6th sem group diploma front pkiet bargarh
TRANSCRIPT
A PROJECT REPORT
ON
“BELT DRIVE USEIN CIRRCULATIOR PUMP”
Seminar report submitted in partial fulfilment The Requirement for awarding diploma in Mechanical Engineering By S.C.T.E. & VT ORISSA
Presented By
Vikash sarangiRegd no-f1100804070
6TH SEM,3RDYEARUnder the guidance of
ER. B.B SATHPATHY H.O.D IN MECHANICAL ENGINEERINGER.SUNIL KUMAR MAHAKUD LECT.IN MECHANICAL
ENGINEERING session 2014
CERTIFICATE This is to certify that the
Project ENTITLED “BELT DRIVE USEIN CIRRCULATIOR PUMP” PRESENTED BY the
Vikash sarangiRegd no-f1100804070 in Mechanical Engineering
UNDER S.C.T.E. & V.T., Orissa, embodies the work carried out independently by his, under our
supervision and guidance.
We recommended this is the seminar Report for diploma examination in Engineering in 2014 under S.C.T.E. & V.T., Orissa.
ER. B.B SATHPATHY H.O.D IN MECHANICAL ENGG.
P.K.A.I.E.T., BARGARH
ER.SUNIL KU MAHAKUD lECT. IN MECHANICAL ENGG.
P.K.A.I.E.T., BARGARH
MR.TARUN KUMAR SARANGI
SECRETARY OF P.K.A.I.E.T,BARGARH
ACKNOWLEDGEMENT
I give my immense pleasure in expressing my sincere heartfelt gratitude ER. B.B SATHPATHY H.O.D IN MECHANICAL ENGINEERING ER. SUNIL KUMAR MAHAKUD IN MECHANICAL ENGINEERING I thank full for their needy help & proper guidance. I greatly in debited to them for their constructive suggestion time to time.
Vikash sarangiRegd no-f1100804070
6THSem. 3RDYear
P.K.A.I.E.T BARGARH
Under the guidance of
ALL STAFFS OF MECHANICAL DEPARTMENT
ER.B.B.SATAPATHY ER.D.K.SARAPER.M.HERNA ER.S.K.BARIK
ER.S.K.MAHAKUD ER.S.BHOI ER.S.PANDA ER.M.P.SAHU ER.S.P.RATH ER.K.P.SAHU ER.S.S.BHOI ER.R.R.DAS
ER.V.BARGAH ER.R.MAHARANA ER.Y.S.BARIK ER.A.RATH
ER.D.K.MEHER ER.N.PADHAN ER.G.SAHU
ER. B.B SATHPATHY ER.SUNIL KU MAHAKUD
H.O.D IN MECHANICAL ENGG. lECT. IN MECHANICAL ENGG. P.K.A.I.E.T., BARGARH P.K.A.I.E.T., BARGARH
MR.TARUN KUMAR SARANGI
SECRETARY OF P.K.A.I.E.T,BARGARH
Suman kumar dash Regd no-f1100804061
Sunil kumar mahana Regd no-f1100804062
Suraj prasadRegd no-f1100804063 Swarup sampad dashRegd no-f1100804064
Tapan kumar singhRegd no-f1100804065Tapas kumar behera
Regd no-f1100804066Tukaram sathpathy
Regd no-f1100804067Udit kumar behera
Regd no-f1100804068 Uttam prabha ray regd
no-f1100804069 Vikash sarangi
Regd no-f1100804070Chaitanya Prasad apot Regd no-f1100804071
Bikash kumar bisiRegd no-f1100804072
ADVANTAGES :- 1. Electric furnace make heat readily available and
attain much higher temp.2. Electric furnace have greater efficiency .3. Temp and atmosphere can be easily controlled.4. The furnace has flexibility in operation .5. It is operated with cold as well as hot charges .6. Alloying additions may be charged in the furnace
vessel .
DISADVANTAGES:-1. The process is not so fast as basic oxygen furnace
process 2. It is uneconomical unless electric powder is available
at the cheaper rate and in plenty .3. Its cost is more then that of the open hearth furnace
process.4. Many furnace have smaller capacity.
APPLICATION :-Electric furnace are used for the production of all stainless steel ,carbon steels, heat resistance steels, alloy steels, tool steels and special alloy steels.
COLLEGE OF ENGINEERING AND TECHNOLOGY,
BHUBANESWAR
CONTENT
LATHING--------------------------- 01-10WELDING---------------------------11-18FITTING----------------------------18-29
SUBMITTED TO –HEAD OF MECHANICAL DEPARTMENT
SUBMITTED BY –SWARUP KUMAR PRUSTI
INFORMATION TECHONOLEGYREGD NO-107014369 FIRST SEM