a complete family of reliable lubrication equipment · a complete family of reliable lubrication...

A Complete Family of Reliable Lubrication Equipment

Real Solutions for Real PeopleField-Proven Performance Designed to Save You Money

1

Petroleum Management Group Products

LD Blue Electric Pumps LD Blue Manual Pumps SD Blue AODD Pumps LD Blue Meter SDI15 In-Line Meter LD Blue Automatic Dispense Nozzles SD Blue Dispense Nozzles

Graco Diesel Exhaust Fluid (DEF) Dispensing Solutions

• Reliable, industrial pump with self-priming capabilities

• 120V or 12V electric pump• Maximum flow rate of 9 gpm

(120V) or 9.5 gpm (12V)• 120V pump includes auto shut-

off timer

• Lightweight, reliable, and cost-effective solution for dispensing DEF from 55 gallon drums

• Quick drum installation and change out with integrated two inch bung adapter

• Fast delivery capable of 11 oz. per stroke

• Adjustable telescoping down tube

• Superior-performing AODD pump capable of higher output over longer runs

• Maximum flow rate of 15 gpm• Rugged construction resists

corrosion for reliable performance and long life

• Easy-to-service air valve and ball checks

• Easy to install – use in-line or at the end of the dispense hose

• Impulse signals – single channel, or reed switch

• 1.3 - 26.4 gpm flow rate • 145 psi maximum pressure• 1” BSPP(m) inlet and outlet• Includes 1” BSPP(f) coupler

• Easy to use for DEF solutions (in addition to motor oils, ATF, and anti-freeze) – dispenses pints, quarts, liters, or gallons

• Tracks totals in two modes – reset for periodic history and non-reset for meter life

• Durable design for rugged, indoor use

• 0.1- 14 gpm flow rate• 1500 psi maximum pressure

• Break-Away System for low-cost repairs if the spout becomes detached

• Choose with or without built-in meter

• 4 -12 gpm flow rate• 50 psi maximum pressure• 3/4” BSPP inlet

• Heavy duty design • Automatic shut-off valve with

stainless steel nozzle• 11 gpm flow rate • 50 psi maximum pressure• 3/4” BSPP inlet

Reel Enclosures SD Cord and Light Reels LD Series SD Series 10/20 XD Series 10/20/30 XD Series 40/50 XD Series 60/70/80 Powered Reels

Graco Hose and Cord Reels

• Enclosures provide protection to extend the life of hoses and bearings

• Designed for enclosing the SD single pedestal reels

• End caps are easily removed for easy access to reels

• Enclosure mounting channels available to accommodate one to six reels

• High-strength steel construction for professional use

• Handles cord lengths up to 95 ft (29 m)

• Fluorescent or LED light with optional tool tap receptacle

• Duplex GFCI industrial or single Industrial receptacle cord reels

• Meets UL355*, CSA22.2 No. 21 and IP44 standards

• Designed for small service garages and repair shops

• Handles hose lengths up to 50 ft (15 m)

• Enclosed for safety and protection; extends hose life

• Multiple mounting options, including ceiling/wall, tote, bench or wall-mount post

• Easy spring tension adjustment• Full-flow swivel maximizes fluid

flow with minimal pressure drop

• Designed for daily use applications such as dealerships, fleet services and maintenance facilities


• Long-lasting spring provides constant spring torque through the entire range of motion

• Multiple mounting options• Durable steel spool for demanding

applications• Open swivel ports ensure high fluid

flow with minimal pressure loss

• Designed for robust, heavy-duty applications


• Dual pedestal frame provides increased strength for extreme-duty applications

• Long lasting spring is sealed for protection against the weather

• Durable steel spool rides on sealed roller bearings to ensure trouble-free performance

• Designed for robust, heavy-duty applications


• Fully ported swivel and shaft for unrestricted flow

• Heavy-duty ball bearings outlast sleeved-type bearings

• Easy rewind with minimal hose guidance

• Overhead mounting kit available

• Designed for robust, heavy-duty applications with powered rewind


• Hydraulic, electric, and pneumatic direct drive options

• Fully ported swivel and shaft for unrestricted flow

• Industrial-grade paint for high abrasion and corrosion resistance

Pro-Shot Control Valve SDV15 Control Valve XDV20 Control Valve Mechanical Meter XDM6 and XDM12 Meters LDM and LDP Meters SDM and SDP Meters

Graco Meters and Dispense Valves

• Rugged design for harsh environments

• Pressure-assisted trigger for ease of operation

• Easy top adjustment with locking nut

• Multiple adapters available• Working pressure up to 8,000

psi (552 bar)

• Dispenses motor oils, ATF, gear lube and anti-freeze

• Sturdy cast body designed for use in tough environments

• Lock-on trigger• Indoor or outdoor use• Multiple extensions available• 1,500 psi (103 bar)• Handles up to 15 gpm (57 lpm)*


• High flow valve• Sturdy cast body designed for

use in tough environments• Twist-lock-on/off trigger• Indoor or outdoor use• Multiple extensions available• 1,500 psi (103 bar)• Handles up to 20 gpm (76 lpm)*

• Dispenses a variety of petroleum and synthetic based oils and anti-freeze

• Manual and pre-set dispense• Indoor and outdoor use• 1,500 psi (103 bar)• Handles up to 8 gpm (30 lpm)*

• Durable design ideal for oil dispense in harsh environments

• Screw-tight nozzle for positive shut off

• Ball bearing swivel for ease of use• Reset capable for periodic

dispense history information• Operating Temperature Range:

-40 to 180º F (-40 to 82º C)• 1,500 psi (103 bar)• Handles up to 12 gpm (45 lpm)*


• Manual and pre-set dispense models

• Automatic nozzle only• Indoor use• Multiple extensions available• 1,000 psi (69 bar)• Handles up to 5 gpm (19 lpm)*


• Manual and pre-set dispense models

• High flow• Indoor or outdoor use• Multiple extensions available• 1,500 psi (103 bar)• Handles up to 14 gpm (53 lpm)*

Fast-Ball® LD Pump Mini Fire-Ball® 225 Fire-Ball® 300 Fire-Ball® 425 NXT™ Supply Systems Husky™ Diaphragm Pumps

Graco Pumps

• Ideal for lower volume, short-run transfers

• Handles up to 5 gpm (19 lpm)*• Ratio for oil: 1:1

• Ideal for low- to medium-volume applications

• Built-in thermal relief to protect product

• Handles up to 7.8 gpm (30 lpm)*• Ratio for oil: 3:1, 5:1• Ratio for grease: 50:1

• Ideal for low to medium volume applications

• In-line design with fewer parts for minimal pump wear, less downtime and maintenance

• Handles up to 2 gpm (7.5 lpm)*• Ratio for oil: 3:1• Ratio for grease: 50:1

• Ideal for medium volume, high-pressure fluid transfer

• High quality, corrosion-resistant design for longer pump life

• Handles up to 3 gpm (11 lpm)*• Ratios for oil: 5:1 • Ratios for grease: 15:1, 50:1

• Ideal for the most demanding high-volume applications

• Also available in 55 gal (200 l), 120 lb (55 kg) or 400 lb (180 kg) cover-mounted packages for lube trucks

• Up to 13 gpm (49 lpm)*• Ratios for oil: 3:1, 6:1, 10:1• Ratios for grease: 50:1, 75:1

• Ideal for bulk transfer–moves fluids fast! 31 gallons of oil or 57 pounds of grease per minute

• Ratios for oil: 3.5:1, 4.5:1, 6:1, 10:1 ,12:1 and 23:1

• Ratios for grease: 14:1, 26:1, 29:1, 55:1, 63:1, 68:1

• Simple, reliable transfer pumps ideal for oil, used oil, windshield wash, anti-freeze and fuel

• Flow rates: 7-275 gpm (27-1041 lpm)

• Packages designed specifically for pre-mixed windshield wash also available

22

State-of-the-Art DesignEach product in the LD family has innovative features built-in, plus advanced technologies designed to save you money and provide reliable performance and long life at a competitive price.

More ConfigurationsChoose drum, tote or wall mount applications with multiple meter, pump and reel choices.

Industry Leading WarrantyGraco offers one of the best warranties in the business – 5 years on all our LD Series family products.** Two years on LD Meter electronics

Everything you need right out of the boxChoose from a variety of dispense solutions. From the economical drum package to the high-performance tote packages, every solution is designed with the highest quality components for trouble free operation.

Performance Runs in the Family

LD Pump, Reel and Meter

Professional Fluid Transfer Technology

Pilot ValvePatent-pending self cleaning design increases reliability in dirty air environments and minimizes pressure drop with rapid changeovers for reduced stalling and smoother flow.

Three Inch Air MotorProvides more power to create better flow.

Adjustable Bung Adapter IncludedBuilt-in slide adjustment with easy-set hand screws is easier to fit into more applications.

Engineered for DurabilityPatent-pending cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.

NXT Air ValveDesigned to reduce icing in continuous use applications and uses less air than competitive pumps for better efficiency. Easy to repair or replace without tearing down internal pump components for less downtime.

Modular Air ValveAir inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.

Built-In Thermal Relief and Inlet StrainerBuilt-in thermal relief (oil only) protects your equipment from thermal expansion without the need to buy and install an additional kit. Inlet strainer (oil only) is built-in to protect pump from containments that can damage your pump.

3

The complete package– everything you need to get up and running fast.

All packages come with quick changeover inlet kit, air controls, air-operated double diaphragm pump, supply hose and auto shut-off nozzle. Simple bolt together assembly with no special tools.

Why Graco?Value built-in Choose from a variety of dispense solutions. From the economical drum package to the high-performance tote packages, every solution is designed with the highest quality components for trouble free operation. Uses long lasting BSPP seals for fewer leaks and a clean work environment. Field-proven pump provides years of reliable operation.

Efficient, money saving operation Versatile Husky 515 pump delivers up to 15 gpm (57 lpm) works on as little as 20 psi (1.4 bar) for money saving efficiency and is capable of 50 psi (3.4 bar) to provide high output over a long run of hose or piping. Powerful design has superior suction and lift for deep tanks or totes. Choose the best of both in one pump – power plus efficiency.

Clean transfer solution Quick change inlet kit provides strong seal between drum coupler and insert to prevent tank to tank contamination–easy to disconnect pump from empty tank leaving behind contaminated down tube.

Everything you need right out of the box A cost-effective system designed to serve multiple markets and applications. Choose from three configurations to fit your needs.

Note: In-line meter is optional. Check ordering information for the package that best fits your needs.

Choose from more configurations to get exactly what you need for your business.

Tote Mount

Wall Mount

Drum Mount

DEF Dispensing Systems

4

Fluid dispense and inventory control at your fingertips for petroleum, synthetic oil products and anti-freeze mixtures

Select Application Software Matrix offers three software platforms using the Matrix meter including Premier, Professional and Basic.

Include a Transceiver Sends and receives information from the meters, Tank Level Monitors and Pump Air Control to the work station.

Security with the Pump Air Control Supplies air to the pump only when Matrix authorizes the dispense.

Performance of the Matrix Meter The Matrix Meter dispenses fluid and communicates dispense information wirelessly to the PC.

The Time-Saving Tank Level Monitor Ultrasonic signal accurately measures fluid levels and communicates to used oil recyclers or bulk fluid suppliers.

5 Steps to Choose Your System

Tracking dispenses right to the work order saves time and eliminates lost inventory

Pum

p Ai

r Con

trol

3

Ta

nk Level Monitor

5

4

Meters

Transceiver

2

Work Station

1

Ideal for car dealerships, truck dealerships, off-road maintenance shops, including mining and construction, fleet facilities, fast lubes, service shops and in-plant applications

Matrix® Total Fluid Management System™

12345

5

Pumps for Any Industrial Application

With Graco automatic lubrication systems you get: • Increased productivity—longer machine life and reduced downtime

• Reduced operating costs—reduced repair labor and component costs

• More efficient lubrication—small, carefully controlled amounts when needed

EXAMPLE: Infrequent filling of the bearing results in periods of over and under lubrication

EXAMPLE: Maintain optimal lubrication by replenishing only the lubricant that is used, with small amounts at frequent intervals

Automatic LubricationManual Lubrication

Amou

nt

Time

Amou

nt

Time

Optimal Lubrication

Graco Automatic Lubrication Systems apply the correct amount of lubrication in the right place at the right time

Under Lubrication• More component wear• Higher energy usage• Increased operating costs

Over Lubrication• Excess heat build-up• Wasted lubricant• Unnecessary labor cost

From your smallest jobs to your largest machines, Graco pumps are at the heart of any centralized lubrication system. Add a wide variety of quality metering devices, controllers and accessories to get a complete system for nearly any performance, input power or mounting requirement.

With Graco you can be sure every piece of equipment in your plant gets the right amount of lubrication where and when it needs it.

The Ultimate in Centralized Lubrication Pumps

6

Dyna-Star® Hydraulic Pump

Long-lasting, flexible design saves money and is easy to use and install • Achieve full pressure performance by safely tapping low pressure hydraulics• Pre-packaged modules ready-to-work with both injector and divider valve systems• Multiple pump and accessory options for use with refinery drum and custom tank

installations • Self-lubricating for long life and reliable operation• Ultra-quiet hydraulic motor - no need for add-on mufflers• High efficiency motor design uses less hydraulic oil

Level Indicator• Positive, at-a-glance indication

of reservoir lubrication level

• Auto shut-down when low level is reached

Field-Proven Graco Fire-Ball®

Grease Pump LowerDouble-acting piston design - the industry standard for long life

Follower PlateInnovative design forces grease into the pump for consistent operation

Center-Feed Vent and Refill PortLocated below follower plate for trouble-free venting and refilling

Built-In GaugeConveniently monitor hydraulic output pressure

Pressure and Flow ControlAbility to adjust pressure and flow puts you in control

Rugged Digital ControllerFull featured performance—time- or pressure-based control to monitor reservoir levels and system pressure

Pressure SwitchLets the controller know when optimum system pressure is reached ensuring complete lubrication cycle

GL-1 and GL-11 Injectors• Exclusive seal design for up to

30% longer life

• Field adjustable output for most every application

Trabon® Divider Valve Assembly• Accurately meters lubrication to each point

• Add performance indicators to ensure vital components have been lubricated

For optimal system performanceNLGI #1 grease is recommended

Detail of back side of module assembly.

7

G3™ Electric Pumps

Introducing the G3 electric lubrication pumpWith its flexible design, including adjustable pump elements and an ability to work with both injector-based and series progressive systems, G3 is a rugged, cost-effective pump designed to serve multiple markets and applications. Three control choices also mean added flexibility for easy lube system set-up, operation and troubleshooting. Extend machinery life, reduce operating costs and increase productivity with a G3 today!

Powerful pumping performance

• G3 delivers up to 5100 psi (352 bar) for handling NLGI #2 grease, even in cold temperatures

Two reservoir styles to choose from

• Stirring paddle with wiper arm breaks up air pockets and helps prevent grease separation

• Follower plate design allows for operation in any orientation; includes stirring paddle to help prevent grease separation

One, two or three pump elements

• G3 comes standard with one pump installed• Add up to two more pump elements for higher output

on large projects

AC and DC power choices - G3 makes it easy!

• Flexibility to connect to DC (12 or 24V) and AC (90-240V) power sources in both CPC and DIN-style connectors

Two-in-one versatility• Use with Series Progressive or Injector

based systems or a combination of both –all from one pump

InjectorsSeries Progressive

IP69K

Adjustable stroke pumpG3 comes standard with an adjustable output pump. Its straight- forward design makes increasing or decreasing the pump displacement as simple as adding or removing a Stroke-Adjust Spacer.

• No need to purchase additional fixed output pump element sizes to meet your specific lube requirements

• No need to purchase a separate, high-priced adjustable output pump–with G3, adjustability comes standard!

8

G3™ Electric Pumps

G3 Standard

• No internal controller–use with separate or existing machine control for a low cost solution

• Capable of sending a low level signal to your external controller or PLC

G3 Pro

• Built-in controller with selectable pump on/pump off timer

• Low level indicator provides low warning and shut-down alarm

• Manual run initiates lube cycle on-demand (remote option also available)

• Password protection safeguards settings

• Pre-lube function can initiate lube cycle on start-up

G3 Max

• Built-in controller with selectable pump on/pump off timer

• Low level indicator provides low warning and shut-down alarm

• Manual run initiates lube cycle on-demand (remote option also available)

• Password protection safeguards

• Pre-lube function can initiate lube cycle on start-up

• Up to three pressure or cycle switch inputs to ensure proper lubrication cycles

• Mix/match cycle and pressure switches for custom installations and feedback

• Machine count input–ideally suited for inconsistently used equipment

• Fault indication to external alarms

• Optional Data Management System™ (DMS)

Standard, Pro and Max Choose the level of control you need for your series progressive or injector based applications.

Tech SpecsMax Pressure ............................ 5100 psi (352 bar)

Power ...................... 12 VDC, 24 VDC, 90-240 VAC

Operating Temperature -13 to 158 ºF (-25 to 70 ºC)

Reservoir Size........................ 2, 4, 8, 12, or 16 liter

Adjustable Pump Output Per Element Per Minute ....

0.12 in3, 0.18 in3,, 0.25 in3 (2 cm3, 3 cm3, 4 cm3)

Lube Type ................... Oil or Grease, up to NLGI #2

Certifications/Ratings ......................CE, ETL*, IP69K*Conforms to UL 73, certified to CSA 22.2 No. 68-09

Instruction Manual .....................................3A0414

Check out the full-featured G3 MaxEasy-to-read LED display

Clearly identified pump on/off indication

Monitoring of up to three independent zones

Programmable machine count feature

Alarm signal of lube system shutdown

Warning signal prior to lube system shutdown

Low level indication

Password protected access to control

Pre-lube capability

Easy-to-use navigation keys

1

6

7

8

9

10

2

3

4

5

1

6

7

8

9

10

2

3

4

5

9

Dyna-Star® HP and Dyna-Star® HF Electric Lubrication PumpsNew innovations, like tube-in-tube vent and fill path, Advantage Drive™, auto-fill shut off, and adjustable motor controls give you mobile lubrication capabilities like never before. Super-efficient design delivers the right amount of lubrication at the right time–all in a neat, compact system.

Versatile and Hassle Free• 24 VDC electric lubrication pump• Supplies grease to injector-based, series progressive and dual line

metering systems• High pressure (HP) model is capable of 5,000 psi (344 bar) with a

maximum output of 18 cubic inches (295 cc) per minute• High flow (HF) model is capable of 3,500 psi (241 bar) with a

maximum output of 25 cubic inches (410 cc) per minute

Top Quality Lubrication for:• Mining Operations• Heavy-duty Construction• Industrial Applications • Milling and Crushing• Well Services

Auto Fill Shut Off

Choose Your Level of ControlLow LevelQuick visual level indication with electronic signal to GLC 2200 or GLC 4400 controller

Avoid over- or under-filling with this cost-effective mechanical solution. Visual indication of a full reservoir or connect to proximity switch for electronic indication.

Dip StickFor visual indication of lube level

Power Input

Signal Input from GLC Controller

Status Lights for easy troubleshooting

Current Control to fine-tune motor amperage

Motor Speed Adjustment to match lube requirements to your environment

Cavitation-free Fill and Vent PathProvides simple and direct venting and filling to the foot of the pump. No cavitation due to improper filling and venting with no external vent hoses or extra internal pipes. Convert a standard drum to an injector pump station in minutes.

Direct Mount Electric Vent ValveMounts directly to pump with no special brackets or hoses for a compact design and less parts to break or wear out. Deutsch connector is IP69K rated to keep out moisture. Built-in pressure relief for safety and compact, efficient installations.

Safely Move PumpBuilt-in lift ring is rated to 500 lbs (226 kg)

Graco Advantage Drive™High quality helical hardened steel gears

are lubricated for life and sealed to keep contaminants out for longer lasting

performance. Field-proven for the last ten years to be the longest lasting drive in the

industry.

Strong 12 Gauge Steel ReservoirAvailable in 60 lb (27 kg) or 90 lb (41 kg) reservoirs with alternate fill and vent ports that deliver lube straight to the bottom of the pump. Common bolt pattern for easy drop-in replacement without drilling or adapter plates.

Adjustable Motor Control

Auto Fill Shut OffInnovative mechanical design that physically actuates a shut off of the fill pump for clean, trouble-free refilling. No electronics necessary, but proximity switch can be added for electronic signal for full reservoir.

10

LubePro™ Series Pumps

Field-Proven ReliabilityFor nearly 50 years, Graco Fire-Ball™ pumps have been a mainstay in the lubrication marketplace for durability and long life. Designed for the tough-est applications, the Fire-Ball™ repeatedly outperforms and outlasts the competition. LubePro™ series pumps leverage the same proven quality and leading technology.

Designed to PerformLubePro™ series pumps offer a robust solution where high output and fast lubrication cycles and flow rates are needed to optimally lubricate equip-ment while it’s working. Our robust design has been tested to outperform the competition.

Positive Impact to Your Bottom LineLubePro™ is the choice of lubrication professionals, because it positively impacts your company’s bottom line by automatically providing the optimal amount of lubrication at the right time.

• Extends equipment life• Improves productivity• Reduces downtime

• Reduces repair costs• Reduces operating costs• Improves employee safety

LubePro™

HorizontalPumps

High-strength, shatter-resistant reservoirUtilizes a high-quality, polycarbonate reservoir that is securely mounted to the pump with rigid tie rods for optimal sealing

Two reservoir types2 liter reservoir available in grease or oil. Select from the 19:1 oil pump or the 26:1 grease pump.

Fast cycle rate and flowCycles and vents lubricant injectors in as little as 10 seconds. 2.2 in3 of grease per stroke and 3.0 in3 of oil per stroke.

Easy to installUtilize existing mounting holes for easy replacement and installation

Low level detection optionReliable, Graco factory-installed low level indicator that is easy to connect using a simple DIN connection

Self-venting pumpIntegrated vent automatically and reliably relieves pressure on return stroke, no pressure switch or wiring required

Fire-Ball™ pump castingLeverages the proven quality and long life of Graco’s Fire-Ball™ pump. Eliminates tie rods and end cap.

No priming requiredNo need to bleed the valve to prime the pump, no priming is required

Pneumatic PowerEasily installed into existing air line

Vertical Pumps are also available

11

Features• Series progressive metering in a one piece block–no assembly required!• Space efficient design with 6, 8, 10, 12, 14, or 16 outlets. Outlets can be combined to meet larger

bearing needs• Requires no special fittings, all fittings come with the valve block• Built-in outlet check valves ensure accurate lube delivery, every time• Works with standard MSP magnetic and electronic proximity switch cycle indicators to provide

positive assurance of a successful lube event

Typical Application Mobile, industrial, food & beverage, wind, and many more

Trabon USP is an economical option to solving your lubrication system needs. It serves as a high quality entry point to move away from manual lubrication, and is smaller than competitive mono blocks to save valuable machine space.

Trabon® USP–Uniblock Series Progressive

Trabon® MD Series

Features• Available with 2, 3, 4, or 6 outlets• Easy to install on new or existing equipment• Use our cycle indicator pin models to provide positive

assurance of a successful lube event

Typical Application Industrial or mobile applications where space is at a premium

The Trabon MD Series is the most compact series progressive solution making it a perfect fit for tight spaced applications.

Trabon® MSP Series

Features• Quick change valve sections can be removed from the base assembly without disturbing any lube

lines – minimizing labor cost and maximizing your machine uptime• Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to

provide positive assurance of a successful lube event• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the

guesswork out of troubleshooting

• Built-in outlet check valves ensure accurate lube delivery, every time

Typical Application Mobile, industrial, food & beverage, wind, and many more

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve – and is still the best!

Trabon® MJ Series

Features• Space efficient–from 6 to 16 points from one block assembly• Built-in outlet check valves ensure accurate lube delivery, every time• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the

guesswork out of troubleshooting• Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to

provide positive assurance of a successful lube event

Typical Application Machine tools, textile, glass & can machinery, & mobile equipment

The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.

Series Progressive Divider Valves

Pre-Assembledand Tested

Base Plates Now Available!

12

Series Progressive Divider Valves

Same capable design as the Trabon MSP Series, with even tighter and more exacting tolerances. The Manzel MHH Series delivers highly accurate lube delivery for demanding high pressure oil applications.

Manzel® MHH Series

Features• Quick change valve sections can be removed from the base assembly without disturbing any

lube lines – minimizing labor cost and maximizing your machine uptime• Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to


guesswork out of troubleshooting

• Built-in outlet check valves ensure accurate lube delivery, every time

Typical Application Compressors, industrial equipment, textile and mobile equipment

Trabon® MX Series

Features• Durable design withstands harsh environments and operating conditions• Built-in outlet check valves ensure accurate lube delivery, every time• Can be easily accessorized with magnetic and electronic proximity switch cycle

indicators to provide positive assurance of a successful lube event• Alternate outlet on face of valves can be fitted with optional performance

indicators, taking the guesswork out of troubleshooting

Typical Application Pulp and paper, steel mills, heavy and high volume industrial applications

Greater output volumes for heavy service requirements make the Trabon MX Series ideal for steel and paper mill systems with it’s economical and compact design.

Pre-Assembledand Tested

Base Plates Now Available!

Trabon® MXP SeriesThe Trabon MXP Series’ greater output volume makes it easy to customize your assembly to meet larger machine requirements.

Features• Quick change valve sections can be removed from the base assembly without disturbing any lube

lines – minimizing labor cost and maximizing your machine uptime• Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to


guesswork out of troubleshooting• Built-in outlet check valves ensure accurate lube delivery, every time


Trabon® MGO Series

Features• Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to


guesswork out of troubleshooting• Robust design is virtually indestructible and built to perform in extreme environments


The Trabon MGO Series offers the largest output available in a series progressive system. Ideal for heavyduty and large bearing applications with wide temperature variations and high volume requirements.

13

Precision-honed Components for Reliable Operation in the Harshest Environments

Technical SpecificationsMaximum operating pressure 3500 psi (241 bar)

Minimum operating pressure 1850 psi (128 bar)

Suggested operating pressure 2500 psi (172 bar)

Reset pressure 600 psi (4.1 bar)

Output volume per cycle 0.008–0.08 in3 (0.13–1.13 c3)

Recommended fluids Uses NLGI #2 grease down to 32˚ F (0 ºC)

Instruction manual 308953

Design Guide 309

Zerk Fitting Outlet 1/8 in npt

Supply Line Outlet 1/4 in npt

Inlet 3/8 in npt

Visual Indicator Pins

Lock Nut

Adjustment Screw

Supply Line Outlet

Zerk Fitting with Cap

Mounting Holes Same as the competion for an easy retrofit

Graco’s captured seal design is the best in the business!

• Test results show the difference – GL-1 injectors showed no seal leakage at 215,000 cycles

• Seals last 5 times longer than the competition’s!

• Combine with GL-11s and GL-32s in the same Single Line Parallel System for a full range of outputs

To adjust:

1. Loosen the lock nut

2. Rotate 5/8 inch output adjustment nut clockwise to decrease grease output–decrease the travel of the piston

3. Rotate 5/8 inch output adjustment nut counter-clockwise to increase grease output–increase the travel piston

GL-1 Injector

14

Adjustable to fit any machine

Visual Indicator PinConvenient front-mounted cycle pin indicator confirms that the injector is functioning properly

Output Adjustment NutAdjustable output volume from 0.001–0.008 in3 (0.02–0.13 cm3) makes it easy to customize each individual lube point

One Piece Cast InjectorOne piece design for added durability

Accurate, reliable and adjustable lubrication for every lube point on your machine

• Longer lasting seal design for trouble-free performance

• Easy to design, setup and operate

• Flexible–add or subtract lube points without redesigning your system

• High performance–handles up to NLGI

#2 grease

GL-32,33,42,43 Grease Injectors

Precision-honed Components for Reliable Operation in the Harshest Environments

GL-32 GL-43 GL-33 GL-42

Maximum operating pressure 3500 psi (241 bar)

1000 psi (69 bar)

3500 psi (241 bar)

1000 psi (69 bar)

Minimum operating pressure 1200 psi (83 bar)

750 psi (52 bar)

1200 psi (83 bar)

750 psi (52 bar)

Typical operating pressure 1500 psi (103 bar)

850 psi (59 bar)

1500 psi (103 bar)

850 psi (59 bar)

Reset pressure 200 psi (13.7 bar)

150 psi (10 bar)

200 psi (13.7 bar)

150 psi (10 bar)

Output volume per cycle 0.001 - 0.008 in3 (0.02 - 0.13 cm3) 0.001 - 0.003 in3 (0.02 - 0.05 cm3)

Maximum temperature rating 350˚ F (176˚ C)

Recommended fluids Grease up to NLGI #2

SAE 10 weight oil minimum

Grease up to NLGI #2

SAE 10 weight oil minimum

ABOUT GRACO

SALES/DISTRIBUTION/

SERVICE

Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle lubrication, commercial and industrial settings.

The company’s success is based on its unwavering commitment to technical excellence, world-class manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco offers systems, products and technology that set the quality standard in a wide range of fluid handling solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication, and dispensing sealants and adhesives, along with power application equipment for the contractor industry. Graco’s ongoing investment in fluid management and control will continue to provide innovative solutions to a diverse global market.

Anoka, MN, US Shanghai, China Suzhou, China

©2015 Graco Inc. 352400 Rev. A 06/2015 Printed in China. All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Contact us today!For more details Email us: [email protected] visit: www.graco.com/lubrication

a complete family of reliable lubrication equipment · a complete family of reliable lubrication...

Documents