7% )5 7% )5 7% )5...engine and routine inspection points. ( note: release cable is located behind...

PRODUCT GUIDETB138FR, TB153FR, TB180FR

– 80 –TB250TB138FRTB235TB108 TB016 TB228

TB138FRTB153FRTB180FR

zero swing Hydraulic excavators

TB138FR

The TB138FR, TB153FR and TB180FR zero swing excavators make up the “Full Rotation” series from Takeuchi. The patented side-to-side (STS) offset boom system combined with the tight tail swing enables the FR Series excavators to rotate a full 360° with very little overhang. Their low center of gravity and optimized counterweight placement creates an extremely stable

platform with the craning and lifting capabilities of conventional excavators.

The exclusive side-to-side (STS) offset boom system makes the FR

Series excavators the perfect choice when you need power

and performance and the capability to work in tight

spaces.

– 81 –TB153FR TB180FR TB285 TB1140

KEy fEaturEsTB138FR, TB153FR, TB180FR Zero Swing Hydraulic Excavators

KEY FEATURES

1. Exclusive Side-to-Side (STS)boom provides outstanding versatility, stability and unparalleled visibility to the work equipment when compared to a machine equipped with a swing boom.

2. Unmatched machine capabilities of the FR SERIES allow the boom to fully raise over center which allows the machine to turn a full revolution in a very tight turning radius.

3. Large counterweight offers wrap around protection and contributes to the machines excellent stability.

4. Excellent stability and visibility in the offset position is provided by the exclusive Side-to-Side boom and its relation to the operator and machine.

5. Reinforced long arm provides exceptional reach, power, and dig depth.

6. Tilt-up cab and large heavy gauge covers provide excellent access to components and maintenance points.

7. High performance cooling system and long life coolant help ensure proper operation in demanding conditions.

8. Progressive pilot controls provide smooth and precise control while the proportional slide switch for auxiliary hydraulics increases the machines versatility.

9. Dual pin position bucket provides a power dig position for tough applications and a curl position to maximize productivity.

10. Two year / 2,000 hour full machine warranty lets you work with confidence knowing your excavator is protected by one of the most comprehensive warranties in the industry today.

TB180FRTB153FR

– 82 –TB250TB138FRTB235TB108 TB016 TB228

• Pre-Delivery Inspection (PDI) should be performed prior to machine delivery to ensure maximum machine function and performance.

• Fuel and lubrication should be checked prior to delivery so there are no unexpected interruptions; proper lubrication will help ensure there are no unusual sounds during machine operation.

• Ensure all controls and circuits function properly and that they are crisp and responsive.

• Buckets and attachments should be installed properly.

• Clean the machine thoroughly and remove all plastic and protective coverings from the seat and control levers; the machine should look new as if it were being delivered to the customer.

• Clean and adjust the mirrors for optimum visibility.

• Slide the seat to its farthest rearward position so the customer can appreciate the spaciousness of the operator's compartment.

• Raise the seat to its highest position so you can demonstrate the multiple height adjustments.

• Safety lockout lever should be in the upright position so you can explain its function at the appropriate time.

• Engine hood and covers should be unlocked and remain closed until you are ready to discuss.

• Review the operator's manual to ensure that YOU know and understand all machine features, their function and benefits.

• Position the machine properly to allow for an orderly presentation. Takeuchi recommends the following:

1. Position the blade in front of the machine to allow easier viewing and access around the machine.

2. Adjust the boom swing as if you were digging in line with the right track so you can demonstrate how the machine can be positioned close to a wall or obstruction.

3. Rotate the house approximately 20°– 30° so the track frame may be used as a step for easy entry / egress and to demonstrate the visibility when operating close to a wall or obstruction.

4. Position the arm at approximately a 90° angle to the boom so that the arm is perpendicular to the ground.

5. If equipped with a pin-on bucket, position it so that it's resting flat on the ground.

6. Bucket coupler – if equipped with a bucket coupler, remove the bucket and set it beside the arm so that you can demonstrate the function at the appropriate time. Place the arm on the ground.

MACHINE PREPARATION

TB138FR

– 83 –TB153FR TB180FR TB285 TB1140

• Bucket pin seals and o-rings help keep dirt and contaminants out of critical wear points.

• Dual pin position bucket provides a power dig position for tough applications and a curl position to maximize productivity. The general recommendation is to place in the curl position (hole nearest the main pin) to allow better range of motion and faster cycles.

• Grease points are located down one side of the boom and arm for easy access, and should be greased daily.

• Attachment interference prevention system slows and then stops the boom according to the position of the attachment selection switch located inside the cab, and a mechanical fail safe provides an additional level of protection.

• Large pins and bushings for superior durability.

• Bi-directional auxiliary lines include shut-off valves to provide attachment versatility. FLoW RaTE: TB138FR 15.6 gpm TB153FR 25.6 gpm TB180FR 36.6 gpm (primary) 15 gpm (secondary)

• Steel hydraulic lines used extensively for greater durability and the hydraulic lines are routed to ensure long life.

• Cushioned arm, boom and swing cylinders, reduce shock to the operator and increase durability.

• Heavy duty boom with internal and external gusset reinforcements for greater strength.

• Side-to-Side (STS) Boom provides unequalled visibility to the work equipment and it allows the machine to operate in very confined areas and rotate 360° just inches beyond the width of the track.

• STS Boom Design greatly enhances machine stability by allowing more of the rear counterweight to stay over the center of the undercarriage.

• Heavy duty frame structure prevents twisting and uses four very large pins to distribute the forces to the machine frame through the oversized box reinforced offset arms for the ultimate in reliability.

• Over center boom design enables a very tight turning circle and the heavy duty boom cylinder guard helps protect it from damage.

• Standard boom holding valve (TB153FR and TB180FR) helps maintain load control in the event of a hose failure / loss of pressure.

ARM AND BOOM

product dEtaIlsTB138FR, TB153FR, TB180FR Zero Swing Hydraulic Excavators

TB180FRTB153FR

– 84 –TB250TB138FRTB235TB108 TB016 TB228

• Blade frame features heavy duty rectangular steel tubing and substantial gusset reinforcements to enhance durability and prevent bending and twisting.

• Blade design enhances productivity due to its height and curvature which allows it to hold and push a large volume of material.

• Large tie down points on the right and left side of the blade and on the rear of the track frame make it easy to secure for transport.

• Three lifting points are provided; two are located on the blade and a third is located in the curve of the boom for easy craning and machine placement.

• K-frame design reduces the build-up of dirt and debris and provides outstanding ground clearance.

• Triple flange track rollers limit the potential for de-tracking due to multiple contact points.

• Automatic two-speed travel shifts automatically to high torque mode when a load is encountered.

• Planetary drives generate a great amount of traction force allowing the machine to power through tough applications.

Initial 250 hours, then every 1000 hours.

• Two track options: Rubber or wide steel (NOTE: steel tracks are drilled to accept aftermarket bolt-on pads).

• Track tension (TB138FR and TB153FR) easily adjusted using a grease gun.

• Auto track tensioning system (TB180FR) adjusts tension automatically in high speed mode.

• Long undercarriage enhances stability by putting more track surface in contact with the ground.

• Large slew bearing provides excellent stability and durability over the life of the machine.

BLADE AND UNDERCARRIAGE

TB138FR

= Service Interval

– 85 –TB153FR TB180FR TB285 TB1140


• Heavy gauge steel construction of Takeuchi body panels ensures durability and protects engine and hydraulic components from damage.

• Lockable toolbox provides secure storage.

• High capacity steel hydraulic tank when filled with Takeuchi Genuine Hydraulic Oil extends oil change intervals reducing maintenance costs.

Up to 4000 hours.

• Hydraulic return filter is located inside the tank for easy servicing.


• Hinged side panel allows easy access to the radiator and oil cooler and includes large air vents that are covered by screens to help keep debris out of the coolers.

• Side-by-side radiator and oil cooler are very efficient and provide outstanding cooling performance ensuring long component life and are easy to inspect and clean.

• Cab models feature a hinged condenser mount that allows greater access to coolers when needed.

• Hydraulic sight glass provides quick ground level check of the fluid level.

• Battery disconnect allows you to easily prevent battery drain or unwanted machine movement.

• Travel alarm is standard safety equipment on all Takeuchi excavators.

RIGHT SIDE

TB180FRTB153FR

– 86 –TB250TB138FRTB235TB108 TB016 TB228

REAR • Wrap around counterweight provides outstanding

stability and protects vital components while producing minimal overhang beyond the tracks.

• Rear tilt-up hood features full width access to the engine and routine inspection points. (NOTE: release cable is located behind the right side panel.)

• EPA Interim Tier 4 compliant engines are quiet, economical, and provide exceptional power.

• Dual element air cleaners are easy to inspect and replace.

• Automatic fuel bleed system eliminates need for a costly service call if machine runs out of fuel.

• Provides access to fuel water separator and high capacity fuel filter to simplify fuel system maintenance.

Every 500 hours.

• Long life coolant reduces maintenance and preserves the efficiency of the cooling system.

Every 1000 hours.

• Fuel fill with locking cap allows for easy fill ups and is also equipped with an overflow catch and lower tank drain: TB138FR – Right Side. TB153FR and TB180FR – Rear.

• Diagnostic test ports are provided at the hydraulic pump to assist technicians.

• Pilot filter ensures clean oil is provided to the precision joystick controls for longer component life.


TB138FR

– 87 –TB153FR TB180FR TB285 TB1140

HELPFUL TIPSee operator's manual for complete instructions


• Tilt-up operator platform provides outstanding access to the starter, alternator, main hydraulic valve, hydraulic lines, accumulator and slew motor.

• Fuel level sight gauge allows easy inspection of fuel level.

• Large grab handles and step enable the operator to easily and confidently enter and exit the operator's station.

• Pilot accumulator allows trapped pressure to be released making it easier to change hydraulic attachments and work equipment may be lowered with the engine off.

• Lever lock folds up to lock controls and to provide greater access into, and out of the operator's station.

LEFT SIDE

1. Prior to your walk around and demonstration, make sure you have the tools and ability to loosen the left side cover using a 13 mm wrench and the two bolts inside the engine compartment using a 22 mm socket.

2. Once at the site, loosen both bolts leaving them hand tight so you can easily remove them during the walk around while explaining their location and ease of access.

3. Before tilting the cab, make sure the boom is positioned to provide adequate clearance for the operator's station to be tilted forward.

4. After removing the hardware and tilting the operator's platform, demonstrate how the safety support device (yellow bar under platform) functions prior to looking under or moving under the raised platform.

5. Show the customer how much access is available to the hydraulic valve, hoses, slew motor, and swivel joint.

6. When the inspection is complete, allow the customer tolowertheplatformbyfirstdisengagingthesafetylockout device and guiding the platform to the lowered position. Be sure to install and tighten the cab bolts before operating the machine.

TILTING THE OPERATOR'S STATION

TB180FRTB153FR

– 88 –TB250TB138FRTB235TB108 TB016 TB228

• Operator's compartment is spacious and provides unequalled comfort and visibility.

• Improved operator protection:

TB138FR ROPS: Roll Over Protective Structure TOPS: Tip Over Protective Structure FOPS Level 1: Falling Object Protective Structure

TB153FR TOPS: Tip Over Protective Structure FOPS Level 1: Falling Object Protective Structure

TB180FR FOPS Level 2: Falling Object Protective Structure

• ISO / SAE pattern change valve located in the access panel between the floorboard and seat allows operator to choose their preferred operational pattern.

• Large floor area with flip down travel pedals, foot operated boom swing and comfortable foot rest.

• High back suspension seat features adjustments for height, weight, and position.

• Arm rests are positioned to provide comfortable operation.

• Progressive pilot controls are low effort and smooth and allow the operator to have precise control for safe operation.

• Proportional slide switches and push button controls for auxiliary hydraulics allow the operator to choose their preferred method for controlling attachments.

• One touch decelerator is standard equipment and helps reduce fuel consumption and improve communication on the jobsite.

• Lift overload alarm (TB153FR and TB180FR) may be turned on to alert the operator that the load exceeds the machine's hydraulic lifting capacity.

• Engine monitoring system provides warning lights, gauges, and audible alarms to keep the operator informed.

• Two-speed button positioned on the right travel lever.

• Enclosed cab with air conditioner, heater, AM / FM / MP3 radio, retractable front window, cup holder, and storage.

OPERATOR'S STATION

TB138FR

– 89 –TB153FR TB180FR TB285 TB1140

NotEsTB138FR, TB153FR, TB180FR Zero Swing Hydraulic Excavators

TB180FRTB153FR

– 90 –TB250TB138FRTB235TB108 TB016 TB228

OPERATING PERFORMANCEOperating Weight with Bucket and Rubber TracksMaximum Digging DepthMaximum Dump HeightMaximum ReachMaximum Bucket Digging ForceMaximum Arm Digging ForceArm LengthSlew SpeedTraction Force

ENGINEMake / ModelTier RatingCylinders / DisplacementHorsepower Gross (SAE J1995)Horsepower Net (SAE 1349)Rated Engine SpeedMaximum TorqueEngine LubricationCooling SystemFuel Tank CapacityFuel Consumption (65% of Full Load)Electrical System

UNDERCARRIAGETraction Drive TypeParking BrakeTrack Roller TypeTrack RollersTrack WidthTrack Ground Contact LengthGround PressureMaximum Travel Speed:Low RangeHigh Range

HYDRAULIC SYSTEMPump Type

Total Hydraulic FlowAuxiliary Hydraulic FlowSystem Operating Pressure (adjustable)Hydraulic Reservoir CapacityHydraulic System Capacity

Canopy 8,355 lb (3,790 kg)Cab 8,535 lb (3,870 kg)10 ft 11 in (3,325 mm)12 ft 8 in (3,860 mm)18 ft 0 in (5,485 mm)8,955 lb (4,062 kg)4,125 lb (1,871 kg)5 ft 3 in (1,600 mm)9.8 rpm8,871 lb (4,024 kg)

Yanmar / 3TNV88Interim Tier 43 / 100 cu in (1.6 L)29.8 hp (22.2 Kw)28.8 hp (21.5 Kw)2,400 rpm79 ft-lb @ 1,440 rpm (107.1 Nm)5.0 qt (4.7 L)6.3 qt (5.9 L)10.6 gal (40 L)1.4 gal / hr (5.2 L / hr)12 volts / 40 amps

Planetary Reduction and Auto Shift DownSpring Applied, Hydraulically Released Permanently Sealed, Triple Flanged 4 per side13.8 in (350 mm)5 ft 5 in (1,655 mm)Canopy 4.35 psi Cab 4.42 psi

1.9 mph (3.0 km / hr)3.3 mph (5.3 km / hr)

Twin Variable Displacement Piston Pumps with Two Gear Pumps

28.3 gal / min (107 L / min)15.6 gal / min (59.1 L / min)3,000 psi (20.6 mpa)11 gal (41.3 L)18 gal (68.1 L)

WORKING DIMENSIONSA. Maximum ReachB. Maximum Reach Ground LevelC. Maximum Dig DepthD. Maximum Vertical Dig DepthE. Maximum Dig HeightF. Maximum Dump HeightG. Blade Maximum LiftH. Blade Maximum Lower

18 ft 0 in (5,485 mm)17 ft 7 in (5,360 mm)10 ft 11 in (3,325 mm)6 ft 9 in (2,050 mm)16 ft 11 in (5,155 mm)12 ft 8 in (3,860 mm)1 ft 2 in (355 mm)11.4 in (290 mm)

SPECIFICATIONS

TB138FR

– 91 –TB153FR TB180FR TB285 TB1140

spEcIfIcatIoNs & fEaturEsTB138FR Zero Swing Hydraulic Excavator

18 ft 0 in (5,485 mm)17 ft 7 in (5,360 mm)10 ft 11 in (3,325 mm)6 ft 9 in (2,050 mm)16 ft 11 in (5,155 mm)12 ft 8 in (3,860 mm)1 ft 2 in (355 mm)11.4 in (290 mm)

MACHINE DIMENSIONSA. Transport LengthB. WidthC. Transport HeightD. Tail Swing (Slew) RadiusE. Counterweight Ground ClearanceF. Track Ground Contact LengthG. Undercarriage LengthH. Track Width (Rubber)J. Ground ClearanceK. Minimum Front RadiusL. Offset Working Distance (Left)M. Offset Working Distance (Right)P. Dozer Blade WidthQ. Dozer Blade Height

15 ft 8 in (4,770 mm)5 ft 8.5 in (1,740 mm)8 ft 5 in (2,565 mm)3 ft 2 in (955 mm)1 ft 11.8 in (605 mm)5 ft 5 in (1,655 mm)6 ft 11 in (2,110 mm)13.8 in (350 mm)11.6 in (295 mm)4 ft 9 in (1,460 mm)2 ft 3.6 in (700 mm) @ 30°2 ft 4.7 in (730 mm) @ 15°5 ft 8.5 in (1,740 mm)1 ft 3.6 in (396 mm)

PRODUCT FEATURES

ENGINE– EPA Interim Tier 4 Compliant

– Automatic Fuel Bleed System

– Extended Life Coolant

– Dual Element Air Cleaner

ELECTRICAL– Electronic Monitoring System that Includes

Visual and Audible Alarms for Low Oil Pressure, High Engine Coolant Temperature, Air Cleaner Restriction, and Charge Level

– 12 volt System with 40 amp Alternator

– Work Lights: Boom, Side Cover

– Engine Preheat

– Hour Meter

– Travel Alarm

UNDERCARRIAGE AND FRAME– Triple Flange Track Rollers

– Sloped Frame with Open Centers

– 2-Speed Travel with Automatic Shift

– Heavy Duty Dozer Blade

– Cast Iron Wrap Around Protective Counterweight

– 13.8" Rubber Tracks

HYDRAULIC– Cushioned Boom and Arm Cylinders

– Pilot Controls

– Primary Auxiliary Hydraulic Circuit Plumbed to Arm with 1-Way and 2-Way Operation

– Accumulator

– Hydraulic Oil Cooler with Sight Gauge

WORKING EQUIPMENT– Main Boom Cylinder Guard

– Patented Side-to-Side (STS) Offset Boom System

– Long Arm

– Dual Pin Position Bucket (optional)

– Mechanical Bucket Quick Coupler (optional)

– Main Pin Hydraulic Thumb (optional)

OPERATOR'S STATION– ROPS / TOPS / FOPS Four Post Canopy

– Tilt-up Operator Station

– Six Way Adjustable Suspension Seat with Adjustable Arm Rests

– Quick Change Control Pattern ( ISO or SAE)

– Proportional Slide Switch for Auxiliary Hydraulics

– 2" Retractable Seat Belt

– 3" Seat Belt (optional)

– Cab with Air Conditioner, Heat, Defrost, Windshield Wiper and Washer, AM / FM / MP3 Radio (optional)

AB

C

D

E

F

GH

J

K

L

MP

Q

– 92 –TB250TB138FRTB235TB108 TB016 TB228

Takeuchi TB138FR

Bobcat E35 M

Case CX36B

Caterpillar 303.5E CR

John Deere 35D

Komatsu PC35MR-3

Kubota U35

Volvo ECR 38

Yanmar Vi035-5

PerformanceTail Swing Design Full Rotation Minimal Zero Tail Zero Tail Zero Tail Zero Tail Zero Tail Zero Tail Zero Tail

Operating Weight 8,355 lb 7,434 lb 7,958 lb 7,734 lb 7,760 lb 7,909 lb 8,025 lb 7,355 lb 7,850 lb

Maximum Digging Depth 10' 11'' 10' 2'' 10' 1'' 10' 4'' 10' 0" 11' 4'' 10' 4'' 8' 11'' 10' 10''

Maximum Dump Height 12' 8'' 11' 3'' 11' 8'' 11' 11'' 11' 5'' 12' 5'' 11' 7'' 10' 5'' 11' 8''

Maximum Reach (Ground Level) 17' 7'' 17' 2'' 16' 8'' 17' 6'' 17' 2'' 18' 1'' 16' 11'' 15' 9'' 17' 1''

Maximum Bucket Digging Force 8,955 lb 7,081 lb 8,430 lb 7,419 lb 6,182 lb 6,725 lb 8,397 lb 6,463 lb 7,220 lb

Maximum Arm Digging Force 4,125 lb 4,721 lb 4,203 lb 3,799 lb 4,294 lb 3,682 lb 4,222 lb 4,305 lb 4,410 lb

Traction Force 8,871 lb 7,201 lb 8,655 lb 6,969 lb NP 7,500 lb 6,098 lb 6,857 lb 7,894 lb

EngineMake / Model Yanmar / 3TNV88 Kubota / D1803 Yanmar / 3TNV88 Cat / C1.8 Yanmar / 3TNV88 Komatsu / 3D88E Kubota / D1703-M Volvo / D1.6 Yanmar / 3TNV88

Tier Rating EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i EPA Tier 4i

Horsepower Net (SAE 1349) 28.8 hp 33.3 hp 28.4 hp 31.6 hp 28.6 hp 29.0 hp 28.3 hp 27.0 hp 28.0 hp

Rated Engine Speed 2,400 rpm 2,400 rpm 2,400 rpm NP 2,400 rpm 2,400 rpm 2,250 rpm 2,200 rpm 2,300 rpm

Maximum Torque 79.0 ft-lb 83.8 ft-lb 72.6 lb-ft NP NP NP NP 76.0 ft-lb NP

UndercarriageTrack Width 13.8'' 12.6'' 11.8'' 12.0'' 12.0'' 11.8'' 11.8'' 11.8'' 12.0''

Ground Pressure 4.3 psi 4.3 psi 4.6 psi 4.7 psi 4.6 psi 5.1 psi 4.7 psi 4.4 psi 4.4 psi

Travel Speed Low Range 1.9 mph 1.6 mph 1.6 mph 1.6 mph 1.7 mph 1.7 mph 1.9 mph 1.7 mph 1.7 mph

Travel Speed High Range 3.3 mph 2.9 mph 2.8 mph 2.8 mph 2.8 mph 3.0 mph 2.9 mph 2.4 mph 2.9 mph

Hydraulic SystemTotal Hydraulic Flow 28.3 gpm 29.1 gpm 23.4 gpm 23.1 gpm 28.1 gpm 24.2 gpm 26.1 gpm 29.8 gpm 30.6 gpm

Auxiliary Hydraulic Flow 15.6 gpm 16.9 gpm 15.5 gpm 15.9 gpm 17.5 gpm 18.5 gpm 10.3 gpm 15.9 gpm 17.4 gpm

Hydraulic System Pressure 3,000 psi 2,987 psi 3,336 psi 3,553 psi NP 3,770 psi NP 3,483 psi 3,200 psi

Hydraulic Reservoir Capacity 11.0 gal 6.0 gal 10.0 gal 11.2 gal 8.5 gal 3.7 gal 9.5 gal 4.8 gal 11.1 gal

DimensionsWidth 5' 8.5'' 5' 9'' 5' 7'' 5' 10'' 5' 9'' 5' 9'' 5' 7'' 5' 5'' 5' 1''

Height 8' 5'' 7' 11'' 8' 5'' 8' 2'' 8' 1'' 8' 3'' 8' 0" 7' 10'' 8' 3''

Length (Transport) 15' 8'' 15' 9'' 15' 5'' 15' 9'' 15' 3'' 16' 1'' 15' 5'' 14' 6'' 15' 2''

Ground Clearance 11.6'' NP 12.9'' NP 11.0'' NP 11.4'' 11.4'' 13.0''

Dozer Blade Height 15.6'' 14.0'' 13.0'' 12.8'' 14.6'' 14.0'' NP 14.6'' 15.0''

Boom Swing Angle (Degrees L / R) 30 / 15 77 / 55 70 / 60 55 / 50 72 / 62 75 / 50 70 / 50 70 / 50 45 / 70

Min Front Swing Radius 4' 9'' 7' 5'' NP 7' 2'' 6' 9'' 5' 7'' 5' 3'' 6' 2'' 6' 0"

Tail Swing Radius 3' 2'' 2' 9'' 2' 9'' 2' 11'' 2' 10'' 3' 1'' 2' 9.5'' 2' 7.9'' 2' 7''

TB138FR

– 93 –TB153FR TB180FR TB285 TB1140

compEtItIvE dEtaIlsTB138FR Zero Swing Hydraulic Excavator

Takeuchi TB138FR

Bobcat E35 M

Case CX36B


John Deere 35D

Komatsu PC35MR-3

Kubota U35

Volvo ECR 38

Yanmar Vi035-5

PerformanceTail Swing Design Full Rotation Minimal Zero Tail Zero Tail Zero Tail Zero Tail Zero Tail Zero Tail Zero Tail


Maximum Digging Depth 10' 11'' 10' 2'' 10' 1'' 10' 4'' 10' 0" 11' 4'' 10' 4'' 8' 11'' 10' 10''

Maximum Dump Height 12' 8'' 11' 3'' 11' 8'' 11' 11'' 11' 5'' 12' 5'' 11' 7'' 10' 5'' 11' 8''

Maximum Reach (Ground Level) 17' 7'' 17' 2'' 16' 8'' 17' 6'' 17' 2'' 18' 1'' 16' 11'' 15' 9'' 17' 1''




EngineMake / Model Yanmar / 3TNV88 Kubota / D1803 Yanmar / 3TNV88 Cat / C1.8 Yanmar / 3TNV88 Komatsu / 3D88E Kubota / D1703-M Volvo / D1.6 Yanmar / 3TNV88




Maximum Torque 79.0 ft-lb 83.8 ft-lb 72.6 lb-ft NP NP NP NP 76.0 ft-lb NP

UndercarriageTrack Width 13.8'' 12.6'' 11.8'' 12.0'' 12.0'' 11.8'' 11.8'' 11.8'' 12.0''






Hydraulic System Pressure 3,000 psi 2,987 psi 3,336 psi 3,553 psi NP 3,770 psi NP 3,483 psi 3,200 psi

Hydraulic Reservoir Capacity 11.0 gal 6.0 gal 10.0 gal 11.2 gal 8.5 gal 3.7 gal 9.5 gal 4.8 gal 11.1 gal

DimensionsWidth 5' 8.5'' 5' 9'' 5' 7'' 5' 10'' 5' 9'' 5' 9'' 5' 7'' 5' 5'' 5' 1''

Height 8' 5'' 7' 11'' 8' 5'' 8' 2'' 8' 1'' 8' 3'' 8' 0" 7' 10'' 8' 3''

Length (Transport) 15' 8'' 15' 9'' 15' 5'' 15' 9'' 15' 3'' 16' 1'' 15' 5'' 14' 6'' 15' 2''

Ground Clearance 11.6'' NP 12.9'' NP 11.0'' NP 11.4'' 11.4'' 13.0''

Dozer Blade Height 15.6'' 14.0'' 13.0'' 12.8'' 14.6'' 14.0'' NP 14.6'' 15.0''


Min Front Swing Radius 4' 9'' 7' 5'' NP 7' 2'' 6' 9'' 5' 7'' 5' 3'' 6' 2'' 6' 0"

Tail Swing Radius 3' 2'' 2' 9'' 2' 9'' 2' 11'' 2' 10'' 3' 1'' 2' 9.5'' 2' 7.9'' 2' 7''

– 94 –TB250TB138FRTB235TB108 TB016 TB228



UNDERCARRIAGETraction Drive TypeParking BrakeTrack Roller TypeTrack RollersTrack WidthTrack Ground Contact LengthGround PressureMaximum Travel Speed:Low RangeHigh Range


Total Hydraulic FlowAuxiliary Hydraulic FlowSystem Operating Pressure (adjustable)Hydraulic Reservoir CapacityHydraulic System Capacity

Canopy 12,450 lb (5,647 kg)Cab 12,681 lb (5,752 kg)12 ft 10 in (3,900 mm)12 ft 9 in (3,885 mm)20 ft 4 in (6,195 mm)11,093 lb (5,032 kg)5,670 lb (2,572 kg)5 ft 9 in (1,760 mm)10 rpm12,613 lb (5,721 kg)


Planetary Reduction and Auto Shift DownSpring Applied, Hydraulically ReleasedPermanently Sealed, Triple Flanged 5 per side15.7 in (400 mm)6 ft 6 in (1,985 mm)Canopy 4.6 psi Cab 4.7 psi

1.7 mph (2.7 km / hr)3.1 mph (5.0 km / hr)

Twin Variable Displacement Piston Pumps with Two Gear Pumps42.8 gal / min (62 L / min)25.6 gal / min (96.9 L / min)3,000 psi (20.6 mpa)18 gal (68.1 L)21.9 gal (110 L)


20 ft 4 in (6,195 mm)19 ft 10 in (6.065 mm)12 ft 10 in (3,900 mm)9 ft 11 in (3,030 mm)18 ft 0 in (5,490 mm)12 ft 9 in (3,885 mm)12.6 in (320 mm)12.8 in (325 mm)

SPECIFICATIONS

– 95 –TB153FR TB180FR TB285 TB1140


20 ft 4 in (6,195 mm)19 ft 10 in (6.065 mm)12 ft 10 in (3,900 mm)9 ft 11 in (3,030 mm)18 ft 0 in (5,490 mm)12 ft 9 in (3,885 mm)12.6 in (320 mm)12.8 in (325 mm)

MACHINE DIMENSIONSA. Transport LengthB. WidthC. Transport HeightD. Tail Swing (Slew) RadiusE. Counterweight Ground ClearanceF. Track Ground Contact LengthG. Undercarriage LengthH. Track Width (Rubber)J. Ground ClearanceK. Minimum Front RadiusL. Offset Working Distance (Left)M. Offset Working Distance (Right)P. Dozer Blade WidthQ. Dozer Blade Height

17 ft 7 in (5,350 mm)6 ft 7 in (2,000 mm)8 ft 6 in (2,585 mm)3 ft 8 in (1,110 mm)2 ft 0 in (615 mm)6 ft 6 in (1,985 mm)8 ft 2.5 in (2,500 mm)15.7 in (400 mm)11.8 in (300 mm)4 ft 3 in (1,285 mm)2 ft 4.3 in (720 mm) @ 30°2 ft 8.5 in (825 mm) @ 15°6 ft 7 in (2,000 mm)16.9 in (430 mm)

PRODUCT FEATURES









– Engine Preheat

– Hour Meter

– Travel Alarm






– 15.7" Rubber Tracks

HYDRAULIC– Cushioned Boom and Arm Cylinders

– Pilot Controls


– Accumulator


– High Flow Primary Auxiliary Hydraulics 25.6 gal / min



– Long Arm

– Boom Holding Valve with Overload Alarm




OPERATOR'S STATION– ROPS / TOPS / FOPS Four Post Canopy







– Cab with Air Conditioner, Heat, Defrost, Windshield Wiper and Washer, AM / FM / MP3 Radio (optional)

TB153FR

AB

D

C

E

FGH

J

K

L

MP

Q

– 96 –TB250TB138FRTB235TB108 TB016 TB228

Takeuchi TB153FR

Bobcat E50 M

Case CX55B


John Deere 50D

Komatsu PC55MR-3

Kubota U45S

Kubota U55

Yanmar Vi055

PerformanceTail Swing Design Full Rotation Minimal Minimal Minimal Zero Tail Minimal Zero Tail Minimal Zero Tail


Maximum Digging Depth 12' 10" 11' 6" 12' 10" 12' 8" 11' 8" 12' 6" 11' 10" 11' 10.3" 13' 1"

Maximum Dump Height 12' 9" 12' 10" 13' 10" 13' 4" 13' 5" 13' 11" 13.0' 13' 2.3" 14' 5"

Maximum Reach (Ground Level) 19' 10" 19' 5" 19' 11" 19' 9" 19' 6" 19' 11" 19' 3" 19' 6.1" 20' 4"




EngineMake / Model Yanmar / 4TNV88 Kubota / V2403 Yanmar / 4TNV88 Mitsubishi / S4Q2-T Yanmar / 4TNV88 Komatsu / 4D88E-6 Kubota / V2203-M Kubota / V2607-DI Yanmar / 4TNV88




Maximum Torque 105.0 ft-lb 132.4 ft-lb 102.7 ft-lb NP NP NP NP NP NP

UndercarriageTrack Width 15.7" 15.7" 15.7" 16.0" 16.0" 16.0" 15.7" 15.7" 16.0"






Hydraulic System Pressure 3,000 psi NP 3,336 psi 3,553 psi NP 3,840 psi NP NP 3,553 psi

Hydraulic Reservoir Capacity 18.0 gal 4.0 gal 9.0 gal 18.0 gal 13.2 gal 5.3 gal 12.0 gal 11.9 gal NP

DimensionsWidth 6' 7" 6' 5" 6' 5" 6' 6" 6' 7" 6' 5" 6' 5" 6' 5.2" 6' 6"

Height 8' 6" 8' 3" 8' 4" 8' 4" 8' 3" 8' 4" 8' 4" 8' 4.4" 8' 7"

Length (Transport) 17' 7" 18' 3" 17' 10" 17' 10" 17' 11" 18' 3" 17' 8" 18' 0.5" 18' 3"

Ground Clearance 11.8" NP 14.0" NP 13.4" NP 12.6" 12.2" 14.0"

Dozer Blade Height 16.9" 17.0" 14.0" 16.0" 17.0" 14.0" 15.4" 16.0" 16.0"


Min Front Swing Radius 4' 3" 6' 7" NP 8' 3" NP 5' 9" 6' 3" 6' 9.9" 7' 7"

Tail Swing Radius 3' 8" 3' 3" 4' 2" 3' 8" 3' 3" 3' 6" 3' 3" 3' 5.1" 3' 3.2"

– 97 –TB153FR TB180FR TB285 TB1140

Takeuchi TB153FR

Bobcat E50 M

Case CX55B


John Deere 50D

Komatsu PC55MR-3

Kubota U45S

Kubota U55

Yanmar Vi055

PerformanceTail Swing Design Full Rotation Minimal Minimal Minimal Zero Tail Minimal Zero Tail Minimal Zero Tail


Maximum Digging Depth 12' 10" 11' 6" 12' 10" 12' 8" 11' 8" 12' 6" 11' 10" 11' 10.3" 13' 1"

Maximum Dump Height 12' 9" 12' 10" 13' 10" 13' 4" 13' 5" 13' 11" 13.0' 13' 2.3" 14' 5"

Maximum Reach (Ground Level) 19' 10" 19' 5" 19' 11" 19' 9" 19' 6" 19' 11" 19' 3" 19' 6.1" 20' 4"




EngineMake / Model Yanmar / 4TNV88 Kubota / V2403 Yanmar / 4TNV88 Mitsubishi / S4Q2-T Yanmar / 4TNV88 Komatsu / 4D88E-6 Kubota / V2203-M Kubota / V2607-DI Yanmar / 4TNV88




Maximum Torque 105.0 ft-lb 132.4 ft-lb 102.7 ft-lb NP NP NP NP NP NP







Hydraulic System Pressure 3,000 psi NP 3,336 psi 3,553 psi NP 3,840 psi NP NP 3,553 psi


DimensionsWidth 6' 7" 6' 5" 6' 5" 6' 6" 6' 7" 6' 5" 6' 5" 6' 5.2" 6' 6"

Height 8' 6" 8' 3" 8' 4" 8' 4" 8' 3" 8' 4" 8' 4" 8' 4.4" 8' 7"

Length (Transport) 17' 7" 18' 3" 17' 10" 17' 10" 17' 11" 18' 3" 17' 8" 18' 0.5" 18' 3"


Dozer Blade Height 16.9" 17.0" 14.0" 16.0" 17.0" 14.0" 15.4" 16.0" 16.0"


Min Front Swing Radius 4' 3" 6' 7" NP 8' 3" NP 5' 9" 6' 3" 6' 9.9" 7' 7"

Tail Swing Radius 3' 8" 3' 3" 4' 2" 3' 8" 3' 3" 3' 6" 3' 3" 3' 5.1" 3' 3.2"


TB153FR

– 98 –TB250TB138FRTB235TB108 TB016 TB228



UNDERCARRIAGETraction Drive TypeParking BrakeTrack Roller TypeTrack RollersTrack WidthTrack Ground Contact LengthGround PressureMaximum Travel Speed: Low Range High Range


Total Hydraulic FlowPrimary Auxiliary FlowSecondary Auxiliary Hydraulic FlowSystem Operating PressureHydraulic Reservoir CapacityHydraulic System Capacity

Canopy 18,370 lb (8,332 kg)Cab 18,821 lb (8,537 kg)14 ft 11 in (4,545 mm)14 ft 8 in (4,470 mm)23 ft 7 in (7,195 mm)16,335 lb (7,409 kg)8,020 lb (3,638 kg)6 ft 7 in (2,000 mm)9.9 rpm18,720 lb (8,491 kg)


Planetary Reduction and Auto Shift DownSpring Applied, Hydraulically ReleasedPermanently Sealed, Triple Flanged 5 per side17.7 in (450 mm)7 ft 3 in (2,210 mm)Rubber 5.5 psi Steel 5.6 psi

1.7 mph (2.7 km / hr)3.4 mph (5.6 km / hr)

Twin Variable Displacement Piston Pumps with Two Gear Pumps

52.5 gal / min (198 L / min)36.6 gal / min (138.4 L / min)15 gal (58 L)4,000 psi (27.5 mpa)18 gal (68.1 L)31.7 gal (120 L)


23 ft 7 in (7,195 mm)23 ft 1 in (7,045 mm)14 ft 11 in (4,545 mm)11 ft 5 in (3,490 mm)21 ft 2 in (6,465 mm)14 ft 8 in (4,480 mm)1 ft 7.9 in (505 mm)1 ft 3.9 in (405 mm)

SPECIFICATIONS

– 99 –TB153FR TB180FR TB285 TB1140


23 ft 7 in (7,195 mm)23 ft 1 in (7,045 mm)14 ft 11 in (4,545 mm)11 ft 5 in (3,490 mm)21 ft 2 in (6,465 mm)14 ft 8 in (4,480 mm)1 ft 7.9 in (505 mm)1 ft 3.9 in (405 mm)

MACHINE DIMENSIONSA. Transport LengthB. WidthC. Transport HeightD. Tail Swing (Slew) RadiusE. Counterweight Ground ClearanceF. Track Ground Contact LengthG. Undercarriage LengthH. Track WidthJ. Ground ClearanceK. Minimum Front RadiusL. Offset Working Distance (Left)M. Offset Working Distance (Right)P. Dozer Blade WidthQ. Dozer Blade Height

20 ft 3 in (6,175 mm)7 ft 7 in (2,300 mm)9 ft 1 in (2,770 mm)4 ft 1 in (1,255 mm)2 ft 4 in (715 mm)7 ft 3 in (2,210 mm)9 ft 4 in (2,855 mm)17.7 in (450 mm)1 ft 1.7 in (350 mm)4 ft 7 in (1,395 mm)2 ft 7.5 in (800 mm) @ 30°3 ft 1.2 in (945 mm) @ 15°7 ft 7 in (2,300 mm)1 ft 7.6 in (500 mm)

PRODUCT FEATURES









– Engine Preheat

– Hour Meter

– Travel Alarm






– 17.7" Rubber or Steel Tracks

HYDRAULIC– Cushioned Main Boom and Arm Cylinders

– Pilot Controls


– High Flow Primary Auxiliary Hydraulics 36.6 gal / min

– Second Auxiliary Hydraulics Plumbed to Arm

– Accumulator




– Long Arm

– Boom Holding Valve with Overload Alarm




OPERATOR'S STATION– Enclosed Cab with Air Conditioner, Heat,

Defrost, Wiper, Work Lights Cab and Boom, AM / FM Radio with MP3 Jack, Retractable Front Glass with Cylinder Assisted Lift and Removeable Lower Section







TB180FR

AB

D

C

E

F

GH

J

K

L

MP

Q

– 100 –TB250TB138FRTB235TB108 TB016 TB228

Takeuchi TB180FR

Bobcat E80 M

CaseCX75

Caterpillar308E CR SB

John Deere 85D

Komatsu PC88MR-8

Kubota KX080-3

VoloECR88

Yanmar Vi0 80

PerformanceTail Swing Design Full Rotation Minimal Zero Tail Minimal Zero Tail Minimal Zero Tail Zero Tail Zero Tail


Maximum Digging Depth 14' 11" 15' 4" 14' 11" 13' 8" 14' 8" 15' 2" 15' 1.1" 14' 11" 14' 4"

Maximum Dump Height 14' 8" 16' 8" 18' 2" NP 16' 10" 15' 6" 17' 2.7" 16' 10" 15' 3"

Maximum Reach (Ground Level) 23' 1" 23' 11" 22' 3" 22' 11" 24' 9" 23' 5" 23' 6.3" 23' 9" 23' 5"


Maximum Arm Digging Force 8,020 lb 7,666 lb 7,644 lb 9,015 lb 7,209 lb 8,160 lb 8,554 lb NP 8,363 lb

Traction Force 18,720 lb NP 13,376 lb 14,500 lb 14,661 lb 15,050 lb 14,615 lb 12,589 lb NP

EngineMake / Model Yanmar / 4TNV98 Yanmar / 4TNV98 Isuzu / AU-4LE2X Mitsubishi / 4M40TL Isuzu / 4LE2X Komatsu / 4D95LE Kubota / V3307DIT Volvo / D3.4 Yanmar / 4TNV98




Maximum Torque 179.0 ft-lb 182.9 ft-lb 155.0 ft-lb NP NP NP NP 173.0 lb-ft NP


Ground Pressure 5.5 psi 5.6 psi 5.0 psi NP 4.9 psi 5.4 psi 5.2 psi 5.5 psi 5.0 psi



Hydraulic SystemTotal Hydraulic Flow 52.5 gpm 43.8 gpm 41.7 gpm NP 58.1 gpm 60.8 gpm 55.6 gpm 43.8 gpm 56.7 gpm

Primary Auxiliary Hydraulic Flow 36.6 gpm 31.7 gpm NP 33.8 gpm NP NP 26.4 gpm 23.8 gpm 31.7 gpm

Secondary Auxiliary Hydraulic Flow 15.0 gpm NP NP 16.9 gpm NP NP 17.6 gpm NP NP


DimensionsWidth 7' 7" 7' 6" 7' 7" NP 8' 1" 7' 8" 7' 2.6" 7' 6" 7' 5"

Height 9' 1" 8' 7" 9' 5" NP 8' 4" 8' 11" 8' 4" 8' 9" 8' 10"

Length (Transport) 20' 3" 20' 2" 19' 5" 20' 0" 22' 4" 20' 10" 21' 1.9" 21' 0" 21' 2"


Dozer Blade Height 19.6" 17.0" 18.0" NP 18.0" NP 19.7" 18.5" 18.0"

Boom Swing Angle (Degrees L / R) 30 / 15 70 / 55 NP NP 60 / 60 53 / 67 70 / 60 70 / 60 57 / 60

Min Front Swing Radius 4' 7" 8' 2" 6' 10" NP NP 8' 4" 6' 6.7" 6' 8" 7' 9"

Tail Swing Radius 4' 1" 4' 3" 4' 0" NP 4' 11" 4' 5" 4' 9.5" 4' 2" 3' 8"

– 101 –TB153FR TB180FR TB285 TB1140

Takeuchi TB180FR

Bobcat E80 M

CaseCX75

Caterpillar308E CR SB

John Deere 85D

Komatsu PC88MR-8

Kubota KX080-3

VoloECR88

Yanmar Vi0 80

PerformanceTail Swing Design Full Rotation Minimal Zero Tail Minimal Zero Tail Minimal Zero Tail Zero Tail Zero Tail


Maximum Digging Depth 14' 11" 15' 4" 14' 11" 13' 8" 14' 8" 15' 2" 15' 1.1" 14' 11" 14' 4"

Maximum Dump Height 14' 8" 16' 8" 18' 2" NP 16' 10" 15' 6" 17' 2.7" 16' 10" 15' 3"

Maximum Reach (Ground Level) 23' 1" 23' 11" 22' 3" 22' 11" 24' 9" 23' 5" 23' 6.3" 23' 9" 23' 5"


Maximum Arm Digging Force 8,020 lb 7,666 lb 7,644 lb 9,015 lb 7,209 lb 8,160 lb 8,554 lb NP 8,363 lb

Traction Force 18,720 lb NP 13,376 lb 14,500 lb 14,661 lb 15,050 lb 14,615 lb 12,589 lb NP

EngineMake / Model Yanmar / 4TNV98 Yanmar / 4TNV98 Isuzu / AU-4LE2X Mitsubishi / 4M40TL Isuzu / 4LE2X Komatsu / 4D95LE Kubota / V3307DIT Volvo / D3.4 Yanmar / 4TNV98




Maximum Torque 179.0 ft-lb 182.9 ft-lb 155.0 ft-lb NP NP NP NP 173.0 lb-ft NP


Ground Pressure 5.5 psi 5.6 psi 5.0 psi NP 4.9 psi 5.4 psi 5.2 psi 5.5 psi 5.0 psi



Hydraulic SystemTotal Hydraulic Flow 52.5 gpm 43.8 gpm 41.7 gpm NP 58.1 gpm 60.8 gpm 55.6 gpm 43.8 gpm 56.7 gpm

Primary Auxiliary Hydraulic Flow 36.6 gpm 31.7 gpm NP 33.8 gpm NP NP 26.4 gpm 23.8 gpm 31.7 gpm

Secondary Auxiliary Hydraulic Flow 15.0 gpm NP NP 16.9 gpm NP NP 17.6 gpm NP NP


DimensionsWidth 7' 7" 7' 6" 7' 7" NP 8' 1" 7' 8" 7' 2.6" 7' 6" 7' 5"

Height 9' 1" 8' 7" 9' 5" NP 8' 4" 8' 11" 8' 4" 8' 9" 8' 10"

Length (Transport) 20' 3" 20' 2" 19' 5" 20' 0" 22' 4" 20' 10" 21' 1.9" 21' 0" 21' 2"


Dozer Blade Height 19.6" 17.0" 18.0" NP 18.0" NP 19.7" 18.5" 18.0"

Boom Swing Angle (Degrees L / R) 30 / 15 70 / 55 NP NP 60 / 60 53 / 67 70 / 60 70 / 60 57 / 60

Min Front Swing Radius 4' 7" 8' 2" 6' 10" NP NP 8' 4" 6' 6.7" 6' 8" 7' 9"

Tail Swing Radius 4' 1" 4' 3" 4' 0" NP 4' 11" 4' 5" 4' 9.5" 4' 2" 3' 8"


TB180FR

– 154 –

®

Those in the know, know Takeuchi

519 Bonnie Valentine Way Pendergrass, Georgia 30567www.takeuchi-us.com

7% )5 7% )5 7% )5...engine and routine inspection points. ( note: release cable is located behind...

Documents