A = Immobilizer / anti‐theft LEDB= Speedometer with twin scale (km/h and mph)C = Fuel reserve warning lightg gD = Fuel gaugeE = Turn indicator warning lightF = High‐beam warning lightG = Emergency turn indicator warning lightH = Warning light for parking brake engaged (where available)I = Front suspension locking system warning light (where available)L = Engine stop warning lightM = Front suspension locking system failure warning light (where available)N = Digital displayO = Low oil pressure warning lightO = Low oil pressure warning lightP = Engine control telltale light and injection system failure warning lightQ = Coolant temperature gauge

Marelli MIU G3 ECU / Throttle Body

Yourban 300Kerb weight 212 kg

16.6 kW at 7,500 rpm24 Nm at 6000 rpm24 Nm at 6000 rpm

Front wheel rim 13" x 3.00"Rear wheel rim 14" x 3.75"

MP3 300 Kerb weight 230 kg

16 5 kW t 7 50016.5 kW at 7,500 rpm23.2 Nm at 6,500 rpm

Front wheel rim 12" x 3.00"Rear wheel rim 14" x 3.75"

SCHEDULED MAINTENANCE TABLEI: CHECK AND CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY.C CLEAN R REPLACE A ADJUST L LUBRICATE

Km x 1,000 1 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80

Safety fasteners I I I I I

C: CLEAN, R: REPLACE, A: ADJUST, L: LUBRICATE* Replace every 2 years

Yourban 300

y

Spark plug I R I R I R I R I R I R I R I R

Centre stand bracket L L L L

Drive belt R R R R R

Throttle control A A A A A A A A A

Air filter C C C C C C C C

Engine oil filter R R R R R R R R R

Valve clearance A A A A

Electrical system and battery I I I I I I I I I

Coolant * I I I I I I I I ICoolant * I I I I I I I I I

Brake fluid * I I I I I I I I I

Engine oil R I R I R I R I R I R I R I R I R

Hub oil R I I I R I I I R I I I R I I I R

Brake pads I I I I I I I I Ip

Sliding shoes / CVT rollers R R R R R R R R

Tyre pressure and wear I I I I I I I I

Vehicle and brake test I I I I I I I I I

Suspension I I I I I I I I

Steering I I I I I I I I I

Roll lock gripper control cable A A A A A A A A A A A A A A A A A

Time 120 15 165 75 135 15 185 15 135 75 165 15 165 15 185 15 165

Yourban 300

Specification Desc./Quantity

VEHICLE TECHNICAL DATA

p /Q y

Chassis Tubular and sheet steel

Front suspension The roll system is composed of an articulated parallelogram suspension with die-cast aluminium control arms and two side headstocks plus shock absorbers with hydraulic locking system.

rear suspension Two double-acting shock absorbers, adjustable to four positions at preloading.

Front brake Ø 240-mm double disc brake with hydraulic control operated by the handlebar right-hand lever.

Rear brake Ø 240-mm disc brake with hydraulic control operated by the handlebar left-hand lever.

Wheel rim type Light alloy wheel rims.

Front wheel rim 13" x 3.00"

Rear wheel rim 14" x 3.75"

Front tyre Without inner tube 110/70 13” 48P

Rear tyre Without inner tube: 140/60-14" 64P

Front tyre pressure 1.7 bar

Rear tyre pressure 2.2 bar (2.6 bar with passenger)

Kerb weight 212 kg (200 kg for version NRL without front suspension block and parking brake locking)

Maximum weight allowed 405 kg

Battery 12 V-12Ah SEALED BATTERY

Yourban 300ENGINE TECHNICAL DATA

Specification Desc./Quantity

Type single-cylinder, four-stroke and four liquid-cooled valves

Engine capacity 278 cm³

Bore x stroke 75 X 63 mm

Compression ratio 11 ± 0.5: 1

i idl d 00 00Engine idle speed 1,700 ± 100 rpm

MAX. torque 24 Nm at 6,000 rpm

Max. power 16.6 kW at 7,500 rpm

Timing system single overhead camshaft, chain-driven, on the left-hand side, three-arm rocking levers set up with threaded set screw

valve clearance intake: 0.10 mm - exhaust: 0.15 mm

Starting system electric starter motor with freewheel

Lubrication with lobe pump (inside the crankcase) chain-driven and double filter: mesh and paper

Fuel system 32mm Marelli MIU G3 Integrated ECU / Throttle Body

Fuel Unleaded petrol (95 RON)

Air filter sponge, impregnated with mixture (50% petrol and 50% oil)

Silencer Absorption-type exhaust muffler with catalytic converter and lambda probe.

Max. speed 125 km/h

Emissions compliance EURO 3

Yourban 300FLUIDS AND CAPACITY

Fluid Specification QuantityFluid Specification Quantity

Engine oil 5W – 40 Full Synthetic to API SL – JASO MA/MA2 1.2 Litres

Transmission oil 80W – 90 Mineral Gear Oil to API GL-4 250 cc

Cooling system fluid Ethylene Glycol Base 2 LitresCooling system fluid Ethylene Glycol Base 2 Litres

Fuel 95 Octane (RON) = Premium Unleaded 95 in Australia 11 Litres ± 0.5