a w arrant ti o y o.com/warrant n lite y wner’s manual ee...
TRANSCRIPT
This package should consist of:
1111 W. 35th Street, Chicago, IL 60609 USAwww.tripplite.com/support
NetDirector Console KVM Switch (8- or 16-Port) or
Rackmount KVM Switch (16-Port)Models: B020-U08-19-K, B020-U08-19KTAA, B020-U16-19-K or B022-U16
Note: Follow these instructions and operating procedures to ensure correct performance and to prevent damage to this unit or to its connected devices.
Copyright © 2010 Tripp Lite. All rights reserved. All trademarks are the property of their respective owners.
WARRANTy
RegISTRATIo
N
Reg
ister
onlin
e to
day fo
r a
chan
ce to
win
a F
Ree Trip
p Lite
p
roduct
! www.tr
ipplit
e.co
m/w
arra
nty
owner’s Manual
• (1)B020-U08-19-K,B020-U08-19KTAA,B020-U16-19-Kor B022-U16KVMSwitch
• (8)P778-006USB/PS2ComboKVMCableKits*
• (2)P778-006USB/PS2ComboKVMCableKits**
• (1)USB/PS2ComboConsoleCableKit
• (1)RJ45toDB9FirmwareUpgradeCable
• (1)C13to5-15PPowerCord*
• (1)ACPowerAdapter(Input:100-240V,50/60Hz,0.5A/Output:5.3V, 2.4A)**
• (1)CDwithOwner’sManual
• (1)QuickStartGuide
• (1)GroundingWire
• (1)RackmountHardwareKit
• (1)SetofRubberFeet***B020-U08-19-K,B020-U08-19KTAAorB020-U16-19-Konly
**B022-U16only
Checktoseethattheunitarrivedundamaged,withallofitscontents.Contactyourdealerifthereisaproblem.
1
1. Features 3
2. System Requirements 32.1 Computer 3
2.2 Console 3
2.3 Cables 3
3. Introduction 43.1 Front View of Console KVM Switch 4
3.2 Rear View of Console KVM Switch 5
3.3 Front View of B022-U16 5
3.4 Rear View for B022-016 6
4. Installation 64.1 Pre-Installation Safety Instructions 6
4.2 Rackmounting Instructions for Console KVMs 7
4.3 Rackmounting for B022-U16 8
4.4 grounding 8
4.5 Single-Station Installation 8
4.6 Multiple-Station (Daisy-Chained) Installation 8
4.7 Multiple Station (Cascaded) Installation 9
4.8 Hot Plugging 9
5. Basic operation 95.1 opening the NetDirector Console KVM 9
5.2 Closing the NetDirector Console KVM 9
5.3 LCD oSD (on-Screen Display) Configuration 10
5.4 Sharing USB Peripheral Devices 10
5.5 Powering off and Restarting 10
6. Hotkeys 116.1 Invoking the Hotkey Mode 11
6.2 Port ID Numbering 11
6.3 Selecting the Active Port 11
6.4 Auto Scanning 12
6.5 Starting Auto Scan 12
6.6 Pausing in Auto Scan 12
6.7 Skip Mode 12
6.8 Hotkey Beeper Control 12
6.9 Computer Keyboard/Mouse Reset 12
6.10 Quick Hotkey Control 13
6.11 oSD Hotkey Comtrol 13
6.12 Port oS Control 13
6.13 Restore Default Values 13
6.14 Hotkey Summary Table 13
7. oSD (on-Screen Display) operation 147.1 oSD overview 14
7.2 Logging-In for the First Time 14
7.3 oSD Invocation Sequence 14
7.4 oSD Navigation 14
7.5 oSD Main Screen Headings 14
7.6 oSD Functions 15
8. Firmware Upgrade Utility 188.1 Before you Begin 18
8.2 Starting the Upgrade 19
8.3 Upgrade Succeeded 19
8.4 Upgrade Failed 19
8.5 Firmware Upgrade Recovery 20
9. Appendix A 209.1 Specifications 20
9.2 oSD Factory Default Settings 21
10. Appendix B 2110.1 FCC Radio/TV Interference Notice 21
11. Warranty 21
12. Warranty Registration 21
Table of Contents
2
1. Features• IntegratedKVMconsolewith19”LCDfortheB020-U08-19-K,B020-U08-19KTAAandB020-U16-19-K.
• B020-U08-19-K,B020-U08-19KTAAandB020-U16-19-Kcomewith(8)P778-SeriesUSB/PS2ComboKVMCableKits.
• B020-U08-19-K,B020-U08-19KTAAandB020-U16-19-Kcomewithanexternalconsoleport,allowinganexternallocalconsole(PS/2orUSB)tobeconnected.AnadditionalUSBportisincludedonthefrontpaneloftheB020-U08-19-K,B020-U08-19KTAAorB020-U16-19-Kforusewithanexternalmouse.
• DualInterface:supportscomputerswithPS/2orUSBkeyboardsandmice.
• Keyboardandmouseemulation(PS/2andUSB)allowsforsimultaneousbootingofcomputersevenwhentheconsolefocusiselsewhere.
• ExternalUSBportallowsforsharingofUSB1.1peripheralsamongallportsontheKVMswitch*.
• Multiplatformsupport:supportsWindows®(2000,XP,Vista,7),Linux,Mac®andSun.
• SupportsmultimediaUSBkeyboardsforPC,MacandSun.
• Daisy-chainupto31additionalB022-016orB022-U16KVMSwitchestoconnectupto512computers.
• Daisy-chainedstationpositionisautomaticallysensed—noneedformanualDIPswitchsettings.
• B022-U16KVMSwitchescanbecascadedoffofB020-008-17-IPandB020-016-17-IPSwitches**.
• StationIDLEDindicatestheswitchesstationposition.
• Nosoftwarerequired.
• Selectacomputerviapush-buttons,HotkeysorOnScreenDisplay(OSD)menus.
• Auto-scanfeatureallowsforcontinuousscanningofmultiplecomputers.
• HotPluggable:add/removecomputerswithoutpoweringdowntheKVMswitch.
• Twolevelpasswordsecurity:onlyauthorizedUserscanviewandcontroltheconnectedcomputers.(UptofourUsersandoneAdministrator.)
• Superiorvideoquality:supportsresolutionsupto2048x1536fortheB022-U16and1280x1024fortheB020-U08-19-K,B020-U08-19KTAAorB020-U16-19-K.
• Rackmountablein19”racksystem(1U).
• Firmwareupgradeable.*USB1.1peripheralsharingfunctionworksonlywhenusingtheUSBCableKitconnections.**Aseparatefirmwareupgradeisrequiredforcascading.(SeeFirmwareUpgradeonPage18fordetails.
2. System Requirements
2.1 Computer
2.2 Console*
2.3 Cables
2.4 operating Systems
AVGA,SVGAorMultisynccomputerwithanHD15port•Note: The max resolution for the B020-U08-19-K, B020-U08-19KTAA or B020-U16-19-K is 1280 x 1024, and 2048 x 1536 for the B022-U16. The resolutions of the connected computers must not exceed these limits.
Either:
AminiDIN6(PS/2)keyboardandmouseport.1.
AUSBType-Aport.2.
AVGA,SVGA,orMultisyncmonitorcapableofthehighestresolutionthatyouwillbeusingonanysystemintheinstallation•
APS/2orUSBstylemouse•
APS/2orUSBstylekeyboard•*OptionalexternalconsoleportsareincludedontheNetDirectorConsoleKVMSwitches.
ThisKVMswitchrequiresthefollowingcustom-wiredpremiumcables:
Function Tripp Lite PartToConnectaPS/2orUSBComputertotheKVM P778-SeriesPS/2orUSBComboKVMCableKit
Daisy-ChainCables P772-SeriesDaisy-ChainCables
oS VersionWindows 2000 and higher
LinuxRedHat 7.1andhigher
LinuxSuSE 9.0andhigher
LinuxMandriva(Mandrake) 9.0andhigher
UNIXAIX 4.3andhigher
oS VersionUNIXFreeBSD 4.2andhigher
UNIXSun Solaris8andhigher
NovellNetware 5.0andhigher
Mac OS9andhigher
DOS 6.22
3
Handle 1. PulltoslidetheKVMmoduleout;pushtoslidethemodulein(seeitem13inthistable).
LCD Display 2. AfterslidingtheKVMmoduleout,flipupthecovertoaccesstheLCDmonitor.
LCD Controls 3. TheLCDOn/Offswitchislocatedhere,aswellasbuttonstocontrolthepositionandpicturesettingsoftheLCDdisplay.Seepage10fordetails.
Station/Port Switches 4. PressthePort IDup/downbuttonstoswitchtotheportbefore/afterthecurrentlyselectedport.PresstheStation IDup/downbuttonstoswitchtothestationbefore/afterthecurrentlyselectedstation.
LeDs 5. Online Port LEDs• –Thereare8or16LEDs(dependingonthenumberofports)atthetopofthekeyboardpanelwhichilluminateorangewhenacomputerisconnectedandpowered-on.
Port ID LED• –AnumericalLEDdisplaysthenumberoftheportwhichcurrentlyhasthefocusoftheKVMswitch.
Station ID LED• –AnumericalLEDdisplaysthestationnumberoftheKVMswitchthatcurrentlyhasthefocusoftheconsole.
Keyboard6.
Touchpad7.
Power LeD 8. Lightsbluetoindicatethattheunitisreceivingpower.
Rackmounting Tabs 9. Therackmountingtabslocatedateachcorneroftheunitsecurethechassistoasystemrack.Refertopage7forrackmountingdetails.
Lock LeDs 10. TheNumLock,CapsLock,ScrollLockLEDsarelocatedhere.
Reset Switch 11. LocatedtotherightoftheLockLEDs.Pressthisrecessedswitchinwithathinobjecttoperformasystemreset.
Firmware Upgrade Section12. Firmware Upgrade Port:• TheFirmwareUpgradeCablethattransfersthefirmwareupgradedatafromtheAdministrator’scomputertotheConsoleKVMSwitchplugsinhere.
Firmware Upgrade Switch:• DuringnormaloperationthisswitchshouldbeintheNORMALposition.(Seepage18forfirmwareupgradingdetails.)
Slide Release 13. Inordertobringtheconsoleout,youmustfirstreleaseitbyslidingthesetabstotheinside.Seepage9fordetailsonslidingtheconsoleinandout.
external Mouse Port 14. AnadditionalUSBportisprovidedonthefrontpanelofthekeyboardmoduleforanoptionalexternalmouse.
USB Peripheral Port 15. AUSB1.1portisprovidedforthesharingofUSBperipheralsamongconnectedcomputers(e.g.flashdrive,CD-ROMdrive,etc).
3. Introduction
3.1 Front View of Console KVM Switch
4
13
15
1112
10
9
1
2
3
4
5
814
7
6
Port Push-Buttons/LeDs1. Thereare16portselectionpush-buttonsonthefrontpanel,allofwhichcontainanLED.
Pressthepush-buttonofanyporttoswitchtheKVM’sfocustothat•port.
AnorangeLEDilluminateswhenacomputerisconnectedtothe•portandpowered-on.
AgreenLEDilluminateswhenthecomputerconnectedtotheport•hastheKVM’sfocus
Pressingpush-buttons1and2simultaneouslywillperforma•keyboardandmousereset.
Pressingpush-buttons15and16simultaneouslywillstartanAuto•Scan(seepage12forAutoScandetails).
Reset Switch2. Pressingthisswitchperformsasystemreset.Thisswitchissemi-recessedandmustbepushedwithathinobject,suchastheendofapapercliporaballpointpen. LightsturnontoindicatethattheKVMispoweredupandreadytooperate.
Station ID LeD 3. TheB022-U16’sStationIDisdisplayedhere.IfthisisaSingleStationInstallation(seepage8),orthefirststationonadaisy-chainedinstallation(seepage8),theunithasaStationIDof01.Onadaisy-chainedinstallation,theKVMauto-sensesitspositionanddisplaystheStationIDthatcorrespondstoitsplaceinthechain(seePort ID Numbering,page11fordetails).
USB Peripheral Port 4. AUSB1.1portisprovidedforthesharingofUSBperipheralsamongconnectedcomputers(e.g.flashdrive,CD-ROMdrive,etc).
Firmware Upgrade Recovery Switch 5. Duringnormaloperationandwhileperformingafirmwareupgrade,thisswitchshouldbeintheNORMALposition.Intheeventofafirmwareupgradefailure,thisswitchissettoRECOVERtoperformafirmwareupgraderecovery(seepage20forfirmwareupgraderecoverydetails).
Firmware Upgrade Port 6. ThecableusedtoperformafirmwareupgradeconnectstotheKVMswitch here.
Power LeD 7. ThisLEDilluminateswhentheKVMswitchispoweredON.
3. Introduction
3.3 Front View of B022-U16
3.2 Rear View of Console KVM Switch
Daisy-Chain Port 1. Whendaisychainingunits,thecableplugsinhere.
CPU Port Section 2. Thecablesthatlinktothecomputerspluginhere.
Power Socket 3. Thisisastandard3-prongACpowersocket.ThepowercordfromanACsourceplugsinhere.
Power Switch 4. ThisisastandardrockerswitchthatpowerstheunitONandOFF.
external Console Port 5. Thisportallowsfortheoptionalconnectionofanexternalkeyboard,mouseandmonitor.TheincludedUSB/PS2ComboConsoleCableKitconnectstotheKVMswitchhere.EitherUSBorPS/2keyboards/micecanbeconnected.
grounding Terminal 6. TheincludedgroundingwireconnectstotheKVMswitchhere.
5
1 2
34
1
5 236 4
65 7
3.4 Rear View of B022-U16
4.1 Pre-Installation Safety Instructions
Daisy-Chain Port1. Daisy-Chain In Port• –Whendaisy-chainingadditionalKVMswitches,thedaisy-chaincablefromthepreviousKVMswitchinthechainconnectshere.ThisportisnotusediftheKVMswitchoccupiesthefirstspotinadaisy-chain,orinasingle-stageinstallation.
Daisy-Chain Out Port• –Whendaisy-chainingadditionalKVMswitches,thedaisy-chaincableconnectsthisporttotheDaisy-ChainInPortonthenextKVMswitchinthechain.
CPU Port Section 2. PlugtheKVMcableforeachcomputerintotheseports.
Cable Management Slot 3. Acabletiecanbeusedtogatherthecablestogetherandthenbetiedtothisslottohelpmanagethecables.
Power Port 4. Thepoweradaptercableplugsintothisport.
Console Port 5. TheincludedUSB/PS2ComboConsoleCableKitconnectstotheKVMswitchhere.AVGAmonitorandeitherUSBorPS/2keyboards/micecanbeconnectedtothecablekit.
grounding Terminal 6. TheincludedgroundingwireconnectstotheKVMswitchhere.
3. Introduction
4. Installation
Readalloftheseinstructionsandsavethemforfuturereference.
general Safety Instructions
• Followallwarningsandinstructionsmarkedonthedevice.
• Donotplacethedeviceonanyunstablesurface(cart,stand,table,etc.).Ifthedevicefalls,seriousdamagewillresult.
• Donotusethedevicenearwater.
• Donotplacethedevicenear,orover,radiatorsorheatregisters.
• Thedevicecabinetisprovidedwithslotsandopeningstoallowforadequateventilation.Toensurereliableoperation,andtoprotectagainstoverheating,theseopeningsmustneverbeblockedorcovered.
• Thedeviceshouldneverbeplacedonasoftsurface(bed,sofa,rug,etc.)asthiswillblockitsventilationopenings.Likewise,thedeviceshouldnotbeplacedinabuiltinenclosureunlessadequateventilationhasbeenprovided.
• Neverspillliquidofanykindonthedevice.
• Unplugthedevicefromthewalloutletbeforecleaning.Donotuseliquidoraerosolcleaners.Useadampclothforcleaning.
• Thedeviceshouldbeoperatedfromthetypeofpowersourceindicatedonthemarkinglabel.Ifyouarenotsureofthetypeofpoweravailable,consultyourdealerorlocalpowercompany.
• ThedeviceisdesignedforITpowerdistributionsystemswithupto230Vphase-to-phasevoltage.
• Topreventdamagetoyourinstallationitisimportantthatalldevicesareproperlygrounded.
• Thedeviceisequippedwitha3-wiregroundingtypeplug.Thisisasafetyfeature.Ifyouareunabletoinserttheplugintotheoutlet,contactanelectrician.Donotattempttodefeatthepurposeofthegrounding-typeplug.Alwaysfollowyourlocal/nationalwiringcodes.
• Donotallowanythingtorestonthepowercordorcables.Routethepowercordandcablessothattheycannotbesteppedonortrippedover.
• Ifanextensioncordisusedwiththisdevicemakesurethatthetotaloftheampereratingsofallproductsusedonthiscorddoesnotexceedtheextensioncordampererating.Makesurethatthetotalofallproductspluggedintothewalloutletdoesnotexceed15amperes.
• Toprotectagainstcircuitoverloading,youshouldplugyourKVMswitchandconnectedcomputersintoaTrippLiteSmartPro®orSmartOnline™UPSSystem.
• Positionsystemcablesandpowercablescarefully,makingsurethatnothingrestsonanycables.
• Neverpushobjectsofanykindintoorthroughcabinetslots.Theymaytouchdangerousvoltagepointsorshortoutpartsresultinginariskoffireorelectrical shock.
• Donotattempttoservicethedeviceyourself.Referallservicingtoqualifiedservicepersonnel.
6
1
4 56 3
2
• Ifthefollowingconditionsoccur,unplugthedevicefromthewalloutletandbringittoqualifiedservicepersonnelforrepair:
• Thepowercordorplughasbecomedamagedorfrayed.
• Liquidhasbeenspilledintothedevice.
• Thedevicehasbeenexposedtorainorwater.
• Thedevicehasbeendropped,orthecabinethasbeendamaged.
• Thedeviceexhibitsadistinctchangeinperformance,indicatinganeedforservice.
• Thedevicedoesnotoperatenormallywhentheoperatinginstructionsarefollowed.
• Onlyadjustthosecontrolsthatarecoveredintheoperatinginstructions.Improperadjustmentofothercontrolsmayresultindamagethatwillrequireextensiveworkbyaqualifiedtechniciantorepair.
• DonotconnecttheRJ-11connectormarked“UPGRADE”toapublictelecommunicationnetwork.
• Useofthisequipmentinlifesupportapplicationswherefailureofthisequipmentcanreasonablybeexpectedtocausethefailureofthelifesupportequipmentortosignificantlyaffectitssafetyoreffectivenessisnotrecommended.Donotusethisequipmentinthepresenceofaflammableanestheticmixturewithair,oxygenornitrousoxide.
Rack Mounting Safety Instructions
• Beforeworkingontherack,makesurethatthestabilizersaresecuredtotherack,extendedtothefloor,andthatthefullweightoftherackrestsonthefloor.Installfrontandsidestabilizersonasinglerackorfrontstabilizersforjoinedmultipleracksbeforeworkingontherack.
• Alwaysloadtherackfromthebottomup,andloadtheheaviestitemintherackfirst.
• Makesurethattherackislevelandstablebeforeextendingadevicefromtherack.
• Usecautionwhenpressingthedevicerailreleaselatchesandslidingadeviceintooroutofarack;thesliderailscanpinchyourfingers.
• Afteradeviceisinsertedintotherack,carefullyextendtherailintoalockingposition,andthenslidethedeviceintotherack.
• DonotoverloadtheACsupplybranchcircuitthatprovidespowertotherack.
• Thetotalrackloadshouldnotexceed80percentofthebranchcircuitrating.
• Makesurethatallequipmentusedontherack(includingpowerstripsandotherelectricalconnectors)isproperlygrounded.
• Ensurethatproperairflowisprovidedtodevicesintherack.
• Ensurethattheoperatingambienttemperatureoftherackenvironmentdoesnotexceedthemaximumambienttemperaturespecifiedfortheequipmentbythemanufacturer.
• Donotsteponorstandonanydevicewhenservicingotherdevicesinarack
4.1 Pre-Installation Safety Instructions (continued)
4. Installation
TheNetDirectorConsoleKVMSwitchisdesignedformountingina1Uracksystem.Forconvenience,arackmountingkitisincludedwithyourKVMforquickinstallation.Thevariousmountingoptionsareexplainedinthesectionsthatfollow:
Note:1. It is recommended that the unit be installed by two people; one to hold it in place and the other to attach it to the rack.
2. The rackmounting kit that comes with the unit does not include screws or cage nuts. Contact your rack dealer for this hardware.
3. Allow at least 5.1 cm on each side for proper ventilation, and at least 12.7 cm at the rear of the unit for the power cord and cable kits.
Standard Rackmounting
1 Slideouttherearmountingbracketsfromtheconsoleandmountbothbrackets(separatefromtheconsole)totheinsiderearofastandard1Uracksystemusinguser-suppliedscrews.
2 Taketheconsoleandgentlyslideitintothetworear-mountedbracketsintherackandsecuretheconsoleinplacebyinsertinguser-suppliedscrews.
2-Post Rackmounting
TheNetDirectorConsoleKVMSwitchcanalsobemountedina2-postrackinstallationusingtheoptional2-PostRackmountKit(model:B019-000).Themountinghardwareallowsfortheconsoletobeopenedwiththedrawerinanyposition.Heavy-duty14-gaugesteelprovidesstabilityandpreventstheconsoleframefromtwisting.SeetheB019-000instructionalmanualfordetailedmountinginstructions.
4.2 Rackmounting Instructions for Console KVMs
7
1 2
Fastentherackmountbracketstotherackusinguser-suppliedscrewstoinstallinarack.
Topreventdamagetoyourinstallationitisimportantthatalldevicesareproperlygrounded.UsetheincludedgroundingwiretogroundtheKVMswitchbyconnectingoneendofthewiretothegroundingterminalontheunit,andtheotherendofthewiretoasuitablygroundedobject.
EnsurethatpowertoallthedevicestobeconnectedhasbeenturnedOFF.1.
ConnecttheincludedUSB/PS2ComboConsoleCableKittotheconsoleconnectoronthe2. backoftheunit,andthenconnectamonitor,mouseandkeyboardtotheappropriateconnectorsonthecablekit.ThedistancebetweentheexternalconsoleandtheKVMswitchmustnotexceed66ft(20m).Note:ThisstepismandatoryforB022-U16KVMswitches,butisoptionalforConsoleKVMSwitches.
UseaP778-SeriesUSB/PS2ComboKVMCableKittoconnecteachCPUporttoa3.computer/server.ThedistancebetweentheKVMswitchandeachconnectedcomputermustnotexceed33ft(10m).
PlugthepowercordorpoweradaptercableintotheKVM’spowerjack,thenplugintoa4.UPS,surgeorotherACpowersource.TurnonthepowerswitchfortheconsoleKVM.(NotrequiredfortheB022-U16.)
Turnonthepowertothecomputers.5.
Tocontrolevenmorecomputers,upto31B022-016orB022-U16KVMSwitchescanbedaisy-chaineddownfromthefirststation.Note: As many as 512 computers can be controlled from the unit’s integrated console in a complete installation.
To set up a daisy-chained installation:
EnsurethatpowertoallthedevicestobeconnectedhasbeenturnedOFF.1.
Useadaisy-chaincable(describedinthe2. Cables section, page3)toconnecttheChain Out portoftheparentunittotheChain In portofthechildunit.ThedistancebetweenanytwoKVMswitchesinadaisy-chainmustnotexceed49ft(15m).ThedistancebetweenthefirstKVMswitchandthelastKVMswitchinadaisy-chainmustnotexceed328ft(100m),regardlessofthenumberofKVMswitchesintheentirechain.
UseaKVMcablekit(describedinthe3. Cables section, page3)toconnectthekeyboard,videoandmouseportsofacomputertoanyavailableportontheKVMswitch.ThedistancebetweentheKVMswitchandeachconnectedcomputermustnotexceed33ft(10m).
RepeattheabovestepsforanyadditionalKVMswitchesyouwishtoaddtothechain.4.
Poweruptheinstallationaccordingtothefollowingprocedure:5.
Pluginthepoweradapterforthefirststation.Waitafewsecondstoallowtheunittoa. determineitsStationID.
Pluginthepoweradaptersforeachsubsequentstationintheinstallationinturn(ie.b.secondstation,thenthirdstation,etc.).EachKVMswitchhasanLEDdisplayonitsfrontpaneltoindicateitsStationID(theStationIDforthefirststationis01,theIDfor the second station is 02,theIDforthethirdstationis03,etc.).
Ineachcase,waitfortheStationIDtobedisplayedontheStationIDLEDbeforeplugginginthenextstation.
4.3 Rackmounting for B022-U16
4.4 grounding
4.5 Single-Station Installation
4.6 Multiple Station (Daisy-Chained) Installation
4. Installation
8
Insert screws to connect to rack
2
3
1
5
4
AllKVMswitchessupporthotplugging—componentscanberemovedandaddedbackintotheinstallationbyunpluggingtheircablesfromtheportswithouthavingtoshuttheswitchdown.However,inorderforhotpluggingtoworkproperly,theseproceduresmustbefollowed:
Switching Station PositionsSwitchstationpositionsbysimplyunpluggingthedaisy-chaincablefromtheoldparentandpluggingintoanewone.Afteryoudo,inorderfortheOSDmenustocorrespondtothechange,youmustresettheStationIDsviatheOSD.Seepage17fordetails.
Hot Plugging CPU PortsSwitchCPUportsbyunpluggingtheKVMcablekitandrepluggingintothedesiredport.InorderfortheOSDmenustocorrespondtothechangemade,youmustmanuallyreconfiguretheOSDinformationforthenewport.SeetheF3 SET (page15)andF4 ADM (page16),functionsfordetails.Note: If the computer’s Operating System does not support hot plugging, this function may not work properly.
Hot Plugging Console PortsKeyboard,monitor,andmousecanallbehotplugged.Whenhotpluggingthemouse:
1.Youmayunplugthemouseandplugitbackinagain(toresetthemouse,forexample),aslongasyouusethesame mouse.
2.Ifyoupluginadifferentmouse,allthestationsandallthecomputersontheinstallationmustbeshutdownfor10seconds,thenrestartedusingthePowerUpSequencedescribedonpage8.
Theconsoleislocatedunderthetopcover.Toaccesstheconsole,slidetheconsolemoduleoutandraisethecover.Note: As a safety precaution, to keep the console from accidentally sliding out, the console is locked into the in position. Before you can pull the console module out, you must release it by pushing the catches on the unit’s front panel toward the center of the switch.
4.8 Hot Plugging
5.1 opening the NetDirector Console KVM
5.2 Closing the NetDirector Console KVM
4. Installation
5. Basic operation
Toslidetheconsolemodulebackin,closethecoveranddothefollowing:
Pullthesafetycatchesontheunit’ssiderailstowardyouandpushthe1. moduleinuntilitstops.
Releasethecatches;pullthemoduleslightlytowardyou;thenpushit2. all the way in.
Note: The reason for the two-step procedure is to minimize the chances of pinching your fingers when sliding the module in.
TheB022-U16KVMSwitchcanbecascadedoffofaB020-008-17-IPorB020-016-17-IPConsoleKVMSwitchtoexpandthenumberofconnectedcomputers.Beforeyoucanstartacascadedinstallation,youmustupgradetheB022-U16firmwaretobecascadecompatible.(SeeFirmwareUpgradeonpage18fordetails.)Forcascadedinstallationdetails,seetheowner’smanualoftheB020-008-17-IPorB020-016-17-IPConsoleKVMSwitch.
4.7 Multiple Station (Cascaded) Installation
9
5.3 LCD oSD (on-Screen Display) Configuration
5.4 Sharing USB Peripheral Devices
5.5 Powering off and Restarting
5. Basic operation
The LCD oSD allows you to set up and configure the LCD display:
ToopenuptheLCDOSDmainmenu,pressthebuttonmarked• Menu.
Usethe• | and | buttonstonavigateandmakeadjustments.Afternavigatingtoasettingchoice,usetheMenu buttontobringuptheadjustmentscreen.
Whenmakingadjustments,• | increasesthevalue; | decreasesthevalue.
Whensatisfied,press• Exit toreturntotheOSDmainmenu.
Whenalladjustmentshavebeenmade,press• Exit toclosetheLCDOSD.
Thefollowingisanexplanationofthesettings:
Brightness Adjuststhebackgroundblacklevelofthescreenimage.
Contrast Adjuststheforegroundwhitelevelofthescreenimage.
Phase Adjuststheverticalsizeofthescreenimage.
Clock Adjuststhehorizontalsizeofthescreenimage.
H-Position PositionsthedisplayareaontheLCDpanelhorizontally(movesthedisplayarealeftorright).
V-Position PositionsthedisplayareaontheLCDpanelvertically(movesthedisplayareaupordown).
Color Temperature Adjuststhecolorqualityofthedisplaybetweenthreepre-configuredsettings;6500k,7500k,9300k.ThismenualsoallowsyoutocustomizetheindividualRGBsettingstoyourpreference.
Language SelectsthelanguagethattheOSDdisplaysitsmenusin.
OSD Duration AdjustthelengthofinactivitybeforetheOSDdisplayturnsoff(between5and100minutes).Thedefaultis5minutes.
Reset ResetsalloftheadjustmentsintheLCDOSDmenustotheirfactorydefaultsettings.
Note: Pressing the Exit button while not in the LCD OSD Menu will perform an auto-configuration on the monitor.
TheUSB1.1portontheConsoleKVMSwitch’sLCDpanelandtheB022-U16frontpanelcanbeusedtoshareUSBperipheralsbetweenconnectedcom-puters.SimplyconnectaUSBperipheraldevicetothisport,andanyconnectedcomputeryouswitchtowillhaveaccesstothedevice.Note: The following limitations apply to the USB peripheral port:
1. This port serves as a 1 port USB 1.1 hub; USB 2.0 devices will not function as designed.
2. USB peripherals can only be shared among computers that are connected to the KVM switch via the USB connectors on the P778-Series USB/PS2 Combo KVM Cable Kit.
3. USB peripherals can only be shared among computers that are connected to the KVM switch that the USB peripheral is plugged into. Computers that are connected to daisy-chained KVM switches will not have access to the USB peripheral device.
IfitbecomesnecessarytopowerOFFtheKVMswitch,followtheprocedurebelow:
ShutdownallcomputersconnectedtotheKVMswitch.IfyouarepoweringOFFadaisy-chaininstallation,shutdownallcomputersconnectedto1. eachKVMswitchintheinstallation.Note: It is necessary to unplug any computers that have the Keyboard Power ON function. If left on, the KVM switch will continue to receive power via these computers.
TurnOFFtheKVMswitch(ConsoleKVMonly)andunplugtheKVMswitchfromitspowersource.PowerOFFandunplugeachKVMswitchin2. thedaisy-chainsuccession.
Wait10secondsandthenplugtheKVMswitch,startingwiththefirststation,backintoitspowersource.TurnONthepowertotheKVMswitch3.(ConsoleKVMonly).
OncethefirststationKVMswitchhasascertaineditspositioninthedaisy-chain,powerONandpluginthenextKVMswitchintheinstallation.4.FollowthisprocedureforeachKVMswitchintheinstallation.
OnceallKVMswitchesintheinstallationhavebeenpoweredbackON,turnonthepowertoallconnectedcomputers.5.
10
Exit | | Menu m m m m
6. HotkeysNetDirectorKVMSwitchescanbeeasilyoperatedusinghotkeycommands.Thischapterdiscussestheavailablehotkeysandtheirfunctions.Belowisalistofthevarioushotkeys,brokenupintohotkeysforportcontrolandhotkeysthatperformotherfunctions.
Port Control Hotkeys
• Selectingtheactiveport
• AutoScanModeportswitching
• SkipModeportswitching
other Hotkeys
• Computerkeyboardandmousereset
• SettingtheBeeper
• SettingtheQuickHotkey
• SettingtheOSDHotkey
• SettingthePortOperatingSystem
• RestoringtheOSDdefaultvalues
6.1 Invoking the Hotkey Mode
6.2 Port ID Numbering
6.3 Selecting the Active Port
AllhotkeyoperationsbeginbyinvokingHotkeyMode.InorderforHotkeyModetowork,itmustbeactivatedintheKVM’sOSD;itisactivatedbydefault.(Seepage16fordetailsonOSDhotkeyactivation.)TherearetwosequencesthatcanbeusedtoinvokeHotkeyMode,bothofwhichareexplainedbelow.YoucantogglebetweenthesetwosequencesusingtheOSD.(Seepage15fordetailsonswitchingtheHotkeyModeinvocationsequence.)The[Num Lock] and [-]Minuskeysarethedefaultinvocationkeys.
Num Lock and Minus (-) keys
Pressandholddownthe1. [Num Lock] key.
Whilethe2. [Num Lock]keyishelddown,pressandreleasethe [-]Minuskey.
After releasing the 3. [-]Minuskey,releasethe[Num Lock] key.
Control and F12 keys
1.Pressandholddownthe[Ctrl] key.
2.Whilethe[Ctrl]keyishelddown,pressandreleasethe[F12] key.
3.Afterreleasingthe [F12]key,releasethe[Ctrl] key.
When Hotkey Mode has been invoked:
• Themonitorgoesblankandthehotkeycommandlineisdisplayed.Thisiswhereyouwillenterinthehotkeycommandsdescribedinthischapter.
• The[Caps Lock] and [Scroll Lock]iconswillblinkinsuccession.
• OrdinarykeystrokeswillbesuspendeduntilHotkeyModeisexited.HotkeyModeisexitedbyperformingahotkeycommandorbypressingthe[Esc] or [Spacebar] keys.
EachCPUportinaninstallationisassignedauniquePortID.ThePortIDismadeupoftwoparts:aStation Number,andaPort Number:
The • Station Number isatwo-digitnumberthatidentifiestheswitch’spositioninthedaisy-chainsequence.ThiscorrespondstothenumberdisplayedonthefrontpanelStationIDLED.
The • Port Number isatwo-digitnumberwhichidentifiestheportnumberthatthecomputerisconnectedto.
TheStationNumberprecedesthePortNumber.•
StationandPortNumbersarealways2digits,so1-9becomes01-09.Eg.,acomputerattachedto• Port 7 of Station 15 hasaPortIDof15-07.
Youcandirectlyaccessaportbydoingthefollowing:
InvokeHotkeyMode.1)
2) EnterthePortID. ThePortIDnumbersappearonthecommandlineastheyareentered.Tocorrectamistake,use[Backspace]toerasethewrongnumber.
3) Press[Enter]. Once[Enter]hasbeenpressed,theKVMswitchestothedesignatedcomputerandyouautomaticallyexittheHotkeyMode.
11
6. Hotkeys
6.4 Auto Scanning
6.5 Starting Auto Scan
6.6 Pausing in Auto Scan
6.7 Skip Mode
6.8 Hotkey Beeper Control
6.9 Computer Keyboard/Mouse Reset
AutoScanallowstheconnectedcomputerstobemonitoredautomatically,withouthavingtomanuallytogglebetweenports.WheninAutoScanMode,theKVMswitchswitchesthrougheachaccessibleportatfixedintervals.Onlyportsthatthecurrentlylogged-inUserhasbeengiveaccesstowillbescanned.Thedefaultintervalis5seconds.(Seepage15fordetailsonchangingthescaninterval.)
TostartAutoScanning:
InvokeHotkeyMode.1)
Keyin2) [A] and hit Enter.YouautomaticallyexitHotkeyModeandenterAutoScanMode.
Anautoscancanbepausedatanytime(seebelow).3)
ToexitAutoScanMode,press4) [Esc] or [Spacebar].Note: While Auto Scan Mode is in effect, ordinary keyboard and mouse functions are suspended - only Auto Scan Mode compliant keystrokes and mouse clicks can be input. You must exit Auto Scan Mode in order to regain normal control of the console.
WhileinAutoScanMode,thescancanbepausedinordertokeepthefocusonaparticularcomputereitherbypressingP or with a left click of the mouse.DuringthetimethatAutoScanningispaused,thecommandlinedisplays:Auto Scan: Paused.
InmanycasesPausing is more convenient than ExitingtheAutoScanModebecausewhenyouResume scanning while in Pause,youstartfromwhereyouleftoff.IfyouExitedandrestarted,scanningwouldstartfromtheveryfirstcomputerontheinstallation.
ToresumeAutoScanning,pressanykeyorleftclick.Scanningcontinuesfromwhereitleftoff.
Thisfeatureallowsyoutomanuallysequencebetweencomputersinordertomonitorthem.ThismanualversionoftheAutoScanModeletsyoudwellonaparticularportforaslongasyoulike.ToinvokePrevious/NextSwitching:
InvokeHotkeyMode.1)
Keyin[2) Arrow]referstoanyofthearrowkeysonthekeyboard.Afteryoupress[Arrow],youautomaticallyexitHotkeyMode,andenterSkipModewhereyoucanswitchportsasfollows:
Skipsfromthecurrentporttothefirstaccessibleportprevioustoit.
Skipsfromthecurrentporttothenextaccessibleport.
Skipsfromthecurrentporttothelastaccessibleportofthepreviousstation.
Skipsfromthecurrentporttothefirstaccessibleportofthenextstation.
ToexitSkipMode,press3) [Esc].Note: 1. Once Skip Mode has been invoked, until you exit, you can keep on skipping simply by pressing an Arrow key.
2. While Skip Mode is in effect, ordinary keyboard and mouse functions are suspended—only Skip Mode compliant keystrokes can be input. You must exit Skip Mode in order to regain normal control of the console.
TheBeepercanbeturnedON/OFFviaHotkeyortheOSD(seepages14-18forOSDdetails).TotoggletheBeeper,keyinthefollowinghotkeycombination:
InvokeHotkeyModewiththe1) [Num Lock] + [-] combination.
Keyin2) [B].
Afteryoupress[B],theBeepertogglesONorOFF.ThecommandlinedisplaysBeeper On or Beeper Off foronesecond;thenthemessagedisappearsandyouautomaticallyexitHotkeyMode.
Ifthekeyboardormouseceasestofunctionforaparticularport,youcanperformakeyboard/mouseresetviathehotkeycommandbelow.Thisperformsthesamefunctionasunplugging/repluggingthekeyboardandmouseontheconnectedcomputer.Toperformakeyboard/mousereset,dothefollowing:
1.InvokeHotkeyMode.
2.Pressthe [F5] key.
After pressing the [F5]key,youexitHotkeyModeandtheKVMswitchperformsakeyboard/mouseresetforthecurrentlyselectedcomputer.(Thismaytakeafewsecondstotakeaffect.)Ifyoufailtoregainkeyboard/mousecontrol,performasystemreset.(Seepage10fordetailsonperformingasystemreset.)
12
6. Hotkeys
6.10 Quick Hotkey Control
6.11 oSD Hotkey Control
6.12 Port oS Control
6.13 Restore Default Values
6.14 Hotkey Summary Table
ThehotkeysequencetoinvokeHotkeyModecanbetoggledviahotkeycommandaswellasOSD.(Seepage15forchangingtheHotkeyModeinvocationsequenceviaOSD.)Totoggletheinvocationsequencebetween[Num Lock, Minus]and[Ctrl, F12],dothefollowing:
1.InvokeHotkeyMode.
2.Pressthe[H] key.
After pressing the [H]key,theHotkeyModeinvocationsequenceischangedandthetextHOTKEYHASBEENCHANGEDbrieflyappearsonthemoni-tor.HotkeyModeisthenexitedandyouregainnormaloperationoftheKVMswitch.
ThehotkeysequencetoinvoketheOSDcanbetoggledviahotkeycommandaswellasOSD.(Seepage14forchangingtheOSDinvocationsequenceviaOSD.)Totoggletheinvocationsequencebetween[Scroll Lock, Scroll Lock]and[Ctrl, Ctrl],dothefollowing:
1.InvokeHotkeyMode.
2.Pressthe[T] key.
After pressing the [T]key,theOSDinvocationsequenceischangedandthetextHOTKEYHASBEENCHANGEDbrieflyappearsonthemonitor.Hot-keyModeisthenexitedandyouregainnormaloperationoftheKVMswitch.
InadditiontochoosingtheOperatingSystemforaconnectedportviatheOSD(seepage17fordetails),theAdministratorcansettheOperatingSystemviahotkeycommand.TochangeaportsOperatingSystemviahotkey,dothefollowing:
1.InvokeHotkeyMode.
2.Keyin[Function],where[Function]representsoneofthefollowing:
a. [F1]–SetstheOperatingSystemtoWindows.
b.[F2] –SetstheOperatingSystemtoMac.
c. [F3]–SetstheOperatingSystemtoSun.
Afterpressingoneofthesekeys,theOperatingSystemwillbechangedfortheselectedportandyouwillexitHotkeyMode.
ThisAdministrator-ONLYhotkeyrestorestheKVMswitchtoitsdefaultvalues.(Seepage17fordetailsonrestoringtheKVMdefaultvaluesviaOSD.)Torestorethedefaultvaluesviahotkey,dothefollowing:
1.InvokeHotkeyMode.
2.Pressthe [R] key.
3.Hitthe[Enter] key.
After hitting the [Enter]key,thetextRESETTODEFAULTSETTINGisbrieflydisplayed,andthenHotkeyModeisexited.
Note: All of the hotkey commands in this table require Hotkey Mode to be invoked to function. (See page 11 for details on invoking Hotkey Mode.)
Hotkey Command Function
[Station, ID], [Port ID], [Enter]SwitchesthefocusoftheKVMtothecomputerconnectedtothePortIDentered(seepage11fordetailsonPortIDnumbering).
[A], [Enter] or [Q], [Enter]StartsAutoScanMode.WhenAutoScanModeisineffect,hittingthe[P]keyorleft-clickingpausesthescan.Pressinganykeyresumesthescan.
[B] TurnstheBeepersoundON/OFF.[Esc] or [Spacebar] ExitsHotkeyMode.[F1] SetstheOperatingSystemoftheselectedporttoWindows(Administrator-only).[F2] SetstheOperatingSystemoftheselectedporttoMac(Administrator-only).[F3] SetstheOperatingSystemoftheselectedporttoSun(Administrator-only).[F5] Performsakeyboard/mouseresetforthecomputerconnectedtotheselectedport.[H] Togglesbetweenthe[Num Lock, Minus]and[Ctrl, F12]HotkeyModeinvocationsequences.[R], [Enter] RestorestheKVMswitchesdefaultvalues(Administrator-only).[T] Togglesbetweenthe[Scroll Lock, Scroll Lock]and[Ctrl, Ctrl]OSDinvocationsequences.[] InvokesSkipModeandskipsfromthecurrentporttothepreviousaccessibleport.[] InvokesSkipModeandskipsfromthecurrentporttothenextaccessibleport.[] InvokesSkipModeandskipstothelastaccessibleportonthepreviousstation.[] InvokesSkipModeandskipstothefirstaccessibleportonthenextstation.
13
ToclosethemenuanddeactivateOSD,clickthe• [X] attheupperrightcorneroftheOSDWindow;orpress[Esc].
Tologout,press• [F8],orclickF8,ontheOSDMenuBarorclickthezZzsymbolattheupperrighthandcorneroftheOSDScreen.
Tomoveupordownonelineatatime,clicktheUpandDownTrianglesymbols(• )orusetheUpandDownArrowKeys.Iftherearemoreentriesthanappearonthescreen,thescreenwillscroll.
Tomoveupordownonescreenatatime,clicktheUpandDownArrowsymbols(• ),orusethe[Pg Up] and [Pg Dn]keys.Iftherearemoreentriesthanappearonthescreen,thescreenwillscroll.
Toactivateaport,double-clickit,ormovetheHighlightBartoitthenpress• [Enter].
Afterexecutinganyaction,youautomaticallygobacktothemenuonelevelabove.•
WhenyouinvoketheOSD,ascreensimilartotheoneaboveappears:Note: 1. The diagram depicts the Administrator’s Main Screen. The User Main Screen does
not have the F4 and F6 functions, since they can’t be accessed by ordinary Users and are reserved for the Administrator.
2. OSD always starts in List view, with the highlight bar at the same position it was when it was last closed.
3. Only the ports that have been set accessible by the Administrator for the currently logged in User are visible (see SET ACCESSIBLE PORTS, page 16, for details).
4. If the port list is collapsed into stations, simply click on the plus sign next to the desired station number, or highlight the desired station number and hit the [Enter] key.
7. oSD (on-Screen Display) operation
7.1 oSD overview
7.2 Logging In For The First Time
7.3 oSD Invocation Sequence
7.4 oSD Navigation
7.5 oSD Main Screen Headings
TheOn-ScreenDisplay(OSD)isatext-basedinterfacethatallowsforcontrolandadministrationoftheKVMswitch.WhenloggingontotheKVMswitch,theOSDMainMenuisthefirstscreenyouwillseeafterenteringyourusernameandpassword.
TheKVMswitchfeaturesatwo-levelsecurity,withoneAdministratorandfourUseraccounts.IfyouareanAdministratoraccessingtheKVMswitchforthefirsttime,leavetheusernameandpasswordfieldblankandhitthe[Enter]keytwicetoaccesstheOSDMainMenu.OnceloggedintotheKVMswitchasAdministrator,youwillbeabletoaccessallOSDfeaturesandcustomizeKVMsettings.Atthispoint,itishighlyrecommendedthatyouchangetheAdministratorusernameandpassword.
OnceloggedintotheKVMswitch,youwillneedtouseoneoftwosequencestoopentheOSDMainMenu;[Scroll Lock, Scroll Lock]or[Ctrl, Ctrl]. ThedefaultOSDinvocationsequenceis[Scroll Lock, Scroll Lock].Note: When using the [Scroll Lock, Scroll Lock] OSD invocation sequence, you must hold down the [Fn] key, as the [Scroll Lock] key is part of the [Num Lock] key.
Heading explanation
SN ThestationnumberofeachKVMintheinstallationwillbedisplayedinthiscolumn.ThestationnumberofeachKVMswitchwillbedisplayedasanexpandablefolder,whichcanbeexpandedtoshowalloftheKVMportsinthestation,orcollapsedtohidethem.
PN TheportnumbersofeachKVMintheinstallationaredisplayedinthiscolumn.Iftheindividualstationsarecollapsed,theirportnumberswillnotbedisplayed.
QV AnarrowinthiscolumnindicatesthatthecorrespondingportisselectedforQuickViewscanning(seeSet Quick View Ports,page17).
ASunsymbolinthiscolumnindicatesthatthecorrespondingcomputerisbothpoweredONandOnLine.
NAME Ifaporthasbeengivenaname(see Edit Port Names,page16),itsnameappearsinthiscolumn.
14
F1:GOTO F3:SET F5:SKP F7:SCAN XF2:LIST F4:ADM F6:BRC F8:LOUT zZ
z
ADMINISTRATORLIST:ALLSN.PN QV X NAME
02 • 14 ABC COMP102 • 15 X ABC COMP202 • 16 X ABC COMP303 • 01 WEB SERVER 103 • 02 WEB SERVER 203 • 03 X FAX SERVER 103 • 04 X FAX SERVER 203 • 05 X MAIL SERVER 1
7. oSD (on-Screen Display) operation
7.6 oSD Functions
OSDfunctionsallowtheKVMtobecontrolledandconfiguredviatheOSD.Usingthesefunctionsyoucanquicklyjumptoaportontheinstallation,startanautoscan,limittheportlistthatdisplayswhenyouaccesstheOSD,create/editportnames,etc.ToaccessanyoftheOSDfunctions,simplyclickontheircorrespondingfunctionnumberatthetopoftheOSDorhittheircorrespondingfunctionnumberonthekeyboard.WhenintheOSDfunctionsubmenus,simplyhitthe[Esc]keytoexitandreturntothepreviousmenu.
F1 go To (goTo)Click the F1 field or press [F1] to activatetheGOTOfunction.GOTOallowsyoutoswitchdirectlytoaporteitherbykeyingintheport’sName,oritsPort ID.
TousetheName,enter• [1];keyintheport’sName;thenpress[Enter].
TousethePortID,enter• [2];keyinthePort ID;thenpress[Enter]. Note: A partial Name or Port ID can be entered. The screen will show all the computers that match the Name or Port ID pattern AND that the User is allowed to access. ToreturntotheOSDMainMenuwithoutmakingachoice,press[Esc].
F2 List Ports (LIST)ThisfunctionletsyoutailorthelistofportstheOSDwilldisplayontheMainScreen.Thesubmenuchoicesandtheirmeaningsaregiveninthetablebelow:
Choice Description
ALL Listsalloftheportsontheinstallationthatareaccessibletothelogged-onUser.
POWEREDON Listsalloftheportsontheinstallationthatareaccessibletothelogged-onUserANDpoweredON.
QVIEW ThisisanAdministrator-ONLYoption.Whenselected,itwilldisplayonlytheportsthathavebeenmarkedasQuickViewports.
QVIEW+POWEREDON ThisisanAdministrator-ONLYoption.Whenselected,itwilldisplayonlytheportsthathavebeenmarkedasQuickViewportsANDarepoweredON.
MovetheHighlightBartothedesiredchoiceandpress[Enter].Aniconappearsnexttothechoicetoindicatethatitiscurrentlyselected.
F3 Set environment (SeT)ThisfunctionallowseachUserandtheAdministratortosetuptheirownworkingenvironment.AseparateprofileforeachisstoredbytheOSDandisactivatedaccordingtotheusernamethatwasprovidedduringlogin.
Tochangeasetting:
1)Double-clicktheitem;ormovethehighlightbartoitandpress[Enter].
2)Afteryouselectanitem,asubmenuwithmorechoiceswillappear.Tomakeaselection,eitherdouble-clickachoiceormovetheHighlightBartothe desired place and press [Enter].Aniconwillappearbesidetheselectedchoicetoidentifyit.Thesettingsareexplainedinthefollowingtable:
Setting Function
OSDHOTKEY SelectthehotkeythatactivatestheOSDfunction:useeither[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].Sincethe[Ctrl] keycombinationmayconflictwithprogramsrunningonthecomputers,thedefaultisthe[Scroll Lock]combination.
PORTIDDISPLAYPOSITION
PositionthePortIDidentifieranywhereonthescreen.Thedefaultistheupperrightcorner.UsetheMouseortheArrowKeysplus[Pg Up],[Pg Dn],[Home],[End],and[5](onthenumerickeypadwith[Num Lock]off),topositionthePortIDdisplay,thendouble-clickorpress[Enter]tolockthepositionandreturntothesetsubmenu.
Note: The position for the ID identifier is set independently for each port on the installation; the choice specified here only applies to the port that is currently active.
PORTIDDISPLAY DURATION
ThisselectiongivesyoutheoptionofdisplayingthePortIDfor3seconds,orhavingthePortIDalwaysoff.Thedefaultistodisplayfor3seconds.
PORTIDDISPLAY MODE
SelecthowthePortIDisdisplayed:thePortNumberalone(PORT NUMBER);thePort Namealone(PORT NAME);orthePortNumberplusthePortName(PORT NUMBER + PORT NAME).Thedefaultis(PORT NUMBER + PORT NAME).
SCANDURATION DeterminehowlongeachportisconnectedastheKVMcyclesthroughtheportsinAutoScanMode(seeF7SCANpage18).Keyinavaluefrom1-255seconds,thenpress[Enter].Thedefaultis5seconds;asettingof0(zero)disablestheAutoScanFunction.
15
Setting Function
SCAN/SKIPMODE SelectwhichportswillbeaccessedduringAutoScanandSkipModes.Choicesare:
• ALL–AllaccessibleportsintheinstallationwillbeaccessibleinAutoScanandSkipModes.• POWERED ON –AllportsthatareaccessibleANDpoweredonwillbeaccessibleinAutoScanandSkipModes.• QUICK VIEW–ThisisanAdministrator-ONLYoption.Whenselected,onlyportsthataresetasQuickViewportswillbeaccessibleinAutoScanandSkipMode.
• QUICK VIEW + POWERED ON–ThisisanAdministrator-ONLYoption.Whenselected,onlyportsthataresetasQuickViewportsANDpoweredonwillbeaccessibleinAutoScanandSkipMode.
ThedefaultsettingisALL.
SCREENBLANKER Iftheconsoleisleftidlefortheamountoftimesetwiththisfunction,thescreenisblanked.Keyinavaluefrom1-30min-utes,thenpress[Enter].Asettingof0disablesthisfunction.Thedefaultis0(disabled).
HOTKEYCOMMANDMODE
Enables/Disablesthehotkeycommandfunctionifaconflictwithprogramsrunningonthecomputersoccurs.
HOTKEY TogglebetweenthetwoHotkeyModeinvocationsequences.Optionsare[Num Lock, Minus]and[Ctrl, F12].
OSDLANGUAGE DetermineswhichlanguagetheOSDmenusaredisplayedin.ChoicesareEnglish,Spanish,French,GermanandJapanese.
TOUCHPAD Enables/Disablesthetouchpad.
F4 Administrator (ADM)F4isanAdministrator-ONLYfunction.ItallowstheAdministratortoconfigureandcontroltheoveralloperationoftheOSD.Tochangeasettingdouble-clickitorusetheUp/DownArrowKeystomovethehighlightbartotheitemandpress[Enter].
Afteranitemhasbeenselected,asubmenuwithadditionalchoiceswillappear.Eitherdouble-clickthedesiredchoice,ormovetheHighlightBartoitandpress [Enter].Aniconappearsbesidetheselectedchoicetoidentifyit.Thesettingsareexplainedinthefollowingtable:
Setting Function
SETUserLOGIN SetstheusernameandpasswordfortheUsersandtheAdministrator.OneAdministratorandfourUser accountsareavailable.ToAdd/Editanaccount,dothefollowing:
• Double-clickonthedesiredaccount,orhighlightitandpressthe[Enter] key.
• Inthescreenthatappears,enterin(oredit)thedesiredusernameandpasswordfortheaccount.Whenfinished,hitthe [En-ter] keytosaveyourchanges.TextwillappearatthebottomoftheOSDstatingUserSETUPOK,lettingyouknowyourchangeshavebeensaved.
Usernamesandpasswordscanbeupto16characterslong,usinganycombinationoflettersandnumbers(A-Z,0-9),andthefollowingcharacters:Asterisk[*],Parentheses[()],Plus[+],Minus[-], Colon [:], Comma [,],QuestionMark[?],Period[.], ForwardSlash[/]andSpace.UsernamesandpasswordsareNOTcasesensitive.TheywillalwaysdisplayasuppercaseintheOSD.Todeleteacharacterintheusernameorpassword,simplyhitthe[Backspace] key.
SETACCESSIBLEPORTS
ThisallowstheAdministratortosetportaccessrightsforeachUser.ThefourUseraccountsaredisplayedincolumnsatthetopoftheOSD,andtheportsaredisplayedasrowsontheleftofthescreen.UsethearrowkeystomovetothedesiredUserandportfield,orsimplyusethetouchpadandclickontheUserandportfieldyouwishtoedit.Pressthe[Spacebar] to toggle betweenthreeoptions:
1. F–FullAccess.2. V–ViewOnlyAccess.3.[Blank] –NoAccess.Bydefault,allUsershaveFullAccesstoeveryport.AstheAdministratorhasaccesstoallportsandsettingsintheKVM,youcan not change their access rights.
SETLOGOUT TIMEOUT
Ifthereisnoinputfromtheconsolefortheamountoftimesethere,theUserwillbeloggedout,requiringthemtore-entertheirUsernameandpasswordtoregainaccesstotheKVM.Thiscanbesetfrom0to180minutes,with0disablingthefunc-tion.Simplytypeinthedesiredtimeframeandhitthe[Enter] keytosaveyourchange.Thisisdisabled(0)bydefault.
EDITPORTNAMES ThisfunctionallowstheAdministratortogiveeachportauniquename,makingiteasiertofindthecomputeryouwanttoaccess.Toadd/editaportname,dothefollowing:
1.Selecttheportbydouble-clickingonit,orbyhighlightingitandhittingthe [Enter] key.
2.Anamefieldwillappearatthebottomofthescreen.Addoredittheportnameandhitthe[Enter] key to save the change. Toexitwithoutsavingthechange,hitthe [Esc] key.
Portnamescanhaveamaximumof12characters,includinganycombinationoflettersandnumbers(A-Z,0-9),andthefollowingcharacters:Asterisk[*],Parentheses[()],Plus[+],Minus[-], Colon [:], Comma [,],QuestionMark[?],Period[.], ForwardSlash[/]andSpace.PortnamesareNOTcasesensitive.TheywillalwaysdisplayasuppercaseintheOSD.
7. oSD (on-Screen Display) operation
7.6 oSD Functions
16
Setting Function
RESTOREDEFAULTVALUES
ThisallowstheAdministratortorestoreallOSDsettingstotheirfactorydefaultvaluesexceptfortheportnamesanduser-name/passwords.Whenthisfunctionisaccessed,promptwillappearaskingifyouwishtorestorethedefaultsettings.Ifyes,type in a Y and hit the [Enter]key.Ifno,pressthe [Esc]keytogobacktothepreviousmenu.
CLEARTHENAMELIST
ThisfunctionallowstheAdministratortoclearalloftheportnamesthathavebeenentered.AswiththeRESTOREDE-FAULTVALUES,youwillbeprompteduponaccessingthisfunction.Ifyouwishtoclearthenamelist,typeinaY and hit the [Enter]key.Ifnot,pressthe [Esc]keytogobacktothepreviousmenu.
ACTIVATEBEEPER TurnstheBeepersoundONorOFF.TypeinYtoturntheBeepersoundON,orNtoturnitOFF.Youdonotneedtohitthe [Enter] key after typing in Y or N,thechangewillbemadeautomatically.
SETQUICKVIEWPORTS
TheAdministratorcanusethisfunctiontomarkportsasQuickViewports.ThisgivestheAdministratorawaytocustomizewhichportsaredisplayedintheOSDmainmenu,andwhichareaccessibleinAutoScanandSkipModes.TosetportsasQuickViewports,dothefollowing:
1.Highlightthedesiredportandhitthe[Enter]key,orclickonitusingthetouchpad.2.Pressthe[Spacebar] totoggleQuickViewstatusON/OFF.AniconwillappearintheQVcolumnnexttotheselectedportwhenQuickViewstatusisturnedON.
OnceQuickViewportsareset,theAdministratorcansetuptheOSDmainpagetodisplayonlyQuickViewports,oronlyQuickViewportsthatarepoweredON.TheAdministratorcanalsosetitupsothatonlyQuickViewports,orpoweredONQuickViewports,areaccessibleinAutoScanorSkipModes.
RESETSTATIONIDS ThisfunctionisusedwhenyouchangethepositionofoneoftheKVMstationsinadaisy-chain.Whenyouchangetheposi-tionofthestation,theOSDdoesnotrecognizethechange,andwillnotautomaticallyupdatethemainmenutodisplaythestationsincorrectorder.Whenthisfunctionisused,theKVMwillscantheentireinstallationandupdatethestationnumbersaccordingly.Theportnamesoftheaffectedstationswillbekept;however,youwillneedtomanuallyupdateallothersettings(SETACCESSIBLEPORTS,SETQUICKVIEWPORTS,etc.).
SETOPERATINGSYSTEM
ThisallowstheAdministratortosettheoperatingsystemfortheporttomatchthatoftheconnectedcomputer.Tosettheoperatingsystem,dothefollowing:
1.Highlightthedesiredportorclickonitusingthetouchpad.
2.Pressthe [Spacebar] totogglebetweenfouroptions;WIN,MAC,SUNandOTHER.EachportissettoWINbydefault.3.Youdonotneedtopressthe[Enter] key to save this setting.
FIRMWAREUP-GRADE
InordertoupgradetheKVMsfirmware,FirmwareUpgradeModemustbeinvokedviathissetting.(Seepage18fordetailsonperformingafirmwareupgrade.)Whenyouselectthisoption,thefirmwareversionnumbersaredisplayedontheOSDscreen,andapromptwillaskifyouwishtocontinuewithafirmwareupgrade.Ifyes,typeinY.Ifno,typeinN.
KEYBOARD LANGUAGE
SetsthelanguageforanexternalkeyboardconnectedtotheKVMsexternalkeyboardport.Toselectakeyboardlanguage,double-clickonthedesiredlanguageorhighlightitandhitthe[Enter]key.YoucanchoosebetweenUSEnglish,UKEnglish,German,SwissGerman,French,Hungarian,Italian,Japanese,Korean,Russian,Spanish,SwedishandTraditionalChinese.
SETCONSOLEMODE
ThisallowstheAdministratortosetwhichconsolesareenabledforuse.Pressthespacebartotogglebetweenthreechoices:
1.Mode0–Bothconsolesareenabled.
2.Mode1–Onlythebuilt-inLCDconsoleisenabled.
3.Mode2–Onlytheexternalconsoleisenabled.
ThissettingdefaultsatMode0.(Bothconsolesareenabled.)
F5 Skip (SKP) InvokestheSkip(SKP)ModebyclickingtheF5 field or pressing [F5].Thisfunctionskipsbackwardorforward—switchingtheconsolefocusfromthecurrentlyactivecomputerporttothepreviousornextavailableone.
TheselectionofcomputerstobeavailableforSkipModeswitchingismadewiththe• Scan/Skip Mode settingundertheF3 SET function(seepage15).
WhenintheSkipMode,press:•
[• ] toswitchtothepreviouscomputerinthelist
[• ] toswitchtothenextcomputerinthelist
[• ] toswitchtothelastcomputeronthepreviousstationinthelist
[• ] toswitchtothefirstcomputeronthenextstationinthelist
Ifaporthasbeenselectedfor• Scan/Skip Mode,aLeft/RightTrianglesymbolappearsbeforeitsPortIDDisplay(whenthefocusswitchestothatport),to indicate so.
ThekeyboardandmousewillnotfunctionnormallyinSkipMode.TheonlykeysyouwillbeabletousearetheArrowkeys.TheSkipModemustbe•exitedinordertoregainnormalcontrolofthekeyboardandmouse.
ToexitSkipMode,press• [Esc] or [Spacebar].
7. oSD (on-Screen Display) operation
7.6 oSD Functions
17
F6 Broadcast Mode (BRC) F6isanAdministrator-ONLYfunction.ClickingtheF6 field,orpressing[F6],invokesBroadcast(BRC)Mode.Whenthisfunctionisineffect,commandssentfromtheconsolearebroadcasttoallavailablecomputers on the installation.
Thisfunctionisparticularlyusefulforoperationsthatneedtobeperformedonmultiplecomputers,suchasperformingasystem-wideshutdown,install-ingorupgradingsoftware,etc.
BRCworksinconjunctionwiththeF2 LIST function.TheLISTfunction(seepage15)letsyoutailorthelistofportstheOSDwilldisplayontheOSDMainScreen.Whenacommandisbroadcast,itisdoneonlytotheportscurrentlydisplayedontheOSDMainScreen.
ASpeakersymbolappearsbeforethePortIDDisplaytoindicateBRCModeisineffect.•
ThemousewillnotfunctionwhiletheBRCModeisineffect.YoumustexittheBRCModeinordertoregaincontrolofthemouse.•
ToexitBRCMode,invoketheOSD(withtheOSDhotkey),thenclickthe• F6 field,orpress[F6].
F7 Scan (SCAN) InvoketheAutoScanModebyclickingtheF7 field or pressing [F7].Thisfunctionallowsyoutocyclethroughavailablecomputersatregularintervalssothatyoucanmonitortheiractivitywithouthavingtotakethetroubleofswitchingyourself.
TheselectionofcomputerstobeincludedforAutoScanningismadewiththeScan/SkipModesettingunderthe• F3 SETfunction(seepage15).
TheamountoftimethateachportdisplaysforissetwiththeScanDurationsettingunderthe• F3 SETfunction(seepage15).Whenyouwanttostopataparticularlocation,pressthe[Spacebar] or [Esc] to stop scanning.
Ifthescanningstopsonanemptyport,oronewherethecomputerisattachedbutispoweredoff,themonitorscreenwillbeblank,andthemouseand•keyboardwillhavenoeffect.AftertheScan Duration timeisup,theScanfunctionwillmoveontothenextport.
Aseachcomputerisaccessed,an• S appearsinfrontofthePortIDdisplaytoindicatethatitisbeingaccessedunderAuto Scan Mode.
WhileAutoScanModeisineffect,thekeyboardandmousewillnotfunction.YoumustexitAutoScanModeinordertoregaincontroloftheconsole.•
WhileinAutoScanMode,thescanningcanbepausedinordertokeepthefocusonaparticularcomputer• eitherbypressingP,orwithaleftclickofthemouse.
ToexitAutoScanMode,pressthe• [Spacebar] or [Esc].
F8 Log out (LoUT) ClickingtheF8fieldorpressing [F8]logsyououtoftheKVMswitch,andblankstheConsolescreen.Thisisdifferentfromsimplypressing [Esc] to deactivatetheOSD.WiththisfunctionyoumustloginagaintoregainaccesstotheKVM,whereaswith[Esc],youareonlyloggedoutoftheOSDscreen.
Note: 1. When you reenter the OSD after logging out, the screen stays blank except for the OSD Main Menu. You must input your password before you can continue.
2. If you reenter the OSD after logging out, and immediately use [Esc] to deactivate the OSD without having selected a port from the OSD menu, a Null Port message displays on the screen.The OSD Hotkey will bring up the Main OSD Screen.
7. oSD (on-Screen Display) operation
8. Firmware Upgrade Utility
7.6 oSD Functions
8.1 Before you Begin
Toprepareforthefirmwareupgrade,dothefollowing:
FromacomputerthatisnotpartofyourKVMinstallationgotothe1. supportsectiononwww.tripplite.comandchoosethemodelnamethatrelatestoyourdevicetogetalistofavailableFirmwareUpgradePackages.
ChoosetheFirmwareUpgradefileyouwanttoinstall(usuallythe2. mostrecent),anddownloadittoyourcomputer.
UsetheFirmwareUpgradeCable(providedwiththisunit),toconnect3.aCOMportonyourcomputertotheFirmwareUpgradePortofyourswitch.Note: When daisy-chaining B020-U16 KVM Switches ONLY, a firmware upgrade to station 1 will upgrade all connected KVMs. All B022-016 KVMs will need to be upgraded individually.
Shutdownallofthecomputers.4.
FromyourKVMswitchconsole,bringuptheOSDandselectthe5. F4 ADMfunction.(Seepage16.)
Scrolldownto6. FIRMWARE UPGRADE.Press[Enter],thenpress[Y]toinvokeFirmwareUpgradeMode.Foryourreference,thecurrentfirmwareupgradeversiondisplaysonthescreen.
18
Toupgradeyourfirmware:
RunthedownloadedFirmwareUpgradeUtilitybydouble-clickingthe1. fileiconorbyopeningacommandlineandenteringthefullpathtoit.TheFirmwareUpgradeUtilityWelcome screen appears.
Readand2. Agree totheLicenseAgreement(clicktheI Agree radio button).
Click 3. [Next]tocontinue.TheFirmwareUpgradeUtilitymainscreenappears:
Theutilityinspectsyourinstallation.AllthedevicescapableofbeingupgradedbythepackagearelistedintheDevice List panel.
Asyouselectdevices,adetaileddescriptionofeachappearsinthe4.Device Description panel.
Afteryouhavemadeyourselection(s),click5. [Next] to perform the upgrade.IfyouenabledCheck Firmware Version,theutilitycomparesthedevice’sfirmwarelevelswiththatoftheupgradefiles.Ifitfindsthatthedevice’sversionishigherthantheupgradeversion,itbringsupadialogboxinformingyouofthesituationandgivesyoutheoption to Continue or Cancel.
IftheCheck Firmware Versionisnotenabled,theutilityinstallstheupgradefileswithoutcheckingwhethertheyareahigherlevelversion.
Astheupgradeproceeds,statusmessagesappearintheStatusMessagespanel,andtheprogresstowardcompletionisshownontheProgress bar.
8. Firmware Upgrade Utility
8.2 Starting the Upgrade
8.3 Upgrade Succeeded
Aftertheupgradehascompleted,ascreenappearstoinformyouthattheprocedurewassuccessful:
Click Finish toclosetheFirmwareUpgradeUtility.
Iftheupgradefailedtocompletesuccessfully,adialogboxappearsaskingifyouwanttoretry.ClickYes toretry.IfyouclickNo,theUpgrade Failed screenappears:
Click Cancel toclosetheFirmwareUpgradeUtility.Seethenextsection,Firmware Upgrade Recovery,forhowtoproceed.
8.4 Upgrade Failed
19
8. Firmware Upgrade Utility
9. Appendix A
Afirmwareupgraderecoveryisrequiredinanyofthefollowingsituations:
WhenyouinvokeFirmwareUpgradeMode(seepage18),butdecidenottoproceedwiththeupgrade.•
Whenthemainboardfirmwareupgradefails.•
WhentheI/Ofirmwareupgradefails.•
Toperformafirmwareupgraderecovery,dothefollowing:
Slidethe1. Firmware Upgrade Recovery Switch (seepage4)totheRecover position.
Power-offandrestarttheswitchaccordingtotheinstructionsbelow:2.
•Shutdownallthecomputersthatareattachedtoit.Note: Unplug the power cord of any computer that has the KeyboardPowerOn function. Otherwise, the KVM will still receive power from this computer.
Wait10seconds,thenplugtheKVMswitchbackin.•
Oncetheswitchisup,thecomputerscanbepoweredON.•Note: If you have shut down more than one Station, power up the highest Station first and work your way down to the lowest one.
Slidethe3. Firmware Upgrade Recovery Switch backtotheNormal position.
Upgradeyourfirmwareusingthestepsfrompages18-19.4.
8.5 Firmware Upgrade Recovery
9.1 Specifications
SpecificationB020-U08-19-K &
B020-U08-19KTAAB020-U16-19-K B022-U16
PortSelectionMethods Push-button,Hotkey,OSD
CPUPorts (x8)HD18Female (x16)HD18Female
ExternalConsolePort(s) HD18Male
ExternalMousePort(s) USBAFemale N/A
Daisy-ChainPort DB25Male (x1)DB25Male,(x1)DB25Female
MaxConnectionsviaDaisy-Chain 504 512
FirmwareUpgradePort RJ11Female
PowerOutlet IEC-320-C14 DCPowerAdapterJack
SharedPeripheralPort(s) USB1.1AFemale
RequiredKVMCableKits P778-SeriesUSB/PS2ComboKVMCableKits
IncludedCableKits (x8)P778-0066ftKVMCableKits(x2)P778-0066ftKVMCable
Kits
OnlineLEDs (x8)Orange (x16)Orange
SelectedLEDs N/A (x16)Green
PortLED NumericalLED(Orange) N/A
StationLED NumericalLED(Orange)
PowerLED Blue Green
Keyboard/MouseEmulation USBandPS/2
MaxVideoResolution 1280x1024@75Hz,DDC2B 2048x1536,DDC2B
AutoScanInterval User-Definable(1to255seconds)
I/PRating 100-240VAC,50/60Hz,1A 100-240VAC,50/60Hz,0.5A
PowerConsumption 120V,28.5W/230V,29.1W DC5.3V,6.6W
OperatingTemperature 0to50°C
StorageTemperature -20to60°C
Humidity 0to80%RH,Noncondensing
Weight 30.6lbs 31.3lbs 6.3lbs
Dimensions(HxWxD)Inches 1.75x17x27 1.75x17x6
20
FCC Notice, Class AThisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.
Note: ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferencewhentheequipmentisoperatedinacommercialenvironment.Thisequipmentgenerates,uses,andcanradiateradiofrequency energy and, if not installed and used in accordancewith the instructionmanual,may cause harmful interference to radio communications.Operation of thisequipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcasetheuserwillberequiredtocorrecttheinterferenceathisownexpense.Theusermustuseshieldedcablesandconnectorswiththisequipment.AnychangesormodificationstothisequipmentnotexpresslyapprovedbyTrippLitecouldvoidtheuser’sauthoritytooperatethisequipment.
Thefactorydefaultsettingsareasfollows: Setting DefaultOSDHotkey [Scroll Lock] [Scroll Lock]*PortIDDisplayPosition UpperLeftCorner
PortIDDisplayDuration 3Seconds
PortIDDisplayMode ThePortNumberplusthePortName
ScanDuration 5Seconds
Scan/SkipMode All
ScreenBlanker 0(Disabled)
LogoutTimeout 0(Disabled)
AccessiblePorts F(Full)forallusersonallportsBeeper Y(Activated)
*Useofthe[Scroll Lock]keyrequiresthe[Fn]keytobehelddown.
9. Appendix A
10. Appendix B
11. Warranty
12. Warranty Registration
9.2 oSD Factory Default Settings
10.1 FCC Radio/TV Interference Notice
1-YEAR LIMITED WARRANTY
TRIPPLITEwarrantsitsproductstobefreefromdefectsinmaterialsandworkmanshipforaperiodofone(1)yearfromthedateofinitialpurchase.TRIPPLITE'sobligationunderthiswarrantyis limitedtorepairingorreplacing(at itssoleoption)anysuchdefectiveproducts.Toobtainserviceunderthiswarranty,youmustobtainaReturnedMaterialAuthorization(RMA)numberfromTRIPPLITEoranauthorizedTRIPPLITEservicecenter.ProductsmustbereturnedtoTRIPPLITEoranauthorizedTRIPPLITEservicecenterwithtransportationchargesprepaidandmustbeaccompaniedbyabriefdescriptionoftheproblemencounteredandproofofdateandplaceofpurchase.Thiswarrantydoesnotapply toequipmentwhichhasbeendamagedbyaccident,negligenceormisapplicationorhasbeenalteredormodified inanyway.EXCEPTASPROVIDEDHEREIN,TRIPPLITEMAKESNOWARRANTIES,EXPRESSORIMPLIED,INCLUDINGWARRANTIESOFMERCHANTABILITYANDFITNESSFORAPARTICULARPURPOSE.Somestatesdonotpermitlimitationorexclusionofimpliedwarranties;therefore,theaforesaidlimitation(s)orexclusion(s)maynotapplytothe purchaser. EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL ORCONSEQUENTIALDAMAGESARISINGOUTOFTHEUSEOFTHISPRODUCT,EVENIFADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGE.Specifically,TRIPPLITEisnotliableforanycosts,suchaslostprofitsorrevenue,lossofequipment,lossofuseofequipment,lossofsoftware,lossofdata,costsofsubstitutes,claimsbythirdparties,orotherwise.
Visitwww.tripplite.com/warrantytodaytoregisterthewarrantyforyournewTrippLite product.You'll be automatically entered into a drawing for a chance towin aFREETrippLiteproduct!*
*Nopurchasenecessary.Voidwhereprohibited.Somerestrictionsapply.Seewebsitefordetails.
Warning!Useofthisequipmentinlifesupportapplicationswherefailureofthisequipmentcanreasonably be expected to cause the failure of the life support equipment or tosignificantly affect its safetyor effectiveness is not recommended.Donotuse thisequipment in the presence of a flammable anestheticmixture with air, oxygen ornitrousoxide.
Regulatory Compliance Identification NumbersForthepurposeofregulatorycompliancecertificationsandidentification,yourTrippLite product has been assigned a unique series number.The series number canbefoundontheproductnameplatelabel,alongwithallrequiredapprovalmarkingsandinformation.Whenrequestingcomplianceinformationforthisproduct,alwaysreferto the series number.The series number should not be confusedwith themarkingnameormodelnumberoftheproduct.
The policy of TRIPP LITE is one of continuous improvement. Specifications aresubjecttochangewithoutnotice.
201005077•932900-EN
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)UndertheWasteElectricalandElectronicEquipment(WEEE)Directiveandimplementingregulations,whencustomersbuynewelectricalandelectronicequipmentfromTrippLitetheyareentitledto:
•Sendoldequipmentforrecyclingonaone-for-one,like-for-likebasis(thisvariesdependingonthecountry)
•Sendthenewequipmentbackforrecyclingwhenthisultimatelybecomeswaste
1111 W. 35th Street, Chicago, IL 60609 USAwww.tripplite.com/support
21