64 push-to-close latch · 64-10-125-50 64-10-135-50 64-10-115-50 64-10-115-50 18.6 (.73) 19.4 (.77)...

244

Dimensions in millimeters (inch) unless otherwise stated

ACTUAL SIZE

www.southco.com/64

11(.42)

13 (.53)

43 (1.69)

28(1.10)

0.9(.036)

8 (.32)

1.6 (.065)MaximumDoor Thickness

3.2±.2(.125±.010)

Total grip

24.5

39 9.50±.8(.38±.03)

R 1.5 (.06)Maximum

+0.1-0.3

+0.1-0.3

(1.53±.01)

(.96±.01)9 (.36)

M4 slotted hex head screw/lockwasherassembly (supplied)

Part Number

64-01-10

Part NumberSee table

64 Push-to-Close LatchPull-to-open · Paddle latch · Miniature

• Single hole installation• Concealed mounting• Plastic slide

Material and FinishStainless steel, passivated and brushed finish and glass-filled reinforced nylon, black

Performance DetailsMaximum working load: 90 N (20 lbf)

Operating temperature range: -18ºC (0ºF) to 100ºC (210ºF)

Flammability rating: UL94-V0

Installation NotesMaximum tightening torque on mounting screws: 0.9 Nm (8 inlbf)

Other options available. For complete details on variety, part numbers, installation and specification, go to

245


ACTUAL SIZE

www.southco.com/64

56(2.20)

47(1.84)

42.5(1.67)

B

14(.56)

Cup

25(.97)

13 (.50)

Doorthicknessrange(see table)

Mounting nut

Stud, M4 Thread

BracketSlide (style 1 shown)

Griprange(see table)

1 (.04)

Cover

Paddle

47.5±0.2(1.88±.01)

A

16 (.63) Minimum

10.3±0.2 (.41±01)

36.5±0.2(1.44±.01)

Door

Frame

R 2 (.09) Maximum

Bracket

Stud

Mounting nut

Frame Door

Grip RangeSlide Style

AB

T (See

Notes)

Part Number Brushed Finish

Door Thickness Range

Minimum Maximum Min. Max. 3.7 (.144) Maximum

3.9 - 7.3 (.154 - .288)

11.1 - 14.6 (.437 - .576)

18.6 - 22 (.734 - .868)

1.2 (.05)

2 (.08)

110.4 (.41)

12.7 (.50)

12.4 (.49)

1.6 (.063)

64-10-111-50 ~ ~ ~

2.8 (.11)

3.6 (.14)

3

11.9 (.47)

14.2 (.56)

14.2 (.56)

3.2 (.125)

64-10-113-50 64-10-133-50 ~ ~

6 (.23)

6.7 (.27)

46.4

(.250)64-10-124-50 64-10-114-50 ~ ~

12.3 (.48)

13.1 (.52) 57.1

(.281)64-10-125-50 64-10-135-50 64-10-115-50 64-10-115-50

18.6 (.73) 19.4 (.77) 67.1

(.281)64-10-126-50 ~ 64-10-116-50 64-10-116-50

• Single hole installation• Concealed mounting• Plastic slide

Material and FinishStainless steel, passivated and brushed or black powder coated and glass-filled reinforced nylon, natural

Performance DetailsMaximum working load:

Style Max. Static Load N (lbf)

1 130 (30)

2 110 (25)

3 90 (20)

4 70 (15)

5 55 (12)

Operating temperature range: -18ºC (0ºF) to 100ºC (210ºF)

Flammability rating: UL94-V0

Installation NotesDoor thickness must not exceed T dimension (see table) in area through which slide will operate.It may be necessary to reduce thickness of door in area indicated by grid.

Slide styles:

NotesFor an assembly with black powder coated finish change last digit from 0 to 5 - Example: 64-10-111-55

64 Push-to-Close LatchPull-to-open · Paddle latch · Small

Style 3

Style 4

Style 5

Style 6

246


ACTUAL SIZE

www.southco.com/64

R 2 (.09)Maximum

47.5±0.2(1.88±.01)

A

36.50±.2(1.44±.01)

FrameDoor

Bracket

Stud

Mounting nut

Door

Frame

56(2.20)

B Grip range(see table)

Stud, M4 Thread

25(.97)

13 (.50)

1 (.04)

47(1.84)

42.5(1.67) 14 (.56)

Cup

Slide

CoverBracket

Mounting nut

Paddle

Grip Range Part Number AB

Minimum Maximum Stainless Steel, Brushed Stainless Steel Black Powder coated Minimum Maximum

1.2 (.05) 2 (.08) 64-11-10 64-11-12 10.4 (.41) 12.7 (.50) 11.5 (.45)

2 (.08) 2.8 (.11) 64-11-20 64-11-22 11.2 (.44) 13.5 (.53) 11.9 (.47)

2.8 (.11) 3.6 (.14) 64-11-30 64-11-32 11.9 (.47) 14.2 (.56) 12 (.48)

Part NumberSee table

64 Push-to-Close LatchPull-to-open · Paddle latch · Small

• Single hole installation• Concealed mounting• Metal slide

Material and FinishStainless steel passivated and brushed or black powder coated, steel, chrome plated



247


64 - 2 L - 1 M

ACTUAL SIZE

www.southco.com/64

8(.31)

84(3.31)

1.2 (.05)

M5 Thread

Gap important(See installation notes)

68.5(2.69)

19(.75)

36(1.39)

17.5(.69)

6.4 (.25) Maximum

Doorthickness

7.9 (.31)

Frame

DoorLatch

Mounting bracketAdjusting nut

LockwasherMounting nut

Available with or without lock(see part number selection)

R 2.5 (.09) Maximum

DoorFrame

Minimum 8 (.31)Maximum 11 (.44)

55.5(2.19±.01)

+0.3- 0.1

71.5(2.81±.01)

+0.1- 0.3

Gapimportant(see installation notes)

Edge of frame ormodified latchingsurface (notch,hole, bracket orshim)

11.1 (.44) Min

Adjusting nut

Mountingbracket


SlideFrame

7.9 (.31)8. (.31) Minimum11 (.44) Maximum

14.3 (.56) Ref

Door

___________________________________________________________________________ Part Number Selection

64 Push-to-Close LatchPull-to-open · Paddle latch · Medium


Material and FinishStainless steel brushed, steel, zinc plated or steel, black powder coated or silver


Installation NotesMeasure your door thickness and set adjusting nut so that Gap is equal to door thickness within plus 0.8 (.03), minus 0.0 (.00).

AccessoriesFlat key, keyed alike H257 (2 keys per ring) Part number: 64-0-33578

M Material0 Stainless steel, brushed 1 Steel, black powder coated3 Steel, zinc plated5 Steel, powder coated silver

L Lock style1 Non-locking2 Key-locking keyed alike H257 (2 Flat keys supplied) Other options available. For complete details

on variety, part numbers, installation and specification, go to

248


64 - 10 - 30 L - M 0

ACTUAL SIZE

www.southco.com/64

Gap important(See installation notes)

Frame

Door

Mounting bracket

Adjusting nutLockwasher

Mounting nut

127 (5.0)

28.5(1.13)

101.5(4)

11(.44)

Available with or without lock (see part number selection)

11.9(.47)

1.6(.06)

4.5 (.17)

1/4-20 Thread

49(1.94)

25.5(1.01)

Maximum door thickness9.5 (.38)

R 3 (.13) Maximum

DoorFrame

Minimum 11 (.44)Maximum 15.9 (.63)

82.5(3.25±.01)

+0.3- 0.2

108(4.25±.01)

+0.2- 0.3

Gapimportant(see installation notes)

Edge of frame ormodified latchingsurface (notch,hole, bracket orshim)

14.3 (.56) Min

Adjusting nut

Mountingbracket


SlideFrame

11.9 (.47)20.6 (.81) Ref

Part Number Selection _______________________________________________________________________________

64 Push-to-Close LatchPull-to-open · Paddle latch · Large


Material and FinishStainless steel, brushed, steel, zinc plated or steel, black powder coated


Installation NotesMeasure your door thickness and set adjusting nut so that GAP is equal to door thickness within plus 0.8 (.03), minus 0.0 (.00)

AccessoriesFlat key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01

Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05

L Lock style1 Non-locking2 Key-locking keyed alike CH751 (2 Flat keys supplied)

M Material4 Steel, zinc plated 5 Stainless steel brushed9 Steel, black powder coated


249


64 - 50 - 4 L H - M

ACTUAL SIZE

www.southco.com/64

10.2 (.40)

108 (4.25)

139.7 (5.50)

22.6 (.89)

23.4 (.92)

1.2(.05)

43 (1.7)

4 x Ø rivet mounting onlyH


Tapped hole 1/4-20 for inside release handle (not provided)

Frame

4 x R5 (.20)Maximum

Door

96.8(3.81)

86(3.38)

118 (4.65)95.2 (3.75)

20.9 (.82) 22(.87)

14 (.55)

15 (.59)4 x Ø rivetmounting only

H


64 Push-to-Close LatchPull-to-open · Paddle latch · Large

• Single hole installation• Multiple mounting styles • Inside actuation in locked or unlocked position

Material and FinishStainless steel, polished, steel, zinc plated or steel, black powder coated

Slide bolt and lock assembly: Zinc plated or powder coated




H Housing0 Weld1 Rivet through hole 4.9 (.19)2 Rivet through hole 5.2 (.20)


M Material10 Steel, zinc plated 20 Stainless steel polished50 Steel, black powder coated


251


64 - 60 - 5 L H - M

ACTUAL SIZE

www.southco.com/64

83(3.27)

88.4(3.48)

9(.35)

5.3 (.21)

52(2.05)

110(4.33)

170 (6.7)

7 (.28)5 (.20)

100(3.94)

52(2.05)

52(2.05)

8 x Ø rivet mounting latches onlyH


Frame

37.9 (1.49)17.2 (.68)

Door thickness

147.7 (5.81)

89(3.50)

Door

4 x R5Maximum


64 Push-to-Close LatchPull-to-open · Paddle latch · Heavy-duty pivot

• Robust design resists binding from dirt and debris• Multiple mounting styles

Material and FinishSteel, zinc plated or black powder coated

Slide bolt and lock assembly: Zinc plated or powder coated


AccessoriesFlat key, keyed alike 14603 (2 keys per ring) Part number: PK-10-01-14603


L Lock style0 Non-locking1 Key-locking keyed alike 14603 (2 Flat keys supplied)

M Material10 Steel, zinc plated 50 Steel, black powder coated


271A


64 - 40 - 4 L H - M

ACTUAL SIZE

www.southco.com/64

108 (4.25)

139.7 (5.50)

23(.91)

1.2(.05)

40.9 (1.61)

12(.45)

3(.13)

Ø 6.3(.25)

Ø 2.3(.09)

47 (1.85) Unlatched

70 (2.75)Latched

29 (1.14)Latched

25 (1.0) Unlatched

4 x Ø rivet mounting onlyH


4 x R 5 (.20)Maximum

4 x ØRivet mounting only

Door

96.8(3.81)

86(3.38)

118 (4.65)95.2 (3.75)

H

64 Push-to-Close ActuatorPull-to-open · Paddle handle actuator · Multi-point · Large

Part Number Selection _______________________________________________________________________________

• Flush mounting installation• Multiple mounting styles• Locking and Non-Locking options

Material and FinishStainless steel, polished, steel, zinc plated or black powder coated



NotesAC Cable end fitting must be eyelet for this actuator (Page 272)



M Material10 Steel, zinc plated 20 Stainless steel, polished50 Steel, black powder coated


(2 PL) For use with AC Cables, must use eyelet fitting. Use cotter pin to secure end fitting.

64 push-to-close latch · 64-10-125-50 64-10-135-50 64-10-115-50 64-10-115-50 18.6 (.73) 19.4 (.77)...

Documents