a107320201-digital signal processing
TRANSCRIPT
-
8/3/2019 a107320201-Digital Signal Processing
1/8
Code No: A107320201 Set No. 1
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABADIII B.Tech. II Sem., I Mid-Term Examinations, February 2011
DIGITAL SIGNAL PROCESSINGObjective Exam
Name: ______________________________ Hall Ticket No.
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 20.
I Choose the correct alternative:
1. The process of down sampling is same as [ ]
A. Time shifting B. Time scaling C. Folding D. Amplifying
2. The necessary and sufficient condition for BIBO stability is [ ]
A. B. C. D.
3. The reflection of the signal is given by [ ]
A. Shifting B. Amplifying C. Folding D. Time scaling
4. In linear time invariant system, the |H(w)| and
-
8/3/2019 a107320201-Digital Signal Processing
2/8
Code No: A107320201 :2: Set No.1
II Fill in the blanks:
11. The impulse response of the system can also be obtained by computing the ________of the stepresponse of the system
12. Number of complex multiplications in direct DFT are ___________
13. In linear system response to the sum of the weighted inputs is ___________ the sum of weighted
responses
14. An N-point sequence is called ________ if it is symmetric about point zero on the circle
15. Appending zeros to a sequence in order to increase its length is called ____________
16. The twiddle factor of an inverse DFT using an FFT algorithm is ____________
17. The poles of a stable system lies in _________ of s-plane
18. In overlap save method the overlapped samples in one of the output sequences are
______________
19. In an N-point DFT of a finite duration sequence x(n) of length L, the value of N should be such
that ____________
20. The ___________ of a signal can be obtained by sampling one period of Fourier transform of thesignal
-oOo-
w.jntuworld.com
www.jntuworld.com
-
8/3/2019 a107320201-Digital Signal Processing
3/8
Code No: A107320201 Set No. 2JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
III B.Tech. II Sem., I Mid-Term Examinations, February 2011DIGITAL SIGNAL PROCESSING
Objective ExamName: ______________________________ Hall Ticket No.
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 20.
I Choose the correct alternative:
1. In linear time invariant system, the |H(w)| and
-
8/3/2019 a107320201-Digital Signal Processing
4/8
Code No: A107320201 :2: Set No.2II Fill in the blanks:
11. An N-point sequence is called ________ if it is symmetric about point zero on the circle
12. Appending zeros to a sequence in order to increase its length is called ____________
13. The twiddle factor of an inverse DFT using an FFT algorithm is ____________
14. The poles of a stable system lies in _________ of s-plane
15. In overlap save method the overlapped samples in one of the output sequences are______________
16. In an N-point DFT of a finite duration sequence x(n) of length L, the value of N should be suchthat ____________
17. The ___________ of a signal can be obtained by sampling one period of Fourier transform of the
signal
18. The impulse response of the system can also be obtained by computing the ________of the step
response of the system
19. Number of complex multiplications in direct DFT are ___________
20. In linear system response to the sum of the weighted inputs is ___________ the sum of weightedresponses
-oOo-
w.jntuworld.com
www.jntuworld.com
-
8/3/2019 a107320201-Digital Signal Processing
5/8
Code No: A107320201 Set No. 3JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
III B.Tech. II Sem., I Mid-Term Examinations, February 2011DIGITAL SIGNAL PROCESSING
Objective ExamName: ______________________________ Hall Ticket No.
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 20.
I Choose the correct alternative:
1. The order of input and output sequence in computing IDFT using FFT is [ ]
A. Both are in normal order B. Both are in bit reversed order
C. Normal order and bit reversed order respectively D. Bit reversed order and normal order
2. A FFT algorithm for the DFT can be developed by [ ]
A. Adopting a subtract and divide approach B. A even number of samples of the given sequence
C. Adopting a divide and conquer approach D. Adding all samples
3. The DFT of the sequence x(n) = {1,0,-1,0} is [ ]A. {0,0,-2,2} B. {0,0,2,2} C. {2,2,0,0} D. {-2,2,0,0}
4. The order of input and output sequence in computing DFT using DIT-FFT is [ ]
A. Both are in normal order B. Both are in bit reversed orderC. Normal order and bit reversed order respectively D. Bit reversed order and normal order
5. In order to implement the specified difference equation of the system, the required basic operations
are [ ]A. Addition, delay and multiplication B. Shifters and delay elements
C. Multiplexers, dividers and shifters D. Multiplexers and counters
6. The process of down sampling is same as [ ]
A. Time shifting B. Time scaling C. Folding D. Amplifying
7. The necessary and sufficient condition for BIBO stability is [ ]
A. B. C. D.
8. The reflection of the signal is given by [ ]A. Shifting B. Amplifying C. Folding D. Time scaling
9. In linear time invariant system, the |H(w)| and
-
8/3/2019 a107320201-Digital Signal Processing
6/8
Code No: A107320201 :2: Set No.3
II Fill in the blanks:
11. The twiddle factor of an inverse DFT using an FFT algorithm is ____________
12. The poles of a stable system lies in _________ of s-plane
13. In overlap save method the overlapped samples in one of the output sequences are______________
14. In an N-point DFT of a finite duration sequence x(n) of length L, the value of N should be suchthat ____________
15. The ___________ of a signal can be obtained by sampling one period of Fourier transform of the
signal
16. The impulse response of the system can also be obtained by computing the ________of the stepresponse of the system
17. Number of complex multiplications in direct DFT are ___________
18. In linear system response to the sum of the weighted inputs is ___________ the sum of weighted
responses
19. An N-point sequence is called ________ if it is symmetric about point zero on the circle
20. Appending zeros to a sequence in order to increase its length is called ____________
-oOo-
w.jntuworld.com
www.jntuworld.com
-
8/3/2019 a107320201-Digital Signal Processing
7/8
Code No: A107320201 Set No. 4JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
III B.Tech. II Sem., I Mid-Term Examinations, February 2011DIGITAL SIGNAL PROCESSING
Objective ExamName: ______________________________ Hall Ticket No.
Answer All Questions. All Questions Carry Equal Marks.Time: 20 Min. Marks: 20.
I Choose the correct alternative:
1. The DFT of the sequence x(n) = {1,0,-1,0} is [ ]
A. {0,0,-2,2} B. {0,0,2,2} C. {2,2,0,0} D. {-2,2,0,0}
2. The order of input and output sequence in computing DFT using DIT-FFT is [ ]
A. Both are in normal order B. Both are in bit reversed order
C. Normal order and bit reversed order respectively D. Bit reversed order and normal order
3. In order to implement the specified difference equation of the system, the required basic operations
are [ ]A. Addition, delay and multiplication B. Shifters and delay elementsC. Multiplexers, dividers and shifters D. Multiplexers and counters
4. The process of down sampling is same as [ ]
A. Time shifting B. Time scaling C. Folding D. Amplifying
5. The necessary and sufficient condition for BIBO stability is [ ]
A. B. C. D.
6. The reflection of the signal is given by [ ]
A. Shifting B. Amplifying C. Folding D. Time scaling
7. In linear time invariant system, the |H(w)| and
-
8/3/2019 a107320201-Digital Signal Processing
8/8
Code No: A107320201 :2: Set No.4II Fill in the blanks:
11. In overlap save method the overlapped samples in one of the output sequences are
______________
12. In an N-point DFT of a finite duration sequence x(n) of length L, the value of N should be such
that ____________
13. The ___________ of a signal can be obtained by sampling one period of Fourier transform of the
signal
14. The impulse response of the system can also be obtained by computing the ________of the step
response of the system
15. Number of complex multiplications in direct DFT are ___________
16. In linear system response to the sum of the weighted inputs is ___________ the sum of weightedresponses
17. An N-point sequence is called ________ if it is symmetric about point zero on the circle
18. Appending zeros to a sequence in order to increase its length is called ____________
19. The twiddle factor of an inverse DFT using an FFT algorithm is ____________
20. The poles of a stable system lies in _________ of s-plane
-oOo-
w.jntuworld.com