9 jan 2018 tuesday morning p-1 chair · 9 jan 2018 tuesday morning room 1 p-1 session: opening and...

9 Jan 2018 Tuesday

Morning Room 1 P-1

Session:

Opening and Plenary Session (1)

Chair: A. Fatemi Robert Bosch GmbH, Renningen, Germany

09:30 – 09:40 C. Bolay Lord Mayor City of Ostfildern Welcome Address

H.-J. Mesenholl Technische Akademie Esslingen e.V., Ostfildern, Germany Opening

W. J. Bartz T+S Tribologie und Schmierungstechnik, Denkendorf, Germany Greetings of the Honorary Chairman

09:40 – 10:00 C. Wincierz Evonik Resource Efficiency GmbH, Darmstadt, Germany Tribute to Professor Peter Jost

10:00 – 10:30 L. Lindemann, A. Gosalia FUCHS PETROLUB SE, Mannheim, Germany The Lubricants Industry in (E)Motion: E-Mobility, Technology, Sustainability

10:30 – 11:00 Break – Exhibition

11:00 – 11:30 M. Anderson Falex Corporation, Sugar Grove, USA Can Tribology save the World?

11:30 – 12:00 K. Kreisköther RWTH Aachen University, Germany Quo Vadis Electric Mobility? – Power Trains for the Electric Cars of the Future

12:00 – 12:30 T. Garbe Volkswagen Aktiengesellschaft, Wolfsburg, Germany E-Gas – An Important Element on the Way to CO2-Neutral Mobility


4

9 Jan 2018 Tuesday

Afternoon Room A-1

Session:

Base Oils (1)

Chair:

R. Zechel Klüber Lubrication München SE & Co. KG, München, Germany

14:00 – 14:30 S. Meinhardt ExxonMobil Chemical Central Europe GmbH, Köln, Germany Metallocene Based Polyalphaolefins (mPAO) – Building Blocks For Industrial Gear Oils

14:30 – 15:00 D. Schäffel, S. Fleischer Clariant, Frankfurt, Germany Polyalkylene Glycols as a Base Fluid for Gear Oils under Sustainability Aspects

15:00 – 15:30 F. Rittig, N. Kashani, K. Geyer, A. Minke, K. Molawi, P. Ma BASF SE, Ludwigshafen, Germany New High Viscosity Basestock for Gear Applications


5

9 Jan 2018 Tuesday

Afternoon Room A-2

Session:

Engine Oils (1)

Chair:

M. Seemann Evonik Industries AG, Darmstadt, Germany

14:00 – 14:30 C. Warrens, S. Balakrishnan BP, Pangbourne, United Kingdom Formulating Engine Oils to Optimise FE Benefits in Current and Future Car Engines

14:30 – 15:00 P. Hutchinson, F. Lauterwasser, C. Wincierz Evonik Oil Additives GmbH, Darmstadt, Germany Improving Vehicle Fuel Efficiency through Viscosity Index Improver in Engine Oils

15:00 – 15:30 G. Miró, S. Bastidas, B. Tormos, L. Ramirez Universitat Politècnica de València, Valencia, Spain T. Pérez Repsol, Móstoles, Spain Assessment of New Engine Oil Formulations based on Fuel Consumption Reduction in a Diesel Engine


6

9 Jan 2018 Tuesday

Afternoon Room A-3

Session:

Lubricant Films

Chair:

D. Shakhvorostov Evonik Oil Additives GmbH, Darmstadt, Germany

14:00 – 14:30 J. Luo State Key Laboratory of Tribology, Beijing, China Molecular Behaviour in Thin Film Lubrication

14:30 – 15:00 V. B. Niste, H. Tanaka, J. Sugimura Kyushu Univerity, Fukuoka, Japan The Effect of Temperature on ZDDP Tribofilms Efficient at Preventing Hydrogen Embrittlement

15:00 – 15:30 A. Gies, J. Karner, F. Seibert Oerlikon Surface Solution AG, Balzers, Liechtenstein J. Becker, T. Stelzig Oerlikon Balzers Coating Germany GmbH, Bingen, Germany Properties of DLC coatings in High Temperature Applications and Interactions with Lubricants


7

9 Jan 2018 Tuesday

Afternoon Room A-4

Session:

Gears (1)

Chair:

A. Kadiric Imperial College London, United Kingdom

14:00 – 14:30 F. Siglmüller Gear Research Centre (FZG), Technical University of Munich, Garching, Germany S. Kupfer, T. Lohner, K. Stahl TU München, Germany T. Kamps, G. Reinhart Fraunhofer Research Institution for Casting, Composite and Processing Technology IGCV, Augsburg, Germany Efficiency of Additive Manufactured Gears with Conformal Cooling

14:30 – 15:00 J. Brandão, J. Seabra INEGI, Porto, Portugal Measurement of Mild Wear in Gear Tests and Correlation with Tribological Parameters

15:00 – 15:30 M. Oehler, B. Magyar, B. Sauer University of Kaiserslautern, Germany Combination of Tribological and Thermal Simulation Using the Example of Worm Gear Drives


8

9 Jan 2018 Tuesday

Afternoon Room A-5

Session:

Roller Element Bearings

Chair:

T. Kiekbusch University of Kaiserslautern, Germany

14:00 – 14:30 H. Grillenberger Schaeffler Technologies AG & Co. KG, Herzogenaurach, Germany Normal Bearing Running Noise – Advanced Simulation and Prediction on Catalogue Level

14:30 – 15:00 N. Bader, H.C. Liu, G. Poll Leibniz Universität Hannover IMKT, Hannover, Germany A. Furtmann Siemens AG, Nürnberg, Germany Capacitance Measurement of Film Thickness in EHL Contacts

15:00 – 15:30 A. Clarke, S. Hutt, R. Pullin, A. Cockerill, P. Evans Cardiff University, Cardiff, United Kingdom Acoustic Emission as an Aid to Understanding of Lubricated Contacts in Tribological Systems


9

9 Jan 2018 Tuesday

Afternoon Room A-6

Session:

Polymers and Tribocontact (1)

Chair:

A. Elter Robert Bosch GmbH, Renningen, Germany

14:00 – 14:30 D. Nadermann, A. Elter, M. Ahmed, S. Solovyev, H. Schwarze Robert Bosch GmbH, Renningen, Germany Effect of Short Fiber Reinforced Polymers on the Flow Factor Calculation

14:30 – 15:00 J. Bai Cheng, B. Wetzel Institute for Composite Materials, Kaiserslautern, Germany Transfer Films in Plastic/ Metal Sliding: A Contribution towards Understanding their Formation Mechanisms

15:00 – 15:30 M. Fox, M. Priest, W. Hopkins University of Bradford, Bradford, United Kingdom C. Dyson Rocol Ltd, Leeds, United Kingdom Thin-F/Lubrication of PEK-Steel Sliding Contact at High Temperatures and Speeds


10

9 Jan 2018 Tuesday

Afternoon Room A-7

Session:

Metal Working Fluids (1)

Chair:

F. Passman Biodeterioration Control Associates, Inc., Princeton, USA

14:00 – 14:30 N. Webb, P. Brutto, B. Pyzowski, S. Kraszczyk Angus Chemical, Buffalo Grove, USA Influence of Neutralizer Chemistry on Lubrication of Water-Dilutable Metalworking Fluids

14:30 – 15:00 T. McClure SLC Testing Services Inc., Westlake, USA R. Stubbs Sea-Land Chemical Europe Ltd., Manchester, United Kingdom Using DOE with Twist Compression Tests (TCT) for Formulation of Metalworking Lubricants


11

9 Jan 2018 Tuesday

Afternoon Room A-8

Session:

Tribology of Machine Elements

Chair:

K. Topolovec Miklozic Powertrib Limited, Oxford, United Kingdom

14:00 – 14:30 K. Topolovec Miklozic Powertrib Limited, Oxford, United Kingdom Robustness of a Lubricating Film

14:30 – 15:00 M. Gleß, A. Schwarz Ingenieurbüro Gleß, Stuttgart, Germany Reliability of Concentrated Contacts due to a Synergetic Loop Between Experiment and Simulation

15:00 – 15:30 R. Liu Shanghai Jiaotong University, Shanghai, China Transient Tribological Performance of the Crankshaft-Main Bearings During Engines Start Operations


12

9 Jan 2018 Tuesday

Afternoon Room B-1

Session:

Base Oils (2)

Chair:

R. Zechel Klüber Lubrication München SE & Co. KG, München, Germany

16:00 – 16:30 D. Bulut, T. Seibel Leibniz University Hannover, Germany Radial Lip Seal Aging in Synthetic Oils

16:30 – 17:00 M. Greaves Dow Europe GmbH, Horgen, Switzerland Improving the Hydrolytic Stability of Natural & Synthetic Esters using Polyalkylene Glycols

17:00 – 17:30 T. Norrby, A.-L. Jonsson Nynas AB, Nynashamm, Sweden Antioxidant Response in Base Oils Blends – The Role of Secondary AO and Base Oil Sulfur

17:30 – 18:00 G. S. Dodos, F. Zannikos National Technical University of Athens, Greece / ELDON’S S.A. Lubricants, Greece Evaluation of the Oxidation Stability of Base Oils in the Rapid Small Scale Oxidation Test

18:00 Come Together with Snacks and Beverages

13

9 Jan 2018 Tuesday

Afternoon Room B-2

Session:

Engine Oils (2)

Chair:

L. Lindemann FUCHS PETROLUB SE, Mannheim,Germany

16:00 – 16:30 M. Offenbecher, R. Aufischer, G. Hager Miba Bearing Group, Laarkrichen, Austria Crank Train Optimization Based on Dimensioning and Surface Interaction with Oil / Oil Additives

16:30 – 17:00 F. DeBlase Lanxess Global Solutions US Inc., Naugatuck, USA Tribological Studies of Retention of Lubricant Friction Reduction for Extending Fuel Economy

17:00 – 17:30 Y. Moriizumi, K. Yamamoto ADEKA Corporation, Tokyo, Japan S. Heiden ADEKA Europe GmbH, Düsseldorf, Germany Fuel Economy Performance of MoDTC Friction Modifiers in EO under NEDC and WLTP Test Conditions

17:30 – 18:00 M. Seemann, T. Bartels, C. Meister Evonik Industries AG, Darmstadt, Germany G. Ruß Hochschule Darmstadt, Germany Engine Oil Pumpability in a Modern Engine


14

9 Jan 2018 Tuesday

Afternoon Room B-3

Session:

Ionic Liquids

Chair:

I. Mimami Luleå University of Technology, Luleå, Sweden

16:00 – 16:30 S. Plebst, T. J. S. Schubert, M. Ahrens, F.-M. Stiemke IOLITEC Ionic Liquids Technologies GmbH, Heilbronn, Germany Selected ILs and Nanomaterials as High Performance Additives for Lubricants & Neat Lubricants

16:30 – 17:00 H. Kondo, K. Hatsuda, P. Baghel, N. Tano Dexerials Corporation, Shimotsuke, Japan Newly Synthesized ILs Having a Long Alkyl Chain and their Friction Behaviors

17:00 – 17:30 E. Nyberg, I. Minami Luleå University of Technology, Luleå, Sweden Feasibility of Ionic Liquid Lubricant for Mars Mechanisms

17:30 – 18:00 A. Igartua, F. Pagano, E. Berriozabal, R. Bayon IK4-Tekniker, Eibar, Spain I. Minami Luleå University of Technology, Luleå, Sweden N. Dörr AC2T research GmbH, Wiener Neustadt, Austria Ionic Liquids for Space Applications


15

9 Jan 2018 Tuesday

Afternoon Room B-4

Session:

White Etching Cracks

Chair:

G. Poll Leibniz University Hannover, Germany

16:00 – 16:30 A. Kadiric Imperial College London, United Kingdom The Origins and Significance of White Etching Cracks

16:30 – 17:00 D. Cornel, F. Gutierrez Guzman, M. Oezel, G. Burghardt, G. Jacobs RWTH Aachen University, Aachen, Germany Formation of WECs under Shear and Rolling Loading and the Detection of Preliminary Stages

17:00 – 17:30 C. Mayer, B. Vengudusamy, A. Orendoz, S. Grundei, C. Enekes, R. Spallek Klüber Lubrication München SE & Co. KG, München, Germany Lubricant Influences on the Formation of White Etching Cracks (WEC)

17:30 – 18:00 M. Birjukovs, A. Jakovičs University of Latvia, Riga, Republic of Latvia W. Holweger Schaefler Technologies GmbH & Co. KG, Herzogenaurach, Germany Modelling of Thermal Stresses in Bearing Steel Structure Generated by Electrical Current Impulses


16

9 Jan 2018 Tuesday

Afternoon Room B-5

Session:

Roller Element Bearings (2)

Chair:

K. Bauckhage Bosch Rexroth AG, Elchingen, Germany

16:00 – 16:30 T. Kiekbusch, B. Sauer Technische Universität Kaiserslautern, Germany Detailed Calculation of Friction and Slip with MBS Models of Rolling Bearings

16:30 – 17:00 N. Nagler, K. Bauckhage Bosch Rexroth AG, Elchingen, Germany Interaction of Bearing Surface Finish and Bearing Performance under Mixed Friction Conditions

17:00 – 17:30 R. Böttcher, G. Poll Leibniz Universität Hannover, Germany Radially Preloaded Cylindrical Roller Bearings – Optimized Preload and Operating Performance

17:30 – 18:00 J. Li Xi'an Technological University, Xi'an, China Thermal Characteristics of High Speed Roller Bearing with Considering the Slip in Contact Region


17

9 Jan 2018 Tuesday

Afternoon Room B-6

Session:

Polymers and Tribocontact (2)

Chair:

C. Pastor Robert Bosch GmbH, Renningen, Germany

16:00 – 16:30 T. Gradt, G. Theiler Federal Institute for Materials Research and Testing (BAM), Berlin, Germany Tribological Properties of Polymer Composites for Applications in LNG Environment

16:30 – 17:00 S. Klien, J. Voyer, F. Ausserer, A. Diem V-Research GmbH, Dornbirn, Austria Lubricated Polymer Friction on Rough Surfaces

17:00 – 17:30 G. Theiler, T. Gradt Federal Institute for Materials Research and Testing (BAM), Berlin, Germany Friction and Wear Characteristics of Polymers in Gaseous and Liquid Hydrogen

17:30 – 18:00 P. Olaru SETEC, Bucharest, Romania Frictional Nanosoldering Sheets of Pseudocomposite for Reducing Surface Roughness in Electrical


18

9 Jan 2018 Tuesday

Afternoon Room B-7

Session:

Metalworking Fluids (2)

Chair:

K. Terveen Hermann Bantleon GmbH, Ulm, Germany

16:00 – 16:30 T. Norrby, L. Malm, P. Wedin, G. Ponti Nynas AB, Nynashamm, Sweden Emulsion Stability in Semi-Synthetic MWF Formulations

16:30 – 17:00 K. Wirz Evonik Nutrition & Care GmbH, Essen, Germany Versatile Synthetic Oils and Defoamers as Performance Boosters for Processing Lubricants like Metal Working Fluids

17:00 – 17:30 N. El Mehbad Najran University, Najran, Kingdom of Saudi Arabia Study of a New Additive Prepared by Phase Transfer Catalysts as Antioxidant

17:30 – 18:00 I. Dangleterre, P. Lohmann Hermann Bantleon GmbH, Ulm, Germany Cooling Lubricant Technology 4.0 – First Field Experience


19

9 Jan 2018 Tuesday

Afternoon Room B-8

Session:

Test Methods (1)

Chair:

M. Grebe Hochschule Mannheim, Germany

16:00 – 16:30 A. Schneider, G. Patzer, F. Welz Opimol Instruments Prüftechnik GmbH, München, Germany A Novel Screening Method for Tribological Properties of High Performance Greases

16:30 – 17:00 K. Topolovec Miklozic Powertrib Limited, Oxford, United Kingdom Performance Screening of Wind Turbine Gear Oils for Improved Reliability of Wind Turbines

17:00 – 17:30 D. Bijani, M. B. de Rooij, D. J. Schipper Univeristy of Twente, Enschede, The Netherlands E. L. Deladi Bosch Transmission Technology, Tilburg, The Netherlands The Influence of Surface Texturing and Boundary slip on the Film Thickness in Parallel Sliding Surfaces

17:30 – 18:00 F. Tasche, H. Pasligh, F. Dinkelacker, C. Schmidt, B. Denkena Leibniz Universität Hannover, Germany Tribological Influence of Machined Micro Dimples in Cylinder Liners on Heavy Duty Diesel Engines


20

10 Jan 2018 Wednesday

Morning Room 1 P-2

Session:

Plenary Session (2)

Chair:

M. Jungk MJ Tribology, Geisenheim, Germany

09:00 – 09:30 M. Moseler Fraunhofer Institute for Mechanics of Materials (IWM), Freiburg, Germany Potentials, Perspectives and Limitations of Atomistic Tribosimulation

09:30 – 10:00 N. Espallargas Norwegian University of Science and Technology (NTNU), Trondheim, Norway Surface Effects on Friction and Wear of Stainless Steels Exposed to Fatigue, Corrosive and Lubricated Environment

10:00 – 10:30 J. Dench, J. Wong Imperial College London, United Kingdom Anomalous Lubricant Flow in Elastohydrodynamic Contacts


21


Morning Room C-1

Session:

Bio Lubricants (1)

Chair:

R. Luther Fuchs Schmierstoffe GmbH, Mannheim, Germany

11:00 – 11:30 G. Kraft, R. Luther, A. Robben Fuchs Schmierstoffe GmbH, Mannheim, Germany Unconventional Raw Materials as Sources for Bio-Lubricants

11:30 – 12:00 L. Labanauskas, K. Petrauskas, S. Asadauskas FTMC, Vilnius, Lithuania Suitability of Mono-Unsaturated Esters for High Performance Hydraulic Fluids

12:00 – 12:30 N. Zulkifli, N. A. Mohd Zainal University of Malaya, Kuala Lumpur, Malaysia Polyol Ester-Based Biolubricants – Their Tribological Properties


22


Morning Room C-2

Session:

Engine Oils (3)

Chair:

C. Warrens BP, Reading, United Kingdom

11:00 – 11:30 F. Alemanno, A. M. Tortora, D. Veeregowda Ducom Instruments Europe B.V., Groningen, The Netherlands Investigating Lubrication by Engine Oils Using Stribeck Curve and Ultra-Low Wear Test Method

11:30 – 12:00 M. Frauscher, A. Ristic, C. Besser, N. Dörr AC2T research GmbH, Wiener Neustadt, Austria Correlation of Engine Oil Degradation Products with Friction and Wear Properties

12:00 – 12:30 K. Simonovic, M. Kalin University of Ljubljana, Ljubljana, Slovenia Assessment of the Automotive Lubricant Performance in the Boundary Lubrication Regime

12:30 – 14:00 Break – Exhibition and Poster Session

23


Morning Room C-3

Session:

Greases (1)

Chair:

T. Norrby Nynas AB, Nynashamm, Sweden

11:00 – 11:30 C. Specht Schaeffler Technologies AG & Co. KG, Schweinfurt, Germany Rolling Bearing Greases for Enhanced Demands in Todays and Future Automotive Applications

11:30 – 12:00 T. Langlais, S. Springer Ergon, Jackson, USA The Effect of Base Oils on Thickening and Physical Properties of Lubricating Greases

12:00 – 12:30 M. Fathi-Najafi Nynas AB, Nynäshamm, Sweden How to Optimize the Performance of Lubricating Greases by Selecting Suitable Base Oil Blends


24


Morning Room C-4

Session:

EHL-Contacts

Chair:

D. Bartel Otto-von-Guericke-Universität Magdeburg, Germany

11:00 – 11:30 R. Beilicke Otto-von-Guericke-Universität, Magdeburg, Germany Investigation of Power Loss and Contact Conditions of a DLC Coated Helical Gear Pair Considering Limiting Shear Stress Behavior of the Lubricant

11:30 – 12:00 S. Thielen, B. Magyar, F. Flavien, B. Sauer University of Kaiserslautern, Germany EHL Simulation of the Radial Shaft Sealing System

12:00 – 12:30 T. Zapletal, P. Sperka, I. Krupka, M. Hartl Brno University of Technology, Brno, Czech Republic Film Thickness and Friction on a Border of Mixed EHL Contact


25


Morning Room C-5

Session:

Test Methods (2)

Chair:

E. Georgiou Falex, Rotselaar, Belgium

11:00 – 11:30 F. Rummel, X. Wittmann, Anton Paar Germany GmbH, Ostfildern, Germany K. S. Pondicherry Anton Paar GmbH, Graz, Austria Combining Rheological and Tribological Studies of Lubricants

11:30 – 12:00 P. Sperka, I. Krupka, M. Hartl Brno University of Technology, Brno, Czech Republic Optical Observation of Lubricating Film in Textured Journal Bearings

12:00 – 12:30 A. Friedl, G. Poll Leibniz University Hannover, Germany Investigation of the Lubricant Distribution in a High-Speed Gearbox


26


Morning Room C-6

Session:

Polymers

Chair:

T. Gradt Federal Institute for Materials Research and Testing (BAM), Berlin, Germany

11:00 – 11:30 D. Paulkowski, J. Seven Fraunhofer IFAM, Bremen, Gremany Deformation Behaviour of Microstructured Elastomers

11:30 – 12:00 A. Adam, D. Paulkowski Fraunhofer IFAM, Bremen, Germany Adhesion Reduction of Elastomers with Plasmapolymeric Coatings

12:00 – 12:30 J. Voyer , F. Ausserer, S. Klien, I Velkavrh, A. Diem V-Research GmbH, Dornbirn, Austria Effect of Contact Area Reduction by Surface Laser Structuring on Adhesive Friction of Elastomers


27


Morning Room C-7

Session:


Chair:

K. Terveen Hermann Bantleon GmbH, Ulm, Germany

11:00 – 11:30 E. Galgoci Munzing NA LP, Bloomfield, USA Filtration and Defoamer Performance in Aqueous Metalworking Fluids

11:30 – 12:00 M. van Breemen, R. Evans Quaker Chemical BV, Uithoorn, The Netherlands Machining of Bi-Metal (Cast Aluminum-Ferrous Metal) Components

12:00 – 12:30 C. Hedoire Solvay, Aubervilliers, France Metal Cleaning: How to Select Cleaning Solutions for MWF and Rust Preventives ?


28


Morning Room C-8

Session:

Moleculardynamics

Chair:

M. Moseler Fraunhofer Institute for Mechanics of Materials (IWM), Freiburg, Germany

11:00 – 11:30 J. Ewen, H. Spikes, D. Dini Imperial College London, United Kingdom Effect of Confined Fluid Molecular Structure on Nonequilibrium Phase Behavior and Friction

11:30 – 12:00 K. Falk, D. Savio, M. Moseler Fraunhofer Institute for Mechanics of Materials (IWM), Germany Viscosity of Hydrocarbon Lubricants Under Extreme Pressures

12:00 – 12:30 U. Cihak-Bayr, S. J. Eder, C. Gachot AC2T research GmbH, Austria Molecular Dynamics Simulation as a Tool in Materials Tribology – Nanoabrasion & Nanosliding


29


Afternoon Room D-1

Session:

Bio Lubricants (2)

Chair:


14:00 – 14:30 I. Minami, B. K. Sundararajan, M. Björling Luleå University of Technology, Luleå, Sweden Environmentally Acceptable Lubricants for Marine Applications

14:30 – 15:00 E. Tsesmeli, G. S. Dodos, F. Zannikos National Technical University of Athens, Zografos, Athens, Greece A Study on the Microbial Stability of Biobased Lubricants

15:00 – 15:30 A. Grigoriev, I. Kavaliova, N. Myshkin Metal-Polymer Resaerch Institute, Gomel, Belarus Degradation of Vegetable Oils at Boundary Friction


30


Afternoon Room D-2

Session:

Engine Tribology (1)

Chair:

M. Fox University of Bradford, United Kingdom

14:00 – 14:30 A. Boucke, G. Knoll, S. Umbach IST GmbH, Aachen, Germany S. Reichl BMW Steyr, Steyr, Österreich Wear Simulation of Conrod Bearings Considering Thermo-Elasto-Hydrodynamic Effects – Influence of Modelling Depth on Result Quality

14:30 – 15:00 I. Robolas, P. Nikolakopoulos University of Patras, Patras, Greece CFD Simulation of a Floating Ring Bearing and Ring Equilibrium Investigation

15:00 – 15:30 M. Nejadhamzeeigilani, A. Neville, A. Morina, S. Kosarieh Univesity of Leeds, United Kingdom Q. Zhou Changan UK R&D Centre Ltd, Birmingham, United Kingdom Gasoline Contamination in Engine Oil: Does it affect Tribology?


31


Afternoon Room D-3

Session:

Greases (2)

Chair:

S. Beyer-Faiss Dr. Tillwich GmbH Werner Stehr, Horb, Germany

14:00 – 14:30 M. Suzuki, T. Sasaki, Y. Takeichi Toyohashi University of Technology, Toyohashi, Japan Morita, R., Arakawa, K. Somic Ishikwa Inc., Hamamatsu. Japan Grease Lubrication Properties in Reciprocating Sliding for Textured Surfaces of POM

14:30 – 15:00 M. Fathi-Najafi Nynas AB, Nynäshamm, Sweden The Impact of the Naphthenic Oils on the Characteristics of the Conventional Lithium and Lithium Complex Greases

15:00 – 15:30 R. Westbroek, J. Leckner Axel Christiernsson International AB, Nol, Sweden Polypropylene – a Grease Thickener Technology for Energy Efficient Lubrication


32


Afternoon Room D-4

Session:

Rough Surfaces Contact Mechanics

Chair:

J. Müllers Robert Bosch GmbH, Renningen, Germany

14:00 – 14:30 N. Myshkin, A. Grigoriev Belarus National Academy of Sciences, Gomel, Belarus Scale and Spatial Factors in Tribology

14:30 – 15:00 G. Vorlaufer, A. Vernes, F. Franek AC2T research GmbH, Wiener Neustadt, Austria A Semi-Deterministic Model for the Contact Mechanics of Rough Surfaces

15:00 – 15:30 F. Stolz, P. Gumbsch, C. Greiner Karlsruhe Institute for Technology (KIT), Germany G. Richter Max Planck Institute for Intelligent Systems, Stuttgart, Germany Microstructural Changes in Copper under Tribological Loading as a Function of Hertzian Pressure


33


Afternoon Room D-5

Session:

Test Methods (1)

Chair:

A. Pauschitz AC2T research GmbH, Wiener Neustadt, Austria

14:00 – 14:30 T. Kamps, J. Walker, R. Wood, University of Southampton, United Kingdom P. Lee, South West Institute, San Antonio, USA G. Plint Phoenix Tribology Ltd, Kingsclere, United Kingdom Flake and Nodular Graphite Cast Iron Scuffing Mechanisms in a Lubricated Reciprocating Contact

14:30 – 15:00 J. Edtmayer, S. Walch, H. Hick TU Graz, Austria T. Wopleka,M. Jech AC2T research GmbH, Wiener Neustadt, Austria S. Lösch AVL List GmbH, Graz, Austria Combined Friction and Wear Analysis on Single Cylinder Test Engine

15:00 – 15:30 J. Rigo, P. Kovačócy Slovak University of Technology in Bratislava, Trnava, Slovak Republic Comparison of Tribological Test Rig Results Using Standardized and Diversified Test Methods


34


Afternoon Room D-6

Session:

Polymer Gears (1)

Chair:

J. Seabra INEGI, Porto, Portugal

14:00 – 14:30 B. Wetzel, Institut für Verbundwerkstoffe GmbH, Kaiserslautern, Germany E. Padenko Universität Kaisersdlautern, Germany Polybenzimidazole High Temperature Resistant Polymer for Severe Tribological Applications

14:30 – 15:00 A. Bormuth, J. Zuleeg, C. Schmitz, M. Pfadt, H. Meven Klüber Lubrication München SE & Co. KG, München, Germany Lubrication of Plastic Worm Gears

15:00 – 15:30 C. Fernandes, D. Rocha, R. Martins, L. Magalhães, J. Seabra INEGI, Porto, Portugal FEM Model to Predict Bulk Temperature on Polymer Gears


35


Afternoon Room D-7

Session:


Chair:

C. Busch Westsächsische Hochschule Zwickau, Germany

14:00 – 14:30 F. Passman Biodeterioration Control Associates, Inc., Princeton, USA Metalworking Fluid Microbiology Basics Revisted

14:30 – 15:00 M. Bellini Bellini spa, Zanica, Italy Chemiometric Approach in Developing New Biostable Water Soluble MWFs

15:00 – 15:30 V. Aruta temixOleo, Mailand, Italy TemixOleo Sustainable and Renewable Bio-refinery: Bio-base Stocks in Metalworking Applications


36


Afternoon Room D-8

Session:

Gas Bearings

Chair:

M. Mayer Robert Bosch GmbH, Renningen, Germany

14:00 – 14:30 F. Al-Bender, M. Nabuurs, D. Reynaerts Katholieke Universiteit Leuven, Belgium Fabrication and Validation of a Flexible Tilting Pad Gas Bearing for High Speed Turbo Machinery

14:30 – 15:00 M. Nabuurs, F. Al-Bender, D. Reynaerts Katholieke Universiteit Leuven, Belgium On the Dynamic Stability of Flexible Tilting Pad Gas Bearings

15:00 – 15:30 M. Mahner, A. Lehn, M. Bauer, B. Schweizer Technical University Darmstadt, Germany Numerical and Experimental Investigations of Air Foil Journal and Thrust Bearings


37


Afternoon Room E-1

Session:

Bio Lubricants (3)

Chair:


16:00 – 16:30 D. Karonis, G. S. Dodos. E. Manitara National Technical University of Athens, Zografos, Athens, Greece valuation of Hydrotreated Vacuum Gasoil and Hydrocracker Residue for Base Oils Production

16:30 – 17:00 R. Franz, B. Stojanovic, A. Grafl AC2t research GmbH, Wiener Neustadt, Austria K. Adam, B. Pertl Voestalpine Stahl GmbH, Linz, Austria Application-Oriented Oil Selection for Gas Holders – a Lab-to-Field Approach

17:15 Departure for Esslingen (Conference Dinner)

17:30 Bionic Performance, Festo AG & Co. KG

19:00 Conference Dinner

38


Afternoon Room E-2

Session:


Chair:


16:00 – 16:30 G.Miiller, M. Manning, C. Williams, J. Evans, T. Selby Savant Laboratories, Midland, USA Development of an Updated Turbocharger Bench Test

16:30 – 17:00 C. Fang, X. Meng, Xie, Y. Shanghai Jiaotong University, China A New Technique for Measuring Friction of SI Engine Piston-Asssembly




39


Afternoon Room E-3

Session:

Greases (3)

Chair:

C. Specht Schaeffler Technologies AG & Co. KG, Schweinfurt, Germany

16:00 – 16:30 F. Alemanno, D. Veeregowda Ducom Instruments Europe B.V., Groningen, The Netherlands Friction and Wear Behavior of Greases and the Role of Surface Adhesion Force

16:30 – 17:00 D. Gonçalves, B. Graça, G. Herve, J.-L. Mansoux, J. Seabra INEGI, Porto, Portugal Tribological Study of Greases for Aeronautical Applications




40


Afternoon Room E-4

Session:

Surface Phenomena

Chair:

J. Müllers Robert Bosch GmbH, Stuttgart, Germany

16:00 – 16:30 K. Matsumoto Honda R&D, Haga-Machi, Japan Surface Damage under Tribological Conditions Induced by Electrical Discharge

16:30 – 17:00 A. Stratmann, J. Maneke, G. Jacobs RWTH Aachen Univeristy, Germany Correlation of Tribofilm Formation in Rolling Bearings and Tribometers




41


Afternoon Room E-5

Session:

Test Methods (2)

Chair:

A. Pauschitz AC2T research GmbH, Wiener Neustadt, Austria

16:00 – 16:30 S. Bill REWITEC GmbH, Lahnau, Germany Efficiency and Emissions Optimization of Combustion Engines by Silicon Coating

16:30 – 17:00 A. Schumann, S. Weise TriboPlast GmbH, Chemnitz, Germany Oscillating Tribology Test Bench for the Testing of Thermoplastic Friction Pairings




42


Afternoon Room E-6

Session:

Fundamentals of Tribology

Chair:

A. Fischer University of Duisburg-Essen, Germany

16:00 – 16:30 B. Zhmud Applied Nano Surfaces Sweden AB, Uppsala, Sweden A. Storz Applied Nano Surfaces GmbH, Erkrath, Germany Mechanochemical Surface Finishing: The Rehbinder Effect in Action

16:30 – 17:00 S. Fedorov Kaliningrad State Technical University, Kaliningrad, Russia Energy and Entropy Analysis of Machine as Supertribosystem




43

11 Jan 2018 Thursday

Morning Room 1 P-3

Session:

Plenary Session (3)

Chair:

C. Wincierz Evonik Industries AG, Darmstadt, Germany

09:00 – 09:30 A. Fischer, P. Stemmer, D. Stickel University of Duisburg-Essen, Duisburg, Germany The Partition of Friction and Wear at Ultra-Mild Sliding Wear under Boundary Lubrication

09:30 – 10:00 J. Seabra, B. Graça, C. Fernandes, D. Gonçalves, J. Brandão, P. Marques, R. Martins INEGI, Porto, Portugal GEAR LUBRICATION: Testing, Friction and Efficiency of Wind Turbine and Automotive Gearboxes

10:00 – 10:30 M. Pfadt, M. Wiesböck, S. El Allam, M. Kuhn Klüber Lubrication München SE & Co. KG, München, Germany Hydro Lubrication: The Future of Lubricants is Based on Water


44


Morning Room F-1

Session:

Additives (1)

Chair:

M. Fathi-Najafi Naphtenics Tech DMS, Nynäshamm, Sweden

11:00 – 11:30 M. Fazakerley, D. Gillespie Croda, Goole, United Kingdom Friction and Wear Performance of Novel Organic Fricion Modifiers of DLC Surfaces

11:30 – 12:00 D. Gillespie Croda, Goole, United Kingdom The Influence of Friction Modifiers in Fully Formulated Motorcycle Oils

12:00 – 12:30 M. Rodriguez Ripoll, V. Totolin AC2T research GmbH, Wiener Neustadt, Austria A. Tomala ITEE, Institute for sustainable technologies, Radom, Poland M. Remskar Institute Jozef Stefan, Ljubljana, Slovenia Interaction Between MoS2 Nanotubes and Additives in Model Oils: Application to Thread Forming


45


Morning Room F-2

Session:


Chair:


11:00 – 11:30 J. Walker, T. Kamps, J. Mitchell-Smith, J. Lam, A. Clare University of Southampton, United Kingdom Friction and Wear Behaviour of a Textured Al-Si Cylinder Liner for Automotive Applications

11:30 – 12:00 P. Dellis ASPETE, Athens, Greece Friction in a Test Rig and the Effect of Cavitation on Ring Load Capacity and Pressure Profile

12:00 – 12:30 P. Mishra IIT Madras, Chennai, India Improving Tribological Performace of PRCL System Using Micro Dimples


46


Morning Room F-3

Session:

Condition Monitoring

Chair:

R. Krethe Oelcheck GmbH, Brannenburg, Germany

11:00 – 11:30 S. Bots Oelcheck GmbH, Brannenburg, Germany Handling of Oil Analysis Data – Opportunities and Challenges of Big Data and Industry 4.0

11:30 – 12:00 C. Heine Oelcheck GmbH, Brannenburg, Germany Oil Monitoring of Natural Gas Engines Considering the Possibility of Bio Methane

12:00 – 12:30


47


Morning Room F-4

Session:

Gearbox

Chair:

J. Seabra INEGI, Porto, Portuga

11:00 – 11:30 T. Lohner, K. Stahl Technical University Munich, Germany M. Hinterstoißer Technical University Munich (formarly), München, Germany Minimising Load-Dependent Gear Losses

11:30 – 12:00 C. Mielke, O. Herz Merkle & Partner GbR, Heidenheim, Germany Simulation of the Gear Oil Distribution in a 7-Speed Transmission

12:00 – 12:30 P. Marques, R. Martins, J. Seabra INEGI, Porto, Portugal Constant Mesh Stiffness Gears for Smooth Operation


48


Morning Room F-5

Session:

Tribological Testing

Chair:

M. Jungk MJ Tribology, Geisenheim, Germany

11:00 – 11:30 A. Frick, V. Muralidharan Aalen University, Germany Investigation of the Dynamic Tribological Contact Behavior of Polymeric Materials

11:30 – 12:00 S. Abdel-Wahed, C. Koplin, R. Jäger, M. Scherge Fraunhofer Institute for Mechanics of Materials (IWM), Freiburg, Germany On the Transition from Static to Dynamic Boundary Friction Studied by Oscillatory Tribometry

12:00 – 12:30 S. Beyer-Faiss Dr. Tillwich GmbH Werner Stehr, Horb, Germany Determination of Adhesive Properties of Lubricants on Surfaces


49


Morning Room F-6

Session:

Materials

Chair:

D. Paulkowski Fraunhofer IFAM, Bremen, Germany

11:00 – 11:30 T. Coors, F. Pape, G. Poll Leibniz Universität Hannover, Germany Enhancing Machine Elements by Residual Stresses, Optimized Surfaces and Tailored Forming

11:30 – 12:00 P. Schreiber, J. Schneider, C. Bucharsky, G. Schell, M. Hoffmann Karlsruhe Institue of Technology, Karlsruhe, Germany Tribology of Laser Textured Si-Ceramics Regarding the Use in High Pressure Pumps for GDI-Motors


50


Morning Room F-7

Session:

Coatings (1)

Chair:

A. Gies Oerlikon Surface Solution AG, Balzers, Liechtenstein

11:00 – 11:30 V. Weihnacht, S. Makowski, A. Leson Fraunhofer IWS, Dresden, Germany The Role of Water on Friction and Wear of Hard Amorphous Carbon Coatings

11:30 – 12:00 R. Montelimard Hef Durferrit, Andrezieux Boutheon, France The latest PVD Coatings and Investigations on Piston Pins for Internal Combustion Engines

12:00 – 12:30 H. Yuan, J. Song, V. Schinow Ostwestfalen-Lippe University of Applied Sciences, Lemgo, Germany Comparison of the Wear Performance of Gold Coatings with and without Nickel Underlayer


51


Afternoon Room G-1

Session:

Additives (2)

Chair:

C. Wincierz Evonik Industries AG, Darmstadt, Germany

14:00 – 14:30 K. Komori, G. Fujimoto, T. Tsukamoto Honda R&D Co., Ltd., Tochigi, Japan Tribological Approach to Friction Reduction of Magneto-Rheological Shock Absorber Unit

14:30 – 15:00 M. Ratoi, L. Lokuwithana University of Southampton, Southampton, United Kingdom Smart Electromagnetically Responsive Nanoadditized Lubricants

15:00 – 15:30 P. Pyka Keim Additec Surface GmbH, Kirchberg, Germany Wax as Additives in Lubricants

15:30 – 16:00 V. Koch, J. Kopp Robert Bosch GmbH, Stuttgart, Germany D. Bartel Otto-von-Guericke-Universität, Magedeburg, Germany Tribooxides in Steel-Diesel-Contact – How do they Influence Wear?

16:00 – 16:15 Short Break

52


Afternoon Room G-2

Session:

Axle Fluids and Hydraulic

Chair:

M. Alibert Evonik Resource Efficiency GmbH, Darmstadt, Germany

14:00 – 14:30 R. C. Martins, J. Seabra, C. M. C. G. Fernandes, M. Hammami INEGI, Porto, Portugal Axle Gear Oils: Friction under Full, Mixed and Boundary-Film Lubrication Regimes

14:30 – 15:00 D. Shakhvorostov, R. Kolb Evonik Oil Additives GmbH, Darmstadt, Germany Theory and Reality of Efficiency Improvements with Hydraulic Fluids

15:00 – 15:30 S. Asadauskas, A. Strakšys, D. Bražinskienė FTMC, Vilnius, Lithuania Long-term Degradation of Thin Films of Engine Oils and Hydraulic Fluids

15:30 – 16:00 L. Mirci, L. Bogatu University Politehnica Timisoara, Romania Synthetic Complex Malonic Esters as Eco-Friendly Lubricants


53


Afternoon Room G-3

Session:

Condition Techniques

Chair:

R. Krethe Oelcheck GmbH, Brannenburg, Germany

14:00 – 14:30 T. Woldert, C. Martin, P. Koldehoff Visiolytics, Hamburg, Germany Machine Vision as a Measurement Procedure for Condition-Monitoring

14:30 – 15:00 S. Eiden, S. Feldhoff Oel-Waerme-Institut gGmbH, Herzogenrath, Germany C. Müller Hochschule Mannheim, Germany Development of Fast Screening Method of Greases Based onDifferent Chemical Analysis via Determination of ReactionKinetic


54


Afternoon Room G-4

Session:

Journal Bearings

Chair:

N. Nagler Bosch Rexroth AG, Elchingen, Germany

14:00 – 14:30 C. Greiner Karlsruhe Institue of Technology, Karlsruhe, Germany Laser Surface Texturing: Bio-Inspired Scale-Like Surfaces and their Tribological Properties

14:30 – 15:00 A. Burya, Y Yeriomina Dnipovsk State Technical University, Kamyanske, Ukraine S. Amelina National Universioty of Life and Environmental Science of Ukraine, Kiev Study of Wear Resitance of Metal-Containing Polymers based on Aromatic Polyamide

15:00 – 15:30 A. Burya, O. Naberezhna Dnipovsk State Technical University, Kamyanske, Ukraine S. Amelina National Universioty of Life and Environmental Science of Ukraine, Kiev Research of Tribological Characteristics of Self-Reinforced Organoplastics based on Phenylon


55


Afternoon Room G-5

Session:

Coating Testing

Chair:

V. Weihnacht Fraunhofer IWS, Dresden, German

14:00 – 14:30 E. Georgiou, D. Drees, H. van Hest Falex, Rotselaar, Belgium G. Timmermans Tennesco, Slint-Truiden, Belgium Replacing Hard Chromium in Industrial and Automotive Applications by Sound Tribological Approach

14:30 – 15:00 R. Bajwa, M. Anand, I. Tudela, R. Verbickas, Y. Zhang Daido Metal Co. Ltd, The European Technical Centre (UK), Ilminster, United Kingdom Friction and Wear Evaluation of Lead-Free Tin Based Coatings Using Ball-On-Disc Tribotester

15:00 – 15:30 M. Hadad Nova Werke AG, Effretikon, Switzerland The Challenge of the Erosive Wear Evaluation of Thermally Sprayed Coatings

15:30 – 16:00 K. Basit National University of Sciences and Technology (NUST), Islamabad, Pakistan H. Shams DHA Suffa University (DSU), Karachi, Pakistan M. A. Khan Cranfield University, Cranfield, United Kingdom S. Saleem NUST, Islamabad, Pakistan Scratch Testing to Determine Abrasion Resistance in Commercial Oleophobic Coatings using Non-Contact Technique for Aerospace Applications


56


Afternoon Room G-6

Session:

Materials and Solid Lubricants

Chair:

N. Nagler Bosch Rexroth AG, Elchingen, Germany

14:00 – 14:30 A. Merstallinger Aerospace & Advanced Composites GmbH, Wiener Neustadt, Austria Lubrication in Space is Solid

14:30 – 15:00 S. Poersch, J. Bai-Cheng, B. Sauer, B. Wetzel University of Kaiserslautern, Germany S. Emrich, M. Kopnarski Institute for Surface and Thin Film Analysis GmbH, Kaiserslautern Friction and Wear Mechanism of Materials for Solid Lubricated Rolling Bearings

15:00 – 15:30 Y. Takeichi, K. Mishima, Y. Sugawara, A. Kubota Toyohashi University of Technology, Toyohashi, Japan T. Inoue, K. Asai Asahi Yukizai Corpoaration, Tokyo, Japan Improvement of Wear Resistance of Phenolic Resin Composite by Boric Acid Addition

15:30 – 16:00 R. Narasimha Rao, S. C. Chadalawada National Institute of Technology, Warangal, India Tribological Behaviour of Aluminium Syntactic Foams under Dry and Lubricated Conditions


57


Afternoon Room G-7

Session:

Coatings (2)

Chair:

M. Woydt BAM Federal Institute for Material Research and Testing, Berlin, Germany

14:00 – 14:30 M. Woydt, R. Wäsche, R. Ehrke, G. Brandt BAM Federal Institute for Material Research and Testing, Berlin, Germany S. Sasaki, S. Yano Tokyo University of Science, Tokyo, Japan Tribology in Hot Steam for Energy Recovery

14:30 – 15:00 F. Seibert, J. Ramm, B. Widrig Oerlikon Surface Solutions AG, Balzers, Liechtenstein C. Bohnheio, P. Ernst, P. Luethy Oerlicon Metco AG, Wohlen, Switzerland Optimization of the Tribological Contact between Piston Ring and Liner using Oxide Coatings

15:00 – 15:30 G. Mishev, C. Pashinski, L. Kolaklieva Technical University Sofia, Branch Plovdiv, Plovdiv, Bulgaria V. Rupetsov Paisii Hilendaski University of Plovdiv, Smolyn, Bulgaria S. Dishliev University of Food Technologies, Plovdiv, Bulgaria M. Angelov Milko Angelov Consulting Co., Plovdiv, Bulgaria Tribomechanical Study of a Ti/TiN/TiCrCN/(CrCN/TiCN)n Coating Deposited on WC-Co Alloy

15:30 – 16:00 J. Ahmed, M. Ghulam, M. Ghufran, M. Jawad, N. Hayat UET Lahore, Lahore, Pakistan M. Irfan Pitmaem Pcsir Labs, Lahore, Pakistan Investigation of Low Temperature PVD Based TiN Coatings for Diesel Engine PRCL Interface


58


Afternoon Room 1 P-4

Session:

Plenary (4)

Chair:

T. Gradt BAM Federal Institute for Material Research and Testing, Berlin, Germany

16:15 – 16:45 T. Brandenburg BGR, Berlin, Germany Skyrocketing E-Mobility – Challenge for the Supply of Raw Materials?

16:45 – 17:00 M. Bäse Magna Powertrain GmbH & Co. KG, Lannach, Austria R. Drafz KS Gleitlager GmbH, Leon-Rot, Germany H. Buse University of Applied Sciences Mannheim, Germany J. T. Terwey Leibniz Universität Hannover, Germany F. Rummel Anton Paar Germany GmbH, Ostfildern, Germany How Tribology grows - Activities of the German Young Tribologists

17:00 Farewell Party

59

9 jan 2018 tuesday morning p-1 chair · 9 jan 2018 tuesday morning room 1 p-1 session: opening and...

Documents