72 kb naked wives in windows resolution 760 x 570 bbw
TRANSCRIPT
ZXR10 T8000Carrier-Class Router
Product Description
Version: 2.00.20
ZTE CORPORATIONNo. 55, Hi-tech Road South, ShenZhen, P.R.ChinaPostcode: 518057Tel: +86-755-26771900Fax: +86-755-26770801URL: http://ensupport.zte.com.cnE-mail: [email protected]
LEGAL INFORMATIONCopyright © 2013 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
Revision No. Revision Date Revision Reason
R1.0 2013-10-30 First edition
Serial Number: SJ-20131010093537-003
Publishing Date: 2013-10-30 (R1.0)
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ContentsAbout This Manual ......................................................................................... I
Chapter 1 Product Overview ..................................................................... 1-1
Chapter 2 Product Structure ..................................................................... 2-12.1 Hardware Structure ............................................................................................ 2-1
2.1.1 Single-Chassis System............................................................................. 2-2
2.1.2 Multi-Chassis System ............................................................................... 2-3
2.1.3 Boards..................................................................................................... 2-5
2.2 Software Structure.............................................................................................. 2-6
Chapter 3 Functional Features.................................................................. 3-13.1 Cluster Features ................................................................................................ 3-1
3.2 Layer-2 Features................................................................................................ 3-1
3.3 Layer-3 Features................................................................................................ 3-3
3.4 MPLS Features .................................................................................................. 3-3
3.5 QoS Features .................................................................................................... 3-4
3.6 Reliability Features............................................................................................. 3-5
3.7 IPv6 Features .................................................................................................... 3-6
3.8 Security Features ............................................................................................... 3-6
3.9 Clock Synchronization ........................................................................................ 3-7
3.10 Operation and Maintenance .............................................................................. 3-7
Chapter 4 Networking Applications.......................................................... 4-14.1 Core Node in IP/MPLS Backbone Networks......................................................... 4-1
4.2 Metropolitan Area Network Egress ...................................................................... 4-1
4.3 Internet Egress Gateway .................................................................................... 4-2
Chapter 5 Environmental Requirements .................................................. 5-15.1 Power Supply Requirements ............................................................................... 5-1
5.2 Operating Requirements..................................................................................... 5-3
5.3 Transportation Environment ................................................................................ 5-4
5.4 Storage Environment.......................................................................................... 5-5
Chapter 6 Standards .................................................................................. 6-16.1 Security Standards ............................................................................................. 6-1
6.2 Environmental Standards.................................................................................... 6-1
6.3 EMC Standards.................................................................................................. 6-1
I
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Figures............................................................................................................. I
Tables ............................................................................................................ III
Glossary .........................................................................................................V
II
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
About This ManualPurpose
This manual describes the product positioning and features, hardware structure, softwarestructure, functions, applications, link features, technical specifications, environmentalrequirements, and standards of the ZXR10 T8000.
Intended Audience
This manual is intended for network planning engineers.
What Is in This Manual
This manual contains the following chapters:
Chapter Summary
1, Product Overview Describes the position and features of the ZXR10 T8000.
2, Product StructureDescribes the external view, hardware structure, and software structure
of the ZXR10 T8000.
3, Functional Features Describes the functional features of the ZXR10 T8000.
4, Networking Applications Describes typical applications of the ZXR10 T8000.
5, Environmental Require-
ments
Describes the environmental conditions for operation, storage, and trans-
portation of the ZXR10 T8000.
6, StandardsDescribes the protocols that the ZXR10 T8000 supports, and standards
that the ZXR10 T8000 complies with.
I
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
II
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Chapter 1Product OverviewProduct Positioning
The ZXR10 T8000 is a large-capacity, and high-performance cluster core router that usesa new architecture. The ZXR10 T8000 can be used in applications that require largecapacity, high-speed ports, large number of ports, high performance, and high availability.For example, the ZXR10 T8000 can operate as a core node in the Internet, P node or PEnode in backbone networks, core egress node in large-scale metropolitan area networks,and egress node in large-scale data centers.
Features
The ZXR10 T8000 has the following features:
l Extremely-large capacity and sustainable extension
à The ZXR10 T8000 provides a new large-capacity switching matrix, whichguarantees that data can be forwarded without being blocked.
à The ZXR10 T8000 provides a large number of 10-gigabit interfaces supporting amaximum rate of 100 Gbps. This relieves network bandwidth pressure.
à The ZXR10 T8000 supports establishing a cluster system by interconnectingmultiple chassis, which extends device capacity linearly.
l Stable cluster control plane
à The software system consists of multiple logical entities. Each logical entitysupports 1 + 1 redundancy. The entities have little coupling relationshipsbetween each other, and the entities are separated logically.
à In the software system, the control modules (such as SCs) and service modules(such as the MPLS system, and the routing system) are located in different logicalentities.
à The ZXR10 T8000 uses the virtual cluster controller technology. Based on theload of management processing units, the active and standby SCs can operate inany management processing unit on any chassis in a multi-chassis system. Thisguarantees reliability of the multi-chassis system to the maximum extent.
à The ZXR10 T8000 uses the cloud computing-based control plane technology todistribute service modules on different physical CPUs in different chassis. TheZXR10 T8000 ensures that the service modules are distributed evenly among theCPUs through the specified algorithms, so that the multi-chassis system providesfull computing power.
1-1
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
à The ZXR10 T8000 supports In-Service Component and Cluster Update.Functions can be loaded dynamically, and device reliability is 99.999%.
l Carrier-class high availability
à The ZXR10 T8000 uses a multi-plane system architecture, and the keycomponents are redundant.
à The ZXR10 T8000 supports various functions, such as link aggregation, loadsharing, TE FRR, VPN FRR, GR/NSF, and NSR. These functions guarantee highavailability and stability for network operation.
à The ZXR10 T8000 supports multiple failure-detection mechanisms, such as BFD,Ethernet OAM, and MPLS OAM, so the ZXR10 T8000 can automatically detectnetwork failures quickly. This facilitates network operation and maintenance, andreduces network operation costs.
l Flexible configuration and low power consumption to reduce the TCO
à The ZXR10 T8000 supports motherboards and sub-cards. The switching fabricsupports M + N redundancy. Users can install device components flexibly basedon the network capacity and availability requirements to reduce the numbers ofreplacement components and save cost.
à The ZXR10 T8000 provides an independent monitoring plane, and supportsspecial power supply reports and traffic load reports. In this way, users canmanage and monitor the power supply more accurately.
à The intelligent power supply management system supports automatic powercontrol, so power consumption of board components can be adjusted dynamicallybased on service traffic.
à The fans support automatic and smart speed adjustment, the boards supportintelligent startup, and the processes support intelligent sleep. This effectivelyreduces energy consumption.
Multi-Chassis System Applications
The ZXR10 T8000 supports two types of chassis: LCC and CFC. An LCC can be usedas a single-chassis system, and multiple LCCs can be connected to CFCs to establish amulti-chassis system.
The ZXR10 T8000 supports different multi-chassis systems, such as one CFC and fourLCCs, two CFCs and eight LCCs, and four CFCs and sixteen LCCs. The ZXR10 T8000supports a multi-chassis system that includes a maximum of sixteen CFCs and sixty-fourLCCS. The multi-chassis systems provide a switching capacity higher than 200 Tbps. Themulti-chassis systems can meet different application requirements of users, and supportseamless equipment replacement and network upgrade.
1-2
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Chapter 2Product StructureTable of Contents
Hardware Structure ....................................................................................................2-1Software Structure......................................................................................................2-6
2.1 Hardware StructureThe ZXR10 T8000 provides two types of chassis: LLC and CFC. In the physical structure,the ZXR10 T8000 supports both single-chassis and multi-chassis configurations.
l When an LCC operates as an independent system, it is a single-chassis system.l Multiple LLCs can be connected to CFCs through optical interfaces and high-speed
optical fibers to establish a logical system that is called a cluster system.
The ZXR10 T8000 chassis uses an integrative rack structure design. The chassis can beinstalled in a 19-inch standard cabinet.
l The ZXR10 T8000 provides a high-speed backplane. All boards and cards areinstalled in the front side. Operational states of different system components aredisplayed through an LCD to facilitates queries.
l For heat dissipation, air flows enter the device from the lower side in the front andleave the device from the upper side in the back. The fan speed can be adjustedautomatically.
l The ZXR10 T8000 supports AC/DC power supply to meet different room conditions.l The key components include MPUs, SFUs, PFUs, and PIUs.
Figure 2-1 shows the front external view of the ZXR10 T8000 LCC and CFC.
2-1
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
Figure 2-1 Front External View of the ZXR10 T8000 Chassis
2.1.1 Single-Chassis SystemIn a single-chassis system, the ZXR10 T8000 LCC consists of a backplane, MPUs, SFUs,PFUs, PIUs, an ADU, power supply modules, and fan modules.
The components of an LCC are interconnected to the backplane in the following ways:
l The power supplymodules supply power for other components through the backplane.l The PFUs and SFUs are interconnected through the switching bus of the backplane
to establish a data plane.l The MPUs, SFUs, PFUs, and ADU are interconnected through the management bus
of the backplane to establish a control and management plane.l The MPUs, SPFs, and PFUs are interconnected through the clock bus of the
backplane to establish a clock synchronization plane.l The MPUs, power supply modules, and fan modules are interconnected through the
monitoring bus of the backplane to establish a monitoring plane.
Based on interface functions, the external interfaces provided by an LCC are divided intothe following types:
l User data interface: including interfaces (such as Ethernet interfaces and POSinterfaces) that support different speeds on PIUs.
2-2
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Chapter 2 Product Structure
l Management interface: including Ethernet management interfaces, consoleinterfaces, AUX interfaces, CF interfaces, and USB interfaces on MPUs.
l Clock interface: including 2-Mbits clock interfaces and 2-MHz clock interfaces onMPUs.
2.1.2 Multi-Chassis SystemA ZXR10 T8000 multi-chassis system consists of LCCs, CGCs, and cascade connectionsbetween chassis.
CFCA CFC consists of a backplane, MPUs, CSFUs, CESUs, an ADU, power supply modules,and fan modules.
The components of a CFC are interconnected to the backplane in the following ways:
l The power supplymodules supply power for other components through the backplane.l The MPUs, CSFUs, CESUs, and ADU are interconnected through the management
bus of the backplane to establish a control and management plane.l The MPUs, CSFUs, and CESUs are interconnected through the clock bus of the
backplane to establish a clock synchronization plane.l The MPUs, power supply modules, and fan modules are interconnected through the
monitoring bus of the backplane to establish a monitoring plane.
Based on interface functions, the external interfaces provided by a CFC are divided intothe following types:
l Inter-chassis interface in the data plane of a multi-chassis system: Each CSFUprovides 16 cascade interfaces that are used to connect MSFUs in LCCs.
l Inter-chassis interface in the control plane of a multi-chassis system: Each CESUprovides 20 GE cascade interfaces that are used to connect MPUs in LCCs. Inaddition, each CESU provides four 10-gigabit Ethernet interfaces that are used forthe CESU stack. Each MPU provides two GE interfaces that are used to connectCESUs in other CFCs.
l Cascade interface for the clock system: MPUs provide 2-Mbits clock interfaces and2-MHz clock interfaces. These interfaces are used to connect MPUs in other LCCsand CFCs.
l Management interface: including Ethernet management interfaces, consoleinterfaces, AUX interfaces, CF interfaces, and USB interfaces on MPUs.
l Clock interface: including 2-Mbits clock interfaces and 2-MHz clock interfaces onMPUs.
LCC in a Multi-Chassis SystemAn LCC in a multi-chassis system consists of a backplane, MPUs, MSFUs, PFUs, PIUs,an ADUs, power supply modules, and fan modules.
The components of an LCC in a multi-chassis system are interconnected to the backplanein the following ways:
2-3
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
l The power supplymodules supply power for other components through the backplane.l The PFUs and MSFUs are interconnected through the switching bus of the backplane
to establish a data plane.l The MPUs, MSFUs, PFUs, and ADU are interconnected through the management
bus of the backplane to establish a control and management plane.l The MPUs, MSFUs, and PFUs are interconnected through the clock bus of the
backplane to establish a clock synchronization plane.l The MPUs, power supply modules, and fan modules are interconnected through the
monitoring bus of the backplane to establish a monitoring plane.
Based on interface functions, the external interfaces provided by an LCC in a multi-chassissystem are divided into the following types:
l Inter-chassis interface in the data plane of a multi-chassis system: Each MSFUprovides 16 cascade interfaces that are used to connect CSFUs in CFCs.
l Inter-chassis interface in the control plane of a multi-chassis system: Each MPUprovides two GE cascade interfaces that are used to connect CESUs in CFCs.
l Inter-chassis interface for the clock system of a multi-chassis system: MPUs provide2-Mbits clock interfaces and 2-MHz clock interfaces. These interfaces are used toconnect MPUs in other LCCs and CFCs.
l User data interface: including interfaces (such as Ethernet interfaces and POSinterfaces) that support different speeds on PIUs.
l Management interface: including Ethernet management interfaces, consoleinterfaces, AUX interfaces, CF interfaces, and USB interfaces on MPUs.
l Clock interface: including 2-Mbits clock interfaces and 2-MHz clock interfaces onMPUs.
Cascade Connections Between ChassisIn a multi-chassis system, the cascade connections between LCCs and CFCs consist ofthree parts:
l Cascade connections in the data plane
à Cascade interfaces on MSFUs in LCCs and cascade interfaces on CSFUs inCFCs are connected through cascade optical fibers based on the specifiedrequirements to establish a three-level CLOS switch architecture. Data can beswitched between PFUs in different LCCs without being blocked.
à Each MSFU provides 16 cascade interfaces. Each LCC provides a maximum offour MSFUs, and 64 cascade interfaces in total.
à Each CSFU provides 16 cascade interfaces. Each CFC provides a maximum of16 CSFUs, and 256 cascade interfaces in total.
l Cascade connections in the control plane
Cascade interfaces on MPUs in LCCs and CFCs are connected to CESUs in CFCsthrough cascade optical fibers based on the specified requirements. A control planefabric is established to connect the MPUs, CSFUs, MSFUs, and PFUs in all LCCs andCFSs. In this way, the cascaded LCCs and CFCs establish a logical system.
2-4
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Chapter 2 Product Structure
l Cascade connections in the clock system
All clock interfaces on the MPUs in the LCCs and CFCs are connected throughcascade optical fibers based on the specified requirements. In this way, the cascadedLCCs and CFCs use the unified and synchronous clock.
For a cascade optical fiber between chassis, the length is 20 meters. The optical fiberprovides 12 pairs of fibers bidirectionally for one optical interface. A board provides amaximum of 16 optical interfaces. The speed of a single optical fiber is 6.25 Gbps.
2.1.3 Boards
MPU
The MPUs of the ZXR10 T8000 are the main control nodes that provide the managementand routing functions. The MPUs are in 1 + 1 redundancy mode. There is ahigh-performance multi-core processor in an MPU. The processor is responsiblefor calculation and maintenance of dynamic routing protocols, and system control,maintenance, configuration and management.
SFU
SFUs of the ZXR10 T8000 are the core components for unblocked service data switchingbetween boards. SFUs use the high-performance fabric CROSSBAR architecture, andare integrated with an innovative bandwidth extension solution. SPFs provide the multicastchannel management, intelligent monitoring, and global queue management functions.
MSFU
When a ZXR10 T8000 LLC is used in a multi-chassis system, MSFUs must be installedto connect CSFUs in CFCs. In this way, the MSFUs and CSFUs establish a three-levelCLOS switching matrix that is used for unblocked service data switching.
CSFU
In a multi-chassis system, CSFUs in the ZXR10 T8000 CFCs are used to connect MSFUsin LCCs. In this way, the MSFUs and CSFUs establish a three-level CLOS switchingmatrix that is used for unblocked service data switching. Each CSFU provides 16 cascadeinterfaces. Each CFC supports a maximum of 16 CSFUs.
CESU
In a multi-chassis system, the ZXR10 T8000 CFCs provide CESUs to connect to MPUsin other chassis. In this way, control and management data can be switched betweenthe MPUs in the multi-chassis system. Each CESU provides four 10-gigabit Ethernetinterfaces for the CESU stack, and 20 gigabit Ethernet interfaces for MPU cascadeconnections in the control plane. Each CFC provides a maximum of four CESUs.
2-5
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
PFU
A PFU of the ZXR10 T8000 consists of a PIU, packet forwarding module, trafficmanagement module, switch fabric interface module, and CPU control module. Thesemodules together process and forward service data, and maintain and manage linkprotocol forwarding tables and service forwarding tables. The ZXR10 T8000 providesvarious PFUs to meet different network capacity requirements. The high-performancenetwork processor chip provides line-speed processing capability. The professional trafficmanager chip provides sufficient queue resources and traffic buffering capability.
PIU
The ZXR10 T8000 supports various PIUs that provide different interface types (includingEthernet and POS), interface speeds, and numbers of interfaces. In this way, the ZXR10T8000 can meet different network and service requirements. PIUs provide externalinterfaces for service access through various types of interfaces at different speeds. APIU performs conversion between signals on physical lines and data frames at the linklayer. After a received data frame is converted into a data packet, the packet is sentto a PFU. The forwarding engine searches for the destination port, and then performshigh-speed forwarding.
GSU
The ZXR10 T8000GSUs are installed in PFU slots. GSUs provide stronger service supportcapability for complicated service and protocol processing. Based on loaded softwarepackages, GSUs provide different functions, such as NAT, and NetFlow.
2.2 Software StructureSoftware Subsystem
The ZXR10 T8000 software system consists of the following subsystems:
l OAM subsystem: The OAM subsystem provides CLI, SNMP, XML, and HTTPmanagement interfaces, so that a network management system can performunified management for the ZXR10 T8000. For upper-layer applications, the OAMsubsystem provides a management mechanism. The related management functionscan be added to services. In this way, the OAM subsystem and applications have aloose coupling relationship.
l DBS: The DBS provides a multi-process mutual exclusion mechanism to guaranteedata integrity based on conventional database systems. Concurrent database accesscan be provided in amulti-channel andmulti-core system to improve access efficiency.
l Product management subsystem: System architectures and service requirementsvary with products (or platforms), so products (or platforms) are implementedin different ways. A software system needs to provide the correspondingsupport and management functions. For the ZXR10 T8000, support andmanagement functions include internal communication, system monitoring, device
2-6
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Chapter 2 Product Structure
diagnosis, forwarding-plane management, physical configuration, distributed tablesynchronization, and drivers.
l TULIP subsystem: The TULIP subsystem provides a inter-operating system platform,the modular release function, and independent process space. The TULIP subsystemsupports dynamic loading and hot patching.
l ROS 5.0: This is the next-generation protocol stack platform of ZTE. ROS 5.0 supportsall series of data products and service products.
Software System FeaturesThe software system of the ZXR10 T8000 uses process management, and has thefollowing features:
l Provides independent memory space for each process.l Supports software failure isolation.l Limits the hardware and software resources (such as CPU, memory, and file) used by
each process.l Restarts a process independently without affecting other processes.l Supports independent upgrade for a single process.l Supports developing, loading and unloading process modules independently to meet
service customization requirements.
Figure 2-2 shows the software structure of the ZXR10 T8000.
Figure 2-2 ZXR10 T8000 Software Structure
l The software system operates in a microkernel operating system. The kernelresources of the software system are in the highest privileged mode. Applications,protocols, and service functional components operate in lower privileged modes.
l Application program failures, and illegal operations performed by applicationprograms or protocols do not affect internal resources of the operating system.
l The kernel can capture illegal operations performed by application processes, whichguarantees reliability of the operating system.
2-7
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
l Application programs operate in independent user space, and the applicationprograms are independent of each other. An illegal operation or out-of-boundmodification in a process does not affect other application processes.
2-8
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Chapter 3Functional FeaturesTable of Contents
Cluster Features.........................................................................................................3-1Layer-2 Features........................................................................................................3-1Layer-3 Features........................................................................................................3-3MPLS Features ..........................................................................................................3-3QoS Features.............................................................................................................3-4Reliability Features.....................................................................................................3-5IPv6 Features.............................................................................................................3-6Security Features .......................................................................................................3-6Clock Synchronization................................................................................................3-7Operation and Maintenance .......................................................................................3-7
3.1 Cluster FeaturesFor the cluster features of the ZXR10 T8000, refer to Table 3-1.
Table 3-1 Cluster Features of the ZXR10 T8000
Attribute Description
Capacity
extension
Supports 1 + 4 clusters.
Supports 2 + 8 clusters.
Support smooth upgrade from a single-chassis system to a
multi-chassis system.
System control Supports locating the system control module in any chassis.
Supports locating the system control modules in different
chassis in 1:1 redundancy mode.
Supports automatically electing the active system control
module.
Protocol
processing
Supports multiple logical entries in software.
Supports 1:1 redundancy mode for the logical entries.
Cluster features
Data forwarding Supports inter-chassis link binding.
Supports inter-chassis load sharing.
3.2 Layer-2 FeaturesFor the layer-2 features of the ZXR10 T8000, refer to Table 3-2.
3-1
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
Table 3-2 Layer-2 Features of the ZXR10 T8000
Attribute Description
VLAN Supports VLAN sub-interfaces.
Supports the VLAN range function on sub-interfaces.
QinQ Supports QinQ sub-interfaces.
Supports the QinQ range function on sub-interfaces.
SuperVLAN Supports SuperVLAN.
Supports VLAN IP binding.
Supports MAC IP binding.
Supports inter-board SuperVLAN.
Supports QinQ SuperVLAN.
MAC
management
Supports VPLS MAC address learning and aging.
Supports VPLS static MAC address configuration.
Supports VPLS MAC filtering.
SmartGroup Supports static port aggregation.
Supports dynamic LACP.
Supports inter-board aggregation.
Supports packet-based and traffic-based load sharing.
Supports SmartGroup sub-interface/VLAN/QinQ.
Supports unicast and multicast on SmartGroup interfaces.
Supports MPLS on SmartGroup interfaces.
Supports SmartGroup interfaces operating as VPN user
interfaces.
Supports ACL and QoS on Supports SmartGroup interfaces.
POS Supports PPP.
Supports HDLC.
Supports FR.
Supports BCP sub-interfaces.
Supports FR sub-interfaces.
POS
aggregation
Supports ML-PPP aggregation.
Supports HDLC aggregation.
Supports inter-board aggregation.
Supports packet-based and traffic-based load sharing.
Supports unicast and multicast on POS aggregate interfaces.
Supports MPLS on POS aggregate interfaces.
Supports POS aggregate interfaces operating as VPN user
interfaces.
Supports ACL and QoS on POS aggregate interfaces.
Ftorm
suppression
Supports broadcast packet suppression.
Supports multicast packet suppression.
Supports unknown-packet suppression.
Layer-2
features
3-2
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Chapter 3 Functional Features
Attribute Description
Supports dropping unknown unicast packets and unknown
multicast packets.
Supports broadcasting unknown unicast packets and unknown
multicast packets.
Supports forwarding unknown unicast packets and unknown
multicast packets through the specified interfaces.
ARP Supports static ARP configuration.
Supports dynamic ARP learning.
Supports ARP proxy.
Supports dynamic ARP entry aging.
Layer-2
multicast
Supports IGMP v1, v2, and v3.
Supports IGMP snooping and IGMP proxy.
Supports IGMP rate limit, IGMP rate filter, and IGMP rate
shaping.
Supports fast switch when IGMP failures occur.
Supports IGMP port redundancy, and multicast loading sharing.
Supports inter-VLAN multicast duplication.
Port Supports port suppression.
3.3 Layer-3 FeaturesFor the layer-3 features of the ZXR10 T8000, refer to Table 3-3.
Table 3-3 Layer-3 Features of the ZXR10 T8000
Attribute Description
IPv4 unicast
routing
Supports static routes.
Supports RIPv1, RIPv2, OSPFv2, IS-IS, and BGP-4.
Supports policy routing.
Supports load sharing.
Layer-3 IP
multicast
Supports static multicast.
Supports PIM-DM, PIM-SM, PIM-SSM, MSDP, and MBGP.
Supports PIM-SSM mapping.
Layer-3
features
Tunnel Supports GRE.
3.4 MPLS FeaturesFor the MPLS features of the ZXR10 T8000, refer to Table 3-4.
3-3
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
Table 3-4 MPLS Features of the ZXR10 T8000
Attribute Description
Basic features Supports LDP.
Supports load sharing.
Supports MPLS CAR.
Supports MPLS policies.
MPLS L2 VPN Supports VPWS.
Supports VPLS, inter-AS OptionA/B/C, and Hub/Spoke.
Supports PWE3.
Supports bridging between L2 VPNs and L3 VPNs.
MPLS L3 VPN Supports static routes, RIP, OSPF, IS-IS, and BGP.
Supports inter-AS Option A/B/C.
MPLS TE Supports OSPF TE, and IS-IS TE.
Supports RSVP-TE.
Supports DS-TE (including RDM and MAM).
Supports inter-area tunnels.
Supports inter-AS tunnels.
Supports automatic bandwidth adjustment.
Static tunnel Supports static tunnels.
MPLS features
Supports VPN. Supports PIM SSM-PIM SM and PIM SSM-GRE.
Supports VRF-PIM SM, VRF-PIM SSM, and VRF-IGMPv3.
3.5 QoS FeaturesFor the QoS features of the ZXR10 T8000, refer to Table 3-5.
Table 3-5 QoS Features of the ZXR10 T8000
Attribute Description
Traffic
classification
Supports traffic classification based on physical interface.
Supports traffic classification based on VLAN ID.
Supports traffic classification based on source IP address and
destination IP address.
Supports traffic classification based on TCP port and UDP port.
Supports traffic classification based on DSCP.
Supports traffic classification based on protocol number.
Packet
re-marking
Supports re-marking and mapping based on 802.1p
precedence, IP Precedence, IP DSCP, IP ToS, and MPLS EXP.
Supports inner and outer label mapping.
Traffic policing Supports SrTCM and TrTCM.
Supports traffic-based CAR.
QoS features
3-4
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Chapter 3 Functional Features
Attribute Description
Supports rate limit on VLAN interfaces.
Supports incoming and outgoing traffic policing.
Supports traffic re-marking after traffic policing.
Congestion
control
Supports traffic-based bandwidth control.
Supports RED and WRED.
Queue
scheduling
Supports PQ, LLQ, and CBWFQ.
Supports queue statistics.
Traffic shaping Supports GTS.
QPPB Supports IP, MPLS, and VRF.
Supports source IP address mode and destination IP address
mode.
H-QoS Supports ingress and egress H-QoS, and supports five
hierarchies.
Supports L3 VPN H-QoS, L2 VPN H-QoS, and SmartGroup
H-QoS.
IPv6 QoS Supports traffic classification.
Supports packet re-marking and mapping.
Supports PQ, WFQ, and CBWFQ.
Supports CAR.
Supports WRED.
Supports H-QoS.
MPLS QoS Supports uniform mode, pipe mode, and short-pipe mode.
3.6 Reliability FeaturesFor the reliability features of the ZXR10 T8000, refer to Table 3-6.
Table 3-6 Reliability Features of the ZXR10 T8000
Attribute Description
Reliability features Supports GR for IGP, BGP, LDP, RSVP, and PIM. Supports NSF
for IGP, BGP, LDP, RSVP, and PIM.
Supports IP FRR, LDP FRR, VPN FRR, and TE FRR.
Supports VRRP.
Supports PW redundancy.
Supports hot standby.
Supports BFD for static routing, policy routing, OSPFv2,
OSPFv3, IS-IS, IS-ISv6, BGP-4, BGP4+, and VRRP.
3-5
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
3.7 IPv6 FeaturesFor the IPv6 features of the ZXR10 T8000, refer to Table 3-7.
Table 3-7 IPv6 Features of the ZXR10 T8000
Attribute Description
IPv6 basic
features
Supports neighbor discovery, duplicate address detection,
ICMPv6, and anycast addresses.
Packet
re-marking
Supports re-marking and mapping based on 802.1p
precedence, IP Precedence, IP DSCP, IP ToS, and MPLS EXP.
Supports inner and outer label mapping.
Traffic policing Supports SrTCM and TrTCM.
Supports traffic-based CAR.
Supports rate limit on VLAN interfaces.
Supports incoming and outgoing traffic policing.
Supports traffic re-marking after traffic policing.
Congestion
control
Supports traffic-based bandwidth control.
Supports RED and WRED.
IPv6 features
Queue
scheduling
Supports PQ, LLQ, and CBWFQ.
Supports queue statistics.
3.8 Security FeaturesFor the security features of the ZXR10 T8000, refer to Table 3-8.
Table 3-8 Security Features of the ZXR10 T8000
Attribute Description
Data-plane
security
Supports IPv4 ACL and IPv6 ACL.
Supports IPv4 URPF and IPv6 URPF.
Supports DHCP snooping, IGMP snooping, and PIM snooping.
Supports MAC filtering.
Supports MAC entry quantity control.
Supports port protection.
Control-plane
security
Supports CPU security through traffic identification and
classification, multi-level rate limit, multi-level scheduling, traffic
control, attack source trace, and protocol white list.
Supports ARP attack protection, IGMP anti-attack, anti-ICMP
attack, anti-TCP SYN flooding, anti-IP spoofing, and anti-Smurf
attack.
Supports MD5 authentication for RIPv2, OSPFv2, IS-IS, BGP-4,
and LDP.
Security
features
3-6
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Chapter 3 Functional Features
Attribute Description
Management-
plane security
Supports user management (including local authentication and
authorization, RADIUS authentication and authorization, and
TACACS+ authentication and authorization).
Supports user rights classification and command privilege level
classification.
Supports log management for command logs, alarm logs, and
service logs.
Supports device access security through the maximum number
of concurrent logins, SNMP anti-attack, FTP anti-attack, telnet
anti-attack, and SSH anti-attack.
Mirroring Supports ingress mirroring, egress mirroring, and traffic
mirroring.
Netflow Supports NetFlow v5 and v9.
3.9 Clock SynchronizationFor the clock synchronization function of the ZXR10 T8000, refer to Table 3-9.
Table 3-9 Clock Synchronization Function of the ZXR10 T8000
Attribute Description
1588v2 Supports grandmaster clock, ordinary clock, boundary clock,
and transparent clock.
Clock
synchronization
Synchronous
Ethernet
Supports synchronous Ethernet.
3.10 Operation and MaintenanceFor the operation and maintenance functions of the ZXR10 T8000, refer to Table 3-10.
Table 3-10 Operation and Maintenance Functions of the ZXR10 T8000
Attribute Description
Operation and
maintenance
Supports CLI commands.
Supports creating and replicating CLI commands in batches.
Supports RMON.
Supports NTP.
Supports BOOT online upgrade.
Support password aging and confirmation.
Supports connecting a device through the console port.
Supports remote access through SSH and telnet.
Operation and
maintenance
3-7
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
Attribute Description
Supports downloading configuration files through TFTP and
FTP.
Supports alarms in multiple manners.
Supports Syslog.
Supports SNMP.
Supports the NetNumen unified network management system.
Ethernet OAM Supports IEEE 802.1ag.
Supports IEEE 802.3ah.
Supports MAC ping, MAC trace, IP ping, and IP trace.
Supports fast ICMP echo reply.
MPLS OAM Supports connectivity detection through CV and BFD.
Supports 1 + 1 protection and 1:1 protection.
Supports LSP ping and LSP trace.
Supports PW ping and PW trace.
SQA Supports service quality analyzer for ICMP, FTP, UDP, and TCP.
LLDP Supports LLDP.
3-8
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Chapter 4Networking ApplicationsTable of Contents
Core Node in IP/MPLS Backbone Networks ...............................................................4-1Metropolitan Area Network Egress .............................................................................4-1Internet Egress Gateway ............................................................................................4-2
4.1 Core Node in IP/MPLS Backbone NetworksBased on large bandwidth, large capacity, and high stability, the ZXR10 T8000 can operateas a core router and P router in IP/MPLS backbone networks or a BGP RR. The ZXR10T8000 can be used to establish flattening and high-availability backbone networks.
Figure 4-1 shows an application scenario where the ZXR10 T8000 operates as a corenode in an IP/MPLS backbone network.
Figure 4-1 Core Node in an IP/MPLS Backbone Network
4.2 Metropolitan Area Network EgressThe ZXR10 T8000 can operate as an egress router of metropolitan area networks.Sufficient high-speed interfaces and extremely-large cluster capacity facilitate egressbandwidth extension. Figure 4-2 shows an application scenario.
4-1
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
Figure 4-2 Metropolitan Area Network Egress
1. PoP: Point of Presence
4.3 Internet Egress GatewayBased on large bandwidth, large route capacity, and high availability, the ZXR10 T8000can operate as an Internet egress gateway that provides high-speed and stable Internetaccess capability. Figure 4-3 shows an application scenario.
Figure 4-3 Internet Egress Gateway
1. ISP: Internet ServiceProvider
2. IGW: Interworking Gateway
4-2
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Chapter 5Environmental RequirementsTable of ContentsPower Supply Requirements ......................................................................................5-1Operating Requirements ............................................................................................5-3Transportation Environment .......................................................................................5-4Storage Environment..................................................................................................5-5
5.1 Power Supply RequirementsDC Power Supply RequirementsWhen the ZXR10 T8000 uses a DC power supply, the requirements are as follows:
l The power supply screen (meaning the power supply source) must supply powerstably and reliably. The power supply screen should be located close to the device,so that the DC power cable from the power supply screen to the device is as short aspossible. This reduces electric energy loss and saves installation costs.
l The DC power supply screen must comply with standards. The output voltage mustbe within the normal range of the device. The storage battery must be able to supplypower for at least one hour.
l If the communication capacity of the equipment room is large, or if there are devices fordifferent communication systems, multiple independent power supply screens shouldbe used to supply power for the devices, meaning scattered power supply. If severaldevices share the same power supply screen, the power supply for the devices shouldbe controlled at different levels through separate circuits. This prevents a fault on onedevice from affecting normal operation of other devices. The power supply capabilityof the power supply screen must meet the requirements for the situation when thedevices operate properly with a full load.
l The device operates in 1 + 1 redundancy mode, so an independent power supply forthe redundant devices is required.
l For a large-scale communication junction center, independent power supply systemscan be provided based on floors to supply power for the devices in the equipmentrooms.
For the technical parameters of the DC power supply, refer to Table 5-1.
Table 5-1 Technical Parameters of the DC Power Supply
Item Description
Fluctuation range of the voltage
at the –48 V input end
–38 V to –72 V.
5-1
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
Item Description
Capability of bearing impulse
current
Greater than 1.5 times of the rated current.
Regulated voltage precision When the AC input voltage is between 85% and 110% of the rated
voltage, the load current is between 5% and 100% of the rated
current, and the output voltage of a rectifier between –46.0 V and
56.4 V, the regulated voltage precision is equal to or smaller than
1%.
Turn-on overshoot amplitude
and turn-off overshoot amplitude
≤ ±5% of the DC output voltage.
Peak-to-peak noise voltage ≤ 200 mV.
Dynamic response The recovery period is less than 200 ms. The overshoot is smaller
than or equal to ±5% of the DC output voltage.
AC Power Supply Requirements
When the ZXR10 T8000 uses an AC power supply, the requirements are as follows:
l The AC power supply screen can supply power stably and reliably in anyenvironmental condition. Each output to the device meets full-load powerrequirements and derated power requirements.
l if there are devices for different communication systems, scattered power supplymode should be used.
l A TN-S power distribution system should be used in the AC power supply system.l It is recommend that the power of the device should be provided by two outputs of the
power supply screen for 1 + 1 redundancy.
For the technical parameters of the AC power supply, refer to Table 5-2.
Table 5-2 Technical Parameters of the AC Power Supply
Item Description
Power supply for the device –10% to 5% of the rated voltage.
Power supply for power modules
and important buildings
–15% to 10% of the rated voltage.
AC frequency –4% to 4% of the rated voltage.
Sine wave distortion rate of the
voltage
≤ 5% of the rated voltage.
5-2
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Chapter 5 Environmental Requirements
5.2 Operating RequirementsClimatic Environment Requirements
For the climate environment requirements for operation of the ZXR10 T8000, refer to Table5-3.
Table 5-3 Climate Environment Requirements for Operation of the ZXR10 T8000
Item Description
Temperature –5 ºC to 45 ºC
Humidity 5%–90%, noncondensing
Altitude ≤ 5000 m
Noise < 70 dB
Air pressure 70 kPa to 106 kPa
Temperature change rate ≤ 5 ºC/h
Solar radiation ≤ 700 W/s2
Heat radiation ≤600 W/s2
Wind speed ≤ 1 m/s
Ingress protection level IP 50
Air Cleanliness Requirements
For the air cleanliness requirements for operation of the ZXR10 T8000, refer to Table 5-4.
Table 5-4 Air Cleanliness Requirements for Operation of the ZXR10 T8000
Object Unit Value
Suspended dust mg/m3 0.2
Deposited dust mg/(m2h) 1.5
Grit mg/m3 30
SO2 mg/m3 Average: 0.3, maximum: 1.0
H2S mg/m3 Average: 0.1, maximum: 0.5
NH3 mg/m3 Average: 1.0, maximum: 3.0
Cl2 mg/m3 Average: 0.1, maximum: 0.3
HCl mg/m3 Average: 0.1, maximum: 0.5
HF mg/m3 Average: 0.01, maximum: 0.03
O3 mg/m3 Average: 0.05, maximum: 0.1
NOx mg/m3 Average: 0.5, maximum: 1.0
5-3
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
Other RequirementsOther requirements for operation of the ZXR10 T8000 are as follows:
l The environment in which the device operates is free from rodents.l The device must be grounded reliably, and the ground resistance is less than 5 Ω.l The positioning moving vibration should be less than 5 mm during device operation.l The building, shockproof, and fireproof requirements of the equipment room must
comply with the local laws and regulations.
5.3 Transportation EnvironmentClimatic Environment RequirementsFor the climate environment requirements for transportation of the ZXR10 T8000, refer toTable 5-5.
Table 5-5 Climate Environment Requirements for Transportation of the ZXR10 T8000
Item Description
Temperature –40 ºC to 70 ºC
Humidity 0–95%, noncondensing
Altitude ≤ 5000 m
Air pressure 70 kPa to 106 kPa
Temperature change rate ≤ 3 ºC/min
Solar radiation ≤ 1120 W/s2
Heat radiation ≤ 600 W/s2
Wind speed ≤ 30 m/s
Air Cleanliness RequirementsFor the air cleanliness requirements for transportation of the ZXR10 T8000, refer to Table5-6.
Table 5-6 Air Cleanliness Requirements for Transportation of the ZXR10 T8000
Object Unit Value
Suspended dust mg/m3 –
Deposited dust mg/(m2h) 3.0
Grit mg/m3 100
SO2 mg/m3 Average: 0.3, maximum: 1.0
H2S mg/m3 Average: 0.1, maximum: 0.5
NH3 mg/m3 Average: 1.0, maximum: 3.0
Cl2 mg/m3 Average: 0.1, maximum: 0.3
5-4
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Chapter 5 Environmental Requirements
Object Unit Value
HCl mg/m3 Average: 0.1, maximum: 0.5
HF mg/m3 Average: 0.01, maximum: 0.03
O3 mg/m3 Average: 0.05, maximum: 0.1
NOx mg/m3 Average: 0.5, maximum: 1.0
Other Requirements
Other requirements for transportation of the ZXR10 T8000 are as follows:
l The acceleration shock during transportation should be less than 40.0 m/s2.l Package boxes are intact.l Protect the device against water. Rainproof facilities should be available to ensure
that no rain water enters the package boxes.l Do not open package boxes during transportation.l Prepare sufficient manpower for carrying the device. Handle gently, and prevent it
from falling.
5.4 Storage EnvironmentClimatic Environment Requirements
For the climate environment requirements for storage of the ZXR10 T8000, refer to Table5-7.
Table 5-7 Climate Environment Requirements for Storage of the ZXR10 T8000
Item Description
Temperature –40 ºC to 70 ºC
Humidity 0–95%, noncondensing
Altitude ≤ 5000 m
Air pressure 70 kPa to 106 kPa
Temperature change rate ≤ 1 ºC/min
Solar radiation ≤ 1120 W/s2
Heat radiation ≤ 600 W/s2
Wind speed ≤ 30 m/s
Air Cleanliness Requirements
For the air cleanliness requirements for storage of the ZXR10 T8000, refer to Table 5-8.
5-5
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
Table 5-8 Air Cleanliness Requirements for Storage of the
Object Unit Value
Suspended dust mg/m3 0.2
Deposited dust mg/(m2h) 1.5
Grit mg/m3 30
SO2 mg/m3 Average: 0.3, maximum: 1.0
H2S mg/m3 Average: 0.1, maximum: 0.5
NH3 mg/m3 Average: 1.0, maximum: 3.0
Cl2 mg/m3 Average: 0.1, maximum: 0.3
HCl mg/m3 Average: 0.1, maximum: 0.5
HF mg/m3 Average: 0.01, maximum: 0.03
O3 mg/m3 Average: 0.05, maximum: 0.1
NOx mg/m3 Average: 0.5, maximum: 1.0
Other Requirements
Other requirements for storage of the ZXR10 T8000 are as follows:
l The environment in which the device operates is free from rodents.l There is no water on the ground, and no water is drained to package boxes.l Package boxes are not exposed to direct sunlight for a long time.l The building, shockproof, and fireproof requirements of the storage roommust comply
with the local laws and regulations.
5-6
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Chapter 6StandardsTable of Contents
Security Standards .....................................................................................................6-1Environmental Standards ...........................................................................................6-1EMC Standards..........................................................................................................6-1
6.1 Security StandardsThe ZXR10 T8000 complies with the following security standards:
l UL 60950l IEC 60950l EN 60950
6.2 Environmental StandardsThe ZXR10 T8000 complies with the following environmental standards:
l Storage environment standards: ETS300 019-1-1l Transportation environment standards: ETS300 019-1-2l Operating environment standards: ETS300 019-1-3
6.3 EMC StandardsEMC means the compatibility that a device or a system can operate properly in anenvironment with electro-magnetic interference, and does not produce electro-magneticinterference that other devices in the environment cannot bear.
The ZXR10 T8000 complies with the following EMC standards:
l EN 300386l EN 55024l EN 55022l IEC 61000-4l CISPR 22l FCC PAR15
6-1
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
This page intentionally left blank.
6-2
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
FiguresFigure 2-1 Front External View of the ZXR10 T8000 Chassis.................................... 2-2
Figure 2-2 ZXR10 T8000 Software Structure ............................................................ 2-7
Figure 4-1 Core Node in an IP/MPLS Backbone Network ......................................... 4-1
Figure 4-2 Metropolitan Area Network Egress........................................................... 4-2
Figure 4-3 Internet Egress Gateway.......................................................................... 4-2
I
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Figures
This page intentionally left blank.
II
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
TablesTable 3-1 Cluster Features of the ZXR10 T8000 ....................................................... 3-1
Table 3-2 Layer-2 Features of the ZXR10 T8000 ...................................................... 3-2
Table 3-3 Layer-3 Features of the ZXR10 T8000 ...................................................... 3-3
Table 3-4 MPLS Features of the ZXR10 T8000......................................................... 3-4
Table 3-5 QoS Features of the ZXR10 T8000 ........................................................... 3-4
Table 3-6 Reliability Features of the ZXR10 T8000 ................................................... 3-5
Table 3-7 IPv6 Features of the ZXR10 T8000 ........................................................... 3-6
Table 3-8 Security Features of the ZXR10 T8000...................................................... 3-6
Table 3-9 Clock Synchronization Function of the ZXR10 T8000 ................................ 3-7
Table 3-10 Operation and Maintenance Functions of the ZXR10 T8000.................... 3-7
Table 5-1 Technical Parameters of the DC Power Supply.......................................... 5-1
Table 5-2 Technical Parameters of the AC Power Supply.......................................... 5-2
Table 5-3 Climate Environment Requirements for Operation of the ZXR10T8000 ...................................................................................................... 5-3
Table 5-4 Air Cleanliness Requirements for Operation of the ZXR10 T8000.............. 5-3
Table 5-5 Climate Environment Requirements for Transportation of the ZXR10T8000 ...................................................................................................... 5-4
Table 5-6 Air Cleanliness Requirements for Transportation of the ZXR10T8000 ...................................................................................................... 5-4
Table 5-7 Climate Environment Requirements for Storage of the ZXR10T8000 ...................................................................................................... 5-5
Table 5-8 Air Cleanliness Requirements for Storage of the ....................................... 5-6
III
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Tables
This page intentionally left blank.
IV
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
GlossaryACL- Access Control List
ADU- Alarm Display Unit
ARP- Address Resolution Protocol
ATM- Asynchronous Transfer Mode
BCP- Bridging Control Protocol
BFD- Bidirectional Forwarding Detection
BGP-4- Border Gateway Protocol-4
CAR- Committed Access Rate
CBWFQ- Class Based Weighted Fair Queuing
CESU- Central Ethernet Switch Unit
CFC- Central Fabric Chassis
CLI- Command Line Interface
CSFU- Central Switch Fabric Unit
CV- Connectivity Verification
DBS- Database Subsystem
DHCP- Dynamic Host Configuration Protocol
DS-TE- DiffServ-Aware Traffic Engineering
V
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
DSCP- Differentiated Services Code Point
EMC- Electromagnetic Compatibility
FR- Frame Relay
FRR- Fast Reroute
FTP- File Transfer Protocol
GR- Graceful Restart
GRE- General Routing Encapsulation
GSU- General Service Unit
GTS- Generic Traffic Shaping
H-QoS- Hierarchical-QoS
HDLC- High-level Data Link Control
HTTP- Hypertext Transfer Protocol
IEEE- Institute of Electrical and Electronics Engineers
IGMP- Internet Group Management Protocol
IPv6- Internet Protocol Version 6
IS-IS- Intermediate System-to-Intermediate System
LACP- Link Aggregation Control Protocol
LCC- Line Card Chassis
LCD- Liquid Crystal Display
VI
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Glossary
LDP- Label Distribution Protocol
LLDP- Link Layer Discovery Protocol
LLQ- Low Latency Queueing
MAC- Media Access Control
MAM- Maximum Allocation Model
MBGP- Multiprotocol Border Gateway Protocol
MD5- Message Digest 5 Algorithm
ML-PPP- Multilink-Point to Point Protocol
MPLS- Multiprotocol Label Switching
MPU- Management Process Unit
MSDP- Multicast Source Discovery Protocol
MSFU- Multistage Switch Fabric Unit
NAT- Network Address Translation
NSF- Non-Stop Forwarding
NSR- Nonstop Routing
NTP- Network Time Protocol
OAM- Operation, Administration and Maintenance
OSPF- Open Shortest Path First
PFU- Packet Forwarding Unit
VII
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
PIM-DM- Protocol Independent Multicast - Dense Mode
PIM-SM- Protocol Independent Multicast - Sparse Mode
PIM-SSM- Protocol Independent Multicast-Source Specific Multicast
PIU- Physical line Interface Unit
POS- Packet Over SONET/SDH
PPP- Point-to-Point Protocol
PQ- Priority Queuing
PW- Pseudo Wire
PWE3- Pseudo Wire Emulation Edge-to-Edge
QPPB- QoS Policy Propagation through the Border Gateway Protocol
QoS- Quality of Service
RADIUS- Remote Authentication Dial In User Service
RDM- Russian Dolls Model
RED- Random Early Detection
RIP- Routing Information Protocol
RMON- Remote Monitoring
ROS- Router Operating System
RR- Router Reflector
RSVP-TE- Resource Reservation Protocol - Traffic Engineering
VIII
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
Glossary
SC- System Control (Card)
SFU- Switch Fabric Unit
SNMP- Simple Network Management Protocol
SSH- Secure Shell
SrTCM- Single-rate Three Color Marker
TACACS+- Terminal Access Controller Access-Control System Plus
TCO- Total Cost of Ownership
TCP- Transmission Control Protocol
TE- Traffic Engineering
TFTP- Trivial File Transfer Protocol
TULIP- Telecom Universal Integrated Platform
ToS- Type of Service
TrTCM- Two-rate Three Color Marker
UDP- User Datagram Protocol
URPF- Unicast Reverse Path Forwarding
VLAN- Virtual Local Area Network
VPLS- Virtual Private LAN Service
VPN- Virtual Private Network
VPWS- Virtual Private Wire Service
IX
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential
ZXR10 T8000 Product Description
VRF- Virtual Route Forwarding
VRRP- Virtual Router Redundancy Protocol
WRED- Weighted Random Early Detection
XML- Extensible Markup Language
X
SJ-20131010093537-003|2013-10-30 (R1.0) ZTE Proprietary and Confidential