8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4

COPYRIGHT @ 2016Ingersoll Rand

ALL RIGHTS RESERVED

CAD GENERATED DRAWING,NO MANUAL REVISIONS ALLOWED

DRAWING CONFORMS TOISO 1101

DO NOT SCALE DRAWING

PROPRIETARY NOTICE

UNLESS OTHERWISE SPECIFIED PRINTED DOCUMENT IS UNCONTROLLED

UNLESS OTHERWISE SPECIFIED:- REMOVE ALL BURRS AND SHARP CORNERS- WELD SYMBOLS TO BE IN ACCORDANCE WITH NFE 52-109 1-2

THIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS GIVEN TO THE RECEIVER IN CONFIDENCE. THE RECEIVER BY RECEPTION AND RETENTION OF THE DRAWING ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES THAT, EXCEPT AS AUTHORIZED IN WRITING BY INGERSOLL-RAND CO. IT WILL (1) NOT USE THE DRAWING OR ANY COPY THEREOF OR THE CONFIDENTIAL OR TRADE SECRET INFORMATION THEREIN; (2) NOT COPY THE DRAWING; (3) NOT DISCLOSE TO OTHERS EITHER THE DRAWING OR THE CONFIDENTIAL OR TRADE SECRET INFORMATION THEREIN; AND (4) UPON COMPLETION OF THE NEED TO RETAIN THE DRAWING, OR UPON DEMAND, RETURN THE DRAWING, ALL COPIES THEREOF, AND ALL MATERIAL COPIED THEREFROM.

WARNING: THE EXPORT OR REEXPORT OF THIS DRAWING OR A PRODUCT PRODUCED BY THIS DRAWING IS SUBJECT TO U.S. EXPORT ADMINISTRATION REGULATIONS AND OTHER APPLICABLE GOVERNMENT RESTRICTIONS OR REGULATIONS.

DWG NO.

PART NO.

ESTIMATED WEIGHT(KG UNLESS OTHERWISE SPECIFIED)A1

NAME

SIZE

MODEL SHEET

REVISION

SCALE

FIRST ANGLE PROJECTION

R

300.5 [11.8]DRUM LENGTH

500[19.7]

450

[17.

7]FL

AN

GE

DIA

ME

TER

342

[13.

5]B

AR

RE

L D

IAM

ETE

R 793.81 [31.3]

4X 18 [.71]WINCH MOUNTING

556 [21.9]WINCH MOUNTING

606 [23.9]

4.5 [.2] 21 [.8]

14.5 [.6] 420 [16.5]

14.5 [.6] 4.5 [.2]

21 [.8]

25

[1.0

] 25

[1.0

]

506

[19.

9]

1[.0

4] 2

5[1

.0]

1[.0

4]

271.4[10.7]

146

.5[5

.8]

614

.5[2

4.2]

177.2[7.0]

102.9[4.1]

184.5[7.3]

235.5[9.3]

MATERIAL

Material PN:

STANDARD TOLERANCES

ALL DIMENSIONS ARE IN MILLIMETERS

[ INCHES (IF SHOWN)]UNLESS OTHERWISE SPECIFIEDTOLERANCES ON DIMENSIONS

TO BE IN ACCORDANCE WITH ISO 2768 mH

BREAK EDGES 0.3 A 45°

Ingersoll-Rand Industrial Technologies

REVISIONSAPP'DDRAWNDATEDESCRIPTIONECNREVZONE

GWM01-03-17ADDED PENDANT CONTROL TO SHEET 2 VIEW1170672C

DRAWN DATE

GWM 08-13-13CHECKED DATE

APPROVED DATE

AAJ 08/26/13DRAWING TYPE

Detail DrawingNOMENCLATURE

45980208

GENERAL ARRANGEMENT MANRIDER WINCH MR150K GENERAL ARRANGEMENT MAN RIDER WINCH MR150K

SEE TABLE 45980208 45980208 C0.10 MR150K 2 OF 1

For Internal Use:Model=45980208|ASSEM|C.2|Gary W. Moen|04-Jan-17 08:30:35 AM|Open<>Drawing=45980208|DRAW|C.1|Gary W. Moen|04-Jan-17 08:30:35 AM|Open

C.1

Specifications : - Rated working load : 150 kg- Lifting speed (with rated load) : 0 to 30 m/min at 6.3bar- Free air consumption : 0 to 2.5 m3/min- Working pressure range : 5 to 7 bar- Recommended rope diameter : 10 mm- Weight without rope : about 210 kg- Working rope capacity : 54 m on 2 layers- Total rope storage capacity : 154 m on 5 layers

On Request : - 3.1b material traceability certificates according toDIN 50049 (EN 10204) for load bearing parts- Witness test by Third Party (DNV, Lloyd’s, ABS,etc)

Standard Features / Equipment : - Two independent auto brakes: an internal multidisc brake and external drum band brake.- Stainless Steel throttle lever returns to off position and locks when released- High efficiency planetary gearing is inside drum for better protection and minimum overall dimensions- Overload protection device (torque limiter)- Main air emergency stop- Emergency lowering device- Slack wire detector- Upper & lower limit switch assembly mounted inside drum- Assisting spooling device – for better rope winding at no load. (Press roller)- Stainless Steel Drum Guards- Braided Stainless Steel Hoses- Geomet coated fasteners- Grooved drum (for wire rope 10 mm)- Air prep package includes Water separator - Filter – Regulator – Lubricator- Sandblasting and offshore paint 290 µ- Installation and operation manual- ABS and DNV type approved with CE certification- Design temperature TD = -20° C

NOTE:VIEW CONFIGURATIONS THIS SHEET ARE FOR VERTICAL ROPE TAKE-OFF SEESHEET 2 FOR 30 DEGREE AND HORIZONTAL ROPE TAKE-OFF CONFIGURATIONS

STAINLESS STEELEMERGENCYLOWERINGDEVICECONTROL BOX

DRUM CL

STAINLESS STEELEMERGENCY

LOWERINGDEVICE

RESERVOIR

AIR PREPGUARDING

MOTORGUARDING

DRUM GUARDSREMOVED INTHIS VIEW

THIS VIEW SHOWS DECK MOUNTING HOLES THAT INCORPORATEFA150KG(i)MR, LS150RLP AND LS2-150RLP DECK MOUNTING PATTERNS.

BOTTOM VIEW

PRESS ROLLER ASSEMBLY

VERTICAL TAKE OFFROPE ENTRY

SLACK LINEDETECTOR

WATER SEPARATOR

REGULATOR

LUBRICATORFILTER

BRASS 3-WAY VALVEAIR INLET ANDEMERGENCY AIRINLET 3/4 NPT

LIMIT SWITCH ADJUSTMENT ACCESSSTAINLESS STEELPIPE NIPPLES

GEOMET COATED LIFT SWIVEL RINGS

LIFT TO SHIFTMANUAL THROTTLE

SCALE 0.250

RELEASED 06/Jan/2017 11:13:06 GMT

8 7 6 5 4 3 2 1

8 7 6 5 123

D

C

B

A

D

C

A

B

4

UNLESS OTHERWISE SPECIFIED PRINTED DOCUMENT IS UNCONTROLLED

PROPRIETARY NOTICETHIS DRAWING CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION, IS THE PROPERTY OF INGERSOLL-RAND CO., AND IS GIVEN TO THE RECEIVER IN CONFIDENCE. THE RECEIVER BY RECEPTION AND RETENTION OF THE DRAWING ACCEPTS THE DRAWING IN CONFIDENCE AND AGREES THAT, EXCEPT AS AUTHORIZE D IN WRITING BY INGERSOLL-RAND CO. IT WILL (1) NOT USE THE DRAWING OR ANY COPY THEREOF OR THE CONFIDENTIAL OR TRADE SECRET INFORMATION THEREIN; (2) NOT COPY THE DRAWING; (3) NOT DISCLOSE TO OTHERS EITHER THE DRAWING OR THE CONFIDENTIAL OR TRADESECRET INFORMATION THEREIN; AND (4) UPON COMPLETION OF THE NEED TO RETAIN THE DRAWING, OR UPON DEMAND, RETURN THE DRAWING, ALL COPIES THEREOF, AND ALL MATERIAL COPIED THEREFROM.

NAME

A1SCALE SHEET

REVISIONSIZE

NOMENCLATURE

DWG NO.

PART NO.

GENERAL ARRANGEMENT MANRIDER WINCH MR150K

GENERAL ARRANGEMENT MAN RIDER WINCH MR150K

45980208

45980208 C0.30 45980208 2 OF 2

C.1

SHOWN IN VERTICAL ROPETAKE-OFF CONFIGURATIONWITH OPTIONAL PENDANTCONTROL

OPTIONAL:376mm [14.8] TALL PEDESTAL.PEDESTAL FEATURES STAINLESS STEEL FORMED SIDEPLATES WITH DECKMOUNTING HOLES THAT INCORPORATE FA150KG(i)MR, LS150LRP ANDLS2-150RLP DECK MOUNTING PATTERNS.THESE DECK MOUNT PATTERNS ARE DETAILED ON SHEET 1

OPTIONAL: SLACKLINE ARM MOUNTEDMANUAL ROPE GUIDE

OPTIONAL:OPERATORORIENTATIONGUARDING(FOR USE WITHLEVER CONTROLONLY)

SCALE 0.300

STAINLESS STEELDRUM GUARDS

OPTIONAL:PILOTPENDANTCONTROL

HORIZONTAL ROPE TAKE-OFFCONFIGURATION DETAILS

BRAIDED STAINLESS STEEL HOSES WITHSTAINLESS STEEL OR BRASS FITTINGS

STAINLESS STEEL UPRIGHTS

STAINLESS STEEL BASE RAILS

30 DEGREE ROPE TAKE-OFFCONFIGURATION DETAILS

STAINLESS STEEL SLACKLINE ARMS

STAINLESS STEEL CROSSBARS

C

RELEASED 06/Jan/2017 11:13:06 GMT