a to z safety · conduct underwater cathodic protection remediation install galvanic anodes on...
TRANSCRIPT
A TO Z SAFETY Work Safe to Have a Life
636-528-5444
Judy Magby/Owner 100 Manda Ct Troy Mo 63379 636-443-5139 [email protected]
A To Z Enterprise, LLC Mission Statement
It shall be the mission, goals, and desires of A To Z Enterprise, LLC to provide the best possible training for the construction industry, using the latest instruction methodology, lesson plans, and equipment. We promise to deliver up to date instructional materials and information along with the latest methods of testing and evaluation. Our clients are the most important portion of our business and we strive to provide them with the best information and certifications possible at an affordable price and in a timely manner.
“Safety through education is no accident”
A TO Z SAFETY “Safety through education is no accident”
636-528-5444 OSHA: OSHA COMPLIANCE AUDITS OSHA COMPLIANCE CONSULTING HAZMAT TRAINING HAZWOPER 8 HR AWARENESS HAZWOPER 24 HOUR HAZWOPER 40 HOUR TECHNICIAN HAZWOPER SUPERVISOR 8 HOURS ( MUST HAVE COMPLETED 40 HOUR
COURSE) HAZWOPER 8 HOUR REFRESHER OSHA COMPLIANCE COURSES: BLOODBORN PATHOGENS BASIC SAFETY INTRODUCTION HAZARD COMMUNICATION PERSONAL PROTECTIVE EQUIPMENT WORK-ZONE SAFETY ELECTRICAL AND HIGH-VOLTAGE HAZARDS FIRE PROTECTION/PREVENTION HAND-POWER TOOL SAFETY WELDING SAFETY FALL PROTECTION STEEL ERECTION WALKING AND WORKING SURFACES LADDERS AND SCAFFOLDING HORIZONTAL DRILLING HAZARDS HEAVY-EQUIPMENT, CRANE AND RIGGING SAFETY EXCAVATION TRENCHING AND SHORING FORKLIFT SAFETY LOCKOUT/TAGOUT CONFINED SPACE CONCRETE AND MASONARY RESPIRATOR TRAINING AND FIT TESTING CRANES AND DERRICKS OSHA 10 AND 30 HOUR COMPLIANCE COURSES
Health and Safety Programs:
SAFETY PROGRAM DESIGN SAFETY MANUAL DESIGN: (INCLUDING BUT NOT LIMITED TO) PROCESS SAFETY MANAGEMENT (PSM) OQ MANAGEMENT PLAN GENERAL PLANT SAFETY CONTROL OF HAZARDOUS ENERGY (LOCK OUT/TAG OUT) FLAMMABLE AND COMBUSTIBLE LIQUIDS PERSONAL PROTECTIVE EQUIPMENT (PPE) RESPIRATORY PROTECTION PORTABLE FIRE EXTINGUISHERS HAND AND POWER TOOLS ELECTRICAL SAFETY HAZARD COMMUNICATION (MSDS) COMPRESSED GASSES EMERGENCY ACTION/FIRE PREVENTION EMERGENCY RESPONSE ERGONOMICS (LIFTING SAFETY ETC…) EXPOSURE CONTROL FOR BLOODBORNE PATHOGENS GASES, VAPORS, FUMES, DUSTS, MISTS HAZARD ASSESMENT HEARING CONSERVATION HOUSEKEEPING MEDICAL SURVEILLANCE/FIRST AID FALL PROTECTION STAIRWAYS AND LADDERS WELDING AND CUTTING PROCEDURES HOTWORK EXCAVATION/TRENCHING CONFINED SPACES RIGGING LIFTS/HOISTS/CRANES FORKLIFT SAFETY/TRAINING SHORT SERVICE EMPLOYEE (SSE) LEAD SAFETY AND AWARENESS
DATABASE CONSULTING:
WE OFFER THIRD PARTY DATABASE CONSULTING ISNetworld PEC PREMIER
OPERATOR QUALIFICATION AND VERIFICATION:
VERIFORCE SKILLS EVALUATIONS PIPELINE PERFORMANCE EVALUATIONS/VERIFICATIONS OQSG OPERATOR QUALIFICATIONS AND TRAINING
COVERED TASKS
Prevention of Atmospheric Corrosion Understanding the function of preventing atmospheric
corrosion Perform an inspection of coatings Perform surface preparation Perform application of coatings Recognize and properly react to abnormal operating conditions
Electrical Inspection of Coatings
Perform electrical inspection of coatings Identify and respond to abnormal operating conditions
Catastrophic Line Failure
Understand the severity of a catastrophic line failure Recognize indications of a major leak Identify a catastrophic line failure Respond to a catastrophic line failure
Control Room Emergency Response Identify characteristics of hazardous liquids Recognize abnormal operating conditions and pipeline
emergencies Respond to abnormal operating conditions and pipeline
emergencies Perform emergency response procedures
Cathodic Protection Inspection on
Underwater Facilities Prepare and calibrate test equipment Take and record cathodic protection readings Identify and respond to abnormal operating conditions
Maintain Test Leads Define and understand the function of a test lead and the
equipment used to maintain it Correctly inspect and verify test lead continuity Repair or replace damaged test leads Explain how to recognize and react to abnormal conditions
Prevent External Corrosion on Underwater Pipeline
Inspect existing coatings Perform surface preparation for coating repair Repair coatings and applications Identify and respond to abnormal operating conditions
Inspect Cathodic Protection Rectifiers Obtain voltage and current output readings from rectifier and
check for proper rectifier operations Perform cathodic protection rectifiers on/off test Recognize and react to abnormal operating conditions when
inspecting cathodic protection rectifiers
Measure Wall Thickness of Underwater
Pipe Prepare and calibrate test equipment Measure wall thickness using ultrasonic testing methods Measure pit depth and diameter with pit gauge Identify and respond to abnormal operating conditions
Cathodic Protection Rectifier
Maintenance and Repair Troubleshoot and repair rectifiers Adjust a rectifier Recognize and react to abnormal operating conditions when
troubleshooting and repairing rectifiers
Conduct Underwater Cathodic Protection Remediation
Install galvanic anodes on submerged pipeline or facilities Identify and respond to abnormal operating conditions
Electrically Inspect Buried Pipe
Understand the definitions and functions of electrical inspection of bare pipe
Conduct soil resistivity measurements Perform soil-to-soil potential surveys Recognize and react to abnormal operating conditions when
electrically inspecting bare pipe
Conduct Temporary Marking of
Underwater Pipelines Locate pipeline Determine pipeline depth Install temporary pipeline marker Identify and respond to abnormal operating conditions
Conduct Underwater Valve Inspection, Operation, Maintenance and Repair Identify valve types and components Conduct visual inspection of valve and flanges Identify maintenance procedures Repair valve as instructed Identify and respond to abnormal operating conditions
Measure Wall Thickness Understand the requirements for measuring the wall thickness
of pipe Use a pit depth gauge Use an ultrasonic thickness meter (UST)
Collect RSTRENG Data Recognize and react to abnormal operating conditions when
measuring wall thickness
Movement of In-service Underwater
Pipeline Move in-service pipeline Conduct Inspection of Pipeline for Secondary Stresses, Physical
Damage, and Coating Damage Identify and respond to abnormal operating conditions
Conducting Cathodic Protection
Remediation Install electrical bonds Install Galvanic and Impressed Current Anodes Perform transformer/rectifier installations Perform test station installations Perform thermite welding procedures Locate, monitor, and clear shorted casings
Abandoning, Safe Disconnect,
Purging, and Sealing of Underwater Pipeline
Purge pipeline Safely disconnect pipeline Seal disconnected segment of pipeline Bury disconnected segment of pipeline Identify and respond to abnormal operating conditions
Monitoring for Internal Corrosion Safely extract or insert corrosion coupons Safely extract and insert corrosion probes Properly collect composite or spot samples for analysis of
corrosive properties Explain how to recognize and react to abnormal conditions
Installation, Replacement, or Repair of
Support Structures on Underwater Components
Replace or repair support structures on existing underwater components
Install additional underwater support structures to components Identify and respond to abnormal operating conditions
Inspect (Examine) Buried Pipe When
Exposed Inspect for physical damage Inspect the condition of the pipe coating Inspect for corrosion Explain how to recognize and react to abnormal conditions for
inspecting and examining buried pipe when exposed
Inspection of Underwater Pipeline
Facilities Conduct general pipeline inspection Inspect pipeline crossings Inspect flanged tie-ins Inspect repairs Inspect support structures Identify and respond to abnormal operating conditions
Inspect and Calibrate Overfill Protective Devices
Define overfill protective devices and their purpose Inspect and calibrate overfill protective devices Explain how to recognize and react to abnormal conditions for
inspecting and calibrating overfill protective devices
Perform Underwater Pipeline Repair
Activities Excavate pipeline Install mechanical split sleeve repair clamp Perform basic cutting operations Install mechanical coupling Install spool piece Identify and respond to abnormal operating conditions
Internal Corrosion Remediation
Adjust inhibitor injection rates to achieve an acceptable industry and company standard to prevent internal corrosion
Explain how to recognize and react to abnormal conditions for internal corrosion remediation
Operation of an Underwater Assembly Manually operate valves on an underwater assembly Identify and respond to abnormal operating conditions
Inspect Internal Pipe Surfaces
Recognize different types of internal corrosion and their mechanisms
Possess a working knowledge of tools used for internal corrosion evaluation
Recognize and react to abnormal operating conditions when inspecting internal pipe surfaces
Perform Underwater Pigging Activities Perform basic launching procedures Perform basic receiving procedures Identify and respond to abnormal operating conditions
Application and Repair of External
Coatings Identify and describe the different types of external coatings
and how they are applied Identify and describe the actions that must be taken in order to
apply and repair external coatings Recognize and react to abnormal operating conditions when
applying and repairing external coatings
Perform Underwater Flange Mating
Procedures Perform general flange assembly procedures Perform general flange disassembly procedures Identify and respond to abnormal operating conditions
Place and Maintain Line Markers
Define and understand the placing and maintaining of line markers
Locate a pipeline Install a line marker Inspect and maintain line markers and aerial line markers Recognize and react to abnormal operating conditions
Perform an Underwater Mechanical Hot Tap
Pipeline coating removal Conduct pipeline quality checks Install hot tap fitting Operate hot tapping tool and remove coupon Repair coating and bury pipeline as required Identify and respond to abnormal operating conditions
Inspecting Surface Conditions of Right-of-Way and Perform Leak Surveys for
Gas Pipelines Inspect surface conditions of right-of-way Perform gas leakage surveys Follow the company’s reporting protocols Recognize and react to abnormal operating conditions when
inspecting surface conditions of right-of-way and performing leak surveys
Inspecting Surface Conditions of Right-of-Way and Perform Leak Surveys for
Liquid Pipelines Inspect surface conditions of right-of-way Follow the company’s reporting protocols Recognize and react to abnormal operating conditions when
inspecting surface conditions of right-of-way and performing leak surveys
Inspect Navigable Waterway Crossings Define and demonstrate a working knowledge of inspecting
navigable waterway crossings Use probes, sonar and other methods to verify the location of a
pipeline and determine depth of cover Recognize and properly react to abnormal operating conditions
Inspection of Breakout Tanks
Define and demonstrate a working knowledge of regulatory compliance and inspection requirements for breakout tanks
Inspect breakout tanks in accordance with API Standard 653 Inspect breakout tanks in accordance with API Standard 510 Inspect other breakout tanks
Provide Temporary Marking of Buried
Pipeline Prior to Excavation Define and Understand the Function of Providing Temporary
Marking of Buried Pipeline Prior to Excavation and the Equipment Used to Mark It
Locate a Pipeline Install Appropriate Temporary Markers Identifying the Line Inspect and Maintain Temporary Line Markers
Inspection Following Excavation
Activities and Leak Survey after Blasting Define and demonstrate knowledge of inspection procedures
performed following excavation activities and leak survey performed after blasting
Utilize leak survey techniques Monitor for pressure loss Explain how to recognize and react to abnormal conditions for
inspection following excavation activities and leak survey after blasting
Provide Security for Pipeline Facilities Provide protection to the pipeline facilities Recognize and react to abnormal operating conditions when
providing security for pipeline facilities
Inspect Valves
Inspect valves Conduct a routine walk-around inspection Conduct an external integrity inspection of the valve Perform a function test of the valve Recognize and react to abnormal operating conditions when
inspecting valves
Repair Valves
Understand valve types and components Repair valves Repair actuators/operators Recognize and react to abnormal operating conditions when
repairing valves
Inspect, Test and Calibrate Relief Valves Recognize the purpose and function of relief valves Understand the terminology associated with inspecting, testing,
and calibrating relief valves Identify the procedures for the inspection, testing, and
calibration of relief valves Recognize and react to abnormal operating conditions when
inspecting, testing, and calibrating relief valves
Maintain/Repair Relief Valves Identify critical parts associated with a relief valve Disassemble, clean, inspect, repair, and replace internal
components of a relief valve Repair and calibrate the sensing device and reassemble and
reinstall the valve Recognize and react to abnormal operating conditions when
maintaining and repairing relief valves
Inspect, Test and Calibrate Pressure
Limiting Devices Recognize and locate pressure limiting devices Identify procedures for isolation or removal of a pressure
limiting device Inspect, test, and calibrate pressure limiting devices Repair and reinstall pressure limiting devices Recognize and react to abnormal operating conditions when
inspecting and testing and calibrating pressure limiting devices
Inspect, Test and Calibrate Pressure
Switches and Transmitters Identify types of testing methods and when they are used Inspect, test, and calibrate pressure switches and transmitters Recognize and react to abnormal operating conditions when
inspecting, testing, and calibrating pressure switches and transmitters
Verifying or Setting Protection Parameters for Programmable
Controllers and/or Instrumentation Control Loops
Understand the functions of a PLC and elements that are involved
Know how to verify data set points, parameters, and data location within PLC program
Perform calibration, testing, and documentation of system set points
Moving In-Service Pipe
Determine the allowable line pressure in a section of pipe to be moved
Prepare for pipeline movement activities Move in-service pipe Recognize and respond to abnormal operating conditions
Inspect Existing Pipe Following
Movement Define and demonstrate working knowledge of inspecting an
existing pipe following movement Inspect the pipeline for secondary stresses, physical damage,
corrosion and coating damage
Inspection of Clearance of Existing Pipe
to Underground Structures Define and demonstrate working knowledge of inspecting
clearances between existing pipes and underground structures as well as equipment used to perform the inspection
Assure minimum clearances are maintained and that interference and corrosion control testing are performed during the installation of foreign pipelines or structures
Abandoning, Safe Disconnect, Purging, and Sealing of Pipeline Facilities
Define and understand the function of and requirements for permanently or temporarily decommissioning or removing a pipeline facility from service
Safely disconnect pipeline facilities Purge pipeline facilities Seal a disconnected portion of pipeline
Installation, Replacement, or Repair of Support Structures on Existing or New
Aboveground Components Define and demonstrate working knowledge of replacement or
repair of support structures on existing or new aboveground components and how to perform it
Explain activities required to install additional or revised support structure elements to existing aboveground structures
Inspection Activities for Tie-ins, Pipe Replacements, or Other Components Connecting to an Existing Pipeline
Define and demonstrate working knowledge of inspection activities for tie-ins, pipe replacements, or other components connecting to an existing pipeline
Visually inspect pipe and pipe components Verify welder qualifications Ensure proper installation
Backfilling a Trench Following Maintenance
Define and demonstrate working knowledge about the function of backfilling a trench following pipeline maintenance
Perform backfilling operations on the pipeline following maintenance
Determine if a tamping tool and backhoe are used properly Determine the amount of cover required
Performing General Pipeline Repair
Activities Identify and demonstrate knowledge of procedures used for
general pipeline repair activities Install tight fitting sleeves Install oversleeves Install composite wrap sleeves Install mechanical split repair sleeves Install mechanical couplings Perform hot tapping Install pipeline plugs Install completion plugs
Conduct a Pressure Test
Define and understand the function of a pressure test and the equipment used to perform it
Conduct a pressure test and record the results Recognize and react to abnormal operating conditions when
conducting a pressure test
Maintenance Welding on Pipelines Supervise, inspect and or perform maintenance welding on
pipelines Repair arc burns Repair defective welds other than welds containing cracks Repair a cover pass on a weld containing a defect other than a
crack Repair butt welds containing cracks Repair previously repaired areas Replace welds or cylinders of pipe Recognize and react to abnormal operating conditions when
performing maintenance welding on pipelines
Operations of a Pipeline System
Identify the activities associated with the safe start-up of a pipeline
Identify the steps necessary for the safe shutdown of a pipeline Monitor and maintain pressures, flows, communications, and
line integrity Operate valves using manual or remote methods Recognize abnormal operating conditions for the task and
identify proper response
Computational Pipeline Monitoring
(CPM) Understand functions of CPM equipment Test, calibrate, repair, replace, and maintain CPM equipment Verify that the leak detection system meets design
specifications Explain how to recognize and react to abnormal conditions to
perform CPM leak detection techniques that assist in maintaining the integrity of a pipeline system
Operate Pressure Relieving Devices for Launching and Receiving Facilities
Identify the names and operation of the valves used on a launching facility
Explain the sequence of events needed to isolate, relieve pressure, and drain fluids from the launcher barrel
Understand the procedures involved with launching a pig Identify the names and operations of the valves used on a
receiving facility Understand the procedures involved with receiving a pig Explain the sequence of events needed to isolate, relieve
pressure, and drain fluids from the receiver barrel Recognize and react to abnormal operating conditions during
launching and receiving activities
Performing Maintenance on Valves
Identify components and maintenance of valves Perform valve maintenance Perform actuator/operator maintenance Recognize and react to abnormal operating conditions
Perform Flange Bolting Procedures Identify hazards associated with flange bolting procedures Perform general flange assembly procedures Perform general flange disassembly procedures Identify and respond to abnormal operating conditions
Tubing and Tube Fitting, Handling, and Installation
Demonstrate knowledge of instrumentation tubing, tube fittings and tubing components
Demonstrate the correct methods for handling tubing, tube fittings, and tubing components
Design or verify a correct layout of a tubing system Correctly cut and de-burr metal tubing Perform a correct 90 degree bend of metal tubing Perform installation of small diameter compression tube
fittings Recognize and properly react to abnormal operating conditions
Perform Leakage Survey
Define and demonstrate a working knowledge of leakage surveys and the equipment used to perform them
Perform visual surveys Perform a pipeline leakage survey using a combustible gas
detector Perform a pipeline leakage survey using a flame ionization
detector Recognize and react to abnormal operating conditions when
performing leakage surveys
Vault Maintenance
Define and demonstrate a working knowledge of vault maintenance
Perform vault maintenance
Purge Gas from a Pipeline
Define and understand how to safely purge hydrocarbons or air from a pipeline
Remove hydrocarbons from a pipeline Remove air from the pipeline Recognize and react to abnormal operating conditions when
purging a pipeline
Testing an Emergency Shutdown Device Define and understand the function of testing emergency
shutdown systems Test emergency shutdown systems Explain how to recognize and react to abnormal conditions for
testing an emergency shutdown system
Perform Incremental Pressure
Increases to Uprate MAOP Identify and demonstrate a working knowledge of performing
incremental pressure increases to uprate maximum allowable operating pressure
Perform incremental pressure increases Recognize and react to abnormal operating conditions when
performing incremental pressure increases in order to uprate MAOP
Operate Odorant Equipment
Understand the characteristics of odorants and the requirements for odorants in natural gas pipelines
Determine odorization injection rates and test for odorant levels
Recognize the different types of odorant injection equipment Operate and maintain an odorant injection system Explain how to recognize and react to abnormal conditions for
operating odorant equipment
Gas Detection and Alarm System
Maintenance and Performance Testing Identify and describe gas detection devices and their alarm
systems Calibrate, test, and maintain gas detection systems Recognize and react to abnormal operating conditions while
calibrating, testing, and maintaining gas detection and alarm systems
Isolation of a Gas Compressor Unit Isolate a gas compressor unit Prepare an isolated compressor unit for start-up Recognize and react to abnormal operating conditions when
isolating a gas compressor unit
Compressor Station Inspection and Testing of Remote Control Shutdown
Devices Identify and describe remote control shutdown devices and
associated terms Test remote control shutdown devices Recognize and properly respond to abnormal conditions that
may be encountered
Startup, Shutdown, and Operation of Turbine Driven Gas Compressor Unit Understand the operation of a turbine driven gas compressor
unit Start-up a turbine driven gas compressor unit Shutdown a turbine driven gas compressor unit Operation of an turbine driven gas compressor unit
Start-up, Shutdown, and Operation of an
Engine Driven Gas Compressor Unit Understand the operation of an engine driven gas compressor
unit Start-up an engine driven gas compressor unit Shutdown an engine driven gas compressor unit Operation of an engine driven gas compressor unit
General Abnormal Operating Conditions Define and understand an abnormal operating condition Recognize and respond to the malfunction or failure of pipeline
components Recognize and respond to physical damage to the pipeline
system Recognize and respond to the unexpected activation of a safety
device Recognize and respond to abnormal facility conditions Prevention of accidental of ignition
Documentation, Reporting, and OQ
Recordkeeping Identify and maintain required documentation Identify safety related conditions that require reporting Identify Operator Qualifications (OQ) record keeping
requirements
Inspecting and Remediating Pipeline
Hazard Protection Identify types of pipeline hazards Identify and inspect protective physical barriers Recognize and react to abnormal operating conditions
Damage Prevention During Excavation
Activities By or On Behalf of the Operator
Prepare for excavation activities Perform inspection activities during excavation Inspection activities following excavation Abnormal operating conditions
Conducting Annual Cathodic Protection Surveys
Define and understand the function of conducting annual cathodic protection surveys
Determine the measurement of structure-to-electrolyte potential
Perform close interval survey Perform testing to detect interference Ensure electrical isolation from foreign structures Perform an inspection and electrical test of bonds Complete a visual atmospheric inspection
A to Z Enterprise, LLC
100 Manda Court Troy, MO 63379
Office (636) 528-5444 Fax (636) 528-5443
_______________________________________________________________________________
RATE SHEET
OQSG (Operator Qualification Solutions Group) & Veriforce
Skills Evaluator: $950.00 per day* Proctor: $375.00 per day*
Computer Stations: $ 30.00 per day (per person)*
Class Room Training (Classroom training can be customized to your specific needs)
[Hazwhoper, Forklift, Aerial Lift, 10 & 30 HR OSHA, Fire Extinguisher]
4 HR $ 80.00 each min of 12 people $ 960.00 8 HR $128.00 each min of 8 people $1,024.00 10 HR $160.00 each min of 12 people $1,920.00 30 HR $600.00 each min of 6 people $3,600.00 40 HR $660.00 each min of 7 people $4,620.00
Travel time will be charged
Expense Cost Plus 10% *Day Rates are based on 10 HR days
Paul Geeding Judy Magby Geeding A To Z Enterprise, LLC 100 Manda Court Troy, MO. 63379 636-528-5444 Office 636-528-5443 Fax Paul’s Cell#314-280-7381 Judy’s Cell#636-443-5139
“Safety through education is no accident”