981-0246e ky kyd(7 07) - las motorhomesprinted in u.s.a. 981−0246e (ky spec a−l and kyd spec...
TRANSCRIPT
-
Printed in U.S.A. 981−0246E(KY Spec A−L and KYD Spec A−B)
Parts Catalog
Genset
Replaces 6−99 (Spec A−J)
KYKYD
7/07
Redistribution or publication of this documentby any means, is strictly prohibited.
-
The following symbols are used in Onan manualsto alert users to the potentially dangerous condi-tions relating to maintenance of equipment and re-placement of parts. Please read and observe.
This symbol warns of immedi-ate hazards which will result insevere personal injury or death.
This symbol refers to a hazardor unsafe practice which can re-sult in severe personal injury ordeath.
This symbol refers to a hazardor unsafe practice which can re-sult in severe personal injury orproduct or property damage.
To avoid errors or delay in filling your parts order,always give the MODEL, SPEC NO. and SERIALNO. from the Onan nameplate.
For handy reference, insert your nameplate infor-mation in the spaces below.
MODEL AND SPEC NO.
SERIAL NO.
DIGITAL CONTROL SOFTWARE VERSIONAND DATE (IF APPLICABLE)
Contact with USED ENGINE OILS has been identified by a United States federal agency and some USAstate agencies as causing CANCER or REPRODUCTIVE TOXICITY. When checking or changing engineoils take all necessary precautions not to ingest, breathe the fumes or contact the used oil.
Contact with ASBESTOS has been identified by a United States federal agency and some USA stateagencies as causing CANCER or REPRODUCTIVE TOXICITY. When handling engine gaskets take allnecessary precautions not to ingest, breathe or contact the dust from the gaskets! Use adequate ven-tilation and wear protective gloves, masks and clothing!
Contact with BENZINE and LEAD, found in gasoline, fuel additives and solvents has been identifiedby a United States federal agency and some USA state agencies as causing CANCER or REPRODUC-TIVE TOXICITY. When checking, draining or adding gasoline and fuel additives or using solvents takeall necessary precautions not to ingest, breathe the fumes or contact the liquids. Use adequate ventila-tion and wear protective gloves, masks and protective clothing!
PSP-1
Service and repair of Onan equipment must be performed by trained, experienced personnel only. Im-proper service or repair may result in property damage, severe personal injury or death. Do not use thiscatalog as a guide to servicing your equipment. Read and follow the IMPORTANT SAFETY IN-STRUCTIONS in the Service Manual appropriate for the equipment you are working on.
Redistribution or publication of this documentby any means, is strictly prohibited.
-
1
Introduction
This parts manual applies to the KY Recreational Vehicle Sets as listed in the Generator Set Data Table. Parts are
arranged in groups of related items and each illustrated part is defined by a reference number corresponding to the
same reference number in the parts list. Parts illustrations are typical. Using the model and specification number from
your generator set nameplate, select parts that apply to your set. Right and left sides are determined by facing the
engine end (front) of the set.
Generator Set Data Table
MODEL AND Wiring
SPECIFICATION WATTS VOLTS HERTZ FUEL Diagram
3.3KY−FR/11544F 3300 100 50 LPG Vapor 611−1245−033.3KY−FR/11544G 3300 100 50 LPG Vapor 611−1264−03
3.3KY−FR/26119B−E 3300 230 50 LPG Vapor 611−1226?3.3KY−FR/26119F 3300 230 50 LPG Vapor 611−1245−053.3KY−FR/26119G−H 3300 230 50 LPG Vapor 611−1264−053.3KY−FR/26119J−L 3300 230 50 LPG Vapor 611−1268−05
3.3KY−FR/4858L 3300 230 50 LPG Vapor 611−1268−05
3.3KYD−3272A−B 3300 230 50 LPG Vapor 611−1268−053.3KYD−4859B 3300 230 50 LPG Vapor 611−1268−05
3.6KY−FA/11276A 3600 120 60 LPG Vapor 611−1194
3.6KY−FA/26120B−E 3600 120 60 LPG Vapor 611−12253.6KY−FA/26120F 3600 120 60 LPG Vapor 611−12463.6KY−FA/26120G−H 3600 120 60 LPG Vapor 611−12653.6KY−FA/26120G−H 3600 120 60 LPG Vapor 611−1265
3.6KY−FR/11572G−H 3600 100 50 Gasoline 611−1263−033.6KY−FR/11572J−K 3600 100 50 Gasoline 611−1268−03
3.6KY−FR/33742B−E 3600 220 50 Gasoline 611−1212?3.6KY−FR/33742F−H 3600 230 50 Gasoline 611−1245−053.6KY−FR/33742J−K 3600 230 50 Gasoline 611−1268−053.6KY−FR4856K 3600 230 50 Gasoline 611−1268−05
3.6KYD−3270A−B 3600 120 60 LPG Vapor 611−12673.6KYD−3271A 3600 230 50 Gasoline 611−1268−053.6KYD−4857A 3600 230 50 Gasoline 611−1268−05
Continued on next page. −−>
Redistribution or publication of this documentby any means, is strictly prohibited.
-
2
* − The diagonal line (/) in the model and specification number separates generator set characteristicsfrom the specification number and letter. The specification number denotes customer requested options
or deviations from a standard model. The specification letter advances (A to B, B to C, etc.) with major
manufacturing changes Continued from page 1.
Generator Set Data Table
MODEL AND Wiring
SPECIFICATION WATTS VOLTS HERTZ FUEL Diagram
4.0KY−FA/11320E 4000 120 60 Gasoline 611−12254.0KY−FA/11320F 4000 120 60 Gasoline 611−12464.0KY−FA/11320G−H 4000 120 60 Gasoline 611−12654.0KY−FA/11320J 4000 120 60 Gasoline 611−12674.0KY−FA/11580G−H 4000 120 60 Gasoline 611−12654.0KY−FA/11580J−K 4000 120 60 Gasoline 611−1267
4.0KY−FA/26100A 4000 120 60 Gasoline 611−11944.0KY−FA/26100B−E 4000 120 60 Gasoline 611−12254.0KY−FA/26100F 4000 120 60 Gasoline 611−12464.0KY−FA/26100G−H 4000 120 60 Gasoline 611−12654.0KY−FA/26100J−K 4000 120 60 Gasoline 611−1267
4.0KY−FR/11429E 4000 100 60 Gasoline 611−1268−034.0KY−FR/11429F 4000 100 60 Gasoline 611−1255−034.0KY−FR/11429G−H 4000 100 60 Gasoline 611−1263−034.0KY−FR/11429J−K 4000 100 60 Gasoline 611−1268−03
4.0KY−FR/65697E 4000 100 60 Gasoline 611−1268−044.0KY−FR/65697F 4000 100 60 Gasoline 611−1255−044.0KY−FR/65697G−H 4000 100 60 Gasoline 611−1263−044.0KY−FR/65697J−K 4000 100 60 Gasoline 611−1268−04
4.0KY−FA6747K 4000 120 60 EVAP Gas 611−1267
4.0KYD−3269A 4000 120 60 Gasoline 611−1267
* − The diagonal line (/) in the model and specification number separates generator setcharacteristics from the specification number and letter. The specification number de-
notes customer requested options or deviations from a standard model. The specifica-
tion letter advances (A to B, B to C, etc.) with major manufacturing changes.
Redistribution or publication of this documentby any means, is strictly prohibited.
-
Index
3
Adapter, Carb, 19, 21
Adapter, Carb , 27
Adapter, Exhaust (KY), 38
Adapter, Gasoline Air Cleaner (KY Spec A−H), 17Adapter, LP Air Cleaner (KY Spec A−D), 23Adapter, LP Air Cleaner (KY Spec E−K and KYD), 25Adapter, Resonator (KY Spec A), 41
Arm, Rocker, 8
Armature, Starter (KY Begin Spec K and KYD), 31
Armature, Starter (KY Spec A−J), 30Assy Cylinder, Air Wrap, 27
Assy, Carburetor, 21
Assy, Cylinder Air Wrap, 19, 21
Backplate, Exhaust (KY), 38
Barrier, Exhaust (KY Begin Spec B), 43
Base, Enclosure (KY Begin Spec B), 43
Base, Enclosure (KY Spec A), 41
Base, Enclosure (KYD), 44, 45
Base, KY Underfloor, 53
Base, Oil (KY Begin Spec B and KYD), 34
Base, Oil (KY Spec A), 33
Bearing, Balancer Shaft, 11
Bearing, Block End, 9
Bearing, Camshaft, 10
Bearing, Flange, 19, 21
Bearing, Flange (KY Spec A−H), 17Bearing, Gearcase End, 9
Bearing, Rotor (KY Begin Spec B and KYD), 57
Bearing, Rotor (KY Spec A), 55
Bezel, On/Off Switch Mounting (KY Spec A), 55
Block Assy, Brush, 29
Block Assy, Brush (KY Spec A), 28
Block, Brush, 29
Block, Brush (KY Spec A), 28
Board, PC (KY Begin Spec B), 43
Board, PC (KY Spec A), 41
Boot, Generator Harness Insulating (KY Begin Spec J andKYD), 63
Boot, Generator Harness Insulating (KY Spec B−F), 61Boot, Generator Harness Insulating (KY Spec G−H), 62Boot, Spark Plug, 29
Boot, Spark Plug (KY Spec A), 55
Boot, Spark Plug (KY Spec B−H), 58Brace, KY Underfloor Mounting Back , 52
Bracket, Control (KY Spec A), 41
Bracket, Control (KY Spec B−H), 43Bracket, Fuel, 21
Bracket, Fuel Regulator (KY Begin Spec L and KYD BeginSpec B), 27
Bracket, Inlet Insulation (KY Begin Spec B), 49
Bracket, Muffler (KY Spec A), 35
Bracket, Regulator (KY Spec A−D), 23Bracket, Regulator (KY Spec E−K and KYD), 25Bracket, Solenoid (KY Spec A−D), 23Bracket, Solenoid (KY Spec E−K and KYD), 25Bracket, Transformer (KY Begin Spec B and KYD), 57
Breaker, Circuit (KY Begin Spec J and KYD), 59
Breaker, Circuit (KY Spec A), 55
Breaker, Circuit (KY Spec B−H), 58Brush, Generator, 29
Brush, Generator (KY Spec A), 28
Bushing, Enclosure Base (KY Begin Spec F), 43
Bushing, Fuel Tank Reducer, 40
Cable, Starter, 29
Cable, Starter (KY Spec A), 55
Camshaft, 10
Cap, Choke Dome (KY Spec A−H), 17Cap, Dome, 19, 21
Cap, Starter Drive (KY Begin Spec K and KYD), 31
Cap, Starter Drive (KY Spec A−J), 30Cap, Starter End (KY Begin Spec K and KYD), 31
Cap, Starter End (KY Spec A−J), 30Carburetor (KY Spec A−H), 17Carburetor Gasoline (KY Spec A−H), 17Carburetor LP (KY Begin Spec L and KYD Begin Spec B),27
Carburetor LP (KY Spec A−D), 23Carburetor LP (KY Spec E−K and KYD), 25Carburetor, (KY Begin Spec J and KYD), 18, 20
Carburetor, LP (KY Spec A−D), 23Carburetor, LP (KY Spec E−K and KYD), 25Charger, Battery (KY Begin Spec B), 49
Clip, Governor Retainer, 13
Clip, Piston Pin, 9
Clutch, Starter (KY Spec A−J), 30Coil, Ignition (KY Begin Spec J and KYD), 29
Coil, Ignition (KY Spec A), 55
Coil, Ignition (KY Spec B−H), 58Components, Starter (KY Begin Spec K and KYD), 31
Components, Starter (KY Spec A−J), 30Conduit (KY Begin Spec B), 43
Connector, Fuel Tank Barbed Hose, 40
Connector, Fuel Valve Female (KY Spec A−D), 23Connector, Fuel Valve Female (KY Spec E−K and KYD), 25Connector, LP Regulator Hose (KY Spec A−D), 23Connector, Straight (KY Begin Spec B), 43
Control (KY Spec A), 55
Control (KY Spec B−H), 58Coupling, Fuel Tank, 40
Coupling, Fuel Valve Anchor (KY Spec A−D), 23Coupling, Fuel Valve Anchor (KY Spec E−K and KYD), 25Cover Assy, Enclosure (KY Begin Spec B), 49
Cover Assy, Enclosure (Spec A), 47
Cover, Air Cleaner (KY Begin Spec B and KYD), 32
Cover, Air Cleaner (KY Spec A), 28
Cover, Air Cylinder, 15
Cover, Air Filter Thermostat (KY Spec A), 28
Cover, Choke, 19, 21
Cover, Choke (KY Spec A−H), 17Cover, Choke Element, 19, 21
Cover, Choke Element (KY Spec A−H), 17Cover, Crankcase, 11
Cover, Cylinder Air, 19, 21, 27
Redistribution or publication of this documentby any means, is strictly prohibited.
-
Index
4
Cover, Drain (KY Begin Spec B), 43
Cover, KY Housing Panel, 53
Cover, Resonator (KY Begin Spec B and KYD), 32
Cover, Starter Spring (KY Spec A−J), 30Cover, Valve, 8
Crankshaft, 9
Cylinder, Air, 15
Dipper, Oil, 9
Edging, Base Pan (KY Begin Spec B), 43
Edging, Base Pan (KY Spec A), 41
Elbow, Enclosure Base Conduit (KY Spec A), 41
Elbow, Exhaust (KY Spec A), 41
Elbow, Exhaust (KY), 38
Elbow, Intake, 19, 21, 27
Elbow, Oil Base Male (KY Begin Spec B and KYD), 34
Element, Air Cleaner (KY Begin Spec B and KYD), 32
Element, Air Cleaner (KY Spec A), 28
Element, Choke Thermostat (KY Spec A−H), 17Element, Thermostat, 19, 21
Element, Thermostat (KY Begin Spec B and KYD), 32
Element, Thermostat Preheat (KY Spec A), 28
Enclosure, Generator (KY Begin Spec B and KYD), 49
Enclosure, Generator (KY Spec A), 47
Endbell, 29
Endbell (KY Spec A), 28
Endbell (KY Spec B and KYD), 29
Exhaust (KY Begin Spec B), 36
Exhaust (KY Spec A), 35
Exhaust (KYD), 37
Filter, Fuel, 19
Filter, Fuel (KY Spec A−H), 17Fitting, Fuel Valve Barbed Hose (KY Spec A−D), 23Fitting, Fuel Valve Barbed Hose (KY Spec E−K and KYDSpec A), 23
Fitting, Fuel Valve Barbed Hose (KY Spec E−K and KYD),25
Flyweight, 10
Fuse, Generator Harness (KY Spec A), 60
Fuse, Generator Harness (KY Spec B−F), 61Fuse, Generator Harness (KY Spec G−H), 62
Gasket, Air Cleaner, 19, 21, 27
Gasket, Carb Flange, 17
Gasket, Carburetor (KY Spec A−H), 17Gasket, Carburetor Flange, 19, 21
Gasket, Carburetor Flange (KY Spec A−H), 17Gasket, Crankcase, 11
Gasket, Cylinder Head, 8
Gasket, Exhaust (KY Begin Spec B), 36
Gasket, Exhaust (KY Spec A), 35
Gasket, Exhaust Manifold (KYD), 37
Gasket, Exhaust Muffler (KYD), 37
Gasket, Gasoline Air Cleaner Adapter (KY Spec A−H), 17Gasket, Gasoline Intake Manifold (KY Spec A−H), 17Gasket, Gasoline Manifold Insulator (KY Spec A−H), 17
Gasket, Insulator, 19, 21
Gasket, Intake Elbow, 19, 21, 27
Gasket, LP Air Cleaner Adapter (KY Spec A−D), 23Gasket, LP Air Cleaner Adapter (KY Spec E−K and KYD),25
Gasket, LP Carburetor (KY Spec A−D), 23Gasket, LP Carburetor (KY Spec E−K and KYD), 25Gasket, LP Carburetor Flange (KY Spec A−D), 23Gasket, LP Carburetor Flange (KY Spec E−K and KYD), 25Gasket, LP Intake Manifold (KY Spec A−D), 23Gasket, LP Intake Manifold (KY Spec E−K and KYD), 25Gasket, LP Manifold Insulator (KY Spec A−D), 23Gasket, LP Manifold Insulator (KY Spec E−K and KYD), 25Gasket, Oil Base (KY Begin Spec B and KYD), 34
Gasket, Oil Base (KY Spec A), 33
Gasket, Resonator (KY Spec A), 41
Gasket, Service Panel (KY Begin Spec B), 49
Gasket, Valve Cover, 8
Gear, Balancer, 9
Gear, Camshaft, 10
Gear, Crankshaft, 9
Gear, Governor, 10
Gear, Starter (KY Spec A−J), 30Generator (KY Begin Spec B and KYD), 57
Generator (KY Spec A), 55
Gov, Instl Lever, 19, 21
Governor, 13
Governor, Install Lever, 27
Grommet, Enclosure Base (KY Begin Spec B), 43
Grommet, Enclosure Base (KY Spec A), 41
Grommet, Enclosure Base (KYD), 45
Grommet, Enclosure Cover (KY Begin Spec B), 49
Grommet, Enclosure Cover (Spec A), 47
Grommet, KY Housing Rubber, 53
Grommet, Underfloor Mounting Remote (KY), 50
Guide, Push Rod, 8
Hanger, Exhaust (KY), 38
Harness Location, Adapter, 64
Harness Location, Customer Interface Pigtail, 64
Harness Location, Extension, 64
Harness Location, Generator, 64
Harness Location, Remote Panel, 64
Harness, AC Output (KY Begin Spec J and KYD), 59
Harness, AC Output (KY Spec B−H), 58Harness, Adapter (KY Spec F−H and KYD), 66Harness, Adapter (Spec F−H), 66Harness, Customer Interface Pigtail (Spec F−H), 66Harness, Customer Interface Pigtail (KY Spec B−E), 65Harness, Customer Interface Pigtail (Spec B−E), 65Harness, Engine (KY Begin Spec J and KYD), 63
Harness, Extension (KY Spec B−E), 65Harness, Extension (KY Spec F−H and KYD), 66Harness, Generator (KY Spec A), 60
Harness, Generator (KY Spec B−F), 61Harness, Generator (KY Spec G−H), 62Harness, Generator Harness Splitter (KY Spec B−F), 61
Redistribution or publication of this documentby any means, is strictly prohibited.
-
Index
5
Harness, Generator Harness Splitter (KY Spec G−H), 62Harness, Remote Panel (Switch Only), 69, 70
Harness, Remote Panel (Switch Only) (KY Begin Spec Fand KYD), 68
Harness, Remote Panel Adapter (KY Spec F−H and KYD),67
Head, Cylinder, 8
Holder Assy, Brush (KY Begin Spec K and KYD), 31
Holder, Governor Spring, 13
Hose, Air Cleaner Preheat (KY Spec J and KYD), 29
Hose, Choke Preheat (KY Begin Spec B), 36
Hose, Choke Preheat (KY Spec A), 35
Hose, Fuel Tank, 40
Hose, Gasoline Fuel (KY Spec A−H), 17Hose, LP Fuel (KY Spec A−D), 23Hose, LP Fuel (KY Spec E−K and KYD), 25Hose, Preheat (KYD), 37
Housing , Choke, 19, 21
Housing, Air (KY Begin Spec B and KYD), 32
Housing, Choke (KY Spec A−H), 17Housing, Scroll (KY Spec A), 55
Housing, Stator (KY Begin Spec B and KYD), 57
Housing, Stator (KY Spec A), 55
Indicator, Oil (KY Begin Spec B and KYD), 34
Indicator, Oil (KY Spec A), 33
Insulation, Cover (KY Begin Spec B and KYD), 49
Insulation, Door (KY Begin Spec B), 49
Insulation, Exhaust (KY Spec A), 41
Insulation, Exhaust Baffle (Spec A), 47
Insulation, Exhaust Barrier (KY Begin Spec B), 43
Insulation, Inlet (KY Spec B−H), 49Insulation, Inlet (Spec A), 47
Insulation, Inlet Baffle (KY Begin Spec B and KYD), 32
Insulator, Carb, 19, 21
Insulator, Carburetor (KY Spec A−H), 17Insulator, Exhaust (KY), 38
Insulator, Gasoline Intake Manifold (KY Spec A−H), 17Insulator, Head, 19, 21
Insulator, LP Carburetor (KY Spec A−D), 23Insulator, LP Carburetor (KY Spec E−K and KYD), 25Insulator, LP Intake Manifold (KY Spec A−D), 23Insulator, LP Intake Manifold (KY Spec E−K and KYD), 25Isolator, Engine Mount (KY Begin Spec B), 43
Isolator, Generator Mount (KY Begin Spec B), 43
Isolator, Generator/Engine Mount (KY Spec A), 41
Isolator, Mount (KYD), 45
Isolator, Muffler (KY Begin Spec B), 36
Isolator, Snubber (KY Begin Spec B), 43
Isolator, Snubber (KY Spec A), 41
Isolator, Snubber (KYD), 45
Key, Camshaft, 10
Key, Crankshaft, 9
Key, Fan Hub (KY Begin Spec B and KYD), 57
Key, Fan Hub (KY Spec A), 55
Kit, Air Filter (KY Begin Spec B and KYD), 32
Kit, Carburetor, 19, 21
Kit, Carburetor Repair (KY Spec A−C), 17Kit, Carburetor Repair (KY Spec A−J), 17Kit, Carburetor Solenoid Repair (KY Spec B−C)), 17Kit, Enclosure Cover, 49
Kit, Exhaust Elbow, 71
Kit, Exhaust Elbow Adapter (KY), 38
Kit, Exhaust Tailpipe (KY), 38
Kit, Exhaust Tube (KY), 38
Kit, Fuel Tank, 40
Kit, Fuel Tank (Obsolete), 40
Kit, Governor Sleeve, 10
Kit, KY Housing, 53
Kit, KY Underfloor Base, 53
Kit, KY Underfloor Housing, 53
Kit, Mounting (Underfloor), 51
Kit, Muffler, 37
Kit, Remote Adapter, 71
Kit, Remote Panel (Switch and Hourmeter), 69
Kit, Remote Panel (Switch and Voltmeter), 70
Kit, Remote Panel (Switch and Voltmeter) (KY Begin Spec Fand KYD), 70
Kit, Remote Panel (Switch Only), 68
Kit, Remote, Panel (Switch Only), 68
Kit, Set Mounting, 71
Kit, Starter Drive (KY Begin Spec K and KYD Begin), 31
Kit, Starter Drive (KY Spec A−J), 30Kit, Tailpipe Hanger, 71
Kit, Underfloor Mounting (KY Begin Spec B)), 50
Kit, Underfloor Mounting (KY), 50
Kit, Underfloor Mounting (KYD), 51
Kits (Misc), 71
Kits, KY Exhaust, 38
KY and KYD Labels, 72
Label, Air Cleaner (KY Begin Spec B and KYD), 32
Label, Charger (KY Begin Spec B), 49
Latch Assy, Service Panel (KY Begin Spec B), 49
Latch, Service Panel (Spec A), 47
Lever, Governor, 13
Lever, Governor Control, 13
Line, LP Fuel Inlet (KY Spec A−D), 23Line, LP Fuel Inlet (KY Spec E−K and KYD), 25Linkage, Choke, 19, 21
Linkage, Choke (KY Spec A−H), 17Locations, Harness, 64
Lock, Valve Spring, 8
Magneto (KY Begin Spec B and KYD), 29
Magneto (KY Spec A), 28
Manifold, Exhaust (KY Begin Spec B), 36
Manifold, Gasoline Intake (KY Spec A−H), 17Manifold, LP Intake (KY Spec A−D), 23Manifold, LP Intake (KY Spec E−K and KYD), 25Meter, Hour (Begin Spec F), 69
Meter, Volt (Begin Spec F), 70
Mixer, 27
Mount, Generator, 51
Redistribution or publication of this documentby any means, is strictly prohibited.
-
Index
6
Muffler (KY Begin Spec B), 36
Muffler (KY Spec A), 35
Muffler (KYD), 37
Nipple, Fuel Valve (KY Spec A−D), 23Nipple, Fuel Valve (KY Spec E−K and KYD), 25
O’Ring, Oil Fill Tube (KY Spec A), 33
O’Ring, Oil Indicator (KY Begin Spec B and KYD), 34
O’Ring, Oil Indicator (KY Spec A), 33
O’Ring, Rotor (KY Begin Spec B and KYD), 57
O’Ring, Rotor (KY Spec A), 55
Paint, 71
Paint, Enamel Green, 71
Panel, Control (KY Begin Spec J and KYD), 59
Panel, Control (KY Spec A), 55
Panel, Control (KY Spec B−H), 58Panel, KY Housing, 53
Panel, Remote, 68, 69
Panel, Remote (KY Begin Spec F and KYD), 70
Panel, Remote Switch and Hourmeter, 69
Panel, Remote Switch and Voltmeter (KY Begin Spec F andKYD), 70
Panel, Remote Switch only, 68
Panel, Service (KY Begin Spec B), 49
Panel, Service (Spec A), 47
Panel, Under Floor (KYD), 51
Panel, Underfloor Mounting (KY), 50
Pawl, Latch, 47
PCB, Control (KYD), 45
Pin, Cylinder Head Hollow Dowel, 8
Pin, Decompression, 10
Pin, Endbell Roll (KY Spec A), 28
Pin, Parallel, 11
Pin, Piston, 9
Pin, Starter Spiral Roll (KY Spec A−J), 30Pipe, Exhaust (KYD), 37
Piston, 9
Pivot, Speed Adjusting, 13
Plate, Oil Level, 11
Plate, Oil Shield, 9
Plug, Drain (KY Begin Spec B and KYD), 34
Plug, Drain (KY Spec A), 33
Plug, Hole (KY Spec A), 55
Plug, Hole (KY Spec B−H), 58Plug, Spark, 8
Potentiometer (KY Begin Spec J and KYD), 59
Potentiometer (KY Spec A), 55
Potentiometer (KY Spec B−H), 58Pump, Fuel (Electric), 19
Pump, Fuel (KY Spec A−H), 17
Rail, KY Underfloor Mounting Bottom, 52
Rail, Mounting (KYD), 51
Rail, Underfloor Mounting (KY), 50
Rectifier, Generator Harness Bridge (KY Spec A), 60
Regulator, Fuel, 27
Regulator, LP (KY Spec A−D), 23Regulator, LP (KY Spec E−K and KYD), 25Regulator, Voltage (KY Spec A), 28
Regulator, Voltage (KY Spec B−H), 43Relay, Start Solenoid (KY Spec A), 41
Relay, Start Solenoid (KY Spec B−H), 43Relay, Start Solenoid (KYD), 45
Resistor, Generator Harness (KY Spec A), 60
Resistor, Generator Harness (KY Spec B−F), 61Resistor, Generator Harness (KY Spec G−H), 62Resonator, Exhaust (KY), 38
Resonator, Intake (KY Begin Spec B and KYD), 32
Retainer, Starter Clutch (KY Spec A−J), 30Retainer, Starter Ring (KY Begin Spec K and KYD), 31
Retainer, Starter Spring (KY Spec A−J), 30Retainer, Valve Spring, 8
Ring Set, Piston, 9
Ring, Collector (KY Begin Spec B and KYD), 57
Ring, Collector (KY Spec A), 55
Rings, Valve Guide, 8
Rod, Air Inlet (KY Spec A), 28
Rod, Connecting, 9
Rod, Governor, 19, 21
Rod, Governor, 13
Rod, Push, 8
Rotor Assy, Generator (KY Begin Spec B and KYD), 57
Rotor Assy, Generator (KY Spec A), 55
Seal, Air (KY Begin Spec B and KYD), 32
Seal, Air Cleaner Spacer, 19, 21, 27
Seal, Air cleaner Spacer (KY Spec E−K and KYD), 25Seal, Air Filter Foam (KY Begin Spec B and KYD), 32
Seal, Barrier Edge (KY Begin Spec B), 43
Seal, Crankshaft Oil, 9
Seal, Cylinder Block Oil, 13
Seal, Endbell (KY Spec A), 28
Seal, Valve Stem, 8
Shaft, Balancer, 11
Shaft, Flyweight, 10
Shaft, Governor Lever, 13
Shield, Carburetor (KY Begin Spec J and KYD), 59
Shield, Carburetor (KY Spec A), 55
Shield, Carburetor (KY Spec B−H), 58Shield, Control (KY Spec A), 55
Shield, Exhaust Insulation (KYD), 45
Shield, Heat (KY Spec A), 41
Shim, Balancer, 11
Shim, Breather Valve, 8
Shim, Camshaft, 10
Shim, Crankshaft, 9
Sleeve, Governor, 10
Solenoid, Gasoline Fuel Cut (KY Begin Spec B−C), 17Solenoid, Start (KY Begin Spec B), 43
Spacer, Muffler (Isolator KYD), 37
Spline, Starter, 30
Spring, Decompression, 10
Spring, Generator Brush, 29
Redistribution or publication of this documentby any means, is strictly prohibited.
-
Index
7
Spring, Generator Brush (KY Spec A), 28
Spring, Governor Rod, 19, 21
Spring, Governor, 13, 19, 21
Spring, Governor Adjusting Screw, 13
Spring, Governor Rod, 13
Spring, Starter Pinion (KY Spec A−J), 30Spring, Valve, 8, 21
Starter, 29
Starter (KY Spec A), 55
Stator, Generator (KY Begin Spec B and KYD), 57
Stator, Generator (KY Spec A), 55
Stiffener, Bracket (KY Spec A−D), 23Stiffener, Bracket (KY Spec E−K and KYD), 25Strap, Bond (KY Begin Spec B and KYD), 32
Strap, Bond (KY Spec A), 28
Stud, Exhaust (KY Begin Spec B), 36
Stud, Exhaust (KY Spec A), 35
Stud, Exhaust (KYD), 37
Switch, Oil Level (KY Spec A), 33
Switch, Oil Level (KY Spec B−F ), 34Switch, Remote Panel Start/Stop (KY Begin Spec F andKYD), 68
Switch, Remote Panel Start/Stop Switch and Hourmeter(Begin Spec F), 69
Switch, Remote Panel Start/Stop Switch and Voltmeter (KYBegin Spec F and KYD), 70
Switch, Start/Stop (Generator Harness) (KY Spec A), 60
Switch, Start/Stop (KY Begin Spec J and KYD), 59
Switch, Start/Stop (KY Spec B−H), 58
Tank, Fuel, 40
Tappet, 10
Terminal, Spark Plug, 29
Terminal, Spark Plug (KY Spec B−H), 58Transformer, Voltage (KY Begin Spec B and KYD), 57
Transformer, Voltage (KY Begin Spec J and KYD), 59
Tube, Breather, 8, 19, 21, 27
Tube, Exhaust (KY), 38
Tube, Oil Fill (KY Spec A), 33
Tube, Spacer (KY Begin Spec B), 43
Valve Assy, Fuel (KY Spec A−D), 23Valve Assy, Fuel (KY Spec E−K and KYD), 25Valve, Breather, 8
Valve, Fuel Tank Shutoff, 40
Valve, Intake/Exhaust, 8
Wheel Assy, Blower (KY Begin Spec B and KYD), 57
Wheel Assy, Blower (KY Spec A), 55
Wrapper, Air Cylinder, 15
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD8
Cylinder Head
2
3
46
5
12
13 15
16
9
8
7
17
11
10
1
5
9
8
7
18
19
20
2122
22
23
24
25
27
28
14
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
100−3486−01 1 Engine1 Valve
110−3887 1 Intake110−3888 1 Exhaust
2 110−3893 1 Gasket, Cylinder Head3 110−3890 1 Head, Cylinder (Includes
Guides, Seats and ValveGuide Rings)
110−3580 2 Rings, Valve Guide4 Plug, Spark
167−0275 1 60Hz167−0305 1 50Hz
5 740−1008 2 Washer, Flat (M10)6 110−3750 2 Bolt, Cylinder Head
(M10 x 1.25 x 66mm)7 110−3698 2 Washer, Valve Spring8 110−3701 2 Spring, Valve9 110−3700 2 Retainer, Valve Spring
10 110−3914 2 Lock, Valve Spring11 509−0289 1 Seal, Valve Stem12 110−3750−03 2 Bolt, Flange
(M10 x 1.5 x 115mm)
13 123−1920 1 Valve, Breather14 Shim, Breather Valve
110−3922−01 1 .010110−3922−02 1 .020
15 110−3751−00 1 Bolt, Cylinder Head(M8 x 1.25 x 85mm)
16 110−3751−01 1 Bolt, Cylinder Head(M8 x 1.25 x 48mm)
17 110−3892 2 Pin, Hollow Dowel18 110−3743 1 Cover, Valve19 110−3861 1 Gasket, Valve Cover20 800−3026 7 Screw, Hex Flange Head
(M6 x 1 x 25mm)21 123−1917 1 Tube, Breather22 503−1851 2 Clamp, Hose23 115−0465 2 Arm, Rocker24 185−7144 2 Nut, Rocker Arm Adjusting25 115−0496 2 Nut, Lock Adjusting26 115−0471 2 Rod, Push27 115−0472 1 Guide, Push Rod28 115−0497 2 Stud, Rocker Arm
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD9
Crankshaft
1
2
3
4
11
10
76
9 8
12
5
13
1415
16
4
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 Piston (Includes Pin & Clip)112−0291 1 Standard 185−6828 1 0.25 Oversize185−6826 1 0.50 Oversize
2 Ring Set, Piston113−0353 1 Standard185−6829 1 0.25 Oversize185−6827 1 0.50 Oversize
3 112−0290 1 Pin, Piston4 112−0255 2 Clip, Piston Pin5 510−0160 1 Bearing, Block End6 104−1901 1 Gear, Crankshaft7 104−1899 1 Gear, Balancer8 104−1780 1 Crankshaft9 515−0293 1 Key, Woodruff
10 510−0161 1 Bearing, Gearcase End11 509−0258 1 Seal, Oil
12 Shim (Use As Required)104−1721−01 3 0.20mm104−1721−02 3 0.30mm104−1721−03 3 0.40mm104−1721−05 3 0.50mm104−1721−07 3 0.60mm104−1721−08 3 0.70mm
13 Rod Assy, Connecting(Includes Bolt)
114−0373 1 Standard No Replacement 1 0.25 Undersize No Replacement 1 0.50 Undersize14 114−0367 2 Bolt, Connecting Rod15 120−1264 1 Plate, Oil Shield16 114−0366 1 Dipper, Oil
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD10
Camshaft
1
2
4
6
7
8
910
11
12
13
1415
16
17
6
8
11
39
&
5
4
9
&5
18
19
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 115−0463 2 Tappet2 105−0682 1 Camshaft Assy (Spec A−D)
(Includes Parts Marked +)3 105−0724 1 Camshaft (Begin Spec E)
(Includes Parts Marked °)4 105−0681 1 +Gear Assy, Camshaft
(Spec A−D) (IncludesFlyweight, Flyweight Shaftand Pin)
5 105−0731 1 °Gear, Camshaft (Begin Spec E)6 150−2464 1 Flyweight7 150−2302 1 Shaft, Flyweight8 150−2305 1 Pin, Decompression Spring9 515−0305 1 °+Key, Woodruff
10 150−2465 1 +Pin, Decompression11 150−2466 1 +Spring, Decompression12 150−2604 1 Gear, Governor13 526−2077 1 *Washer, Flat14 526−2078 1 *Washer, Flat
15 541−0508 1 Sleeve Kit, Governor (IncludesWashers Marked *, GovernorStop, Governor Sleeve andGovernor Shaft)
16 510−0163 1 Bearing, Ball17 Shim (Use As Required)
104−1896−01 3 .50mm104−1896−02 3 .60mm104−1896−03 3 .70mm104−1896−04 3 .80mm104−1896−05 3 .90mm104−1896−06 3 1.00mm104−1896−07 3 1.20mm
18 115−0471 2 Rod, Push19 510−0161 1 Seal, Oil
+ − Parts Included in Camshaft Assy (Spec A−D)° − Parts Included in Camshaft Assy (Begin Spec E)* − Washers Included in Governor Sleeve Kit.
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD11
Crankcase Cover
89
7
1
2
3
65
4
10
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 101−0787 1 Cover, Crankcase2 815−0781 9 Bolt, Crankcase Cover
(M8 x 1.25 x 30mm)3 101−0788 1 Gasket, Crankcase4 102−1421 2 Screw, Hex Head Cap
(Spec A−F)5 102−1419 1 Plate, Oil Level
(Spec A−F)6 775−0074 2 Pin, Parallel7 104−1792 1 Shaft, Balancer (Includes Shaft
and Gear)
8 510−0163 1 Bearing, Ball9 Shim, Balancer (Use as
Required)104−1896−01 3 0.50mm104−1896−02 3 0.60mm104−1896−03 3 0.70mm104−1896−04 3 0.80mm104−1896−05 3 0.90mm104−1896−06 3 1.00mm104−1896−07 3 1.20mm
10 510−0161 1 Seal, Oil
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD12 Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD13
Governor
1
10
20
11
1213
14
15
16
17
18
19
2
3
4
5 67
8
9
8
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 150−2393 1 Lever, Governor2 150−2396 1 Holder, Governor Spring3 870−0465 1 Nut, Square (M8 x 1.25mm)4 526−0122 1 Washer, Flat (5/16”)5 718−1039 1 Screw, Hex Head Cap
(M8 x 1.25 x 35mm)6 518−0617 1 Clip, Retainer7 740−1002 1 Washer, Flat (M5)8 150−2394 2 Spring, Adjusting Screw9 150−2395 1 Screw, Special
10 150−2391 1 Spring, Governor Rod
11 150−2392 1 Rod, Governor12 518−0576 2 Clip, Retainer13 150−2401 1 Shaft, Governor Lever14 150−2448 1 Seal, Oil15 150−2390 1 Spring, Governor16 870−2159 1 Nut, Flanged (M8 x 1.25)17 150−2398 1 Pivot, Speed Adjusting18 150−2549−02 1 Lever, Governor Control19 150−2514 1 Screw, Governor Adjust20 520−2215 1 Stud, Control Lever Mounting
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD14
“Blank Page”
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD15
Air Cylinder
1
3
2
2
REF PART QTY PARTNO. NO. USED DESCRIPTION
1 134−4919−01 1 Cover, Air Cylinder2 Screw, Torx Pan Head
Thread Forming (M6 x 1 x 12mm)823−0003−06 5 Gasoline823−0003−06 2 LP
3 134−5119 1 Wrapper, Air Cylinder
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD16
CarburetorGasoline (KY Spec A−H)
3
4
5
67
22
21
17
18
19
28
26
30
31
27
25
24
23
32
26
20
8
9
1011
1213
14
1516
1
2
29
33
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD17
CarburetorGasoline (KY Spec A−H)
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 146−0530 1 Insulator2 154−2821 2 Gasket, Intake Manifold3 154−2815 1 Manifold, Intake4 146−0531 1 �Gasket, Manifold Insulator5 146−0532 1 +Insulator6 146−0533 1 �Gasket, Carburetor7 ◊Carburetor
146−0759 1 Spec A146−0743 1 Spec B−C Obsolete146−0742 1 Spec D−H, Spec J thru S/N
F1205998 153−0639 1 Linkage, Choke9 232−3720 1 Bearing, Flange
10 153−0638−01 1 Housing, Choke11 153−0659 1 Cover, Choke Element12 517−0305 1 Cap, Dome13 153−0640 1 Element, Choke Thermostat14 Cover, Choke
153−0637−01 1 Spec A153−0651−02 1 Spec B−H
15 526−0003 1 Washer, Flat (3/16”)16 860−2005 1 Nut, Hex (M4 x .7mm)17 Adapter, Air Cleaner
145−0687−02 1 Spec B, C145−0705−02 1 ~ Spec D−H
18 740−1004 2 Washer, Flat (M6)19 800−2046 2 Screw, Hex Head Cap
(M6 x 1 x 80mm)20 Gasket, Carburetor Flange
145−0617 1 * Spec A145−0695 1 ~ Spec B−H
21 145−0625 1 Adapter, Air Cleaner (Spec A)Obsolete
22 Gasket, Air Cleaner Adapter140−2586 1 *^ Spec A−D140−2771−01 1 +~ Spec E−H
23 149−2457 1 Filter, Fuel24 149−2311−01 1 Pump, Fuel (Electric) (E2)
(Spade Terminal)25 823−1002−03 1 Screw, Pan Head Torx
(M6 x 1 x 10mm)26 503−1951−09 2 Clamp, Hose (.47”)27 1 Hose, Fuel
503−1759 1 Spec A (460mm)503−2735 1 Spec B−J (546mm)
28 146−0615 1 Solenoid, Fuel Cutoff (SpecB−C Non Emissions Only)
(E3)(Not ReplaceableSpec D−J)
29 898−1314−05 1 Sleeving, Convoluted30 870−2159 2 Nut, Flanged (M8 x 1.25mm)31 154−2818 2 Stud
32 Kits (Parts Without PartNumbers are Not SoldSeparately)
146−0646 1 Solenoid (Spec B, C) (For use with Carburetor146−0614 (IncludesSolenoid Valve Assy,Gaskets and Solenoid
Holder)146−0758 1 Carburetor (Spec B−H, J thru
S/N F120599) (For use withCarburetor 146−0741)(Includes Gaskets Marked ,Parts Marked +, Float, FloatPin, Float Valve andGaskets)
146−0651 1 Carburetor (Spec A−C) (For use with Carburetors146−0534 and 146−0614)(Includes Gaskets Marked �,Parts Marked ^, Float,Gaskets, Float Valve, FloatPin and Main Limiter Cap)
146−0759 1 Spec A (Includes GasketsMarked �, Parts Marked *and Carburetor 146−0534)
Spec B−C146−0743 1 Emissions Conversion Kit
(Includes GasketsMarked � and PartsMarked ~)(Converts to EmissionsCarburetor 146−0741introduced for Spec D)
146−0742 1 Spec D−H, Spec J thru S/NF120599 (Includes GasketsMarked) (Uses EmissionsCarburetor 146−0741)Obsolete
33 145−0695 1 Gasket, Carb Flange
� − Gaskets Included with Carburetors and Repair Kits.◊ − Carburetor Part Numbers are embossed on the
Carburetor.* − Parts Included with Carburetor (Spec A)~ − Parts Included with Emissions Carburetor Conversion Kit
(Spec B−C)^ − Parts Included with Carburetor Repair Kit (Spec A−C)+ − Parts Included in Carburetor Repair Kit (Begin Spec B and
During Spec J)⊃ − Parts Included with Carburetor (During Spec J)
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD18
Carburetor, Gasoline (KY Begin Spec J and KYD)
21
20
19
18
17
1016
9
8
1112
13
15
1
2
3
45
6
7
12
14
4
22
23
2425
25
26
27
38
37
36 35
34
33
32
31
30
29
28
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD19
Carburetor, Gasoline(KY Begin Spec J and KYD)
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 − 1 Gov, Instl Lever(See Governor page)
2 134−4919−01 1 Cover, Cylinder Air3 870−2159 2 Nut, Locking Flange4 154−2821 2 Gasket, Intake Elbow5 146−0530 1 Insulator, Head6 − 1 Rod, Govenor
(See Governor page)7 − 1 Spring, Govenor Rod
(See Governor page)8 134−5119 1 Assy, Cylinder Air Wrap9 815−0578 3 Screw, Pan Head Torx Thread
Form (M6 x 1 x 12mm)10 − 1 Spring, Governor
(See Governor page)11 123−1917 1 Tube, Breather12 503−1851 2 Clamp, Hose13 153−0638−01 1 Housing , Choke14 526−0003 1 Washer, Flat (3−16”)15 860−2005 1 Nut, Hex (M4)16 153−0651−02 1 Cover, Choke17 232−3720 1 Bearing, Flange18 153−0640 1 Element, Thermostat19 153−0659 1 Cover, Choke Element
20 153−0639 1 Linkage, Choke21 517−0305 1 Cap, Dome22 898−1314−05 1 Sleeving, Convoluted23 149−2457 1 Filter, Fuel24 503−2735 1 Hose, Fuel25 503−1951−10 2 Clamp, Hose26 823−1002−03 2 Screw, Pan Head Machine27 149−2311−02 1 Pump, Fuel (Electric)28 146−0533 1 Gasket, Carburetor 29 Kit, Carburetor
146−0742 1 Spec J Obsolete146−0785 1 Spec K
30 146−0532 1 Insulator, Carb31 140−2771−01 1 Gasket, Air Cleaner32 146−0531 1 Gasket, Insulator33 154−2815 1 Elbow, Intake34 145−0705−02 1 Adapter, Carb35 145−0695 1 Gasket, Carburetor Flange36 740−1004 2 Washer, Flat37 800−2046 2 Screw, Hex Head Cap
(M6 x 1 x 80mm)38 140−2536−06 1 Seal, Air Cleaner Spacer
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD20
Carburetor, Gasoline EVAP (KY Begin Spec K)
21
20
19
18
17
10 16
9
8
1112 13
15
1
2
3
45
6
7
12
14
4
22 23
24
25
26
27
38
37
36 35
34
33
32
31
30
29
28
9
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD21
Carburetor, Gasoline EVAP(KY Begin Spec K)
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
154−2838−34 1 Assy, Carburetor (IncludesParts Marked *)
1 − 1 Gov, Instl Lever(See Governor page)
2 134−4919−01 1 Cover, Cylinder Air3 870−2159 2 Nut, Locking Flange4 154−2821 2 Gasket, Intake Elbow5 146−0530 1 Insulator, Head6 − 1 Rod, Govenor (150−2392
See Governor page)7 − 1 Spring, Govenor Rod
(150−2391 See Governorpage)
8 134−5119 1 Assy, Cylinder Air Wrap9 815−0578 5 Screw, Pan Head Torx Thread
Form (M6 x 1 x 12mm)10 − 1 Spring, Governor (150−2390
(See Governor page)11 123−1917 1 Tube, Breather12 503−1851 2 Clamp, Hose13 153−0638−01 1 Housing , Choke14 526−0003 1 Washer, Flat (3−16”)15 860−2005 1 Nut, Hex (M4)16 153−0651−02 1 Cover, Choke
17 232−3720 1 Bearing, Flange18 153−0640 1 Element, Thermostat19 153−0659 1 Cover, Choke Element20 153−0639 1 Linkage, Choke21 517−0305 1 Cap, Dome22 110−3972 1 Spring, Valve23 148−1341−02 1 Bracket, Fuel24 43−0229−02 1 Tubing25 503−2879 1 Hose, Fuel26 503−2878 1 Hose, Fuel27 503−2877 1 Hose, Fuel28 146−0533 1 *Gasket, Carburetor 29 146−0785 1 *Kit, Carburetor30 146−0532 1 *Insulator, Carb31 140−2771−01 1 *Gasket, Air Cleaner32 146−0531 1 *Gasket, Insulator33 154−2815 1 *Elbow, Intake34 145−0705−02 1 *Adapter, Carb35 145−0695 1 *Gasket, Carburetor Flange36 740−1004 2 *Washer, Flat37 800−2046 2 *Screw, Hex Head Cap
(M6 x 1 x 80mm)38 140−2536−06 1 *Seal, Air Cleaner Spacer
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD22
CarburetorLP (KY Spec A−D)
3
4
5
6
7
8
12
16
17
14
10
21
22
28
10
19
22
29
3031
3233
35
36
37
13
20
15
24
26
27
23
18
1
2
11
10
9
25
38
34
19
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD23
CarburetorLP (KY Spec A−D)
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 146−0530 1 Insulator, Head2 154−2821 2 Gasket, Intake Manifold3 154−2815 1 Manifold, Intake4 154−2818 2 Stud5 870−2159 2 Nut, Flanged (M8 x 1.25mm)6 146−0531 1 Gasket, Manifold Insulator7 146−0532 1 Insulator8 146−0533 1 Gasket, Carburetor9 503−2006 1 Hose, Fuel (5.63” Lg)
(.375 ID x .75 OD)10 503−2094 3 Clamp, Hose11 503−1418 1 Hose, Fuel12 146−0602 1 Carburetor13 140−2586 1 Gasket, Air Cleaner Adapter14 145−0625 1 Adapter, Air Cleaner (Spec A)
Obsolete15 Gasket, Carburetor Flange
145−0617 1 Spec A145−0695 1 Begin Spec B
16 800−2046 2 Screw, Hex Head Cap(M6 x 1 x 80mm)
17 740−1004 2 Washer, Flat (M6)18 145−0687−02 1 Adapter, Air Cleaner
(Spec B−D)19 503−2015 2 Hose, Fuel (40”)
(.38 ID x .69 OD)20 502−0395 1 Connector, Hose
(1/8 NPT x 1/4” ID) (BeginningSpec E, Hose ConnectorSupplied with Regulator)
21 148−0987 1 Regulator (K2)(Includes InletFitting)
22 503−1851 3 Clamp, Hose23 307−2831−02 1 Stiffener, Bracket24 823−0003−06 1 Screw, Torx Pan Head
Thread Forming(M6 x 12mm)
25 821−0005 1 Screw, Lock Head Flange(10−32 x 1/2”)
26 148−0985−02 1 Bracket, Regulator27 821−0004 1 Screw, Flange Lock Hex
(#10−32 x 5/16”)28 502−1162 1 Fitting, Barbed Hose29 Valve Assy, Fuel (E3)
307−2501 1 LP Liquid sets307−2961 1 LP Vapor sets
30 502−0047 1 Nipple, Close31 502−1133 1 Coupling, Anchor32 149−2523−01 1 Line, Inlet Fuel (KY Begin
Spec B)(75 LG x 1/4−18 NPT)33 502−1214 1 Connector, Female
(1/4−18 NPT) (KY Begin Spec B and Spec 11276A)
34 502−1200 1 Fitting, Barbed Hose (Spec AExcept Spec 11276A)
35 Nipple502−1201 1 KY Spec A (Except 11276A)505−0071 1 KY Spec 11276A
36 Bracket, Solenoid307−2795−02 1 KY Spec A307−2824−02 1 KY Begin Spec B Obsolete
37 823−1002−03 1 Screw, Torx Pan Head(M6 x 1 x 10mm)
38 856−0006 2 Washer, EIT Lock Torx (M6)
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD24
CarburetorLP (KY Spec E−K and KYD Spec A)
36
35
34
33
32
3130
2928
27
26
25
24
23
22
21
20
19
18
17
16
15
13
1211
10
9
8
7
6
5
4
3
21
10
10
19
14
37
38
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD25
CarburetorLP (KY Spec E−K and KYD)
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
146−0722 1 Kit,Carburetor (IncludesParts Marked +)
1 146−0530 1 Insulator, Head2 154−2821 2 Gasket, Intake Manifold3 154−2815−02 1 *Manifold, Intake4 154−2818 2 Stud5 870−2159 2 Nut, Flanged (M8 x 1.25mm)6 146−0531 1 *+Gasket, Manifold Insulator7 146−0532 1 *Insulator8 146−0533 1 *+Gasket, Carburetor9 503−2006 1 *Hose, Fuel (5.63” Lg)
(.375 ID x .75 OD)10 503−1851 3 *Clamp, Hose11 146−0668 1 *+Carburetor12 140−2771−01 1 *+Gasket, Air Cleaner Adapter13 145−0695 1 *Gasket, Carburetor Flange
(KY Begin Spec B and KYD)14 104−2536−06 1 *Seal, Air cleaner Spacer15 800−2046 2 *Screw, Hex Head Cap
(M6 x 1 x 80mm)16 740−1004 2 *Washer, Flat (M6)17 145−0705−02 1 *Adapter, Air Cleaner18 503−2015 1 *Hose, Fuel (40”)
(.38 ID x .69 OD)19 503−1851 2 Clamp, Hose20 148−1013 1 *Regulator (K2)21 307−2831−02 1 Stiffener, Bracket22 823−0003−06 1 Screw, Torx Pan Head
Thread Forming(M6 x 12mm)
23 821−0005 1 Screw, Lock Head Flange(10−32 x 1/2”)
24 148−0985−02 1 Bracket, Regulator25 821−0004 1 Screw, Flange Lock Hex
(#10−32 x 5/16”)26 502−1162 1 Fitting, Barbed Hose27 307−2961 1 Valve, Fuel (Shut Off)28 502−0047 1 Nipple, Close29 502−1133 1 Coupling, Anchor30 149−2523−01 1 Line, Inlet Fuel (Begin Spec B)
(75 LG x 1/4−18 NPT)31 502−1214 1 Connector, Female
(1/4−18 NPT) (Begin Spec Band Spec 11276A)
32 505−0071 Nipple33 307−2997−02 1 Bracket, Solenoid34 823−1002−03 1 Screw, Torx Pan Head
(M6 x 1 x 10mm)35 856−0006 2 Washer, EIT Lock Torx (M6)36 154−2838−12 1 Carb Assy. (Includes
Parts Marked*)37 503−2015 1 Hose, LP Fuel38 898−1196−24 1 Sleeving, Convoluted
* − Parts Included in Carburetor Assy.
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD26
CarburetorLP (KY Begin Spec L and KYD Spec B)
31
1616
15
30
30
29
14
13
13
28
29
28
27
26
2524
23
17
12
10
10
9
11
8
7
6
5
5
44
3
2
19
18
2122
1
20
32
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD27
CarburetorLP (KY Begin Spec L and KYD Begin Spec B)
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 − 1 Governor, Install Lever(See Governor page)
2 134−4919−01 1 Cover, Cylinder Air3 154−2815−01 1 Elbow, Intake4 870−2159 2 Nut, Locking Flange (M8 x 1.25)5 154−2821 2 Gasket, Intake Elbow6 − 1 Insulator, Head
(See Governor page)7 − 1 Rod, Governor
(See Governor page)8 150−2391 1 Spring, Governor Rod9 134−5119 1 Assy Cylinder, Air Wrap
10 823−0003−06 3 Screw,Pan Head TorxThread Form(M6 x1x12mm)
11 − 1 Spring, Governor(See Governor page)
12 123−1977 1 Tube, Breather13 503−1851 1 Clamp, Hose14 148−1264−02 1 Bracket, Fuel Regulator15 148−1265−02 1 Bracket, Fuel Regulator16 823−0003−02 6 Screw,Pan Head Torx
Thread Form(M6 x1x14mm)
17 148−1266 1 Regulator, Fuel18 821−0018 2 Screw, Locking Head
(1/4−20UNC x 5/8”)19 503−2143−05 1 Hose, Vapor LPG20 140−2536−06 1 Seal, Air Cleaner Spacer21 146−0531 1 Gasket, Insulator22 146−0532 1 Insulator, Carbr23 146−0533 1 Gasket, Carborator24 146−0829 1 Mixer25 140−2771−01 1 Gasket, Air Cleaner26 145−0705−02 1 Adapter, Carb 27 145−0695 1 Gasket, Carb Flange28 740−1004 2 Washer, Flat (M6)29 800−2046 2 Screw, Hex Head Cap
(M6 x 1 x 80mm)30 503−2309 2 Clamp, Hose31 503−2289−06 1 Hose, Vent32 800−2027 1 Screw, Hex Head Cap
(M6 x 1 x 10mm)
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD28
Endbell(KY Spec A)
,
1
3
10
12
13
11
16
14
15
4 17
22
20 21
2
6
9
8
75
19
18
4
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 211−0437 1 Endbell, Obsolete2 516−0151 1 Pin, Roll3 509−0274−02 1 Seal, Endbell4 823−0002−04 4 Screw, Pan Head Torx
(M4 x .7 x 12mm)5 526−0003 2 Washer, Flat (#8)6 212−1283 1 Block Assy, Brush (Includes
Brush, Spring and Block)7 212−1282 1 Block, Brush8 212−1276−03 2 Spring, Generator Brush9 214−0103 2 Brush, Generator
10 140−2609 1 Element, Air Cleaner11 153−0641 1 Element, Thermostat Preheat12 145−0561 1 Cover, Air Filter Thermostat13 145−0615 1 Rod, Air Inlet
14 526−0018 1 Washer, Flat (1/4)15 800−0017 1 Screw, Hex Head Cap
(1/4−20 x 3−1/2”)16 140−2576 1 Cover, Air Cleaner17 160−1358 1 Magneto18 823−0003−04 1 Screw, Torx Pan Head
(M6 x 1 x 25mm)19 Regulator, Voltage (VR1)
305−0851 1 60 Hz305−0866 1 50 Hz
20 823−0007−01 1 Screw, Pan Head(M8 x 1.25 x 20mm)
21 337−2560 1 Strap, Bond22 856−0008 1 Washer, EIT Lock (5/16”)
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD29
Endbell(KY Begin Spec B and KYD)
13
15
4
10
11
8
34
9
12
20
17
18
1916
1
5
2
6 7,
6
7
14
21
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 Endbell211−0460 1 KY Spec B−H211−0497−00 1 Gasoline (KY Begin Spec J
and KYD)(Includes PartsMarked *)
211−0497−01 1 LP (KY Begin Spec J and KYD)(Includes PartsMarked *)
2 800−6296−01 4 Screw, Pan Head Torx ThreadForming (M6 x 25mm)
3 160−1358 1 +Magneto (G2) (KY Spec B−Hand KYD)
4 823−0002−09 2 Screw, Pan Head Torx(M4 x .7 x 16mm)
5 166−0866 1 Coil Ignition (KY Begin Spec Jand KYD, Includes Boot andTerminal)
6 167−0267 1 Terminal, Spark Plug7 167−1627 1 Boot, Spark Plug8 526−0003 2 *Washer, Flat (3/16”)9 212−1283 1 *Block Assy, Brush (Includes
Brush, Spring and Block)10 214−0103 2 *Brush, Generator11 212−1276−03 2 *Spring, Generator Brush
12 212−1283 1 *Block, Brush13 503−1351 1 +Hose, Preheat (Gasoline Units)
(KY Spec B−H and Part of J)14 517−0103 1 Plug (LP Units)15 509−0313 1 +O’Ring (Gasoline Units)
(KY Spec B−H and Part of J)16 Cable, Starter
226−4297 1 KY Spec B−H226−4795 1 KY Begin Spec J and KYD
17 815−0781 2 Screw, Hex Washer Head Cap(M8 x 1.25 x 30mm)
18 Starter (See Separate Page forComponents)
191−1798 1 KY Spec B−J191−2351 1 KY Begin Spec K and
KYD19 862−0001 1 Nut, Hex20 850−0040 1 Washer, Lock−Spring (1/4”)21 823−0003−04 2 Screw, Pan Head
* − Parts Included with Endbell Beginning Spec J.+ − Eliminated During Spec J.
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD30
Starter Components (KY Spec A−J)
15
2
3
4
8
9 10
6
11
7
12
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
191−1798 1 Starter (B1)1 191−1867 1 Cap Assy, End (Includes
Brushes)2 191−2155 1 Armature3 191−2156 1 Cap Assy, Drive (Includes
Bushing)4 191−2157 1 Kit, Drive (Includes Parts
Marked *)5 191−1821 1 *Retainer, Spring6 191−1870 1 *Spring, Pinion
7 191−1869 1 *Pin, Spiral Roll8 191−1863 1 *Cover, Spring9 191−1864 1 *Retainer, Clutch
10 191−1865 1 *Washer11 191−1868 1 *Gear, Starter12 191−1866 1 *Clutch and Spline
* − Parts Included in Drive Kit.
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD31
Starter Components(KY Begin Spec K and KYD)
54
3
2
6
1
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
191−2351 1 Starter, Complete (B1)1 191−2320 1 Retainer, Ring2 191−2156 1 Cap Assy, Drive (Includes
Bushing)3 191−2321 1 Armature4 191−2317 1 Cap Assy, End (Includes
Bushing)
5 191−2316 1 Holder Assy, Brush (IncludesBrushes)
6 191−2313 1 Kit, Drive (Includes RingRetainer, Retainer Spacer,Wave Washer, Spring, StarterGear, and Clutch/Spline)
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD32
Air Housing (KY Begin Spec B and KYD)
8
9
10
11
16
1718 5
1414
3
2
7
19
6
20
21
13
12
13
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
140−3295 1 Kit, Air Filter (Includes PartsMarked *)
1 134−5213 Housing, Air2 140−2854 1 Door, Preheat (Gasoline Units)3 509−0308 1 Seal, Air (Right)4 509−0305 1 Seal, Air (Left)5 526−0115 1 Washer, Flat (5/16”)6 823−0009−01 4 Screw, Torx Pan Head
Thread Forming(M6 x 1 x 20mm)
7 134−5031 1 Resonator, Intake8 134−5032 1 Cover, Resonator9 815−0838−02 4 Screw, Torx Pan Head
Thread Forming10 526−0012 4 Washer, Flat
(5.551D x 19.050 x 8)11 405−4896 1 Insulation, Inlet Baffle
12 140−2820−01 1 Cover, Air Cleaner13 865−0029 2 Nut, Wing14 140−3280 1 *Element, Air Cleaner15 140−2536−06 1 *Seal, Air Cleaner Spacer16 856−0008 1 Washer, EIT Lock (5/16”)17 Strap, Bond
337−2312 1 KY Spec B−H337−3467 1 KY Begin Spec J and KYD
18 823−0007−02 1 Screw, Pan Head ThreadForming (M8 x 1.25 x 25mm)
19 518−0649 1 Clip, Push−On (Gasoline Units)20 153−0664 1 Element, Thermostat (Gasoline
Units)21 98−6769 1 *Label, Air Cleaner
* − Parts Included in Air Filter Kit
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD33
Oil Base(KY Spec A)
1
2
3
9
8
7
6
5
4
10
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 102−1411 1 Base, Oil2 102−1412 1 Gasket, Oil Base3 815−0780 10 Screw, Hex Washer Head
(M8 x 1.25 x 35mm)4 502−0153 1 Plug, Hex Head Drain (1/4”)5 509−0282−02 1 O’Ring
6 868−0013 1 Nut, Jam (7/8−14)7 123−1944−01 1 Tube, Oil Fill8 509−0142 1 O’Ring9 123−1953 1 Indicator, Oil (Includes O’Ring)
10 308−1059 1 Switch, Oil Level (S2)
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD34
Oil Base(KY Begin Spec B and KYD)
89
1
34
5
6
2
7
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 815−0780 10 Screw, Hex Head Cap(M8 x 1.25 x 35mm)
2 502−0806 1 Elbow, Male (Spec 11320)3 502−0153 1 Plug, Drain (1/4−14 NPT)
(All Specs Except 11320)4 505−1492−02 1 Plug, Drain (3/4−14 NPT
5 509−0307 1 O’Ring6 123−2015 1 Indicator, Oil (Includes O’Ring)7 308−1059 1 Switch, Oil Level (S2)
(KY Spec B−K Only)8 102−1444 1 Base, Oil9 102−1412 1 Gasket, Oil Base
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD35
Exhaust(KY Spec A)
1
2
3
4
5
78
9
6
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 155−2683−02 1 Bracket, Muffler2 823−0007−01 2 Screw, Torx Pan Head
(M8 x 1.25 x 20mm)3 870−0236 1 Nut, Hex (#10−32)4 821−2046 1 Screw, Locking Flange
(M8 x 1.25 x 20mm)
5 155−2678 1 Muffler6 503−1533 1 Hose, Preheat (Gasoline)7 154−2816 1 Gasket, Exhaust8 520−2216 2 Stud, Exhaust9 870−2055 2 Nut, Locking Flange Hex
(M8 1.25)
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD36
Exhaust(KY Begin Spec B)
1
2
3
4
5
6
7
8
9
10
112
8
9
7 4
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 Stud, Exhaust520−2216 2 KY Spec B−H520−2215 2 KY Begin Spec J
2 154−2816 2 Gasket, Exhaust3 154−2975 1 Manifold, Exhaust (Includes
Tube)4 870−2193−04 4 Nut, Torque Hex (M8)5 402−0675 2 Isolator, Bottom Muffler
6 155−2783 1 Muffler7 402−0678 2 Isolator, Top Muffler8 526−0011 4 Washer, Flat (#10)9 823−1006−06 4 Screw, Pan Head Machine
(M5 x .8 x 20mm)10 503−1533−03 1 Hose, PreHeat11 800−2057 2 Screw
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD37
Exhaust(KYD)
1
2
89
10
11
3
7
6
5
4
3
4
5
7
7
12
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
541−0916 1 Kit, Muffler (IncludesParts Marked *)
1 155−4046 1 *Muffler2 154−2816 1 *Gasket, Exhaust Muffler3 508−1194 4 *Grommet4 155−4084 4 *Spacer, Muffler (Isolator)5 526−0113 4 *Washer, Flat6 526−0115 2 *Washer, Flat (5/16”)7 800−0026 6 *Screw, Hex Head
(5/16−18NC x 3/4”)
8 155−4063 1 Pipe, Exhaust9 154−2816 1 Gasket, Exhaust Manifold
10 503−1533−03 1 Hose, Preheat (3”)11 870−0557 2 Nut, Hex Flange (M8 X 1.25mm)12 520−2215 2 Stud, Exhaust
* − Parts Included in Muffler Kit.
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD38
KY Exhaust Kits
ExhaustTube
ElbowAdapter
Tailpipe
2
3
5 7
89
10
11
1213
14
3 3
14
6
&
7
1315
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 155−2850 1 Kit, Exhaust Tube (IncludesAdapter and Clamp)
2 155−2856 1 Adapter, Exhaust3 155−1256 1 *~Clamp4 155−2847 1 Kit, Exhaust Elbow Adapter
(Includes Exhaust Elbow andClamp)
5 155−2843 1 Elbow, Exhaust6 Kit, Exhaust Tailpipe
155−2845 1 540mm Tube (Includes PartsMarked *)
155−3263 1 559mm Tube (Includes PartsMarked ~)
7 Tube, Exhaust155−2844 1 * 540mm155−2844−01 1 ~ 559mm
8 155−2860 1 *~Insulator, Exhaust9 155−2861 2 *~Clamp, Exhaust
10 800−0031 2 *~Screw, Hex Head Cap5/16−18 x 1.5
11 155−2859 3 *~Backplate, Exhaust12 800−0026 1 *~Screw−Hex Head Cap
5/16−18 x .7513 862−0015 2 *~Nut, Hex 5/1614 155−2174 1 Hanger, Exhaust 1.5” O.D.15 155−2449 1 Resonator, Exhaust
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD39
“Blank Page”
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD40
Fuel Tank Kit
12
3
4
5
6
7
8
Obsolete
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
415−0584 1 Kit, Fuel Tank (Obsolete Kit OnlyComponents Available)
1 415−0511 1 Tank, Fuel (6 Gallon)2 505−0007 1 Bushing, Reducer (1/4” x 1/8”) 3 504−0169 1 Valve, Shutoff (1/8”)4 502−0395 1 Connector, Barbed Hose
(1/8”)
5 503−0708 1 Hose, Fuel (1/4” ID x 14”)6 503−0731 4 Clamp, Hose7 502−0397 1 Coupling, Quick Disconnect
Female8 502−0398 1 Coupling, Quick Disconnect
Male
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD41
Enclosure Base(KY Spec A)
12
34
5
6
7
8
7
9
10
11
12
13
1415
16
17
18
1920
2122
23
24
25
26
27
15
5
6
28
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 405−4306 1 Insulation, Exhaust2 402−0640 3 Isolator, Mounting3 331−0041 1 Nut, Lock4 405−4305−01 1 Base, Enclosure5 868−0002 2 Nut, Hex (5/16−24)6 Washer, Spring Lock (5/16”)
850−0045 2 60 Hz850−0045 4 50 Hz
7 823−1002−01 9 Screw, Torx Pan Head(M6 x 1 x 12mm)
8 307−2586 1 Relay, Start Solenoid (K1)9 809−0017 4 Screw, Round Head Steel
(#6 x 5/16”)10 319−1279−01 1 Bracket, Control11 300−4155 1 Board, PC12 332−0942 2 Tie, Cable13 508−0315 1 Grommet, Enclosure Base14 331−0521 1 Elbow, Conduit15 856−0008 4 Washer, EIT Lock (5/16”)
16 862−0015 2 Nut, Hex (5/16−1817 541−0540 3 Screw, Isolator Mounting
(Includes Washer)18 402−0641 3 Isolator, Snubber19 816−0101 1 Bolt, Carriage
(5/16−18 x 1−1/4”)20 155−2677−01 1 Gasket, Resonator21 155−2675 1 Adapter, Resonator22 155−2715 1 Clamp, Exhaust (1−3/4”)23 Elbow, Exhaust
155−2676 1 45° Angle155−2682 1 90° Angle
24 800−0730 1 Screw, Cap − Hex Head(5/16−18 x 1”)
25 405−4755−02 1 Edging, Base Pan (1675mm)26 508−1083−01 1 Edging, Base Pan (683mm))27 155−2644−02 1 Shield, Heat28 526−0029 3 Washer
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD42
Enclosure Base(KY Begin Spec B)
1
20
21
2
19
17
3
13
8
18
11
10
9
12
2322
24
2531
32
33
321
3
10
8
8
24
233
33
3
12
13
9
9
34
35
35
4
14
15
16
33
3
29
28
2523
24
24
23
26
27
30
3
56
7
36
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD43
Enclosure Base(KY Begin Spec B)
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 Base, EnclosureGasoline
405−4890−02 1 Spec B−D405−5336−02 1 Spec E405−5811−02 1 Begin Spec F
LP405−4890−02 1 Spec B, C405−5336−02 1 Spec D, E405−5811−01 1 Begin Spec F
2 508−0315 1 Grommet, Enclosure Base3 823−1002−03 14 Screw, Pan Head Torx
Machine (M6 x 1 x 10mm)4 331−0539−02 1 Clamp, Conduit (Not Included
With Spec 11580 or 11320)5 331−0115 1 Connector, Straight (1/2” Pipe
Thread) (Spec 11580)6 331−0255 1 Conduit (1/2” x 36”)
(Spec 11580)7 Bushing
508−0208 1 Snap (Begin Spec F ExceptSpec 11580 G & H)
331−0545 1 Armor (Spec 11580 G& H only)
8 402−0665 4 Isolator, Snubber (GasolineSpec B−D; LP Spec B, C)
9 402−0686−02 4 Tube, Spacer (GasolineSpec B−D; LP Spec B, C)
10 856−0008 4 Washer, EIT Lock (5/16”)11 862−0015 2 Nut, Hex (5/16−18)12 526−0014 4 Washer, Flat (7/16”) (Gasoline
Spec B−D; LP Spec B, C)13 Screw, Hex Head Thread
Forming (M10 x 1.5 x 70mm)Gasoline
815−0842−05 4 Spec B−D (Hex Head)815−0874−01 4 Begin Spec E (Socket
Head)LP
815−0842−05 4 Spec B, C815−0874−01 4 Begin Spec D
14 402−0641 2 Isolator, Snubber (Gasoline Begin Spec E; LP BeginSpec D)
15 526−0032 2 Washer, Flat (Gasoline Spec E;LP Spec D)
16 Screw, Isolator
541−0540 2 Spec D/E−H (IncludesWasher) (Gasoline Spec E;LP Spec D)
815−0785 2 Begin Spec J17 Cover, Drain
Gasoline405−4964−02 1 Spec B−D102−1456−02 1 Begin Spec E
LP405−4964−02 1 Spec B, C102−1456−02 1 Begin Spec D
18 800−0030 1 Bolt, Carriage(5/16−18 x 1−1/4”)
19 508−1093−01 1 Edging (2388mm)20 402−0664−02 2 Isolator, Engine End21 402−0664−01 2 Isolator, Generator End22 815−0943−02 1 Screw, Torx Pan Head (Begin
Spec J)23 868−0002 2 Nut, Hex (5/16−24)24 850−0045 2 Washer, Spring Lock (5/16”)25 307−2586 1 Relay, Start Solenoid (K1)26 Board, PC
300−4320 1 Spec B−E300−4923 1 Spec F−H300−5046 1 Begin Spec J
27 Bracket, Control 319−2152−03 1 Spec B−H319−3811−02 1 Begin Spec J
28 809−0017 4 Screw, Round Head Steel(#6 x 5/16”) (60Hz, 120V,Gasoline Units) (Spec B−H)
29 Regulator, Voltage (VR1)(Spec B−H) (60Hz, 120V,Gasoline Units)
305−0851 1 60 Hz305−0866 1 50 Hz
30 823−1002−04 1 Screw, Torx Pan Head (SpecB−H) (M6 x 14mm)
31 508−1091 1 Seal, Barrier Edge32 405−4892−02 1 Barrier, Exhaust33 870−2054 2 Nut, Flange Lock (M6 x 1)34 405−4895 1 Insulation, Exhaust Barrier35 518−0581 4 Nut, Push−On36 332−3108 1 Terminal, Ground
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD44
Enclosure Base(KYD)
1
2
34
6
89
13
12
11 10
7
3
4
11
22
21
21
20
20
19 18
17
16
15
14
8
4
4
6
7
5
4
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD45
Enclosure Base(KYD)
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 403−5029−02 1 Base, Enclosure2 508−0315 1 Grommet, Enclosure Base3 815−0874−01 4 Screw, SKT TH Head Torx4 823−1002−03 10 Screw, Pan Head Torx
(M6 x 1 x 10mm)5 331−0539−02 1 Clamp, Conduit6 815−0785 2 Screw, Isolated Mounting7 402−0641 2 Isolator, Snubber8 856−0008 3 Washer, EIT Locking (5/16”)9 862−0015 1 Nut, Hex (5/16−18 UNC)
10 405−7661 1 Shield, Exhaust Insulation11 508−0333 4 Edging12 402−0664−02 2 Isolator, Mount
13 402−0664−01 2 Isolator, Mount14 800−0030 1 Screw, Hex Head
(5/16−18 NC x 1.25)15 508−0208 1 Bushing, Snap16 337−3467 1 Strap, Bond17 327−1413 1 PCB, Control18 319−3811−02 1 Bracket, Control Mounting19 815−0943−02 1 Screw, Hex Washer Head
Thread Forming (1/4−20 x .5”)20 868−0002 2 Nut, Hex Jam (5/16−24UNC)21 850−0045 2 Washer, Split Locking (5/16”) 22 307−2586 1 Relay, Start Solenoid
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD46
“Blank Page”
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD47
Generator Enclosure(KY Spec A)
1
2
3
4
5
6
7 8
9
10
11
12
6
12
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 405−4524 1 Cover Assy, Enclosure (Includes Parts Marked *)
2 518−0623 6 *Clip, Christmas Tree3 508−0315 1 *Grommet, Remote4 405−4308 1 *Insulation, Inlet5 526−0394 6 *Washer, Flat (Special)6 823−0010−01 5 Screw, Shoulder Torx
(M6 x 14mm)7 405−4307−02 1 Insulation, Upper Exhaust Baffle8 405−5154 1 *Panel, Service (Includes
Latches, Insulation, Label,Gasket and Washers)
9 406−0737−02 2 Pawl, Latch (Early Spec A)10 406−0739 2 Latch, Service Panel (Early
Spec A)11 406−0779 2 Latch Assy, Service Panel
(Later Spec A)12 870−2198 2 Nut, Hex (M22 x 1.5)
* − Parts Included in Enclosure Cover.
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD48
Generator Enclosure(KY Begin Spec B and KYD)
,7 8 9,
1
5
2
3
11
13 17
21
18
20
1619
1014
6
17
22
15
13
13
12
2 6~
7
11
4
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD49
Generator Enclosure(KY Begin Spec B and KYD)
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
541−0556−01 1 Kit, Enclosure Cover Includes(KY Enclosure Cover Assy.)
1 Cover Assy, Enclosure(Includes Parts Marked *)
405−4954 1 KY Spec B−E405−5826−01 1 KY Spec F−H405−6383−01 1 KY Begin Spec J405−7552 1 KYD
2 *Grommet508−0315 1 KY Spec B−E508−1116 1 KY Begin Spec F and KYD
3 818−0226−02 2 *Rivet4 *Insulation, Cover
405−4894 1 KY Begin Spec B405−7662 1 KYD
5 518−0581 2 *Nut, Push−On6 *Panel Assy, Service
(Includes Parts Marked +)405−4956 1 KY B−H (Obsolete)405−6384−01 1 KY Begin Spec J405−6384−03 1 KYD
7 405−4958 1 +Insulation, Door8 526−0394 3 +Washer, Flat (Special)9 405−4311−01 1 +Gasket, Service Panel
(250mm)10 870−2198 2 +Nut, Hex (M22 x 1.5)11 406−0779 2 +Latch Assy, Service Panel
(Includes Pawl and Latch)12 98−6806 1 Label, Charger
13 870−2062 4 Nut, Lock (M5 x .8) (50Hz,100V−60Hz)
14 856−0003 1 Washer, EIT (#10) (50Hz,100V−60Hz)
15 332−3292 1 Terminal, Spade (50Hz,100V−60Hz
16 800−2012 2 Screw, Hex Head Cap(M5 x .8 x 30mm) (50 Hz,100V−60Hz)
17 526−0009 3 Washer, Flat (M5) (50 Hz,100V−60Hz)
18 405−4967−03 1 Bracket, Inlet Insulation(60 Hz) (Spec B−H)
19 305−0784 1 Charger, Battery (50 Hz,100V−60Hz)
20 405−4966 1 Insulation, Inlet (60 Hz)(Spec B−H)
21 823−1002−01 3 Screw, Torx Pan Head(M6 x 1 x 12mm) (60 Hz)(Spec B−H)
22 823−0010−01 4 Screw, Torx Shoulder (M6)
* − Included in Enclosure Cover Assy.+ − Included in Service Panel Assy.
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD50
Underfloor Mounting Kit(KY Begin Spec B)
13
4
8
9
5 6
10
2
7
1
56
6
7
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
403−3670 1 Kit, Underfloor Mounting1 403−3672 2 Panel, Underfloor2 821−0014 4 Screw, Hex Head Lock Flange
(5/16−18 x .5”)3 403−3396−02 1 Panel, Back4 508−0315 1 Grommet, Remote5 800−0048 8 Screw, Hex Head Cap
(3/8−16 x .75”)
6 526−0174 12 Washer, Flat (3/8” Hardened)7 403−3669−02 2 Rail, Underfloor8 800−0026 6 Screw, Hex Head Cap
(5/16−18 x .75”)9 526−0122 6 Washer, Flat (5/16” Hardened)
10 870−0513−02 4 Nut, Hex Flange Lock (5/16−1)
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD51
Underfloor Mounting Kit(KYD)
1
2
3
5
4
6
7
8
10
9
5
6
73
10
2
1
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
541−0938 1 Kit, Mounting (Underfloor)1 403−5135−02 2 Rail, Mounting2 403−3672 2 Panel, Under Floor3 526−0174 8 Washer, Flat4 403−5136−02 1 Mount, Generator5 526−0122 4 Washer, Flat (5/16”)6 800−0026 4 Screw, Hex Head Cap
(5/16−18 x .75”)
7 800−0048 8 Screw, Hex Head Cap(5/8−16 x .75”)
8 508−0315 1 Grommet, Remote9 870−0513−02 4 Nut, Hex Flanged (5/16”)
10 821−0014 4 Screw, Locking Head(5/16−18 x 1/2”)
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD52
Underfloor Mounting Kit(KY Spec A)
1
2
3
4
5
6
7
8 15
8
6
76
7
6
7
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
403−3608 1 Kit, Underfloor Mounting(Replaced by 403−3670)
1 403−3579−02 2 Panel, Side2 403−3580−02 2 Brace, Back3 403−3581−03 1 Rail, Bottom (w/o Weldnuts)4 403−3581−04 1 Rail, Bottom (w/o Weldnuts)
5 526−0174 16 Washer, Flat (3/8”)6 800−0026 6 Screw, Hex Head Cap
(5/16−18 x 3/4”)7 526−0122 6 Washer, Flat (5/16”)8 800−0049 12 Screw, Hex Head Cap
(3/8−16 x .88”)
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD53
KY Underfloor Housing/Base Kit
3
4
5
6
7
8
9
14
10
1 1311
12
2
12
14
15
16
16
2
1112
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 405−4241 1 Kit, Housing (Includes PartsMarked +)
2 405−4662 1 +Panel, Housing (Rear)3 405−4663 1 +Panel, Housing (LH)4 405−4237 1 +Panel, Housing (RH)5 405−4668−01 1 +Cover, Panel6 508−0071 3 +Grommet, Rubber (.62 Id)7 508−0055 1 +Grommet, Rubber (1.50 Id)8 813−0098 1 +Screw, RH (#10−32 X.375)9 856−0008 2 +Washer, EIT Lk (5/16)
10 850−0030 1 +Washer, Lock (#10)11 800−0026 16 +Screw, Hex Head Cap
(5/16−18 X .75)
12 526−0122 22 +Washer, Flat (5/16”)13 403−3630 1 Kit, Underfloor Base (Includes
Parts Marked *)14 403−3631−02 1 *Base, Underfloor15 800−0026 14 *Screw, Hex Head Cap
(5/16−18 X .75)16 526−0122 22 +Washer, Flat (5/16 )
* − Parts Included in Base Kit.+ − Parts Included in Housing Kit.
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD54
Generator/Control(KY Spec A)
22
12
3
4
5
6
7
8910
11
1215
17
18
19
21
20
23
24
25 26
27
28
29
31
32 30
3334
35 3637
3839
16
4
32
40
13 14, ,
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD55
Generator/Control(KY Spec A)
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 870−2054 1 Nut, Locking Flange (M6 x 1) (LP)
2 145−0619 1 Shield, Carburetor (Gasoline)3 319−1738−02 1 Shield, Control (LP)4 823−0009−01 5 Screw, Torx Pan Head
(M6 x 1 x 14mm)5 815−0694 2 Screw, Slotted w/ET
(#6−32 x 1/4”)6 308−0969 1 Bezel7 Panel, Control
319−1412 1 60 Hz319−1554−02 1 50 Hz
8 517−0133 1 Plug, Hole (50 Hz)9 303−0303 1 Potentiometer Assy (R5)
(50 Hz) (Includes Lead,Bracket and Potentiometer)
10 303−0275 1 Potentiometer (R5)(50 Hz)11 Breaker, Circuit (CB1)
320−1323 1 60 Hz (30 Amp)320−1780−01 1 50 Hz (15 Amp)
12 166−0784 Coil Assy, Ignition (IncludesSpark Plug Terminal and Boot)
13 167−0267 1 Terminal, Spark Plug14 167−0265 1 Boot, Spark Plug15 823−0002−04 2 Screw, Torx Pan Head
(M4 x .7 x 12mm)16 823−0007−02 4 Screw, Torx Pan Head
(M8 x 1.25 x 25mm)17 220−4416 1 Housing, Stator18 Stator, Generator
220−4485−01 1 60 Hz220−4485−03 1 50 Hz
19 201−3538 1 Rotor Assy (Includes Bearingand Collector Ring)
20 515−0289 1 Key, Fan Hub21 204−0141 1 Ring, Collector22 510−0157 1 Bearing, Rotor23 509−0285 1 O’Ring24 815−0787 2 Screw, Torx Socket Head
(M6 x 1 x 70mm)25 134−4918 1 Housing, Scroll26 205−0199 1 Wheel Assy, Blower27 815−0778 1 Bolt, Rotor Thru (3/8−24 x 9.5”)28 526−0392 1 Washer, Fan Hub29 823−0003−03 3 Screw, Torx Pan Head
(M6 x 1 x 20mm)30 1 Endbell Assy (See Separate
Page for Components)31 750−1006 2 Nut, Hex (M8)32 740−1006 4 Washer, Flat (M8)33 191−1798 1 Starter (B1) (See Separate
Page for Components)34 720−1038 2 Screw, Hex Head Cap
(M8 x 30mm)35 226−4297 1 Cable, Starter36 850−0040 1 Washer, Lock−Spring (1/4”)37 862−0001 1 Nut, Hex (1/4−20)38 823−0008 1 Screw, Pan Head Torx
(M4 x .7 x 60mm)39 304−0796 2 Washer, Center (M4)40 870−0236 1 Nut, Hex (#10−32)
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD56
Generator(KY Begin Spec B and KYD)
16
15
17
18
19
1
234
5
8
7
9
13
10
14
12
6
12
13
20
10
11
11
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD57
Generator(KY Begin Spec B and KYD)
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 Rotor Assy, (Includes Bearing)60 Hz
201−3538 1 Spec B−H201−3539−01 1 Begin Spec J KY
Spec B KYD50 Hz
Gasoline201−3538 1 Spec B−D201−3539 1 Begin Spec E
LP201−3538 1 Spec B−C201−3539 1 Begin Spec D
2 510−0157 1 Bearing, Rotor3 204−0141 1 Ring, Collector4 515−0289 1 Key, Hub5 509−0285 1 O’Ring 6 526−0392 1 Washer, Fan Hub7 815−0778 1 Bolt, Rotor Thru
(3/8−24 x 9−1/2”)8 Wheel Assy, Blower
(Includes Magnet)205−0199−S0 1 Spec B−H205−0263 1 Begin Spec J
9 Stator, Generator60 Hz
Spec B−H220−4485−S5 1 120V220−4485−04 1 100V
Begin Spec J KYSpec B KYD
220−4586−01 1 120V220−4586−02 1 100V
50 HzGasoline
220−4485−S3 1 Spec B−D220−4490−S1 1 Spec E−H220−4586−11 1 Begin Spec J KY
Spec B KYDLP
220−4485−S3 1 Spec B−C220−4490−S1 1 Spec D−H220−4586−11 1 Begin Spec J
10 Clamp (50Hz)232−3881 2 Spec B−H (Angled)232−4030 2 Begin Spec J (Flat)
11 526−0018 2 Washer, Flat (60Hz) (BeginSpec J)
12 Screw, Torx Socket Head815−0787 2 60 Hz (M6 x 1 x 70mm)815−0936 2 50 Hz (M6 x 1 x 100mm)
Begin Spec B13 815−0829−05 4 Screw, Pan Head − Torx
Thread Forming(M8 x 1.25 x 25mm)
14 Housing, Stator60 Hz
Begin Spec B KYD220−4572−01 1 Gasoline Units220−4572−02 1 LP Units
50 Hz220−4572−03 1 Begin Spec B
15 315−0735−03 1 Bracket, Transformer(50 Hz,100v−60Hz)(Spec B−H)
16 518−0533 1 Clip(50 Hz,100v−60Hz)(Spec B−H)
17 823−0003−06 1 Screw, Torx Pan HeadThread Forming(50 Hz,100v−60Hz)(Spec B−H)(M6 x 1 x 12mm)
18 815−0829−04 1 Screw, Thread Hex FlangeForming (M8 x 1.25 x 16mm)(Spec B−H) (50 Hz,100V−60Hz)
19 315−0736 1 Transformer, Voltage (T1)(Spec B−H) (50 Hz,100V−60Hz)
20 823−1002−01 2 Screw, Pan Head Torx Machine (M6 x 1 x 12mm)(Spec B−H) (50 Hz,100V−60Hz)
When a Rotor is ordered for KY Spec A or B prior to Serial #H943219685 then use a 201−3538−S0 Rotor and one of the FollowingStators unless it has already been replaced:
60Hz − Spec A, Order 220−4485−0160Hz − Spec B Order 220−4485−0550Hz − Spec A or B Order 220−4485−03.
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD58
Control(KY Spec B−H)
, ,
,
1
2 3
4
5 7
6
8
9
10
11 12 1314
15
16
1718
15
10
19
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 Breaker, Circuit (CB1)60 Hz
320−1323 1 30A (120V Sets)320−1780−02 1 20A (100V Sets)
50 Hz320−1780−01 1 15A320−1780−03 1 17A320−1780−02 1 20A
2 303−0308−01 1 Potentiometer Assy (R5)(50 Hz and 100V/60Hz)(Includes Lead, Bracket andPotentiometer)
3 303−0275 1 Potentiometer (R5) (50 Hz and100V/60Hz)
4 Panel, Control319−2176−03 1 60 Hz319−2213−03 1 50 Hz
5 517−0133 1 Plug, Hole (50 Hz Only)6 308−0852 1 Switch, Start/Stop (S1)7 Screw, Cross Pan Head
Recessed w/ET (#6−32 x 1/4”)60 Hz
815−0549 2 120815−0549 4 100V815−0549 4 50 Hz
8 853−0013 1 Washer, ET Lock (1/4”)9 823−0003−06 1 Screw, Torx Pan Head
Thread Forming60 Hz (M6 x 1 x 12mm)
10 823−0002−04 2 Screw, Torx Pan Head(M4 x .7 x 12mm)
11 166−0818 1 Coil Assy, Ignition (T1−Ign)(Includes Terminal and Boot)
12 167−0267 1 Terminal, Spark Plug13 167−1627 1 Boot, Spark Plug14 823−0003−01 2 Screw, Torx Pan Head
(M6 x 1 x 10mm)15 526−0018 2 Washer, Flat (1/4”)16 145−0689 1 Shield, Carburetor17 823−1002−03 1 Screw, Pan Head Torx
(M6 x 1 x 10mm)18 526−0018 1 Washer, Flat (1/4”)19 Harness, AC Output
338−2909 1 60 Hz338−3049 1 50 Hz
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD59
Control Panel(KY Begin Spec J and KYD)
3
107
56
14
12
11
13
9
18
2
4
1
15
9
10
10
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
1 526−0018 1 Washer, Flat (1/4”)2 815−0578 1 Screw, Pan Head Torx
(M6 x 1 x 10mm)3 315−0736 1 Transformer, Voltage (T1)
(100V, 230V)4 870−2054 2 Nut, Lock Flange (100V, 230V)5 303−0332 1 Potentiometer Assy (R5)
(100V, 230V) (Includes Lead,Bracket and Potentiometer)
6 303−0331 1 Potentiometer (R5) (100V,230V)
7 Breaker, Circuit (CB1)320−1780−03 1 17A (Spec 26119, 33742)320−1780−02 1 20A (Spec 11429, 65697,
11572)320−1323 1 30A (Spec 11580,
26100, 26120)8 145−0689 1 Shield, Carburetor9 823−0003−02 3 Screw, Torx Pan Head
(M6 x 1 x 14mm)
10 Washer, ET Lock (1/4”)853−0013 2 (120V, 60Hz)853−0013 3 (100V, 230V)
11 308−1038 1 Switch, Start/Stop (S1)12 Screw, Cross Pan Head
Recessed w/ET (#6−32 x 1/4”)815−0549 2 120V815−0549 4 100V, 230V
13 823−1002−04 2 Screw, Torx Pan Head(M6 x 14mm) (100V, 230V)
14 319−3844−02 1 Panel, Control15 Harness, AC Output
338−3814 1 3−wire (Spec 11572,11580, 26100, 26120)
338−3815 1 4−wire (Spec 11429, 26119,33742, 65697)
16 Label, Control98−7634−01 1 17 Amp, 2 Pole98−7634−02 1 20 Amp, 2 Pole98−7634−03 1 30 Amp, 1 Pole
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD60
Generator Harness(KY Spec A)
1
2
3
4
5
6
7
89
11
10
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
Harness, Generator338−2568−01 1 60 Hz338−2568−02 1 50Hz
1 305−0935 1 Rectifier, Bridge (CR1)2 304−0794 1 Resistor (R1)3 332−0942 13 Tie, Cable4 332−3108 1 Terminal, Ground
5 321−0312−01 1 Fuse (5 Ampere)(F1)6 308−0968 1 Switch, Start/Stop (S1)7 323−1314 1 Connector, Plug (12 Pin)(P4)8 323−1252 1 Connector, Plug (15 Pin)(P1)9 323−1200 21 Pin, Contact
10 323−1527−01 1 Connector, Plug (P6)11 323−1527−02 1 Connector, Plug (P5)
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD61
Generator Harness(KY Spec B−F)
7 8
3
5
4
1
2
10
9
11
6,
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
Harness, Generator60 Hz
Gasoline338−3022−01 1 120 Volt (Includes
Parts Marked *)100Volt
338−3123−01 1 Isolated Neutral(Includes PartsMarked * and +)
338−3379−01 1 Grounded Neutral(Includes PartsMarked * and �)
338−3022−02 1 LP (Includes PartsMarked *)
50 Hz (Includes PartsMarked * and ♦
338−3023−01 1 Gasoline338−3023−02 1 LP
1 321−0312−02 1 *Fuse Assy (F1) (Includes5A Fuse)
2 321−0307−03 1 *Fuse, 5A (F1)3 323−1314 1 *Connector, Plug (12 Pin)(P4)4 323−1199 12 *Pin,Contact5 323−1253 1 *Cap, Circuit (15 Pin)(J1)6 *Socket, Contact
323−1200 9 120V, 220V323−1200 7 100V
7 323−1527−01 1 *Connector, Plug (P6)8 323−1527−02 1 *Connector, Plug (P5)9 304−0805−03 1 �+Resistor, Fixed (10K ohm)
(P4−4 to P4−5)10 338−2807 1 ♦+Harness, Splitter (Includes
Boot)11 167−1636 1 Boot, Insulating
* − Parts Included with all Harnesses+ − Parts Included in 100V, Isolated Neutral Harness� − Part Included in 100V, Grounded Neutral Harness♦ − Part Included in 50Hz Harnesses.
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD62
Generator Harness(KY Spec G−H)
1
2
34
5
67 8
9
10
11
,
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
Harness, Generator60 Hz
Gasoline338−3639−02 1 120 Volt (Includes
Parts Marked *)100 Volt
338−3641−01 1 Isolated Neutral(Includes PartsMarked * and +)
338−3638−01 1 Grounded Neutral(Includes PartsMarked * and �)
338−3639−02 1 LP (Includes PartsMarked *)
50 HzGasoline
338−3640−01 1 230 Volt (IncludesParts Marked *and ♦)
338−3661−01 1 100 Volt (IncludesParts Marked *and +)
LP338−3640−02 1 230V (Includes
Parts Marked *and ♦)
338−3661−02 1 100 Volt (IncludesParts Marked *and +)
1 321−0312−02 1 *Fuse Assy (F1) (Includes5 Amp Fuse)
2 321−0307−03 1 *Fuse, 5 Amp (F1)3 323−1314 1 Connector, Plug (12 Pin)(P4)4 323−1199 12 *Pin,Contact5 323−1253 1 *Cap, Circuit (15 Pin)(J1)6 *Socket, Contact
323−1200 9 120V, 220V323−1200 7 100V
7 323−1527−01 1 *Connector, Plug (P6)8 323−1527−02 1 *Connector, Plug (P5)9 304−0805−03 1 �+Resistor, Fixed (P4−4 to P4−5)
(10K ohm, 100V Only)10 338−2807 1 ♦+Harness Assy, Splitter
(Isolated Neutral Harnessesonly. Includes Boot)
11 167−1636 1 Boot, Insulating
* − Parts Included with all Harnesses+ − Parts Included with 100V, Isolated Neutral Harness.� − Part Included in 100V, Grounded Neutral Harness♦ − Part Included in 50Hz Harness.
Redistribution or publication of this documentby any means, is strictly prohibited.
-
KY/ KYD63
Engine Harness(KY Begin Spec J and KYD)
1 2
3
4
7
11
9
10
12
5
8
6
P1
J2
P5, P6
,
P9
REF PART QTY PART REF PART QTY PARTNO. NO. USED DESCRIPTION NO. NO. USED DESCRIPTION
Harness, Engine60 Hz
Gasoline338−3813 1 100 Volt338−3812 1 120 Volt
LP338−3813 1 50 Hz
1 323−1527−01 1 Connector, Plug (P6)2 323−1527−02 1 Connector, Plug (P5)3 323−1605−01 1 Connector, Plug (P1) (23 Pin)
4 323−1615 5 Plug, Cavity (P1)5 323−1614−01 AR Socket, Terminal (P1)6 167−1636 1 Boot, Insulating (Not Used
on 338−3812)7 323−1743 1 Connector, Plug (J2)(8 Pin)8 323−1709 7 Terminal, Socket (J2)9 323−1712 1 Plug, Cavity (J2)
10 323−1708 7 Seal, Cable (J2)11 323−1741 1 Housing,