a range of copper capillary soldering and brazing fittings
TRANSCRIPT
![Page 1: A range of copper capillary soldering and brazing fittings](https://reader034.vdocuments.us/reader034/viewer/2022052112/62887768af71a83caf16f857/html5/thumbnails/1.jpg)
• Available in sizes 6-54mm.
• Suitable for connecting copper tubes inaccordance with EN 1057.
• Designed for soldering and brazingapplication with the exception of unionfittings with copper tail, which cannot be brazed.
• Manufactured with copper and gunmetalwhich are immune to dezincification.
Features and Benefits:
A range of copper capillary soldering and brazing fittings.
Conex Delcop End Feed fittings (Silver brazing)
Size (mm)
Working Pressure (bar)-20° to 110°C 150°C 200°C
6 79.1 67.3 35.68 57.9 49.2 26.110 45.7 38.8 20.512 37.7 32.0 17.015 35.1 29.8 15.818 33.3 28.3 15.022 30.6 26.0 13.828 23.8 20.3 10.735 21.1 17.9 9.542 19.3 16.4 8.754 16.3 13.9 7.3
![Page 2: A range of copper capillary soldering and brazing fittings](https://reader034.vdocuments.us/reader034/viewer/2022052112/62887768af71a83caf16f857/html5/thumbnails/2.jpg)
Series 4000 RangeSlip Coupler
DC600From: 15mmTo: 54mm
Straight Coupler
DC601From: 6mmTo: 54mm
Reduced Coupler
DC601RFrom: 8 x 6mmTo: 54 x 42mm
Imperial to MetricAdaptor
DC601IMFrom: 1/2" x 15mmTo: 1" x 28mm
Tap Connector
DC601TCFrom: 15 x 1/2"To: 22 x 3/4"
45º Elbow
DC606From: 15mmTo: 54mm
90º Elbow
DC607From: 6mmTo: 54mm
Reduced Elbow
DC607RFrom: 22 x 15mmTo: 28 x 22mm
Slow Bend
DC607LTFrom: 10mmTo: 54mm
Bent Tap Connector
DC607TCFrom: 15 x 1/2"To: 22 x 3/4"
Tee - Equal
DC611From: 6mmTo: 54mm
Female Elbow
DC7073From: 15 x 1/2"To: 35 x1.1/4"
Tee- Reduced Branch
DC611RBFrom: 15 x15 x10mmTo: 54 x 54 x 42mm
Tee - Reduced End
DC611REFrom: 22 x 15 x 22mmTo: 42 x 28 x 42mm
Tee - Reduced End & Branch
DC611REBFrom: 15 x 10 x 10mmTo: 42 x 35 x 35mm
Tee - Reduced Both Ends
DC611REEFrom: 15 x 15 x 22mmTo: 28 x 28 x 35mm
End Cap
DC617From: 8mmTo: 54mm
Straight Union CopperTail
DC633
Size: 15mm
Straight Union Cone
DC633UAFrom: 22 x 1"To: 28 x 1"
Full Cross Over
DC636From: 15mmTo: 22mm
Part Cross Over
DC636AFrom: 15mmTo: 22mm
Return Bend
DC639From: 15mmTo: 22mm
Extended Elbow
DC640
Size: 22mm
Gas Meter Union
DC690MUFrom: 22 x 1"To: 28 x 1"
Air Vent Coupler
DC701DFrom: 15mmTo: 22mm
Female StraightConnector
DC703From: 15 x 1/2"To: 54 x 2"
Air Vent Elbow
DC705DFrom: 15mmTo: 22mm
Male Straight Connector
DC704From: 15 x 1/4"To: 54 x 2"
Female Wall PlateConnector
DC708From: 15 x 1/2"To: 15 x 1/2"
Tee - Reduced End
DC711
Size: 35 x 15 x 35mm
Pitcher Tee
DC711PFrom: 22mmTo: 54mm
Tee - with FemaleBranch
DC712From: 15 x 15 x 1/2"To: 35 x 35 x 1/2"
Tee with Female End
DC714From: 15 x 1/2" x 15To: 28 x 1/2" x 28
Air Vent Plug
DC716DFrom: 15mmTo: 15mm
Union Coupler
DC733From: 15mmTo: 35mm
Tank Connector
DC750AFrom: 15 x 1/2"To: 28 x 1"
Tank Connector
DC750BFrom: 15 x 1/2"To: 54 x 2"
Cleanout Fitting & Plug
DC816From: 35mmTo: 54mm
Cleanout Fitting & PLugFlush Fitting
DC816SFrom: 35 x 3/4"To: 54 1.1/2"
Fitting Reducer
DC6012From: 8 x 6mmTo: 54 x 42mm
Fitting Reducer
DC6012LFrom: 15 x 10mmTo: 15 x 10mm
Imperial to MetricAdaptor
DC6012MFrom: 3/4" x 22mmTo: 1" x 28mm
45º Street Elbow
DC6062From: 15mmTo: 54mm
Street Bend
DC6072From: 10mmTo: 54mm
Bent Union
DC60763From: 28 x1"To: 28 x1"
Wall Plate Elbow
DC70725From: 15 x 1/2"To: 22 x3/4"
*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: [email protected].
Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: [email protected] | Website: www.ibpgroup.com
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
06/13