a nexans company - bor enerjİ · 2018-12-19 · 158lr - elbow connector 152sr - straight connector...

Catalogue 2012

a Nexans company

http://www.borenerji.com

1

While every care is taken to ensure that the information contained in this publication is correct, no legal responsibility can be accepted for any inaccuracy. Nexans Network Solutions N.V. - Div. Euromold reserves the right to alter or modify the characteristics of its products described in this catalogue as standards and technology evolve.

EUROMOLDEuromold is the leading European specialised designer, manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution. Euromold provides a complete range of accessories for underground cables: premoulded EPDM rubber connectors for cables and epoxy bushings for transformers and switchgear, as well as a large range of cold-shrinkable terminations and joints from 12 to 42 kV.Euromold is also the manufacturer of electrical components for the high voltage accessories of the Nexans group.

ISO 9001 CertificateSince 1992, Euromold’s commitment to quality is demonstrated by its ISO 9001 certification.

Laboratory accreditationSince June 2000, Euromold’s independent ELAB laboratory obtained the BELAC accreditation no.144-TEST conform with the European standards for laboratories ISO 17025 for electrical testing of low and medium voltage cable accessories according to the international standards HD 623 and HD 629.

International standardsAll our products meet the International standards like CENELEC HD 629.1, CENELEC EN 50180, IEC 60137, IEC 60502-4… or country speci-fications. Official certificates, CESI, KEMA, ATEX… prove the conformity of our products. Long duration tests of existing or new products are con-tinuously performed in our test fields.

Nexans Network SolutionsDiv. Euromold

COMPANY PRESENTATION

2

01/2

012

SEPARABLE CONNECTORSAND BUSHINGS

INTERFACE A

Table of contents158LR - elbow connector152SR - straight connector151SP - straight plug156SA - surge arrester 180AR-1 /-2 /-3 and 180AR-1-G /-3-G - equipment bushings250SFR-P - equipment bushing180A-24P-O - in-air bushingPITO-E - plug-in terminationAccessoriesBail restraints

Interface ADimensions according to European CENELEC EN 50180 and 50181 (in mm).

48 0-0.2

Dia. 48.5±0.2

Dia. 32.5±0.2

Dia. forpin 7.9+0.02

- 0.05

Dia. 31+0.1 - 0.3

9min

3

Connecting possibilities

PITO-EPlug-in termination

(K)150DRDead-end receptacle

(K)150DRDead-end receptacle

(K)151SPStraight plug

BUSHINGS / ACCESSORIES /CONNECTOR

CONNECTION CONNECTORS /ACCESSORIES

(K)400RTPAReducing tap plug

(K)151SOPStand-off plug

(K)150DPDead-end plug

cable isolation

in-line junction + 2 tap-offs

tap-off630/250 A

disconnectable joint

in-line junction+ 2 tap-offs

in-line junction+ tap-off

cableinsulation

tap-off1250/250 A

250GPEarthing plug

(K)250SFR-PEquipment bushing

(K)180AR-1(-G),-2 & -3(-G)Equipment bushing

Equipment interface

cableearthing

(K)200TTee connector

(K)200XCross connector


one cable toequipment




in-line junction + tap-off

dead-ending of equipment

two cables to equipment

one line to equipment

three cables to equipment


(K)152SR(/G)Straight connector

(K)158LR(/G)Elbow connector

(K)152SR(/G)Straight connector

180A-24P-OIn-air bushing

(K)158LR(/G)Elbow connector

01/2

012

4

01/2

012

Specifications and standardsThe separable connector 158LR meets the requirements of CENELEC HD 629.1.

Up to 24 kV - 250 A

DesignSeparable connector comprising:1. Conductive EPDM insert.2. Conductive EPDM jacket.3. Insulating EPDM layer moulded between the insert and the jacket.4. Type A - 250 A interface as described by CENELEC EN 50180 and 50181.5. Conductor connector.6. Voltage test point.7. Earthing lead (-/G version only).

158LRINTERFACE A

ELBOW CONNECTOR

ApplicationSeparable elbow connector designed to connect polymeric insulated cable to equipment (transformers, switchgear, motors...).Also connects cable to cable, using the appropriate mating part.

6/10 (12) kV6.35/11 (12) kV

8.7/15 (17.5) kV12/20 (24) kV

12.7/22 (24) kV

Technical characteristics •ThethickconductiveEPDM

jacket provides a total safe to touch screen which ensures safety for personnel.•Eachseparableconnectoris

tested for AC withstand and partial discharge prior to leaving the factory.

Separable connector

type

VoltageUm(kV)

CurrentIr

(A)

Conductor sizes (mm2)

min max158LR/G

158LR

K158LR/G

K158LR

12

12

24

24

250

250

250

250

16

70

16

25

95

95

70

95

6

1

3

2

7

221 mm

160 mm

4

5

5

For adaptedbail restraints:

see 'Bail restraints and typical applications'.

For outdoorapplications.

Order: +MWS.

Components can be ordered individually.

For use withcopper tape

screened cables. Order: Kit MT.

For use with Alupe orC 33-226 cables.

Please contact our representative.

For use withother cable types.


The kit also comprises lubricant, wipers, installation instructions and crimp chart.

Ordering instructionsSelect the part number which gives the best centring to the cable core insulation diameter and substitute X using table X, according to the conductor size and type.Add a 'K' for use up to 24 kV.

Example:The copper wire screened cable is 24 kV, 50 mm2 stranded aluminium with a diameter over core insulation of 20.4 mm.Order a K158LR-FG-50(K)M-12-2+11TL elbow connector kit.

For an option with a bolted conductor contact,specify the ordering part number below.

Conductorsizes

(mm²)

Aluminium Copper

DIN hexagonal Deep indent DIN hexagonal

162535507095

- 25(K)M-12-2 35(K)M-12-2 50(K)M-12-2 70(K)M-12-2 95(K)M-12-2 *

-25KM-12-135KM-12-1

50(K)M-12-1*70(K)M-12-1*95(K)M-12-1*

16(K)M-11-225(K)M-11-235(K)M-11-250(K)M-11-270(K)M-11-295(K)M-11-2

Table X

Conductor

contact

164LRC-X

or

164LRMC-X

Pin contact

+ hex key

154LRF

Bail

restraint

150BA-B1

Connector housing

(K)158BLR-W

(K)158LR-W-X+11TL

connector kit for

larger sizesCable adaptor

11TL

Connector housing

(K)158BLR/G-WCable reducer

211CA

(K)158LR/G-W-Xconnector kit for

smaller sizes

Kit contentsThe complete (K)158LR or (K)158LR/G elbow connector kit comprises the following components:

* The 158LR-FB is not compatible with these conductor contacts.

Orderingpart number

Dia. over core insulation (mm)

min max

158LR/G-11-X158LR/G-13-X

158LR-FB-X+11TL158LR-FG-X+11TL158LR-GA-X+11TL158LR-GAB-X+11TL158LR-GH-X+11TL

12.614.617.518.419.721.023.2

16.118.720.221.222.523.826.4

Table W

Ordering part number Dia. over core insulation (mm) Conductor sizes (mm²)

158LR/G-13-25.95-14-5

158LR-GAS-50.95-14-5+11TL

14.6 - 22.7

19.7 - 25.4

35 - 70

25 - 95

Catalogue 2011

a Nexans company

1

02/2

011




Laboratory accreditationSince June 2000, Euromold’s independent ELAB laboratory obtained the BELAC accreditation no.144-TEST conform with the European standards for laboratories ISO 17025 for electrical testing of low and medium voltage cable accessories according to the international standards HD 623 and HD 629.




2

02/2

011

SEPARABLE CONNECTORSAND BUSHINGS

INTERFACE B

Table of contents400LR - elbow connector400TE - tee connector400T1 - equipment bushing400AR-1 - equipment bushing400AR-2 - equipment bushing400AR-8 - equipment bushing400SFR-P - equipment bushingAccessoriesPossible arrangements

Interface BDimensions according to European CENELEC EN 50180 and 50181 (in mm).

90±0.2

Dia. 46±0.2

Dia. 56±0.2

Dia. 70±0.2

40min

Dia. forpin 14 0

-0.04

11min

3 02/2

011


BUSHINGS / ACCESSORIES

CONNECTION CONNECTORS / ACCESSORIES

(K)(M)400DR Dead-end receptacle

(K)(M)400TE/GTee connector

(K)(M)400SOPStand-off plug

400GPEarthing plug

dead-ending of equipment

one cable toequipment

cableisolation

cableearthing


(K)(M)400CP-SC Connecting plug

two cables to equipment

tap-off630/250A

in-line junction

(K)(M)400LR/GElbow connector

(K)400SFR-PEquipment bushing

(K)(M)400AR-8Equipment bushing

Equipmentinterface


(K)(M)400T1Equipment bushing


4

02/2

011

Specifications and standardsThe separable connector 400LR meets the requirements of CENELEC HD 629.1.

Up to 36 kV - 400 A

DesignSeparable connector comprising:1. Conductive EPDM insert.2. Conductive EPDM jacket.3. Insulating EPDM layer moulded between the insert and the jacket.4. Type B - 400 A interface as described by CENELEC EN 50180 and 50181.5. Conductor connector.6. Cable reducer.7. Earthing lead.

The screen break design enables cable outer sheath testing without removing or dismantling the connector.

400LRINTERFACE B

ELBOW CONNECTOR

ApplicationSeparable elbow connector (plug-in type) designed to connect polymeric insulated cable to equipment (transformers, switchgear, motors...).

6/10 (12) kV6.35/11 (12) kV

8.7/15 (17.5) kV12/20 (24) kV

12.7/22 (24) kV18/30 (36) kV




210 mm

365 mm

4

5

1

2

3

7

6

Separable connector

type

VoltageUm(kV)

CurrentIr

(A)


min max400LR/G

K400LR/G

M400LR/G

12

24

36

400

400

400

50

25

35

240

240

185

5

Kit contentsThe complete (K)(M)400LR/G elbow connector kit comprises the following components:

The kit also comprises lubricant, wipers,

installation instructions and crimp chart.

Ordering instructionsSelect the part numberwhich gives the best centring to the cable core insulation diameter and substitute X using table X, according to the conductor size and type.Add a 'K' for use up to 24 kV and add an 'M' for use up to 36 kV.

Conductor

contact

400LRC-X

Pin contact

+ hex. key

400LRF

Bail

restraint

400BA

Connector housing

(K)(M)400BLR/G

Cable reducer

411CA-W

Orderingpart number


min max

400LR/G-11-X400LR/G-15-X400LR/G-19-X

400LR/G-22-X400LR/G-25-X400LR/G-27-X

12.0

16.0

20.0

23.5

26.5

28.5

17.5

22.0

26.5

31.0

32.5

37.5

Example:The copper wire screened cable is 12 kV, 150 mm2 stranded copper with a diameter over core insulation of 23.5 mm.Order a 400LR/G-19-150(K)M-11-2 elbow connector kit.

(K)(M)400LR/G-W-Xconnector kit

Table X

Table W

Conductorsizes

(mm²)

Aluminium Copper

DIN hexagonal Deep indent DIN hexagonal

25

35

50

70

95

120

150

185

240

-

35(K)M-12-2

50(K)M-12-2

70(K)M-12-2

95(K)M-12-2

120(K)M-12-2

150(K)M-12-2

185(K)M-12-2

240(K)M-12-2

-

35KM-12-1

50(K)M-12-1

70(K)M-12-1

95(K)M-12-1

120(K)M-12-1

150(K)M-12-1

185(K)M-12-1

240(K)M-12-1

25(K)M-11-2

35(K)M-11-2

50(K)M-11-2

70(K)M-11-2

95(K)M-11-2

120(K)M-11-2

150(K)M-11-2

185(K)M-11-2

240(K)M-11-2

For applicationsoutdoors and in humid climate.

Order: +MWS.






For use with fabric tape (graphite) screened cables.

Order additionalsemi-conductive tape

(type TSC).



Catalogue 2011

a Nexans company

1

08/2

011




Laboratory accreditationSince June 2000, Euromold’s independent ELAB laboratory obtained the BELAC accreditation no.144-TEST conform with the European standards for laboratories ISO 17025 for electrical testing of low and medium voltage cable accessories according to the international standards EN 50393, IEC 60502-4, IEC 61442 and HD 629.




2

08/2

011

SEPARABLE CONNECTORSINTERFACE C

Interface C1 & C2Dimensions according to European CENELEC EN 50180 and 50181 (in mm).

Table of contents430TB - tee connector484TB - tee connector300PBM - coupling connector430TBM-P2/P3 - dual/triple cable arrangement804PB - coupling connector300SA - surge arrester800SA - surge arrester400TR and 800TR - test rod400TK and 400SW installation toolsAccessoriesPossible arrangements

90±0.2

0-0.51.5

Dia. 22 min for C1Dia. 32 nominal for C2

Dia. 46±0.2

Dia. 56±0.2

Dia. 70±0.2

M16 x 2 - 6H

29min.

11min.

3 08/2

011


CONNECTIONBUSHINGS /ACCESSORIES

CONNECTORS /ACCESSORIES

(K)(M)300PBM/GCoupling connector

300SASurge arrester

dead-endingof equipment (K)(M)400DR-B

Dead-end receptacle

cableearthing

tap-off630/250A

in-linejunction

(K)(M)430TB/GTee connector

Equipmentinterface


400A-24BIn-air bushing

(K)(M)400SOP-BStand-off plug

400GP-BEarthing plug


(K)(M)400CP-SCConnecting plug

(K)(M)400SFR-BEquipment bushing




cable toequipment

cableisolation

(K)(M)484TB/GTee connector

(K)(M)804PB/GCoupling connector

800SASurge arrester

For information on our bushings please refer to our bushing catalogue.

4

08/2

011

ApplicationSeparable tee shape connector (bolted type) designed to connect polymeric insulated cable to equipment (transformers, switchgear, motors, ...).Also connects cable to cable when using the appropriate mating parts.

Technical characteristics•AthickconductiveEPDM

jacket provides a total safe to touch screen.

•Eachseparableconnectoristested for AC withstand and partial discharge prior to leaving the factory.

Specifications and standardsThe 430TB separable connector meets the requirements of CENELEC HD 629.1.

Up to 36 kV630 A (800 A)

430TBINTERFACE C

TEE CONNECTOR

6/10 (12) kV6.35/11 (12) kV

8.7/15 (17.5) kV12/20 (24) kV

12.7/22 (24) kV18/30 (36) kV19/33 (36) kV

DesignSeparable connector comprising: 1. Conductive EPDM insert. 2. Conductive EPDM jacket. 3. Insulating EPDM layer moulded between the insert and the jacket. 4. Type C interface as described by CENELEC EN 50180 and 50181. 5. Conductor connector. 6. Basic insulating plug (with VD point). 7. Cable reducer. 8. Conductive rubber cap. 9. Clamping screw. 10. Earthing lead.

The screen break designenables cable outer sheathtesting without removing ordismantling the connector.

185 mm

290 mm

(350 mmfor 36 kV)

4 9

6

1

2

3

10

7

5

8

Separable connector

type

VoltageUm(kV)

CurrentIr

(A)

Current Ir (A)Conductor sizes (mm2)

When installed on an appropriate equipment bushing and when using a copper (-11-2) or a

bolted (-12-5 or -14-5) conductor contact min max

430TB/GK430TB/GM430TB/G

122436

630630630

800800800

353550

300300240

5

3 x (K)(M)430TB/G-W-X connector kit

When installed on an appropriate equipment

bushing: 800 A continuously

Kit contentsThe complete (K)(M)430TB/G tee connector kit comprises 3 x the following components:

The kit also comprises silicone grease, field control mastic, installation rod, installation instructions and crimp chart.

Table W

Table X

Connector housing(K)(M)430BT/G

Cable reducer430CA-W

(411CA-Wfor 36 kV)

Clamping screw

430TCS



Orderingpart number

Voltage(Um)(kV)


min max

3 x 430TB/G-11-X3 x 430TB/G-16-X3 x 430TB/G-18-X

3 x K430TB/G-11-X3 x K430TB/G-16-X3 x K430TB/G-18-X

3 x M430TB/G-11-X3 x M430TB/G-15-X3 x M430TB/G-19-X3 x M430TB/G-22-X3 x M430TB/G-25-X3 x M430TB/G-27-X

121212

242424

363636363636

12.017.019.0

12.017.019.0

12.016.020.023.526.528.5

17.523.532.6

17.523.532.6

17.522.026.531.032.537.5

Ordering instructionsTo order the tee connector, select the ordering part number which gives you the best centring of your core insula-tion diameter and substitute X using table X, according to your conductor size and type.

Example:The cable is 24 kV, 150 mm2 compact stranded copper with a diameter over core insulation of 27.5 mm.Order 3 x K430TB/G-18-95.240-14-5 tee connector kit.

Conductorcontact TMBC-X

Conductor contact TBC-X






Order: +MWS.

For use witheasy strip semi-conductive screened cables. Order: Field control mastic

(type MFC).

Basic insulatingplug

(K)(M)300BIPA +rubber cap


Aluminium conductorAluminium and

copper conductorCopper

conductor

DINhexagonal

Deepindent

BoltedDIN

hexagonal

35 35(K)M-10-2 35KM-10-1 35(K)M-11-250 50(K)M-10-2 50(K)M-10-1 50(K)M-11-270 70(K)M-10-2 70(K)M-10-1 70(K)M-11-295 95(K)M-10-2 95(K)M-10-1 95(K)M-11-2120 120(K)M-10-2 120(K)M-10-1 120(K)M-11-2150 150(K)M-10-2 150(K)M-10-1 150(K)M-11-2185 185(K)M-10-2 185(K)M-10-1 185(K)M-11-2240 240(K)M-10-2 240(K)M-10-1 240(K)M-11-2300 300(K)M-10-2 – 300(K)M-11-2

16.9

5-14

-5

50.1

50-1

4-5

95.2

40-1

4-5

120.

300-

12-5

6

08/2

011

Up to 42 kV630 A (1250 A)

484TBINTERFACE C

TEE CONNECTOR




ApplicationSeparable tee shape connector (bolted type) designed to connect polymeric insulated cable to equipment (transformers, switchgear, motors, ...).Also connects cable to cable when using the appropriate mating parts.

DesignSeparable connector comprising: 1. Conductive EPDM insert. 2. Conductive EPDM jacket. 3. Insulating EPDM layer moulded between the insert and the jacket. 4. Type C - interface as described by CENELEC EN 50180 and 50181. 5. Conductor connector. 6. Basic insulating plug (with VD point). 7. Cable reducer. 8. Conductive rubber cap. 9. Clamping screw. 10. Earthing lead.


Specifications and standardsThe 484TB separable connector meets the requirements of CENELEC HD 629.1.

Separable connector

type

VoltageUm(kV)

CurrentIr

(A)

CurrentIr (A)

When installed on anappropriate equipment bushing


min max484TB/G

K484TB/GM484TB/GP484TB/G

12243642

630630630630

1250125012501250

50353535

630630630630

185 mm

4 9

1

2

3

10

7

360 mm

5

6

8

6/10 (12) kV6.35/11 (12) kV

8.7/15 (17.5) kV12/20 (24) kV

12.7/22 (24) kV18/30 (36) kV19/33 (36) kV

20.8/36 (42) kV

7

Ordering instructionsTo order the tee connector, select the ordering part number which gives you the best centring of your core insula-tion diameter and substitute X using table X, according to your conductor size and type.Add a 'K' for use up to 24 kV, add an 'M' for use up to 36 kV, add a 'P' for use up to 42 kV.

Example:The copper wire screened cable is 36 kV, 240 mm2 stranded aluminium with a diameter over core insulation of 37.0 mm.Order 3 x M484TB/G-32-240(K)M-12-2 tee connector kit.

Orderingpart number


min max

3 x 484TB/G-15-X3 x 484TB/G-19-X3 x 484TB/G-22-X3 x 484TB/G-27-X3 x 484TB/G-32-X3 x 484TB/G-37-X3 x 484TB/G-43-X

16.020.023.528.534.039.045.5

22.026.531.037.542.548.556.0

Table W

Kit contentsThe complete (K)(M)(P)484TB/G tee connector kit comprises 3x the following components:

The kit also comprises silicone grease, field control mastic, gloves, roll adhesive tape, installation instructions and crimp chart.

(K)(M)(P)484TB/G-W-Xconnector kit

Connector housing(K)(M)(P)484BT/G

Clampingscrew

430TCSCable reducer

611CA-W



Basic insulatingplug

(K)(M)(P)800BIPA+ rubber cap

When installed on an appropriate equipment

bushing: 1250 A continuously







Order: +MWS.

For use with copperwire screened cables.

No earthingdevice is

necessary.

Table X

Conduc-tor sizes (mm2)



conductor

DINhexagonal

Deepindent

BoltedDIN

hexagonal

35

50

70

95

120

150

185

240

300

400

500

630

35(K)M-12-2

50(K)M-12-2

70(K)M-12-2

95(K)M-12-2

120(K)M-12-2

150(K)M-12-2

185(K)M-12-2

240(K)M-12-2

300(K)M-12-2

400(K)M-12-2

500(K)M-12-2

–

35KM-12-1

50KM-12-1

70KM-12-1

95KM-12-1

120KM-12-1

150KM-12-1

185KM-12-1

240KM-12-1

300KM-12-1

400KM-12-1

500KM-12-1

630KM-12-1

35(K)M-11-2

50(K)M-11-2

70(K)M-11-2

95(K)M-11-2

120(K)M-11-2

150(K)M-11-2

185(K)M-11-2

240(K)M-11-2

300(K)M-11-2

400(K)M-11-2

500(K)M-11-2

630(K)M-11-2

16.9

5-14

-5

95.2

40-1

4-5

50.1

50-1

4-5

120.

300-

12-5

8

08/2

011

ApplicationSeparable coupling connector (bolted type) for dual cable arrangement. It has been designed to be used with 430TB separable Tee connector.

Technical characteristics•AthickconductiveEPDM

jacket provides a total safe to touch screen.

•Eachseparableconnectoristested for AC withstand and partial discharge prior to leaving the factory.

Up to 36 kV630 A (1250 A)

300PBMCOUPLING CONNECTOR

FOR 430TB/G

Specifications and standardsThe 300PBM coupling connector meets the requirements of CENELECHD 629.1.

Design 1. Interface designed to fit 430TB connector. 2. Bus for 300PBM. 3. Conductive EPDM insert. 4. Insulating EPDM layer moulded between the insert and the jacket. 5. Conductive EPDM jacket. 6. Conductive EPDM cap. 7. Basic insulating plug (with VD point). 8. Conductor connector (hexagonal crimping, deep indent crimping or bolted). 9. Cable reducer. 10. Earthing lead.


290 mm(350 mmfor 36 kV)

105 mm

300PBMcouplingconnector

290 mm

1

2

3

4

5

9

7

6

10

430TBconnector

8

6/10 (12) kV6.35/11 (12) kV

8.7/15 (17.5) kV12/20 (24) kV

12.7/22 (24) kV18/30 (36) kV19/33 (36) kV

Separable connector

type

VoltageUm(kV)

CurrentIr

(A)

Current Ir (A)Conductor sizes (mm2)

When installed on an appropriate equipment bushing and when using a copper (-11-2) or a

bolted (-12-5 or -14-5) conductor contact min max

300PBM/GK300PBM/GM300PBM/G

122436

630630630

125012501250

353550

300300240

9

Kit contentsThe complete (K)(M)300PBM/G coupling connector kit comprises 3 x the following components:

The kit also comprises silicone grease, field control mastic, installation rod, installation instructions and crimp chart.



For use witheasy strip semi-conductive screened cables. Order: Field control mastic

(type MFC).

For use with copperwire screened cables.

No earthingdevice is

necessary.



For outdoorapplications.

Order: +MWS.

Connector housing(K)(M)300BP/G

For use with fabric tape (graphite) screened cables.

Order additionalsemi-conductive tape

(type TSC).

Contact rod 300PB-CR

3 x (K)(M)300PBM/G-W-X coupling connector kit

Cable reducer430CA-W

(411CA-Wfor 36 kV)



Table W

Table X

Orderingpart number

Voltage(Um)(kV)


min max

3 x 300PBM/G-11-X3 x 300PBM/G-16-X3 x 300PBM/G-18-X

3 x K300PBM/G-11-X3 x K300PBM/G-16-X3 x K300PBM/G-18-X

3 x M300PBM/G-11-X3 x M300PBM/G-15-X3 x M300PBM/G-19-X3 x M300PBM/G-22-X3 x M300PBM/G-25-X3 x M300PBM/G-27-X

121212

242424

363636363636

12.017.019.0

12.017.019.0

12.016.020.023.526.528.5

17.523.532.6

17.523.532.6

17.522.026.531.032.537.5

Ordering instructionsTo order the coupling connector, select the ordering part number which gives you the best centring of your core insula-tion diameter and substitute X using table X, according to your conductor size and type.

Example:The cable is 24 kV, 150 mm2 compact stranded copper with a diameter over core insulation of 27.5 mm.Order 3 x K300PBM/G-18-95.240-14-5 coupling connector kit.




conductor

DINhexagonal

Deepindent

BoltedDIN

hexagonal

35 35(K)M-10-2 35KM-10-1 35(K)M-11-250 50(K)M-10-2 50(K)M-10-1 50(K)M-11-270 70(K)M-10-2 70(K)M-10-1 70(K)M-11-295 95(K)M-10-2 95(K)M-10-1 95(K)M-11-2120 120(K)M-10-2 120(K)M-10-1 120(K)M-11-2150 150(K)M-10-2 150(K)M-10-1 150(K)M-11-2185 185(K)M-10-2 185(K)M-10-1 185(K)M-11-2240 240(K)M-10-2 240(K)M-10-1 240(K)M-11-2300 300(K)M-10-2 – 300(K)M-11-2

16.9

5-14

-5

50.1

50-1

4-5

95.2

40-1

4-5

120.

300-

12-5

Zümrütevler Mh. Karayemiş Sk., REF PLAZA No:26 Kat:2 D:3 MALTEPE/İSTANBUL Telefon : 444 3 168E-Posta : [email protected]

http://www.borenerji.com

a nexans company - bor enerjİ · 2018-12-19 · 158lr - elbow connector 152sr - straight connector...

Documents