8_industrial lunar - marketing ppt

Industrial LuNAR

*Industrial LuNARMarketing Presentation

MenuGeneral OverviewKey FeaturesSuperior CoverageRemote Control & DiagnosticsUnrivalled Catch PerformanceApplicationsTechnical SpecificationsSummary


OverviewIndustrial LuNAR is a commercial & industrial High-Ceiling Dual Technology detector with 3 PIR channels and a MW channel Mounting height is up to 8.6m (28ft)Incorporates Rokonets Anti-Cloak Technology & Intelligent Digital Signal ProcessingHas novel remote control & diagnostic capabilities Industrial LuNAR is a great solution for Industrial and commercial installations better compared to any other wall-mount or ceiling-mount detector


Key Features of Industrial LuNARSuperior CoverageExtremely fast detectionBetter and more secure coverage than wall-mount detectorsCustomized coverageRemote Control & DiagnosticsBi-direction remote controlProSYS upload/download or keypadUnrivalled Catch PerformanceAnti-Cloak Technology (ACT)Intelligent Digital Signal Processing


Fast Detection18m diameter coverage installed between 3.7 to 8.6mThe coverage pattern is divided into 3 lens sections each covering 120 angle, so the beam pattern is very dense providing EXTREMELY FAST DETECTION with no dead areasThe detection is faster compared to industrial wall-mount detectors with a similar range that have one lens


More Secure than Wall-Mounts Shelves or equipment more easily block a wall-mount, especially after an internal rearrangement in warehouses or retail stores Its easy to sabotage or mask a wall-detector mounted at 3-4 m high


More Secure than Wall-MountsHigh-Ceiling mount detectors provide better coverage:It is impossible to block high ceiling mount detectors even by stockpiling cartons up to 7-8mIt is almost impossible to sabotage or mask a high ceiling mount detector.


Customized Coverage Protect multi-level areas: shopping malls together with second-floor loft

Each of the 3 lens sections are independently adjustable Lens facing the loft is adjusted for height from loft to ceiling Other lenses are adjusted for height from ground floor to ceiling


Remote Control & Diagnostics Easy testing and adjusting of the detector after installation, without climbing ladders Via one of two methods:Using the unique bi-directional infrared remote controlLCD keypad or Upload/Download software when installed on the ProSYS bus


Remote Control & Adjustment Capabilities Adjust MW coverage via a remote control while walk testing the detector, without climbing laddersAdjust the detection sensitivity by turning ACT ON/OFFTurn ON/OFF the LEDs. For higher security turn off the LEDs after walk-test via remote control


U/D Remote Control Screen Addressable detector on the ProSYS RS485 bus

Industrial LuNAR control screen from Upload/Download


Remote Diagnostic Capabilities Remote measuring of input voltage to the detectorRemote measuring of signal and noise level on each of the 3 PIR sensors, and of the MW channel


Performing Remote MeasurementsThe signal & noise limitations are: PIR signal level should be 1.2-2.8 voltPIR noise level should be 0-0.6 volt MW signal level should be 1.2-2.8 voltMW noise level should be 0-2 volt

Measurement should be performed while there is no movement in the protected area


Catch Performance Industrial LuNAR has superior catch performance due to: Anti-Cloak Technology which overcomes high temperatures and cloaking by switching to MW only mode Intelligent Digital Signal Processing adjusts the alarm threshold according to the intruder crossing speed of the PIR beams, for better detection AND higher false alarm immunity


Anti-Cloak Technology

ACT is a patent pending technology for DT detectors, that overcomes PIR weaknesses:High Temperatures: No IR contrast when room temperature equals body temperatureCloaking: Intruders may block their IR radiation

In these cases ACT automatically switches to microwave-only mode, enabling superior catch performance as well as immunity to false alarms


ApplicationsWarehousesFactoriesLibraries Retail & Department storesBanks & financial institutions Colleges & universities Public institutionsGymnasiumsTheaters, Museums Etc.


ApplicationsWarehousesIndustrial LuNAR is the ultimate detector for protecting warehouse inventory, due the 8.6m mounting height, and due to ACT which solves the heat problem FactoriesEspecially suitable in facilities that produce commodities with a high street value (computer chips, pharmaceuticals, weapons). The height and the catch performance discourage both internal and external theft.


ApplicationsMuseums, libraries, theatersIn public places peoples perception of security are very important. Industrial LuNAR appears like a strong capable sensing device. Yet its modern clean design fits into any dcor. An additional point is the customizable detection pattern for protecting loft areas common in libraries Government buildingsThe installation height and cover and wall tamper are advantageous here, for protection from internal theft and espionage.


Summary Industrial LuNAR incorporates years of dual technology innovation

Made by the company that introduced True Temperature Compensation for PIR detectors, and Anti-Cloak Technology for dual technology detectors.

Provides a whole new level of remote diagnostic capabilities, making installation and service easier

Only the Industrial LuNAR delivers the catch performance, false alarm immunity and protection needed in todays commercial and industrial environment

******************

8_industrial lunar - marketing ppt

Documents

ceilingmount detector

high ceiling mount detectors

secure coverage

mw coverage

better coverage

mthe coverage pattern

wallmounts shelves

lens sections