winfer.skwinfer.sk › pdf › certifikaty › 2451-cpr-en1090-en.pdf · created date: 1/4/2016...
TRANSCRIPT
WffiilRrCERTI FICATEConformity of the Factory Production Control
245L-CPR- E N L 090- 2 0 L4.0232. 003ln compliance with Regulation 305/2011iEU of the
European Parliament and of the Council of 9 March 2011 (the Construction ProductsRegulation or CPR), this certificate applies to the following construction product:
Construction product Structural components and kits for steel structuresto EXC4 according to EN LO90-2
lntended use for load-bearing structures in all types of buildings
CE - marking method 2A.3.2 and 2A.3.4 acc, to EN 1090-1:2009+A1:2011
Range of production see reverse
produced by or for
Manufacturer WINFER Spol. S r.o.
Gastanovf rad 4L761259290L Dunajsk6 StredaSLOVAKIA
Manufacturing plant WINFER spol. s.r,o. LehniceProduction facility of the manufacturer C. d. 6 1 7
93037 LehniceSLOVAKIA
Confirmation This certificate attests that all provisions concerning theassessment and verification of constancy of performancedescribed in Annex ZA of the harmonised standard
EN 1090-L:2009+AL:2011under system 2+ are applied, and that the factory' production control fulfills all the prescribed requirementsstated therein.
Stad of validity 05.12.2072Date of issue,
NextSurveillance audit 04.72.20L8
Period of validity
Remarks
This certificate will remain valid as long as the test methodsand/or the factory production control requirements includedin the harmonised standard used to assess the performance of thedeclared characteristics do not change, and the product and themanufacturing conditions in the plant are not modified significantly.
see reverse
[*u^|,'LDipl.-lng. Gurschke
Head of certification body
Place and date of issue Dusseldorf, 02.72.2015Flegl
DVS ZERT GmbH, Aachener StraBe L72, 40223 Dirsseldorf, GERMANY, www.dvs-zert.de
( nattsrl D",r..n"AkkdiderungsttelleD,ZE,1@83-01{0
Ceftificate number:
Range of production
AssociatedWelding certificates
Remarks
E RT
2451-CPR-EN 1090-2014.0232.003
+ production (cutting - holing - forming, welding, mechanically connecting,corrosion protection)
SLVH a-EN 1090 -2.0007 L.20L2(SLV Hannover, next surveillance date 04.12.2016)
The Notified Body - 2451 DVS ZERT GmbH has performed the initial inspectionof the/of manufacturing plant(s) and of the factory production control andperforms the continuous surveillance, assessment and approval of the factoryproduction control.
General provisions
The conditions of the standard EN 1090-1:2009+41:2011, from section B. 4.1 until including section B. 4.4,must be fulfilled.
The requirements of EN 1090-1:2009 + A1: 2011, section B. 4.3 are observed. These refer to the annualstatements to be submitted in writing of the manufacturerto the Notified Body.
The General Terms and Conditions of the DVS ZERT GmbH apply in the currently valid version.
(onns\ &us.h"
AkHit€rumsclleDVS ZERT GmbH, Aachener StraBe I72, 40223 Dirsseldorf, GERMANY, www.dvs-zert.de