8/12/2019 95-105-02

1/2

SOLAR ENERGY

SOLUTIONS

(Please read the SUNGEN installation guide book for the step-by-step installation guidelines.)

Product FeaturesHigh performance and energy yield photovoltaic modulesmade of amorphous siliconIntegrated bypass diode in the junction box reduces thepower loss effect in a string caused by events such asshadingPVB film with high quality TCO glassModule is glass to glass laminatedWater-protected connector system

Easy for installation

Quality and SafetyProduct warranty: Free from defects in material andworkmanship for 10 yearsPower warranty: Maintain more than 90% minimum ratedpower for 10 years and 80% minimum rated power for 25yearsEN/IEC 61646 certifiedEN/IEC 61730 certifiedUL1703 certified

ApplicationsOn-grid PV SystemsOff-grid PV SystemsResidential Roof Top SystemsCommercial Roof Top SystemsGround Installations

Amorphous Silicon Solar ModulesSG-HN-GG Series 95W/100W/105W

Solar Panel Build and Transfer EPC Build and Lease Build and Sell Build and Invest

www.SUNGEN.com

OHSAS 18001

8/12/2019 95-105-02

2/2WWW.SUNGEN.COMSGTF.0313.A004W

SG-HN-GG Series 95W/100W/105W

SUNGEN Amorphous Silicon Solar Modules

Specifications

Characteristic Curves(SG-HN100-GG)

1.35A

1.67A92.0V

95WSG-HN95-GG

70.0V

100WSG-HN100-GG

1.42A

1.74A92.0V

70.5V

Maximum power (Pmax)

Open- circuit voltage (Voc)Short- circuit current (Isc)Voltage at maximum power (Vpmax)Current at maximum power (Ipmax)Temperature coefficient-open circuit voltage ( )Temperature coefficient-short circuit current ( )Temperature coefficient-power ( )

105WSG-HN105-GG

1.48A

1.81A92.5V

71.0V

CellDimensionsWeightFrameFront glass

Back glassJunction box typeMaximum system voltageMaximum mechanical loadSeries fuse ratingFire ratingNominal Operating Cell Temperature (NOCT)Operating temperature (cell)Storage temperatureStorage air humidity

a-Si single junction1400mm 1100mm 7.1mm (55.1 inches 43.3 inches 0.3 inches)

26.0Kg (57.3 lbs)None

3.2mm thickness3.2mm thickness

3AClass C

Snow load: 5400Pa(IEC Standard) ; Wind load: 2400Pa(IEC Standard)1000VDC (TV-EN/IEC61646) / 600VDC(UL)

0.13%/K -0.36%/K

-0.268%/K

Module Performance, Stabilized (red curve),Initial (dark curve)

Typical Characteristics at Different Irradiances Performance of Voc and Isc at Low Irradiance

The power output is subject to a manufacturing tolerance of 3%; Electrical parameter tolerance 10%.

The electrical data applied under standard test conditions (STC): irradiance of 1000 W/m 2 with an AM1.5 spectrum at a cell temperature of 25C.

Model