72781 chapter 04 d4.indd 1 8/10/09 11:22:16 am

72781_Chapter_04_D4.indd 1 8/10/09 11:22:16 AM

72781_Chapter_04_D4.indd 04-02 8/10/09 11:22:19 AM

04

WELDING EQUIPMENT & CONSUMABLES

04-03Phone 13 73 23 to order

Engine Driven Welders

• Provide all welding power needed with bonus of up to 12kVA auxiliary power• Quality silent engines deliver reliability and performance for welding or just

auxiliary power• Top quality Honda, Yanmar, Kubota and Perkins engines deliver the reliability

and performance in all environments• All units supplied with power source, 50mm² Dinse connectors

and operating manuals

Mfr No. Description Range Part Number636800 MPM 5/190H petrol 40 – 190A 0113 1969636808 MPM 8/255H petrol 25 – 255A 0113 2054636809 MPM 8/270K diesel 25 – 270A 0514 9222636810 MPM 5/170Y diesel 40 – 170A 0413 6770

Bobcat 250

• Ideal for maintenance and repair, rural fabrication, steel work, but operates as a stand alone generator

• Fully enclosed case provides 1⁄3 less noise than previous models while fully protecting the engine

• Multi-process capabilities – MIG, Stick, DC, AC, TIG

• 10,000 watts of accu-rated™ auxiliary power • Maintenance and repair, farm maintenance, fabrication and structural steel

Mfr No. Max Output Amps Mass kg Part NumberMR907211018 275 252 0523 8455

Weldskill 170

Mfr No. DescriptionSupply Voltage

Supply Amperage

Output Range Amperage Part Number

W1002901 Weldskill Inverter & tool box 240 15 5 – 170 0709 7881

W1001901 Weldskill Inverter 240 15 5 – 170 0709 7847

636800 636808

636809 636810

W1002901W1001901

Weldskill 130

• 240 Volt single phase• Superior arc characteristics on a range of welding electrodes

from 2.5 to 3.2mm diameter• DC lift TIG function for smooth starting• Comes with toolbox


Supply Amperage


W1002801 Weldskill inverter and tool box 240 10 5 – 130 0709 7830

W1001900 Weldskill inverter 240 10 5 – 130 0709 7813

Arc Slice Unit

• Cuts through almost anything• No pre-heating required• Protective hand guard

and spark arrestor built in• Up to 3 times faster than oxy fuel• Lightweight – complete SLICE

plant only 14kg• Portable – comes with toolbox

Mfr No. Description Part NumberOTW63991036 Arc slice unit 0654 0383

Weldarc & Weldmatic Gold Shield Warranty

Weldarc machines are covered by the WIA • “Gold Shield 3 Year Warranty” covering parts and workmanship – supported by an Australian wide networkWIA Backed•

Australian Made•

Local Support•

W1002801 W1001900

Cutting & Welding Equipment Fumes & Gas ExposureAmong the arc processes, SAW has the lowest fume formation rate – then GTAW, GMAW, MMAW and FCAW. Work practices that can reduce fume exposure levels and adverse health effects include:

Removal of rust inhibitors, paints, degreasers or other coatings on metals to be • cut or weldedSegregation of degreasing operations from welding tasks•

Positioning the welder away from the welding fumes as far as possible; and•

A non-smoking policy•

72781_Chapter_04_D4.indd 04-03 8/10/09 11:22:25 AM

04


04-04 blackwoods.com.au



• All DC Multi diesel engine drives come with a totally enclosed and sound reduced case

• Suitable for MMAW, MIG, FCAW, & Touch-Start Tig welding applications

• Delivers enough power to run lights, tools, pump and weld all at the same time

• Lincoln Electric’s CT Chopper® Technology controls DC welding output, creating an arc with superior welding performance

• 3 year parts and labour warrantyRanger® 305D• Powerful 300 amp DC multi-process

diesel engine driven welder• Excellent DC welding characteristics• Deliver 8,000W of 240V/415V

AC auxiliary power• Stick (conventional or pipe),

TIG, MIG or arc gouging modesVantage® 400CE• Four cylinder, diesel engine driven

400 amp DC arc welder and 13kVA AC power generator

• Delivers 13kVA of 240V/415V AC auxiliary power

• Excellent DC arc characteristics and multi-process CC/CV output

• Provides 400A at 60% duty cycle• Delivers high performance across

a wide range of welding processes including MMAW, FCAW, FCAW-SS, MIG, TIG or Gouging

Vantage® 575 • Provides 450 amps DC at 100%

duty cycle for heavy duty welding and arc gouging

• Delivers 20kVA of 240V/415V AC auxiliary power


• Built-in VRD (voltage reduction device)• Simplifi ed front panel layout with

presettable digital welding meters allowing quick and easy set-up

Air Vantage® 500• Multi-process powerhouse features 500

amps at 100% duty cycle, or 575 amps at 50%, tested at temperatures up to 40°C

• Delivers 12000W of 240V/415V AC auxiliary power


• Built-in VRD (voltage reduction device)• 60CFM @ 100psi air compressor built in• Powered by a 56HP liquid-cooled

Cummins engine with a 95 litre fuel tank• Designed especially for contractors,

maintenance and repair and all other fi eld-based welding professionals

Mfr No. Description Part NumberK2279-2 Ranger 305D 0784 0849K2502-4 Vantage 400CE 0784 0883K2170-2 Vantage 575 0784 0900K32012 Air Vantage 500 0784 0917

Ranger 305D

Vantage 400CE

Vantage 575

Air Vantage 500

Wire Feeders

• The LN-25 Pro semi-automatic wire feeder is ideal for fi eld or construction use

• Powered across the arc so no control cables are needed. Simply connect the weld cable, attach the welding clip and you’re ready to go

• Fully enclosed case ensures that this portable MIG and fl ux-cored feeder can tough out any work site

• Portable unit is designed for MIG or fl ux-cored wire

• Totally enclosed case accepts 6.3kg to 15kg spools for maximum portability• Features a tool-less quick release mechanism for easy changing of the electrode• Two models are available – one including a Magnum 400 MIG Gun, the other

a Magnum K126 Innershield Gun• Used with all electric or engine driven welders with CV and CC capabilities

and for multiple processes such as MIG, FCAW, FCAW-SS and SAW

Mfr No. Description Part NumberK2613-IA1 LN25 Pro including – K126 gun 0379 4662K2613-IA2 LN25 Pro including magnum 400 0784 0781

Torch & Electrodes – Gouging

K4000 Arcair Torch – Heavy Duty

Mfr No. Description Part NumberAA61082008 Extreme Angle-Arc manual torch 7’ Cable 0351 4959

K4000 Head Assembly

Mfr No. Description Part NumberAA94378368 K4000 Assembly head 0365 8016

Arcair DC Gouging Carbons

• Recommended for removal of metal from common ferrous and non-ferrous metal components such as those used in agriculture, automotive, construction, heavy fabrication, foundries, mining, quarrying, military, shipyards, power plants, railroads and steel mills

• Made from a mixture of carbon and graphite bound together then coated with a controlled thickness of copper

• Three types available: pointed, jointed and fl at• Designed for DC operation• All positional capabilities

Mfr No. Description Part Number22043003 6.5mm pointed 50 rod packet 0103 215222053003 8.0mm pointed 50 rod packet 0067 696022063003 9.5mm pointed 50 rod packet 0103 235622155006 9.5mm high effi ciency 50 rod packet 0653 348124104003 16mm pointed 100 rod packet 0514 925624124003 19mm pointed 100 rod packet 0349 699235033003 15 x 5 x 305mm fl at 0337 4898

72781_Chapter_04_D4.indd 04-04 8/10/09 11:22:29 AM

04



Gouging Carbons

Mfr No. Description Size mm Part NumberKA1054-048 Gouging carbon – pointed 4.8 0379 4696KA1054-063 Gouging carbon – pointed 6.3 0040 5399KA1054-080 Gouging carbon – pointed 8.0 0233 9965KA1054-095 Gouging carbon – pointed 9.5 0379 4883KA1196-130 Gouging carbon – jointed 13 0033 9218KA1196-16 Gouging carbon – jointed 16 0496 1083KA1196-19 Gouging carbon – jointed 19 0401 7158

Gouging Torches

Mfr No. Description Part Number94009000-K4 Gouging torch Powercraft K4000 0485 872694009000-K3 Gouging torch Powercraft K3 0784 105394009000-01 Gouging torch Insulator Assy 0784 130894009000-03 Gouging torch Head Assy 0784 132594009000-04 Gouging torch upper arm 0784 1342

Arc Electrodes – Mild Steel

Satincraft 13

• Suitable for welding mild or galvanised steel such as gates, door frames, tanks, pipes and home projects

• General purpose Rutile type electrode with all positional welding capabilities• Smooth mitre fi llet welds with LOW spatter• Blue fl ux for easy identifi cation• Smooth running AC or DC• Classifi cation AS: E4113-0

Mfr No. Description Part Number612182 2.5mm 2.5kg packet 0022 6695611182 2.5mm 5.0kg packet 0822 5007611183 3.2mm 5.0kg packet 0822 4804611184 4.0mm 5.0kg packet 0826 9102322203 2.5mm/3.2mm blister packet 0338 1834

GP6012

• Versatile general purpose electrode for all positional welding thin and mild steel• Smooth running AC or DC• Suitable for mild steel plate, sheet metal, galvanised iron sheet, ducting,

tanks, pipes and low pressure pipelines• Classifi cation AS: E4112-0

Mfr No. Description Part Number611142 2.5mm 5.0kg packet 0804 8802611143 3.2mm 5.0kg packet 0804 8705611144 4.0mm 5.0kg packet 0804 8608

94009000-K4

Ferrocraft 12XP

• Suitable for all positional fi llet welding of steel furniture, plates, fences, gates, pipes and tanks

• General purpose ‘XP’ (extra smooth performance) electrode• Versatile with all positional capabilities• Red fl ux for easy identifi cation• Classifi cation AS: E4112-0

Mfr No. Description Part Number612231 2.0mm 2.5kg packet 0081 7122612232 2.5mm 2.5kg packet 0514 9239612233 3.2mm 2.5kg packet 0363 7276611232 2.5mm 5.0kg packet 0511 7764611233 3.2mm 5.0kg packet 0511 7866611234 4.0mm 5.0kg packet 0511 7962

Weldcraft

• Suitable for on-site and workshop welding such as pressure vessels, ship building, bridge and storage tank fabrications

• Rutile, basic type electrode with high radiographic qualities and excellent mechanical properties

• High quality AC or DC all positional (except vertical down) electrode• Classifi cation AS: E4113-2


Ferrocraft 11

• Suitable for root, hot fi ll and capping pass welding of pipelines, pressure vessels, storage tanks, workshop and fi eld construction

• Cellulose pipe welding electrode for high penetration welding• AC or DC all positional electrode• Classifi cation AS: E4111-2


Electrode JBS 6012

• The electrode tips are coated with a starting compound for easy starting with low OCV (Open Circuit Voltage) machines or those fi tted with VRD (Voltage Reduction Device)

• Suitable for welding joints with poor fi t-up, excellent gap bridging

• Fast freezing slag suitable for vertical down welding on thin steel sheet

• Suitable for use with AC or DC- polarity current

• Medium arc action with good slag release• The JBS 6012 is a Rutile fl ux type general purpose, all positional including

vertical down electrode• Recommended applications include RHS tube, mild steel and galvanised

sheet, ducting, hoppers, gates, tanks, trailers and steel furniture• Classifi cation: AS/NZS 4855:2007-B-E43 12 A(AS/NZS1553.1 E4112-0 Previous Classifi cation)AWS/ASME-SFA A5.1 E6012

Mfr No. Description Part Number03125083 Electrode JBS 6012 2.5mm 2.5kg 0312 508303125100 Electrode JBS 6012 3.2mm 2.5kg 0312 5100

72781_Chapter_04_D4.indd 04-05 8/10/09 11:22:32 AM

04



Electrode JBS 6013

• The electrode tips are coated with a starting compound for easy starting, with low OCV (Open Circuit Voltage) machines or those fi tted with VRD (Voltage Reduction Device)

• Mitre fi llets with smooth edge wetting• Excellent down hand, horizontal vertical,

overhead and vertical up welding positions. Not recommended for vertical down welding position

• For use with AC, DC+ or DC- polarity currents• Very low spatter with excellent slag release,

self releasing in most cases• The JBS 6013 is a Rutile fl ux type general purpose, all positional excluding

vertical down electrode• Recommended applications include general workshop, fi eld structural steel

and galvanised sheet, low pressure pipe, gates, tanks, trailers and steel furniture• Classifi cation: AS/NZS 4855:2007-B-E43 13 A

(AS/NZS 1553.1 E4113-0 Previous Classifi cation)AWS/ASME-SFA A5.1 E6013

Mfr No. Description Part Number03125134 Electrode JBS 6013 2.5mm 2.5kg 0312 513403125151 Electrode JBS 6013 3.2mm 2.5kg 0312 5151

Austarc 12P

• Easy starting, smooth running, all position mild steel general purpose electrode• Extra arc force and fast freezing slag required for vertical down welds• Ideal for 'one electrode shops'• General welding, trailer repairs, galvanised steel, farm equipment,

tubular steel and wrought iron work• AS/NSW 4855: ISO 2560-B E4313A Classifi cation

Mfr No. Description Part Number12P20 2.0mm 2.5kg packet 0021 273812P25 2.5mm 2.5kg packet 0339 835712P32 3.2mm 5.0kg packet 0339 845412P40 4.0mm 5.0kg packet 0489 575212P50 5.0mm 5.0kg packet 0014 0845

Austarc 13S

• Very popular blue and white striped, mild steel general purpose electrode• Ideal for welding down hand and vertical positions• Easy to use for less experienced operators• General welding, trailer repairs, galvanised steel, wrought iron work,

tubular steel and sheet metal work• AS/NSW 4855: ISO 2560-B E4313A Classifi cation

Mfr No. Description Part Number13S20 2.0mm 2.5kg packet 0021 091913S25 2.5mm 2.5kg packet 0449 321513S32 3.2mm 5.0kg packet 0449 261413S40 4.0mm 5.0kg packet 0489 585413S50 5.0mm 5.0kg packet 0091 0741

Austarc 77

• Smooth running, basic type iron powder electrode used for all positional welding, except vertical down

• Delivers consistent, high quality welds to maintain welding performance and appearance

• X-Ray quality welds with high impacts to sub zero temperatures of -50˚C are achievable

• Pipe welding, pressure vessel, highly restrained joints, maintenance applications, structural steel and earth moving plant repairs

• AS/NZS ISO 4855: ISO 2560-B: E4918-1AU H5

Mfr No. Description Part Number7725 2.5mm 2.2kg packet 0117 32627732 3.2mm 5.0kg packet 0091 06737740 4.0mm 5.0kg Packet 0119 2812

Austarc 16TC

• Unique twin coated, low hydrogen, smooth running electrode• Suits all welding positions - except vertical down• Excellent operator appeal• Low spatter levels• Excellent edge wetting and easy to remove slag• Grade 4 high quality weld deposits with exceptional

weld toughness and crack resistance• Pipe welding, maintenance/agricultural applications, structural steel/construction,

mining/earth moving equipment and highly restrained joints• AS/NZS 4855: ISO 2560-B: E4916AU H10

Mfr No. Description Part Number16TC25 2.5mm 2.5kg packet 0408 545216TC32 3.2mm 5.0kg packet 0175 265216TC40 4.0mm 5.0kg packet 0175 305416TC50 5.0mm 5.0kg packet 0021 108916TC60 6.0mm 5.0kg Packet 0021 0783

Arc Electrodes – Low Hydrogen & Alloy Steel

Ferrocraft 61

• Designed for all positional welding on heavier steel sections under high restraint such as machinery parts, pressure vessels, mining equipment, pipework, ship construction, maintenance and repair work

• Basic coated hydrogen controlled electrode• Excellent for out of position welding• Batch number identifi cation• Classifi cation AS: E4818-3 H10

Mfr No. Description Part Number611342 2.5mm 5.0kg packet 0804 6804611343 3.2mm 5.0kg packet 0804 6707611344 4.0mm 5.0kg packet 0804 6600611345 5.0mm 5.0kg packet 0804 6503

Ferrocraft 16TXP

• Suitable for welding of heavier mild steel sections or joints under high restraint, repair of earthmoving equipment and ‘buttering’ of sections prior to hard facing

• Hydrogen controlled 'XP' series all positional except down electrode

• Length: 350mm for all sizes – less wastage

• Packed in hermetically sealed cans• Classifi cation AS: E4816-2 H10

Mfr No. Description Part Number613562 2.5mm 3.0kg can 0654 1437613563 3.2mm 3.0kg can 0654 1454613564 4.0mm 3.0kg can 0654 1488

Ferrocraft 55U

Mfr No. Description Part Number611492 2.5mm 5.0kg packet 0025 6768611493 3.2mm 5.0kg packet 0022 6474611494 4mm 5.0kg packet 0022 6389

72781_Chapter_04_D4.indd 04-06 8/10/09 11:22:35 AM

04



Ferrocraft 61NIH4

Mfr No. Description Part Number611813 3.2mm 3.0kg can 0347 6949611814 4.0mm 3.0kg can 0347 6966

Arc Electrodes – Iron Powder

Ferrocraft 21

• Suitable for workshop or on-site repair, maintenance and fabrication welding jobs• Ideal for vertical-down fi llet welding of thinner steel sections using

‘touch welding’ techniques• Rutile type, medium iron powder electrode• AC or DC all positional electrode where

touch welding and higher speeds are desirable• Classifi cation AS: E4814-2


Ferrocraft 22

• Ideal for heavy structural welding such as tanks, frames, girders, beams, ship structures, rolling stock and general fabrication

• Rutile type, high iron powder electrode for high productivity fi llet and butt welding• AC or DC in down hand position electrode for high speed touch welding• Classifi cation AS: E4824-2


Arc Electrodes – Stainless Steel

Satincrome 316L – 17

• Suitable for single and multi-pass welding of matching Mo bearing Stainless Steels, 316 and 316L

• Also suitable for general purpose welding of other 300 Series austenitic Stainless Steels

• Rutile type, Stainless Steel electrode• All positional welding electrode• Classifi cation AS: E316L-17


Satincrome 308L – 17

• Recommended for single and multi-pass welding of 19Cr/10Ni type Stainless Steel grades including 201, 202, 301, 302, 303 and 304

• Rutile type, Stainless Steel electrode• All positional welding electrode• Classifi cation AS: E308L-17


Satincrome 309Mo – 17

• Suitable for single and multi-pass welding of matching 309 and 309L Stainless Steels

• Also suitable for dissimilar welding of other 300 Series and selected 400 Series grades to mild or low alloy steels

• Rutile type, Stainless Steel electrode• All positional welding electrode• Classifi cation AS: E309Mo-17


Satincrome 318 – 17

• Recommended for fi llet and butt welding of stabilised and unstabilised 19Cr/10Ni type Stainless Steels, such as 316, 318 and 321

• Rutile type Stainless Steel electrode• High AC arc stability is a feature of this electrode• All positional welding electrode• Classifi cation AS: E318-17

Mfr No. Description Part Number611652 2.5mm 2.5kg packet 0805 7505611653 3.2mm 2.5kg packet 0805 7408

Weldall

• Recommended for the repair and maintenance of all steels• Also suitable for joining dissimilar steels such as stainless

to carbon steel and repairing die or tool steels• Not recommended for welding cast irons• Can be used as a protective overlay against corrosion• Easy to use Rutile type, high alloy electrode• Classifi cation AS: E312-17

Mfr No. Description Part Number611702 2.5mm 2.5kg packet 0979 4715322101 2.5mm 20 rod handipack 0827 2814611703 3.2mm 2.5kg packet 0979 4618611704 4.0mm 2.5kg packet 0067 6768

72781_Chapter_04_D4.indd 04-07 8/10/09 11:22:40 AM

04



Staincord

309Mo-16• All positional, Rutile type Stainless

Steel electrode which deposits very low carbon weld metal of 23Cr/12Ni/2.5Mo type

• For welding of matching 309 and 309Mo base metals and a wide range of 300 and 400 Series Stainless Steel to alloyed and non-alloyed dissimilar ferrous metal combinations

• AS/NZS 4854: ISO ES309LMo – 16 Classifi cation316L-16• Rutile Stainless Steel electrode exhibiting superior all positional welding (except

vertical down) performance, depositing weld metal of 19Cr/12Ni/2.5Mo type• Recommended for welding 316, 316L and common 300 Series Stainless Steel• Suitable for welding ferritic Stainless Steel alloys such as 3Cr12• AS/NZS 4854 ISO 3581-B: E316L-16 Classifi cation

Mfr No. Description Type Part NumberSC309MO25 2.5mm 2.5kg packet 309MO-16 0021 0562SC309MO32 3.2mm 2.5kg packet 309MO-16 0533 0067SC31620 2.0mm 2.5kg packet 316L-16 0017 1377SC31625 2.5mm 2.5kg packet 316L-16 0489 6558SC31632 3.2mm 2.5kg packet 316L-16 0489 6660

Arc Electrodes – Cast-Iron

Castcraft 100

• Recommended for repair and reclamation of engine blocks, cylinder heads, differential housings, gear boxes, cast iron pulleys, pump and machine housings

• Easy starting and stable running electrode on portable 240V machines• Lime fl uorspar/graphite coating• Soft ductile nickel deposit that is readily machinable• Downhand direction electrode• For maintenance welding of cast irons• Classifi cation AS: Eni-Cl


Castcraft 55

• High strength repair and maintenance of SG irons, austenitic cast irons, meehanites and a range of grey cast irons

• Higher strength nickel/iron deposit• Easy starting and stable running on 240V welding machines• Classifi cation AS: EniFe-Cl

Mfr No. Description Part Number611723 3.2mm 2.5kg packet 0804 3205

Supercast

NI/FE• Basic graphite coated electrode for higher strength welding of cast irons• For repair and build up of S.G. irons and standard grades of grey cast iron,

malleable iron, austenitic cast iron and some grades of meehanite cast iron• Suited to welding these cast irons with steel• AWS A5.15ENiFe-CI Classifi cationNI• Basic graphite coated electrode for lower strength welding of cast irons• For repair and build-up of all standard grades of grey cast iron, malleable iron,

austenitic cast iron and some grades of meehanite cast iron• AWS A5.15:ENi-CI Classifi cation

Mfr No. Description Part NumberSNIFE32 3.2mm 2.5kg packet NI/FE 0017 1445SNI32 3.2mm 2.5kg packet NI 0489 6764

Arc Electrodes – Hard Facing

Cobalarc Austex

• Recommended for joining dissimilar steels or as a buffer layer prior to hard surfacing

• Creates a tough, machinable austenitic steel deposit• Metal enriched, Rutile type electrode• Downhand direction electrode• Classifi cation AS: 1315-A4


Cobalarc 350

• Recommended for the manual arc build-up and surfacing of steel gears, shafts, rails, shovel pads, track links, rolls and wheels

• Metal enriched, Rutile type electrode for re-building worn steel components• Downhand direction electrode• Classifi cation AS: 1435-A4


Cobalarc 650

• Metal enriched, Rutile type electrode for rebuilding or surfacing worn steel components

• Air hardening, crack free, martensitic steel deposit• Downhand direction electrode• Surfacing of agricultural points, shares and tynes, grader and dozer blades,

conveyor screws and post hole augers• Classifi cation AS: 1855-A4


Cobalarc 750

• Rutile type, AC/DC hard surfacing electrode• Easy arc starting and running on portable AC welding equipment• Downhand direction electrode• Surfacing of agricultural equipment and components including points, shares,

post hole augers, ripper teeth and tynes• Classifi cation AS: 1860-A4


72781_Chapter_04_D4.indd 04-08 8/10/09 11:22:42 AM

04



Cobalarc Toolcraft

• Suitable for general hard surfacing in low stress abrasion conditions• Crack free Cr-Mo steel deposit for repairing blades, dies and punches• Versatile manual arc electrode with secondary hardening and shock

resistant properties• Downhand direction electrode• Classifi cation AS: 1560-A4


Cobalarc CR70


Cobalarc 9E


Tubecord E-2460

• Weld deposit offers improved abrasion through higher levels of carbon and chromium

• Ideal for hard surfacing components subjected to heavy abrasion and moderated impact loading

• Hard surfacing of dredge bucket lips, shovel buckets, scraper and dozer sides, cone crushers and mill hammers

• AS/NZS 2576 2460-A1

Mfr No. Description Part NumberTUBE60 6.3mm 5kg packet 0021 1446TUBE80 8.0mm 5kg packet 0021 1412

Unicord 312

• Basic, Rutile type electrode depositing 29Cr/9Ni type Stainless Steel weld metal for high strength welding of a wide range of alloy steels and dissimilar ferrous metals

• For repair and maintenance of steels of unknown composition. Also suitable as a buffer or intermediate layer prior to the application of hard surfacing

• AS/NZS4854: ISO 3581-B: ES312-16

Mfr No. Description Part NumberUC31225 2.5mm 2.5kg packet 0014 0930UC31232 3.2mm 2.5kg packet 0014 0896

Abrasocord 43 & 350 & 700

43• Heavy coated hard facing electrode

depositing very hard chromium/niobium carbides in an austenitic matrix• Suitable where resistance to extreme abrasion and moderate to heavy impact

are required such as press screws, grizzley bars, crusher hammers, ripper teeth and shovel teeth and lips

• AS/NZS 2576:2465-A4 Classifi cation350• Smooth running electrode depositing a tough wear resistant air hardening

C/Mn/Cr steel alloy which is machinable and can be readily hot forged• Suitable for heavy build-up and surfacing of steel components subjected

to metal-to-metal wear and compressive loading such as track components, gears and shafts

• AS/NZS 2576:1435-A4 Classifi cation

700• Smooth running electrode depositing

an air hardening martensitic Cr/Mo/V steel alloy• Suitable for surfacing of post hole augers, agricultural points, shares and tynes,

grader and cultivator blades and other components subject to fatigue or fl exing during service

• AS/NZS 2576:1855-A4 Classifi cation

Mfr No. Description Type Part NumberAC4332 3.2mm 5kg packet 43 0021 1327AC4340 4.0mm 5kg packet 43 0006 3733HF35032 3.2mm 5kg packet 350 0006 3699HF35040 4.0mm 5kg packet 350 0017 1496HF70032 3.2mm 5kg packet 700 0489 6162HF70040 4.0mm 5kg packet 700 0489 6456HF70050 5.0mm 5kg packet 700 0006 0333

Arc Electrodes – Cellulose – Lincoln

Fleetweld® 5P

• Great choice for pipe root runs and also for welding on dirty, rusty, greasy or painted steel – especially in vertical or overhead applications

• Versatile, fast freeze electrode offers excellent arc stability• Long-time favourite among operators who handle

cross-country and in-plant pipe welding• Typically used in pipe welding applications• AS/NZS 4855-B E4310A

Mfr No. Description Std Pack Part NumberED010211 2.4mm 22.68kg packet 1 0295 3557ED010203 3.2mm 22.68kg packet 1 0295 3961ED010216 4.0mm 22.68kg packet 1 0295 3864ED010207 4.8mm 22.68kg packet 1 0295 4057

Welding Accessories

Arc Welding Lead Sets

• Manual arc welding lead sets designed with durable, single insulated welding cable robust holders and work clamps

Mfr No. Description Part Number

646323 200A welding lead set, 5m cable 16mm², 25mm plug, twist lock holder 0426 3555

646386 200A welding lead set, 3m cable 16mm², 25mm plug 0483 4297646325 400A welding lead set, 8m cable 35mm², 50mm plug 0425 2256646387 600A welding lead set, 8m cable 35mm², 50mm plug 0483 4331

Electrode Holders

• Fully insulated to protect the operator• Both the 646165 and 646142 comply

to AS2826 Type “A”

Mfr No. Description Part NumberCEH200T 200A tong type holder 0483 5555646165 Twist lock 250A to 5mm diameter 0806 3803CEH250TL 250A twist lock holder 0491 4146646344 Tweco® tong 400A to 9.5mm diameter 0811 3407646214 Tong 400A to 6mm diameter 0811 3504CEH400TL 400A twist lock holder 0491 4180646142 Twist Lock 400A to 8mm diameter 0806 3502CEH400T 400A tong type holder 0491 4163CEH600TL 600A twist lock holder 0491 4214646343 Twist lock 600A to 8mm diameter 0806 3706CEH600T 600A tong type holder 0491 4197

646142

72781_Chapter_04_D4.indd 04-09 8/10/09 11:22:45 AM

04



Welding Work Clamps

• All clamps are designed to maximise earthing potential onto the plate

646348, 646349 and KP301R• Have quality spring loaded jaws together with copper shunt646351• ‘G’ clamp is an all brass construction with steel fi xing screw646352• ‘Tong’ clamp is an all brass construction with copper shunt

Mfr No. Description Part Number646348 200A spring type heavy duty, copper shunt 0806 3201646349 400A spring type heavy duty, copper shunt 0806 3308646350 600A spring type 0447 0704KP301R 250A spring type, copper shunt 0469 5554CWC150R 150A spring loaded 0491 4333CWC500 500A spring loaded 0491 4384646351 500A g type 0806 3609646352 500A tong type 0806 3405646353 250A rotary type 0666 3905646354 500A rotary type 0666 3922646355 1000A rotary type 0666 3888CWC400 400A spring type/work clamp 0491 4367

Superfl ex Welding Cables

• Premium grade copper welding cable which offers fl exibility over a wide range of environmental conditions and performance benefi ts over welding cables previously available

Mfr No. Description Part Number7901220 16mm² 150 metre drum 0824 17067901221 25mm² 150 metre drum 0824 19007901222 35mm² 100 metre drum 0824 16097901223 50mm² 100 metre drum 0212 92067901224 70mm² 50 metre drum 0824 1803

Crimp Lugs

• Quality, durable, designed to fi t welding cables from 16mm² to 95mm²

Mfr No. Description Hole Size mm Part NumberKP2453 16 to 25mm² cable 13 0321 1511KP774 25 to 50mm² cable 13 0434 1516KP887 50 to 70mm² cable 13 0003 2793KP892 70 to 95mm² cable 19 0321 1414CL500M 25mm to 50mm² cable 14 0491 4299CL750L 70mm to 95mm² cable 16 0491 4316

Wire Brushes – Timber Handles

• General purpose use in light deburring, cleaning and derusting

No. Rows Wire Type Part Number3 Steel 0422 14033 Steel – Converging 0422 17043 Stainless Steel 0421 48053 Stainless Steel – Converging 0421 50084 Brass 0421 46014 Steel 0442 70004 Stainless Steel 0421 4902

Timber Handle

Wire Brushes – Plastic Handles

• General purpose use in light deburring, cleaning and derusting

• Plastic handle impervious to most oils, thinners and brake fl uid

Wire Type Part NumberBrass 0230 6193Steel 0129 0613Stainless Steel 0129 0851

Cable Connectors

• Designed to continue in-line welding power to the job• Dinse in-line connector designs are parallel

male plug or female connectors• Tapered twist lock connectors

are supplied as complete kits – male plugs and female connectors

• Dinse panel sockets (output connectors) are designed to fi t into welding machines

Mfr No. Description Part Number705152 Dinse 25mm² male 0068 4284705153 Dinse 25mm² female 0483 4501704461 Dinse 50mm² male 0363 7004705154 Dinse 50mm² female 0483 4518705155 Dinse 70mm² male 0483 4535705156 Dinse 70mm² female 0483 45527977159 Dinse panel/socket 2mm² 0051 1207704460 Dinse panel/socket 5mm² 0514 9698646161 300A tapered twist lock up to 50mm² 0321 4217646162 500A tapered twist lock up to 70mm² 0321 5818646284 Cable connector 0081 4258

Dinse connectors do not fi t the tapered twist lock connectors

Electrode Drying Ovens

Drying Ovens

VB1689• Specifi cally designed

to prevent moisture pick-up in manual arc electrodes

• Variable temperature setting enables electrodes to be maintained for optimum performance

• Supply: 240V 50H2 AC• Maximum temperature: 120°C• Electrode capacity: 11kg

Mfr No.Ext Dimensions W x H x D mm

Int Dimensions W x H x D mm Part Number

VB1689 178 x 165 x 556 137 x 124 x 489 0334 6114

Brass Steel Stainless Steel

705152

705153

646161

72781_Chapter_04_D4.indd 04-10 8/10/09 11:22:48 AM

04



MIG Welding Machines – Cigweld

Transmig 165 Plant

• Compact and portable with gas and gasless operation

• Easy to use panel controls• 6 fi ne welding voltage

control settings• Weldable metals: mild steel,

Stainless Steel and aluminium• Duty cycle 20% @ 150 amps• Welds up to 6.0mm mild steel• Take minispools and 5kg

wire spools• Supplied with power source, MIG gun (3 metre), work lead (3 metre), gas

regulator, gas hose, primary lead for preset supply voltage and operating manual• Light fabrication, automotive repair, home workshop, light rural and maintenance

Mfr No.Supply Voltage

Supply Amperage


706555 240 10 30 – 165 0347 0863

Transmig 200 Plant

• Ideal for fabrication• Easy to use panel controls• Weldable metals: mild steel,

Stainless Steel and aluminium• Spot weld timer and 8

voltage settings• Duty cycle 15% @ 190 amps• Welds up to 8.0mm mild steel• Takes 5kg and 15kg rolls of wire• Supplied with power source,

MIG gun (3 metre), work lead (3 metre), gas regulator, wheeling kit/cylinder tray, primary lead for preset supply voltage, 0.6/0.8mm feed rolls and operating manual


Supply Amperage


710000 240 15 30 – 200 0412 5618

Transmig 225C

• Weldable metals: mild steel, Stainless Steel and aluminium

• Gas and gasless MIG welding• 16 voltage settings• Duty cycle 25% @ 220 amps• Welds up to 10.0mm mild steel• Takes 5kg and 15kg wire spools• Fitted with TWECO® range

of MIG guns• Supplied with power source,

TWE2 MIG gun (3.6 metre), work lead (3 metre), gas regulator, wheeling kit/cylinder tray, primary lead for preset supply voltage, 0.9/1.2mm feed rolls and operating manual

• Fabrication, automotive repairs and garage


Supply Amperage


710001 240 15 30 – 220 0514 9273

Transmig 255 Compact & Remote Plants


• Gas and gasless MIG welding• 16 voltage settings• Duty cycle 30% @ 250 amps• Welds up to 12.0mm mild steel• Takes 5kg and 15kg rolls of wire• Fitted with TWECO® range

of MIG gunsTransmig 255 Compact• Fully contained welding unit• Supplied with power source,

TWECO® MIG Gun (3.6 metre), work lead (3 metre), gas regulator, wheeling kit/cylinder tray, primary lead for preset supply voltage, 0.9/1.2mm feed rolls and operating manual

Transmig 255 Remote• Supplied with power source,

separate remote wirefeeder with 8 metre interconnection leads, TWECO® MIG gun (3.6 metre), work lead (8 metre), gas regulator, wheeling kit/cylinder tray, primary lead for preset supply voltage, 0.9/1.2mm feed rolls and operating manual

• Industrial fabrication and farming


Supply Amperage


710007 255 compact 240 15 30-250 0489 9067710002 255 remote 240 15 30-250 0489 9135

Transmig 275 Remote Plant


• Gas and gasless MIG welding• 24 voltage settings• Duty cycle 40% @ 275 amps• Heavy duty 4 roll wire

feeder system• Welds up to 14.0mm mild steel• Takes 5kg and 15kg rolls of wire• Fitted with TWECO® range

of MIG gunsTransmig 275 Remote• Supplied with power source,

separate remote 4 roll wirefeeder system with 8 metre interconnection leads, TWECO® MIG gun (3.6 metre), work lead (8 metre), gas regulator, wheeling kit/cylinder tray, primary lead for preset supply voltage, 0.9/1.2mm feed rolls and operating manual

• Industrial fabrication and heavy farming applications


Supply Amperage


706118 275 remote 240 15 30 – 275 0489 9101

Conditions apply: 15 amp plug and lead is fi tted for initial commissioning only. 32 amp plug and lead required for maximum duty cycle output.

710007

710002

72781_Chapter_04_D4.indd 04-11 8/10/09 11:22:52 AM

04



Transmig 350 Compact & Remote Plants

• Weldable metals: most metals• Excellent arc characteristics with gas

metal or fl ux-cored arc welding with or without gas

• 3 phase 415 volt supply required• Digital voltage and amperage meters• Duty cycle 30% @ 350 amps• 36 voltage settings• Welds up to 25.0mm mild steel• Takes 5kg and 15kg rolls of wireTransmig 350 Compact• Fully contained welding unit • Supplied with power source, TWECO®

MIG gun (3.6 metre), work lead (3 metre), gas regulator, wheeling kit/cylinder tray, primary lead for preset supply voltage, 0.9/1.2mm feed rolls and operating manual

Transmig 350 Remote• Supplied with power source, separate remote 4 roll

wirefeeder system with 8 metre interconnection leads, TWECO® MIG gun (3.6 metre), work lead (8 metre), gas regulator, wheeling kit/cylinder tray, primary lead for preset supply voltage, 0.9/1.2mm feed rolls and operating manual

• Medium fabrication and heavier maintenance


Supply Amperage


706126 350 compact 415 15 25 – 330 0065 8308706128 350 remote 415 15 25 – 330 0065 8291

Transmig Synergic Pulse Range

• Multi-process machine capable of GMAW (MIG), synergic non-pulse, synergic Pulse, GTAW (TIG), MMAW (stick) and CAG (gouging)

• General steel, Stainless Steel and aluminium fabrication

• Ideal for aluminium boat fabrication, wine tank fabrication, pipe welding and maintenance repairs

• Standards compliant built in VRD in MMAW (stick) mode


Supply Amperage


W1000100

Transmig 320SP power source only – duty cycle 60% @ 270 amps

415 21 5 – 320 0653 3770

W1000300

Transmig 400SP gas cooled power source only – duty cycle 60% @ 350 amps

415 27 5 – 400 0654 0349

Wire feeder and accessories shown in picture available

706128

706126

Transmig 400 Professional Plant

• Weldable metals – most metals• 3 phase 415 volt supply required• Digital voltage and amperage meters• 36 welding voltage control settings• Fully enclosed spool cover• Duty cycle 30% @ 400 amps• Welds up to 25.0mm mild steel• Takes 5kg and 15kg rolls of wire• Supplied with power source, separate

remote 4 roll wirefeeder system with 8 metre interconnection leads, TWECO® MIG gun (3.6 metre), work lead (8 metre), gas regulator, wheeling kit/cylinder tray, primary lead for preset supply voltage, 0.9/1.2mm feed rolls and operating manual

• Fabrication industry


Supply Amperage


706405 415 15 30 – 400 0377 7526

Transmig 400HD Remote Plant

• Heavy duty design and construction• Weldable metals: most metals• Solid wires up to 1.6mm diameter run at

high duty cycles together with the ability to provide high deposition performance with fl ux-cored wires of up to 2.4mm

• 3 phase 415 volt supply required• Digital voltage and amperage meters• 36 fi ne welding voltage control settings

and trigger latching• Duty cycle 50% @ 400A• Supplied with power source, separate

remote 4 roll wirefeeder system with 8 metre interconnection leads, TWECO® MIG gun (3.6 metre), work lead (8 metre), gas regulator, wheeling kit/cylinder tray, primary lead for preset supply voltage, 0.9/1.2mm feed rolls and operating manual

• Designed specifi cally for metal fabrication industry


Supply Amperage


704685 415 20 22 – 400 0450 5459

Transmig 400i Power Source

• MIG, Lift TIG and Stick weld operations• Compact and portable• Weldable metals: most metals• 3 phase 415 volt supply required• Digital voltage and amperage meters• Save load (recall) weld programs• Duty cycle 25% @ 400 amps;

60% @ 300 amps• Supplied with power source, two Dinse

plug connectors and operating manual• VRD compliant to AS/NZS 3195 and

IEC60974-1



710014 415 5 – 400 0412 5669

72781_Chapter_04_D4.indd 04-12 8/10/09 11:22:55 AM

72781_Chapter_04_D4.indd 04-13 8/10/09 11:22:57 AM

04



MIG Welding Machines – WIA

Weldmatic 175

• Fillet weld up to 8mm steel, Stainless Steel and aluminium in a single pass

• Suitable for gas shielded and gasless wires• 1kg and 5kg spool capacity• Trolley with tool tray included• 3 year Gold Shield Warranty• Australian made• 175 Amp MIG welder for home workshops,

trades, light industry, rural hire and fl eets

Mfr No. Voltage Amperage Range Part NumberCP122-1 240 15 35-175A 0336 4375

Weldmatic 256

• Fillet weld up to 12mm steel, Stainless Steel aluminium in a single pass

• Suitable for gas shielded and gasless wires

• Low easy access bottle tray for operator safety

• 5kg and 15kg spool capacity• Australian Made• 3 year Gold Shield Warranty• 255 amp MIG Welder for light and

medium manufacturing and farm maintenance

Mfr No. Voltage Amperage Range Part NumberCP124-1 240 25 30-255A 0335 8884

Weldmatic 356

• 355 amp MIG Welder for industrial fabrication workshops

• Fully enclosed W61 4RD wirefeeder

• Low and easy access bottle tray• Dual front handles with easy

rubber grip• Fan-on-demand™ cooling system• Made in Australia• 3 year Gold Shield Warranty

Mfr No. Description Part NumberCP120-1 MIG Welder 355 2RD WF 0708 2938CP120-3 MIG Welder 355 4RD WF 0708 2955

Weldmatic 396

• 395 amp MIG Welder for medium to heavy fabrication

• Fully enclosed W61 4RD wirefeeder

• Low easy access bottle tray• Dual front handles with easy

rubber grip• Digital meters with last weld

details displayed• Fan-on-demand™ cooling system• Made in Australia• 3 year Gold Shield Warranty

Mfr No. Voltage Range Part NumberCP126-1 415 55-395A 0125 1921

Weldmatic Fabricator – W19 Wirefeeder Package

• 400 amp MIG Welder for medium to heavy industrial fabrication

• Digital meters with last weld details displayed

• Fan-on-demand™ Cooling System• Low easy access bottle tray

for operator safety• 30 voltage steps for precise

welding control • Made in Australia• 3 year Gold Shield Warranty• Supplied as a complete package

containing: Weldmatic W19 2 roll drive open style wirefeeder, 10 metre composite cable interconnecting leads, Ar/CO

3 regulator fl owmeter, 10 metre work lead

and clamp, high quality Bernard gun with 3.6 metre cable and a 5 metre primary lead

• Medium to heavy industrial fabrication


Weldmatic Fabricator – W61 Wirefeeder Package

• 400 amp MIG Welder for medium to heavy industrial fabrication

• Digital meters with last weld details displayed

• Fan-on-demand™ Cooling System• Low easy access bottle tray

for operator safety• 30 voltage steps for precise welding control • Made in Australia• 3 year Gold Shield Warranty• Supplied as a complete package

containing: Weldmatic 4RD 4 roll drive full enclosed wirefeeder, 10 metre composite cable interconnecting leads, Ar/CO

2

regulator fl owmeter, 10 metre work lead and clamp, high quality Bernard gun with 3.6 metre cable and a 5 metre primary lead

• Medium to heavy industrial fabrication


MIG Machine Spares

MIG Machine Rollers

Mfr No. Description Part NumberW26-1/8 Steel 0.8 / 1.0mm 0286 1652W26-5/8 Steel 0.9 / 1.2mm 0286 1856W26-3/8 Aluminium 1.0 / 1.2mm 0285 6756W51-0/2 "V" Groove 0.8 / 1.0mm 0340 2812

Related Product

Zirconia Flap DiscsExcellent for grinding and finishing •

Long life, superior performance •

More cost effective •

No backing pad required•

Part Number 0152 1456 (102mm x 16mm 40 Grit)

See AbrasivesSection 05

72781_Chapter_04_D4.indd 04-14 8/10/09 11:23:06 AM

04



Multi Process Welders

Idealarc

Idealarc® DC-400• Is one of the world’s most recognised

multi-process welding machines• Withstood the test of time, even

in the harshest environments• Provides outstanding arc characteristics

on both constant current and constant voltage processes

• Provides great welding versatility in a single power source

The Idealarc® DC-600 • Multi-process DC arc welding power

source that produces outstanding arc characteristics in both constant voltage and constant current processes

• Designed for high productivity applications in MIG, FCAW, MMAW, TIG, SAW and carbon arc gouging (up to 10mm rods)

• Built for high performance and can handle 24 hour, 7 days a week operation

• The all weather protection and the submerged dipping of the transformer, choke and SCR assembly in a special epoxy-based sealing/insulating material provides extra long life and added protection from harsh environments such as salt air, moisture or corrosive atmospheres

• Any welding application where multiple processes are required, including MIG, FCAW, MMAW, TIG, SAW and carbon arc gouging

Mfr No. Description Part NumberKA1369-3 Idealarc DC-400 415V 0784 0594KA1342-1 Idealarc DC-600 415V 0784 0611

Powerwave

Power Wave® 405M• Features some of Lincoln Electric’s best

performance technologies and processes all rolled into one highly effi cient inverter power source designed for high-end semi-automatic welding

• Enabling processes such as Pulse-On-Pulse® and Power Mode™

• Precise control of process parameters allows you to weld on a variety of materials, including steel, Stainless Steel, aluminium and nickel alloys in virtually any application

• Optimise the arc for each wire type and size for a consistent weld time after time

Power Wave® 455M/STT® • Combine two revolutionary technologies into one

machine and you have the ability to obliterate welding-related barriers

• Delivers superior arc performance on a variety of materials, including steel, Stainless Steel, aluminium and nickel alloys, through custom control of the arc for each wire type and size

• Includes patented processes like Surface Tension Transfer® (STT®), Pulse-On-Pulse® and Power Mode™

• There is just no other multi-process welding power source with this kind of functionality and versatility

• Designed for challenging semi-automatic applications such as pipe welding, pressure vessels, Stainless Steel tanks, furniture and automotive to name a few. Suitable for all processes – MMAW, TIG, MIG, Pulsed, Synergic MIG, FCAW, Gouging

Mfr No. Description Part NumberK2369-1 Powerwave 405M 0784 0696K2203-2 Powerwave 455M/STT 0784 0713

KA1369-3

KA1342-1

K2369-1

K2203-2

Invertec

Invertec® V270-S• Stick and Lift TIG welder• Latest digital inverter technology

with excellent arc characteristics• Features built-in ‘Hot Start’ and

adjustable ‘Arc Force’ control enabling easy arc striking and smooth welding with most types of electrodes

• Built in VRD(Voltage reducing device)• 2 year parts and labour warrantyInvertec® V270-TP• Full function DC TIG with high

speed inverter technology• Adjustable pulse frequency • Built in VRD(Voltage reducing device)• Inverter power source that has smooth

TIG welding arc with a range between 5 and 270 amps

• This 14kg compact unit is an excellent choice for your stick welding requirements

• 2 year parts and labour warrantyInvertec® V350PRO• Utilising the optimum wave form for

each welding process and consumable• Its plug-and-play intelligence allows it to

automatically adjust to your Lincoln wire feeder and remote controls instantly

• Supplied "ready to weld" with LF72 wire feeder, magnum 400 gun, under carriage, remote voltage kit, regulator and all connecting cables

• 3 year parts and labour warranty• Any welding application where multiple

processes are required, including Stick, MIG and TIG

Mfr No. Description Part NumberV350PRO – STDPKG Invertec V350-PRO ready to weld package 0784 0679V270F-PKG Invertec V270S ready to weld package 0784 0526V270TP-PKG Invertec V270TP ready to weld package 0784 0543

Invertec STT

• Designed for challenging semi-automatic and automatic applications where spatter, smoke, heat input and penetration control is critical

• The revolutionary STT® process permits open gap root pass welding in pipe with greater ease of operation, better back beads and edge fusion, with less spatter and smoke than other available processes

• Used with a variety of welding consumables including mild steel, Stainless Steel, high nickel alloys and silicon bronze

• When using CO2 on mild and most alloy steels, the Invertec® STT II

produces less spatter than conventional GMAW with argon blends• Typical applications include: pipe welding, pressure vessels,

Stainless Steel tanks, furniture and automotive to name a few

Mfr No. Description Part NumberK1527-1 Invertec STT II 0784 0662

V350PRO

V270S

V270TP

72781_Chapter_04_D4.indd 04-15 8/10/09 11:23:08 AM

04



MIG Wire – Mild Steel

Autocraft LW1

• Suitable for welding of mild, low alloy and medium strength steels as used in general fabrication, pressure vessels and structural work

• High quality copper coated welding wire gives increased resistance to copper fl aking especially under high current welding conditions

• Premium quality low carbon steel wire for GMA welding

• All positional capabilities• Very low spatter levels important for welding light to medium gauge sheet,

pipe and tubular steel sections• Fillet welds exhibit a mitre to slightly concave profi le with an even

and smooth contour• Classifi cation AS: ES4-GC/M-W503AH

Mfr No. Description Range Part Number720115 0.9mm 15.0kg spool 70-230A 0817 3502720116 1.2mm 15.0kg spool 120-350A 0817 3609

Autocraft LW1 – 6

• Suitable for positional gas metal arc welding (GMAW) of mild and low alloy steels used in general fabrication and structural work

• High manganese/silicon steel wire for welding – use with CO

2

and Argon based shielding gases• Classifi cation AS: ES6-GC/M-W503AH

Mfr No. Description Range Part Number721104 0.6mm 0.8kg mini spool 35-100A 0029 1822721108 0.6mm 5.0kg handi spool 35-100A 0029 1873720103 0.6mm 15.0kg spool 35-100A 0501 9965721105 0.8mm 0.8kg mini spool 50-180A 0029 1839721109 0.8mm 5.0kgHandi Spool 50-180A 0029 1890720114 0.8mm 15.0kg spool 50-180A 0055 8400720161 0.9mm 5.0kg handi spool 70-230A 0653 3498720090 0.9mm 15.0kg spool 70-230A 0001 3192720094 1.0mm 15.0kg spool 100-280A 0085 3298720122A 0.9mm 250.0kg autopak 70-230A 0314 7523720123A 1.0mm 250.0kg autopak 100-280A 0120 3437720096 1.2mm 15.0kg spool 120-350A 0459 5557720124A 1.2mm 250.0kg autopak 120-350A 0098 9288720095 1.6mm 15.0kg spool 180-390A 0328 2113

MIG Wire – ER70S-6

• Solid wire for gas metal arc MIG welding

• For use with CO2 and Argon based

shielding gases• Precision layer wound for

smoother, easier use• Suitable for positional gas metal

arc welding of mild and low steel alloy steels, used for structural and general fabrication

• Classifi cations: ER70S-6 AS/NZS2717.1• ES6-GMW-503 AH• Approvals: Lloyds, AWS, ABS, TUV, CWB, DB

Mfr No. Description Part NumberA5.18.ER70S-6 0.9mm 15.0kg spool 0631 1529A5.18:ER70S-6 1.2mm 15.0kg spool 0631 1546JBS ER70S-6 0.9250 0.9mm 250.0kg Spool 0734 5724JBS ER70S-6 1.2250 1.2mm 250.0kg Spool 0734 5741

Austmig ES6

• Copper coated, low hydrogen, low carbon steel wire specially formulated for optimum performance under CO

2 and Argon/CO

2

mixed gases• Suitable for welding mild and medium

strength steels• Ideal for positional welding of sheet steel

and steel pipes/tubes where high silicon content promotes smooth even weld beads with excellent edge wetting and contour

• AS/NZS 2717.1:ES6 – GC – W503AH: ES6 – GM – W503AH• AWS A5.18: ER70S – 6

Mfr No. Description Part NumberES608S 0.8mm 15.0kg spool 0049 5618ES609S 0.9mm 15.0kg spool 0036 4463ES610S 1.0mm 15.0kg spool 0233 7063ES612S 1.2mm 15.0kg spool 0036 4480

MIG Wire – Aluminium

Autocraft AL4043

• Suitable for welding of selected wrought and cast aluminium alloys and the repair of many aluminium alloy castings

• Premium quality aluminium wire• Precision layer wound with patented lubrication

for superior wire feed• Classifi cation AS: E4043

Mfr No. Description Range Part Number722237 Aluminium MIG wire box 15.0kg 150 – 250A 0514 9307722238 1.6mm 7.0kg spool 200 – 350A 0092 2357

Autocraft AL5356

• Suitable for a range of wrought and cast aluminium alloys containing magnesium

• Aluminium/5% magnesium wire for GMA welding• Classifi cation AS: E5356

Mfr No. Description Range Part Number721221 0.8mm 0.5kg mini spool 50-150A 0029 1907722226 0.9mm 7.0kg spool 80-180A 0050 0753722224 1.0mm 7.0kg spool 110-220A 0066 8899722227 1.2mm 7.0kg spool 150-250A 0050 1059

Austmig 5356

• Precision layer wound Al/5%Mg wire• Suitable for welding wrought or cast

aluminium alloys containing magnesium as the major alloying element

• Suitable for welding selected grades of wrought Al/5%Mg alloys including 5083, 5086, 5454 and 5456

• AS 2717.2: E5356 and AWS A5.10:ER5356 Classifi cation

Mfr No. Description Part NumberM5356092KG 0.9mm 2.0kg spool 0119 3832M535609S 0.9mm 6.0kg spool 0037 1399M535610S 1.0mm 6.0kg spool 0036 4633M535612S 1.2mm 6.0kg spool 0489 6058M535616S 1.6mm 6.0kg Spool 0233 8964

72781_Chapter_04_D4.indd 04-16 8/10/09 11:23:10 AM

04



Superglaze

• Superglaze® products are manufactured to tight specifi cations on alloy chemistry and surface fi nish and are subject to rigorous control measures to assure quality

Superglaze® 4043• Used to weld heat-treatable base alloys

and more specifi cally the 6XXX series alloys• It has a lower melting point and more fl uidity

than the 5XXX series fi ller alloys and is preferred by welders because of its favourable operating characteristics

• ER4043 type wires are also less sensitive to weld cracking with the 6XXX series base alloys

• Suitable for sustained elevated temperature service, ie. above 65°C• AS 2717.2Superglaze® 5183• Designed to weld high magnesium alloys to meet higher

tensile strength requirements• Use on 5083 and 5654 base materials when required

tensile strengths are 276 MPa (40,000 psi) or greater• AS 2717.2Superglaze® 5356• 5% magnesium alloy wire providing high strength, ductility

and corrosion resistance for cast and wrought magnesium alloys• Excellent colour match after anodizing• Used across a full range of applications from home-handyman and farming

through to heavy industrial fabrication, typical applications are in the marine and cryogenic industries, and high strength structural aluminium fabrication

• AS 2717.2

Mfr No. Description Type Part NumberED028397A 1.2mm – 7.26kg spool 4043 0784 0492ED028398A 1.6mm – 7.26kg spool 4043 0784 0509ED028435A 0.9mm – 7.26kg spool 5183 0784 0458ED028437A 1.2mm – 7.26kg spool 5183 0784 0475ED030312 0.9mm – 0.45kg spool 5356 0784 1376ED028387A 1.2mm – 7.26kg spool 5356 0233 8868ED028388A 1.6mm – 7.26kg spool 5356 0784 0441

Austmig 5183

• Precision layer wound aluminium wire alloyed with Mg, Mn and Cr. Double shaved for superb feed ability

• Recommended for welding 5083 type material in the annealed condition

Mfr No. Description Part NumberM518312S 1.2mm 6.0kg spool 0139 1933

MIG Wire – Stainless Steel

Autocraft 308LSi

• Recommended for general welding of 201, 302, 321, 347, 409 and 444 Stainless Steels

• Steel wire for GMA welding of 304 and 304L Stainless Steels

• Classifi cation AS: ES308LSi

Mfr No. Description Range Part Number721271 0.9mm 15.0kg spool* 70-200A 0036 1845721272 1.2mm 15.0kg spool* 150-280A 0528 3861

*300mm diameter spool

Autocraft 309LSi

• Suitable for range of welding applications including the dissimilar joining of 300 Series and Stainless Steel grades to mild or low alloy steels

• Stainless Steel wire for the GMA welding of 309 and 309L type Stainless Steels


Mfr No. Description Range Part Number721276 0.9mm 15.0kg spool* 70-200A 0088 1926721277 1.2mm 15.0kg spool* 150-280A 0031 6256

*300mm diameter spool

Autocraft 316LSi

• Suitable for general welding of other 300 and 400 Series Stainless Steels including 301, 302, 304/304L, 321, 347, 410 and 430

• Steel wire for GMA welding of 16 and 316L Stainless Steels


Mfr No. Description Range Part Number721285 0.8mm 1.0kg mini spool 60-150A 0029 1924720283 0.9mm 5.0kg spool 70-200A 0079 6909721286 0.9mm 15.0kg spool 70-200A 0103 2555721287 1.2mm 15.0kg spool 70-200A 0111 2357

MIG Wire – Specialised

Autocraft Mn-Mo

• Suitable for all positional multi-pass welding of mild, low alloy and medium strength steels as used in general fabrication, pressure vessels and structural work

• Manganese molybdenum steel wire for GMA welding of higher strength steels

• Classifi cation AS: ESD2-GC/M-W559AH


Autocraft NiCrMo

• Suitable for all positional fi llet and butt welding of a range of high strength steels, particularly quenched and tempered types such as Bisalloy 80, USS-T1 types and Welten 80C

• Low alloy steel wire for GMA welding of high strength steels

• Use with welding grade CO2

or Argon based shielding gases• Classifi cation AS:

ESMG-GC/M-W769AH

Mfr No. Description Range Part Number720053 1.2mm 15.0kg spool 120-350A 0158 7458

72781_Chapter_04_D4.indd 04-17 8/10/09 11:23:13 AM

04



Austmig TD600

• Solid, copper coated, chromium alloy welding wire depositing weld metal with a hardness of nominal 55-60 HRC

• High resistance to severe abrasion and impact• Deposit is non-machinable but can be

shaped by grinding• AS/NZS 2576: 1855-B6 Classifi cation

Mfr No. Description Part NumberMTD60012S 1.2mm 15.0kg Spool 0311 6855

Tube-Alloy A43-0

• Premium self shielding wire depositing a high Cr/Nb surfacing alloy which resist severe high and low stress abrasion and low to moderate impact

• Weld deposit will check readily and can be used where high temperature wear resistance is required

• AS/NZS 2576: 2460-B7 Classifi cation

Mfr No. Description Part NumberS607719-029 1.6mm 11.3kg spool 0151 5115

Austfi l 71T-1M

• Flux-cored fabricated MIG wire for general purpose all positional welding of mild, carbon and carbon-magnese steels where excellent weld profi le and penetration is required

• Reduced production costs through higher deposition rates with excellent high integrity deposits

• AS/NZS ISO: 17632 B T 49 2 T1 1C A U H10 Classifi cation

Mfr No. Description Part Number71TM12S 1.2mm 15.0kg spool 0677 0087

Silicon Bronze MIG Wire


MIG Wire – Low Alloy Steels

Austmig ESD2

• Copper coated, all positional low alloy wire used for welding medium to higher strength steels, particularly where service temperatures up to 500°C are encountered

• Suitable for plain carbon and C-Mn steels, low alloy steels and higher strength steels as used in pressure vessels and boilers

• AS/NZS 2717.1: ESD2-GC – W559AH: ESD2-GM-W559AH AW A5.28: ER80S-D2

Mfr No. Description Part NumberESD209S 0.9mm 15.0kg spool 0119 3985ESD212S 1.2mm 15.0kg spool 0037 2844

MIG Wire – Flux-Cored

Verti-Cor 3XP

• Recommended for fl at mitre fi llet welds in all positions (except vertical down) on a range of mild and medium strength steels

• Micro-alloyed, Rutile type fl ux-cored wire• Versatile, all positional capabilities• Smooth arc transfer and slag lift• Grade 3 Shipping Society Approvals• Classifi cation AS: ETP-GMp-W503A CM1 H10 and ETP-GCp-W503A

CM1 H10


Verti-Cor 3XP H4

• Suitable for welding mild to medium strength steels• Seamless copper coated, Rutile type tubular

fl ux-cored designed for downhand, vertical up and overhead fi llet and butt welding applications

• Copper coated sheath improves current transfer, lessens consumable part wear and meets very low H4/H5 diffusible hydrogen status

• Classifi cation AS: ETP-GMp-W503A CM1 H5


Satin-Cor XP

• Designed for high productivity single and multi-pass welding of mild and medium strength steels

• Smooth running, Rutile type fl ux-cored wire for high speed fi llet and butt welding

• Flat, horizontal and horizontal-vertical positions• 1.6mm size uses either CO

2 or Argon +20-25% CO

2

• Classifi cation AS: ETD-GCp-W502A CM1 H10 and ETD-GMp-W503A CM1 H10 – 1.6mm only

Mfr No. Description Range Part Number720904 1.6mm 15.0kg spool 350-450A 0021 0392720906 2.4mm 25.0kg coil 400-550A 0026 9178

Verti-Cor Ultra

• Recommended for general steel construction and fabrication welding, where work cannot be rotated to the downhand position

• Designed for single and multi-pass welding of mild and medium strength steels in the downhand, vertical up and overhead positions

• Smooth running, all positional fl ux-cored wire which offers improved operator appeal, lower fume and spatter levels under welding grade carbon dioxide shielding gas

• Classifi cation AS: ETP-GCp-W502A CM1 H10


*Amperage dependent on weld position

72781_Chapter_04_D4.indd 04-18 8/10/09 11:23:16 AM

04



Verti-Cor XP

• Versatile, rutile type fl ux-cored wire designed for all positional fi llet and butt welding applications

• Using Argon + 20-25% CO2

and CO2 shielding gases offers outstanding

operator appeal and positional performance• Grade 3 Shipping Society Approvals

for both mixed gas and CO2

• Classifi cation AS: ETP-GMp-W503A CM1 H10 and ETP-GCp-W503A CM1 H10


*Amperage dependent on weld position

Verti-Cor 71T – Only in WA

• Precision Layer Wound (PLW) • Rutile type fl ux-cored wire formulated • For use with CO

2 shielding gas

• Versatile, all positional capabilities• Excellent operator appeal• Low spatter and fume levels• AS 2203.1 ETP-GCp-W502A. CM1 H10• AWS A5.20 E71T-1H8


Verti-Cor 81 Ni1

• Typical applications include under matching strength fi llet welding of Bisalloy 60, 70 and 80 quenched and tempered steels

• Higher strength low alloy steel rutile type fl ux-cored wire

• For use with Argon +20-25% CO

2 shielding gases

• Versatile all positional capabilities• Classifi cation AS: ETP-GMp-

W554A Ni1 H10


Verti-Cor 81 Ni1 H4

• Under matching strength fi llet welding of Bisalloy 60, 70 and 80 quenched and tempered steels

• Fillet and butt welding of higher strength steels in all welding positions except vertical down

• Copper coated seamless wire with very low hydrogen levels

• Formulated for use with Argon +20-25% CO

2 shielding gases

• Classifi cation AS: ETP-GC/Mp-W554A. Ni1 H5


Supre-Cor 5

• Suitable for a range of applications including fi llet and butt welding of pressure vessels

• For all welding applications where DC electrode negative operation is preferred

• Second generation fully basic fl ux-cored wire• Improved low temperature

impact toughness to -50°C• Classifi cation AS: ETP-GCn/p-W505A CM1 H5

and ETP-GMn/p-W505A CM1 H5


Supre-Cor XP H4

• Recommended for fi llet and butt welding of heavy earthmoving and mining equipment

• Tubular copper coated, fully basic fl ux-cored wire• Low temperature impact toughness to -20°C• Recommended for use with CO

2

and Argon +20-25% CO2

• Classifi cation AS: ETP-GCn/p-W504A CM1 H5 and ETP-GMn/p-W504A CM1 H5

Mfr No. Description Range Part Number720911 2.4mm 25.0kg coil 350-500A 0124 1456

Metal-Cor 5 H4

• Recommended for the high productivity welding of mild and medium strength carbon steels

• Next generation metal cored wire with similar deposition rates to solid wire

• Classifi cation AS: ETP-GMp-W504A. CM1 H5(1.2mm) and ETD-GMp-W504A. CM1 H5(1.6mm)


Metal-Cor XP

• Ideal for high productivity fi llet and butt welding of mild and medium strength carbon steels

• Full iron powder cored wire recommended for a range of high speed fi llet and butt welding applications in all downhand positions

• Low slag, high deposition effi ciency and rates• Grade 3 Shipping Society Approvals• Classifi cation AS: ETD-GCn/p-W503A CM1

H5 and ETP-GMn/p-W503A CM1 H5 (1.2mm only)

Mfr No. Description Range Part Number720912 1.2mm 15.0kg spool 280-350A 0204 0355720913 1.6mm 15.0kg spool 350-450A 0017 6511720913A 1.6mm 200.0kg spool 300-450A 0728 8927

72781_Chapter_04_D4.indd 04-19 8/10/09 11:23:18 AM

72781_Chapter_04_D4.indd 04-20 8/10/09 11:23:20 AM

04



Shield – Cor 8XP


Fluxofi l 42

• Seamless copper coated tubular construciton

• Very low hydrogen H5 class• Suitable for critical welding applications

Mfr No. Description Part NumberM4212S 1.2mm 15.0kg spool 0363 2652

Fluxofi l 11NI

• Rutile based, tubular seamless fl ux-cored wire

• Primarily used with CO2 shielding gas

to produce porosity free weld deposits in the down hand welding position

• General purpose, medium and heavy plate fabrication including road transport chassis, crane booms and girders etc

Mfr No. Description Part Number11NI16S 1.6mm 15.0kg spool 0037 8012

Fluxofi l 20

• Rutile based seamless fl ux-cored wire• All positional fi llet and butt

welding applications using CO2 or

Argon/18-25% CO2 shielding

mixed gases• Welding C-Mn steels, fi ne grained structural and pipe steels

Mfr No. Description Part Number2012S 1.2mm 15.0kg spool 0239 8690

Fabshield

NO GAS REQUIRED!• Self-shielding fl ux-cored wire used for

all positional welding of galvanised and mild steels

So what are the benefi ts of going gasless?• Save on gas bottle rental• Easy to use, self-shielding wire• Ideal for windy outdoor conditions when away from the workshop• Especially suited for galvanised, rusty or painted surfaces• Excellent weld appearance• All positional capability including vertical down• For mild/galvanised gates, fences, frames, sheds, prefab

building fabrications, ornamental ironwork and general fabrications• AWS A5.20: E71T-GS Classifi cation

Mfr No. Description Part NumberS222308-022 0.9mm 4.5kg spool 0079 0024S222308-029 0.9mm 15.0kg spool 0234 4768S222112-022 1.2mm 4.5kg spool 0060 4860S222112-029 1.2mm 15.0kg spool 0068 5083S222119-029 1.6mm 15.0kg spool 0073 3890S224529-014 2.4mm 22.7kg Spool 0037 1382

Flux-Cored Wire – Hardfacing

Stoody Super Build – G/O

• Recommended for semi-automatic, build-up and surfacing of steel track rolls, idler wheels, track pads, drive sprockets, pins, links and other components subjected to abrasion and/or metal-to-metal wear

• Tubular, hard surfacing wire designed for rebuilding or surfacing of steel components subjected to metal-to-metal wear and compressive loading

• Depositing a tough, air hardening, low carbon martensitic steel weld deposit, Stoody Super is machining carbide tools recommended

• Typical weld deposit hardness: Single layer on mild steel: 30 HRH, 300 HV30. All weld metal deposit: 35 HRH, 350 HV30

• Classifi cation AS: 1435-B5


Stoody 850 – O

• Self-shielded (-0) tubular hardfacing wire• Air hardening, crack prone high carbon,

martensitic steel deposit• Resistant to severe abrasion

and low impact loading• The hard-surfacing of agricultural, mining

and materials handling equipment including tynes, points, conveyor screws, dredge buckets, cane harvester cutter/elevators and sugar mill scraper plates



Stoody 965 – G

• Tubular hard surfacing wire for surfacing components subjected to wet or dry hard particle abrasion and low to moderate impact loading

• Air hardening martensitic steel weld deposit of 965-G remains crack free on most steels under normal welding conditions and is recommended for surfacing of components subject to fl exing during service

• Typical weld deposit hardness: Single layer on mild steel: 55 HRc, 600 HV 30. All weld metal deposit: 57 HRc, 640 HV 30

• Surfacing of agricultural points, shares and tynes, sand dredge cutter heads, dredge rollers and tumblers, conveyor screws and bucket lips


Mfr No. Description Range Part Number11423100 1.2mm 15.0kg 300m spool 120-220A 0014 237511501500 1.6mm 15.0kg 300m spool 140-250A 0061 941211946100 2.4mm 27.0kg coil 200-350A 0530 3256

Stoody 100 HC – O

• Self-shielded (-0) tubular hardfacing wire• High chromium carbide iron deposit for

ground engaging applications• Resistant to coarse abrasion and low

to moderate impact loading• Hard-surfacing of crusher cones and

mantles, swing hammers, earthmoving buckets, blades and rippers• Classifi cation AS: 2360-B7


72781_Chapter_04_D4.indd 04-21 8/10/09 11:23:24 AM

04



Stoody Dynamang – O

• Self-shielded (-0) tubular hardfacing wire• Tough, work hardening austentic

manganese steel deposit• Repair of manganese steel crusher rolls,

jaw and hammer crushers, gyratory mantles, blow bars and dredge pump cutters


Mfr No. Description Range Part Number11446700 1.6mm 15.0kg spool 200-250A 0379 624311249900 2.8mm 27.0kg coil 275-375A 0653 3702

Stoody Fineclad – O

• Self-shielded (-0) tubular hardfacing wire• Chromium iron carbides in a hard,

martensitic matrix• Resistant to fi ne, wet or dry abrasion• Surfacing of sand chutes, dredge

components, ripper shanks, screens, grizzly bars, scraper blades, and bucket teeth and lips



Stoody 101HC – G/O

• High alloy, tubular hardfacing wire• High chromium carbide iron deposit

for ground engaging applications• Resistant to severe abrasion and low

to moderate impact loading• Hard surfacing of crusher cones

and mantles, swing hammers, earthmoving buckets, scarifi er points and sugar harvesting and milling equipment

• Classifi cation AS: 2360-B5 (1.2mm) and 2360-B7 (1.6mm)

Mfr No. Description Range Part Number11436300 1.2mm 15.0kg spool 150-200A 0366 075311304700 1.6mm 15.0kg spool n/a 0142 4896

MIG Torches and Torch Spares

Torches – Up to 400 Amps

• Manufactured in the USA• Heavy duty construction• 400 amp air cooled at 60% duty cycle• Front and rear strain relief• Metal jacket conductor tube

Mfr No. Style Length m Connection Part Number717162 TWECO® No 2 3.6 TWECO® No 4 0107 4055717201 TWECO® No 4 3.6 TWECO® No 4 0092 2454717335 TWECO® No 4 4.5 TWECO® No 4 0356 3056OTWX412/3545 TWECO® No 4 3.6 Euro 0530 3353

Torches – Over 400 Amps

• Manufactured in the USA• Heavy duty construction• Front and rear strain relief• Metal jacket conductor tube

Mfr No. Style Length m Connection Part Number717211 TWECO® No 5 3.6 TWECO® No 5 0092 2556717212 TWECO® No 5 4.5 TWECO® No 5 0107 4152SE4004M16 Supra XT 4.0 TWECO® No 4 0514 9409

Contact Tips No.1 and Mini Guns

• Full range of high quality contact tips manufactured in the USA• High quality performance with outstanding tip life

Mfr No. Style Size mm Part NumberOTW11/23 Standard contact tip 0.6 0628 2819OTW11/30 Standard contact tip 0.8 0628 3012OTW11/35 Standard contact tip 0.9 0628 3119OTW11/40 Standard contact tip 1.0 0107 2552OTW11/45 Standard contact tip 1.2 0533 0465

Contact Tips No.2 and No.4


Mfr No. Style Size mm Part NumberOTW14/23 Standard contact tip 0.6 0107 2654OTW14/30 Standard contact tip 0.8 0320 7813OTW14/35 Standard contact tip 0.9 0320 8414OTW14/40 Standard contact tip 1.0 0107 2756OTW14/45 Standard contact tip 1.2 0320 8812OTW14/116 Standard contact tip 1.6 0107 2954OTW14T/35 Standard contact tip – tapered 0.9 0014 1134OTW14T/45 Standard contact tip – tapered 1.2 0014 1066OTW14H/35 Heavy duty contact tip 0.9 0107 2853OTW14H/40 Heavy duty contact tip 1.0 0125 2254OTW14H/45 Heavy duty contact tip 1.2 0988 7017OTW14H/116 Heavy duty contact tip 1.6 0092 2658OTW14H/564 Heavy duty contact tip 2.0 0017 5661717256 Heavy duty contact tip 1.2 Alum 0339 485614AH/116 Heavy duty contact tip 1.6 Alum 0142 7752

Contact Tips No.5


Mfr No. Style Size mm Part NumberOTW15H/35 Heavy duty contact tip 0.9 0092 2755OTW15H/45 Heavy duty contact tip 1.2 0092 2852OTW15H/116 Heavy duty contact tip 1.6 0107 3056OTW15H/564 Heavy duty contact tip 2.0 0107 3255OTW15H/332 Heavy duty contact tip 2.4 0107 3153OTW15H/764 Heavy duty contact tip 2.8 0107 3357717143 Heavy duty contact tip 1.2 Alum 0041 1536717149 Heavy duty contact tip 1.6 F/COR 0450 1855717275 Heavy duty contact tip 2 F/COR 0107 3556

72781_Chapter_04_D4.indd 04-22 8/10/09 11:23:28 AM

04



Contact Tips – Eliminator


Mfr No. Style Size mm Part NumberEL1635 Eliminator contact tip 0.9 0066 6536EL16T35 Eliminator contact tip 0.9 0066 6451EL1640 Eliminator contact tip 1.0 0066 6553EL1645 Eliminator contact tip 1.2 0066 6570

Nozzles No.1 and Twin 130

• Full range of high quality nozzles manufactured in the USA• Superior nozzle life made in the USA to TWECO®'s high standards

Mfr No. Description Style Part NumberOCE1311 Transmig 130 twin/wire wasp Standard nozzle 0377 8070OTW21/50/F TWECO 1 fi xed 13mm fl ush tip Standard nozzle 0102 3255OTW21/62/F TWECO 1 fi xed 16mm fl ush tip Standard nozzle 0017 1258

Nozzles No.2


Mfr No. Description Style Part NumberOTW22/50 Adjustable 13mm, 3mm recessed tip Standard nozzle 0320 9112OTW22/62 Adjustable 16mm, 3mm recessed tip Standard nozzle 0092 2953

Nozzles No.4


Mfr No. Description Style Part NumberOTW24A/50 Adjustable 13mm Standard nozzle 0107 3755OTW24A/62 Adjustable 16mm Standard nozzle 0320 9219OTW24AH/62 Adjustable heavy duty 16mm Standard nozzle 0339 4555OTW24AH/75 Adjustable heavy duty 19mm Standard nozzle 0017 5644717309 Spec tap 9.5mm 3mm rec tip Standard nozzle 0022 8735717532 CT nozzle tip 16mm fi xed Heavy duty nozzle 0339 4652717534 CT nozzle 16mm fi xed Heavy duty nozzle 0339 4754

Nozzles No.5


Mfr No. Description Style Part Number717538 CT nozzle 16mm fi xed Heavy duty nozzle 0092 3555717539 CT nozzle 19mm fi xed Heavy duty nozzle 0092 3657

Insulators

• High temperature rating for superior life expectance

• Full range of insulators made in the USA

Mfr No. Description Style Part NumberOTW32 Standard adjustable TWECO® No 2 0320 9316OTW34A Standard adjustable TWECO® No 4 0320 9510717540 Heavy duty fi xed for CT nozzle TWECO® No 4 0339 5054717541 Heavy duty fi xed for CT nozzle TWECO® No 5 0092 3754

Diffusers

• Superior gas distribution• Diffusers have a superior life expectance• Made in the USA

Mfr No. Description Style Part Number

717522 Gas diffuser mini gun TWECO® No 1 and mini guns 0107 4453

OTW51 Gas diffuser TWECO® No 1 and mini guns 0107 5956

OTW52 Gas diffuser TWECO® No 2 0320 9617OTW54A Gas diffuser TWECO® No 4 0320 9714OTW55SW Gas diffuser 0.9-1.6mm conduit TWECO® No 5 0092 3356OTW55 Gas diffuser 1.6-2.0mm conduit TWECO® No 5 0533 0664OTW55H Gas diffuser 2.4-2.8mm conduit TWECO® No 5 0172 6756

Liners

• Full range of liners for mild steel, Stainless Steel and aluminium applications

• Manufactured in the USA

Mfr No. Description Style Part NumberOTW42/3035 Conduit liner 4.5m 0.8-0.9mm hard TWECO® No 2 0066 7947OTW42/4045 Conduit liner 4.5m 1.0-1.2mm hard TWECO® No 2 0066 7964OTW42N/3545 Conduit liner 4.5m 0.9-1.2mm nylon TWECO® No 2 0066 7981OTW44/3545 Conduit liner 4.5m 0.9-1.2mm hard TWECO® No 4 0092 3152OTW44/564 Conduit liner 4.5m 2.0mm hard TWECO® No 4 0066 8032717344 Conduit liner 7.6m 0.9-1.2mm hard TWECO® No 4 0066 8083OTW44/116 Conduit liner 4.5m 1.6mm hard TWECO® No 4 0066 7998717347 Conduit liner 4.5m 0.9-1.2mm nylon TWECO® No 4 0066 8100OTW44N/116 Conduit liner 4.5m 1.6mm nylon TWECO® No 4 0066 8049OTW45/3545 Conduit liner 4.5m 0.9-1.2mm hard TWECO® No 5 0066 8134OTW45/564 Conduit liner 4.5m 2.0mm hard TWECO® No 5 0066 8151OTW45/116 Conduit liner 4.5m 1.6mm hard TWECO® No 5 0066 8117OTW45H/332 Conduit liner 4.5m 2.4mm hard TWECO® No 5 0066 8168

Torches

• Ergonomically designed• Heavy duty cable• German design strong and durable• Available in 3m and 4m lengths• Central adapter (Euro) connection• Ship building, trailer building, fabrication

and all general welding

Mfr No. Description Part Number002.0449 MB15AK 3m ergo handle 0679 9803002.0450 MB15AK 4m ergo handle 0679 9820004.0312 MB25AK 3m ergo handle 0808 1280004.0313 MB25AK 4m ergo handle 0808 1297012.0103 MB24KD 3m ergo handle 0808 1314012.0104 MB24KD 4m ergo handle 0683 9838014.0143 MB36KD 3m ergo handle 0808 1331014.0144 MB36KD 4m ergo handle 0679 9854034.0161 MB501D 4m ergo handle 0808 1960

72781_Chapter_04_D4.indd 04-23 8/10/09 11:23:31 AM

04



Torches With Fume Extraction

• Effi cient welding fume/smoke removal• Ergonomic handle with extraction control• Fume extraction without affecting gas shielding• Better accessibility – small extraction tube• Light weight – aluminium tube• Every MIG/MAG welding application on materials that generate hazardous fumes

if inhaled by the welder

Mfr No. Description Part Number612.2003 Fumex RAB24KD 4m large hose 0808 1926614.2003 Fumex RAB36KD 4m large hose 0808 1943

Torches Push-Pull

• Ergonomically designed• Ideal for hard-to-feed wires – aluminium• Pistol grip for easier handling• 8m of lead for greater access• German manufacturing• Robust construction• Ship building, trailer manufacturing and all fabrication

Mfr No. Description Part Number081.0033 PP26D 8m straight 0770 4543081.0035 PP26D 8m 45˚ bent 0770 4526083.0014 PP36D 8m straight 0770 4577083.0017 PP36D 8m 45˚ bent 0770 4560091.0043 PP401D 8m straight 0808 1348091.0044 PP401D 8m 45˚ bent 0808 1365

Nozzles

• High Quality• Precision manufactured• High quality copper content• Value for money• Durable design

Mfr No. Description Part NumberP145.0041 Nozzle cylindrical MB14/15AK x 2 0073 5539P145.0075 Nozzle conical MB14/15AK x 2 0033 5716P145.0042 Nozzle cylindrical MB25AK x 2 0808 1722P145.0076 Nozzle conical MB25AK x 2 0808 1756P145.0047 Nozzle cylindrical MB23/24KD x 2 0679 9514P145.0080 Nozzle conical MB23/24KD x 2 0033 5733P145.0045 Nozzle cylindrical MB36KD x 2 0041 1791P145.0078 Nozzle conical MB36KD x 2 0033 5563P145.0051 Nozzle cylindrical 26/501/38 x 2 0808 1739P145.0085 Nozzle conical 26/501/38 x 2 0808 1773

Diffusers/Nozzles Springs

• High quality• Precision manufactured• Durable design

Mfr No. Description Part NumberP002.0058 Nozzle spring MB14/15AK x 2 0679 9038P003.0013 Nozzle spring MB25AK x 2 0160 2354P012.0183 Diffuser MB23/24KD x 2 0033 5682P014.0261 Diffuser MB36KD x 2 0679 9497P030.0145 Diffuser MB501/PP401 x 2 0808 1552

Contact Tips

• High quality• Precision manufactured• Durable design• High quality copper

Mfr No. Description Part NumberP140.0008 0.6 M6 6mm x 5 0808 1569P140.0051 0.8mm M6 8mm x 5 0679 8953P140.0059 0.8 M6 6mm x 5 0684 1997P140.0169 0.9 M6 8mm x 10 0808 1586P140.0177 0.9mm M6 6mm x 10 0679 8919P140.0214 0.9 M8 x 10 0093 5561P140.0242 1.0 M6 8mm x 10 0033 3846P140.0253 1.0 M6 6mm x 10 0684 5295P140.0313 1.0 M8 x 10 0808 1603P140.0379 1.2 M6 8mm x 10 0033 4050P140.0442 1.2 M8 x 10 0033 5767P141.0004 0.9 M6 8mm A1 x 10 0808 1620P141.0005 0.9 M6 6mm A1 x 10 0808 1637P141.0006 1.0 M6 8mm A1 x 10 0808 1654P141.0015 1.2 M8 A1 x 10 0808 1671P141.0072 1.2 M6 8mm Al x 10 0033 4067

Contact Tip Holders

• High Quality• Precision manufactured• Durable design

Mfr No. Description Part NumberP002.0078 Nozzle holder MB15AK x 1 0679 9616P142.0001 Contact tip holder MB25AK x 2 0033 3948P142.0003 Contact tip holder MB24KD x 2 0033 4152P142.0005 Contact tip holder MB36KD x 2 0679 9021P142.0020 Contact tip holder MB36KD M8 x 2 0040 1489P142.0022 Contact tip holder 401/501D M8S x 2 0808 1705

Liners

• High Quality• Precision manufactured• Value for money• Durable design• Ship building, trailer manufacturing and all fabrication

Mfr No. Description Part NumberP124.0011 Liner insulation 3m blue x 1 0033 5053P124.0012 Liner insulation 4m blue x 1 0679 9752P124.0026 Liner insulation 3m red x 1 0033 4492P124.0031 Liner insulation 4m red x 1 0683 9821P141.K094 Aluminium wire kit 0.6-0.9mm 4m 0808 1688P141.K124 Aluminium wire kit 1.0-1.2mm 4m 0679 9786

Coolant Recirculators

• Sturdy compact design• Stainless Steel tank• Quick connect couplings to torches• Clear coolant sight glass• Incorporate fl ow cut-off switch• A portable cooling device for all MIG/MAG

and TIG welding applications that incorporate liquid cooled torches for high amperage/duty cycle requirements

Mfr No. Description Part Number850.0137 Water cooler WK23 240V 0808 1977

72781_Chapter_04_D4.indd 04-24 8/10/09 11:23:33 AM

04



Torches

Mfr No. Description Part NumberK2532-1 Spool Gun 100SG (Power MIG) 0770 3659K126 Magnum innershield gun 0285 4258K530-3 Magnum innershield gun 100L 0708 0592K10413-24-4M Linc gun LG240G 4m 0784 0033K10413-36-4M Linc gun LG360G 4m 0784 0050

Nozzles, Diffusers & Tip Holders

Mfr No. Description Style Part NumberKP1914-2 30˚ nozzle standard length K126 0286 4565KP1987-1 Nozzle assembly K126 0286 4154KP2089-1 Thread protector K126 0286 4764KP10461-4 12mm nozzle Pack of 10 LG240G 0784 0203KP10461-3 16mm nozzle Pack of 10 LG360G 0784 0220KP10404-WT Diffuser Pack of 10 LG240G 0784 0169KP10405-WT Diffuser Pack of 10 LG360G 0784 0186KP10455-1 Tip holder Pack of 10 LG240G 0784 0135KP10455-2 Tip holder Pack of 10 LG360G 0784 0152

Contact Tips

Mfr No. Description Size mm Part NumberKP11-30 Powercraft contact tip Pack of 10 0.8 0784 0934KP11-35 Powercraft contact tip Pack of 10 0.9 0784 0951KP14H-35 Powercraft contact tip Pack of 10 0.9 0285 2454KP2100-1B1 K126 contact tip 1.8 0286 4866KP2100-4B1 K126 contact tip 2.0 0286 5953KP2100-3B1 K126 contact tip 2.4 0286 6055KP10440-09 Contact tip M6 x 25 Pack of 10 0.9 0784 0067KP10440-12 Contact tip M6 x 25 Pack of 10 1.2 0784 0084KP10441-09 Contact tip M6 x 28 Pack of 10 0.9 0784 0101KP10441-12 Contact tip M6 x 28 Pack of 10 1.2 0784 0118

100SG

K126

100L

LG360G

LG240G

Torches

Mfr No. Amperage Length m Connection Part NumberBEQ3012AR7CE 390 3.6 Euro end 0119 4648BEQ3015AB7CE 390 4.6 Euro end 0119 4614BEQ4012AR7EM 440 3.6 Miller end 0651 6889BEQ3015AB7CE 390 4.6 Euro end 0119 4733BEQ3015AB7CE 390 4.6 Euro end 0119 4886BEQ4015AH7EM 440 4.6 Miller end 0119 4903

Nozzles

• Nozzles to suit Bernard MIG guns

Mfr No. Suits Type Part NumberBE4391 300/400A guns Brass with insulator 0037 2895BE4392 300/400A guns Brass tapered with insulator 0037 7553BE4491 300/400A guns Brass with insulator 0030 0067BE4492 300/400A guns Brass tapered with insulator 0037 7587BE4591 300/400A guns Copper with insulator 0037 7604BED-1T 300/400A guns TWECO® No 4 0764 2119BED-1T5 300/400A guns TWECO® No 5 0764 2136BE4592 300/400A guns Copper nozzle 0313 5334BEN-3414C 300/400A guns Large centrefi re nozzle 0685 8861BEN-5814C 300/400A guns Large centrefi re nozzle 0685 8844BEN-5818C 300/400A guns Large centrefi re nozzle 0685 8827BENS-1218C 300/400A guns Small centrefi re nozzle 0685 8793BENS-5818C 300/400A guns Small centrefi re nozzle 300A 0685 8810BE4391 300/400A guns Straight nozzle 300A 0404 1179

Contact Tips

• Long lasting performance

Mfr No. Description Size mm Part NumberBE1590 Contact tip (0.045") 1.2 0029 9965BE7498 Contact tip (0.051") 1.3 0038 5288BE1591 Contact tip (1⁄16") 1.6 0072 4438BE7492 Contact tip (5⁄64") 2.0 0097 7626BET-035 Contact tip centrefi re 0.9 0685 7433BET-039 Contact tip centrefi re 1.0 0685 8725BET-045 Contact tip centrefi re 1.2 0685 8742BET-052 Contact tip centrefi re 1.4 0685 8759BET-062 Contact tip centrefi re 1.6 0685 8776BE7488 Contact tip 0.8 0402 7749BE7489 Contact tip 0.9 0402 7766BE7490 Contact tip 1.2 0402 7783BE7491 Contact tip 1.6 0404 1468BE7497 Contact tip 0.6 0637 5364BE7496 Contact tip for MIG gun 1.0 0049 5686BE1589 Contact tip for MIG gun 0.9 0313 5385BE1593 Contact tip for MIG gun 2.4 0343 4670

72781_Chapter_04_D4.indd 04-25 8/10/09 11:23:38 AM

72781_Chapter_04_D4.indd 04-26 8/10/09 11:23:40 AM

04



Transtig 300 AC/DC

• Save load (recall) weld programs• Duty cycle: 25% @ 300 amps• HF start TIG, Lift TIG and Stick

weld operations• DC TIG mode capable of welding mild

steel and Stainless Steel• AC TIG mode capable of welding aluminium• Easy to use digital display and panel controls• Supplied with power source, two Dinse

plug connectors, inlet gas fi tting and operating manual

• VRD compliant to AS/NZS 3195 and IEC60974-1• Conforms to AS 1674.2



700723 Transtig 300 AC/DC power source 415 5 – 300 0412 5771

Transtig 300Pi

• Save load (recall) weld programs• Duty cycle: 30% @ 300 amps• HF start TIG, Lift TIG and Stick weld operations• Self diagnostic control• DC TIG mode capable of welding mild

steel and Stainless Steel• Exceptional DC welding characteristics• Supplied with power source, two Dinse

plug connectors, inlet gas fi tting and operating manual

• VRD compliant to AS/NZS 3195 and IEC60974-1• Conforms to AS 1674.2



700722 Transtig 300Pi power source 415 5 – 300 0412 5754

Weldskill 170HF

• 240 volt input, 15 amp supply lead• 5 – 170 amp output range• High frequency start• Fan cooled• Over temperature cut-out• Maximum electrode size 4.0mm• Australian standards compliance• 1 Year Warranty


Supply Amperage


W1003001 Weldskill 170 HF plant 240 15 5 – 170 0776 4485

Syncrowave 250DX

• AC/DC TIG/Stick Welder ideal for fabrication shops and vocational training facilities

• 3-310 amp output• Squarewave AC with balance control• Syncro-Start™

• Fan-on-demand™ Cooling System


Supply Amperage


MR907197 415 10 5 – 310 0286 1157

TIG & Gas Welding Rods - Mild & Alloy Steels

Comweld Mild Steel

• Recommended for gas welding of steels and wrought irons• Black annealed, low carbon steel rod for oxy-acetylene welding• Not suitable for gas tungsten arc (TIG) welding• Classifi cation AS: RG


Comweld High Test

• Recommended for higher strength (400-450MPa) oxy-acetylene and TIG welding of steels

• Copper coated, steel fi ller rod suitable for gas and TIG welding• Produces a free fl owing weld pool• Classifi cation AS: R1


Comweld LW1

• Copper-coated steel fi ller rod suitable for gas and TIG welding• Double deoxidised to improve the weld deposit quality• Tolerant to surface rust and mill scale and produces tough/ductile welds• Deposited welds are in the 500MPa tensile class• Classifi cation AS: R4

Mfr No. Description Part Number321411 1.6mm 5.0kg tube* 0530 2163321412 2.4mm 5.0kg tube* 0156 3757

*Resealable tube

Comweld LW1 – 6

• Copper coated, low carbon steel rod for gas, TIG and oxy welding• Recommended for TIG welding of steel pipes, plates and castings• Tensile strength in the 500MPa class• Classifi cation AS: R6


*Resealable tube

Comweld Super Steel

• Ideal for TIG welding rusty or mill scaled plates/pipes and the root pass welding of pipes, tanks and heavy walled joints

• Low carbon steel fi ller rod for gas tungsten arc (TIG) welding• Triple oxidised for superior weld deposit quality and resistance to porosity• Classifi cation AS: ER702-S


72781_Chapter_04_D4.indd 04-27 8/10/09 11:23:44 AM

04



Comweld CrMo1

• For gas tungsten arc (TIG) welding of matching Cr-Co creep resistant steels for elevated temperature and corrosive service

• Nominal 1 1⁄4 Cr 1⁄2 Mo steel TIG rod• Classifi cation AS: ER80S-B2

Mfr No. Description Part Number321379 2.4mm 5.0kg tube 0442 8556

Comweld CrMo2

• For gas tungsten arc (TIG) welding of Cr-Mo and Cr-Mo-V creep resistant steels for elevated temperature and corrosive steels

• Nominal 2½Cr 1Mo steel TIG rod• Classifi cation AS: ER80S-B2

Mfr No. Description Part Number321383 2.4mm 5.0kg tube 0442 8454

Comweld 308L

• Recommended for critical welding of 304 and 304L Stainless Steels in corrosion and cryogenic applications

• High quality, low carbon Stainless Steel rod for gas tungsten arc (TIG) welding of a range of stabilised 300 Series Stainless Steels

• Classifi cation AS: ER308L


*Resealable tube

Comweld 309L

• Suitable for dissimilar joining of other 300 Series austenitic Stainless Steels to ferritic steels

• High quality, low carbon rod or gas or gas tungsten arc (TIG) welding of highly alloyed 309 or 309L type Stainless Steels



*Resealable tube

Comweld 316L

• Suitable for general welding of other 300 Series Stainless Steels including 302 and 304 as well as ferritic Stainless Steel grades such as 409, 444 and 3Cr12

• High quality, low carbon rod for gas or gas tungsten arc (TIG) welding of molybdenum bearing Stainless Steels in particular 316 and 316L alloys



*Resealable tube

TIG & Gas Welding Rods – Aluminium

Comweld AL1100

• Pure (99.88% min.) aluminium rod suitable for gas and TIG welding of high purity wrought (IXXX Series) aluminium alloys

• Classifi cation AS1167.2 R1100


Comweld AL4043

• For repair welding (fractures and blow holes) of selected alloy castings• Suitable for gas welding and gas tungsten arc (TIG) welding• Aluminium – 5% silicon alloy rod• Classifi cation AS: R4043


Comweld AL4047

• Ideal for gas and TIG welding and brazing of many types of aluminium alloy sheets, extruded shapes and castings

• Al/10% silicon alloy rod• Classifi cation AS: R4047


Comweld AL5356

• Produces intermediate deposit strength, good ductility and corrosion resistance for welding of range of 3XXX, 5XXX, 6XX and 5XX aluminium alloys

• Suitable for gas welding and gas tungsten arc (TIG) welding• Aluminium – 5% magnesium alloy rod• Classifi cation AS: R5356


TIG Torches & Torch Spares

TIG Torches

• 17V style TIG torch• 3m power cable• 1m gas hose• Gas valve• 50mm Dinse connector• Accessories kit

Mfr No. Description Part NumberW7003021 17V 3m fl ex head torch to suit Weldskill 170 0776 4451W7003006 17V 3m fl ex head torch to suit Weldskill 130 0776 4468

72781_Chapter_04_D4.indd 04-28 8/10/09 11:23:48 AM

04



Torches

• Air cooled TIG Torches• Designed for operator appeal• Lightweight and robustKEY1 – Nozzle2 – Collet Body3 – Gas Lens Nozzle4 – Gas Lens5 – Gas Lens Insulator6 – Collets7 – Cup Gasket8 – Torch Head Rigid9 – Long Back Cap10 – Stubby Back Cap

Mfr No. DescriptionTorch Head Type

Torch Switch

Gas Valve Part Number

304710402 190A 4m Rigid Yes No 0345 9201305710402 190A 4m Rigid No Yes 0345 9252309710402 190A 4m Flexible No Yes 0345 9269304720401 250A 4m Rigid Yes No 0345 9303305720401 250A 4m Rigid No Yes 0345 9337308720401 250A 4m Flexible Yes No 0345 9405404710402 17v 2m Suits T/Arc Yes Yes 0577 3564

Alumina TIG Nozzles

• Designed for more critical TIG welding applications

• TIG torch gas lens nozzles, built with quality

Mfr No. Description Part NumberBG10N49/R 8.0mm TIG 17, 18 and 26 torches Pack of 5 0483 5436BG10N48/R 10.0mm TIG 17, 18 and 26 torches Pack of 5 0483 5419BG10N47/R 11.0mm TIG 17, 18 and 26 torches Pack of 5 0483 5402BG10N46/R 12.5mm TIG 17, 18 and 26 torches Pack of 5 0483 538510N48 10.0mm TIG 17, 18 and 26 torches 0483 499410N47 11.0mm TIG 17, 18 and 26 torches 0483 497710N46 12.5mm TIG 17, 18 and 26 torches 0483 4960379103106/R 10.0mm 17, 18 and 26 torches 0488 8816379103107/R 11.0mm 17, 18 and 26 torches 0483 4790379103108/R 12.5mm 17, 18 and 26 torches 0483 480754N14 12.5mm 17, 18 and 26 torches 0483 5164

TIG Torch Accessory Kit

• Suits all torch models 17, 18 and 26• Supplied with 3 alumina cups – 46.1mm

long, 6.25mm, 7.8mm and 9.4mm orifi ce; 3 tungsten electrodes – 1mmG2, 1.6mmG2 and 2.4mmG2; 3 collet bodies – 1mm, 1.6mm and 2.4mm; 3 collets – 1mm, 1.6mm and 2.4mm; 1 short back cap

Mfr No. Description Part NumberBGSAK2 TIG torch accessory kit 0338 5454

304720401

309720401

Collets Bodies

• Standard TIG torch collet body

Mfr No. Description Part NumberBG10N30/R 1.0mm TIG 17, 18 and 26 torches 0483 5334BG10N31/R 1.6mm TIG 17, 18 and 26 torches 0483 5351BG10N32/R 2.4mm TIG 17, 18 and 26 torches 0483 5368BG10N28/R 3.2mm TIG 17, 18 and 26 torches 0483 5317BG406488/R 4.0mm TIG 17, 18 and 26 torches 0483 5470

Collets

• TIG torch collets quality and durable

Mfr No. Description Part NumberBG10N22/R 1.0mm TIG 17, 18 and 26 torches 0483 5249BG10N23/R 1.6mm TIG 17, 18 and 26 torches 0483 5266BG10N24/R 2.4mm TIG 17, 18 and 26 torches 0483 5283BG10N25/R 3.2mm TIG 17, 18 and 26 torches 0483 5300

Gas Lens Collet Bodies

• Designed for more critical TIG welding applications• TIG torch gas lens insulators, built with quality

Mfr No. Description Part Number314102016/R 1.6mm TIG 17, 18 and 26 torches 0514 9528314102024/R 2.4mm TIG 17, 18 and 26 torches 0514 9545314102032/R 3.2mm TIG 17, 18 and 26 torches 0514 9579314102040/R 4.0mm TIG 17, 18 and 26 torches 0514 9596

TIG Back Caps – Stubby & Long

• TIG torch back caps, built with qualityStubby Back Cap• Designed for the tight areas and where space is an issueLong Back Cap• Designed for long tungstens

Mfr No. Description Part NumberBG57Y04/R Stubby TIG 17, 18 and 26 torches 0483 5538BG57Y02/R Long TIG 17, 18 and 26 torches 0051 088457Y02 Long TIG 17, 18 and 26 torches Pack of 20 0483 5215

Tungsten Electrodes – Zirconiated, Thoriated & Ceriated

• TIG welding tungstens fi t for purposeZirconiated• For aluminium magnesiumThoriated• For mild steel, Stainless SteelCeriated• For all purpose

Mfr No. Description Style Part NumberVB1692 1.6mm AC white tip Zirconiated 0097 4457VB1693 2.4mm AC white tip Zirconiated 0097 4554VB1694 3.2mm AC white tip Zirconiated 0962 5716VB1702 1.0mm DC red tip Thoriated 0103 5455VB1703 1.2mm DC red tip Thoriated 0107 1955VB1704 1.6mm DC red tip Thoriated 0818 4106VB1705 2.4mm DC red tip Thoriated 0818 4203VB1706 3.2mm DC red tip Thoriated 0818 4300699846 1.6mm AC/DC grey tip Ceriated 0081 9026699847 2.4mm AC/DC grey tip Ceriated 0081 9009699848 3.2mm AC/DC grey tip Ceriated 0514 9613

BG57Y02/R

72781_Chapter_04_D4.indd 04-29 8/10/09 11:23:50 AM

04



Torches

• Available in 4m and 8m lengths• Standard SR9V or SR17 consumables• Value for money• Durable design• Ship building, trailer manufacturing and all fabrication

Mfr No. Description Part Number7R9V-4-1025 AlphaTIG 9V 4m 1025 0338 52617R9V-8-1025 AlphaTIG 9V 8m 1025 0808 15357R17V-4-1025 AlphaTIG 17V 4m 1025 0680 01607R17V-4-3550 AlphaTIG 17V 4m 3550 0808 14847R17V-8-1025 AlphaTIG 17V 8m 1025 0808 15017R17V-8-3550 AlphaTIG 17V 8m 3550 0808 1518

Collets

• High quality• Precision manufactured• High quality copper content• Durable design

Mfr No. Description Part NumberP701.0251 13N22 collet 1.6mm x 2 0338 6356P701.0252 13N23 collet 2.4mm x 2 0338 9455P701.0253 13N24 collet 3.2mm x 2 0808 1790P702.0008 10N23 collet 1.6mm x 2 0338 5852P702.0009 10N24 collet 2.4mm x 2 0546 2226P702.0010 10N25 collet 3.2mm x 2 0338 6055

Collets Bodies/Gas Lenses

• High quality• Precision manufactured• High quality copper content• Value for money• Durable design

Mfr No. Description Part NumberP701.0276 13N27 collet body 1.6mm x 2 0339 0156P701.0277 13N28 collet body 2.4mm x 2 0339 0258P701.0278 13N29 collet body 3.2mm x 2 0808 1807P701.0307 45V43 collet body – Gas lens 1.6mm x 1 0073 9806P701.0309 45V44 collet body – Gas lens 2.4mm x 1 0073 9840P701.0311 45V45 collet body – Gas lens 3.2mm x 1 0808 1824P701.0191 10N31 collet body 1.6mm x 2 0679 9871P701.0196 10N32 collet body 2.4mm x 2 0546 2209P701.0197 10N28 collet body 3.2mm x 2 0338 9956P701.0203 45V25 collet body – Gas lens 1.6mm x 1 0684 5346P701.0207 45V26 collet body – Gas lens 2.4mm x 1 0546 2243P701.0209 45V27 collet body – Gas lens 3.2mm x 1 0073 9857

Torch Bodies

• High quality• Precision manufactured• Flexible neck• Durable design

Mfr No. Description Part NumberP703.0001 Torch body SR9FX X1 0808 1909P703.0010 Torch body SR17FXV X1 0485 1739P705.0007 Torch body SR9V X1 0680 0007P705.0033 Torch body SR17 X1 0679 9888P705.0038 Torch body SR17V X1 0679 9905

Ceramic Nozzles


Mfr No. Description Part NumberP701.0109 10N48 ceramic gas nozzle no.6 x 2 0339 0753P701.0110 10N47 ceramic gas nozzle no.7 x 2 0339 0656P701.0111 10N46 ceramic gas nozzle no.8 x 2 0339 0855P701.0317 53N58 ceramic nozzle gas lens no.4 x 2 0808 1841P701.0318 53N59 ceramic nozzle gas lens no.5 x 2 0485 1637P701.0319 53N60 ceramic nozzle gas lens no.6 x 2 0485 1654P701.0422 54N16 ceramic nozzle gas lens no.6 x 2 0529 8756P701.0423 54N15 ceramic nozzle gas lens no.7 x 2 0141 6243P701.0424 54N14 ceramic nozzle gas lens no.8 x 2 0073 9925P701.0282 13N09 ceramic gas nozzle no.5 x 2 0338 6754P701.0283 13N16 ceramic gas nozzle no.6 x 2 0338 6856P701.0284 13N11 ceramic gas nozzle no.7 x 2 0338 6957

Back Caps


Mfr No. Description Part NumberP701.0240 41V33 back cap S 9/20 x 1 0037 2606701.0244 41V35 back cap M 9/20 x 1 0037 2623P701.0247 41V24 back cap L 9/20 x 1 0037 2589P712.1051 57Y02 back cap Long x 1 0066 5941P712.1053 57Y04 back cap Short x 1 0037 2674

Tungsten Electrodes – Zirconiated, Thoriated & Ceriated

• All tungstens are 175mm long• High quality• Copper coated gouging

carbons – Pointed • Excellent arc stability, superior

metal removal rates, uniform diameter and grooves are clean/slag free

• Ship building, trailer manufacturing and all fabrications

Mfr No. Description Part Number700.0030 Tungsten 0.8% zirconia 1.6mm 0680 0092700.0034 Tungsten 0.8% zirconia 2.4mm 0680 0109700.0036 Tungsten 0.8% zirconia 3.2mm 0647 0853700.0080 Tungsten 2% thoriated 1.6mm 0680 0058700.0090 Tungsten 2% thoriated 2.4mm 0647 0887700.0099 Tungsten 2% thoriated 3.2mm 0680 0075700.0167 Tungsten 2% ceriated 1.6mm 0808 1382700.0169 Tungsten 2% ceriated 2.4mm 0808 1399700.0170 Tungsten 2% ceriated 3.2mm 0808 1416700.0196 Tungsten 2% lanthanum 1.6mm 0808 1433700.0198 Tungsten 2% lanthanum 2.4mm 0808 1450700.0200 Tungsten 2% lanthanum 3.2mm 0808 1467

CeriatedThoriatedZirconiated

72781_Chapter_04_D4.indd 04-30 8/10/09 11:23:53 AM

72781_Chapter_04_D4.indd 04-31 8/10/09 11:23:58 AM

04



Barrels

Barrels

Heating Tip3070070389 9205

Radius Bar3087520806 7702

LPG Swaged Welding Tips

0377 0029

Air-Acetylene Brazing TipAT490514 9647

Roller Guide 3087290806 7809

Acetylene Swaged Welding Tips

Acetylene Heating Tips

SHA13071210363 7242

LPG Heating Tips

LPG Heating Tips

SHP13071200808 2101

SHP33071180033 1456

SHA23071220808 2402

SHP23071190033 1354

SHP43071170530 2059

0514 9630

Nozzles

Heating(Acet)

Heating(LPG)

Rivet

Gouging(Acet)

SheetMetal

Cutting(LPG)

Cutting(Acet)

Gouging(Acet)

Gouging(LPG)

Gas Equipment Kits

Size 32 307006

Size 26 307005

Size 20 307004

Size 4 307056

Size 6 307057

Size 8 307000

Size 10 307001

Size 12 307002

Size 15 307003

0808 3304

0808 1607

0808 3401

0441 7156

0441 7253

0808 1209

0808 1306

0808 1403

0808 1500

450mm 307124

700mm 307125735mm 307123

0814 11070814 09040814 1000

450mm 307124700mm 307125735mm 307123

0814 11070814 09040814 1000

Size 8 307068

Size 15 307059

72781_Chapter_04_D4.indd 04-32 8/10/09 11:24:04 AM

04



Mixer 10mm (3/8”)Type 550 3040020813 8204

Genuine COMET™ 3 Cutting Attachment (Multi Fuel)3040050806 7401

Mixer 10mm (3/8”)Type 550 3040020813 8204

Mixer 13mm (1/2”)Type 570 3040030813 8301

Injector 13mm (1/2”)LP Gas/Natural GasType 574 3041660813 8408

CUTTING

GOUGINGHEATING

HEATING

SUPER HEATING

SUPER HEATING

WELDING

Gas Cutting Kits

COMET 3 Blowpipe

• When used with appropriate attachments is suitable for fusion welding, brazing, soldering, heating, hand cutting, sheet metal cutting, rivet cutting and fl ame cleaning

Mfr No. Description Part Number304001 COMET 3 blowpipe 0806 7003

COMET Cutting Nozzles – Type 40

• Standard speed cutting nozzles for use with oxy-acetylene or oxy-LPG

Mfr No. Tip SizeSteel Thickness mm Style Part Number

306046 6 1 – 6 Type 41 – Oxy-acetylene 0807 5008306047 8 6 – 10 Type 41 – Oxy-acetylene 0807 5105306048 12 12 – 20 Type 41 – Oxy-acetylene 0807 5202306049 15 25 – 75 Type 41 – Oxy-acetylene 0447 5505306050 20 100 – 125 Type 41 – Oxy-acetylene 0807 5406306051 24 150 – 200 Type 41 – Oxy-acetylene* 0807 5503306052 32# 225 – 300 Type 41 – Oxy-acetylene* 0807 5600306053 48# 300 – 400 Type 41 – Oxy-acetylene* 0807 5804306067 6SM Sheet metal Type 41 – Oxy-acetylene 0807 2506306076 15RC Rivet cut Type 41 – Oxy-acetylene 0807 2409306025 6 3 – 6 Type 44 – Oxy-LPG 0807 3709306026 8 6 – 12 Type 44 – Oxy-LPG 0807 3806306028 12 12 – 20 Type 44 – Oxy-LPG 0807 3903306029 15 25 – 75 Type 44 – Oxy-LPG 0807 4009306030 20 100 – 125 Type 44 – Oxy-LPG* 0829 5202306031 24 150 – 200 Type 44 – Oxy-LPG* 0807 4203306032 32 225 – 300 Type 44 – Oxy-LPG* 0807 4300

* Manufactured from copper# For use with COMET Multi-Purpose Cutting Torch only

COMET Gouging Nozzles – Type 40

• For use on COMET 3 Multi-purpose and Sabre cutting torches

Mfr No. Description Tip Size Style Part Number306035 Bent 32GB Type 41 – Oxy-acetylene 0806 9904306036 Bent 48GB# Type 41 – Oxy-acetylene* 0807 0003306037 Bent 64GB# Type 41 – Oxy-acetylene* 0807 0100306038 Straight 32GS Type 41 – Oxy-acetylene 0829 5105306033 Straight 32GS Type 44 – Oxy-LPG 0829 5309306054 Bent 32GB Type 44 – Oxy-LPG 0807 3408306055 Bent 48GB# Type 44 – Oxy-LPG 0807 3505306056 Bent 64GB# Type 44 – Oxy-LPG 0807 3602

*Manufactured from copper#For use with COMET Multi-Purpose Cutting Torch only

COMET Superheating Barrels

• Tubular Stainless Steel construction gives excellent strength and heat conductivity• Screw fi ttings ensure an easy leak-free connection between mixers

and a superheating tip

Mfr No. Description Length mm Part Number307123 Straight barrel 735 0814 1000307125 Gooseneck barrel 700 0814 0904307124 Gooseneck barrel 450 0814 1107

72781_Chapter_04_D4.indd 04-33 8/10/09 11:24:08 AM

04



COMET Professional Plus Gas Kit

• Complete kit containing everything the professional tradesman could possibly want with respect to gas cutting, welding and heating equipment

• COMET regulators have the GasGuard™ safety feature

• Supplied in a toolbox• Supplied with F6 fl ashback arrestors,

roller guide, heating tip (size 8 x 12 HT), 5 welding tips (Size 8, 10, 12, 15, 20), 4 cutting nozzles (Size 6, 8, 12, 15) and accessories

Mfr No. Description Part Number308313 COMET Professional plus gas kit 0824 2307

COMET Commander Gas Kits

• Choice for those who want to replace or update existing COMET equipment range and may already have the extra components supplied in the Professional Plus kit

• Available in either oxy-acetylene or oxy-LPG versions

• Supplied in a toolbox• Supplied with 4 welding tips

(Size 8, 10, 12, 15), 4 cutting nozzles (Size 6, 8, 12, 15) and accessories

Mfr No. Description Part Number308314 COMET Commander gas kit Oxy-acetylene 0107 8255308345 COMET Commander gas kit Oxy-LPG 0345 9099

COMET Starter Gas Kits

• For those who require the basic components for gas cutting and welding

• Available in either oxy-acetylene or oxy-LPG versions

• Supplied in toolbox• Supplied with gas hose, a cutting nozzle

(Size 12), and a welding tip (Size 12 Acetylene – Size 15 LPG)

Mfr No. Description Part Number308315 COMET Starter gas kit Oxy-acetylene 0146 6308308316 COMET Starter gas kit Oxy-LPG 0073 4315

CutSkill Tradesman Gas Cutting & Welding Kit

• Designed for oxygen and acetylene general purpose gas cutting and welding applications

• Tough solid brass construction• Flashback resistant mixer• Excellent fl ame stability• Supplied in a toolbox• General purpose kit provides you with all

the components necessary to complete that Oxy-Acetylene gas cutting or welding job

• Includes: Cutskill 600 Oxygen regulator, Cutskill 600 Acetylene regulator, Cutskill blowpipe, Cutskill cutting attachment, 3 cutting nozzles (Sizes 8, 12 and 15), 3 welding tips (Sizes 8, 12 and 15), twin welding hose (5m), heavy duty tool box, gas welding goggles, combination spanner, fl int lighter

• Oxygen and Acetylene regulators conform to AS 4267

Mfr No. Description Part Number208001 Tradesman Gas Kit Cutskill Oxy-Acetylene 0651 4866208007 Tradesman Plus Gas Kit Cutskill Oxy-Acetylene 0678 8413208011 Tradesman Gas Kit Cutskill Oxy-LPG 0770 4696

Related Product

Kevlar® Stitched Blue Welding Gloves

Superior quality, heavy duty protection •

Reinforced palm thumb and knuckle guard •

Selected 1st grade butt leather •

Fully lined •

Sewn with Kevlar® thread •

Wear seams welted for extra strength •

Length – 406mm•

Part Number 0493 4354

See Safety – PPE Section 07

208001

208007 208011

72781_Chapter_04_D4.indd 04-34 8/10/09 11:24:10 AM

04



COMET LPG Conversion Kit

• COMET 3 equipment performs as well on LPG as it does on acetylene all you need to do is change the regulator, nozzle and hose from acetylene to LPG

Brazing will occur if you fusion weld with mild steel (black) wire using oxy-LPG

Mfr No. Description Part Number308134 COMET Conversion kit LPG 0345 9116

Related Product

Welders’ Leather JacketPremium grade chrome leather •

Metal press stud opening (two rows) •

Standard length: 760mm •

Sewn with Aramid thread •

Protection against welding spatter, • dross and radiant heat

Part Number 0417 4714 (XL)

See ClothingSection 09

LPG Gas Nozzles

Mfr No. Type Size Part Number306125 Acetylene H/S 0 0107 7756306126 Acetylene H/S 1 0107 7858306127 Acetylene H/S 2 0107 7954306128 Acetylene H/S 3 0107 8056306129 Acetylene H/S 4 0107 8158306130 Acetylene H/S 5 0028 0755306114 Acetylene STD 00 0092 4156306115 Acetylene STD 0 0092 8157306116 Acetylene STD 1 0092 8254306117 Acetylene STD 2 0092 8356306118 Acetylene STD 3 0092 8458306119 Acetylene STD 4 0092 8555306120 Acetylene STD 5 0049 1079306121 Acetylene STD 6 0340 3084306104 LPG H/S 00 0107 7557306106 LPG H/S 1 0093 1055306107 LPG H/S 2 0093 1157306108 LPG H/S 3 0093 1254306109 LPG H/S 4 0093 1356306110 LPG H/S 5 0093 1458306111 LPG H/S 6 0093 1555306097 LPG STD 0 0092 7653306098 LPG STD 1 0092 7755306099 LPG STD 2 0092 7857306100 LPG STD 3 0092 7953306101 LPG STD 4 0092 8055306102 LPG STD 5 0037 1042

Welding Kits

Mfr No. Description Part Number308157 Acetylene Proline torch kit 0103 1958308158 LPG Proline torch Kit 0103 2009308160 Turbolite torch CTL-44 0103 2060

Checklist for the Safe Operation of Gas Cutting & Welding EquipmentStandards Australia released AS839 – 2001 ‘The safe use of portable and mobile oxy-fuel systems for welding, cutting, heating and allied processes’ that addresses many important issues concerning the everyday use of gas equipment. Following is a check list of requirements and procedures that, if followed, will help to ensure a safe operating environment.

General Equipment ChecklistCompatibility of blowpipes and cutting attachments•

Regulators shall comply with AS267•

Regulators shall only be used with the gas for which they are designed•

Gas hoses and their fittings shall comply with AS1335•

Hoses shall only be used with gases for which they have been designed•

Safety devices (flashback arrestors) shall comply with AS603•

Safety devices (flashback arrestors) shall be used in all oxy-fuel systems•

There shall be at least one safety device to protect each line of oxygen and fuel gas•

Fitment of Safety DevicesFlashback arrestors at both hose ends (optimum protection), • ORFlashback arrestors at blowpipe hose ends only, • ORFlashback arrestors at the regulator hose ends and check valves at the • blowpipe ends

Maintenance Schedule for Gas EquipmentWeekly, to be performed by the operator•

Six or twelve monthly as nominated, to be performed by a technically • competent personRefurbishment or replacement as recommended by manufacturer or supplier but • not exceeding five years

Safety Equipment and Operations ChecklistEye protection (welding goggles) shall comply with AS/NZS1337•

Guidance for the storage and handling of gas cylinders as recommended by both • AS289 and AS332Cylinder trolleys are fit for purpose •

Lighting up and shut down procedure as per the manufacturers instruction•

Safety InstructionsOperator safety•

Operator workplace safety•

Safe use of equipment•

Tanks and containers operator safety•

Confined space operator safety•

Emergency shutdown procedure•

72781_Chapter_04_D4.indd 04-35 8/10/09 11:24:17 AM

04



Gas Blowpipe Systems

Blowpipe Systems – COMET Acetylene Swaged Welding Tips

Mfr No. Size mm Part Number307056 4 0441 7156307057 6 0441 7253307000 8 0808 1209307001 10 0808 1306307002 12 0808 1403307003 15 0808 1500307004 20 0808 3401307005 26 0808 1607307006 32 0808 3304

Roller Guide

Mfr No. Description Part Number308729 Universal guide roller 0806 7809

COMET Acetylene Heating Tips

Mfr No. Description Style Part Number307121 Oxygen/Acetylene heating tip SHA1 0363 7242307122 Type 541 heating tip SHA2 0808 2402

COMET Superheating Barrels

• Tubular Stainless Steel construction gives excellent strength and heat conductivity

• Screw fi ttings ensure an easy leak-free connection between mixers and a superheating tip

Mfr No. Description Length mm Part Number307123 Straight barrel 735 0814 1000307125 Gooseneck barrel 700 0814 0904307124 Gooseneck barrel 450 0814 1107

Size 32 307006

Size 26 307005

Size 20 307004

Size 4 307056

Size 6 307057

Size 8 307000

Size 10 307001

Size 12 307002

Size 15 307003

SHA1 & SHA2

735mm

700mm

450mm

COMET LPG Heating Tips

Mfr No. Description Style Part Number307117 Heat tip 544 48mm x 15mm SHP4 0530 2059307118 Heat tip 544 48 mm x 12mm SHP3 0033 1456307119 Heat tip 544 36mm x12mm SHP2 0033 1354307120 Heat tip small 18mm x 12mm SHP1 0808 2101

COMET LPG Swaged Welding Tips

• Provides effi cient, economical high intensity heat

• Excellent fl ame stability• Heavy copper head for heat

and wear resistance• Simple design for ease of cleaning

Mfr No. Size Part Number307059 15 0514 9630307068 8 0377 0029

Radius Bar

Mfr No. Description Part Number308752 Radius bar complete with pivot 0806 7702

COMET Heating Tip

Mfr No. Description Part Number307007 Weld tip Type 551 8mm x 12mm 0389 9205307026 Weld tip Type 551 set of 7 0808 3508307045 Weld tip Type 56 4mm x 10mm 0808 3207

COMET Mixers

• Hand tightening for easy attachment onto blowpipe

• Large fl utes on mixer give easy positive handling even when wearing welding gloves

• High resistance to backfi re, regardless of the gas type or fl ow settings

Mfr No. Description Part Number304002 Type 550 0813 8204304003 Type 570 0813 8301

Heating Nozzle

Mfr No. Description Part Number306068 Heat nozzle Type 41 0807 0605306034 Heat nozzle Type 44 0807 2302

SHP1SHP2SHP3 & SHP4

Size 15

Size 8

10mm ( 3⁄8”) Type 550

13mm ( 1⁄2”) Type 570

72781_Chapter_04_D4.indd 04-36 8/10/09 11:24:19 AM

04



COMET Injector

• Hand tightening for easy attachment onto blowpipe• Large fl utes on mixer give easy positive handling

even when wearing welding gloves • High resistance to backfi re, regardless of the gas type or fl ow settings

Mfr No. Description Part Number304166 Type 574, LPG/natural gas 0813 8408

COMET 3 Cutting Attachment (Multi Fuel)

• Attaches easily to blowpipe with no tools required

• Locking teeth enables the attachment to be repositioned

• Cutting oxygen lever securely fi tted to body for ease of operation• Twin tube construction gives good visibility

Mfr No. Description Part Number304005 Cutting attachment Type 40 0806 7401

COMET Multi-Purpose Blowpipes

Mfr No. Description Part Number304141 Aluminium handle 90° head 0806 7207304143 Aluminium handle straight head 0013 0781

Regulators

COMET 700 Oxygen & Acetylene Regulators

• Suitable for the majority of cutting, welding and heating applications• Ideally suited for use with ‘G’ and ‘E’ size oxygen and acetylene cylinders• Oxygen Regulators: 1000kPa outlet pressure• Acetylene Regulators: 150kPa outlet pressure• Angled outlets• COMET™ regulators have the GasGuard™ safety features• Certifi ed to AS 4267

Mfr No. Description Part Number301531 Oxygen twin gauge 0418 0816301532 Acetylene twin gauge 0824 2608301535 Oxygen PNT valve 0026 9110301536 Acetylene PNT valve 0530 1554301637 Oxygen twin gauge 0160 1355301800 Inert 800kPa 0242 0212

304141

304143

301637 301532

Cutskill Oxygen & Acetylene Regulators

Mfr No. Description Part Number210223 Acetylene regulator 0312 5423210222 Oxygen regulator 0312 5457

COMET 700 Nitrogen Regulator

• Suitable for most general purpose industrial and laboratory gas control applications

• Nitrogen models are fi tted with pressure relief valves to protect downstream equipment against increases above the maximum outlet pressure of the regulator

Mfr No.Max. Outlet Pressure kPa Connection Inlet Outlet Part Number

310351 400 Type 50 5⁄8”–18 UNF Rh Ext 0549 6039

310345 1000AS2473 Type 50 (24 x 2mm Whit form Rh Int)

5⁄8”–18 UNF Rh Ext 0549 5937

310350 1000 Type 50 5⁄8”–18 UNF Rh Ext 0549 6022310346 3000 Type 50 1⁄4" tube fi tting 0549 5954301563 3000 Type 10 1⁄4" tube fi tting 0080 7568310349 3500 Type 50 – 0549 6005301565 20000 Type 11 1⁄4" tube fi tting 0117 0865

COMET 500 LPG Regulator

• Designed for use with the range of COMET blowpipe equipment

• Can be used for most cutting, welding and heating applications

Mfr No. Description Part Number301525 LPG 0806 6703

COMET 500 Oxygen Regulators

Mfr No. Description Part Number301523 Oxygen twin gauge regulator 0813 7807301524 Acetylene twin gauge regulator 0813 7904

210223 210222

310345

310525

301523

72781_Chapter_04_D4.indd 04-37 8/10/09 11:24:22 AM

72781_Chapter_04_D4.indd 04-38 8/10/09 11:24:26 AM

72781_Chapter_04_D4.indd 04-39 8/10/09 11:24:31 AM

04



Flashback Arrestors

COMET Flashback Arrestors – Regulator & Blowpipe Mounted

• Stainless Steel fl ame arresting fi lters with non-return valves• Supplied with inlet fi lters• Comply to AS 4603

Mfr No. Description Part Number308799 Oxygen fl ashback arrestor – F1 super reg mounted 0093 0653308800 Fuel fl ashback arrestor – F1 super reg mounted 0093 0556308734 Oxygen fl ashback arrestor – F2R reg mounted 0098 0357308735 Fuel fl ashback arrestor – F2R reg mounted 0098 0454308777 Oxygen fl ashback arrestor – F6 blowpipe mounted 0033 4061308778 Fuel fl ashback arrestor – F6 blowpipe mounted 0988 6911308862 Fuel fl ashback arrestor – 85-10B blowpipe mounted 0358 4899308861 Fuel fl ashback arrestor – 85-10B blowpipe mounted 0358 4882308837 Flashback arrestor – F6 KC 0156 2156308854 Oxygen fl ashback arrestor – F2B 0310 0501308891 Flashback arrestor – F2B blowpipe set 0345 9150308890 Flashback arrestor – F2R blowpipe set 0345 9133308889 Flashback arrestor – F6 blowpipe set 0345 9167308837 Flashback arrestor – F6 Kwik con set 0345 9184308830 Flashback arrestor – fuel pipeline 0627 0763308883 Fuel fl ashback arrestor 85-10 RLP L/H 0372 6339308882 Flashback arrestor – 85-10 RLP Oxy R/H 0372 6288308859 Flashback arrestor – oxy reg end 0627 0746308853 Fuel fl ashback arrestor – F28 FBA 0310 0484308860 Fuel fl ashback arrestor 85-10R 0377 0063

Fumes & Gases Welding fume is an extremely complex by-product of certain kinds of welding processes. In MMAW fumes arise by vaporisation of core metal and flux components of electrodes. Various constituents of core metal and flux react at high temperatures of welding arc to produce fume particles consisting of a mixture of complex oxides. Products of reaction of core and flux components will appear in the welding depending on factors such as:

Welding conditions, which influence arc and gas temperatures•

Heats of formation, a thermochemical factor; and•

Relative volatiles – that is vaporisation behaviour of the metal oxides•

Materials other than the welding consumables may represent a significant source of atmospheric contamination. Some examples are:

Where the workpiece itself contains volatile constituents, such as beryllium • in copper;Where ferrous alloys have a surface coating or where non-ferrous metals, such • as copper and nickel or their alloys, are cut, heated or welded; andWhere painted metal surfaces are used – metal fumes may result from paint • pigments and organic pollutants from paint binders

Product InsightBrazing & FluxWhat is the difference between welding and brazing?Brazing involves melting a filler material between two workpieces to form a bond between them, without melting the actual workpieces; welding involves melting the actual workpieces.What is flux?Flux is a chemical cleaning agent which facilitates soldering, brazing, and welding by removing oxidation from the base and filler metals to be joined. Flux is a substance which is nearly inert at room temperature, but which becomes preferentially oxidised at elevated temperatures, preventing the formation of metal oxides. Additionally, flux allows solder to flow easily on the working piece rather than forming beads as it would otherwise.

Gas Brazing & Welding Rods – Copper Alloy

Comweld Manganese Bronze

• General purpose brazing alloy• Recommended for braze welding

of steels, cast and malleable irons• Not suitable for copper pipes

in hot water systems• Classifi cation AS: R Cu Zn-C


Comweld Comcoat C

• Recommended for braze welding of steels and cast and malleable irons• Flux coated manganese bronze rod – general purpose brazing alloy• Not suitable for copper pipes in hot water systems• Classifi cation AS: R Cu Zn-C


Comweld Tobin Bronze

• Ideal for braze welding joints in brass and bronze• Used for braze welding of mild steel in low stress

applications such as the ‘fi lling’ of car body panels• Not suitable for cast irons• Classifi cation AS: R Cu Zn-A


Comweld Comcoat T

• Ideal self fl uxing fi ller rod for welding selected brass and bronze alloys• Used for braze welding of mild steel in low stress applications

such as the ‘fi lling’ of car body panels• Not suitable for cast irons• Classifi cation AS: R Cu Zn-A


Comweld Nickel Bronze Rods

• Suitable for high strength braze welding of steels and cast or malleable irons• Fuse welding of copper based alloys of similar composition• High strength, wear resistant brazing alloy• Classifi cation AS: R Cu Zn-D


72781_Chapter_04_D4.indd 04-40 8/10/09 11:24:37 AM

04



Comweld Comcoat N

• ‘Self fl uxing’ nickel bronze fi ller rod recommended for high strength braze welding of steel and cast or malleable irons

• Produces joints in mild steel which, when tested to destruction, fail in the parent metal

• Superior wear resistance makes it ideal for build-up of worn ferrous metal components including gear teeth, valve seats, bearings and shafts

• Classifi cation AS: R Cu Zn-D

Mfr No. Description Part Number321215 3.2mm 2.5kg packet 0809 3909322208 2.4mm handipak 0006 3546

Cast-Iron/Galvanising Bar Rods

Comweld Galvanising Bar


Brazing & Welding Fluxes

Comweld Aluminium Flux

• For fusion welding aluminium alloys• Highest quality fl ux – usable in

either powder or paste form• Recommended for use with Comweld Aluminium welding

rods, AL1188 (Pure), AL4043 (5% Silicon) and AL5356 (5% Magnesium)

Mfr No. Description Part Number321740 250g black plastic jar 0808 7407

Comweld Copper & Brass Flux

• Developed for the braze welding of copper, brass and bronze and the brazing of copper and steel

• Highest quality fl ux – usable in either powder or paste form

• Particularly suitable for use with Comweld Manganese Bronze, Tobin Bronze, Nickel Bronze and Silicon Bronze rods

Mfr No. Description Part Number321822 250g black plastic jar 0808 8503

Comweld Silver Brazing Flux No.2

• High silver content (42-50%) produces excellent joints on carbon steel, Stainless Steel, nickel alloys and copper and brass

• Dissimilar metals in the above groups can be easily brazed

• Flux is a good temperature indicator and will melt at the proper brazing temperature

• Highest quality fl ux used in a paste form

Mfr No. Description Part Number321840 200gm black plastic jar 0808 8804321841 500g black plastic jar 0808 8901321843 3.5kg tin 0532 7856

Comweld G.P. Silver Brazing Flux

• For silver brazing of steel, nickel, brass, bronze, copper and Stainless Steels

• Recommended for use with cadmium bearing and cadmium free silver brazing alloys with a low to medium silver content (2-40%)

• Excellent for medium to high temperature brazing, specially formulated to be used for induction brazing

• Highest quality fl ux used in a paste form

Mfr No. Description Part Number321850 200g black plastic jar 0808 9104321851 500g black plastic jar 0808 9201321853 3.5kg tin 0808 9308

Comweld 965 Soldering Flux

• For use with all Comweld soft solders, enabling excellent joints to be made on almost all metals and combinations of metals

• Very active fl ux and therefore, if used on copper, brass, bronze may be diluted if required in the ratio 1 part fl ux to 4 parts water

• Highest quality fl ux used in a liquid form

Mfr No. Description Part Number321890 125ml bottle 0808 9803321894 1L bottle 0808 9900

Solders

Solders

• 221˚C melting point• Contains no lead for potable water

copper pipe applications

Mfr No. Description Part NumberSSW075 3⁄4oz solder coil 0777 1115SSW300 3oz solder spool 0777 1132

SSW075SSW300

72781_Chapter_04_D4.indd 04-41 8/10/09 11:24:40 AM

04



Rosin Core Solders

• 221˚C melting point• Contains no lead• Rosin core fl ux is for non-conductive

eliminating electrical failures

Mfr No. Description Part NumberSRC050 Rosin core solder 1⁄2oz coil 0777 1149SRC300 Rosin core solder 3oz spool 0777 1166

Acid Core Solder

• 221˚C melting point• Contains no lead• Acid core fl ux is highly active for

greater removal of oxidization

Mfr No. Description Part NumberSAC075 Acid core solder 3⁄4oz coil 0777 1183SAC300 Acid core solder 3oz spool 0777 1200

Solder Kit

• Soldering Wire Kit contains : 3oz Soldering wire, 1 oz self cleaning soldering paste fl ux, 4-in-1 brush work piece preparation plus abrasive cloth

Mfr No. Description Part NumberSSW300PK Soldering wire kit 0777 1234

Flux Solder

• Prevents oxidization during soldering• Contains no lead• Removes oxidization before soldering • Includes application brush• Apply to copper pipe and joint before soldering

Mfr No. Description Part NumberSWSF100 Flux solder 1oz coil 0777 1217

SRC050SRC300

SAC075SAC300

Soldering Torches & Fuels

JTH7 Hose Torch Kit

• High intensity swirl action fl ame for maximum heat output• Durable solid brass burner wand• Flexible 900mm hose for optimum reach• Solid brass pressure regulator valve for consistent performance at any job angle• Belt clip secures cylinder for portability• Use with propylene or propane gas

Mfr No. Description Part NumberJTH7 Hose and Torch Kit 0548 2864

TS8000BT Sure Fire Professional Brazing Torch

• Self-igniting brazing torch• Ultra swirl fl ame for highest heat output• Adjustable fl ame height• Heavy duty igniter• Lock button for continuous operation• Durable, cast aluminium construction• Replaceable Stainless Steel burn tip• Pressure regulated for consistent performance at any job angle• Use with propylene or propane gas

Mfr No. Description Part NumberTS8000BT Sure fi re professional torch 0548 2762

TS7000T Trigger Start Torch

• Adjustable fl ame height• Trigger start self-igniting torch head• Swirl fl ame for high heat output• Lock button for continuous operation• Pressure regulated for consistent performance at any job angle• Durable, cast aluminium torch head, Stainless

Steel burn tube and brass burn tip• Use with propylene or propane

Mfr No. Description Part NumberTS7000T Pro series torch only 0518 3494

TS8000BZKC Gas Torch Kit

• Self-igniting cast aluminium propylene gas torch kit• Ultra swirl fl ame for highest heat output• Lock button for continuous operation• Adjustable fl ame height• Replaceable Stainless Steel tip• Solid brass pressure regulator valve

for consistent performance at any job angle• Use with propylene or propane gas

Mfr No. Description Part NumberTSB8000BZKC Torch head with MAPP bottle 0666 9974

72781_Chapter_04_D4.indd 04-42 8/10/09 11:24:44 AM

04



TS4000ZKC Trigger Start Torch Kit

• Trigger start propylene gas torch kit• Swirl fl ame for high heat output• Lock button for continuous operation• Pressure regulated for consistent

performance at any job angle• Durable, cast aluminium torch head,

Stainless Steel burn tube and brass burn tip

Mfr No. Description Part NumberTS4000ZKC Self-igniting gas kit 0352 2968

UL100 Pencil Flame Torch Kit

• 2 piece torch kit• All brass pencil fl ame torch head• Solders, sweats, heats and melts• Propane fuel included

Mfr No. Description Part NumberUL100 Gas propane kit 0518 3409

JT539T – Swivel Flame Brazing Torch

• For use with propylene gas or propane gas• Pressure regulated for consistent performance at any job angle• Swirl Flame

Mfr No. Description Part NumberJT539T Swivel fl ame head MAPP torch 0709 5977

Flame Types

Multi-purpose FlameGood for all applications except when high heat intensity is required, like brazing. Slightly softer and less intense than pencil and swirl flames.

Swirl FlameGenerates higher heat concentration on the work piece. Good for most applications except when very low heat intensity is required.

Jumbo FlameFlame is like an enlarged pencil point and is best suited to heavy duty applications.

Pencil FlameProduces a fine pencil point flame which is required when heat needs to be applied to a small area. Ideal for detailed and fine jobs.

Disposable Propane Gas Cylinder

• 479 gram bottle• Fuel burns to 1,871ºC (3,400ºF)

Mfr No. Description Part NumberTX9 Disposable propane gas cyclinder 0518 3460

Disposable Propylene Gas Cylinder

• Propylene gas cylinder for use with Bernzomatic heat torches

• Sliver soldering, soft soldering and brazing• 479 gram bottle• Fuels burns at 1982˚C (3600˚F)

Mfr No. Description Part NumberMG9 Propylene gas 0518 3477

TS3000T – Quick Fire Self-Igniting Torch Head

• Trigger start self-igniting torch• Quick Fire high temperature adjustable fl ame• Stainless Steel burn tube and sold brass burn tip• Regulated to burn upside down• Comfortable grip• For use with propane gas only• Multi-purpose fl ame

Mfr No. Description Part NumberTS3000T Self-igniting propane head torch 0709 5892

72781_Chapter_04_D4.indd 04-43 8/10/09 11:25:02 AM

04



TS3000KC – Quick Fire Self-Igniting Torch & Propane Kit

• Trigger start self-igniting torch• Quick Fire high temperature

adjustable fl ame• Stainless Steel burn tube

and sold brass burn tip• Regulated to burn upside down• Comfortable grip• For use with propane gas only• Multi-purpose fl ame• 479g propane bottle

Mfr No. Description Part NumberTS3000KC Quick fi re kit propane torch 0709 5943

JT680 – Jumbo Flame Torch Head

• All brass torch head• Produces a large, high volume 32mm adjustable fl ame• For use with propane gas only• Jumbo Flame

Mfr No. Description Part NumberJT680 Jumbo fl ame propane torch head 0709 5909

TS799 – Trigger Start Swivel Torch

• For use with propylene or propane gas• Trigger start self-igniting torch head• Solid brass regulators• 360˚ swivel burn tube• Removable brass top• Double "O" ring connection for improved sealing• Ultra swirl fl ame

Mfr No. Description Part NumberTS799 Swivel head trigger start torch – MAPP 0709 5960

UL2317 – Pencil Flame Torch Head

• All brass torch head• Produces a 13mm pencil fl ame for detail work• For use with propane gas only• Pencil point fl ame

Mfr No. Description Part NumberUL2317 Pencil fl ame propane torch head 0709 5926

Solder – Cored & Solid

Acid Cored Solder – Single Core

• Used where corrosive residue can be easily removed

• Standard pack quantity: 500gm spool

Mfr No. Diameter mm Grade Part Number322313 3.20 40/60 Tin/lead 0006 3614322317 1.60 50/50 Tin/lead 0501 8766322318 3.25 50/50 Tin/lead 0528 3554

Silver Solder

Mfr No. Diameter mm Part Number322321 1.60 0820 0705322320 3.15 0100 8952

LP Gas Cylinders

Internal Thread LP Gas Cylinders

• Provide safe thread connection to industrial and leisure equipment

Mfr No. Mass kg Part NumberPRI2000* 0.34 0795 9400PRI2012 2.00 0795 9701PRI2016 3.30 0810 5208

*Refi llable cylinder

POL Thread LP Gas Cylinders

• Ideal for domestic and leisure applications

Mfr No. Mass kg Part NumberPOL450C 4 0085 9673POL900C 9 0829 8500

72781_Chapter_04_D4.indd 04-44 8/10/09 11:25:07 AM

04



LP Gas Stoves

Single Burner Stoves

• 225mm diameter single burner stove

Mfr No. Description Part Number2077-75 External valve with manual ignition, 3⁄8” LH connection 0523 7758

LP Gas Kits

Tradefl ame LP Gas Kit – Refi llable Cylinder

• Supplied with connecting valve, medium and pinpoint burners, copper bit and holder, fantail attachment and 0.34kg refi llable cylinder

Mfr No. Description Part NumberBJ2101 Handyman cylinder kit 0776 8617

Tradefl ame LP Gas Kit – Hose & Handpiece

• Supplied with connecting valve, medium and pinpoint burners, fantail attachment, copper bit and holder, 2 metre hose and handpiece

Mfr No. Description Part NumberBJ2102 Handyman hose and handpiece kit 0810 5800

Tradefl ame LP Gas Kit – Universal

• Supplied with pinpoint and full fl ame burners, 2 metre hose and handpiece with brass control tap

Mfr No. Description Part NumberBJ2195 Handyman universal kit G/P 0006 4509

LP Gas Handyman Equipment

Torches

• Ideal for domestic and leisure applications

Mfr No. Description Part NumberBK2138 Ultra pinpoint torch 0821 1202BJ2144 Pinpoint torch 0821 1600BJ2145 Medium fl ame torch 0821 1503BJ2146 Full fl ame torch 0821 14062135 Powerjet with 8706 Cyclone Burner 0103 2383

Handpieces

Mfr No. Description Part Number3486 Handpiece with brass tap 0474 70133488 Handpiece with economiser 0553 0601

Extension Hoses

• For propane or butane• With spanner tight couplings

Mfr No. Length m Part NumberSV2000 2 0035 4926SV4000 4 0035 4909SV6000 6 0035 4943SV9000 9 0103 3063

BJ2144

BJ2145

BJ2146

2135

3486 3488

72781_Chapter_04_D4.indd 04-45 8/10/09 11:25:12 AM

04



Regulators

Mfr No. Description Part Number309121 Regulator fi xed pressure – POL 0089 0681306111 Regulator variable pressure – POL 0518 2729306112 Regulator variable pressure – 3⁄8 LH 0413 1260306311 Regulator variable pressure – POL with hose failure valve 0350 0086306312 Regulator variable pressure – 3⁄8 LH with hose failure valve 0810 8700

Neck Tubes – Bent

Mfr No. Length mm Part Number3509 180 0553 07083510 350 0103 33863507 500 0103 34373506 750 0103 3471

Burners

Mfr No. Length mm Part Number2944 42 0471 47522960 60 0103 2655

Neck Tube Burner

Mfr No. Description Part NumberSV2957 Soft fl ame burner 0103 2893

Oxygen Cylinders

Disposable Oxygen Cylinder

• Use with propylene gas for hottest brazing performance and light cutting or welding

Mfr No. Description Part NumberOX9 Disposable oxygen cylinder 454g 0709 6062

309121 306111

306112 306311 306312

3509

3510

35073506

29602944

Welding Helmets

Prosafe Welding Helmet

• Polypropylene shell• Lift-up lens holder• Adjustable ratchet head harness• Fitted with shade 10 fi lter and clear lens cover• Helmet AS/NZS 1337 approved• Filter AS/NZS 1338.1 approved

Mfr No. Description Part NumberWH01 Welding helmet – lift up front 0452 1106

Arcmaster Electronic Welding Helmets

• General purpose MIG manual arc welding• Auto darkening helmet stands up

to harsh welding environments• Can be used in all welding environments including

TIG and fl ux-cored• Extremely large viewing area and has two self

adjusting sensors with two 10 year lithium batteries• This lens has signifi cant improvements over older

style lenses with increased solar panel cells for greater power generation, ensuring the fi lter is ready to perform whenever you are ready to weld

• Recharging is not required• Two independent photo sensors are located at opposite

ends across the top of the fi lter to eliminate accidental blockage

Mfr No. Visor Colour Part Number454143 Shade 11 0086 3413454146 Auto dark – shade 11 lens only 0088 9678

Arcmaster Pro Helmet

• Battery powered lens with solar assist• Fully adjustable sensitivity and delay controls• Variable shade from 9-13• Low battery indicator• Fume defl ection• Lightweight construction• Strong and fl exible

Mfr No. Description Part Number454296 Arcmaster Pro auto dark welding helmet 0141 9065

Related Product

Mobile Welding Fume Cleaner

FS7 and FS8 are mobile •

One or two Ozone Flexi Arms or flexible • hose kit options One, three and five kilowatt power options •

Patented cleanable high efficiency cartridge filter •

Tough steel construction with easy care powder coat finish•


See Safety – Site Section 08

72781_Chapter_04_D4.indd 04-46 8/10/09 11:25:15 AM

04



Weldskill Helmet

• Auto darkening fi lter lens• Fully adjustable sensitivity and delay controls• Grinding and welding modes• Battery powered with solar assist for extended battery life• High speed reaction time

Mfr No. Description Part Number

454305 Auto dark welding helmet – variable shade 9-13 0724 8790

454304 Auto dark welding helmet – fi xed shade II 0786 6638

optrel® P450 Tribe Helmet

• Sperian P450 Tribe Welding Helmet features all the good looks, comfort and versatility you would expect from a Sperian Welding Helmet but is also a cost effective welding option boasting attitude and style

• Variable shade adjustment from shade level 9 – 13 to suit different welding applications and the individual welders personal preference

• Hot tribal design• Solar cells• Potentiometer knob• Ratcheting headgear• Full range of replaceable spare parts and accessories available including

front cover lenses, inside cover lenses, headgear and sweatband and magnifying lenses

• 2 Year Warranty from date of purchase for product to be free from manufacturing defects

• All electric arc welding processes• Electrode welding (Stick welding, SMAW)/MIG/MAG (GMAW)/GMAW high

melting rate process/fl ux-cored wire welding/TIG welding (GTAW)/plasma arc welding/micro plasma arc welding/plasma cutting

• Prohibited for laser welding• Certifi ed to ASNZS 1337 (Medium Impact) and ASNZS 1338

Mfr No. Part Number1004-048 0784 1444

optrel® OSE Satellite Helmet

• Restricted for laser and oxy-gas welding

• Combines a high degree of fl exibility with easy operation

• All shade cartridge settings can be controlled externally and all functions can be optimised while wearing the helmet

• Field of View: 98 x 38mm• UV/IR Protection: Maximum protection

in any shade setting• Power Supply: Solar cells, no battery changes• Warranty: 2 Years from date of sale (in case of manufacture or material defects)• Shades 5 – 9 + 9 – 13 with grind mode• Electric arc welding processes – electrode welding, MIG/MAG, GMAW high

melting rate process, fl ux-cored wire welding, TIG, plasma arc, micro plasma arc and grinding

• AS/NZS 1337:1992 V (high impact level) approved


454305 454304

optrel® Galaxy High Impact Welding Helmet

• Flip front helmet eliminates the need to raise or lower your welding helmet with a quick and easy fl ip adapter

• In the up position the wearer is protected by a clear polycarbonate lens, perfect for grinding applications

• Field of View: 50 x 115mm• Shade Number: 10• UV/IR Protection: Maximum protection• Sensors: Nil• Power Supply: N/A• 1 Year Warranty from date of sale (in case of manufacture or material defects)• AS/NZS 1337 approved to high impact

Mfr No. Description Part Number1000-571 Flip up welding helmet 0721 55555000-226 High impact lens inside cover Pack of 5 0721 56065000-227 Lens front cover Pack of 5 0721 5623500-030 Inside cover lens 0461 14581000.571MONO Monadel welding helmet 0770 5461

optrel® OS100 Powered Air Purifying Respirator

• Battery powered (PAPR) Battery Life: 8 hours, Recharge Time: 3 hours

• Protection Level: P2• Flame retardant face seal, waist

belt and air supply hose• Blower delivers air at a fl ow rate

of 170lpm to the welding helmet• Dual alarms alert user to blocked

or missing fi lter and low battery• Short air duct on helmet increases

mobility of the welder• AS/NZS 1716 and AS/NZS 1337

high impact approved


optrel® Miraplus Welding Helmet

• Automatic welding helmet with two adjustable levels of protection – 4/10 or 4/11

• Darkens within a fraction of a millisecond to the correct level of protection and arc ignition

• Detachable sensor bar eliminates the infl uences of surrounding light

• Water-resistant cartridge for protection against humidity and moisture

• Use of solar energy ensures a constant supply of energy to the unit• Weight – 460g


optrel® OSC Welding Helmet

• All electric arc welding processes, electrode welding, GMAW, fl ux-cored wire, TIG, plasma arc, micro plasma arc, restricted for laser welding and oxy-gas welding

• Solar cell technology• Potentiometer knob, to fi nely adjust the shade

selection from shades 9 – 13, whilst welding• Switching time options, by adjusting

the switching time from dark to light to suit your requirements

• 2 Year Warranty from the date of purchase, in case of manufacturing and/or material defects

• Permanent protection from UV and IR radiation


72781_Chapter_04_D4.indd 04-47 8/10/09 11:25:19 AM

04



optrel® Orion OSE Blue Magic

• Restricted for laser welding• Choice of manual or automatic shade level

adjustment with an easy fl ick of the switch• Field of View: 98 x 38mm• Shade Number: 9 – 13• UV/IR Protection: Maximum

protection in any shade setting• Sensors: Two above the eyes• Power Supply: Solar cells,

no battery changes• Warranty: 2 Years from date of sale (in case of manufacture or material defects)• Electric arc welding processes – electrode welding, MIG/ MAG, GMAW high

melting rate process, fl ux corded wire welding, TIG and Plasma Arc• AS/NZS 1337 approved to high impact


3M™ Speedglas™ 9100 Welding Shields

• Seven adjustable dark shades 5, 8, 9, 10,11,12 and 13

• New lock in any shade mode• New grind mode• New patented tack welding comfort mode• Exclusive patented exhaust vents direct

your exhaled air out of the shield and reduces fogging

• High impact rating according to the requirements of AS/NZS 1337

• Increased coverage from heat and welding sparks

• Exclusive patented new SideWindows design for enhanced vision

• Advanced ergonomic head harness• Centre and eye level sensorsSpeedglas™ 9100XX• Viewing area 73 x 107mm• 85% larger than Speedglas 9100VSpeedglas™ 9100X™• Viewing area 54 x 107mm• 35% larger than Speedglas 9100VSpeedglas™ 9100V™• Viewing area 45 x 93mm

Mfr No. Description Part Number501825 Speedglas™ 9100XX 3/5, 8, 9 to 13 SideWindows 0775 0698501815 Speedglas™ 9100X 3/5, 8, 9 to 13 SideWindows 0775 0681501805 Speedglas™ 9100V 3/5, 8, 9 to 13 SideWindows 0775 0664

3M™ Adfl o™ Powered Air Purifying Respirator Systems

• Powered air purifying respirator system with a nominal protection factor of 50

• Factory calibrated with automatic fl ow control

• Two adjustable air fl ow settings 170/200 l/m

• NiMH battery eliminates memory build up

• LED battery indicator• Four hour fast smart charger• Large surface area particle fi lter

with optional odour and gas fi lters• LED particle fi lter indicator and low fl ow alarm• Extra wide belt for additional padding

and back support• With 9002X welding shield, shades 9 – 13446680• Auto-darkening welding shield and powered air

purifying respirator with a 120 x 90mm clear lens ideal for weld preparation and inspection

501825

446680

466680

• Full shift respiratory protection coupled with excellent vision under any lighting conditions

466680• Auto-darkening welding shield and powered air purifying respirator

Mfr No. Description Part Number446680 PAPR 9002X FlexView SideWindows Adfl o 0788 3196466680 PAPR 9002X SideWindows Adfl o 0821 6124

3M™ Speedglas™ 100 Welding Shields

3M™ Speedglas™ 100V• Variable with fi ve adjustable dark shades 8,

9, 10, 11 & 12 in all options• Three sensitivity settings suitable for Stick,

MIG, and TIG• Switching speed of 0.1ms3M™ Speedglas™ 100S• Single shade 10 or 11• Switching speed of 0.1ms

Mfr No. Description Part Number751110 Speedglas™ 100S 3/10 0815 8783751111 Speedglas™ 100S 3/11 0815 8800751120 Speedglass™ 100V 3/8 – 12 Ninja 0815 8817751220 Speedglass™ 100V 3/8 – 12 Blaze 0815 8834751320 Speedglass™ 100V 3/8 – 12 Extreme 0815 8851751420 Speedglass™ 100V 3/8 – 12 Chrome 0815 8868751520 Speedglass™ 100V 3/8 – 12 Mechanical skull 0815 8885751620 Speedglass™ 100V 3/8 – 12 Trojan warrior 0815 8902

Ninja

Extreme

Blaze

Chrome

Skull

Trojan

72781_Chapter_04_D4.indd 04-48 8/10/09 11:25:22 AM

04



Welding Helmet Spares

Harness

Mfr No. Description Part Number454300 Arcmaster Pro assy harness 0141 9133

Lens

Mfr No. Description Part Number454297 Arcmaster Pro lens auto SH9 – 13 0771 2754454298 Arcmaster Pro lens front cover 0141 9082454299 Arcmaster Pro lens rear cover 0141 9116

Cover Lens

• Protects fi lter lenses from heat and spatter

Mfr No. Size mm Material Type Part Number453862 108 x 51 Glass Cover lens 0401 1309454077 133 x 114 Plastic Cover lens 0158 0455453861 108 x 51 Plastic Cover lens 0401 1105

Omni-View Lens

• Gold-coated fi lter allows welders to see their work in true natural colours

• Offers protection from infrared and ultraviolet radiation and fl ying particles that would break ordinary glass

• Refl ects practically all the heat

Mfr No. Size mm Visor Colour Part Number453924 108 x 51 Shade 10 0440 6707453925 108 x 51 Shade 11 0440 6600453926 108 x 51 Shade 12 0440 6503

Magnifi cation Lenses

• Magnifi es the work area to substantially assist the welder in maintaining the high standards required

• They are available from 1.5 up to 2.5 times magnifi cation

• Fits all standard welding helmets 108 x 51mm

Mfr No. Description Part Number454012 1.5 times magnifi cation 0030 1657454010 2.0 times magnifi cation 0530 9467454014 2.25 times magnifi cation 0530 9564454011 2.5 times magnifi cation 0492 3158

Helmet Spares

Mfr No. Description Part Number454301 Arcmaster™ Pro sweatband 0141 9150

453861

3M™ Speedglas™ 9100 Welding Shield Spares

Mfr No. Description Part Number526000 External lens cover Pack of 10 0775 0800527000 External lens cover (hard coat) Pack of 10 0775 0817528005 Internal lens cover 9100V Pack of 5 0775 0851528015 Internal lens cover 9100X Pack of 5 0775 0868528025 Internal lens cover 9100XX Pack of 5 0775 0885168015 Sweatbands Pack of 3 0775 0902422000 Lithium batteries Pack of 2 0342 2260

3M™ Speedglas™ 100 Welding Shield Spares

Mfr No. Description Part Number776000 External lens cover Pack of 10 0815 9123777000 External lens cover (hard coated) Pack of 10 0815 9140428000 Internal cover lens Pack of 5 0361 3731167000 Towelling sweatbands 0376 5779167500 Towelling sweatbands Pack of 5 0253 3109422000 Lithium batteries Pack of 2 0342 2260

3M™ Adfl o™ Powered Air Purifying Respirator Spare Parts

Mfr No. Description Part Number836010 Respirator pre-fi lter Pack of 5 0409 8860837010 Particle fi lter 0409 8673434001 Respirator face seal 0253 3075426000 Outside standard cover lens140°C Pack of 10 0253 2990427000 Outside scratch resistant cover lens 145°C Pack of 10 0364 5028428010 Internal lens cover Pack of 5 0253 3024167000 Towelling sweatbands 0376 5779167500 Towelling sweatbands Pack of 5 0253 3109422000 Lithium batteries Pack of 2 0342 2260

optrel® Front & Inside Cover Lens

• Protects fi lter lenses from heat and spatter

Mfr No. Description Part Number500-010 Optrel front cover lens 0460 7063500-030 Inside cover lens 0461 1458500-210 Front cover lens (Satellite only) Pack of 2 0405 8111500-212 Front cover lens (Satellite only) Pack of 5 0513 1287500-035 Inside cover lens + 2 shades 0069 8003500-040 Inside cover lens + 1.5 shades 0069 8020500-045 Inside cover lens + 1 shade 0069 7986500-060 Inside magnifying lens diop 1.5 0069 8224500-070 Inside magnifying lens diop 2.0 0069 8173500-030 Lens inner cover Pack of 5 0721 5640

72781_Chapter_04_D4.indd 04-49 8/10/09 11:25:27 AM

04



optrel® Nova Shade Cartridge

• Nova lens is an automatic darkening fi lter, which is suited to convert most passive helmets to auto darkening

• Restricted for laser and oxy-gas welding

• Field of View: 35 x 92mm• Shade Number: Shade level 3/10 or

with additional coloured fi lter (+1 shade) 4/11• UV/IR Protection: Maximum protection in any shade setting• Sensors: Two above the eyes• Two solar cells, no battery changes• Warranty: 2 years from date of sale (in case of manufacture or material defects)• Electrode and MIG/MAG welding

Mfr No. Description Part Number501-220 Shade cartridge 0315 1246

Helmet SparesMfr No. Description Part Number402-500 Battery pack to suit optrel® airfl ow 0108 0901402-050 Helmet pre-fi lter to suit optrel® Pack of 5 0108 09354119-001 Satellite with airduct face seal and cart 0632 3242500-407 Black sweatband Pack of 2 0341 7789

Related Product

Welding CurtainsFlash-stop 1300 welding curtains •

Curtains only or complete with frame •

Special sizes available on request •

Flash-stop standard sizes in gold, • green or red Also available in gold reinforced•

Part Number 0493 3157 (1.8 x 2.0 Green)

See Safety – Site Section 08

Related Product

Welding (Chipping) HammerFor removing scale from welds •

Spring or rubber grip •

Hardened head with chisel and point •

Spring handled hammer • – now in red for increased visibility

Part Number 0806 3007 (Spring Handle)

See Tools – Hand, Measuring, Precision Section 23

Welding Googles

Welding Goggles

• Gas welding and cutting processes when used within the recommendations of AS/NZS 1336

• Goggle with lift up front lens• 50mm diameter lens• Complete with Shade 5 fi lter lens certifi ed to AS/NZS 1338.1• Certifi ed to AS/NZS 1338.1

Mfr No. Description Part Number550126 Goggles - shade 5 0076 1736SHADE 5 Replacement lens - shade 5 0399 4906220038 Replacement lens - clear 0006 6147

Related Product

P2 Cupped RespiratorProvides protection against mechanically • and thermally produced particles Foam rubber nose seal •

Adjustable nose bridge for secure seal •

Twin elastic bands•



Related Product

TIG Welding Leather Gloves

Made from soft grain leather sewn • with Kevlar® thread Sure soft sensitive touch •

Extra snug fit •

Length – 279mm•



Related Product

Welders’ Leather ApronManufactured from split leather •

Leather neck strap •

Adjustable leather waist tie •

Provides protection for welding, grinding and other • situations where abrasion/cut resistance is required

Part Number 0230 2215 (635mm x 914mm)

See ClothingSection 09

72781_Chapter_04_D4.indd 04-50 8/10/09 11:25:30 AM

72781 chapter 04 d4.indd 1 8/10/09 11:22:16 am

Documents