› assets › 3--proposal-2019-new-book-… · web viewdisk book is done in ms word – the...

Cindy Renee Carelli – Executive EditorProposal Form 2019

CRC PRESS(A Taylor & Francis Company)

Proposal Submission Form – New BookCompletion of this form does not in itself constitute an agreement to publish.

(Please do not change color of type, font or include any special formatting when completing this form)

If this book is part of a book series, please list the book series:

Advances in Mathematics and Engineering

Series Editor: Mangey Ram __________________________________________________________________

CRC Press is committed to publishing, up-to-date, state of the art, technical /reference engineering publications.

With this in mind, CRC Press is always looking for potential authors who feel they can make a difference to the literature in their areas of expertise. If you have published technical papers, conducted professional seminars,

solved important real-world technical problems, or are currently teaching at a university and have gathered enough research information that could develop into a course textbook, you could be an excellent candidate for

authorship.

Developing a book proposal is easy. Simply answer the following questions as completely as you can:

1


INFORMATION ON PROPOSED BOOK(Please keep in mind when completing this form that I need as much detailed information as possible. I will be your voice once I go before my

Editorial Board and pitch your proposal. If I do not have complete information, that could result in your proposal not being approved for publication).

Tentative book title and subtitle (if any):

Are you preparing a Disk Book or a Camera-Ready Book? (please place a next to the answer below)

Disk Book: ________Disk book is done in MS Word – the Author will double-space the manuscript and unembed the figures from the text and save each figure separately in a separate folder. The publisher will format the pages.

Camera-Ready Book: ________Camera-Ready book is done in Latex – the Author will format their own pages and then incorporate the publisher’s changes after a proofread for final printer-ready pages.

Is this book Authored or Edited? (Please place a next to the answer below) (Authored – no contributors involved / Edited – chapters are written by contributors)

Authored Book: _____ Edited Book: _____

Please include Author/Editor contact information below:Author/Editor

NamePosition/Title/

Affiliation Mailing Address Phone # Email Address

Author/ Editor Name

Position/Title/Affiliation Mailing Address Phone # Email Address

Author/ Editor Name


2


Author/ Editor Name


Please attach a short bio. For each Author or Editor.: (Limit to 50 or 100 words per author)

If this is a contributed book (edited book) please list the number of contributors that will be involved with this book:

SUBJECT MATTER

Although not necessary, if 2 to 3 sample chapters are available, please send them with this form.

Definition of topic: (Please include an example of how this process is used in everyday life)

Please write a short description of your book, which could be modified, for promotional purposes.

Please outline your reasons for proposing a new book in this area:

Please include one or two “everyday examples” of how this is used in our society today.

Please list up to eight major features of your book, which make it unique:(please make sure that the features have to do with the material included in the book and not who is writing the book)

1. –2. –3. –

3


4. –5. –6. –7. –8. –

What is the key benefit for potential buyers?

Please give a one-line handle that describes your book and could be used for promotional purposes:

Please attach proposed table of contents, including section and sub-section headings:Please note that with the direction today’s technology is moving, in regards to e-books, all chapters should begin with a chapter abstract (about 150 words). These abstracts, increasingly required by e-book vendors, although they won’t be published in the book and should not be listed in the table of contents, they will become part of the book’s metadata and will allow users, particularly library patrons, to search your book’s content more thoroughly. Please keep in mind that providing good metadata substantially increases the visibility of your book. All chapter abstracts should be put in a separate folder marked “Abstracts”, when your manuscript is submitted.

Please attach proposed preface:

MANUSCRIPT INFORMATIONReminders: Permissions - It is the responsibility of the author to go after, pay for, and secure permission to reuse any already published material that may be included in their book. Although we strongly encourage authors to use their own original unpublished material, we do understand at times, borrowed material might be needed. So to prevent any delays from the manuscript going into production, it is extremely important that you as the author take care of any permissions if needed, before the manuscript is delivered to us.

Index - The index is to be prepared and submitted by the author. A guide for compiling an index will be provided. To help avoid any unnecessary or possible delays with the production schedule of your book, it is advised that you begin to develop your index as soon as you deliver your completed manuscript. Then once you receive the page proofs, you can then use the page numbers to list in the index you created.

In the event that the author cannot create or supply an index, the publisher will arrange to have the index created and the costs will be charged against the author’s royalties. The cost is estimated to be about $4.00 per printed page, but it could be more.

Please note that the index will need to be submitted to the vendor once corrected proofs have been returned by the author. It is not to be submitted with the manuscript

Approximately how many manuscript (typewritten, double-spaced) pages, would you expect your manuscript to contain?

What date do you expect to deliver your complete and final manuscript to us?

4


What software program(s) are you using: (please see last pages of this form for list of acceptable programs)

1) Figures ___________________2) Text______________________

Please list the estimated number of any special physical features such as: Total number of figures:

(please break the above number down below) Photos: Line drawings: Total number of tables: Total number of equations: Total number of problems: Total number of case studies:

(please break the above number of case studies down to how many will be domestic and how many will be international below) Domestic Case Studies:__________ International Case Studies:_______

Color figures, or any color inside of a book adds extra production cost to the book. We encourage you to go with b/w (black & white) figures/photos. Please confirm that your figures/photos can be done in b/w:

Please know that sending in color figures, thinking that we can easily remove the color, is not always a cost-free function we can do. It can cost us to have to remove color from a figure. It also can harm the quality of the figure.

With that in mind, please make sure all figures are sent in as b/w.

Also, to keep our production costs down, we encourage our authors to create their own Index for the book. An easy step-by-step guide will be sent to you.

What form of measurements do you use in your book? (Please place a next to the answer).

US Customary Units: _______ SI (International Systems Units: _______ Both of the above: _______

What form of English Spelling are you using in your book? (Please place a next to the answer).

US English Spelling:_______ British English Spelling:_______

Describe any electronic materials to accompany your book or derivative products to follow. Include platform, medium, and benefits to your book, and any programming or conversion needed.

5


Please list between 6 to 12 key words that describe your book: (these are words people are most likely to use when doing websearches. Please make sure that you do not repeat any words that are in the title, as those words automatically will be entered into the list.

- - - - - -

If you are doing an edited book (chapters are written by contributors), will you use a plagiarism check software once the contributors send you their chapters, and before you send the manuscript to us? If yes, which program will you use?

THE MARKET

Please identify the readership for your book:

Please breakdown the readership/disciplines into the following areas: Primary Market:

Secondary Market:

Tertiary Market:

Evidence Based: With today’s markets, it needs to be evident that the topic that you are writing about, or your book is being written due to evidence in the marketplace, showing that there is a clear need for this book. Please share that evidence here:

Please list something that is in your book that would be of interest to our UK sales reps. that will help them push your book in the UK markets.

We do various marketing campaigns using various social media outlets. With that in mind, please provide any social media handles that you use/have.

6


Please list any societies, professional organizations, companies or other groups, which might purchase your book in quantity:

Please list any key journals or magazines in this area:

If you know of any CRC Press/Taylor and Francis books that your book would team up well with, please feel free to list those titles below.ISBN: Title Lead Author Pub Date Price How they relate

123 4

Only complete this section if your book is a primary textbook – where the majority (more than half) of the sales will be from the textbook market.

TEXTBOOKS

For what specific course(s) is your book written for? Please list the prerequisite course(s): What courses are typically taken after the course your book is used for? What department(s) is this course taught out of? Is this a core course? Level: Typical student numbers: Length of course: Is the course optional or compulsory? Will a solutions manual be available? Will a instructors manual be available? Are you going to include anything along with your textbook such as PowerPoint

Slides, software, or anything that will enhance textbook adoptions? How many times a year is this course offered? What other universities offer this same course? How many students think take this course a year (including all schools that offer it)? Would your book be for main adoption, supplementary, or recommended reading? What book is currently being used? Do you currently teach this course at your university and do you plan on adopting

this book for course use? Please list why you feel your book would be a better course text and why you think

the instructors will change to your book.

7


COMPETITION

Please answer the question, “Why do we need another book in this field?”

Please list in order of importance, any domestic and international (at least two each) books, which compete directly with or are similar to your book.

Title Author(s) Publisher Pub Date Price Key Differences1 Commonalities:

Differences:2 Commonalities:



Differences:

Please outline in what way your book is better than and differs from the competitors mentioned above.

Reviewing Process:Although we have our own network of academics and practitioners across the disciplines from which we can select appropriate reviewers to comment on your book proposal, it would also be helpful if you could suggest those working in this field who you would expect to provide useful feedback on your work. If you could include that information below, that would be most helpful.

Name & Title Affiliation Address Phone # Fax # Email Address123 45 6 78

OPTIONAL:

SUBJECT LISTING

8

Cindy Renee Carelli – Executive EditorProposal Form 2019Please rank the subject classifications below that are relevant to your book in order of importance. You can use numberings from 1 (most important) onwards in the boxes alongside.

Agricultural SciencesAgriculture & Agronomy Wildlife Science Crop ScienceAgroecology Soil Science Others, please specifyForestry Crop Science

Biomedical ScienceBioinformatics Biomedical Imaging ToxicologyBiomedical Engineering Immunology Medical DevicesBiostatistics Neuroscience Others, please specifyBiotechnology NeuropsychologyEpidemiology Pharmacology

Business & ManagementBusiness Management Government & Education Manufacturing & Industrial

EngineeringFinance & Investing Human Resources &

TrainingOthers, please specify

Business & Management-Quality & Six SigmaQuality & Six Sigma-General

Kanban Library and Information Science

Mistake-Proofing - Poka-Yoke

Problem Solving Customer Relationship Management (CRM)

Productivity Improvement Business Information Systems

Project Management

5S and Visual Controls Enterprise Resource Planning (ERP)

Supply Chain Management / Logistics

Cellular Manufacturing - Just-in-Time

Healthcare Financial Management & Leadership

Enterprise Resource Planning (ERP)

Quick Changeover-SMED Process Improvement Facility ManagementShopfloor Security Management Hospitality & Tourism

ManagementTPM-Automonomous Maintenance

Social Science Others, please specify

Business and Management-Lean Methods & ImplementationLean Methods & Implementation-General

Innovation / Technology / Knowledge/ Information Management

Organizational Behavior / Industrial Organization

Lean Basics – Lean Classics

Leadership – Strategy Value Stream Management

Organizational Culture Metrics & Finance Marketing & ServiceEnterprise Resource Planning (ERP)

Office – Administrative Processes

Economics

Case Studies Product Development Others, please specifyChemistry

Analytical Chemistry Industrial & Applied Chemistry

Materials Chemistry

Biochemistry Inorganic Chemistry Forensic ChemistryCatalysis Liquid Crystals Separation

Science/ChromatographyComputational and Theoretical Chemistry

Organic Chemistry Spectroscopy

Electrochemistry Photochemistry Surface & Colloid Chemistry

Fuels and Petrochemicals Physical Chemistry Others, please specifyGeneral Chemistry Natural Product ChemistryGeochemistry Medicinal Chemistry

9

Cindy Renee Carelli – Executive EditorProposal Form 2019Environmental Chemistry

Chemistry Fate & Transport Chemical Properties Environmental Sampling & Analysis

Chemistry-General Others, please specifyComputer Science & Engineering

Algorithms and Complexity Cryptography & Coding Theory

High Performance Computing

General Computing Data Mining and Knowledge Discovery

Web Design

Computational Biology Discrete Systems Web DevelopmentComputer Engineering Machine Learning and

Pattern RecognitionOthers, please specify

Computer Graphics RoboticsVisualization Theory

Energy & Clean TechnologyBio Energy Novel Technologies Wave EnergyBusiness & Policy Renewable Energy Geothermal EnergyClean Technologies Wind Energy Traditional Industries-Clean

& Green AdvancementsEnvironmental Solar Energy Others, please specify

Chemical EngineeringBioprocessing Mass Transfer &

ThermodynamicsClean & Sustainable Processes

Chemical Processing & Design

Process Control Energy, Fuels & Petrochemicals

Others, please specifyCivil Engineering

Coastal, Waterway & Ocean Engineering

Earthquake Engineering Civil-General

Construction Engineering Estimating & Cost Engineering

Others, please specify

Geotechnical EngineeringGeotechnical Engineering Pavement Engineering Dams & Hydraulic

EngineeringFoundations and Piling Rock Mechanics Others, please specifyGeomechanics Soil MechanicsGeorisk & Hazards Tunneling & Underground

EngineeringStructural Engineering

Structural Engineering Marine and Offshore Structures

Transportation Engineering

Concrete & Cement Civil Engineering History Others, please specifyElectrical Engineering

Circuits & Devices Others, please specify

Electrical CommunicationsCommunications-General Communications System

DesignTelecommunications

Analog Communications Optics, Lasers & Photonics

RF & Microwaves

Networking Communications

Digital & Wireless Communications


Electrical-ElectronicsElectronics-General Intelligent Systems Power EngineeringMicroelectronics Power Electronics Sensors, Instrumentation &

MeasurementElectronic Packaging Electrical-General Signal Processing

10


Industrial Electronics Image Processing Systems & ControlsOthers, please specify

Environmental EngineeringAir Pollution Remediation Life-Cycle AnalysisMeteorology Solid Waste/Recycling Others, please specifyHazardous Waste Environmental - General

Engineering-GeneralSystems Science & Engineering

Engineering Design Packaging

Reference & Collected Works

Engineering Management Others, please specify

Industrial and Manufacturing EngineeringIndustrial & Manufacturing-General

Plant Engineering Textile Manufacturing

Manufacturing & Processing

Production Systems Others, please specify

Operations Research Quality Control & Reliability

Mining EngineeringMining Engineering-General Others, please specify

Mechanical EngineeringCombustion Mechanical-General TribiologyAcoustics Thermodynamics Vibrations & Applied

DynamicsAutomotive Engineering HVAC Others, please specifyAerospace Engineering Machine DesignEnergy Engineering MechanicsFluid Dynamics Nano/Microengineered

Devices and SystemsEnvironmental Science

Environmental Toxicology Environmental Law, Management, and Compliance

Modeling & Systems Analysis

Geology Remote Sensing & Photogrammetry

Ecology

Environmental Science-General

GIS and Mapping Resource Management & Sustainability

Ecological Economics Turfgrass Science & Engineering

Landscape Ecology

Hazardous Materials Environmental & Ecological Risk Assessment

Earth Science

Others, please specifyErgonomics & Human Factors

Cognitive Engineering & Decision Making

Human Computer Interaction

Product Design

Communications Human Performance Modeling

Safety

Ergonomics & Psychology Musculoskeletal Disorders Work DesignOthers, please specify

Food & Culinary ScienceFood Additives & Ingredients

Chemistry Functional Foods & Nutraceuticals

Brewing & Fermentation Quality Assurance MeatsEngineering & Processing Biotechnology DairyLaws & Regulations Fats & Oils SeafoodMicrobiology & Safety Fruit & Vegetable

ProductsCulinary Science

11


Packaging Product Development Culinary ArtsOthers, please specify

Forensics & Criminal JusticeCriminal Justice & Law Forensics Security ManagementArson & Fire Investigation Forensic Pathology Others, please specifyComputer Crime Investigation

Law Enforcement

Games and AnimationAudio & Composition Game Art ProgrammingDesign Game Development &

Production3D Art & Animation

3D Software Drawing Technique & Illustration

Traditional Animation

Others, please specifyGeoscience

General Geology Others, please specifyHealthcare – Allied Health

Radiography Health & Social Care General ManagementNursing Systems & Services Administration & PolicyMidwifery Herbal Medicine Information TechnologyAudiology Fitness Process ImprovementAlternative & Complementary Medicine

Legal Quality & Patient Safety

General Management Public HealthCounselling & Psychotherapy

Financial Management Others, please specify

Homeland SecurityCounterterrorism Disaster Planning &

RecoveryEmergency Response

General Others, please specifyInformation Technology

Certification & Accreditation Database IT ManagementMicroprocessors & Microelectronics

Networking Communication

Operations Management

Programming Languages Security & Auditing Systems and Computer Architecture

Software Engineering & Systems Development

Internet & Web-based Computing

Intelligent Systems

Operating Systems Others, please specifyLife Science

Botany & Plant Science Lab Animal Science Veterinary ScienceCell Biology Marine & Aquatic Science ZoologyDevelopmental Biology Methods &

InstrumentationArchaeology

Entomology Microbiology AnthropologyGenetics Molecular Biology MicroscopyEvolution & Natural History Others, please specify

Materials ScienceGeneral Composite Materials ProcessingProperties & Mechanics Corrosion Metals & AlloysAdhesives Electronic, Magnetic,

Optical MaterialsSurface Engineering

Biomaterials and Regenerative Medicine

Fire Science Chemical & Physical Properties

Ceramics & Glasses Industrial Textiles Others, please specifyCoatings & Thin Films Materials Characterization

& TestingMathematics

12


Algebra Mathematical Modeling Recreational Mathematics & Popular Science

Combinatorics & Discrete Mathematics

Mathematics for Finance Set Theory & Logic

Differential Equations & Nonlinearity

Algebraic Geometry and Number Theory

Mathematics for Engineering

Game Theory Applied Mathematics Mathematics for PhysicsIntroductory Mathematics Numerical Analysis &

Mathematical Computation

Mathematics for Biology & Medicine

Geometry and Topology Real, Complex & Functional Analysis

Operations Research

Probability Theory & Applications

Mathematical & Computational Imaging


Medicine-ClinicalCardiology and Cardiovascular Medicine

Endocrinology & Metabolic Disorders

Hematology

Clinical Pharmacology & Toxicology

Anatomy, Physiology & Biochemistry

History of Medicine

Critical Care Medicine Allergy & Immunology Microbiology & Infectious Diseases

Dentistry Anesthesiology General MedicineDermatology & Cosmetic Science

Gastroenterology & Hepatology

Family Practice

Diabetes Urology Medical GeneticsEmergency Medicine Geriatric Medicine &

GerontologyNeurology

Neonatal-Perinatal Medicine

Pain Management Pediatrics

Nephrology Pulmonary Medicine PathologyOncology and Radiation Therapy

Rheumatology Reproductive Medicine

Occupational & Environmenatal Medicine

Public Health & General Preventive Medicine


Orthopedics & Trauma Radiology & Nuclear Medicine

Obstetrics & Gynecology Sleep DisordersPsychiatry, Psychotherapy & Mental Health

Sports Medicine

Medicine-General ReferenceGeneral Medical Humanities Career, Skills & TrainingEducation Revision Guides Others, please specify

Medicine-SurgeryGeneral Facial Plastic Surgery Orthopedics & TraumaBreast Surgery Neurosurgery Others, please specifyCardiothoracic Surgery Vascular SurgeryGastrointestinal Surgery Oral & Maxillofacial

SurgeryPediatric & Neonatal Surgery

Opthalmology

Plastic Surgery Otorhinolaryngology, Head & Neck Surgery

Nanoscience & TechnologyMesoscale Physics Nanomaterials Others, please specifyNanobiotechnology Nanoscience

/NanotechnologyNutrition

Sports Nutrition Health & Disease Nutrition ScienceOthers, please specify

Occupational Health & Safety13


Safety-General Industrial Hygiene SafetyOthers, please specify

Pharmaceutical Science & RegulationPharmaceutical Science Drug Delivery PharmacyBiotechnology/ Biopharmaceuticals

Drug Discovery Quality Assurance

Bioprocess Technology Drug Development Regulations & StandardsCleaning & Sterilization Laboratory TrainingClinical Trials Management ValidationComputer Software Manufacturing &

EngineeringOthers, please specify

PhysicsApplied & Industrial Physics Computational Physics Mathematical PhysicsApplied Mechanics & Fluid Dynamics

General & Introductory Physics

Medical Physics

Astronomy & Astrophysics Condensed Matter & Materials Science

Nonlinear Physics

Atomic & Molecular Physics Electronic Materials & Devices

Nuclear Physics

Biophysics Energy & Environmental Physics

Particle/High Energy Physics

Chemical Physics Geophysics Lasers, Optics & PhotonicsQuantum Physics Statistical Physics &

ThermodynamicsOthers, please specify

Plasma Physics Sensor Science & Technology

Polymer SciencePolymer Chemistry Materials and Plastics Others, please specify

Public Administration & Public PolicyFundamentals & General Reference

Finance, Budgeting and Procurement

Policy

Leadership & Performance Planning & Development Others, please specifyStatistics

Statistics for Life Sciences Learning & Data Mining Statistics for the Social and Behavioral Sciences

Introductory Statistics Computational Statistics Environmental StatisticsProbability Theory & Applications

Statistics for Business, Finance & Economics

Statistical Genetics & Bioinformatics

SPC/Reliability/Quality Control

Statistics for Engineering and Physical Science


Theory & Methods Biostatistics and Epidemiology

Water Science & EngineeringDrinking Water Hydrogeology Surface WaterGeneral Hydrology Waste WaterGround Water Storm Water Water PollutionWater Resources Management

Wetlands Others, please specify

Veterinary MedicineGeneral Equine ExoticsSmall Animal Farm Animal Anatomy, Ophthalmology &

RadiologySelf-Assessment Reviews Others, please specify

OthersOthers, please specify

14


I’m sure at first glance; this may seem overwhelming to you. But who better knows your book than you?

Just simply start describing your book, using the above questions as a guide, everything else will fall into place. If you get stuck, have any questions what so ever; please feel free to contact me. I will be more than happy to go over

any questions you may have.

Once this form is complete, please email it to:Cindy Renee Carelli

Executive Editor - EngineeringCRC Press – A Taylor and Francis Company

520 Southridge RoadClermont, FL 34711

Telephone: 352-536-9510 Fax: 352-536-1670 Email: [email protected]

Please keep in mind that the review process of a new project can be a lengthy one. If you have not received an initial acknowledgment from me

that I have received your proposal, two weeks from the date you sent it in, please feel free to contact me. I normally keep the author well advised as to

what phase of the evaluation their proposal is in.

Thank you!

15


Schedule AProduction Standards and Software Guidelines for Authors

• Carefully follow the manual, “Taylor & Francis Group: Author’s Guide to Publishing,” for style and typing instructions, e.g., double-spaced manuscript pages.

• When submitting your manuscript, please provide all permission verification forms, permission letters, and contributor agreements.

• Complete front matter should be submitted with your manuscript: preface, biographies, table of contents, and list of contributors. Please be sure all information for project participants is current.

• Please provide your manuscript electronically with a hard copy printed from the submitted disks. You may provide CDs, DVDs, or USB flash drives; you may also upload files to our ftp site (your coordinator will provide a link).

• Following are the acceptable software applications for text, tables, and equations. Please use a software version created within two years of the submission of your manuscript.

Mac PC

Microsoft Word Microsoft Word (only original unformatted data will be used)Excel ExcelMathType MathType (you must use CRC preferences and font list)

LaTEX

• Each CD/DV/USB should be labeled with the author name, book title, chapter numbers, software used (including version number), and the date of creation. Please print the hard copy from these disks at 100%.

• Please do not try to make the manuscript look as if it were the final book. For example, chapter titles and subheads typed in full capitals will have to be retyped by the compositor. It should contain no layout formatting such as styles, borders, shading, etc. There will be charges incurred for retyping your manuscript if your electronic files are not acceptable.

• Please do not embed into the text any art objects (such as figures) from other applications.

• Please adhere to a two-digit numbering system for numbering figures, tables, and equations (chapter number+figure number, e.g., Figure 5.1).

• Your art should be provided in one of the following acceptable formats:1. Original electronic line-art files should be created in Adobe Illustrator or Macromedia Freehand. Original electronic art files containing grayscales or photographs should be created in Adobe PhotoShop (please note that type must not be created in PhotoShop). All art files should be placed in separate folders, clearly labeled, and saved in one of the following formats, listed in the order of acceptability:Adobe Illustrator (.ai) PDF (.pdf) set to the highest level of resolutionEPS (.eps) GIF (.gif)JPEG (.jpg) TIFF (.tif)2. Structures may be created in ChemDraw and should be supplied as .cdx and .eps or .pdf.3. Screen captures are dependent on the resolution of the monitor (which is usually 96 dpi)and are best saved as .jpg or .gif.

Unacceptable art includes scanned printed figures, halftones, printed grayscales, photocopies, faxes, hand-drawn figures, and any printed material.

Art Review Guide Lines

Accepted extensions:.tif / .jpeg / .gif / .bmp / .ai / .eps / .doc / .ppt / .xls / .ps /.pdf

16


Accepted software:Illustrator (.ai or .eps)Freehand (.fh or .eps)Photoshop (.tif, .jpeg, .gif, or .bmp)Microsoft Office: Word (.doc) PowerPoint (.ppt) Excel (.xls)Visio (.vsd) – PDF will get the best results/can be accepted as .vsdCorel Draw (.cdr) should be saved as .aiAutoCAD - should be saved as .dwgLatex (.tex) should be saved as .ps (postscript file) or .pdf (set at the highest resolution possible 2400 DPI)Chemdraw (.cdx)–PDF will get the best results. Place Chemdraw (.cdx) file in Word & PDF on a PC. .cdx files can be accepted but will require extensive work to match the authors original. Hard copy should be provided from the author. Matlab - should be saved as .tif (at the highest resolution possible) and will need to be relabeled

Not Accepted Software/extensions: Microsoft Works (.wks)Word Meta Files (.wmf)Both of the above file type can be embedded in Word (.doc) and will then be acceptable for our use.Canvas (.cnv)Claris Works (.cwk) Sigma Plot (.jnb) - can be saved as Word (.doc)MacDraw ProDesignerHarvard GraphicsCricketSigma Plot.mwc

Please Remember…Screen dumps are dependent on the resolution of the monitor which is usually 96 DPI and are best saved as a .jpeg or .gif Photographs should be saved as .tif Scanned Images larger than 11 x 17 will be shot with a digital camera

17

› assets › 3--proposal-2019-new-book-… · web viewdisk book is done in ms word – the...

Documents