a-slipsense product brochure
DESCRIPTION
This brochure contains the entire current product line-up of our specially formulated anti-slip coating series.TRANSCRIPT
Your logical choice.
Slips, trips and falls are the number one workplace accidents which resulted in the highest man-hours
lost. In the 1st
half of 2012, slips, trips and falls accounted for 3 fatalities, 71 major injuries and over
1,100 cased leading to minor injuries in Singapore as reported on the Workplace Safety and Health
Council report. With the wet weather found in the region, it is only a matter of time before someone
slips and hurt themselves.
Engineered anti-slip solution
The A-SlipSense series of anti-slip coatings are specially engineered by our team of dedicated research
and development staff to withstand heavy traffic from both vehicles as well as pedestrians. In the cured
state, it is exhibits extreme impact and chemical resistance, thus not only protecting your floor surface,
but also ensuring that the coating is long lasting.
Careful planning and efforts were spent to specially
formulate the grain abrasives used in the A-SlipSense. These
abrasives are fine enough for comfort walking yet coarse
enough to obtain the necessary traction. More importantly,
these abrasives are harder than sand to ensure a long lasting
anti-slip effect.
The anti-slip coating can be applied on various substrates
such as:
• Wood
• Concrete
• Metal
• Fiberglass
• Marble
• Other porous materials
Unique profile to provide high traction
When applied, the anti-slip coatings provide a profile of peaks and valleys. This unique profile allows
liquid and contaminants to flow into the valleys, thus leaving the peaks exposed and drastically reduced
any effect of hydroplaning.
A-Slip 75 – Ultra Low Profile Pedestrian Grade Anti-Slip Coating
The A-Slip 75 ultra low profile pedestrian grade is a 2 component coating that combines epoxy resin with
tough, fine grained abrasives to produce a self-sealing, non-slip floor under typical service temperature
of 29°C to 60°C. A-Slip 75 is extremely easy to clean and is ideal in bare foot applications where anti-slip
properties are required.
Packaging : 5kg set
Estimated coverage : 2.4sqm per kg
A-Slip 100 – Low Profile Pedestrian Grade
Anti-Slip Coating
The A-Slip 100 low profile pedestrian grade is a 2
component coating that produces a self-sealing, non-slip
floor under typical service temperature of 29°C to 60°C.
The most commonly used among all pedestrian grades
coating, the A-Slip 100 is ideal for all recreational areas,
industrial and institutional facilities and marine
applications. Typical place for application includes steps,
walkways, entrances, ramps, step ladders, or any areas
that are frequently wet.
Packaging : 5kg set
Estimated coverage : 1.2sqm per kg
A-Slip 150 – Medium Profile Pedestrian Grade Anti-Slip Coating
The A-Slip 150 medium profile pedestrian grade is a 2 component coating that combines epoxy resin
with tough, fine grained abrasives to produce a self-sealing, non-slip floor under typical service
temperature of 29°C to 60°C. The A-Slip 150 contains a high percentage of solids to create a high
traction surface when cured. A-Slip 150 is ideal for areas where there is a possibility of exposure to
highly slippery chemicals such as oil, grease, petrol, and detergents etc.
Packaging : 5kg set
Estimated coverage : 1.2sqm per kg
A-Slip 200 – Medium Profile Vehicular
Grade Anti-Slip Coating
The A-Slip 200 medium profile vehicular grade is a 2
component coating that combines epoxy resin with
tough, fine grained abrasives to produce a self-sealing,
non-slip floor under typical service temperature of 29°C
to 60°C. The A-Slip 200 is a heavy-duty coating
formulated for strong durability to withstand vehicular
traffic, while improving the traction between the floor
and the tires of vehicles significantly. This makes it ideal
for places for forklift traffic, ramps, and loading bays etc.
Packaging : 5kg set
Estimated coverage : 0.23-0.37sqm per kg
A-Slip PR-20 Primer – Porous Surface Primer
The A-Slip PR-20 is a 2 component epoxy based primer developed for use with our A-SlipSense floor
system. It greatly increases adhesion to porous surfaces such as wood, concrete, asphalt, fiberglass,
epoxy surfaces etc.
Packaging : 4.1kg set
Estimated coverage : 4.7-6.5sqm per kg
Available Colours
A-SlipSense anti-slip coatings are available in almost any pastel colours. The readily available colours are:
• Black
• Dark grey
• Light grey
• Beige
• Safety Yellow
• Blue
• Red
• Green
Please refer to our sales representative for any other colour requirements.
See the technical data sheet for more product details.
Chemsense Pte Ltd
621 Aljunied Road
#06-05A, Lipo Building
Singapore 389834
Tel: +65 6100 0258
For enquiry please contact:
Kenneth Ng
Mobile: +65 9693 6503
Email: [email protected]