a scroll economiser cycle for use in multi-temperature ... sirac...a scroll economiser cycle for use...
TRANSCRIPT
![Page 1: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/1.jpg)
A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport
Refrigeration Systems.
Shane Smyth, Donal P. Finn, Barry Brophy and David J. Timoney
School of Electrical, Electronic and Mechanical Engineering
University College Dublin, Ireland
![Page 2: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/2.jpg)
Presentation Outline
1. Context
2. Objective and Approach
3. Experimental Test Facility
4. Experimental Programme and Test Matrix
5. Results – Influence of Injection Ratio on Economiser Pressure
6. Algorithm Development and Evaluation
7. Algorithm Evaluation Results
8. Conclusions
![Page 3: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/3.jpg)
Context
Direct Expansion System Economised Indirect System
Compressor/ Condenser Unit
Primary Circuit Multiple Pumps
![Page 4: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/4.jpg)
Economiser Cycle
![Page 5: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/5.jpg)
Approach
Objective
• The capacity and COP of an economised multi-temperature indirect can be maximised by control of the economiser injection ratio.
• This method of control necessitates mass-flow instrumentation
which is impracticable for field applications.
• An alternative method of control is described based on the more
easily-measured economiser pressure as the primary control
parameter, thereby eliminating the requirement of mass-flow
instrumentation.
Approach
• Experimental Test Rig and ATP Test Matrix
• Influence of Injection Ratio on Economiser Pressure
• Identification of Key Trends and Development of Control Algorithm
• Control Algorithm Implementation and Evaluation
• Conclusions
![Page 6: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/6.jpg)
Experimental Testing Facility
Two Chambered
Insulated Cold Room
Side-by-Side testing of
Direct Expansion and
Secondary Refrigeration
Systems
U Values of chamber
walls experimentally
measured
Solenoid Valves to allow
different flow
configurations
![Page 7: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/7.jpg)
Experimental Test Facility
Secondary
Coolant Pumps
Compressor-
Condenser
UnitScroll Compressor IDX Cooling Coil Chamber 2
Multi-
Chambered
Insulated Cold
Rooms
S&T Condenser
(Water cooled)
• Vapour Injected
• Variable Speed
• Hermetic
DX Remote
EvaporatorsChamber 1
![Page 8: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/8.jpg)
Test Matrix
• Secondary Refrigerant: 50% V/V Aqueous Ethylene Glycol.
• Standard: UNECE ATP Procedure (2003) – Class C Multi-Compartment.
• Mechanically Refrigerated.
• Normally insulated compartment.
• Independent setpoint control between adjacent compartments.
• Test Matrix:
• 3 ATP Chamber Setpoints: -20,-20ºC; -10,-10ºC and 0,0ºC.
• 3 Condensing Temperatures (for each setpoint): +18ºC, +22ºC, +25ºC.
![Page 9: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/9.jpg)
Results: Economiser Pressure Economiser Pressure
0
1
2
3
4
5
6
7
8
9
0 10 20 30 40 50 60
Injection Ratio (INJR) [%]
Pre
ss
ure
[b
ar]
Box 0,0C Box -10,-10C Box -20,-20C
• Strong INJR-Economiser Pressure Relationship.
• Economiser pressure increases continuously with increasing INJR.
• Minimum economiser pressure (SIP) when INJR is zero (no economiser action).
• Different SIP for different ATP set-points.
![Page 10: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/10.jpg)
Examination of Saturated Injection Pressure
SIP v Compressor Suction Pressure
y = 1.64x + 0.475
R2 = 0.99
3
3.5
4
4.5
5
5.5
6
6.5
7
1.5 2 2.5 3 3.5 4
Compressor Suction Pressure (bar)
Satu
rate
d I
nje
cti
on
Pre
ssu
re (
bar)
• SIP strongly dependent on compressor suction pressure.
• Linear Relationship between SIP and compressor suction pressure.
• Strong relationship due to close proximity of injection port to suction port on scroll involute.
![Page 11: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/11.jpg)
Capacity Maximisation
Evaporator Capacity
0
1
2
3
4
5
6
7
8
9
3 4 5 6 7 8 9
Economiser Pressure [bar]
Evap
ora
tor
Cap
acit
y [
kW
]
Box -20, -20C Box -10, -10C Box 0, 0C
• Degree of capacity augmentation depends on the economiser pressure
• Optimum pressure for capacity maximisation.
• Optimum pressure depends on ATP setpoint temperature.
• After optimum economiser pressure, capacity drops due to increased saturation temperature of refrigerant in economiser
![Page 12: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/12.jpg)
COP MaximisationEvaporator COP
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
3 4 5 6 7 8 9
Economiser Pressure [bar]
CO
P
Box 0,0C Box -10,-10C Box -20,-20C
• Bi-polar maxima for optimisation of COP
• Optimised COP under high capacity or low capacity conditions.
• The “low-pressure” optima maximises COP by minimising compressor power.
• The “high-pressure”optima maximises COP at high capacity.
• Choice of optima will depend on power availability and cooling requirements.
![Page 13: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/13.jpg)
Algorithm Development
• Optimum economiserpressure for maximisation of capacity and COP
• SIP determined for each ATP condition by measurement of economiser pressure when no INJR = 0%
• Fitted trendline allows determination of optimum pressure for maximisation of capacity or COP
Optimisation of Capacity
y = 0.84x + 2.87
R2 = 0.85
0
1
2
3
4
5
6
7
8
9
10
3 3.5 4 4.5 5 5.5 6 6.5 7
Saturated Injection Pressure (bar)
Eco
no
mis
er
Pre
ssu
re (
bar)
3 4 5 6 7
Optimisation of COP
y = 1.03x + 0.75
R2 = 0.96
0
1
2
3
4
5
6
7
8
9
3 3.5 4 4.5 5 5.5 6 6.5 7
Saturated Injection Pressure (bar)
Eco
no
mis
er
Pre
ssu
re (
bar)
3 4 5 6 7
![Page 14: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/14.jpg)
Algorithm Implementation and Evaluation
• Algorithm Implementation
• Developed in LabVIEW
• Single Input, Single Output Control Loop
• Initial Determination of SIP from Compressor Suction Pressure
• Determination of Optimum Pressure from Appropriate Regression Equation
• Evaluation: UNECE ATP Standard (2003) – Class C Multi-Compartment
• 3 ATP Chamber Setpoints: -20,-20ºC; -10,-10ºC and 0,0ºC
• 3 Condensing Temperatures (for each setpoint): +18ºC, +22ºC, +25ºC
• Test Matrix:
![Page 15: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/15.jpg)
Box Capacity
0
2
4
6
8
10
12
Ca
pa
cit
y (
kW
)
IDX IDX IDX DX IDX IDX IDX DX IDX IDX IDX DX
(Cond) 18ºC 22ºC 25ºC 22ºC 18ºC 22ºC 25ºC 22ºC 18ºC 22ºC 25ºC 22ºC
(Box) (-20, -20ºC) (-10, -10ºC) (0, 0ºC)
4.17 4.07 3.81
5.34
5.93 5.9 5.79
7.11
8.58.17 7.83
9.66
Evaporator Capacity
0
2
4
6
8
10
12
Cap
acit
y (
kW
)
IDX IDX IDX DX IDX IDX IDX DX IDX IDX IDX DX
(Cond) 18ºC 22ºC 25ºC 22ºC 18ºC 22ºC 25ºC 22ºC 18ºC 22ºC 25ºC 22ºC
(Box) (-20, -20ºC) (-10, -10ºC) (0, 0ºC)
4.8 4.71 4.43
5.346.45 6.45 6.35
7.11
9.1 8.57 8.23
9.66
• IDX Box capacity varied between 76-84.5% of DX baseline
• IDX Chamber Capacity varied between 88-90% of DX baseline
•Capacity decreases as as condensing temperature is increased
Algorithm Evaluation: Capacity
![Page 16: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/16.jpg)
Algorithm Evaluation: COP
• IDX Box COP varied between 80-86% of DX baseline
• IDX Chamber COP varied between 65-74% of baseline
• Considerable reduction in IDX COP due to Additional HX, Temperature Glide and Liquid Secondary Pumps.
Box COP
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
CO
P
IDX IDX IDX DX IDX IDX IDX DX IDX IDX IDX DX
(Cond) 18ºC 22ºC 25ºC 22ºC 18ºC 22ºC 25ºC 22ºC 18ºC 22ºC 25ºC 22ºC
(Box) (-20, -20ºC) (-10, -10ºC) (0, 0ºC)
0.85 0.77
0.68
1.18 1.14
1.04 0.96
1.48 1.471.35 1.31
1.82
Evaporator COP
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
CO
P
IDX IDX IDX DX IDX IDX IDX DX IDX IDX IDX DX
(Cond) 18ºC 22ºC 25ºC 22ºC 18ºC 22ºC 25ºC 22ºC 18ºC 22ºC 25ºC 22ºC
(Box) (-20, -20ºC) (-10, -10ºC) (0, 0ºC)
1.050.94
0.86
1.184
1.37
1.27 1.16
1.48
1.75
1.53
1.44
1.82
![Page 17: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/17.jpg)
Comparison with Injection Ratio Strategy
• At -20,-20C pressure controlled evaporator capacity was within 4.5% of INJR controlled capacity
• At-10-10C and 0,0C the pressure controlled evaproator capacity was within 1.7% and 1.6% of the INJR controlled system.
• Similar increases in evaporator capacity.
• Increases in COP also evident for COP algorithm
Capacity
0
1
2
3
4
5
6
7
8
9
10
Cap
acit
y (
kW
)
IDX IDX IDX IDX IDX IDX IDX IDX IDX IDX IDX IDX
-20,-20ºC (cond +22C) -10,-10ºC (cond +22C) 0, 0ºC (cond +22C)
Box Box Evap Evap Box Box Evap Evap Box Box Evap Evap
Set. Alg. Alg. Set. Set. Alg. Alg. Set. Set. Alg. Alg. Set.
4.27 4.07
4.71 4.93
6.00 5.90 6.45
6.58
8.30 8.17
8.57 8.71
Coefficient of Performance
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
CO
P
IDX IDX IDX IDX IDX IDX IDX IDX IDX IDX IDX IDX
-20,-20ºC (cond +22C) -10,-10ºC (cond +22C) 0, 0ºC (cond +22C)
Box Box Evap Evap Box Box Evap Evap Box Box Evap Evap
Set. Alg. Alg. Set. Set. Alg. Alg. Set. Set. Alg. Alg. Set.
0.737 0.768
0.94 1.04
0.96 1.04
1.27 1.25 1.26
1.35
1.53 1.51
![Page 18: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/18.jpg)
5. Conclusions
Optimum Injection Pressures Exist for control and maximisation of:
Cooling CapacityCOPCompressor Power
Optimum injection pressures are dependent on setpoint conditions.
Two Optima exist for optimisation of COP
Optimisation under high capacity conditions
Optimisation under low compressor power conditions.
Pressure Control Algorithm provides comparable performance to INJR controlled system.
Pressure control algorithm can be used to maximise either capacity or COP, depending on the requirements
This control algorithm can be used as part of an economiser cycle to compensate for parasitic losses associated with increased pressure lift on indirect systems.
![Page 19: A Scroll Economiser Cycle for use in Multi-temperature ... SIRAC...A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport Refrigeration Systems. Shane Smyth, Donal](https://reader033.vdocuments.us/reader033/viewer/2022051722/5aa4d73b7f8b9a1d728c60c3/html5/thumbnails/19.jpg)
A Scroll Economiser Cycle for use in Multi-temperature Indirect Transport
Refrigeration Systems.
Shane Smyth, Donal P. Finn, Barry Brophy and David J. Timoney
School of Electrical, Electronic and Mechanical Engineering
University College Dublin, Ireland