7e aluminum access hatches - thompson - tfco.comtfco.com/tufhatchbrochure.pdf · aluminum access...
TRANSCRIPT
THOMPSON FABRICATING COMPANY
7E Aluminum Access Hatches Thompson Fabricating Company has been in business since 1953. Over the
decades we have constantly measured the reliability of access doors in the
field. With this information we have engineered a line of competitively priced
aluminum floor hatches to meet the construction industry's exact needs. We
have continued working on these products throughout the years in an effort
to manufacture access doors that are second to none. We feel that our new
line of access doors combine the engineering and craftsmanship that will
deliver outstanding performance and durability like no other before.
THOMPSON FABRICATING CO. access doors are watertight*, gastight, and
odortight. We have incorporated this into our TUFHATCHES as a standard
without increasing our price.
"Watertight-for Single Leaf access hatches only
SLIP RESISTANCE AND THEFT DETERRENT
THOMPSON FABRICATING CO. is pleased to offer
MEBAC* coated access doors. With this product we
will be able to furnish one of the most non-slip surface
coatings available on the market today. Also, with this
coating we can offer you a theft deterrent by having
your name or logo embossed on the plate cover itself.
MEBAC is available on all THOMPSON FABRICATING
CO, TUFHATCHES
*MEBAC@ is a trademark of IKGIBorden
TYPE "THG"
7E Aluminum Floor Hatch
Hm)ROIE GASKET
STAINESS STEEL
REMNABLE PLUG
114' A L W VITH HllD OPEN OE TREAD PLATE
STAIKESS STEEL
Floor access doors shall be # T H G WATERTIGHT, ODORTIGHT, GASTIGHT as manufactured by Thompson Fabricating Company, Birmingham, AL. Door leaf shall be 114" aluminum checkered plate rein- forced with structural aluminum channels and shall be capable of with- standing a 300 pound1s.f. uniform load with minimal deflection. (Calculations will be provided to the engineer upon request.) The following items shall be type 316 stainless steel: slam locks, brackets, hinges and hardware. The door shall have a 316 stainless steel steel gas spring with SINGLE LEAF integral hold open device which will assist in opening the door and shall lock automatically in the open position. The door shall open a minimum of 90 degrees. The aluminum gutter frame shall be provided with a 1 112" round drain fitting and shall have a thickness no less than 114" and shall incorporate a neoprene gasket that will reduce air leakage to less than 1
CFM per lineal foot of frame when the interior of the hatch is subjected to a 2 inch water column vacuum. When in the open position the lid must not penetrate the gutter area.All fasteners which penetrate into the "Dry" area of the hatch shall be sealed with "0" Ring Seals to prevent incidental water and gas leakage. The portion of the frame which is in contact with the concrete shall receive a protective bituminous coating.
I OPTIONS:
LOCKING DEVICES, SLIP RESISTANT COATINGS
NOTES: Independent Lab Test Reports are available upon request. All double leaf access doors shall have two interconnected slam locks which latch at both ends of the plate and can be un-latched from a single point.
"Watertighr for standard single leaf doors shall be for a 1" to 2 head of water.
*HINGE SIDE
DOUBLE LEAF
MODEL
THG lDA THG 2DA THG 3DA THG 4DA
SIZES AND WEIGHT
WIDTH
4'-0 4'-0 4'-0 5'-0
LENGTH ' 4'-0 6'-0 5'-0 5'-0
bW
154 208 173 21 5
7F Aluminum Floor Hatch
W SEAL-
DOUBLE LEAF
MODEL SIZES AND WEIGHT
WIDTH LENGTH I M
THIDA I 4'-0 1 4'-0 154 TH 2DA I 4-0 1 6'-0 208
REUOVABLE
STAINLESS STEEL
STIFFENER VIS REWIRED)
SPRIffi CYLINDER 1/4' ALUUINUH TREAD PI-ATE
CWT. CONCRETE ANCHOR
*-
SINGLE LEAF
*HINGE SIDE
7YPE '' TH " Access Hatch
Floor access doors shall be # T H WATERTIGHT, ODORTIGHT, GASTIGHT as manufactured by Thompson Fabricating Company, Birm~ngham, AL. Door leaf shall be 114" aluminum checkered plate reinforced with structural aluminum channels and shall be capable of withstanding a 300 pound1s.f. uniform load with minimal deflection. (Calculations will be provided to the engineer upon request.) The fol- lowing items shall be type 316 stainless steel: slam locks, brackets, hinges and hardware. The door shall have a 316 stainless steel gas 1 spring with integral hold open device which will assist in opening the door and shall lock automatically in the open position. The door shall open a minimum of 90 degrees. The aluminum extruded frame shall have a thickness no less than 114" and shall incorporate a neoprene gasket that will reduce air leakage to less than 1 CFM per lineal foot of frame when the interior of the hatch is subjected to a 2 inch water
column vacuum. All fasteners which penetrate into the "Dry" area of the hatch shall be sealed with "0" Ring Seals to prevent incidental water and gas leakage. The portion of the frame which is in contact with the concrete shall receive a protective bituminous coating.
OPTIONS:
LOCKING DEVICES, SLIP RESISTANT COATINGS
NOTES:
Independent Lab Test Reports are available upon request.
All double leaf access doors shall have two interconnected slam locks which latch at both ends of the plate and can be un-latched from a single point.
"Watertight" for standard single leaf doors shall be for a 1" to 2" head of water.
Watertight, Gas tight, Odortight is a standard
for our "TH" Series doors just like the "THG " gutter style series.
With Thompson Fabricating Company's new gutter free "TH" Series aluminum access doors you
eliminate costly drainage piping for most !h EXTERIOR applications 4
Watertight Series (Q
Available in the "TH" and "THG" Frames - Single Leaf Only
t€m GASKET
~ F z E 7 4 ei (AS REQUIRED) REHIVABLE
SPRMi CYLWYR 1/4' ALUWIMl TREAD PLATE
STAINLESS STEEL
NEOPRENE W E T
TlON THRU F SPRING CYLINDER VlTH HaD [PEN DEV IN' ALWW
TREAD PLATE
HATCH SIZE
Floor access doors shall be #TH-WT OR THG-WT WATERTIGHT, vent inc~dental water and gas leakage The portion of the frame ODORTIGHT, GASTIGHT as manufactured by Thompson Fabrlcatlng whlch IS in contact w~th the concrete shall recelve a protectwe Company, Birmingham, AL Door leaf shall be 114" alumlnum checkered b~tuminous coating. plate reinforced with structural alum~num channels and shall be capable of withstandtna up to a 4'-10" head of water w~th min~mal OPTIONS: deflection. (~alculationi will be provided to the engineer upon request.) The following items shall be type 316 stainless steel: slam locks, LOCKING DEVICES, SLIP RESISTANT COATINGS
brackets, hinges and hardware. The door shall have a 316 stainless NOTES: steel gas spring with integral hold open device which will assist in opening the door and shall lock automaticallv in the open position. The
Independent Lab Test Reports are available upon request
door shall open a minimum of 90 degrees. he aluminum extruded SIZES: frame shall have a thickness no less than 114" and shall incorporate a neoprene gasket that will reduce air leakage to less than 1 CFM per lin- M Doors are available in all TH and THG Single Leaf Sizes.
eal foot of irame when the interior of the hatch is subiected to a 2 inch water column vacuum. For type THG doors the gutte; frames shall be provided with a 1 112" drain coupling. All fasteners which penetrate into the "Dry" area of the hatch shall be sealed with "0" Ring Seals to pre-
Available in the "TH" and "THG" Frames - Single or Double Leaf
Note: Thickness of remaining I concrete underneath frame must
be able to carry H20 wheel load.
3/16' STAINLESS STEEL M A I N
STAINLESS STEEL
WNT. CDJCRETE
H20 Doors at off-street locations only
^'-es and Hardware are the same standard as all TH and THG models.
NEDPRENE GASKET
SFCTION THRU FRAME
WARRANTY
Seller warrants for 5 years from date of shipment Seller's manufac- tured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recom- mends. If Seller's examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not
exceed the net sales price of the defective products and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship or damage resulting from the same. THIS IS SELLER'S SOLE WARRAN- TY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. This war- ranty shall not apply to any prod- ucts or parts of products which
(a) have been repaired or altered outside of Seller's factory, in any manner, or (b) have been subjected to misuse, harmful environments, negligence or accidents; or (c) have been used in a manner contrary to Seller's instructions or recommen- dations. Seller shall not be responsi- ble for design errors due to inaccu- rate or incomplete information sup- plied by Buyer or its representatives
Note: Custom sizes and configurations of Hatches are also available. For Hatches with special loading requirements, please inquire.
Located on 1 1 -acre site. Thompson Fabricating Company Facility Birmingham, Alabama
For further information on quality Thompson Products, contact us today:
1. Steel Fabricatiing Shop 6. Bulk Gas Storage 2. Aluminum Fabricating Shop 7, Main Office 3. Aluminum Hatch Production 8. Covered Paint Facility 4. Material Storage 9. Material Wharehouse 5. Engineering
7E THOMPSON FABRICATING COMPANY F? 0. Box 1 70 160, Birmingham, AL 352 1 7-0 160 Phone: 205/84 1-044 1 Fax: 205/84 1-0822 Toll Free: 1-800/824-6 182 www tfco. com E-mail: [email protected]