8gsh global standard high head · global pump® standard high head pumps are specifically ......
TRANSCRIPT
8GSH GLOBAL STANDARD HIGH HEAD
Global Pump® Standard High Head pumps are specifically designed to effectively handle a wide-range of liquids in applications such as liquid transfer, wash down, fire protection, fracking and jetting where high heads and pressure are required.
Global Pump Standard High Head pumps provide a dependable, highly efficient solution. The model 8GSH is capable of achieving maximum flows of 3,850 gpm (874 m3/h) and maximum total head of 411’ (125 m), with solids handling up to 1.375” (34.9 mm) in diameter.
The standard 8GSH is powered by a water-cooled, 6-cylinder diesel engine. Alternative drives are available, including other diesel engines or electric motor options.
FEATURES OPTIONSGlobal Pump’s rugged, heavy duty pumps are engineered specifically for portable application
Available with a variety of priming systems, including Global’s Auto Prime® automatic priming system (compressor-fed venturi priming) or a diaphragm priming system
Non-return valve uses only a single moving part to allow full flow with minimal restriction
Mechanical seal with glycol (biodegradable optional) quench allows the pump to start and run dry
Standard engine control panel provides preset emergency shutdown protection and allows the addition of automatic level control
Global Pump’s Environmental Box separates and silences air exhaust and returns liquid to the pump suction.
Fully guarded coupling Fuel cubes for extended run times and/or remote location as required
Pump casings are hydrostatically tested to 50 psig (345 kPa) above the peak casing design pressure
Sound attenuated enclosure options
Highway trailer with integral fuel cell/chassis, lights, fenders, tie downs, lifting bail, front and rear jacks. Trailer brakes can be offered as required
Skid-mounted formats with tie downs, lifting bail, and fork pockets
Hose racks, accessory containers and other custom features available as requiredWide range of suction and discharge fittings including Global Pump’s own “QD” Quick Disconnect fittings and accessories
l/s
m³/hr
US gpm
Po
wer
- hp
Hea
d -
ft
Hea
d -
mkW
40003750350032503000275025002250200017501500125010007505000 250
250
4000
50
250
0
75
100
125
3750350032503000275025002250200017501500150 1250
200
1000
250
750
300
500
350
250
400
0
0 25 50 75 100 125 150 175 200 225 250
100 200 300 400 500 600 700 800 900
2200 rpm
2100 rpm
2000 rpm
1900 rpm
1800 rpm
1700 rpm
1600 rpm34.1
34.1
56.2
56.2
71
71
77.7
77.7
81.3
81.3
82
82
77.8
77.8
PUMP MATERIALCasing Cast Steel (CD4MCu is an option)Impeller CD4MCuBearing Housing Cast IronBearing Lubrication GreaseShaft Stainless SteelSeal Silicon Carbide on Silicon CarbideChassis/Fuel Cell SteelNon-Return Valve Nitrile Fitted Cast Iron
SPECIFICATIONSConnections 8” x 6” (200 mm x 150 mm)
ANSI FlangesMax Pump Speed 2,200 rpmMax Flow 3,850 gpm (874 m3/h)Max Head 411’ (125 m)Max Static Priming Lift 28’ (8.5 m)Temperature Limit 160° F (70° C)Solids Handling Capability 1.375” (34.9 mm)Max Casing Pressure 200 psig (1379 kPa)Fuel Cell 151 gallons (572 liters)Dry Weight 7,000 lbs
10162 East Coldwater Road, Davison, MI 48423Tel: 810.653.4828 Fax: 810.658.0632
1.866.360.PUMP www.globalpump.com
GLOBAL PUMP
© 2018 Global Pump
Specifications reflect model pictured, and are subject to revision without notice. Global Pump is not liable for any consequential, incidental or indirect damages relating to these specifications.
8GSH GLOBAL STANDARD HIGH HEAD
8GSH