

4.Binary to hexadecimal conversion?

5. Decimal to hexadecimal conversion?6.Firewalls are used for?7.Full form of FPGA?

8.Numerical based on Duty cycle and peak power?9.IF transmitted power is increased by 16 than range is increased by a) 16, b)8, c)4, d) none of

these?10.AGC is used in which of the stage a) receiver b) oscillator c) both a and b d) none of these?

11.Delayed AGC is used for which purpose?12.Question based on the value of mirroring?

13.Question based on RAID.14.Bridge is used for which of the OSI layer?

15. 5-6 questions are based on various OSI layer and TCP/IP.16.Which type of feedback is used in amplifier a) +ve b) -ve c) both a and b d) none of these?

17.question based on i/p impedance of transmission line of a given wavelength.18.What is three things for workstations of DNS server?

19.Which of the followinf is free-running?a)monostable multivibrator ,b)astable multivibrator,c)both a and b, d) none of these?

20. 2-3 questions based on voltage and current source.21. One question of VCO.

NOTE: There might be some mistakes as I don't remember the questions exactly.....

aai question paper format

Documents