a nightmare for workers: appalling conditions in toy factories … · 2019. 3. 6. · a nightmare...

A Nightmare for Workers: Appalling Conditions in Toy Factories Persist

1


2

TABLE OF CONTENTS Executive Summary ...................................................................................................................... 3

Current Situation of Female Workers in the Toys Industry .................................................... 8

Women’s Rights at Wah Tung Toy factory .............................................................................. 10

Women’s Rights at Jetta Toy Factory ....................................................................................... 15

Wah Tung (He Yuan) Toy Manufacturing Ltd. Co. Investigative Report ............................ 19

Lovable Products (Hong Kong) Ltd. Investigative Report ..................................................... 62

Jetta (Guangzhou) Industries Co., Ltd. Investigative Report ................................................ 93

Herald Metal & Plastic Works Ltd. Investigative Report .................................................... 135

Information Disclosure Request .............................................................................................. 173

Factory Working Conditions Comparison Charts ................................................................ 174

Jetta (Guangzhou) Industries 2015 vs 2018 Working Conditions Comparison Chart............ 174

Dongguan Qualidux 2017 vs 2018 Working Conditions Comparison Chart ......................... 180

Dongguan ChangAn Mattel 2017 vs 2018 Working Conditions Comparison Chart ............. 183

Winson Precision 2017 vs 2018 Working Conditions Comparison Chart ............................. 185


3

Executive Summary

To this day, most toys are made in China. They are the source of children’s dreams all over the world.

However the process through which these dreams are created remains a nightmare. Countless hours of

overtime, contact with dangerous chemicals and poor wages barely enough to live on are some of the

biggest problems. This report reveals violations found in nine factories that produce, among others, for

the biggest toy brands Hasbro, Disney, and Mattel but also for German manufacturers such as Simba

Dickie, Schleich and Ravensburger1. These products are sold at Walmart, Costco, Target and other

retailers. We released detailed reports on four factories. The report identifies the causes of poor working

conditions and calls on multinational companies to take responsibility in their production facilities to

combat this exploitation.

Serious violations that endanger workers

To highlight the poor working conditions of the factory workers China Labor Watch dispatched

undercover investigators into four factories between April and September this year: Dongguan Lovable

Toy Products Ltd., Dongguan Herald Metal and Plastic Works Ltd., Jetta (Guangzhou) Industries Co.

Ltd., Wah Tung (He Yuan) Toy Products Ltd. Co. The investigation revealed 23 rights violations, and the

most severe rights violations are highlighted below:

During peak production season, workers put in 80 to 175 overtime hours per month despite

Chinese labor law stipulating that overtime hours are not to exceed 36 hours a month.

Workers did not take part in the legally mandated 24 hours of pre-job safety training which

should cover any toxic substances they may come into contact with, in addition to the safe

operation of machinery. Without the necessary training, workers are unaware of the toxic

chemicals they come into contact with, and protective measures to take.

Workers may come into contact with toxic chemicals, or work in environments with a high level

of noise and dust, but are not provided with the necessary protective equipment.

Lack of a pre-job physical examination. Without a physical examination, it would be difficult for

workers to prove that an occupational disease resulted from working at the factory.

Workers were made to sign blank contracts, which were not explained, and did not receive a copy

of the contract.

Poor living conditions. The factory dormitory houses 8 workers to a room, and some showers did

not have hot water.

Failure to purchase social insurance in accordance with the law. Chinese Labor Law requires

employers to purchase social insurance and the housing provident fund for workers in accordance

to a set contribution rate.

Lack of independent unions which represent workers’ interests.

Lack of effective grievance channels. When workers face issues at work, they choose to resign or

endure the difficulties.

Differences in working conditions between the factories

As part of the Chinese economy is heavily based on manual labor, excessive working hours are an

inherent problem, and the issue is present in all factories. However, there were disparities in the working

hours between the four factories. Wah Tung has the most extreme conditions with up to 175 hours per

month and only one single rest day in August. If the assembly line adjusts to producing a new product

1 The nine factories are Wah Tung (He Yuan) Toy Manufacturing Ltd., Lovable Products (Hong Kong) Ltd., Jetta

(Guangzhou) Industries, Herald Metal and Plastic Works Ltd., Jetta (Panyu), Jetta (Conghua), Dongguan Qualidux

(Guangda) Plastic Products Ltd., Co., Dongguan ChangAn Mattel Second Factory, Shenzhen Winson Precision.


4

resulting in workers having to work overtime to meet the production quota, wages will not be paid for the

overtime hours put in. Workers are to continue working until the quota is fulfilled. During peak season,

break times are partly shortened and the workers clock out at 21:30, but continue working afterwards.

Furthermore, at Lovable, 104 overtime hours were accumulated over the month, Herald demands 96

hours per month and at Jetta, up to 80 hours. These conditions are intolerable: Chinese labor law

stipulates a maximum of 36 overtime hours per month.

The calculation of wages in the factories is often incomprehensible for workers because of its complexity.

It consists of a basic wage (usually equivalent to the minimum wage), overtime hours, and many other

deductions and subsidies. The NGO Worker Empowerment calculated in 2017 that a living wage for a

household in Guangdong province is between 6900 RMB ($991.85 USD) and 7500 RMB ($1078.10

USD). Assuming a household with two income earning adults, a worker would need to earn at least 3450

RMB ($495.97 USD) to 3750 RMB ($539.05 USD) per month as a minimum wage. Unfortunately, the

reality is quite different. During off-peak season, workers’ monthly wages close to the base wage, which

is 2100 RMB ($301.87 USD) at Jetta, 1800 RMB ($258.74 USD) at Herald and 1720 RMB ($247.24

USD) at Lovable. At Wah Tung, workers earn around 2,000 RMB ($287.49 USD) during the off-peak

season. These wages are well below what is required to maintain a decent standard of living. As such,

during peak season, workers have no choice but to put in excessive overtime to earn a living wage. At

Wah Tung workers receive on average between 3000 and 4500 RMB ($431.24 – $646.86 USD), at

Lovable 4000 RMB ($574.99 USD), at Herald 3500 RMB ($503.11 USD) and at Jetta 2900 to 3500 RMB

($416.86 – $503.11 USD). If we calculate the living costs according to a household with two income

earning adults, they can only earn a living if they both work overtime. However, a living wage should, by

definition, be attainable in the normal working week by just one person of the household.

In addition to wages and overtime, living conditions and occupational safety are important issues and

once again, there were differences between the factories. At Wah Tung and Lovable, 8 to 10 workers are

squeezed into barren dormitories. With Jetta and Herald, only 2 to 4 workers share a room. There is no

warm water in the showers and this has to be carried in large buckets by the workers.

Occupational safety is a problem. The injection molding workshops are extremely noisy. Thinners,

solvents and glues are used, and the strong smells emitted from these substances irritates the nose and the

skin. The workers do not understand how toxic the chemicals are and toxic fumes can also be produced

when melting plastic. Machines are also operated without clear safety instructions and protection, which

repeatedly leads to serious accidents. Safety training and regular health checks are therefore crucial,

however, neither Wah Tung, Lovable nor Herald informed workers of any safety procedures and did not

provide adequate protective clothing. Only Jetta placed value on workers’ occupational safety and health.

Why do these violations continue?

The reason why the rights and interests of Chinese workers have not improved is threefold.

1) Price pressure by multinational companies

International brand companies are not accepting responsibility for the rights abuses in their supply chain.

Brand companies play an active role in the exploitation of workers. To meet their targets, they contribute

actively by using short term contracts with a fierce price competition, and changing orders on a very short

term basis.

Every year many companies will request toy factories to increase their production quotas while

decreasing the costs of production. For example, in one year, the production costs for 100 Hasbro and

Mattel toys would be $100 USD. However, in the following year, to produce the same toy, Hasbro and


5

Mattel require the factory to make 105 or more toys for $100 USD. For the same product, the brand

companies will find two or three toy factories to compete in acquiring orders and the factory which has

the lowest cost of production will receive the most orders. Under these circumstances, if factories are

unable to decrease the cost of the materials used in the manufacturing process, they will have no choice

but to place the burden of lowering the costs of production on the backs of Chinese workers.

At the Wah Tung factory, a worker producing Disney’s Princess Sing and Sparkle Ariel Doll, has a

production quota of around 1,800 – 2,500 toys a day, works 26 days a month and earns approximately

3000 RMB (435.43$ USD) a month. For each doll they produce, the worker receives $0.01 USD.

Currently, the Disney’s Sing and Sparkle Ariel doll retails at $34.99 on Amazon. A worker at Wah Tung

only earns 0.031% of the market value of the toy they produce. Several workers in the manufacturing and

packaging departments are working on the Disney’s Princess Sing and Sparkle Ariel Doll. Accordingly,

around 75 cents from the retail price of each doll goes towards the wages of workers.

2) Repression against workers, a competitive advantage

Although labor costs in China have increased, the lack of workers’ rights and interests being fully

protected can also be interpreted as a competitive advantage of the toy industry in China. In countries

such as Vietnam, India and Indonesia, workers have the right to strike over unfair labor conditions. In

China, workers do not have the right to strike and the possibilities for mobilizing for decent working

conditions are severely limited. Although this has not prevented strikes from breaking out over the years, they were, however, mostly harshly repressed.

The unions established in Chinese factories do not serve any real purpose. The Chinese government is

promoting the establishment of factory-level unions, but they are affiliated with the All-China Federation

of Trade Unions (ACFTU) which is essentially an arm of the Chinese party and therefore upholds the

interests of the government and does not truly represent the labor force. There are presently many

factories which do have unions. However, many management level employees, such as staff from the

human resources office, also manage the factory unions. Furthermore, factory management also appoints

the union leaders. As union leaders are not elected by factory workers, the union fails to represent the

interests of workers, and it is difficult to defend workers’ rights. Without free and independent unions,

and effective complaint mechanisms, it is impossible to ensure workers’ rights are protected.

3) Recurring violations of applicable law

China labor law has many regulations, but factories will make attempts to circumvent or knowingly

violate the law. Factories fail to adhere to labor laws, as the costs associated with violating such laws is

low. For example, Chinese labor law has a regulation that workers’ overtime hours must be limited to 36

hours per month. However factories often make workers put in more than 80 hours of overtime. Some

factories will request the local government to implement a comprehensive working hour system and in

this way, factories can legally evade the overtime law and assign workers up to 432 overtime hours per

year. Though since there is no punishment for violating the law related to overtime hours, many factories

do not even apply for the comprehensive working hour system. Furthermore, Chinese law stipulates that

factories should purchase retirement insurance and the housing provident fund for workers, according to

their gross wages. Although the situation has improved slightly since the Chinese government put a focus

on this issue due to an aging labor force, many factories still fail to purchase social insurance in

accordance with the law. For factories who do purchase social insurance for workers, contributions are

calculated according to workers’ base wages and workers will realistically lose out on half of their

benefits. Workers who migrate to another province have to work there for a significant number of years

before having the right to collect retirement benefits. As such, if a factory closes or a worker wishes to

change jobs and relocate to another province, they will be unable to claim retirement benefits. Because


6

the turnover rate of workers is so high, it is relatively difficult for workers who have resigned to hold the

factory accountable for any salary discrepancies.

Chinese law regulates that there are limits on employing student workers and dispatch workers. As an

example, student workers shall not work more than 8 hours a day and can only work in fields relevant to

their major. However, student workers tend to do work similar to regular workers. During peak season,

the number of dispatch workers often exceeds the 10% allowed according to Chinese law. Dispatch

workers are more vulnerable to exploitation as they sign contracts with the agencies, and any grievances

or disputes are handled by the agency. Dispatch workers generally receive lower wages and agencies

usually do not make contributions to workers’ social insurance. Another requirement of the Chinese law

stipulates that employers have to provide pre-job training, which includes group, workshop and factory

level training in addition to safety training before using new materials or machines. The “Special Rules on

the Labor Protection of Female Employees” was enacted to protect female workers’ rights such as

prohibiting workers who have been pregnant for more than seven months from working night shifts or in

extended working hours. Despite these laws, many are rarely enforced. Litigation costs are too high for

workers, and therefore, workers generally do not sue factories for their illegal conduct.

Conclusion

CLW has conducted investigations into toy factories for almost 20 years, however, this year’s

investigation reveals once again the persistent issues in the toy industry in China. Brand companies still

look to maximize profits, and do so by pitting factories against each other for the lowest production cost,

which ultimately leads to the exploitation of workers.

We call upon the brand companies who source from these factories to make a genuine commitment to

improving working conditions, and address the rampant rights violations in the toy industry. Workers

have, for many years, contributed to the profits of companies make, but continue to toil in factories that

blatantly violate their rights and interests. There is a need for serious changes in not only the purchasing

model of the brand companies, but also the approach they take when working with their suppliers in

ensuring that workers’ rights are protected.

Summary of Rights Violations

Wah Tung (He

Yuan) Toy

Products Ltd. Co.

Jetta (Guangzhou)

Industries Co., Ltd.

Lovable

Products

(Hong Kong)

Ltd.

Herald Metal

& Plastic

Works Ltd.

Hiring Discrimination*

x

Pre-job physical

examination not provided to

all workers

x

x

Overtime is not voluntary* x

Excessive overtime work* x x x x

Factory mistreats workers x x


7

Factory does not explain

the labor contract to

workers

x

x x

Factory does not uphold the

labor contract*

x

x x

Factory does not provide 24

hours of pre-job safety

training *

x x x x

Factory does not provide

workers with protective

equipment*

x x

Factory lacks sufficient

occupational health and

safety measures*

x

x x

Poor living conditions x x

Fire hazards present in

factory workshops*

x

Failure to purchase social

insurance in accordance

with the law*

x

Lack of independent unions x x x x

Lack of effective complaint

channels

x x x x

Worker must obtain

approval for resignation

x

Workers’ personal IDs

detained

x

Workers do not receive a

copy of the contract

x

x

Blank contracts signed

x x

Low wages (workers’

wages within 5% of local

minimum wage)

x x x

Unpaid work hours x

x

NOTE: “*” represents a violation of Chinese labor law


8

Current Situation of Female Workers in the Toys Industry

China’s economy has stepped into a “new normal” phase, in which production costs are growing and the

manufacturing sector continues to face difficulties. Trump’s trade war further intensifies this conflict. To

survive, Chinese companies have shifted the pressure of rising costs to workers. There have been many

violations of labor rights and interests in the recent years. Chinese female workers, being the main labor

force of China's toy manufacturing industry suffer from worsening living conditions because of their

physical characteristics and family responsibilities. After investigating the two toy factories Wah Tung

(Heyuan) Toys Products Co., Ltd and Jetta (Guangzhou) Industries Co., Ltd., China Labor Watch is able

to portray the current situation of Chinese toy factory female workers from the following aspects.

Unequal employment opportunities. Among the management level of both toy factories, the number of

women is extremely low - only one or two are women, and those who have the right to speak or lead are

commonly men. However, female workers make up 80% of regular workers. Most female workers choose

this job just because of their old age and low education level. Toy factories are more willing to recruit

female workers, since they show obedience, prioritize children and family, and are less likely to cause

trouble. In addition, there are also cases of recruitment discrimination for pregnant women. According to

Article 3 of “Regulations Concerning the Labor Protection of Female Staff and Workers,” employers

must not refuse to employ female staff and workers for any position which is suitable for women. Jetta

did not run tests on whether the type of work or position is suitable to women. They simply excluded

women who are pregnant or about to become pregnant from their hiring list, since they are unable to

provide results from a chest x-ray test.

No work-life balance. Both factories have overtime of more than 70 hours each month. If workers

chooses not to work overtime, it is hard for them to make a living with the base wage of 2000 RMB

($287.49 USD). In addition, China’s traditional culture places family responsibilities on women.

According to Article 5 of “Special Rules on the Labor Protection of Female Employees,” no employer

shall reduce the wages, dismiss, or rescind the labor or employment contract of a female employee due to

pregnancy, childbirth or breast feeding. Article 61 of Labor Law states that it is forbidden to prolong the

work hours of women workers who are seven months pregnant or ask them to work night shifts.

However, in practice, if female workers apply for leave due to special circumstances such as taking care

of a child, menstrual period, or pregnancy, they will be disqualified from working overtime or be

transferred to a more tiring position which forces them to resign.

Poor living conditions. According to Article 10 of “Special Rules on the Labor Protection of Female

Employees,” employers with a relatively large number of female employees shall, based on their demand,

establish facilities such as clinics for female employees, lounges for pregnant women, breastfeeding

rooms, etc. They shall also properly resolve the physiological, health, and breastfeeding difficulties

encountered by their female employees. However, in reality, not only are there no facilities especially

designed to accommodate women, but basic living conditions are also not guaranteed. The hygiene

condition of the bathroom in Wah Tung workshop is poor and has a foul odor. If workers leave to use the

bathroom too frequently during work hours, the line leader will criticize them. Regular workers’

dormitory houses 8-10 people in a room, and it is inconvenient for women to take a shower as no hot

water is available in the room. Female workers need to take a bucket to fill up hot water from the corridor.

Insufficient social insurance. According to Article 8 of “Special Rules on the Labor Protection of Female

Employees,” the medical expenses for the childbirth or miscarriage of female employees who have

participated in maternity insurance shall be paid by the maternity insurance fund on the basis of the

prescribed maternity insurance items and standards; and the medical expenses for those female employees

who have not participated in maternity insurance shall be paid by the employers. But for the factories,

contributing to social insurance is an extra cost to them. Most of the factories only contribute according to


9

the minimum wage limit. Even if the factories contribute to workers’ social insurance, they only

contribute to three types of social insurance which does not include maternity insurance for female

workers.

Rights are not protected by the Labor Union. Even though female workers are living in a harsh

environment, the female workers from both factories said there are no grievance channels for them to

report or solve existing problems. So they are left with no choice but to endure these difficulties or resign

from work. Labor union in factories exists, but they do not actually operate and calls made to the workers

hotline did not go through.


10

Women’s Rights at Wah Tung Toy factory

1. Employment opportunities

There is a huge disparity in employment opportunities between men and women at Wah Tung (Heyuan)

Toys Products Co., Ltd. There are 36 regular workers in the assembly line where the investigator worked,

5 of which are men and the rest are women. Female workers make up around 80% of all regular workers.

In comparison, as for management, all nine line leaders in the workshop where the investigator worked

are male. The supervisors, product technicians, and other managements are male and only the office

clerks are female. The proportion of female in management is 1/9.

Workers rests at their work station

The reason behind this phenomenon is probably related to the nature of production. Compared with work

that requires manual labor such as lifting bricks at construction sites, producing toys demands less

physical labor with lower payment. Female workers are more likely to choose this kind of work because

they are generally older (most are over 45 years old), poorly educated, well-behaved, obedient, and care

more about children and family. Factories are also more willing to recruit female workers, since they are

less likely to make trouble and easier to manage. The wage and work intensity are the same for both male

workers and female workers on the assembly line.

2. Work-life balance

It is difficult for female workers to maintain a work and life balance when working at Wah Tung. Most of

the female workers interviewed said that they have the responsibility to take care of their family. For


11

example, they need to look after the elderly and their children every day, or need to earn money to buy a

house for their son. There are even cases where female workers take on all responsibilities of the family

whilst their husband stays at home and does nothing. However, because of the long working hours,

female workers are not able to take care of everything. More than 60% of female workers live near the

factory. If both parents work, the elderly will take care of their children. Some of the female workers said

that they had considered looking for other jobs, however, due to their low level of education, concerns of

being unemployed, and scarce job opportunities available, it is very difficult for them to resign from Wah

Tung.

Workers eating lunch outside the factory

3. Working hours and wages

Although new workers sign a labor contract when they are recruited, it is only used to pass factory

inspections. Workers cannot get a copy of the labor contract and their rights, as stipulated in the labor

contract, are not protected. Most workers interviewed do not know the details of the labor contract.

Wah Tung’s work hours and wages are in clear violation of terms in the labor contract and labor

laws. During peak season, workers need to work 10 to 13 hours a day, 26 to 29 days a month. If a worker

requests leave during overtime work, they can only earn a daily salary of 7.5 RMB ($1.08 USD) per hour,

causing their monthly wage to be less than 2,000 RMB ($287.49 USD). Workers, therefore, must choose

to work overtime. If the overtime is caused by some external reasons (such as an adjustment in production

procedures), no additional wages will be paid. During peak season workers need to continue to work after

clocking out, with no extra wages given for the additional work. Meetings are unpaid.


12

A worker keeps a record of their wages in a notebook

Wah Tung’s leave request procedure is complicated and strict. Requests for leave made via phone calls or

text message will not be approved. Workers must submit a written request for leave, and as such, workers

must go to the workshop in person despite being sick or injured to receive the approval of the line leader

in order for sick leave to be approved. There are no wages for leaves and holidays. If the leave request is

not approved, the leave will be recorded as an absence and workers will receive a deduction to their

wages. For example, a female worker had a car accident and was injured on the way to work did not

receive a reply after sending a Wechat message to the line leader to request leave. As such, she had no

choice but to personally go to the workshop to request a day off. Leave is unpaid.

The long working hours and strict procedures when requesting for leave prevent female workers from

receiving adequate rest. Female workers are not paid if they ask for leave during their monthly periods.

During the investigation, there was a female worker in the factory who was 7 or 8 months pregnant;

however, her work hours and work intensity was the same as other regular workers, and she was not paid

when she was on leave. According to Article 61 of the Labor Law, female workers who have been

pregnant for more than 7 months are not allowed to have their work hours extended or work night shifts.

4. Working and Living Conditions

Workers at Wah Tung who work in positions that are exposed to hazardous substances do not receive an

occupational disease examination when working in the factory and after resigning from the factory. There

are sometimes problems with the machines and equipment, however, the factory does not conduct regular

checks on them.

The bathroom in the workshop is dirty, and there are odors in the area surrounding the bathroom. If a

worker goes to the bathroom too often during work, she will be criticized by the line leader. There are

around 8 to 10 workers living in one dormitory room with no hot water provided. Bathing is very

inconvenient for female workers as they can only pick up water in the corridors using a bucket.


13

Dormitory balcony

No cases of sexual harassment were discovered at the factory during the investigation period. Male

workers and female workers’ dormitories are in the same building. Female workers live on the 2nd, 3rd,

and 4th floors; male workers live on the 5th and 6th floors. The management dormitories are on various

floors with most management staff being male. The investigator did not hear of any safety concerns when

female workers were on the way to and from work. However, due to the relatively remote location,

inconvenient public transportation, and older men who lingered around the factory sometimes,

investigator was too afraid to go out alone after dark. The workshop bathroom is simple but relatively

safe.

Workers purchasing food outside the factory


14

5. Social Insurance

Workers under the age of 45 are not allowed to purchase social insurance. Workers also said that they are

reluctant to buy social insurance because their wages are low. Therefore, pregnant female workers or

unemployed female workers do not receive the benefits of having maternity or unemployment insurance.

The leave request procedures are the same for male workers and female workers. Workers need to submit

a written request for leave and hand it to the line leader in person. There is no maternity leave for

pregnant workers and if they choose to resign or leave, they will not receive their wages. If workers have

an emergency at home, such as taking care of a child, leave would still be unpaid. If a worker wants to

resign, the procedure is complicated and they would need to write a resignation at least one month in

advance and ask the line leader to sign. If workers leave without going through the required procedures,

they would not receive their last month’s salary.

6. Labor Union and Workers Representative

No labor union or worker representatives were found at Wah Tung. Most workers choose to endure the

difficulties or just quit when they encounter problems at work.

Workers on the production line


15

Women’s Rights at Jetta Toy Factory

1. Employment opportunities

There are disparities in employment opportunities between men and women at Jetta (Guangzhou)

Industries Co., Ltd.. Female workers make up 80% of the approximately 4,000 workers at the factory. The

majority of the workers are aged between 30-45 years old and the male to female ratio is 1:8. The reason

behind this phenomenon is because female workers easier to manage because most of them are poorly

educated, well-behaved, as well as children and family-oriented.

Workers on the way to work

According to Article 22 of “Law of the People’s Republic of China on the Protection of Rights and

Interests of Women,” when an entity employs a woman, it shall sign a labor (employment) contract or

service agreement with her. This labor (employment) contract or service agreement shall not contain

restrictions on marriage and childbearing. Jetta does not undergo assessments of whether the positions of

regular workers have the risk of occupational diseases. Instead, the factory requests applicants to submit

results of their physical examination regardless of the job position they apply for, which includes a chest

x-ray. As they are worried that it may affect the fetus, females who are pregnant or about to become

pregnant prefer not to undergo chest x-rays. Therefore, they are unable to receive the results of their

physical examination and will not be hired by the factory. Workers who failed to submit results of their

physical examination will not be hired by the factory.

2. Working Hours and Wages

Workers need to work overtime during peak season. They work overtime for 1.5 to 2.5 hours a day on

normal days and one full day on Saturday. On average, workers worked overtime for 66.5 to 78.25 hours

in one month. Workers barely make 2,000 RMB ($287.49 USD) if they refuse to work overtime, which is

insufficient in maintaining a basic standard of living. If workers work overtime during peak season, they

can earn between 2,900 to 3,500 RMB ($416.86 – $503.11 USD) a month.


16

The factory has paid annual leave, maternity leave, marriage leave and funeral leave. Maternity leave is

paid according to related laws. Workers must provide advanced notice to product management staff prior

to taking leave, and also ask for a leave request form.

The factory will not arrange overtime for female workers who are pregnant. If workers do not work

overtime, then they may have their overtime hours cancelled on workdays and Saturdays, or be asked to

resign. There was a female worker who had a stomach ache for two days straight during her period. After

applying for leave with the production manager, she was asked to resign.

Exhausted workers sleeping during their break

3. Social Insurance and Benefits

The factory purchases social insurance for workers, which includes pension, unemployment, medical,

work injury, maternity, and housing provident fund. However, workers are unsure of the actual amount

paid for work injury and maternity insurance because the factory pays for both.

The factory has many recreational facilities. There is an indoor gymnasium, an outdoor basketball court,

soccer field, dance studio and more. There are also activities such as a mobile game competition. The

majority of workers who utilize these facilities are predominantly male workers and summer workers.

Occasionally there are a few female workers who would dance in the dance studio.

4. Work safety and stability

The factory ventilation is very good. The oil and glue that workers come into contact with have been

tested previously and are harmless to the body. Every year, the factory pays for workers to undergo a

physical examination. Workers can only resign from the factory when it is determined that they do not

have an occupational disease. Some female workers who suffer from high blood pressure or anemia have

fainted on the assembly line due to the high level of work intensity. Last year, there was a female worker

who was talking to the worker next to her, and as she was not concentrating, her finger was cut by the

machine. Her finger had become disabled, and the factory compensated the worker 30,000 RMB

($4312.39 USD) in the end.


17

Workers on the way to the factory

5. Living and Working environment

The dormitory conditions at Jetta are poor. There is no individual shower room and bathroom in each

dormitory room. Showers and bathrooms are shared by workers on each floor. Since there is no hot water

and the cold water is very dirty in the shower room, workers have to fill a bucket of hot water and take it

outside, which is especially inconvenient for female workers.

6. Work-Life Balance

It is hard for female workers to maintain a work life balance when working at Jetta because the work

hours are long and the wages are low. For example, a female worker from the electronics department was

directly recruited into the factory in June. The worker is married and has two children. Since she and her

husband are both working in Guangzhou, their children have to be looked after by the grandparents.

7. Labor Union and Workers Representative

The employee service board at Jetta has a chart with the worker representatives and a union committee

chart. Of the 12 worker representatives, there is one male representative and the rest are females. The

male to female ratio is 1:11. The union committee has 11 individuals, and the chairman and vice chairman

are male. The two production committee members and one organizational committee member are male.

The recreational committee has one male and one female, and the remaining two committee members and

the two finance committee members are female. The male to female ratio is 6:5. However, when the

union’s phone number was dialed, the response suggested that the number was currently unavailable. The

working hours of the worker’s hotline overlaps with the workers’ overtime hours so they are unable to

provide suggestions.

There were two workshop managers in the Hasbro A7 production workshop that the investigator was

working in. The male manager is the supervisor, and the female manager is the deputy supervisor.


18

Workers mentioned that if there are any issues, they speak directly to the male manager, as he has more

decision-making power.

Workers lining up to swipe into work


19

Wah Tung (He Yuan) Toy Manufacturing Ltd. Co.

Investigative Report Company Profile

Wah Tung (He Yuan) Toy Manufacturing Ltd. Co. is a private enterprise specializing in the raw material

and processing industries. Wah Tung primarily manufactures and sells plastic electronics, electronic toys,

cosmetic toys, plastic dolls, toy apparel, plastic products, Christmas lights among other products. 100% of

products are exported. Products are primarily sold in the United States, Japan, South Korea, European

countries, and others. After registering with the national business administration bureau, the company

became a formal company in December 28, 2001. The company had a registered capital of 35 million

Hong Kong dollars. The company is located in the Private Industrial Park inside the Gaotang Village of

Yuancheng District, Heyuan City.

Basic Information2

Factory Name: Wah Tung (He Yuan) Toy Products Ltd. Co.

Address: Gaotang Industrial Park, Heyuan City, Guangdong Province

Contact Information: 0762-3268980, Ms. Deng

Main Products: Plastic toys, electronic toys, makeup toys, plastic dolls, toy accessories, other products

Brand companies manufacturing at Wah Tung: K-mart, Jakks Pacific, Disney, Target, Smoby, Simba

Dickie, Shimmer & Shine dolls

Number of regular workers: Approximately 2,000 (female workers make up 80% of the total worker

population)

2 The following information was sourced from Wah Tung’s company website as well as provided by co-workers.


20

Number of workers during peak season: Approximately 2,300 workers (including summer workers)

Male to female ratio at management level: 8:1

Number of interviewed workers: 16

Department interviewed workers were located in: Packaging/manufacturing department

Male to female ratio of interviewees: 5:9

Interview methods: face-to-face interviews, QQ/WeChat conversations, online conversations

List of Brands

Target

Perfectly Cute My Sweet Baby dolls


21

Boxes of Disney Princess Sing & Sparkle Ariel Bath Dolls

Smoby by Simba Dickie Group

Boxes of Disney Princess Beauty Bag and Frozen Beauty Bag


22

Simba by Simba Dickie Group

Boxes of Fireman Sam Neptune Speed Boat


23

Stanley Jr. Mega Tool Set

Shimmer & Shine dolls


24

Shimmer & Shine dolls (photo taken from manufacturing factory)

Supplier Guiding Principles

The Coca-Cola Company


25

Kmart Australia & Target Australia

The Walt Disney Company

Section 1: Recruitment and Resignation

Hiring Policy

Hiring Requirements:


26

Job posting for Wah Tung

The factory does not have any gender restrictions on hiring.

According to a job posting site, there is no education, age or work experience requirement. Applicants for

manufacturing positions should be industrious and willing to endure hard work.

Hiring Process:

By searching “Wah Tung (He Yuan) Toy Ltd. Co. recruitment” on Baidu, the investigator learned that the

factory was recruiting a large number of regular workers. After calling (0762-3268980) and inquiring

with the recruitment department, the recruiter said the factory hires workers from 8 AM to 12 PM and

from 1 PM to 5 PM. Applicants are not required to have had prior work experience for regular worker

positions. Applicants only need to bring their ID card and two one-inch photos of themselves. The factory

covers a worker’s room but not board. Workers are placed 10 to a dorm room. Wages are calculated on a

piece rate system; the more a worker makes, the more they earn. Before starting work, the applicant must

hand over their ID card and new workers’ ID cards will be held onto for three days and a photocopy will

be kept on file.

Entry Methods:

Online recruitment, internal referrals, direct hires

Position Assignment:

Workers can choose which department they are assigned to. The recruiter directly asked the investigator if

they would want to work in the manufacturing department or the packaging department.

On the assembly line, male and female workers’ wages and work intensity is the same. The assembly line

which the investigator was on has about 36 people, with 5 regular workers being male whilst the rest were

female. The workshop the investigator was in had 9 line leaders who were all male and the office workers

were all female. All the managers, product technicians, and other management-level workers are all male.


27

Underage Workers:

The factory requires summer vacation workers to be 18 years of age. There were no underage workers,

and there were no student workers from vocational schools working at the factory. There were three

summer workers in the investigator’s assembly line.

Physical Examination:

Workers are not required to undergo a physical examination prior to starting work. The investigator

learned from interviews with workers that in 2017 the factory arranged a physical examination for

workers. A worker also mentioned that the factory arranges a physical examination once a year. The cost

of the exam was 40 RMB ($5.86 USD), which was directly deducted from workers’ wages. Workers had

the resulting fees deducted from their wages regardless if they had actually attended the physical

examination.

Training and Orientation:

Workers are not required to go through training prior to starting work. New workers submit their ID cards

a day in advance. On the following day, workers must arrive at the factory’s recruitment office before 8

AM. The recruiter hands out factory badges and the office clerk decides which workshop workers are

assigned to.

Left: Workers picking up their factory badges; Right: Close up of the factory badge

Probation:

The factory does not have any rules or regulations related to probation.

Resignation:


28

The worker must notify the factory one month in advance of their resignation. Summer workers must

work for at least one month before they are allowed to resign. The investigator learned from interviewing

a worker who had already resigned that resigning required a month of advance notice as well as a formal

resignation letter, which must be signed by the line leader. Owed wages could be collected on the 7th of

the following month. If the factory’s resignation process is fully adhered to, the worker can resign. If the

factory does not approve of the resignation, the worker will be unable to receive their owed wages after

they quit.

Message the investigator sent to the line leader stating their desire to resign

Investigator (green): Line leader, I am [name], I can no longer do this job anymore. In addition, I have

some emergency family matters to deal with so I have no option but to leave. Every person goes through

hardships so I hope you can understand. You’re very impressive for being able to work at the factory for

over ten years. I hope that you continue to improve.

Investigator: What will happen to my remaining wages?

Line leader: If you leave, then you won’t receive your wages. Thank you for your well wishes.


29

Investigator (green): I have a family emergency but I can’t resign so I can only quit. I am very

happy to have been able to meet you. I hope all your days are happy.

Worker: Stupid girl, regardless if you had resigned or quit, you can still get your money

Worker: You worked for so long

Worker: The last shift you worked earned you 100 or so RMB

Investigator: The line leader won’t let me resign

Investigator: He said I need to work until the 24th of the next month

Investigator: There was nothing I could do


30

Worker: If the line leader doesn’t approve, then you can’t get your wages

Investigator: Is it always like this?

Investigator: If they don’t approve, then you can’t get your wages?

Worker: Yeah

Section 2: Labor Contract

Signing Process:

The factory will sign a labor contract with the worker on their first day. The workshop clerk hands out the

contracts. The worker fills in their name, ID number, address, phone number and other personal

information on the cover of the contract. At the same time, the worker signs their name on the bottom

right corner on the last two pages of the contract. Workers are not allowed to fill in the date. The clerk

also requests the worker to write, “I am voluntarily accepting employment and in order to increase my

wages, voluntarily participate in overtime” on the bottom right hand corner of the form. After signing the

contract, the clerk will immediately collect all the contracts and will not explain the contents of the

contract to the worker.


31

Cover of the labor contract

Contract Terms:

The contract terms include: contract overview, length of contract, work location and description, working

hours, rest and holiday schedule, labor remuneration, social insurance and benefits, labor protection,

working conditions and protection against occupational hazards, attendance policy, changes to, release

and termination of the contract, violation of the responsibilities stipulated in the contract, mediation and

arbitration, others, occupational hazard notice. Workers do not receive a copy of the labor contract. Some

workers have said signing the contract is useless. The only reason the factory wants the worker to sign a

contract is to appease inspections.

Section 3: Working Hours

Peak and off-peak work hours

Peak Off-peak

Daily working hours 10-13 hours 8-10 hours

Days worked per week 6-7 days 5-6 days

Days worked per month 26-29 days 22-23 days


32

Peak and off-peak overtime schedule

Peak Off-peak

Daily overtime 2-5 hours There is overtime on

occasion. On average,

there is 2 hours of

overtime each day and 8

hours of overtime on

Saturdays.

Weekend overtime 16-26 hours

Monthly overtime 84-175 hours

The factory’s busy season is in June, July, August and September. Some workers mentioned that before

the New Year, they were rushing to fill orders, and in January they were working consecutive shifts, and

worked well into the night. The rest of the year is off-peak season, and workers earn the least in the

months of March and April.

The month with the longest overtime was August, 2017, where workers were only allowed one day of rest

for the whole month. Workers can choose not to work overtime and if they choose to do so, they need to

verbally notify the line leader in advance and the line leader needs to approve of their request. If they do

not work overtime, then their day’s wages are calculated based on 7.5 RMB/hour ($1.10 USD). Workers

reported during peak production season, their shifts sometimes do not finish until midnight, resulting in

workers having a rest time of less than eight hours.

Exhausted workers sleeping at their work stations


33

Working Hours and Rest Time

Extended day shift

Morning Afternoon Evening

8:00-12:00；

10:00 – 10:10 (break)

Shift ends at 12:00 and workers

have 90 minutes to eat

13:30-17:30；

15:30 – 15:40 (break)

Shift ends at 17:30 and workers

have 60 minutes to eat

18:30-

20:30/21:30/22:30/23:30；

20:30 – 20:40 (break)

For the extended day shift, overtime wages are calculated from 6:30 PM onwards. When going through

the recruitment procedures, a staff member asks workers which department they’d like to work in, and

workers are able to choose to work in a workshop which implements the two-shift working hour system.

Shifts start at the same time regardless of whether it is peak or off-peak season.

Two-shift system

Working Hours Rest Time

Day shift 8:00-20:00 Two half hour breaks

Night shift 20:00-8:00 Two half hour breaks

The factory’s A, B and C buildings have manufacturing workshops. The assembly line on the third floor

of the C building implements a two-shift working hour system. The rest of the lines implement an

extended day shift system.

Other

Each assembly line has a production quota. In most situations, the quota is 1,800 units and sometimes,

2,500 units. The production quota is easy to fulfill if the machinery does not malfunction and the

manufacturing process runs smoothly. If the quota is not reached, work hours are extended and workers

are not allowed to leave until the quota is fulfilled. The extended shift hours are not included in wage

calculations.

For the morning, afternoon, and evening shifts, workers must arrive to their posts ten minutes early.

During the peak production season, if the factory is rushing to fill orders, workers in the extended day

shift are often asked to work continuous shifts. Their lunch times are shortened from 60 minutes to 50

minutes. Dinner times are shortened to 30 minutes. At 9:30 PM, the line leader will arrange for all

workers to clock out of work and after clocking out, require everyone to continue working. Workers’ shift

end times are pushed to 10:30 or 11 PM. The extended work hours are not compensated.

The factory requests workers clock in ten minutes before their shift starts. When lining up to sign in or out

of work, on occasion workers will need to wait in line. Time spent waiting in line does not exceed five

minutes and is not compensated.


34

Worker signing into work

In most situations, the line leader will hold a meeting after work ends and everyone has signed out of

work. The time spent attending the meeting is not compensated. The line leader usually tells workers to

work faster, and they cannot produce defective products, and they are not to speak during shifts.

The investigator did not come across any workers who chose not to work overtime at night. If workers do

not work overtime, then their wages during the day will be calculated according to the 7.5 RMB/hour

(1.08 USD/hour) standard. The investigator believes that the worker would choose not to work overtime

only if there was an emergency, and in these cases, the line leader would agree. The line leader is rather

polite to the summer workers at the factory. Some of the female workers say that the line leader on the

assembly line is especially mean, and a lot of the time, if not enough products have been produced, they

wouldn’t allow workers to finish their shift. They will randomly request workers to work overtime until

10:00 PM or 11:00 PM at night, and workers are not paid extra for this time.


35

Workers attending a meeting after their shift

Section 4: Labor Remuneration and Benefits

Wages:

Peak Season Off-peak season

~3,000-4,500 RMB ($439.19 - $658.78

USD) after deductions

~2,000 RMB ($292.79 USD) after deductions

According to the recruitment information on the factory’s website, the factory implements a piece rate

wage system so the more the worker makes, the more they earn. In regular conditions, over 70% of

workers can finish their production quota before 8:30 or 9:30 PM. Even if the worker completes their

production quota early, the worker must continue working until the shift ends. Many workers reported

any product made in excess of their quota is not included in their wage calculations.


36

Production target chart

Every night, the line leader will write the next day’s target production quota and target wages on a board.

The day after, at 11 AM, each worker will go to the production paper to see what their total wages were

for the previous day and then sign off.


37

Worker: [Message sent Monday at 10:44 PM] Just got off work

Investigator: That’s terrible

Investigator: How much did you earn today?

Worker: We’re rushing to make the deadline

Worker: Not sure

Worker: Won’t know until tomorrow

Worker: My feet are so sore

Normally, workers work from 7:50 AM to 8:30 PM and earn an average of 130 RMB ($19.03 USD). If

workers have their shifts extended to 9:30 PM or later, their wages are around 140 RMB ($20.50 USD).

In some incidents, workers may work until 10:30 PM and if so, will earn around 150 RMB ($21.96 USD).

Overtime on Saturday is from 8 AM to 5:30 PM and workers earn around 160 RMB ($23.40 USD) and if

workers finish their shift at 6:30PM, wages are around 180 RMB ($26.33 USD). Workers who work until

8:30 PM or 9:30 PM earn around 210 RMB ($30.74 USD), 230 RMB ($33.67 USD), or 240 RMB

($35.13 USD).


38

On average, the factory’s manufacturing department does not finish work until 10:30 PM, with workers

earning 170 RMB ($24.89 USD) on average. The highest wages earned for overtime on Saturday is 300

RMB ($43.92 USD).

The workers on each assembly line have different wages, as wages are calculated by the line leader.

Workers reported they were unclear how exactly their wages were calculated.

A worker keeps track of their daily wages in a notebook. Their records show they receive no wages when

there is a holiday or when they ask for leave. Of the 31 days in March, there were 14 days where the

worker earned less than 100 RMB ($14.53 USD) for their day’s work and 7 days where they earned

nothing due to holidays. Their total monthly wages were 2,425.08 RMB ($352.32 USD).


39

Daily production chart

If a worker takes a day off or there is holiday, workers receive no wages. If a worker asks for leave during

the night overtime, their morning wage’s will be calculated based on 7.5 RMB/hour ($1.10 USD). If the

assembly line switches to producing a different product and has to adjust its work order, which results in

the quota not being fulfilled, regardless of how much overtime workers work, their wages will be

calculated to be 105 RMB/day ($15.37 USD). If a product needs to be re-done, the time spent remaking

the product will not be calculated into the worker’s wages.


40

Investigator: Did you go to work today

Worker: I didn’t, I asked for a week off

Investigator: You don’t get paid if you take days off right?

Worker: Yeah

The factory requests workers to verify their total wages and if there are no issues, sign off on it from the

20th to 23rd of each month. Wages are then distributed on the 25th of the month. The distributed wages are

calculated starting from the end of the previous month and are direct deposited to the worker’s

Construction Bank account. Workers do not receive a pay slip.

Leave Policy

When requesting sick leave, the worker must personally visit the workshop and ask the line leader. Once

the line leader approves of their request, they will receive a leave request form, which must be given to

the supervisor to sign.

Leave request form

Workers who ask for leave via phone or text message will not have their requests approved. There was an

incident where a female worker, who was riding a bike from work, fell and hurt herself. She sent her line

leader a WeChat message but her leave request was not approved. Because of this, she had no option but

to go to the workshop to ask for leave. If a leave request is not approved, the worker will be recorded as

having missed work which results in a wage deduction.


41

Left:

Posted in the assembly line WeChat group

Worker: Line leader, I am [worker’s name]. Because of a traffic accident, I won’t be able to come to

work. I hope you can understand.

Right:

Private message with worker from the left picture.

Investigator: When you asked for leave, did you do it over the phone?

Worker: No, I asked for leave in person

Investigator: You were hurt so seriously and they still required you to ask for leave in person?

Worker: Yeah! This isn’t a very formal factory, the wages are too low

Investigator: Right, I feel that way too

Holidays:

Workers receive no wages on holidays or during leave (regardless if it was regular leave or sick leave).

On legal holidays, workers are not paid their wages. The investigator only saw one pregnant worker (who

was approximately seven or eight months pregnant). Their working hours and intensity of their work was

similar to other regular workers.

Social Insurance:

The factory requires workers who are 45 years and older to purchase social insurance or else they will not

be allowed to work at the factory. Social insurance is around 200 RMB ($29.28 USD), which is deducted

directly from workers’ wages each month. Other than workers who were 45 years and older, the rest of

the workers do not receive social insurance. Many workers say that as their monthly wages are very little;

they are not willing to spend their wages on insurance. Even if a worker is willing to purchase social

insurance, if their age is below 45, the factory will not purchase insurance for them.

Recreational Facilities:

There is a basketball court by the factory dormitories. There are no other recreational facilities.


42

Basketball court

Section 5: Dining and Accommodation

Workers can choose to live in the factory dormitories and eat at the factory cafeteria. The dorms are free

but workers must pay for their meals. The factory does not provide a housing or meal stipend.

Dining Conditions:

The factory has two cafeterias. At one cafeteria, the meals all cost 6 RMB ($0.88 USD) and at the other

cafeteria, all the meals cost 7 RMB ($1.02 USD). For breakfast and dinner, the cafeteria sells noodles for

3 – 5 RMB ($0.44 - $0.73 USD) a bowl. The two cafeterias are both small in size, as many people go to

the cafeteria to eat lunch, if a worker shows up late, it will be difficult for them to purchase their meal.


43

Workers buying and eating food at the cafeteria

After work, in the afternoon, workers can purchase food from the small food carts by the factory entrance.

Cold noodles are 4 RMB ($0.59 USD) for a bowl, meat dumplings are 2 RMB ($0.29 USD) for one, rice

porridge is 2 RMB ($0.29 USD) for a bowl, and noodles are 3 RMB ($0.44 USD) for a bowl.

Workers in the two shift system only have half an hour for meals.

Small food carts located by the factory entrance

Accommodation Conditions:

Factory dormitories are divided into regular worker dorms and management personnel dorms. Regular

workers are placed 8 – 10 people to a room. Regular workers’ rooms have two electric fans, a bathroom

and a closet. The dorm does not have hot water; when workers take showers, they must go to the hallway

and fill up a bucket with water. The dorm rooms do not have outlets so workers who need to use

electricity can only go to the dorm management office on the first floor. The management personnel dorm

rooms have air conditioning and are full suites.


44

Approximately more than 60% of the female regular workers live close to the factory. If both parents are

working, their child is looked after by an older relative.

Male and female regular workers live in the same dormitory building. Female workers live on the 2nd,

3rd, and 4th floors; male workers live on the 5th and 6th. The dormitory of the management is on each

floor and most of the management is male. During the investigator’s time at the factory, she never heard

of any female workers encountering anything unsafe when arriving and leaving for work. The factory,

though, is in a remote location and public transportation is inconvenient. In the factory’s neighborhood,

there are some relatively old men who just idly hang around. While the investigator was at the factory,

she never dared to go out alone after dark.

Dorm room


45

Dorm room, balcony, and entrance to the balcony


46

Dorm beds, toilet and hallway

Section 6: Occupational Safety and Labor Protection

Safety Equipment:

The workshop has ventilation equipment and an electric fan. The temperature in the workshop is lower

than the outside: 30oC or 86oF. The bathroom in the workshop is poorly maintained. When the weather is

unpleasant, the bathroom will emit a foul odor, which can be smelled from two meters or roughly six feet

away.


47

Bathrooms are located next to the production line

The emergency exits are kept free of obstructions. The manufacturing machinery will occasionally

malfunction and is not routinely inspected.

Fans and fire extinguishers located in the workshop


48

Personal Protective Equipment:

Workers who work in positions that come into contact with the following substances: cyclohexanone,

rubbing alcohol, instant adhesive, as well as equipment used to polish toys, must wear facemasks.

Workers using polishing tools

Left: rubbing alcohol; Right: adhesive


49

Left: instant glue; Right: rubbing alcohol

When handling toolboxes that are labelled with “high temperature, be careful of burns” signs, workers

must wear gloves. One of the work positions next to the investigator had a box placed on it and the light

from the box was extremely bright and blinding. Despite the box being one meter away, the investigator

could still feel the heat coming off from it. The worker was wearing a very thick glove to protect from

burns, but there was no other protective equipment.

Machinery labelled with the sign “high temperature, be careful of burns”


50

Facemasks are replaced on a daily basis. The investigator was unclear how often gloves were replaced.

Workers who handle hazardous material do not undergo a physical examination mid-post or after

resignation. Workers rarely have their positions changed on the assembly line. Workers in positions that

come into contact with hazardous material will work in the same position for long periods of time before

being transferred. There is a bucket located in the corner of the workshop, which has a sign attached to it

saying, “recycling bin for hazardous material”. The bucket has a lid.

Recycling bin for hazardous material

The contract has a page regarding what kind of occupational hazards certain work positions may be

exposed to as well as what protective measures workers can take to protect themselves.

The investigator worked in the packaging department. One of the work positions required workers to

brush the battery case with water repellant oil. The oil was extremely sticky, does not dry when exposed

to the air and when working, workers needed to wear gloves which were provided by the factory.

However, if the gloves were worn for too long, a worker’s hands would become sweaty, making it

difficult to remove the gloves. As the oil would seep through the gloves, after work, the investigator

would need to wash their hands with soap or laundry detergent for their hands to be clean.

The water repellant oil also had a strong smell, however the workshop’s other smells were more

overpowering. A worker said that the oil was toxic and hazardous to health, and a mask was required

when working. The worker also mentioned that many materials at the toy factory were toxic and it was

absolutely necessary to wear a face mask. However, workers were not provided with face masks.

The glue used in the packaging department emits an extremely unpleasant odor. Facemasks are provided

for workers in the polishing and glue brushing positions; however, some workers feel that wearing a

facemask is uncomfortable so they choose to not wear a facemask or wear it incorrectly. For example,

they place the facemask so it only covers their mouth and not their nose. The polishing machine emits a

foul smell, and the investigator speculates the gas created is hazardous.


51

The chemical products used in the die-cutting department and production department emitted strong odors

in the workshops. Some workers in the production department reported that the industrial chemicals in the

workshop smell terrible and wearing two face masks did little to help. Each day they went to work it felt

like they were inhaling drugs. The die-cutting department in building A had its door opened and the

sound of machinery operating emanated from the department.

Environment, Health and Safety Committee:

Workers do not undergo an environment, health and safety training prior to starting work. The factory

also does not have an environment, health and safety committee.

Section 7: Fire Safety

The workshop and dormitories have fire hydrants and fire extinguishers but no emergency aid kits.


52

Left: fire hydrant and sign indicating where the emergency escape route is; Right: fire hydrant and fire

extinguishers in the workshop as well as signage prohibiting smoking

The emergency escape routes and exits in the workshops and dormitories are all clearly labelled and there

is nothing obstructing the path.

Emergency exit signs

From time to time, the emergency exit in the workshop will be locked. Workers reported that every

March or April, during the off-peak season, the factory will have its annual fire drill.


53

Section 8: Rewards and Penalties

When working, workers are not allowed to wear slippers. If workers do not follow this requirement, they

will be fined 10 RMB ($1.46 USD). Workers who miss half a day’s work will be fined 10 RMB ($1.46

USD), missing a full day’s of work results in a 20 RMB fine ($2.93 USD), and the worker will be fired if

they miss three or more days of work consecutively. If a worker arrives five minutes late to work, they

will be deducted 5 RMB ($0.73 USD); if they arrive 10 minutes late, they will be deducted 10 RMB

($1.46 USD). Fines are paid in cash and are paid directly to the line leader.

When there is no one in the dorm room, electricity must be turned off. If the electricity is not turned off

and it is discovered, the residents will be fined but the specific amount was not ascertained. Workers were

verbally informed of all the penalties by management; there was no written version of the penalty

policies. The bulletin board in the workshop has an employee manual affixed to it but the papers have

already yellowed and the print is in small font so it is difficult to read clearly.

Employee manual

Workers said they were unsure of any reward policies.

Section 9: Labor Union and Grievance Procedures

Labor Union

Interviewed workers said they had never heard of a labor union or worker representative. For many

workers, when they encounter a problem during their work, they choose not to speak up about it or quit.


54

Grievance Procedures

Each workshop building’s hallway has a bulletin board with the ICTI’s code of business conduct posted

on it but the notices have already yellowed, the print is small, making it difficult to read and no workers

pay attention to the poster.

ICTI code of conduct

There is a suggestion box located in the workshop building but boxes of supplies are stored in front of the

box.


55

Suggestions box blocked by supplies

Section 10: Other

Client Visits and Audits

In the first half of the year, there were many factory inspections, particularly in March and April. The

people conducting the inspections were primarily focused on inspecting product quality. If workers were

asked how much their monthly wages were, they were told to respond that they earned more than 3,000

RMB ($438.78 USD). During factory inspections, some workers on the assembly line were arranged to

go clean or package goods.

The ICTI Code of Business Conduct and other related documents that are on the factory’s bulletin board

have all yellowed. The investigator believes that the factory inspections are not conducted by third-party

auditors or an international brand auditor.

Personal Freedom

There is no limit to how often a worker can go to the bathroom or get a drink of water during work hours;

however, if they go to the bathroom too frequently or stay for too long, the line leader will reprimand

them. After work, workers are allowed to freely enter and exit the dorms.


56

Area where workers store their water thermoses

Worker Satisfaction

The reason for why workers choose to work at Wah Tung include: 1) it is close to their families, making

it convenient to take care of their elderly relatives or children; 2) they are old, education levels are low,

and they have no better option; 3) it is difficult to find a job and they need one to survive.

Interviewed workers expressed that overtime hours are too long. In the month with the most overtime,

they were only given one day of rest. If they do not work overtime at night, then their whole day’s wages

will be calculated based on a 7.5 RMB/hour ($1.10 USD) standard. If workers do not work overtime, their

monthly wages would be less than 2,000 RMB ($292.52 USD). Given this reality, workers have no option

but to work overtime. Workers revealed there were various strong smelling chemical substances in the

workshop that are detrimental to their health. Workers have no option but to endure working in these

conditions. Workers try to go home and cook or pack food to eat at the factory as much as possible.

According to workers, eating out costs around 30 RMB ($4.39 USD) a day, which is unaffordable.

Workers follow management’s order and do not voice any of their disagreements. Workers reflected that

even when their monthly wages were more than 3,000 RMB ($438.78 USD), it was not a significant

amount of money as local commodity prices are high. The workers viewed the future one day at a time

and did not have any definite plans for their future.

No sexual harassment occurs. The investigator speculates that the factory has a higher ratio of female

workers, and a large number of male staff at the administrative level because most of the female workers

are older (many are older than 45), poorly educated, naive, meekly accept everything, and their life is

more focused on family and children. The city development of Heyuan City lags far behind other cities,

the hygiene conditions are relatively poor, and the workers in Wah Tung factory seem to be very poor.

The management level staff has work uniforms. The line leader wears a red hat and yellow uniform, and

the investigator only saw around five to six female line leaders at the factory. The rest of the line leaders

were male. The workshop leader in the workshop where the investigator was working was male. The

office clerks were female. The investigator only saw one female amongst all the management level staff.

On the investigator’s assembly line, there were around 36 female workers, and two were unmarried. Other


57

than summer vacation workers, the majority of the female workers were of an older age. Around 10% of

the female workers were of a younger age.

The whole investigation was completed by sacrificing the investigator’s sleeping hours as she only had 5

hours of sleep every day. Regarding women issues, there is no obvious difference in working hours and

wages between male regular workers and female regular workers. It is also difficult to find out about the

gender ratio, position, and wage difference at the administrative level. Workers are not allowed to talk

when working on the assembly line so the investigator was only able to interview the female workers

during the limited rest period.

Investigator’s Journal

June 26, 2018

Today we didn’t finish work until almost 10:00 PM. Around 9:45 PM, the line leader told everyone on

the line to assemble and started criticizing our work performance. He said that even though we had met

the production quota for today, we had an additional two workers so why was our production amount

lower than yesterday’s? He said this means that there were two people on the line who were superfluous

and didn’t actually earn their wages. He said that we needed to meet the quota regardless of how late we

had to work or how much overtime we had to do. We were only allowed to leave after we had fulfilled the

production quota. Workers should be working every second. If the quota was reached but the shift had not

yet ended, workers still need to continue doing the task before them. There will be people coming to

inspect the factory tomorrow and the day after. The factory inspectors won’t care if the quota has been

reached. It will be unacceptable if they see anyone on the assembly line not working.

Workers at a meeting

My task for today was to test the currents of the batteries. The work station I was at was very close to the

bathrooms. The bathrooms in the workshops are not very clean and the smell that emanates from them is

disgusting. The temperature outside today was very high: 35°C (95°F). It was a bit cooler in the

workshop. Even though the ventilation and electric fans were constantly running, I still felt very warm.


58

During our break, I asked a worker who had been wearing a facemask while working, if the glue she used

was hazardous to health. She said, of course, or else why would she wear a facemask. I told her that the

glue smelled awful and I could smell it all the way from my work position, which was next to hers. She

said there was nothing she could do and that there was another glue that smelled even worse. She

continued and said she really didn’t like brushing glue onto the toys because she felt that if the fumes

from the glue were inhaled there would be negative effects, but she had no option but to deal with the

risks.

Workers in the polishing and glue brushing positions are required to wear a facemask when they work;

however, some workers feel that wearing a facemask is uncomfortable so they choose to not wear a

facemask or wear it incorrectly. For example, they place the facemask so it only covers their mouth and

not their nose. During our break this evening, I was going to examine the operating procedure for the

polishing position but was unable to read the instruction manual because the location it was placed in was

too high to reach and was impossible to read. Every time a worker used the polishing machine, it would

start to emit a foul smell. I feel like the gas it creates is hazardous. I asked the worker behind me if

workers were required to wear a facemask when brushing on glue, as there was a worker doing the same

work who wasn’t wearing a facemask. She told me in a quiet voice, “Don’t worry about others, focus on

yourself.” The female workers in the factory were somewhat old and many of them had children who

were already 20 or so years old. Some people had short tempers and if there was something wrong with

part of a toy, they would blame the person who worked on it last. They are especially worried about not

being able to reach the production quota or not receiving their wages. So, on the assembly line, they never

stop working and make as many products as they possibly can.

Workers on the production line


59

A two-shift system is implemented on the third floor of building C. The day shift is from 8 AM to 8 PM

and the night shift is from 8 PM to 8 AM. I heard from other workers that the assembly line for the two-

shift workers never stops operating. They are paid based on a piece-rate system and can usually earn

3,000 to 5,000 RMB (431.28-718.80 USD) in wages, but they are all extremely tired.

June 30, 2018

This afternoon, a worker (name: Zhang) asked me to help her request leave from the line leader since she

fell off the electric motorcycle on the way home at noon. I showed her wechat message to the line leader,

and the line leader said no. Then Zhang said that she was in hospital and sent me a video of her injured

head. I replied that the line leader did not approve her request. A few moments later, Zhang requested to

take one day off in the work wechat group, saying that she had a car accident and hoped the line leader

would understand. The line leader did not reply. I have heard from other workers that a wechat request

will not be approved. You have to go to the factory by yourself and get a written request to leave.

However, today is Saturday, so it will not be considered as absenteeism if you do not come to work, and

your salary will not be deducted too.

I worked overtime until 8:40 PM in the evening and was paid 240 Yuan. At the meeting after work, the

line leader said that there was one worker (male) who goes to the toilet for at least ten minutes at a time

during work, sometimes he was in the toilet for 18 minutes. In addition, he goes to the toilet too often.

The line leader said that he would not call this person’s name, but this worker knows who he is. The line

leader said that each work position on the assembly line must be connected to each other; if the front

work position is slow, there will be no products at the back work position, and this is not good. There are

3 summer workers in my assembly line. The line leader specially reminds the summer workers to arrive to

the factory 10 minutes before work. This rule also applies to other people. He said that he has the right to

deduct the salaries of people who show up late: 5 Yuan for every 5 minutes late, 10 Yuan for 10 minutes

late. And if you are late three times in a day, you would be deducted 30 Yuan. The line leader said, “let’s

see who gets deducted first.”

This Saturday, we went to sign out at 5:50 PM. I heard from other workers that we don’t have to sign out

on the night shift on Saturdays. I returned back to the factory at about 6:20 PM, and the time-card

machine was locked. No one went to sign their card.

Most of the workers are not clear of the rewards and penalties system in the factory. The dorm policy

states that electricity must be turned off when the room is not occupied. Workers will be issued a fine if

caught leaving the electricity on, but none of the workers know the procedure and exact amount of fine.


60

Bulletin board inside workshop with employee manual

I told the line leader I wanted to resign after work today, but he said I am not allowed to resign without

working for a full month. I said it’s too tiring and I can’t handle this job anymore, but the line leader tried

to convince me saying that he has been continually working factory jobs since he began in Guangdong at

14/15. He said one who is working should focus on getting one’s job done. He compared it to serving in

the army: one cannot just run away from the army after being enlisted for one or two months. That is

desertion. He asked, wasn’t attending classes tiring too? You have morning and night self-study sessions

back then. He said since you have a job now you should complete the tasks assigned. I asked when is the

earliest date I can resign and he answered at least on the 24th or 25th of next month. He said it is currently

the factory’s peak season and they had the intentions to open up another production line in our workshop

but are unable to do so due to lack of workers. He said we didn’t have enough workers on our production

line as well and he had to borrow workers from other production lines. He asked me to hold on until the

20th of next month so I could bring a few thousand RMB home. He said my parents would be pleased if I

did this. He said that I can’t just resign now as resignation requires a month notice and a resignation letter.

The weather here is always 35~36 degree celsius. The workshop has large electric and exhaust fans

turned on so the temperature inside was cooler compared to outside. There are two fans installed in the

dorm room but it is still very hot, especially when I tried to rest in the dorm after lunch everyday. I would

sweat even though I am not doing anything other than laying on the mat. Sometimes I woke up in the

night and would be sweating profusely. And most of the times I woke up in the middle of the night

because it is too hot. Although the dorm provided cooling tea, it doesn’t help relieve the heat when the

temperature is really high.

There are a total of 8 production lines in the packaging department. Each line accommodates 30 workers

and there are approximately 240 workers in each workshop. There are 8 workshops in the factory and one

of them runs on a two-shift system. Based on my rough calculation, there are about 2,200 workers in the

factory. The factory hired a large number of summer workers, about 200-300. Most of the summer

workers are local high school graduates. They come from poorer families, and have average gaokao

results. Their only purpose working in the factory is to earn money. Many of them experienced the

hardship of working in a factory and thus decided to pursue study in university.


61

Workers leaving the factory at night


62

Lovable Products (Hong Kong) Ltd. Investigative Report

Company Profile3

Lovable Products (Hong Kong) Ltd. has its own premises in Hong Kong and production plants in

Dongguan, China. Established in 1992, Lovable Products has grown into an original equipment

manufacturer OEM with a workforce of more than 1,000 people. Since 1999, Lovable's Hong Kong office

and China factory have become ISO-9001 certified which is an industry recognition of the company's

commitment to good quality and exceptional customer services.

Factory Name: Dongguan Lifabao Toy Products Limited Company

Address: Er Heng Road, Chiling Industrial Area, Houjie Town, Dongguan City, GuangDong Province

Contact: (86)769-83099098

Main Products: Plastic Educational Toys including realistic animal toy figures, ancient samurai series.

Brand companies manufacturing at Lovable: Safari Ltd, Schleich, Ravensburger

Total number of staff: Approximately 800

Total number of workers: Approximately 500

Male to female ratio of workers: 3:2

Number of workers interviewed: ~30

Male to female ratio of workers interviewed: 1:1

Department that interviewed workers belong in: Manufacturing department section 1

Interview methods: Anonymous in-person interviews

Products manufactured at Dongguan Lovable

Schleich Lioness

3 Information found on factory’s official website at http://www.lovable.com.hk/ and recruitment website

https://jobs.51job.com/yx/co3052066.html

http://www.lovable.com.hk/

https://jobs.51job.com/yx/co3052066.html


63

Schleich Lava Dragon


64

Schleich Turtle

Schleich Appaloosa Mare Toy Figurine


65

Schleich Monster Kraken with Weapon

Schleich Blue Whale Figure


66

Ravensburger Product

Safari Product


67


Hiring Policy

Hiring Requirements

According to the hiring requirement listed on job recruitment websites by Dongguan Lovable, workers

may be male or female between 16 to 50 years old, must be able to work fast and not color blind.

Online hiring advertisement of Lovable factory recruiting regular workers (packaging/painting/spray

painting) and injection molding workers


68

A hiring flyer of Lovable factory recruiting 30 spray paint workers, 50 paint workers and 20 injection

molding workers. The monthly salary ranges from 4800 to 8000 RMB (691.29 USD to 1152.16 USD).

Hiring Process

Hiring advertisements were posted at the main entrance and back entrance. Applicants are not required to

contact the factory beforehand, and can proceed directly to the security office at the main entrance, submit

their ID card, fill out a form and take an interview. The interview was conducted by the security officer,

and he asked four questions in total: “Where are you from?”, “Which position are you applying to?”,

“What is your previous work experience?”, and “Do you know anyone in this factory?”. After completing

the interview, the investigator filled out a personal information form, and on the back of the form is an

agreement to comply with the factory’s arrangement of overtime work. Applicants need to sign and print

their fingerprint on the agreement. They are also required to submit four passport size photos and three

photocopies of the front and back of the ID card. No deposits need to be paid, documents will not be

withheld and the factory does not request new workers to pay any fees.


69

Hiring advertisement hanging outside the factory reads Loveable factory is hiring large number of male

and female workers, base salary is 1720 RMB (247.71 USD), monthly salary can go up high as 5500

RMB (792.11 USD) or above.

Entry Methods:

a. Directly applying

B. Internal referrals

Position Assignments

During the investigation period, the factory was only hiring injection molding workers. Later on, as there

were a number of summer workers who resigned from the packaging department, the department was

short staffed. A few workers in the injection molding position could no longer endure the work, so they

requested to switch to the packaging department from the manager of the packaging department. The

workers switched after receiving signatures of approval from both the packaging department and injection

molding department managers.

Underage Worker:

No workers under the age of 16 were found inside the factory but they hire a large amount of summer

workers. The majority of the summer workers are high school graduates, some of them are college

students and they are assigned with the same tasks as a regular worker, mainly in the injection molding

workshop and packaging workshop. Summer workers receive 9RMB/hour (1.30 USD/hour).


After filling in a personal information form, the security officer signed and handed out a physical

examination form. Workers then proceed to the Houjie Chiling Clinic for a physical examination.

Workers had to pay 32 RMB (4.61 USD) for the physical examination and no receipt was provided but


70

the cashier would put a stamp on the physical examination form which said “PAID”. The physical

examination only covers one part: chest X-rays. Workers can pick up their physical exam results on the

spot. After returning the physical examination form to the security office, the dorm security officer will

sign a check in form and the workers can then move into the factory dorm.

Training and Orientation

There is no pre-job training. Workers moved in to the dorm on the first day immediately started working

on the second day. On the first day of work, team leaders approached the new workers at their working

positions with a fire safety training attendance list along with a few different forms and asked them to

sign it. Workers do not have the time or opportunity to read through the content of the forms. When

workers asked the team leader what forms they were signing, the leader answered “Hurry up, just quickly

sign it.” On Friday after work, the team leader asked the new workers recruited that week to gather in the

training room located on the first floor of administrative building. New workers were given a 15 minute

injection molding training by trainers. This was the only job training the investigator received during the

investigation period and was unpaid because the training took place after work.

Injection molding training


71

Injection molding training

Probation:

A worker’s probationary period is three months.

Resignation:

A worker’s probationary period is three months. If a worker resigns during their probationary period, they

must notify their supervisor three days in advance. If resigning during the contract period, they must

notify their supervisor a month in advance and fill out a resignation form. The factory settles wages every

Thursday and workers who resign either during the probationary period or contract period, write their

desired date of resignation on a Thursday, so they can have their wages settled on the day of resignation.

If their desired date of resignation falls on a day earlier than Thursday and workers would like their wages

to be settled immediately, the factory will deduct the equivalent of one week’s base wage which amounts

to around 300 RMB to 400 RMB (43.21 USD to 57.61 USD). But if the desired date of resignation falls

on a day earlier than Thursday and workers do not require wages to be settled immediately, they can fill

out a form to authorize others in the factory to sign the paystub on his or her behalf. No wages would be

deducted in this case and the wages would be distributed on the Thursday accordingly.


72


Signing Process

On the second Friday at work, a clerk came in with a new workers name list in hand and approached the

investigator at his work position. The clerk matched investigator’s name with his name and work ID on

the list and had him sign at the end of the name list. Then, the clerk took a contract out of a stack of blank

contracts, asked the investigator to sign and print their fingerprint at the last page of the contract. Once the

clerk collected everything, she moved on to other worker. The investigator asked why is there only one

contract when it is common to have two contracts signed. The clerk answered that these are only used to

file reports to the Labor Bureau and nothing else. The investigator enquired about when he could have the

contract back but the clerk said they were not giving back these contracts and workers should request it

from the Human Resource department.

When applying for resignation, the investigator asked how he could retrieve his labor contract. The clerk

said: “We need to save these contracts and workers are unable to retrieve it”, a senior ranking

administrative personnel sitting next to the clerk asked: “Why are you asking for the labor contract? Did

you want to sue us using the contract? Why would I let you guys take the contract to sue us?”. The

investigator was unable to retrieve his labor contract in the end. The investigator asked other senior

workers who had been working at the factory for a number of years and most of them had not received

their labor contract.

Contract Terms

Through the course of the signing process, the contents of the contract were not explained by anyone. The

whole signing process took less than a minute, the investigator did not have the time to read through the

content and was thus unclear of the contracts terms.


Workers at their work position


73

On a regular day, there are 11 hours of work, 6 days of work a week and 26 days of work in a month. By

default, workers work 5 days a week and 8 hours a day. There were 3 hours of overtime each day and 11

hours of overtime on Saturday, with a total of 26 overtime hours a week, and a total of over 104 overtime

hours a month.

The overtime hours are fixed regardless of peak season or off peak season. During the recruitment

process, the investigator asked the security officer if there is overtime work on Saturday. The security

officer answered: “Saturday is a regular working day, we usually arrange Sundays as rest days”. In other

words, working on every Saturday is common in the factory and workers only consider working on

Sunday as overtime.

Work Hours

Injection Molding Department Morning Afternoon Overtime

Day shift 7:30——11:30 12:00——17:00 17:30——19:30

Night shift 19:30——23:30 0:00——4:00 4:30——7:30

Packaging Department Morning Afternoon Overtime

8:00——12:00 13:45——17:45 18:45——21:45

Workers in the injection molding department only have half an hour for dinner and breakfast, and hence,

there isn’t enough time for them to take a break. Workers in the packaging department have more time for

meals.

Workers have at least 10 hours of rest time every day, one day off every week and 30 minutes of meal

time between each shifts. After every two weeks, the day and night shifts will switch and workers will

have a 24-hour rest period when switched.

Workers can choose not to work overtime, they only need to inform the manufacturing department’s team

leaders. No written documents are required. There is no punishment for not working overtime.

There is a fixed manufacturing quota and different positions have different quotas. The injection molding

department had a production quota of 1200~3500 units and the packaging department had a quota of

6000~10000 units. The production quota is decided based on the design and level of difficulty of

manufacturing the item. Under normal circumstances when machines are working fine and materials are

sufficient, it would take 10 hours to reach the production quota. However, it is not easy to reach the target

quota when situations like machine maintenance or insufficient materials lasts for more than an hour. If

workers do not complete the quota, they will not receive the reward for over production. If in a month, the

rate at which they meet the target production is less than 50%, then workers will have deductions made to

their meal subsidy.


74

Under the two shift system, workers do not finish work late nor are they asked to go to work earlier.

Workers clock in and out at a digital time clock using their factory card both morning and night, twice a

day. They clock in 15 minutes before work between 7:15 ~ 7:30 AM and after work at 7:30 PM. The line

to clock in usually takes less than a minute so it is unpaid. Work hours are recorded by a factory clerk

every day and if mistakes were found, the clerk would inform the team leader on duty and the leader

would inform the worker to have the problem fixed.

There are no meetings after work. Occasionally there would be meetings before work but this is unpaid.

Meetings usually take place around 7:20 AM and were usually used to conclude problems encountered in

the workshop on the previous day such as workers working too slowly, processing of returned products,

conflict between workers and machine repairers. The team leader would advise or admonish the workers

based on the problems encountered and it usually takes less than three minutes.

Workers at the factory

Compared to the packaging department, the injection molding department’s working hours are very tight

as they only have 30 minutes for meals. They work from 7AM to 7:30PM a day and there is almost no

rest time in between work. The workers were so exhausted that they would just return to their dorm and

sleep once their shift ends.


75


Wages

The average monthly wages is approximately 4000 RMB (576.08 USD), after deductions and include the

base wage of 1720 RMB (247.71 USD), overtime pay, work position bonus, night shift subsidy and the

full-attendance bonus of 50 to 80 RMB (7.20 USD to 11.52 USD). Workers’ wages are calculated by both

hourly rate and piece-rate. The factory has a complicated method of calculating wages, and the amount

for the bonus, night shift subsidy and the meal deduction may increase or decrease according to workers’

attendance rate and how many times workers reach or exceed the production target. The photo below

shows that there are five different amounts for the night shift subsidy: 30 RMB (4.32 USD), 60 RMB

(8.64 USD), 90 RMB (12.96 USD), 130 RMB (18.72 USD) and 160 RMB (23.04 USD).

Rewards and overproduction scores for injection molding workers in July

Workers are paid 14.83 RMB/hour (2.14 USD/hour) for overtime work on weekdays, 19.77 RMB/hour

(2.85 USD/hour) for overtime work on Saturday and 29.66 RMB/hour (4.27 USD/hour) for overtime

work on holidays. The factory deducts housing fees, water and electricity fees, social insurance fees and

meal fees from workers’ wages and the total amount of deduction is approximately 500 RMB (72.01

USD/hour).


76

The factory pays workers’ wages between the 28th to 30th of every month and wages are directly

remitted to workers’ bank account at the Dongguan rural commercial bank. Workers have to go to the

local Dongguan rural commercial bank to open an account to receive their wages. Summer workers do

not have to create an account, and they receive cash when leaving the factory. Paystubs are issued in the

first half of the month and workers need to sign the paystub to confirm that the wages are correct and

return this to the team leader. Workers are not allowed to retain a copy of the paystub.

Dongguan rural commercial bank

Leave Policy

Workers can choose not to work overtime, but they need to inform the team leader. A written request for

leave is not required. There are no penalties for leave.

Vacation

The factory recruitment briefing said that there will be an annual 5 day vacation after one year’s

employment, 10 days annual vacation after 10 years of employment, and 15 days’ vacation after 20 years’

employment. The investigator is unsure whether annual vacation is paid. It is not known if there are other

holidays.

Social insurance

The factory purchases social insurance for workers which includes pension, medical insurance,

unemployment insurance, work injury insurance and maternity insurance. The factory pays 520.52 RMB

(74.97 USD) and deducts 276.08 RMB (39.76 USD) from workers’ wages a month.


77

A notice on adjustment of social insurance payment

Recreation Facilities

There is a basketball court and two pingpong tables next to the factory canteen. There is also a staff

lounge with free WiFi. WiFi is not available in the dorms.

According to the leaflets on the factory’s bulletin board, the factory organized a kayaking event and

family day for the workers’ children in August.

The flyer above shows that the factory organized a kayaking event


78

Staff lounge


Dining Conditions

Workers can choose whether to eat in the cafeteria or live in the dormitory. There is no subsidy provided

if one chooses not to eat in the dining hall.

The dining hall is on the first floor of dorm building, and there are two food service windows. Lunch and

dinner are provided at 11:30 AM and at 5:00 PM, offering meals with two meat dishes and one vegetable

dish and includes Chinese herbal tea, soup, rice and occasionally, watermelon. For breakfast the dining

hall serves noodles, taro, and rice porridge. One of the food service window provides “team leader

dishes” and that is not for general workers. There is another dining hall that provides food for higher level

managements, which serves better dishes. Workers sometimes complain about the factory’s meal supply

class privilege and said: “Management does not run the machines, does not perform labor, and they have

better meals. Our workers stand all day running machines, consume the most human power, so we should

eat better!”

According to the factory’s salary calculation method, those whose average daily score is less than 4 points

will have 260 RMB (37.45 USD) deducted for meal expenses, those whose average daily points are

higher than 4 points and lower than 6 points will have 130 RMB (18.72 USD) deducted for meal

expenses.


79

Workers having lunch

Workers buying lunch


80

Workers’ meal

Accommodation conditions

The factory provides workers with dorms. There are 4 or 5 metal-framed beds, two fans, one air

conditioner, one bathroom, one toilet and a storage cabinet in a room. Workers are placed 10 to a room.

Everyone is deducted 30 RMB (4.32 USD) for the housing fee. The water and electricity fees are shared

by workers, and the total deduction is about 100 RMB (14.40 USD) per month. If a worker chooses not to

live in the factory dormitory, there will be no rental subsidies provided. Only a few workers rented a

house near the factory and the rent is about 300 RMB (43.21 USD) for a one bedroom one bathroom

apartment.

The metal framed beds in dorm


81

Air conditioner in the dorm

Personal Freedom

Workers are free to leave to go to the bathroom or for a drink of water and they do not need to inform the

team leader. Workers are free to enter and exit the dorm after work.

When the workers enter or leave the factory with a backpack or a box, they need to ask the security guard

for permission. The contents of the backpack will be checked by the security guard.

There is no information related to insults, physical altercations, or harassment.


Safety Equipment

There was a lot of ventilation equipment in the workshop. There were first aid kits in the workshop and

the dorm offices. The boxes are locked but can be opened. The emergency eyewash station is installed in

the workshop.


82

A sign showing first aid kits are available in the workshop

Emergency eyewash station


83

The injection molding workshop is an open-air workshop and there are fans installed. However, since the

tubes of the injection molding machine keeps dissipating heat and the injection molding workers have to

work there for more than 10 hours, they are constantly in sweat. The injection molding workshop

generates excessive noise and workers will need to shout loudly to communicate although they are sitting

face-to-face. The factory does not provide any hearing protection equipment to the workers and in the

long term their hearing ability may be affected. The paths are not blocked and the workplace is hygenic.

The workers operating the injection molding machines were exposed to thinner (No.740 in the factory)

which will irritate the skin-mucous. Workers will feel a slight tingling sensation when the thinner

splashes onto their arms, and workers will need to rinse their arms using water. The thinner is volatile and

the odor irritates the nasal mucosa which causes sneezing. However, the factory does not distribute face

masks or gloves for workers in the injection molding department.

The hot melt adhesive will emit a disturbing smell when the plastic material melts. When the machines in

the material room crushes the plastic materials, it generates fine dust which is harmful to the lungs.

Workers in the material department wear masks when working.

Workplace safety signs

The factory arranges free annual physical examination for workers, specifically for workers in the

material department and fuel-injection department. According to workers, there was a worker in the

material department who was diagnosed with tuberculosis a few years ago, and after that, workers in the

material department will resign within two years because they are afraid of developing the same disease.


84

Personal Protection Equipment

The factory does not take the initiative to hand out any protective equipment to the workers. During the

investigation, the investigator observed that all the injection molding workers worked with their bare

hands and on the last two days of work, the investigator saw a female worker who was operating a

machine was wearing a pair of long rubber gloves to protect her hands from being burnt by the products.

The gloves also helped protect her hands from being soaked in the cold water for a long time and prevents

the thinner from splashing onto her arms. The investigator asked the worker if she bought her own gloves

or if it was provided by the factory and she said that workers have to ask team leader for the gloves.

The factory does not take the initiative to distribute work uniforms. The investigator asked workers why

some workers were wearing work uniforms and others were not, and was told that workers had to ask the

manager for work uniforms if they would like to have a set. Work uniforms are free.

The flyer above lists the personal protection equipment as required for different positions in the

workshops

Environment, Health and Safety Committee

Workers have never heard of an Environment, health and safety committee and are uncertain if such a

committee exists.

Section 7: Fire safety

The workshop, the dorm and the emergency exits are clearly labelled and there was no debris blocking the

paths. The emergency exits are not locked. No flammable objects are stored in the factory and dorm areas.


85

The fire extinguishers in the factory and workshop areas are often carbon dioxide extinguishers and they

all had an inspection log on it. The factory holds a fire drill twice a year, once in the factory and once in

the dorm area. The main focus is the packaging department. The senior workers in the injection molding

department who spoke to the investigator did not participate in any fire drills, so it was not possible to

obtain any detailed information regarding the fire drills.

The fire hydrants in both the dorm and workshop had inspection log on it


86

Workshop hallways are unobstructed

Dorm hallway is unobstructed


87


The factory does not provide workers with an employee manual and does not inform workers of any rules

and regulations.

There is no information regarding rewards and penalties. The rewards include the overproduction reward

and full attendance reward.


Labor Union

There is a worker representative in the factory, but workers are unclear how he was elected. The factory

arranges for worker representatives to hold meetings with other departments to reflect problems.

However, these meetings serve no practical purpose as the issues discussed were usually left unsolved.

Workers were unclear of the exact date of meetings.

Name list of management level staff and workers representatives

Grievance Procedures

If a worker encounters any problems at work, they mainly reach out to the production team leader or the

office clerk for help.

The factory did not establish a worker’s hotline. No strikes occurred during the investigation period.

Section 10: Other


Foreign clients visited the factory in June and July this year and stayed around a month, but they only

inspected the injection molding workshop. The whole inspection lasted less than three minutes.


88

Worker satisfaction

The factory is near to the Chilling Industrial Zone. The overall salary is higher than the shoe factory next

to it. The injection molding workers can receive a monthly salary of a little over 4000 RMB (576.08

USD) when they are not absent from work and this is not enough when compared with their working

hours and how tiring the work is. Workers always say they are tired but they have no choice but to work

to survive. Some workers who had worked at a nearby shoe factory for 2 or 3 years and their wages were

only around 3000 RMB (432.06 USD) and in addition, they were frequently scolded by the team leader,

so they are satisfied with Lovable’s management and salary. They said that although they are exhausted

every day, they do not have to worry about being scolded, and the salary is enough to survive. They also

said that they have relatively more freedom at the factory, no one forces you to work more, no one is

arrogant, and if you want to earn more, workers can work faster. If workers are tired, they can work

slower, and they’ll earn a few hundred RMB less.

The working environment in the injection molding workshop consists of loud noises, a tiring workload

and limited rest hours, making it difficult for workers to endure for a long period of time. As such,

workers tend to consider resignation and switch to a different job after only working for a few months,

which results in the injection molding workshop having a high turnover rate. Not many workers can work

for more than a year in the injection molding workshop.

Investigator Journal

Before 7 in the morning, I got up to go to work. The cafeteria downstairs has instant noodles, steamed

buns, and rice porridge. At around 7:15, I quickly ate my food. Then, I arrived at the workshop and

clocked in. The group leader said we will have a meeting, so everyone formed two lines outside of the

workshop building.

The main issue discussed at the meeting was not to argue with the repairmen. These repairmen are

responsible for more than 10 machines. If, at the same time, there are 3 or 4 machines that need to be

repaired but there is not enough time to fix them, they might become irritable and they won’t be in a good

mood either. When this happens, the group leader urged us not to blame the repairmen or argue with

them. The entire injection molding workshop only has one person for repairs and maintenance. Currently,

there are a lot of new workers who aren’t so familiar with how to operate the machinery and they also

don’t yet have the ability to fix simple malfunctions on their own. The group leader explained that this is

the reason why the repairmen’s workload has increased. But, the salary bonuses and accommodation fees

of the injection workers are directly tied to how many pieces they produce. If a machine stops working

and the time waiting for it to be fixed is too long, inevitably, it will be difficult to fulfill the daily quota,

and it is very unlikely that you will receive the overproduction bonus. Therefore, workers hope the

machines can return to their normal functions quickly so they can finish their quota early. When the

machine experiences a malfunction, they feel irritated and m ay argue with the repairman who is also

feeling irritated. The group leader discussed this phenomenon at the meeting, said a few words to try and

alleviate this problem, and then announced the meeting was over and we should begin working.

When the meeting was over, I returned to the workshop and first went to the group leader to receive my

razor blade and sign my name. For most of the injection plastic products, you need to scrape the nozzle

and burrs, so a razor blade is necessary. But there is only a blade with no handle. When you use this type

of blade with your bare hands, it is pretty dangerous. Luckily, I have not yet seen someone injured from

using this tool. However, after using this blade for two days, my thumb was swollen because the back of

the blade kept pressing into my finger. In one day, the knife would press against my finger more than

3,000 times, repeatedly applying pressure to my finger and causing it to bleed. As a result, I was no

longer able to use the knife and had to tell the group leader. The group leader then proceeded to take a


89

large bandaid and had me wrap my finger with it to alleviate the pressure of the blade. But I would often

have to put my hand in water and the bandage would become heavy and slip off my finger. So my only

option was to rip the bandage into two parts: one part I wrapped around my thumb and the other part I

wrapped around the blade. I then used adhesive tape to wrap the bandages more securely. This way, there

wasn’t so much of the bandage on my finger and it wouldn’t slip off so easily when it got wet. Also, the

bandage around the blade prevented the blade from easily injuring my hand.

The injections workshop has 44 injection molding machines. Everyday about 20 are in use. One person

works with one machine: changing parts, water immersion, scraping the nuzzle and burrs, calibration,

arrangement, removal of bad parts, installation of trays. This whole process is all completed by one

person. The injection molding machine’s mold cycle is often around 30 seconds. So in 30 seconds, you

need to complete these four or five steps so time is very limited and generally, there is no time to rest. The

group leader does two or three inspections per day, looking at how much we have produced. The

repairmen also do two or three inspections per day and record the parameters of the machine. Quality

Control does one inspection per day, randomly selecting a finished product and testing whether it meets

the standard requirements. These inspections do not last more than one minute. The rest of the time is just

one person operating one machine nonstop.



90


There is no breaktime in the morning until we eat lunch at 11:30. There is only 30 minutes allocated to eat

lunch. When we eat, no one really chats with each other. We just silently finish eating as quickly as we

can. One time I tried to talk with another factory worker, but I felt we barely discussed anything

substantive before it was already noon! I had to stop eating, throw out the food I didn’t finish, and quickly

head back to work. I work 5 hours in the afternoon, from 12 to 5pm with no break. Generally speaking,

because there is no break in the afternoon, when 2pm comes around I start to get sleepy and usually yawn.

I even noticed that the previous worker who was at my machine wrote on the machine, “sleepy.” One

time, I was feeling sleepy while holding the blade and my mind started wandering. I accidentally cut my

left hand. Luckily, the cut wasn’t too deep and only a few drops of blood came out. After 2 days, the cut

was completely healed, but now I don’t let myself get sleepy during work. If I notice that I am starting to

feel a bit tired, I try really hard to refocus my attention. Generally, at around 3:30pm I gradually start

repressing my tiredness. At 5:00pm, we have half an hour to eat dinner.


91

Workers having lunch

At 5:30pm, we go back to work. It is a bit more relaxing at this time because if there were no problems

with the machines in the morning and afternoon, 90% of the production target would be completed

already. So, at this time, we can work a bit slower. Also, during the daytime, if the temperature is hot, the

workshop is scorching! At night time, though, the sun sets and it starts to become a little windy, making

the conditions more comfortable. At 7pm, the group leader comes to every machine and counts how many

products were produced. At 7:10pm, we return the blade and turn off our machines. After turning off the

machine, we clean the table and the area around the machine and wait to clock out. It is also only at this

time when factory workers chat together. There are also people who can’t help but feel tired and find a

corner to take a nap.


92

Workers chatting together

At 7:30pm, we get off work and can leave the workshop. We go back to the dormitory to take a shower

and that’s when I realized: my legs and feet were swollen and my right shoulder was aching. I asked a

few experienced factory workers: you’ve done this work for so long, is your body always swollen and

aching? They told me that at the beginning it was like that for them too. If you’re not used to standing 11

hours a day, your legs and feet will become swollen, but after half a month you get used to it. Your arms

and shoulders ache because turning on the machine requires a lot of strength and you have to open and

close the machine a few thousand times a day, so of course it will ache. They suggested I switch hands

when opening and closing the machine. Because we work more than 10 hours a day, and all of our time

and energy is spent very hurriedly, once we are done showering, the feeling of tiredness is overwhelming

and we immediately lie down and go to sleep.


93

Jetta (Guangzhou) Industries Co., Ltd. Investigative Report

Factory profile4

Founded in 1977 and based in Hong Kong, Jetta Company Limited is a leading Original Equipment

Manufacturer (OEM) in the toy industry. The company established subsidiary companies in Guangzhou

in 1983 and Jetta (Guangzhou) Industries Co., Ltd. was one of the many companies. Jetta (Guangzhou)

Industries Co., Ltd. is located in Conghua City, Guangzhou, and their production factory primarily

manufactures plastic toys, electronic toys, plus toys, toy blocks, small electronic appliances. Most of their

products are mainly sold to markets in the U.S., Europe, Japan, South-East Asia, amongst other regions in

the world.

Factory name: Jetta (Guangzhou) Industries Co., Ltd.

Address: No. 163 East Street, Cheng’ao Avenue, Chengjiao Neighborhood, Conghua City, Guangzhou,

Guangdong Province

Telephone number: 020-37996666

Contact: Ms. Luo

Products manufactured: Plastic toys, electronic toys, plus toys, toy blocks, small electronic appliances etc.

Brand companies manufacturing at Jetta: Hasbro, Mattel

Total number of employees: Around 6,000

4 Information found on Jetta’s official website: https://www.jetta.com.hk/index.php/company; recruitment website

jobcn.com: http://www.jobcn.com/cozone/20/99/209931/page/; and Baidu:

https://baike.baidu.com/item/%E9%95%87%E6%B3%B0%E9%9B%86%E5%9B%A2/10452294

https://www.jetta.com.hk/index.php/company

http://www.jobcn.com/cozone/20/99/209931/page/

https://baike.baidu.com/item/%E9%95%87%E6%B3%B0%E9%9B%86%E5%9B%A2/10452294


94

Total number of workers: Around 4,000

Number of workers during peak season: Around 6,000 (includes summer workers)

Male to female ratio: 1:8

Sources for the above information: Jetta (Guangzhou) Industries Co., Ltd employee handbook, factory

recruitment notice and information provided by workers

Number of interviewed workers: 16

Department interviewed workers were located in: Assembly department/Electronics department

Male to female ratio of interviewed workers: 7:9

Interview methods: face-to-face interviews, Wechat/QQ conversations. Workers did not know the identity

of the investigator.

Products manufactured at Jetta


95

Hasbro Baby Alive Real as Can Be Baby (Blonde Sculpted Hair)

Shipment record of Jetta in April shows that Jetta is still manufacturing products of Mattel.


Hiring policy

Hiring requirements

During the investigation period, the factory was recruiting large numbers of long-term workers.

Applicants were required to be aged 23 years or older.


96

（Hiring advertisement of Jetta）


97

(Hiring advertisements of Jetta)


98

Hiring Process

A notice with a “Jetta Recruitment Consultation” QR code was affixed to the window at the security

office located at the factory’s east entrance. After scanning the QR code, applicants are added to a Wechat

group. The following message was sent to the group: “Jetta Toy factory is hiring large numbers of long-

term staff. Interested parties should bring their original identification card and a photocopy, two one-inch

photographs, 35 RMB (5.04 USD) for the pre-job physical examination and a pen to the interview.

Applicants are to arrive before 9 AM during workdays (Monday to Friday) for an interview”.

(A notice for applicants: 1) Smoking is prohibited in the factory and sharp objects are not allowed to enter

the workshops 2) Under normal circumstances, wages will be paid through bank transfer each month, fees

required for a personal bank account or other relevant requirements shall be done according to the terms

decided by the bank 3) Minimum education level required: Junior High 4) Original document of the

applicant’s second generation identity card and a copy of it with both front and back printed 5) Two 1

inch black and white or color pictures 6) In good health condition 7) Eyesight requirement: Without

spectacles 0.8, with spectacles 1.0 and above. Note: 1. Applicants should bring a black pen along 2) The

factory does not take any fees.)

After two weeks, the factory provides new workers with work uniforms. The work uniform during the

summer, is a short-sleeved t-shirt, and in the winter, workers are given a vest to be worn on top of their

clothing. The factory provides workers with work uniforms once a year, for free.

Entry Methods

Direct hires, internal referrals


99

Position Assignments:

Workers cannot choose their own work positions. The line production manager assigns workers to their

positions.

Underage Workers:

During the investigation period, the factory was recruiting a large number of summer workers, with the

majority being high school graduates, and a small number were university students. Summer workers

resign from the factory at the end of August. During peak season, there were around 2,000 summer

workers.

The wages and working conditions for summer workers are the same as regular workers. The factory does

not have student workers from vocational schools. The majority of summer workers are high school

graduates, and are looking to earn some money to pay for their school fees or living expenses etc. There

are a small number of university students who are working at the factory to earn living expenses, or their

school has arranged for them to complete summer community service work.


Applicants undergo a pre-job physical examination, which mainly consists of a blood test and chest x-

rays. Any females who are pregnant or about to become pregnant cannot undergo chest x-rays, as this will

affect the fetus. Therefore, as these workers are unable to receive the results of their physical

examination, they will not be hired by the factory. Applicants pay for their own physical examination

which costs 35 RMB (5.04RMB). Workers do not receive a copy of the results of their physical.

The factory arranges physical examinations for workers once a year, which his paid for by the factory.


100

(Physical examination form and receipt)


101


Workers participate in a pre-job training which lasts for two hours. The training consists of signing the

labor contract; signing a confidentiality agreement and voluntary overtime form; distributing a manual

and handbook on the factory’s rules and regulations, occupational health and safety training materials,

ISO14001 environmental management system training materials; and completing a new employee

factory-level training test. After the training, factory staff will lead workers directly into the workshop.

Training is paid.

Probation period:

The probation period for new workers is two months.

Resignation:

Workers who wish to resign during the probation period must provide the factory with three days’ notice.

During the contract period, workers must provide the factory with a months’ notice. Workers obtain a

resignation form from the line leader, and after filling in the resignation date, the form is then submitted

to an upper-level staff for a signature.

Resignation Form


102

Workers must first undergo resignation and dormitory vacating procedures, and then submit a resignation

form and their factory card to the account department before they are able to clear their wages. Wages are

paid in cash or direct bank transfer. Workers receive their final wages around a week after their

resignation.

Factory staff will check the remaining balance on the worker’s factory card and refund the balance via

cash.

It is not difficult to resign. If the worker’s request for resignation is denied, they can go to the automatic

resignation machine outside the employee service point to print out a resignation form. The form is then

handed to a workshop clerk.


Signing Process:

The factory signs a contract with workers during training. The training instructor provides workers with

two copies of the contract, asking them to fill in the blank spaces on the cover, and to sign their name on

the first paragraph of the first page. Workers are also required to sign on the last page of the contract

which has Jetta’s factory seal and the seal of the legal representative. There is a sheet with supplementary

information about the labor contract which needs to be signed. There are two copies of the contact, and

both the factory and the worker retain a copy. The confidentiality agreement is attached to the contract

and is to be submitted along with a copy of the contract. The contact period is 2.5 years, and the probation

period is two months.

(Cover page of labor contract)


103

(Last page of labor contract)

Contract Terms

Workers have a copy of the contract, and the terms of the contract include: the contract period, work

description and location, work hours and vacation, labor remuneration, social insurance and benefits,

labor protection, labor conditions and occupational hazards protection, labor discipline, changes in the

labor contract, release and termination of the contract, violations of the responsibilities in the contract,

agreement on the service address of documents, disputes arising from the implementation of the contract,

others, and supplementary information about the Jetta Industries Co. Ltd. contract.


104

Left: Confidentiality agreement, Right: Confidentiality agreement after termination of contract

Contract terms on work description and location, work hours and vacation, labor remuneration, social

insurance and benefits.


105

Section 3: Working hours

Work hours (Hasbro assembly department)

(1) Peak and off-peak season work hours

Peak Off-Peak

Daily work hours 8-10.5 hours 8 hours

Weekly work hours 5-6 days 5 days

Monthly work hours 22-26 days 22 days

(2) Peak and off-peak season overtime hours

Peak Off-peak

Daily overtime hours 1.5-2.5 hours There is overtime on

some occasions.

Overtime does not

exceed 2 hours a day

Weekend overtime

hours

17.25-19.75 hours

Monthly overtime

hours

66.5-78.25 hours

Months with the longest overtime hours are June, July, August and September. The longest overtime

hours put in during a month was 80 hours. The factory will not arrange overtime for female workers who

are pregnant. Workers can choose not to work overtime, and they only need to verbally notify

management staff if they do not wish to. If workers do not work overtime, then they may have their

overtime hours cancelled on workdays and Saturdays, or be asked to resign.

(3) Working hours and rest time

Peak season (June, July, August, September)

Morning Afternoon

7:45-12:15；

Workers have a 10 minute break at10:30

Workers have a 60 minute meal break at

12:15

13:15-17:15；

Workers have a 10 minute break at 15:30Break at 17:30

for 5-6 minutes, workers finish work by 19:15

Off – peak season


106

Morning Afternoon

8:15-12:15；

Workers have a 10 minute break at 10:30

Workers have a 60 minute meal break at

12:15

13:15-17:15；

Workers have a 10 minute break at 15:30

Workers finish work at 17:15

Each assembly line has a production target, and the investigator is unsure about the specific targets.

Workers are asked to work as fast as possible, and to produce as many products as they can. Workers will

receive a reward at the end of the month for the amount of products manufactured which exceeds the

production target.

The factory records work hours via a time card, and workers are required to line up for around 2-3

minutes to swipe out at the end of their shift. The time spent lining up is included in the work hours. The

work hours recorded are complete, and workers can enquire with workshop staff about any errors.

There are no meetings before or after work.

Personal freedom

During work hours, workers must use the bathroom and drink water during the designated rest periods.

After work, workers are free to move around the dormitory, and are not searched when entering and

exiting the factory.

Section 4: Labor remuneration and benefits

Wages:

(1) Wages (Hasbro assembly line):

During peak season, workers earn 2,900 – 3,500 RMB (417.73 USD – 504.16 USD) on average a month

after social insurance contributions are deducted. During off-peak season, workers on average earn less

than 2,000 RMB (288.09 USD) after deducting for social insurance contributions.

Wages include: regular wages, sick leave wages, overtime wages, monthly reward, technical allowance,

medical compensation, night shift allowance, special allowances, allowance for working under high

temperatures, wages for working on a rest day, other compensation, pension contribution, unemployment

insurance contribution, medical insurance contribution, fees for the housing provident fund, dormitory

fees, taxes, actual amount of deductions.

Workers earn a base wage of 2,100 RMB (302.49 USD) which is based on an hourly wage of around 12

RMB/hour (1.73USD/hour). Overtime hours are calculated according to an hourly standard of 12.07

RMB (1.74 USD) x 1.5, and overtime on weekends according to an hourly standard of 12.07 RMB (1.74

USD) x 2. For overtime hours on statutory holidays, wages are paid according to an hourly standard of

12.07 RMB (1.74 USD) x 3.


107

The recruitment notice advertises wages of 4,300 RMB a month in the assembly and electronic

departments, of which 1,667 RMB (240.12 USD) is overtime wages. However, workers will only earn

1,667 RMB (240.12 USD) in wages if they work 22 days a month with 2.25 overtime hours a day and put

in 8 overtime hours on Saturdays. Workers must work 81.5 overtime hours to earn 4,300 RM (619.39

USD), and mentioned that whether it is peak season or off-peak season, it is impossible to earn this

amount.

(Recruitment notice advertising how wages are being calculated)

Payment method

The factory distributes the previous month’s wages before the 10th of each month. Workers receive their

wages directly from the factory. Workers are given a pay stub which lists the wages to be paid, and the

total deductions. The actual wages workers receive matches the amount shown on the pay stub. The pay

stub and attendance records are the same.

The categories listed on the pay stub include: pension contributions, unemployment insurance

contributions, medical insurance contributions, housing provident fund, dormitory fees, other deductions,

taxes, actual amount of deductions, leave, and absenteeism. If workers are absent for more than three

days, then they would be regarded as having voluntarily resigned. Some workers say that after they

voluntarily resign, wages would be paid 15 days after the worker has left the factory. Some workers say

that the factory would call the worker who voluntarily resigned, to return to the factory to undergo

resignation procedures and to receive their wages.


108

Paystub

A message from bank saying wages has been deposit into the investigator’s bank account

Leave policy

Sick leave is paid, and workers must ask the product management staff for a sick leave form and also

submit a medical certificate.


109

If asking for sick leave and the worker has a sick note and the receipt from their doctor’s visit, their wages

will be deducted around 50%. A worker receives no wages if they miss work or take regular leave and if a

worker misses three days of work in a row, they will be considered as having quit. Some workers said that

after quitting, wages would be paid after 15 days, while other workers say that even if the worker quit, the

factory will call them and ask them to return to the factory to submit their resignation forms and retrieve

their wages.

The factory has paid annual leave, maternity leave, marriage leave and funeral leave. Workers must

provide advanced notice to product management staff prior to taking leave, and also ask for a leave

request form. Maternity leave is paid according to related labor laws. A female worker from the

electronics workshop mentioned that the assembly line she works on, allows workers to submit a leave

request form after they take annual leave.

Holidays:

Legal holidays are not paid.

Social insurance:


110

Notice on 2018 social insurance contribution base and housing provident fund deposit ratio

The factory purchases social insurance for workers. The amount each worker pays in social insurance

contributions is different, as different departments have different wages. The table below shows the

amount workers in the Hasbro assembly department pay for different categories of social insurance.

Type of insurance Amount (Hasbro assembly department)

Pension 277.52 RMB (39.98 USD)

Unemployment Approximately 4.2 RMB (0.60 USD)

Medical 98.62 RMB (14.21 USD)

Work injury, maternity The factory pays for work injury and maternity insurance.

Investigator is unsure of the actual amount paid

Housing provident fund 105 RMB (15.12 USD)


The factory has a library, television room, karaoke room, soccer field, basketball court, dance studio,

indoor gymnasium, table tennis table, and a bulletin board.


111

Bulletin board stating the working hours for entertainment facilities in the factory.

Soccer field


112

Karaoke room

The factory has many entertainment facilities. There is an indoor gymnasium, an outdoor basketball court,

soccer field, table tennis table, a television room, library and dance studio. There are also activities such

as the mobile game competition. However, it is not difficult to see that the majority of workers who play

basketball or soccer are summer workers. Those who watch T.V. in the television room, are

predominantly male workers who are aged 50 and older. Other than on the odd occasion when a few

female workers would dance in the dance studio, female workers are hardly seen using the entertainment

facilities. Even though the mobile game competition appears to be very lively, the majority of those who

participate are summer workers. Female workers are only interested in the free dessert offered during the

competition. Although the factory has many entertainment facilities, few female staff are interested. One

female worker mentioned that she had never participated in any of the activities organized by the factory.

She only comes to the factory to work.


113

Mobile game competition

The factory has a sick bay, and to purchase medicine, workers are required to swipe their factory card.

Workers say there have been cases where female workers who have high blood pressure or are anemic,

have fainted on the assembly line. Workers who are sick are first taken to the sick bay, and if their

condition is serious, security will call the 120 emergency number.


Dining Conditions:

The factory provides meals for workers. Breakfast costs 3 RMB (0.43 USD), whilst meals during lunch

and dinner costs around 5-7 RMB (0.72 USD-1.01 USD). Workers say meals are cheaper in the factory

compared to purchasing food outside.


114

Menu with price tag

Canteen where workers are lining up for food


115

Canteen staff preparing meals for workers

Workers can choose whether they would like to live in the dormitories and purchase meals at the factory.

If they choose not to, no deductions will be made to their wages. The factory’s recruitment notice says

“Workers who began working at the factory between June 9 – June 25, will receive a dormitory stipend

for three months (40 RMB (5.76USD) a month)”. Other workers do not receive a dormitory stipend.

Workers do not receive any meal stipends.

The factory cafeteria is relatively clean, and before purchasing meals, workers must top-up their factory

card, and swipe the card when purchasing meals. The cafeteria provides bowls, and workers bring their

own spoons. After eating, workers must place their bowls in the cutlery bucket. Some workers choose to

bring their own meals to the factory.

Dormitory conditions:

Each dormitory room houses four workers, and the rooms are equipped with fans and cupboards.

Including utilities, dormitory fees are 40 RMB (5.76USD) a month. Showers and bathrooms are shared by

workers on each floor. There are 10 showerheads in the shower room, however, there is no hot water and

the cold water is very dirty. Each time a worker showers, they must fill a bucket of hot water outside the

cubicle.


116

Dorm room


117

Shower room

Workers can fill up hot water here. The notice posted servers as a reminder that workers should not waste

water and do not use hot water to wash their clothes as hot water is limited.


118

Each floor of the dormitory has a break room, and the second floor has a washing machine. Workers say

that the washing machine has been broken for many years, and no one has fixed it. The dormitory second

floor has a kitchen where workers can cook.

If workers are taking a bus to and from work, a one-way ticket costs 2 RMB (0.29 USD).

Poster regarding the Jetta bus. The bus is available on weekdays and is 2RMB (0.29 USD) for a one way

ticket.

A female worker from the electronics department was directly recruited into the factory in June, and prior

to 2008, was working at Jetta Guangzhou’s Baiyun factory. The worker is married, has two children, a

nine year old son and a two year old daughter. She and her husband work in Guangzhou, and the

grandparents look after the children. Before coming to work at Jetta Guangzhou, the worker was looking

after her children at home. The worker lives at the factory dormitories, and during the weekends, goes to

her husband’s place of employment which takes around 30 minutes by public transport.



The factory does not have an environment, health and safety committee. During the pre-job safety

training, the instructor distributes a copy of the job safety manual and an ISO14001 environmental

management system training manual. New workers also took a factory-level training exam, which lasted

for around 20 minutes.


119

Job safety manual

ISO14001 environmental management system training manual


120

ISO14001 environmental management system training manual

The test paper for the factory-level training exam


121

Labor Protection:

The workshop is much cooler than the outside of the factory. There are fans and ventilations, and

corridors are unobstructed. Workers mentioned that lathe operators and those in the spray painting

positions are required to wear protective equipment. However, the oil and glue that workers come into

contact with have been tested previously and are harmless to the body.

Every year, the factory pays for workers to undergo a physical examination. Workers who are in contact

with toxic chemicals are required to undertake an occupational disease examination prior to resigning

from the factory to determine that they do not have an occupational disease.

In the injection molding department, workers are required to wear ear plugs, as the workshop is

particularly loud.

The dormitory has a first aid box which includes rubbing alcohol, eucalyptus oil, cotton buds, bandages,

Zheng Gu Shui, scissors, gauzes, disposable gloves etc. The first aid box is unlocked, and workers must

record the items they have used.

First aid box


122

Items inside the first aid box, contains rubbing alcohol, eucalyptus oil, cotton buds, bandages, Zheng Gu

Shui, scissors, gauzes, disposable gloves etc.

Work injuries:

There are work injury incidents at the factory, however, work injuries occur infrequently, around once or

twice a year. The main reason for work injuries are: workers not concentrating when operating the

machines; improper use of machines, the workshop does not provide workers with job safety training,

equipment needs to be updated, the workshop did not implement 5S management, workers do not have

enough job safety knowledge, workshop lacks sufficient oversight. There was a worker who mentioned

that a few years ago, she saw a female worker who turned to speak to the worker next to her, and as she

was not concentrating, her finger was cut by the machine. Afterwards, the female worker was taken to the

hospital, and after treatment, her finger had become disabled. The factory compensated the worker 30,000

RMB (4321.34 USD).

The investigator was assigned to a station that ties ropes to small components. The component is quite

small, and the rope is relatively thin. After a morning’s work, the investigator’s fingers, nails, joints of the

thumb and forefinger were in pain, and there were scars between the knuckles as they had been tying the

rope all day. Workers advised the investigator to wrap tape around the fingers.

Another work position required workers to attach furs to the dolls. Workers would use bandages to wrap

their forefinger, middle finger and thumb on both hands, as they have to continuously use both hands very

quickly which is extremely painful. There were some workers whose fingers were in a lot of pain that

they couldn’t sleep soundly at night as they would be woken up by the pain.


The workshop and dormitory corridors and emergency exits are clearly marked, with sufficient lighting

and are unobstructed. The workshop and dormitories have fire extinguishers.


123

Every year, the factory organizes two fire drills, in May and October, and they take place in both the

production areas and dormitory areas. Each fire drill lasts for 30 minutes. Peak season is between June

and September, as such, there are no fire drills.

Unobstructed stairways


124

。

Unobstructed hallways in the dorm

Fire extinguisher and fire hydrant located inside the factories

Section 8: Rewards and Punishments

“Rewards and punishments” are clearly set out in Chapter 13 of Jetta (Guangzhou) Industries Co. Ltd.

rules and regulations. The rewards are a commendation, recording a merit, salary increase and promotion.

The punishments include a written warning, demerit points, and termination of the labor contract. In

reality, the punishments workers usually receive include having their overtime hours cut, or being asked


125

to resign. If workers are working too slowly, or are unwilling to work overtime, then their overtime hours

in the future may be cut. There was a female worker who had a stomach ache for two days straight, and

after applying for leave with the production manager, was asked to resign.

Rewards and punishments


The factory has a union and worker representatives. Workers say that the worker representatives are

recommended by the workshop manager or personnel. The factory union holds a meeting once every two

months, and each meeting lasts for one hour. The most recent meeting was held at the end of July. When

the meeting started, worker representatives reflected on the feedback from workers, such as when new

workers would receive social insurance cards, when the base wage would increase etc. The employee

service point board has Jetta (Guangzhou) Co. Ltd.’s worker representative chart and union committee

chart. Of the 12 worker representatives, there is one male representative, the rest are females. The male to

female ratio is 1:11. The union committee has 11 individuals, and the chairman and vice chairman are

male. The two production committee members and one organizational committee member are male. The

recreational committee has one male and one female, and the remaining two committee members and the

two finance committee members are female. The male to female ratio is 6:5. The union’s phone number is

87996666. However, when the investigator called the number, the response was: “The number you are

calling is currently unavailable, please try again later.”


126

(Poster regarding worker representatives of the labor union)


127

(Election results of the labor union)

There is a hotline at the factory, and the number is 37996666, Ext. 8292 The hotline accepts calls every

Thursday from 5.00 PM to 7.00 PM. However, during peak season, workers usually work overtime until

6:45 PM or 7:15 PM. When workers wanted to call the hotline, the hotline staff have already finished for

the day. Members of the care team also speak Cantonese, and there are a portion of workers at the factory

who do not speak Cantonese. The factory has a CH production department, and the service number for

that is: 37996666-8661. The factory has a “care team”, with three staff members on the team, Li Meixian

(Contact number: 020-39303936), Huang Jinxi (Contact number: 020-3930393, QQ: 978583369), Lin

Runbi (Contact number: 020-39303937, QQ: 859661280).

There is a suggestions box by the cafeteria entrance, however the suggestions must be related to work

health and safety, environmental protection, anti-terrorism, or intellectual property rights.


128

Care Team’s contact information

Section 10: Other

Workers choose to work at this factory because: (1) They are of an older age, and it is difficult to find

work (2) The wages are paid on time (3) It is easy to resign (4) The factory purchases social insurance for

workers, there is paid leave, and every month, the wages earned are enough to sustain a basic standard of

living.

Interviewed workers mentioned that they hoped to earn 4,000 RMB/month (576.18 USD/month) before

social insurance contributions have been deducted. However, even if it is peak season, after deducting for

social insurance, the majority of workers earn between 2,900 RMB – 3,500 RMB/month (417.73 USD –

504.16 USD). Workers look forward to working overtime on weekends or legal holidays. They believe

that working 1.5 to 2.5 hours of overtime everyday during peak season is acceptable.

Interviewed workers say that although their hands ache when working, they hardly come in contact with

toxic chemicals, and there are also not many work injuries. Workers are generally satisfied with the

overall work environment.

If workers take the bus home everyday, they would spend around 100 RMB (14.40 USD) in

transportation each month. Renting an apartment outside the factory costs 200 RMB/month (28.81 USD),

and if they live in the dormitories, the fees are 40 RMB/month (5.76 USD) Every day, workers spend 30

RMB (4.32 USD) on meals. Basic living expenses each month total 1,500 RMB (216.07 USD).

Regarding the factory’s management system, workers think that the quality of management along the

assembly line is low. There was a female worker who spoke back to a production management personnel,

and was sent to the most laborious work position. There was a female worker who was working too

slowly and was also sent to the most tiring work position. There was another female worker who applied

for leave because of a stomach ache, and was asked to resign. There are two workshop managers in the

Hasbro A7 production workshop. The male manager is the supervisor, and the female is the deputy


129

supervisor. Workers mentioned that if there are any issues, they would speak directly to the male

manager, as he has more decision-making power.

Female workers aged between 30-40 years old feel that the wages are too low during off-peak season, and

they aren’t able to earn much. They plan to move to another factory with higher wages when there is an

opportunity. For female workers aged 40-50 years old, they feel the factory makes contributions to the

five social insurance categories in addition to the housing provident fund, and have never owed wages to

workers. As such, they are generally satisfied since working at the factory allows them to maintain a basic

standard of living.

Investigator’s Journal

July 24, 2018

I started working at 8:15. My job today was to attach furs onto dolls. This work position has a total of 7

people. The group leader requested each person to make 40 dolls an hour and that today the workers

would be the one keeping track of their own production amount. If the worker didn’t make enough dolls

then they wouldn’t be allowed to work overtime. The work position of attaching furs onto the dolls was

too tiring. We needed to use a lot of force and have to continuously use all ten fingers without rest. Many

workers who attached furs to the dolls would use bandages to wrap up their pointer finger, middle finger

and thumb on both hands, as continuously using both hands very quickly is extremely painful and by

wrapping them, it is less painful.

After an hour, the group leader took out a form and stood next to me and counted how many dolls were in

the box next to me. She told me that I didn’t make enough dolls and to think to myself what I should do.

She said even if she wasn’t going to schedule overtime for me, I shouldn’t move so slowly and wait

around until the end of my shift. Every assembly line has a daily production amount (the wages for the

management of every production line is dependant on the production amount. If the production amount

exceeds the quota, there will be a bonus. The higher the production amount, the higher their wages.) so I

needed to work faster and not slack off. The group leader required the workers on the positions of

attaching furs to dolls to make 40 dolls in an hour. However, as many workers in that position had only

worked for a day or two, many of them could only make 25 or 26 dolls an hour. The group leader next to

us kept pushing: “faster, come on girls! Faster boys!”.

Worker with bandage wrapped on their fingers


130

At around 12:15 PM, I went to eat in the cafeteria. The cafeteria’s menu was posted on the glass of the

window. The food offered everyday was the same. I bought two dishes and one rice bowl at the steamed

dish window and spent 6.50 RMB. The cafeteria provided breakfast, lunch and dinner so long as the

worker purchased meals in the specified times, then the worker would be able to purchase meals. The

factory’s food was cheaper than the food offered outside of the factory and was also cleaner.

Workers waiting in line for food

At 1:15 PM, I returned to the production line and continued to work. The group leader and production

manager continued to push us: “work faster, you can’t work this slowly.” When it was almost 5:15, the

worker next to me, Mo (who started work the same day I did), told me that he didn’t want to work

overtime but the group leader wanted him to work overtime but didn’t want me to work overtime. I said

that I wanted to work overtime, as working overtime was the only way I can increase my speed. The

group leader said opportunity was something a person needed to take for themselves, it is not something

that can be given to them. If I wanted to work overtime, I needed to work faster. She said since Mo didn’t

want to work overtime, then I could work overtime instead but I would need to work faster. Some time

past 6:40, workers from another assembly line had been transferred over to the position of attaching furs

to dolls and sat directly across from me. She was transferred to help us on this line and she was a summer

worker. She was very fast at attaching furs to dolls and could finish a doll in a minute and a half, while I

took three to five minutes to do one.

I told her that I thought she was incredible. She said that she was forced to work so quickly. The

production line she was originally on also implemented a system where workers recorded their own

production amounts. Each person needed to make 40 products in an hour; if the worker didn’t satisfy the

quota, then they wouldn’t be allowed to work overtime. Because of this, she had no option but to work as

fast as she could to make the dolls. She said that there were women on her production line who could

work even faster. Some of them could make 50 in an hour. She told me that she had been working at the

factory for over a month now and during that time, had always been attaching furs to dolls. Now, when

she works, she has to bandage all ten of her fingers, otherwise her fingers hurt too much. She also told me

that on the production line she was on, there were some workers whose fingers hurt so badly that they


131

couldn’t even sleep soundly at night and would be woken up by the pain. The worker who came to help,

at 7:15, with two minutes left in the shift, returned to her assembly line. She had only worked for twenty

minutes but the goods that had piled up in front of me were completely finished by her.

Today’s shift ended at 7:15. With two, three or five minutes left in the shift, the summer workers on the

assembly line had already left their work positions and were lining up, waiting to sign out. At 7:15,

everyone was able to leave on time. Yesterday everyone got out of work at 7 PM. The summer workers

who left work at 6:45 yesterday were reprimanded by the production manager this morning. The

production manager said if you don’t want to do the work, then don’t come. If you don’t want to do this

job, there will be others willing to do it.

Workers in line to clock in/out

The group leader would always threaten to not let the workers, who work too slowly, work overtime. The

products that are made in excess of the quota will be rewarded with a bonus. Therefore, the group leader

will constantly push workers to make more products for the purpose of exceeding the quota. If a worker

didn’t want to work overtime, they would need to notify the production manager in advance.

August 1, 2018

Today at 7:40 AM, I started working. My job today was still to put furs on dolls. The worker sitting next

to me (Xie M.) told me that both her hands hurt terribly and her right hand’s index finger was swollen.

She showed her left and right hand to me to show the difference and it was indeed very obvious that her

left hand’s index finger was more swollen than her right hand’s index finger. The worker next to me who

was on the same work position had already been putting furs on dolls for three days and she said her

hands hurt too, to the point where she didn’t want to work. After working for 15 minutes, my speed


132

dramatically slowed down because of how much my hands hurt. Afterwards, both my hands were

completely numb and I was able to work much faster. In the first hour I made 30 days; in the second hour

I made 35 dolls. However, afterwards, even though I was mentally telling myself to work faster, work

faster, my speed couldn’t increase by much. The more I worked, the less dolls I was able to complete. At

4:20 PM, the group leader said that the number of dolls I made had decreased so I wouldn’t be allowed to

work overtime. I said fine, because my hands were hurting to the point of spasming. I told the group

leader that I didn’t want to work overtime but I would try to finish 40 dolls within an hour tomorrow. The

worker across from me, Xie M., said she also didn’t want to work overtime. She wanted me to continue

working overtime so that she didn’t have to. I jokingly told her she was an indispensable worker as she

worked very quickly so she had no choice but to stay and work; I worked too slowly, which is why I was

qualified to not work overtime. Before work finished, I worked as quickly as possible to finish the

remaining dolls in the box. I told the group leader I had finished before I left the workshop. The other

workers had to work overtime until 7:15 PM.

Investigator’s swollen finger

After work, on the way to the dorm, I took an hour long nap on my bed. At around 6 PM, Ying returned

to the dorm to eat. She used her own electric slow cooker to boil some winter melon and rice. I chatted

with her and told her how badly my hands hurt and how they felt like they were spasming. Ying said that

working in a toy factory is extremely hard on the hands. While there may be no occupational hazards, a

worker’s hands will be put under a lot of stress. She said that the assembly department was slightly better.

Workers in the injection department had to wear ear plugs because of how loud the machines were. I

asked her if there were more men in the lathe operator and oil injection work positions that received

bonuses. She said that those work positions had both male and female workers. When working at either of

those work positions, the worker would need to wear personal protective equipment and their clothes


133

would get very dirty. When workers in those positions resign, they must undergo a physical examination

to make certain that they do not have any occupational diseases before they are allowed to leave the

factory. The chemicals that those workers come into contact with are not toxic because the oils and glue

have all been previously tested. I asked her if the factory had arranged physical examinations for workers

and she said that are physical examinations once a year and that they are free. However, when starting at

the factory, the first physical examination must be paid for by the worker and afterwards, the annual

physical examination is paid for by the factory. Ying said that two weeks after new workers start working

at the factory, they will all receive their work uniforms. The summer uniform is a short sleeves shirt and

the winter uniform includes a tank top that is worn over the worker’s clothes. Excluding for these, work

uniforms will be handed out once a year and workers are not charged. She said that she had worked at the

factory for 16 years so her annual leave was 15 days in length. The longest she can take rest for is a

week’s time. I said that when I got off work, I saw a pregnant woman also leaving work. She said that

pregnant women are not allowed to work overtime and can only work 8 hours each day. Maternity leave

is scheduled in accordance to the factory’s regulations.

At around 8 PM, another worker named Huang H. returned to the dorm. She said that she had to work

2.75 hours of overtime today. She started work at 7:30 AM and got out of work at 7:15 PM. She felt

exhausted working an extra half hour of overtime each day but the factory wasn’t arranging overtime for

workers this Saturday. I said if the factory cancelled overtime during the workweek and scheduled 10

hours of overtime for Saturday, wouldn’t wages be much higher that way? She said that the factory

definitely wouldn’t do that.

The female workers at the factory generally only care about going to work, leaving work and any other

matters are of little importance to them. I asked quite a few people what the labor union at the factory

does but their expressions revealed they were at a loss. Every day, during our break time at 5:30, there

were some female workers who would eat cookies, bread or fruit in the water dispenser room, as working

required exerting a lot of physical effort. After they finished eating, they would continue working

overtime. Every day, at around 6 PM, many people would be clearly exhausted. This afternoon, the group

leader told me that I had filled out my resignation date as Thursday but I wouldn’t be able to file for

resignation on Friday and would have to wait until the Monday after next. She suggested that I change the

date to be next Wednesday as that would make resignation more convenient. I asked her if I could trouble

her to help me change it then.

The factory requires workers pick up a leave request form when asking for leave. If asking for sick leave

and the worker has a sick note and the receipt from their doctor’s visit, their wages will be deducted

around 50%. If a worker misses work or takes regular leave, then they will receive no wages. If a worker

misses three days of work in a row, they will be considered as having quit. Some workers said that after

quitting, wages would be paid after 15 days, while other workers say that even if the worker quit, the

factory will call them and ask them to return to the factory to submit their resignation forms and retrieve

their wages.

The workshop is somewhat cooler than the outside, as there are electric fans and ventilation equipment.

Some work positions can be reached by the fans so the workers at those positions do not feel overly

warm; however, some work positions cannot be reached by the fans, for example, the work position of

putting furs on dolls cannot be reached by fans and, on top of that, are pushed to work faster. Workers at

that work position are constantly complaining how hot it is. Every day that I put furs on the dolls, my

back ends up soaked in sweat.

The factory’s employee service area has a wall that has a poster displaying Jetta’s worker representatives

and labor union committee members. Of those worker representatives, which there are 12, only one was


134

male and all the rest were female. There are 12 labor union committee members. The chairman and vice

chairman are male, three production committee members and one organization committee member is

male. The promotional material committee has one male member and one female member. The remaining

two female worker committee members and the two financial committee members are female. From this,

it can be seen that even though 80% of the workers at the factory are female, but the high-level leadership

at the union is still majority male.


135

Herald Metal & Plastic Works Ltd. Investigative Report

Company Profile5

Herald is a diversified industrial group whose products are distributed around the world. The Herald

Group has many divisions, such as the toys, houseware, computer products, and timepieces divisions.

This company has operations in Hong Kong, Mainland China, and the United Kingdom.

Herald Metal & Plastic Works Limited was established in 1969. It has two factories in Mainland China

employing over 6,000 workers in Dongguan. The factory and dormitory facilities comprise a total of 1.3

million ft2.

Herald Metal & Plastic Works Limited is a leading toy company in Hong Kong specializing in the

manufacture of a wide range of toys including action figures, electronic radio-controlled toy cars and

boats, electronic games and preschool toys.

Factory Name: Herald Metal and Plastic Works Limited

Introduction: Herald Metal and Plastic Works Limited is the operating company of the toys division under

Herald Group of Hong Kong. The company primarily manufactures and sells plastic toys, electronic toys,

dolls, plastic products, kitchen hardware and metal hardware mold. Factory Address: Bu Xin San Road, Shi Pai Town, Dongguan City, Guangdong Province, China Postcode: 523338 Contact Information: Guo NanPu (86) 0769-86551728 Email Address: [email protected] Brand companies manufacturing at Herald: Disney, Hasbro Total number of employees: Approximately 3,000

5 Information found on Herald’s official website: http://www.heraldgroup.com.hk/profile.htm and

http://www.heraldgroup.com.hk/sc/profile.htm

http://www.heraldgroup.com.hk/profile.htm

http://www.heraldgroup.com.hk/sc/profile.htm


136

Male to Female Ratio: Approximately 1:5 Number of workers interviewed: Approximately 30 workers Male to female ratio of workers interviewed: 1:5 Department interviewed workers were located in: Injection Molding Workshop Interview methods: Anonymous face-to-face interviews

Products manufactured at Herald

Hasbro and Disney


137

Star Wars Force Link Starter 2.0

Disney Mickey Mouse


138

Hasbro

Hasbro


139


Hiring Policy

Hiring Requirements: There is a banner hanging outside of the factory reads: Herald Metal and Plastic Works Limited is

recruiting many types of regular and skilled workers with high pay.

Banner outside of the factory

According to Herald’s hiring advertisement online, there are no gender restrictions. Applicants must be

between the ages of 16-45 and have an identification card. They must also be healthy, willing to comply

to orders, hardworking, and able to endure pressure.


140

Herald’s hiring advertisement online

Hiring Process:

Outside of the southern gate of the factory, there is a hiring notice posted on the wall. Outside of the main

entrance there is also a recruitment banner. Applicants can go to the south gate to read the advertisement

and learn more about the position. The factory arranges for a recruiter to be by the south gate to greet

applicants. The recruiter asks them: what position do you want to apply for, where are you coming from,

do you have any acquaintances working here, is it your first time coming to Shipai, what sort of work

have you done before, can you work night shifts? After applicants respond, the recruiter brings the

applicants to the training room inside the factory. There, they fill out a personal information form and a

work history form. You also need to declare that you have never committed any crime. Then, the

applicant needs to provide two passport-sized photographs and two copies of their ID. After filling out the

forms, the recruiter calls the relevant department manager down to the training room to carry out the

second interview with the applicant. At the time of the investigation, there were three other applicants

waiting to be interviewed: a young woman interviewing for the inspection or warehouse departments, a

middle-aged man interviewing to work in the injection molding department, and a young man

interviewing to be a molding apprentice. The worker informed the applicants that they should be punctual

in arriving to the training room tomorrow at 8:00 AM to sign a labor contract.


141

Workers in the training room

Workers signing forms


142

The next morning at 8:00 AM, the applicants arrived at the training room. The recruiter handed out a few

forms for workers to look at: workers’ liability form, letter of commitment, training registration form, and

two blank contracts. The recruiter gave the applicants about 15 minutes to look over these documents and

then told them to sign the above-mentioned forms. After several minutes, the recruiter handed out an

application for a Bank of China card. This card acts as the factory’s wage card. After everything was

signed, the recruiter collected all the documents.

Left: Workers’ liability form; Right: Letter of commitment

At 9:00 AM, an office worker from the personnel office next door came by. Applicants were given a

factory ID and signed a list confirming they were given an ID. According to the list, only one worker

joined the factory that day. Then, applicants went to the personnel office to record their fingerprints. After

doing this, the office clerk gave a call to a worker from the workshop to come to the office. After waiting

a moment, the workshop worker came to the office and brought the applicants to the workshop. Then the

workshop worker took out a few forms for the applicants to sign. The top part of the form was covered by

the office clerk’s notebook, as such, applicants weren’t clear what exactly they were signing. After

signing, the office worker introduced the workshop procedure for clocking in and out, how to use the time

recorder, and the times for clocking in and out. Afterwards, the office worker left and applicants waited in

the workshop to be assigned work.

Entry Methods:

Workers generally enter the factory through direct hires or internal referrals. Summer workers are mainly

referred by labor agencies.


143

Position Assignment:

The applicant tells the recruiter which position they are interested in. After filling out the forms and

handing in the photos, the recruiter will make a call to the manager from the relevant department and have

them come over to conduct a second interview in the training room. The questions asked by the manager

are almost the same as the recruiter. After the interview, the manager signs his name on the applicant’s

personal information form to give them permission to begin their probationary period.

Underage Workers:

There were no student workers as the investigation period was not during winter or summer vacation.

According to workers, the factory recruits a large number of student workers through labor agencies

during the summer and arranges most of them in the packaging department with an hourly wage of 10

RMB (1.44 USD). There are also workers in the factory who introduce their children or relatives into the

factory to do summer work, and the wage is the same as regular workers.

Details regarding pay per hour

Physical Examination: There is no pre-job physical examination. The factory pays for the physical examination for all staff every

six months. The most recent physical examination was on September 13th.


144

Notice regarding timetable for physical examination


The factory does not provide any pre-job training or on-the-job training. Although workers are given a

training attendance sheet to sign in, no actual training is provided.

After a week of work, the workshop leader brought in a few training attendance sheets for workers to

sign. The training attendance sheets include: ICTI documents and periodic disciplinary practice training,

counterterrorism safety training, standard production safety management procedure training, Guidelines

for Herald factory’s safety and quality training, fire safety training, and controlling sharp tools training.

The workshop leader went to each worker at their job station and asked them to sign each training

attendance sheets. However, the actual trainings were never provided.

Probation:

The probationary period is three months.

Resignation

If a worker resigns during the probationary period, the worker would need to notify the factory 20 days in

advance.

An applicant showed the contract to the recruiter and said: “In the 4th clause of the 8th section, it says

that we only need to inform you 3 days in advance.” The recruiter replied, “that is regarding you giving

notice, but you still need to wait for the factory’s approval. The factory’s regulation is 20 days.” This rule

breaks the law.


145

The factory sets two resignation procedure days each month. The specific date is not fixed and is usually

the second and fourth Friday of the month. The factory will send the dates to the offices every month, but

will not be initiatively conveyed to the workers. Workers can apply for resignation only on these two days

whether during the probationary period or contract period. This resignation rule violates the law and does

not comply with the fourth section of Section 5 of the basic rules and regulations, “Dismissal of labor

contracts and procedures for leaving the factory,” Article 4 which states, “new employees, who wish to

resign during the probationary period, should notify the personnel department three days or more in

advance in written form.”

On the day before resigning, the worker needs to return the work clothes and sleeves the factory lent them

to the workshop office. The workshop clerk will issue an employee work transfer sheet. On the

resignation day, the worker needs to pack all their things before 10:00am, put their luggage in the

dormitory management office, return the dormitory key, give the work transfer sheet to the dormitory

general affairs and security offices to be signed, and get a luggage release note.

At 2:15pm, the workers take turns going to the training room to settle their salary and sign the payroll.

The wages for the month of resignation and the prior month will be a one-time settlement in cash. After

that, the worker can go to the dormitory management office to take their luggage and hand the luggage

release note to the security guard. The security guard asks the worker to open the luggage for inspection

before allowing them to leave.

Notice on dismissal of labor contract


146

Employer work transfer sheet

Luggage release note

About 25 people resigned the same day the investigator did, and the turnover rate was about 1%.


147


Signing Process:

Through the course of the signing process, the contents of the contract were not explained by anyone.

There were also no explanations to the blank sections of the contract. The factory takes away the contract

once it is signed and fills in the blank sections later. The contract will be returned to the worker during the

second month of employment.

Labor Contract


148

Labor Contract

Contract Terms:

The articles in the labor contract include: length of contract term; job description and location; work hours

and vacation time; labor remuneration; social insurance and benefits; labor protection; working conditions

and protection from occupational hazards; changes to, release and termination of the labor contract;

dispute resolutions; service period and limitation of competition; etc.


Injection Molding Workshop

Overtime

Day Shift 8:00——12:00 13:00——17:30 18:30——21:00

Night Shift 20:00——00:00 01:00——5:00 6:00——9:00

Normal working hours are five days a week, eight hours a day. According to the introduction from the

workshop leader, the factory implemented a system of working 24 hours of overtime each week over six

days: Monday to Thursday there are three hours of overtime per day, Friday there is two hours of

overtime, and Saturday there is 10 hours of overtime. Every day in the morning the workshop leader

calculates how many people need to work overtime and for how long. Then, the workers fill out an

overtime sign-up sheet to schedule their overtime (which is three hours by default). If a worker is not

willing to work overtime, or does not want to work so much overtime, they need to tell the group leader


149

and then fill out the sign-up sheet accordingly. The sign-up sheet for overtime on Saturday is usually

signed on Thursday or Friday. At this factory, Sundays are rest days. Some workers have work on Sunday

and rest on Saturday. Some night-shift workers choose to get to work an hour early at 7:00 PM so that

they can get off work at 8:00 AM and go to sleep a bit earlier. This extra hour of work counts towards

overtime pay.

For the day shift, if workers do not wish to work overtime, they finish at 17:00. If workers decide to work

overtime, then the half hour between 17:00 – 17:30 would be calculated as overtime. Workers work

overtime by default.

Work schedule for each departments

The investigator was in the injection molding workshop and did not come across a production quota.

There are two ways to clock in and out of work: a paper card or a fingerprint card. During the

investigation period, the fingerprint machine was being adjusted and had not yet been officially put into

use. Therefore, using the paper card to clock in and out was still the norm. If a worker forgets to clock in

or does it incorrectly, they need to fill out an application. This form says: “Dear Leader, due to

_______(reason), I forgot to clock in/out (or clocked in/out incorrectly). Please allow me to sign my card.

I hope to get your approval.” The worker must bring this form to the workshop office for the supervisor to

sign and the office clerk will then revise the form. There are no meetings before or after work. The

investigator did not encounter any meetings at all.

May to September is the peak season, with 64 hours of work per week and 24 hours of overtime; the rest

is off-peak season and the number of overtime hours is reduced by one-third.


150


Workers working in the factory

Wages:

The factory hands out last month’s wage slips on the 28th of every month. Wages are remitted to

workers’ Bank of China accounts. Regular workers’ monthly wages are around 3,500 RMB (504.44USD)

after deductions and includes the base wage of 1,800 RMB (259.43USD), overtime pay, night-shift

subsidies (18 RMB per day) (2.59 USD), and a “perfect attendance” bonus of 30 RMB (4.32 USD).

Overtime wages is usually 15.5 RMB (2.23 USD) per hour. Overtime on Saturdays pays 20.7 RMB (2.98

USD) per hour, and overtime on official holidays pays 31 RMB (4.47 USD) per hour. There are no

subsidies for working night shifts on Saturdays.

After the probationary period for regular workers ends and they pass an evaluation, they become a multi-

skilled worker with a base-wage of 1,914 RMB (275.86 USD). Overtime is then increased to 16.5 RMB

(2.38 USD) an hour. Overtime on Saturdays pays 22 RMB (3.17 USD) an hour and overtime on official

holidays is 33 RMB an hour. Multi-skilled workers have a monthly salary of about 3,800 RMB (547.68

USD).

Deductions: Dormitory fees are 30 RMB (4.32 USD) per month. Workers pay 257.56 RMB (37.12 USD)

for their social insurance. Workers have approximately 300 RMB (43.24 USD) deducted every month.


151

Method of calculation for working hours and wages

Worker’s paystub


152

Worker’s paystub

Leave Policy:

The factory has its regulations regarding sick leave, maternity leave, marital leave, and bereavement leave

publicly posted.

Regulations on applying for leaves


153

Holidays:

The factory posted a notice informing workers they have paid leave. Workers who have worked for a year

receive a 5-day annual leave and 10 days for those who have worked for 10 years.

Sick leave: Workers who are applying for sick leave must provide a medical certificate from grade A

hospitals in Dongguan (Ex: Shilong Hospital) and bring a sick leave request form to the human resources

office to apply.

Marital leave: 3 days. Applicant must bring supporting documents to apply for leave at the HR office.

Maternity leave: 178 days. Workers who need to apply for leave for lactation period, must make a request

from the HR office.

Paternity leave: 15 days. A birth certificate issued by the hospital is required and the applicant must bring

supporting documents to apply for leave at the HR office.

Bereavement leave: 3 days. (Only applies to immediate family members, must provide certificate issued

by local village committees or the police department.)

All workers are entitled to enjoy paid leave. Workers must apply to work on legal holidays with signed

approval from company leaders. Workers who worked on legal holidays without obtaining approval will

receive a warning letter or be dismissed from work.

Personal leave: Those who do not have personal leave approved will lose 100% of their wages on the day

and lose their attendance reward for the month. Personal leave must be applied beforehand or workers

must be able to provide sufficient evidence afterwards and fill out a leave request form. Those who failed

to comply will be considered as skipping work. Those who applied for personal leave for more than 30

days (including working days and non-working days) will have to go through a temporary resignation

procedure or apply for resignation and return all borrowed items.

Sick leave: Workers who meet all the requirements can receive 80% of their wages on the day they took

leave. Workers who fail to provide a valid medical certificate will not receive any wages for their leave.

Workers have legal holidays off. They have 3 days off for National Day and a day off on Mid-Autumn

Festival.


154

Notice on legal holidays for National Day and Mid-Autumn Festival Social Insurance:

The factory purchases social insurance for workers. Social insurance includes old age 377.78 RMB (54.45

USD), medical 61.66 RMB (8.89 USD), unemployment 14.43 RMB (2.08 USD), work injury 26.15RMB

(3.77 USD) and maternity 20.34RMB (2.93 USD), a total of 500.46 RMB (72.13 USD). Workers pay

257.56 RMB (37.12 USD).

Paid annual leave is enforced, and the basic salary of a multi-functional worker is 88 RMB (12.68 USD)

per day during the annual leave.


The factory has no recreational facilities.

Section 5: Dining and Accommodation Conditions

Dining Conditions

This factory provides room and board. The cafeteria is divided into two: One cafeteria for the regular

workers and one cafeteria for the office workers. The cafeteria for the office workers is only open to

higher level management staff. Regular workers can only go to their cafeteria to eat. At the workers’

cafeteria, breakfast is 2 RMB (0.29 USD) and includes noodles, fried noodles, and porridge. Lunch and

dinner are both 6 RMB (0.86 USD). Lunch and dinner include two meat dishes and one vegetable dish.

The quality of the food is satisfactory. The workers generally use cash to purchase food at the cafeteria.

The factory does not provide meal subsidies. On Sundays and public holidays the cafeteria is closed.

Most factory workers do not eat in the cafeteria, but rather choose to go home to eat or eat at the fast food

place outside the south gate.


155

Factory meals

Workers eating in the factory cafeteria


156

Poster about factory cafeteria

Accommodation Conditions

The workers’ dormitory is behind the cafeteria. The area of each room is 15m2. There are four bunk beds

with iron frames. There are also two electric fans, two fluorescent lights, and four rusty cabinets. On the

balcony of the dormitory there is a sink and clothesline. The washroom is also the place to

shower. Electricity usage in the dormitory is limited. Outlets can only be used to charge cell phones and

cannot be used for high-power devices such as blow dryers. The dormitory fee is 30 RMB (4.32 USD) per

person per month. Workers do not need to pay water or electricity fees. In general, dormitory rooms have

two people (three at most). The number of workers living at the dormitory is very low because the

overwhelming majority of workers rent a house in Shipai town. In Shipai, a 1 bedroom-1 living room

apartment has a monthly rent of around 200 RMB (28.83 USD).

Workers who do not eat at the cafeteria and do not live in the dormitory do not receive any subsidies.


157

Interior of the dorm room, only two fans were installed in the room


158

Dormitory bathroom


159

Notice saying smoking is prohibited in the dorm, those who violated will receive a warning letter. The

notice below reads electricity usage is limited and can only be used to charge cell phones.


Safety Equipment

Workers working in the workshop


160

During the investigation period, the temperature inside injection molding workshop of building A was

approximately 30℃ and would increase to 32℃ in the afternoon. The temperature in the injection

molding workshop of building B was slightly lower than building A at approximately 28℃. All the

workshops have air conditioners installed. Electric fans were installed right above the work positions and

ventilation fans were installed above the windows. The workshops are hygienic, and there are no

obstructions in the hallways. First aid kits for the workshops and dorm are located inside the office.

Personal Protective Equipment:

On the walls of the injection molding workshop, there is CC. This notice introduces the dangers of noise

and dust and discusses ways to protect oneself from these dangers. For example, workers can wear

protective earplugs, a protective mask, and protective glasses. However, the workshop does not provide

the injection molding workers with the protective equipment listed above. In the scraps workshop and

mixing workshop, dust fills the air and there is a lot of noise. The notice regarding occupational diseases

and danger points out that workers have a responsibility to wear a mask, gloves, earmuffs, and protective

glasses. However there are also workers who do not wear protective gear while working (the video shows

that there is a worker adding materials into the machine without wearing any protective equipment).

At the injection molding workshop where the investigation was conducted, workers were not exposed to

chemicals.


161

Notice posted regarding occupational diseases and danger


The factory has a safety committee but no environment and health committees.

Work injuries

There were no incidences of workplace injury at the factory.


The emergency exits of the workshops and dorm are clearly labelled. The hallways of the workshops and

dorm are kept clear of any obstructions. The emergency exits are not locked. No flammable objects are

stored in the factory and dorm areas.

The fire extinguishers in the dorm and workshop had an inspection log indicating it was checked on a

monthly basis. The value displayed on the pressure gauge indicates normal pressure.


162

Fire extinguisher and fire hydrant

Every year, the factory holds two fire drills, they take place in both the production areas and dormitory

areas. Fire drills took place on September 27th and 28th. Fire safety officers were checking the fire

hydrants and fire extinguishers in the workshop at 11:40 AM. At 11:45 AM, the fire alarm went off,

workshop staff and management personnel left their work positions to gather at the gathering spot. After

listening to an employee read the “Provisions on the Administration of Fire Safety”, they returned to their

work positions which marked the end of the fire drill. The drill lasted for less than 10 minutes. When the

fire drill took place, the machines in the workshop continued to operate and workers were still working as

they were not invited to participate in the fire drill.


163

Unobstructed hallway

A fire safety officer inspecting the fire hydrant


164


No public rewards or penalties notices were seen.

The factory ‘s “factory area public safety regulations” and “dormitory regulations” documents consist of

two types of penalties: warning and dismissal. The two documents total 7 pages and more than 100

sections.

There are seven types of rewards. Some of the examples of ways to receive a reward include: those who

report theft, vandalism or a violation of laws, those who contribute to an increased production quota, etc.

For the workers, only the 30 RMB (4.32 USD) full-attendance reward is likely to be obtained.

Section regarding rewards

Some of the penalties that will result in receiving a warning include: no smoking in the production area,

no photography allowed in the workshop without permission, no food allowed in the workshop and etc.

Some of the penalties that will result in dismissal include: bringing or hiding flammable objects, drugs,

weapons, knives and other contraband, stealing company property which includes but is not limited to

finished products, half-finished products, stationery, documents, equipment, materials, waste products or

anything that belongs to the company, stealing property from another person and etc.


165

Sections regarding penalty


Labor Union

The members of the labor union and the workers’ representative are posted in every workshop. Each

department’s representative is also the department’s manager. They completely represent the interests of

the factory’s management.


166

Name list of the current members in the labor union

Complaint Procedure

The hotline number for the factory is 18033339700 and the ICTI care hotline number is 4001583580.

During the investigation period, all interviewed workers said they had never used the hotline. There is

also a suggestion box available in the factory. A notice with the complaint hotline number is posted next

to the suggestion box. Workers can also file a complaint via text message, however, the investigator is

unsure whether management responds to the text messages.


167

A poster regarding the ICTI CARE Foundation

Suggestion box


168

Section 10: Other


There were no audits or official visitors during the investigation.

Worker Satisfaction

Workers are generally not satisfied with their wages. They think the wages at this factory are too low.

Working at this factory work for 64 hours per week during months where there are no night shifts, and the

average salary is around 3,500 RMB (504.44 USD). During a month where there are night shifts, the

average monthly salary is around 3,800 RMB (547.68 USD). Workers hope that their wages will be

increased to more than 4,000 RMB (576.50 USD). This factory has 24 hours of fixed overtime per week.

Many workers think overtime is too long and tiring so they pick 1 day a week to not work overtime.

Workers in the injection molding workshop are mostly female (mostly migrants from Hunan, Sichuan,

Guangxi, and Guangdong). There are some male workers. Most female workers are already married with

children and rent a home in Shipai town. The children go to school in Shipai and the husbands also work

at a factory in the neighborhood. There are a good number of couples where both the husband and wife

have both worked at Herald factory for many years. The female factory workers say that the wages are

paid according to an hourly rate and not according to piece-rate. Even if there are many urgent orders

placed, there is still one day of rest each weekend. Working hours are fixed, stable, and there is not so

much pressure. Therefore, even though the salary is not so high, they are willing to accept it. In the

salaried-class family financial structure, the main source of income is from the man (housing deposit,

renovations, buying a car). The income from the woman is mostly used for daily expenditures (rent, water

and electricity bill, living expenses, costs associated with children’s education). Therefore, the pressure

for female workers to make money isn’t so intense. Many female workers buy social insurance. They

hope that after retiring they can guarantee themselves a basic standard of living.

The investigator discovered that some workers took the initiative to work for five consecutive night shifts

in order to earn more money. There were also workers who would go to other factories after work to do

several hours of temporary work.

Investigator Journal

I woke up at around 7:30 AM in the morning, had breakfast, finished washing up, and took three minutes

to walk to the injection molding workshop. After punching in, I waited for the team leader to arrange

work. At around 8:10 AM, the group leader came over and asked me to go to the No.13 machine, the

largest one in workshop B of the injection molding department. In one cycle of building and closing the

mold, ten finished parts were injected into the box below the machine. The machine was semi-automatic.

Every time I opened the mold, I needed to manually open the door of the injection molding machine, take

out the adhesive nozzle, throw it into the nozzle box, and close the door of the injection molding machine.

In about ten minutes, the box below the machine would be half full. At this time, I needed to bend over to

pull out the box, then lift the box and pour the plastic parts inside the box on the big table.

Some of these plastic parts have burrs or there is something protruding on the nozzle and you’ll need to

use your hands to scrape away these protruding bits and burrs. Occasionally, due to the high temperature

of injection molding, some edges of the plastic pieces will burn and turn black. If this happens, you need

to use your hands to scrape away the black part. For the non-burnt plastic pieces, you don’t really need to

do anything to them. Then, you take all the plastic pieces, and neatly place them into paper or plastic


169

boxes, from left to right. Because workers need to work quickly to produce many plastic pieces, and often

use their hands, each machine will have at least two people working on it. One person operates the

machine, while another person packages the boxes. At the same time, both people need to use their hands

to scrape the burrs, nozzles, and burned parts. However, doing this means the workers cannot keep up

with the production speed of the machine. Therefore, a worker often needs to take the box with the plastic

parts and stack the box on a pallet away from the work area, and workers will then classify the parts,

arrange them and package them into boxes later. Working on the machine, workers have to bend over to

pull out the box pretty frequently with no seats available. Under these circumstances, they usually have an

aching back and stream with sweat after working for one or two hours. Even during the one minute

interval between the closing of the first mold and the building of the next mold, workers need to scrape

the nozzle and sort the products with no time to take a rest. If they want to leave the post to go to the

bathroom during work, they have to find a person, usually a maintenance technician, to take over for a

while.

Workers working

Lunch time started after 12:00 PM. Since the injection molding machine cannot stop once it starts, the

team leader would arrange people in advance to take over. This is called “machine take-over”in the

factory. Workers who take over usually arrived at their work position five minutes in advance and are

informed about the precautions on how to sort and pack. After the handover, I washed my hands and

punched out for lunch.

Lunch time was about an hour and most workers returned to their rental house to cook for themselves.

People like me who just arrived and lived in the dormitory would have lunch in the cafeteria. Meals at the

cafeteria were 6 RMB (0.86 USD) and had two meat dishes and a vegetable dish of satisfactory quality

and quantity. However, some workers who worked in the factory for over ten years had never eaten in the

cafeteria because they thought the amount of vegetables and meat was too little. Some workers would eat

at the fast food restaurant outside the south gate of Herald factory which costs 7 RMB (1.01 USD) a meal,

and had more meat compared to the meal at the cafeteria. After finishing my lunch, I would go back to the

dormitory and sleep for half an hour. Some workers go on the internet or sleep in the rest area outside the

cafeteria after lunch. Those who went back to their rental house find it hard to squeeze in some time to

take a nap because it took time to go back and forth and also cook.


170

Factory meals

Fast food restaurant outside the south gate of Herald Factory

When the alarm clock rang, I got up and went back to the workshop, punched in, and started to work.

Workers who took over our machines went back to their original station, usually to pick up the nozzles in

the rest area, or to classify some small plastic parts. In the afternoon, work was from 1:00 PM to 5:30 PM,

half an hour more than in the morning. Since these sets of molds were large and complicated, there are, at

times, some malfunctions that need to be repaired. If it was a small glitch, the technicians only take a

short amount of time to repair the injection molding machine; therefore, in the meantime, workers could

arrange the plastic products which had piled up. If the malfunction was more complicated, it would take

several hours to disassemble the mold and transport it to the mold shop for repair. At the same time, the

team leader would arrange us to process the piled up plastic parts and then transfer us to other machines

or rest areas to process the semi-finished products, or to sort or pack. When the mold was being repaired,

we could take a short breather, move around, and sort products at the rest area with seats provided. Since

the rest area at the corner of the workshop was far away from the injection molding machines with

slightly less noise, I got the opportunity to chat with the surrounding workers. One female worker said


171

that she originally worked in the packaging workshop, assembling a pile of toy parts, putting in the

instructions, and packaging the boxes. Although the assembly line did not require standing, the hand

movements needed to be fast enough to keep up with the pace. If you slowed down a bit, there would be a

lot of semi-finished products piled up on the assembly line. She was annoyed and stressed about the

process, so she resigned and went to the injection molding workshop with her husband.

Usually one hour is enough time to fix the mold and install it back in the injection molding machine.

After the technician makes some adjustments for the mold to function normally again, the group leader

will call us to return and continue working. In the afternoon, there are usually some workers who doze off

while working. Some workers bring their own essential balm or pain relieving ointment. When they feel

sleepy, they just rub some on their temples to get rid of that sleepy feeling.

Workers waiting in line to clock in/out

At 5:30 PM, it was time to eat dinner. After the workers who take-over the machines arrived, I went to

eat. Usually, the cafeteria starts serving food at 5:00 PM and sometimes there is no food left when we

arrive at the cafeteria for our meal at 5:30 PM. When this happens, we go outside the factory to a fast-

food restaurant to eat. In the afternoon, the time allocated for eating is also an hour. After eating, usually

we go on the internet in the rest area outside the cafeteria while we wait for the next work shift to begin.

We return to the workshop at 6:30 PM. It takes more than half an hour to turn on the machines. Then, the

night-shift workers come and begin to work. Originally, the night-shift began at 8:00 PM and ended at

9:00 AM. However, because the time lag made night-shift workers exhausted and sleepy, workers are

asked to finish their shift earlier. So now, night-shift workers begin their shift at 7:00 PM and end their

shift at 8:00 AM. After the night-shift workers come, the group leader will usually arrange for us to go to

the rest area and trim the nozzles, or classify the small plastic parts. At this time there is an opportunity to

chat with other workers. One worker, after working for one day, ached from his arms to his back. This

was because opening and closing the injection molding machine door requires a lot of force. In a day, he

has to open and close this door hundreds of times. There are also workers who have to stand on their feet

for the whole day, causing their legs and feet to be very sore. These people can only sit when they work

overtime in the rest area. Some workers call this rest area “heaven” because there are places to sit, you


172

don’t sweat profusely there, and you can even chitchat. In the rest area, there is no need to keep up with

the pace of the machines. It’s more comfortable and less tiring. After working overtime until 9:00 PM,

you can clock out. At this time, it is already dark outside, and there are also not a lot of people on the

streets. When return to the dorms, we wait in line to take a shower, then do laundry, brush our teeth, and

before you know it, it’s already 10:00 PM and we need to go to sleep.


173

Information Disclosure Request

China Labor Watch submitted an information disclosure request to relevant local government

departments. The organization requested the government to disclose each factory’s social insurance

contribution for workers, whether the government had conducted a work safety check, if the factory had

applied to implement a comprehensive working hour system, and the percentage of dispatch workers. According to the response from the Heyuan City Human Resources and Social Security Bureau regarding

the Wah Tung Toy factory, the company does not use dispatch workers. The labor security supervision

agencies also do not have any administrative punishment record for the factory’s violation of relevant

social insurance provisions. Since 2016, the company has not submitted an application to the Yuancheng

District Human Resources and Social Security Administration for the implementation of an irregular

working system and a comprehensive working hour system. Therefore, no relevant approval decision has

been made. The Yuancheng District Social Security Management Bureau indicated that through the social

insurance system inquiry, the details of the social insurance payments of Wah Tung in the year of 2016

and 2017 can be obtained. However, only the total number of insured people and the total number of

contributions per month can be inquired. There is no specific list of insured people. CLW received no

response from the State Administration of Work Safety regarding work safety checks conducted at the

factory. The Dongguan Administration of Work Safety provided a response regarding the Lovable Toy Factory

and Herald Metal and Plastic Works Factory. The response mentioned that to process the application,

proof of a connection to the applicant’s production, lifestyle, scientific research and other special needs

must be provided within 15 working days to explain the reason for the application. The response from the

Dongguan Human Resources Bureau mentions that no information regarding dispatch workers was found

in inspections carried out between 2015 and 2017. Additionally, the department has no information

regarding the percentage of dispatch workers at Lovable and Herald between 2015 and 2017. According

to the Dongguan Social Insurance Bureau, Lovable and Herald do not have any records showing they

have been punished for violating the social insurance law. No response was provided regarding the

comprehensive working hour system and social security.

The Dongguan City Human Resources Bureau provided a response regarding the Lovable Toy Factory

and Herald Metal and Plastic Works Factory. From 2016 to 2018, no relevant approval decision has been

made by the Dongguan City Human Resources Bureau with regard to the implementation of an irregular

working system and a comprehensive working hour system of the Lovable Toy Factory. During the same

period, the Dongguan City Human Resources Bureau approved the implementation of a comprehensive

working hour system at Herald Metal and Plastic Works Factory four times.

No response was received from the local government regarding the Jetta factory.


174

Factory Working Conditions Comparison Charts

China Labor Watch conducted investigations into Jetta (Guangzhou) Industries Co., Ltd in 2015. The

chart below compares working conditions between 2015 and 2018.

Jetta (Guangzhou) Industries Co., Ltd. 2015 vs 2018 Working Conditions Comparison Chart

2015 2018

General

Recruitment

Hiring discrimination based on gender.

Jetta turned away some male workers

during the hiring process.

During the investigation period, the

factory was recruiting many long-term

workers who are over the age of 23.

Student Workers No mention of it in the report During the investigation period, the

factory had a lot of summer workers -

the majority of whom are high school

graduates, some of whom are college

students. The summer workers leave

mid to late August.

Physical

Examination

Workers must pay for mandatory pre-

job physical exams themselves

Doctors that came to the factory will

check off some physical exam items as

complete without actually performing

the corresponding tests.

Except for painters (one of whom died

in 2014), no workers receive on-the-job

physical exams or pre-resignation

physical exams.

Workers must pay 35 RMB for the

physical examination.

Workers must have a physical exam.

The physical exam is mostly a blood

test and a chest X-ray.

Workers pay 35 RMB (5.03 USD) for

the exam and cannot get the results of

the exam.

Training and

Orientation

Pre-job safety training only lasts for an

hour or so, far short of the legal

minimum of 24 hours.

Workers are not paid for the day of

training and hiring procedures.

There is a pre-job training that is about

2 hours and is paid.

Probation No mention of it in the report New workers have a probationary

period of two months.

Resignation Resignation dates are usually delayed

by management. When the investigator

tried to resign, and the supervisor asked

During the probationary period,

workers must give three days notice

before resigning. During the contractual

period, workers must give one month


175

her to wait until they found another

worker to replace her.

Workers must “apply” and receive

“approval” for their resignation.

notice before resigning. Worker who

want to resign must get a resignation

letter from the group leader. After

filling out the resignation date, a

superior will sign confirming that they

can resign.

Labor Contract The labor contract was a short-term

contract with duration of five and a half

months.

Workers must fill out an “overtime

application” during hiring procedures.

The labor contract was a short-term

contract lasting 2.5 years

Working Hours Normal working hours are only 7.25

hours per day, which is a method meant

to reduce weekend overtime pay by

shifting some regularly paid overtime

hours onto the weekend.

Although the working time can be

adjusted, it is normally Monday to

Saturday (on Saturday there is a half-

shift).

According to the schedule, there should

be a one-hour midday break for lunch

and a rest. But in reality, many workers

would have to return to the workshop

to begin work before the lunch break is

over and work done during this time is

unpaid.

During peak season, normal working

hours are 8 to 10.5 hours per day.

Off season, normal working hours are 8

hours per day.

Overtime Giving or taking away overtime work is

used by management as a tool of

control to encourage faster production.

During off season, workers

occasionally work overtime. If they do

work overtime, it doesn’t surpass two

hours of overtime.

During peak season, workers work 1.5

to 2.5 hours of overtime per day. This

equals 17.25 to 19.75 hours of overtime

per week and 66.5 to 78.25 hours of

overtime per month.

Overtime hours are the longest during

June, July, August, and September, and

is around 80 hours. If a worker is

pregnant, the factory can arrange for

her not to work overtime. Workers can

choose not to work overtime; they just


176

need to inform the production manager.

If workers do not work overtime, then

they may have their overtime hours

cancelled on workdays and Saturdays,

or be asked to resign.

Labor

Remuneration

The base wage is the local minimum

wage.

Every day, workers are required to

work before the shift begins, for which

they are unpaid.

On average, workers earn

approximately 2,000 RMB a month

($290/month). During low seasons,

without much or any overtime, a Jetta

worker only earns a base wage of 1,895

RMB ($304)/month. It is very rare for a

worker’s wage to exceed 3,000 RMB

($481)/month, even during high

seasons with lots of overtime.

During peak season, workers average

monthly wages are 2,900 to 3,500

RMB (416.93-503.19 USD) (after

deducting social insurance fees).

During off season, workers average

monthly wages (after taking out social

insurance fees) is not more than 2,000

RMB (287.54 USD).

Workers monthly wages are generally

2,100 RMB (301.91 USD), usually

around 12 RMB (1.73 USD) an hour.

Overtime hourly wages are calculated

by 12.07 RMB (1.74 USD) × 1.5.

Hourly overtime wages earned on off

days are calculated by 12.07 RMB

(1.74 USD) × 2. Hourly overtime

wages earned on official holidays are

calculated by 12.07 RMB (1.74 USD) ×

3.

Leave Policy No mention of it in the report There is paid sick leave. If you want to

take a sick day, you need to get a

absentee form from the production

manager and provide a doctor’s note.

The factory has paid annual leave,

maternity leave, marriage leave and

funeral leave. Workers must provide

advanced notice to product

management staff prior to taking leave,

and also ask for a leave request form.

Maternity leave is paid according to

related labor laws. A female worker

from the electronics workshop

mentioned that the assembly line she

works on, allows workers to submit a

leave request form after they take

annual leave.

Vacation No mention of it in the report The factory has paid leave. Statutory

holidays are unpaid.


177

Social Insurance Jetta does not purchase most legally

mandated insurance and benefits for

workers.

Only workers hired before 2008 are

provided with retirement and

unemployment insurance.

The factory buys social insurance for

the workers. The amount deducted for

social insurance from each worker is

different depending on which

department they work in.

Recreational

Facilities

There are indoor and outdoor athletic

facilities. Inside there are ping-pong

tables and badminton courts, but no

ping pong balls or rackets are provided.

When the investigator made inquiries

about where she can rent a ball or a

racket, she was told there was no

renting service anymore because there

were too many people trying to rent. So

whoever wants to play has to buy their

own equipment. The investigator

noticed that very few people were

actually using the facilities.

The factory has a library, TV room,

Karaoke room, soccer field, tennis

court, dancing studio, indoor

gymnasium, ping pong tables and a

bulletin board.

Dining

Conditions

Meals are not free at the factory.

Money is added to workers’ work IDs

in order to pay for food at the cafeteria.

The worker cafeteria in Jetta provides

breakfast, lunch, dinner, as well as a

midnight meal (for night shift workers).

There are many food choices in the

cafeteria as the food service is

contracted out to a catering company.

The cheapest meal costs less than three

RMB ($0.48). A better meal with two

dishes costs about seven RMB ($1.12).

While the staff cafeteria is very close to

the worker cafeteria, the former is

much nicer and is furnished with fancy

decorations. The investigator once went

to the staff cafeteria for breakfast. She

found the food there to be much better.

The factory provides room and board,

breakfast (3 RMB/0.43 USD), lunch

and dinner (5-7 RMB/0.72 USD-1.01

USD). Workers think the food in the

factory is cheaper than outside food.

The cafeteria in the factory is relatively

big and clean. To buy food, workers

put money on their factory card and

then can swipe the card to make a

purchase. The cafeteria only provides a

bowl. Workers have to bring their own

soup spoon. After eating, workers put

their bowl in the utensils bucket. Some

workers choose to bring their own food

to eat in the cafeteria.

Accommodation

Conditions

Dorms house eight people per room.

Bathrooms are public and showers lack

hot water. There are no outlets in

rooms; workers can only charge

electric devices in a single room in the

dorm building

The monthly cost for a worker to live in

the dorm is 40 RMB ($6.42), utilities

The dormitory is four people to a room.

The rooms have an electric fan and

lockers. The water and electricity fee is

around 40 RMB (5.75 USD) per month.

There are no individual bathrooms or

showers per room. The shower building

has about 10 shower-heads, but does

not provide hot water. The water is


178

included. If a worker does not stay for a

full month, she has to pay for 1.3 RMB

($0.21) for each day. It is a worker’s

own choice whether to live in the dorm,

and workers who do not live in the

dorm are not required to pay the

monthly fee of 40 RMB ($6.42).

However, they will also not receive a

subsidy for their living expenses.

dirty. Workers need to use a bucket to

get hot water to shower.

Occupational

Safety and Labor

Protection

There is no occupational health and

safety committee. Workers are given

practically no training on specific

health risks in their working

environment and how to protect

themselves.

Very few workers are supplied with

protective equipment, which has led to

a number of health risks and injuries.

Workers are sometimes made to wear

protective gear when an inspection

occurs.

Some production machines are not

regularly inspected or maintained.

The factory does not have an

environment, health and safety

committee. During the pre-job safety

training, the instructor distributes a

copy of the job safety manual and an

ISO14001 environmental management

system training manual. New workers

also took a factory-level training exam,

which lasted for around 20 minutes.

Work Injury A worker from painting workshop died

in 2014 (the details of which are

unclear)

The investigator observed that the

hands of one female packaging worker

were covered with scars, cuts of

varying severity, and a lot of peeling

skin. She said that the company did not

provide her with gloves.

The factory has had incidencies of

workplace injury but not many. Each

year it happens once or twice.

Fire Safety There were no inspection records found

for the firefighting equipment on the

second and third floor of the dorm

building in which the investigator

stayed.

Some fire prevention equipment is not

regularly inspected.

The workshop and dormitory hallways

and exits are clearly marked. Lighting

is sufficient and there are no obstacles

impeding a safe exit. Workshops and

the dormitory have fire extinguishers.

Rewards and

Penalties

Fines on workers rarely occurred at

Jetta. The investigator never observed

any notice for fines on workers. At the

“Rewards and punishments” are clearly

set out in Chapter 13 of Jetta

(Guangzhou) Industries Co. Ltd. rules


179

same time, there are also no rewards

available to the workers.

and regulations. The rewards are a

commendation, recording a merit,

salary increase and promotion. The

punishments include a written warning,

demerit points, and termination of the

labor contract.

Labor Union Jetta has no union to speak of and lacks

independent or effective grievance

channels.

The factory has a union and worker

representatives. Workers say that the

worker representatives are

recommended by the workshop

manager or personnel. The factory

union holds a meeting once every two

months, and each meeting lasts for one

hour. The most recent meeting was

held at the end of July.

Grievance

Procedure

There is a “hotline” event for the face-

to-face communication between

workers and Jetta management.

There is a complaint box in the factory

area.

The factory has a grievance hotline

which is open every Thursday from

5:00 PM to 7:00 PM. However during

peak season, workers work overtime

until 6:45 PM or 7:15 PM.When they

get off work at this time, the hotline

workers also get off work.

Worker

Treatment

No mention of it in the report Regarding the factory’s management

system, workers think that some of the

management have bad characters.

There was a female worker who spoke

back to a production management

personnel, and was sent to the most

laborious work position. There was a

different female worker who was

working too slowly and was also sent

to the most tiring work position. There

was another female worker who applied

for leave because of a stomach ache

and was asked to resign.

Client Visits and

Audit

No mention of it in the report No mention of it in the report


180

In 2017, China Labor Watch conducted investigations into the Dongguan Qualidux, Chang’An Mattel and

Wilson factories. This year, our investigators interviewed workers outside the three factories regarding

the current working conditions and the charts below compares the working conditions between 2017 and

2018.

Dongguan Qualidux Plastic Products Ltd. Co. 2017 vs 2018 Working Conditions Comparison Chart

2017 2018

General

Recruitment

Applicants must be at least 18 years of

age, possess a valid ID card and be

healthy. There are no restrictions on

gender. After hiring, workers are placed

into their department’s workshop based

on the factory’s production needs and

the worker must unconditionally accept

the placement.

There are approximately 300 workers

in the factory now. The factory

security says that the factory is no

longer recruiting workers (the factory’s

electronic billboard currently still

shows that the factory is recruiting but

in fact it is only used to keep the

current workers assured). According to

the workers, the factory will soon take

a long break. Many workers felt that

the factory will soon be shut down

because the employer did not want to

stay in business.

Physical

Examination

Workers do not undergo a physical

examination at the time of recruitment.

After workers are hired, the factory

schedules physical examinations.

Factory higher ups decide which

workers are to undergo a physical

examination and the workers go have

their physical when it is their turn. The

factory covers physical examination

fees. After their physical examination,

workers can pick up their results.

At this time, the factory stopped

recruiting.

Training and

Orientation

During orientation, workers first sign

the registration sheet and then fill out

two forms: the first is a new employee

(temporary worker) onboarding form,

the second is a new employee training

test (the trainer first tells them the

answers and then they fill out the test).

There is a simple explanation for how to

use a fire extinguisher and there is not

training related to occupational safety.

The orientation lasts for an hour.

Training time is not calculated in the

attendance card.

The factory is not recruiting.


181

Probation There is a two month probation period. There previously was a probationary

period of 3 months.

Working Hours The factory’s standard work hour

structure is 8 hours a day, 5 days a

week. On average there is 26 days of

work a month. Any work done outside

of these hours is calculated as overtime.

Generally, working hours are 8 hours

per day, with 2 hours of overtime at

night. Workers work 5 days a week

and clock in/out 6 times per day

without having to wait in line.

Overtime During off-peak season of the factory,

there is generally 2-3 hours of overtime

a day, and work is 6 days a week. On

weekends, there are 8 hours of overtime

a day. On average, there are 110 hours

of overtime a month.

During peak season of the factory, from

Monday to Friday there are 3 hours of

overtime. There are 6 to 7 days of work

a week. On weekends, there are 8 hours

of overtime a day. On average, there are

140 hours of overtime a month.

Workers are forced to work overtime.

There is aggressive labor intensity at

work. Workers are required to sit for a

very long time and to speed up their

production.

According to factory regulations, every

day a worker can only work 2 hours of

overtime. The factory generally does

not punish workers who do not work

overtime.

Labor

Remuneration

Long term workers’ wages: Base wages

are 1,510 RMB a month ($227.85

USD), regular wages are 8.68 RMB an

hour ($1.31 USD), wages for overtime

worked during regular hours are 1.5

times regular wages or 13.02 RMB an

hour ($1.96 USD); wages for overtime

worked during weekends are 3 times

regular wage or 26.04 RMB an hour

($3.93 USD).

Temporary workers’ wage: Workers

introduced by intermediaries earn 14

RMB an hour ($2.11 USD), while

workers recruited by the factory earn 12

RMB an hour ($1.81 USD). Overtime

wages follow the corresponding hourly

pay.

On average, workers earn 2,000

RMB/month ($287.54 USD/month).

There are no dispatch workers and

wages are paid according to the

number of hours worked. Normal

overtime fees are paid according to the

rates determined by law. The factory

does not work overtime on weekends

and workers get two days off per week.

Social Insurance The factory does not proactively pay

workers’ social insurance. Temporary

The factory purchases social insurance

for workers who completed the three-


182

workers choose not to buy insurance.

Long term workers who want to

purchase insurance must work at the

factory for a long time and then apply.

Insurance fees are 216.73 RMB a month

($32.71 USD). Insurance is primarily a

pension fund.

month probationary period. All

workers must purchase social

insurance. Both the factory and

workers purchase social insurance

according to the rates determined by

law.

Dining Conditions Food conditions are especially poor.

Workers express the cafeteria fees are

expensive. The factory does not provide

any sort of subsidy.

Workers can pick from a variety of

food choices and the food quality is

pretty good. However, workers are

unable to afford the food because their

wages are relatively low. Workers’

wages are deducted depending on how

much they eat.

Accommodation

Conditions

Dorm environments are sub-standard.

The hallway lighting is poor and

garbage can be seen everywhere and a

foul smell permeated the area.

There is a dormitory. The dormitory

costs 40 RMB (5.75 USD) per month

with water and electricity included.

Occupational

Safety and Labor

Protection


environment, health and safety

commission. There is no occupational

training or even work clothes. The noise

in the workshop is very loud and there

is a lot of dust. Except for a work hat,

workers are provided with no other

protective equipment.

Workers are exposed to chemicals, and

are thus provided with masks and

gloves.


183

Dongguan Chang’An Mattel Second Factory 2017 vs 2018 Working Conditions Comparison Chart

2017 2018

General

Recruitment

The factory does not hire minors or

individuals who are older than 45 years.

The investigator is uncertain if there are

underage student workers.

The factory requires workers to have

at least a middle school education but

did not specifically say what kind of

person they would not hire. The

investigator is uncertain whether or

not there are underage workers, but

workers said college students came

to work in the factory during summer

holiday.

Physical

Examination

Only employees in special positions need

to undergo a physical examination. Fees

are covered by the factory.

A pre-job physical examination is

required but there is no post-job

physical examination. Fees are

covered by the factory. The physical

examination covers a general check

up and takes place in Chang’an

Wusha Hospital.

Training and

Orientation

New workers are provided with training.

Training is four hours long and includes

information on occupational safety and

environmental monitoring. Training time is

included in wages.

New workers are provided with

training. Training is approximately

30 to 60 minutes long and includes

information on occupational safety.

Training time is included in wages.

Probation The probation period is seven days. The probation period is seven days.

Working Hours The normal working hours are 8 hours a

day, 5 days a week, and an average of

21.75 days per month.

The normal working hours are 8

hours a day, 6 days a week and an

average of 21.75 days per month.

Workers clock in/out 6 times per day

without having to wait in line.

Overtime On average, there are 3 hours of overtime a

day and a full day of overtime on

Saturdays. There is around 110 hours of

overtime per month.

According to factory regulations,

working overtime is voluntary. The

factory generally does not punish

workers who don’t work overtime.

There are 2 hours of overtime per

day during off season and 3 hours of

overtime per day during peak season.

Workers get a day off every week.

Labor

Remuneration

The base wage is 1,507 RMB a month

($227.37 USD), 8.97 RMB an hour ($1.35

USD). The previous month’s wages are

given out the 15th to 17th of each month.

On average, workers earn 4,000

RMB/month (575.08 USD). There is

no difference between dispatch

workers and regular workers. Their


184

wages are paid according to their

hours worked.

Food Condition Workers may choose which meal plan they

wish to purchase.

The factory provides a meal subsidy of 4

RMB/day ($0.60 USD/day). During peak

season, new workers can receive free meals

during their first month.

There is a rich variety of food

choices but the price is relatively

expensive. The factory provides a

meal subsidy of 260 RMB/month

(37.37 USD/month), which does not

cover all of their meal expenses, so

workers have to use some of their

own money to eat.

Accomodation

Conditions

The factory provides accommodation for

workers, and workers may choose whether

they wish to live on-sit. Factory housing

cost 1.73 RMB/day ($0.25 USD/day).

Eight people share one room with bunk

beds, closets, an electric fan, stools, a shoe

rack, a balcony and mirrors. Each closet

has a USB socket in it to charge cell

phones. The dorm rooms are not locked,

and thus there is no guarantee that workers’

personal items will be safe.

For dorms with an air conditioner

installed, the fee is 104 RMB/month

($14.95 USD/month) and each room

fits 6 workers.

For normal dorms, the fee is 52

RMB/month ($14.37 USD/month)

and each room fits 6 workers.

Social Insurance After the probationary period is over, the

factory purchases five categories of social

insurance for the worker and contributes to

the housing provident fund.

The factory purchases social

insurance for workers who have

perfect attendance for the month. All

workers must purchase social

insurance. Both the factory and

workers purchase social insurance

according to the rates determined by

law.

Occupational

Safety and

Labor

Protection

There is an environmental monitoring and

safety commission. Before assuming the

job position, workers have a training

relating to occupational safety. Workers in

special positions are provided safety

equipment and have to undergo a physical

examination mid-employment as well as

pre-employment. Production equipment

and machinery are regularly inspected.

Workers are exposed to chemicals,

and are thus provided with gloves.


185

Winson Precision 2017 vs 2018 Working Conditions Comparison Chart

2017 2018

General

Recruitment

Job applicants must be over 18 years old.

During peak seasons, Winson recruits a

large number of workers. Workers are

directly recruited by the factory. There is

no application fee or deposit required,

and documents are returned in a timely

manner. After completing a basic

interview, everyone is taken to the

employee lounge and asked to complete

a personnel file as well as submit the

photocopy of their ID along with their

photos.

The factory recruits Chinese citizens

who are 18 to 45-years old and who

possess an ID card.

Student Workers Job applicants must be over 18 years old. Still unknown.

Physical

Examination

Except for some unique positions, most

workers do not need to undergo a

physical examination. The cost of

physical examinations is covered by the

company, with physical examinations

occurring before, during and after

employment.

There is no requirement for a physical

examination.

Training and

Orientation

In the morning, there is a four hour

factory-level training session covering

many topics. The health and safety

training is very general and does not

cover specific positions in the

workshops. In the afternoon, there is an

hour-long training in the workshops,

covering topics of safety, discipline,

request for leave, and time cards etc.

One day before entering the factory,

there is a safety training and a factory

culture training. The goal of training

is to ensure safe production of goods.

Wages paid for the training are in

accordance with Shenzhen’s

minimum wage standard.

Probation The contract stipulates a 6 month

probationary period.

There is a 1 month probationary

period.

Working Hours The factory runs on a schedule of 8

hours per day, 5 days per week.

The factory runs on a schedule of 8

hours per day, 5 days per week. You

need to line up to clock in and out of

work each day. Clocking in does not

take more than 5 minutes.

Overtime During off seasons, normally no

overtime is required. During peak

seasons, employees are required to work

Overtime is voluntary. There is no

punishment for not working overtime.

During off season, overtime is 2.5


186

3 hours of overtime each day and work 6

days a week. On Saturdays, employees

work 8 or 11 hours of overtime, with a

monthly average of 85 hours of

overtime.

The most overtime occurs in the month

of July, with the amount of overtime

worked depending on the number of

orders the factory receives. If a worker

decides not to work overtime, he or she

needs to verbally notify the production

line leader ahead of time, and there is no

punishment for not working overtime.

hours per day, but occasionally no

overtime is required. During peak

season, overtime is 2.5 to 4 hours per

day. Other than those in the double-

shift system, every week has 1 rest

day.

Labor

Remuneration

During off seasons, average wages are

2,200-3,000 RMB ($330 - $450 USD),

and during peak seasons it is 3,500-

4,400 RMB ($530 - $660 USD). Wages

include a base wage, overtime pay, and

compensation. Additionally, individual

income tax, social insurance,

accommodation fee, water and electricity

fees are deducted from wages.

Standard pay is 12.24 RMB ($1.84

USD) an hour, regular overtime is 18.36

RMB ($2.77 USD) an hour, and

overtime on weekends is 24.48 RMB

($3.69 USD) an hour. During off season,

there is no overtime.

Workers are not satisfied with their

salaries. They expect a monthly income

of 4,000 RMB ($603.46 USD) or more.

Workers make around 3,500 to 5,000

RMB (503.11–718.73 USD) each

month. Regular workers generally

make 110 RMB (15.81 USD) for each

of the 8 hours they work. The

investigator is unsure if there is

temporary work. The workers’ wages

are paid in accordance with

Shenzhen’s minimum wage standard.

Overtime is paid 1.5 times the lowest

base salary and weekends are paid

double.

Social Insurance For the social insurance, 7.46 RMB

($1.13 USD) is deducted for medical

insurance fees, 10.65 RMB ($1.60 USD)

is deducted for unemployment insurance

and, if the worker is enrolled in a

pension fund, an additional 170 RMB

($25 USD) is deducted.

The factory purchases “5 social

insurance and one housing fund” for

the workers. The percentage the

workers and factory pay is very

transparent: workers pay 180 RMB

(25.87 USD) per month for old-age

insurance and the factory pays 100

RMB per month for the housing fund.

Dining Conditions The cost of lunch and dinner averages to

5-10 RMB ($0.75- $1.50 USD) per meal

or 400 RMB ($60 USD) a month. Most

workers think the prices are unfair and

It is 6 RMB (0.86 USD) for 2 meat

dishes and 1 vegetable dish or 8 RMB

(1.15 USD) for 2 meat dishes and 2

vegetable dishes. Workers can choose


187

on the expensive side. The factory does

not provide meal allowances.

which option they want and fees will

be deducted from their wages

accordingly. Workers say the food is

average.

Accommodation

Conditions

Workers’ dormitories are equipped with

beds, closets, electric fans, and water

heaters. The accommodation fee is 40

RMB ($6 USD) per month, with water

and electricity bills split equally between

residents. The dorms do not have air

conditioning and there is only two

rotating electric fans hanging from the

ceiling.

There are 4 to 6 people per room.

There is no rent and air conditioning

and hot water is included.

Occupational

Safety and Labor

Protection


environmental, health, and safety

commission. However, there have been

some trainings on these topics. Some

workers are exposed to toxic chemicals

like acetone during work. Workshops

and dorms are equipped with first-aid

boxes, and toxic waste products are

sealed, labeled, and equipped with a fire

extinguisher.

Workers come into contact with

ethanol and naptha. The factory

provides finger covers and rubber

gloves.

a nightmare for workers: appalling conditions in toy factories … · 2019. 3. 6. · a nightmare...

Documents