[AA Fan and Fixture BoxesFor more detailed description of components, see Page 7.

9336-NKFR

9350-KFR

9350-FRBK

9351-NKFR

9365-NKFR

CatalogNumber

20.5 9335-NFR

20.5 9335-NKFR

16.0 9336-NFR

16.0 9336-NKFR

22.5 9350-FR

22.5 9350-KFR

ComponentDescription

3-1/2" diameter side nail mount fanand fixture box*

3-1/2" diameter side nail mount fanand fixture box, speed klamps

3-1/2" diameter side nail mount fanand fixture box*

3-1/2" diameter side nail mount fanand fixture box, speed klamps

4" diameter surface nail mount fanand fixture box*

4" diameter surface nail mount fanand fixture box, speed klamps

4" diameter "Strong 'O' Bar" fanand fixture box, speed klamps,

individual carton

4" diameter "Strong 'O' Bar" fanand fixture box, speed klamps,

bulk packed

4" diameter side nail mount fanand fixture box*

4" d:' - • • ,'jnt fanaii'. - • - . < • • • , • . • ; . . , - . _,-;. .; . . '>.!! . , . . ;.irnps

4" diameter side nail mount fanand fixture box, HL hanger,

speed klamps

4" diameter "Strong 'O' Bar" fanand fixture box, speed klamps,

individual carton4" diameter "Strong 'O' Bar" fanand fixture box, speed klamps,

bulk packed

4" diameter surface mount fanand fixture box, 2 wire clamps

' 'noufit hanger fan.qi.iu iix:,.. • . • 2 wire'clamps;;^

4" diameter pan fan box1/2" deep pan

4" diameter pan fan box1/2" deep pan, speed klamps

'SPEED "K" KLAMPS INCLUDED--BULK PACKED

i^%22.5 9350-FRBK\Hf

22.5 9350-FRBKB

22.5 9351-NFR

22.5 9351-NKFR

ji*Hi,; |15.0 9365-NKFR'Hw1*

J*MV^JIS.O 9365-FRBK

1^15.0 9365-FRBKBV.«v'

16.0 9369-FB

16.0 9369-FBHsi|S|is lllfSgiiyiiJIiBa«lSl ltl»J-l(BI 8 0|i!

I.**^ 8.0

12.09370-FR9371-FR

9365-FRBK

Rated for fan weight up to 35 Ibs.Two hour wall/ceiling fire rated

9369-FB

OutsideDimensionsD W

1-5/8

1-5/8

1-5/8

STD. STD.PKG. PKG.QTY. WT.

2-7/8 3-1/2 41201 50 28

2-7/8 3-1/2 41202 50 28

2-5/16 3-1/2 10304 50 23

2-5/16 3-1/2 10305 50 23

2-3/8 4 10458 50 21

2-3/8 4 10459 50 21

2-3/8 4 10464 20 39

2-3/8 4 10465 20 32

2-3/8 4 65001 50 26

2-3/8 4 65002 50 26

9369-FBH

75392 50 23

10679 20 45

10684 20 43

1-5/8

1-5/8

1-1/22-3/4

4

4

44

76500

76501

7660076801

25

25

5050

12

18- •••»-!«!?#• MI

1317

9370-FR9371-FR

Rated for fixture weight up to 50 Ibs.Mounting hardware and instructions supplied

Meets latest NEC requirementsReference 370-27 Outlet Boxes

410-16 Means of Support422-18 Support of Ceiling Fans

Listed 714LOutlet Box

18 Allied Moulded Products, Inc. • Bryan, Ohio • Phone: 419-636-4217 • FAX: 800-237-7269 • www.alliedmoulded.com

Fiberglass Box Features AA ®

Tough. Impact-Resistant Material

Allied fiberglass outlet boxes are the Contractors Choice for a variety of reasons:

Impact Resistant• Allied Moulded switch and outlet boxes are molded of impact-resistant, high-strength

fiberglass reinforced thermoset polyester material.

• Allied's superior dimensional stability prevents warping. During the molding process, the resinsystem used undergoes a chemical change resulting in a cross-linking of molecules. Thisprocess enhances strength while prohibiting brittleness from cold winter temperatures anddistortion from summer's high heat.

NonconductivityDue to the nonconductivity of Allied fiberglass boxes, they do not have to be grounded making installation safer, easier, and faster.

2-Hour Wall & Ceiling fire ClassificationAll Allied Moulded fiberglass boxes are classified by Underwriters Laboratories for use in 2-hour rated walls or ceilings. During anactual fire test set up in a U.L. laboratory, Allied boxes passed all of the test criteria outlined in U.L. Standard 263 for both walls andceilings. Look for our classification CEYY "Outlet Boxes and Fittings Classified for Fire Resistance" in U.L.'s Fire Resistance Directory.

The U.L. reports from this testing process are available for examination upon request.

• File R9379-1 Fire Test Wall

• File R9379-2 Fire Test Ceiling

Allied offers the largest, most complete line of box sizes and attachment brackets in the industry for a wide variety of uses. A few ofthe most popular attachments are:

1. The "S" snap bracket or a "W" wing bracket for old work box installation.

2. Universal or "UB" and 24" bar hangers for maximum support of ceiling boxes used as fixture support.

3. The "B" adjustable stabilizing bar, available on the 2, 3, or 4 gang boxes for more secure mountings.

4. "Z" brackets with metal spurs to secure wall boxes to wood or steel studs.

A. Offset gauge marks — box has a positive stop for the proper wallthickness.

B. Bright common nails or pierce-point screws fit securely in speciallydesigned supports. Angled for easy installation.

C. Counter sink tapped device holes for easy installation. *D. Cubic inch capacity clearly marked. *E. Proudly U.L. Listed. ;; ' *F. Knockouts on fiberglass boxes are complete, reducing drafts and

easily removed.G. Leveling ribs for support and square alignment to studs.H. Z brackets designed to securely hold box to wood or steel stud.

Bracket also gives proper 1/4" or 1/2" offset.I. 2-HR Fire RATED clearly marked for easy inspector identification.J. K or C clamps.

Allied Moulded Products, Inc. • uryan, Ohio • Phone: 419-636-4217 • FAX: 800-237-7269 • www.alliedmoulded.com

Attachment Codings AAComponent descriptions and ordering informationWe want it to be as easy as possible for you to locate the right switch and outlet boxes to meet your needs.Most basic boxes can accommodate a number of letter-coded components. When applicable, ground strapsmay be ordered by adding the suffix "G" to the basic catalog number (i.e., 9305-G). Wire clamps are orderedby adding the letter "C" plus the number of clamps desired (i.e., 2300-NC2). "K" klamps may be added at noextra cost to the customer by adding the letter "K" to most catalog numbers (i.e., 2300-NK). Check catalog forparts available with "C" or "K" clamp variations.

NNails are installed asfastening devices.

ssPierce point sheetmetal screws areinstalled for easypenetration of steelstuds.

HFHF hanger whichmounts flush on theside of the stud, hasspurs which hold thehanger to the stud foreasier nailing.

EEars are securelymolded into the box.

When wing bracketscrews are tightened,the box is drawn firmlyagainst the wall.

Snap bracket pushesthrough opening inwallboard, then snapsout on the back side.

11 K"

factory Installed• Catalog numbers with the

suffix "C" indicate factoryinstalled wire clamps. Seeprice sheet for cost.

• Catalog numbers with thesuffix "K" indicates factoryinstalled non-metallic speedklamps. No added cost. KlampFor example: 2300-NC4 or 2300-NK.The number following the "C"indicates the number of wire clampsi.e., "C4" -4 wire clamps.

Bulk PackAsteric (*) in description columnindicates "K" speed klamps bulk packedor "C" clamps for some items. See Page 15.

The grounding strap onoutlet boxes permits thelighting fixture to begrounded when necessary.Available on round boxes.

*"G"

GroundStrap

HLHL hanger whichmounts on the side ofthe stud or joist, hasspurs which hold thehanger to the joist foreasier nailing.

IThe Z hanger whichmounts on stud face,has spurs to securethe hanger to wood andsteel studs. Seecatalog for offsetvariations.

BThe adjustablestabilizing bar isavailable on the 2,3, 4 gang boxesused in conjunctionwith Nails or Zhangers.

HNApplication is quickand easy becausenails are alreadyinstalled on this HNhanger for wall orceiling boxes.

21Z hangers are installedon both sidesof the box.

UBUniversal BarHanger adjustablebar assembly foreither 16" or 24"stud spacing.

Allied Moulded Products, Inc. • Bryan, Ohio • Phone: 419-636-4211 • FAX: 800-237-7269 • www.alliedmoulded.com