Proposed Corporate Structure Universal Building Solutions International Intellectual Property Owner. Universal Building Solutions Advanced Technologies Marketing – Design – Development. Universal Building Solutions - Master Licensee Master Licensee Country. Universal Building Solutions - Sub – Licensee Territory licensee within a Country.

Global warming, pollution and land degradation should be of a concern to all of us as we only have one planet to live on.

Mankind has been destroying the Earth to obtain its natural resources for centuries and now at an

ever increasing rate as the worlds population grows. We have already brought to extinction countless species of animals and destroyed 90% of the

planets natural rain forests. Over cultivated our valuable farm lands, turning the land barren as salinity rises, which is then

unable to support crop growth or pastures for grazing. Over fished and polluted our seas and rivers, depleted our fresh water supplies by global warming

and climate change. Many of our major cities have air that is so full of pollutants it’s hardly fit to breathe and this

pollution is causing dramatic health issues for the population which in turn increases the strain on our medical services.

One wonders where its all going to end ?

UBS set out on a mission to develop a Construction System that would reduce the amount of

carbon emissions into our atmosphere and decrease the total amount of raw materials used in construction.

UBS Advanced Technologies has developed a exceptional building solution system that helps combat environmental issues associated within the construction Industry.

We have addressed the issues of both manufacturing building materials and how

these materials are used within the construction process itself. Our new advanced building system is not only superior, reducing build times by up

to 70%, its also extremely cost effective, with savings on construction starting at around 30% to 50% below normal conventional building costs.

Delivering buildings that are structurally stronger, energy efficient and

environmentally friendly . Architects, Engineers and construction professionals can easily understand this

technology as its internal structure works on the principal of Column and Beam. Advancements with our technology have made the system so easy to use that

semi – skilled workers can construct a building with ease.

UBS has developed manufacturing system to produce a range of building materials from the one fully adjustable versatile plant.

1) Wall block and panel systems 2) Fence panels – including LED lighting where required (panels only 40mm thick) 3) Flooring panels – suspended slab integrated formwork where the underside

becomes the ceiling of the room below. 4) Roofing panels - that can become the ceiling of the room below. 5) Columns and Beams - sizes as required 6) Under slab pod system – which reduce the amount of concrete used. 7) MGO wall board and MGO structural flooring boards A large number of additional products can be manufactured if required. For

example: 1) Interior wall insulation 2) Roofing insulation 3) Foundation insulation Total versatility and flexibility with simple adjustments to the machines.

MGO cements are a ancient

building material developed hundreds of years ago.

Some of today's oldest structures still standing today used this material within its construction due to its extreme strengths, durability and longevity.

The Great Wall of China was constructed using MGO cement to bind its bricks together as did many of the oldest buildings throughout Europe.

Taipei 101- until recently the tallest building in the world used MGO panels on all 101 floors inside and outside.

MGO cements are the way forward in construction .

Over 60% of carbon dioxide emissions from industrial processes in 2006 is attributed to cement manufacture.

That is one of the reasons why MGO cements are considered Green , they do not add excess carbon dioxide emissions the same as cement.

As a insulation EPS is second to none , it will not lose any of its thermal resistance with age.

EPS withstands in situ

freeze – thaw cycles without loss of structural integrity.

EPS will not readily

absorb moisture from the atmosphere

EPS applications are especially beneficial in diminishing noise transmission in structures such as hotels, condos, multi-family buildings, theatres and structures built near airports and busy roads.

EPS insulation will greatly reduce both heating and cooling costs of you building, there is no better insulation than EPS . It will not lose any of its qualities over time.

UBS blocks can be finished with virtually any type of finishing product required.

The photo on the left shows a textured paint , flat Paint and tiled Finish on our display walls.

Tiles can be applied directly to the machine finished blocks with a normal tile adhesives.

Very little preparation is needed to apply painted finishes,.

UBS has developed a channel system which fits to the UBS blocks similar to how children's Lego fits together.

This provides complete flashing to all windows and doors when they are installed.

Further development will see these frames made from a fire retarded extra strong extruded PVC material,.

Currently we are using rolled steel. Frame.

Windows and door frames are made to measure and simply fixed into position within the UBS frame.

Its extremely fast and

easy to install the required doors or windows.

With a little silicone applied they can never leak.

The following slides highlight a few of the differences between UBS Advanced Technology innovative eco friendly building system and conventional building practices.

Our new Technology is designed to build stronger low energy consumption buildings without compromise to its structural integrity.

The UBS system will deliver buildings that can be

completed in a fraction of the time and cost than it would take to build with traditional construction methods.

BRICKS OR BLOCKS ARE CEMENTED TO SLAB

UBS BLOCKS ARE ATTACHED TO THE SLAB WITH CEMENT CONCRETE AND STEEL

RENDERED ON SITE PRE FINISHED & COATED IN FACTORY

CRACKING ON A 6 YEAR OLD BUILDING THAT BEEN CEMENT RENDERED

UNIQUE BLOCK COATING METHOD FIBERGLASS MESH REINFORCED TO MINIMIZE CRACKING AND REDUCE MAINTENANCE

TIMBER FRAME STUD WALL PRE FINISHED BLOCKS

BRICKS LAID INDIVIDUALLY BLOCKS EQUAL TO HUNDREDS OF BRICKS LAID AT ONE TIME

BLOCK LAYING - HEAVY AND SLOW WORK

35KG LIGHT WEIGHT BLOCKS 1 METER X 2 METER

MANUFACTURED ON SITE DELIVERED TO SITE

HEAVY MACHINE HIRE LIGHT WEIGHT 57 KG

CUTTING BRICKWORK TO INSTALL SERVICES.

SERVICES INSTALLED PRIOR TO CONCRETE BEING POURED

CONVENTIONAL FORM WORK IN SITU FORM WORK

CEMENT RENDER MGO COATING 2-3 TIMES STRONGER THAN CEMENT

INSULATION BETWEEN BRICKS

COATING – INSULATION – REINFORCED CONCRETE – INSULATION - COATING

MAINTENANCE ISSUES DESIGNED TO MINIMIZE MAINTENANCE ISSUES

DAMP WALL AFTER ONLY SIX MONTHS CONSTRUCTION

COATING FORMULATED TO PREVENT DAMP WALL

FORMWORK NEEDS TO BE BUILT THEN REMOVED AFTER THE CONCRETE IS POURED

UBS PANELS ARE INTEGRATED FORMWORK , PRE FINISHED AND DESIGNED TO REMAIN IN PLACE

WINDOW AND DOOR FRAMES FITTED DURING CONSTRUCTION AND ARE SUBJECT TO DAMAGE

WINDOWS AND DOORS CAN BE FITTED INTO THE SPECIALLY DESIGNED FRAME IN ONE DAY AFTER CONSTRUCTION IS COMPLETED

Our systems and products have been designed to improve the structural integrity of any building or construction project.

We have accomplished this without adding any cost to construction, in fact we have greatly reduced costs and provide a far superior building system.

Its our belief that we have covered every aspect of

the building and construction process with this innovative technology.

UBS has developed extra strong coatings for its construction material system.

Using specially formulated Magnesium Oxide based mixtures that provide , mold , mildew, insect , water and fire resistance, with a strength far stronger than cement coatings.

The coating is considered eco

friendly and good for the environment.

Its extremely safe to use – unlike cement based materials.

This Simple display shows how

structural our blocks are once they have been filled with concrete and reinforcing steel.

We have simply cut away one side of a section on one of our Blocks to give you an internal view of the concrete structure.

Footing ,walls and roofing are

all designed to be connected with steel reinforced concrete Providing a structure not unlike a roll cage for a race car !

UBS Advanced Technology has developed a total building system to which there are no limits to what the system can be used for in construction.

Industrial & Commercial – Factories,

Warehouses, Shopping Centers, Resorts, Hotels. Renovations and extensions.

Housing – Every style of housing you can

imagine.

“UBS is the total building system of the future”

Currently we are seeking financial partners / Investors to develop the system and its intellectual property worldwide via the sale of licensing agreements.

We are seeking licensees for the technology and

manufacturing systems in countries worldwide. Our belief is the Universal Building Solutions system has

unlimited potential for all the construction industries needs.

Walls , fences , home improvements, additions, domestic, commercial and industrial construction applications.

Applications that UBS Advanced Technology materials and

construction methods have already developed for the construction industry are ENDLESS !

Darryl James Heffernan CEO: Universal Building Solutions Phone : Vietnam +84944536599 Email : darrylheffernan@ymail.com : darrylheffernan@hotmail.com SKYPE : darryl_heffernan