a part-145 approval - s7...
TRANSCRIPT
Karl SPECHT
Maintenance Organisation Oversight Section Manager Flight Standards Directorate
2018(D)54513 ksp/gfe/FSl Cologne, 16.11.2018
The Quality Manager S7 ENGINEERING 6/1 DOMODEDOVO AIRPORT ESTATE MOSCOW REGION, 142015 RUSSIAN FEDERATION
Subject: Change to EASA Part-145 approval certificate
Reference: FS 06/Rev 0/EASA.145.0130
Enclosure: EASA Part-145 approval certificate
Dear Sir or Madam,
Following a positive recommendation for a Part-145 approval from DGAC-F for:
S7 ENGINEERING
The European Aviation Safety Agency hereby encloses your EASA Part-145 approval certificate reference:
EASA.145.0130
This certificate supersedes the EASA.145.0130 approval certificate dated 18 September 2018. The superseded certificate shall be destroyed locally by your organisation and does not need to be returned to the EASA.
Karl SPECHT
Cc: DGAC-F
Certification and Approval Support Department, EASA
4 4 tr
* * * * it 4
Postal address: Postfach 10 12 53, 50452 Cologne, Germany Visiting Address: Konrad-Adenauer-Ufer 3 50668 Cologne, Germany
An agency of the European Union
Tel.: +49 221 8999 4151 E-mail: [email protected] Web: www.easa.europa.eu ISO 9001 Certified TE.GEN.00101-005
a Ao® , ---- Page 1 of 3
MAINTENANCE ORGANISATION APPROVAL CERTIFICATE
Reference: EASA.145.0130
Pursuant to Regulation (EC) N° 216/2008 of the European Parliament and of the Council and to Commission Regulation (EU) N1321/2014 for the time being in force and subject to the conditions specified below, the Agency hereby certifies:
S7 ENGINEERING 6/1 DOMODEDOVO AIRPORT ESTATE 142015 MOSCOW MOSCOW REGION RUSSIAN FEDERATION
71 A KNYSHEVKOGO STREET 357202 MINERALNYE VODY RUSSIAN FEDERATION
as a maintenance organisation in compliance with Section A of Annex II (Part-145) of Regulation (EU) N° 1321/2014, approved to maintain the products, parts and appliances listed in the attached approval schedule and issue related certificates of release to service using the above references.
CONDITIONS:
1. This approval is limited to that specified in the scope of work section of the approved maintenance organisation exposition as referred to in Section A of Annex II (Part-145), and
2. This approval requires compliance with the procedures specified in the approved maintenance organisation exposition, and
3. This approval is valid whilst the approved maintenance organisation remains in compliance with Annex II (Part-145) of Regulation (EU) N° 1321/2014.
4. Subject to compliance with the foregoing conditions, this approval shall remain valid for an unlimited duration unless the approval has previously been surrendered, superseded, suspended or revoked.
Date of original issue: 16 Mar 2006
Date of this revisit&in: 16 Nov 2018 P
Revision N°: 9
Signed:
For the Agency
EASA Form 3-145 Issue 3
Page 2 of 3
MAINTENANCE ORGANISATION APPROVAL SCHEDULE
Reference: EASA.145.0130 Organisation:
6/1 DOMODEDOVO AIRPORT ESTATE 142015 MOSCOW REGION RUSSIAN FEDERATION
S7 ENGINEERING 71 A KNYSHEVKOGO STREET 357202 MINERALNYE VODY RUSSIAN FEDERATION
CLASS RATING LIMITATION BASE LINE AIRCRAFT Al Aeroplanes Airbus A318/A319/A320/A321 YES YES
above 5700kg Boeing 737-300/400/500 YES YES Boeing 737-600/700/800/900 YES YES Boeing 737-7/8/9 NO YES Boeing 757-200/300 NO YES Boeing 767-200/300/400 YES YES Embraer ERJ-170 Series YES YES
CLASS RATING LIMITATION ENGINES Bl Turbine CFM56-3 Series
CFM5S6-5B Series CFM56-7B Series
CLASS RATING LIMITATION COMPONENTS C3 Communication and Nav Components in accordance with the Capability OTHER THAN C4 Doors and Hatches List defined in the Company MOE. COMPLETE CS Electrical Power & Lights ENGINES C6 Equipment OR APUs C7 Engine and APU
C8 Flight Controls C14 Landing Gear ClS Oxygen C17 Pneumatic and vacuum C18 Protection ice/rain/fire C20 Structural
EASA Form 3- 145 Issue 3
Page 3 of 3
MAINTENANCE ORGANISATION APPROVAL SCHEDULE
Reference: EASA.145.0130 Organisation: S7 ENGINEERING
6/1 DOMODEDOVO AIRPORT ESTATE 71 A KNYSHEVKOGO STREET 142015 MOSCOW REGION RUSSIAN FEDERATION
357202 MINERALNYE VODY RUSSIAN FEDERATION
SPECIALISED 01 Non Destructive Testing Eddy Current Inspection SERVICES Liquid Penetrant Inspection
Magnetic Particle Inspection Radiography Inspection Thermography Inspection Ultrasonic Inspection
This approval schedule is limited to those products, parts and appliances and to the activities specified in the scope of work section of the approved maintenance organisation exposition,
Maintenance Organisation Exposition Reference: --
Date of original issue: 16 Mar 2006
Signed:
n approved: 01 Oct 2018 Issue N: 6 Revision N°: 2
For the Agency
EASA Form 3- 145 Issue 3