Curaflex®P I P E D U C T S Y S T E M

wall opening

Installation of pipe sleeve Curaflex 8000

Installation sketch for Curaflex® pipe sleeve 8000.

Please note: On split version of pipe sleeve Curaflex® 8000/T Sikaflex adhesive must also be applied on the faces (X) and on the lugs (X) of the split sleeve.

fastening plate construction

plate construction

How to proceed

Pre-assemble system to mark where to screw down the plate construction.

Set drills and dowels.

Apply Sikaflex adhesive (Accessory Curaflex® 1751*)

How to proceed:1. Pre-assemble system to mark where to screw down the plate construction2. Remove system and set drills and dowels3. Apply Sika primer (Accessory Curaflex® 1750*)4. Apply Sikaflex adhesive (Accessory Curaflex® 1751*)

Apply Sika primer (Accessory Curaflex® 1750*)

5. Degrease the rear of the metal plate ( = fixed flange), all faces and lugs (Accessory Curaflex® 1749*)6. Mount fixed flange to the wall

Installation of gasket inserts according toseparate instructions.

*Accessories, must be ordered separately

X

Diameter drill hole

wall opening