61168147 manual-de-servicio-sharp-al-2030-2040cs-2050cs
DESCRIPTION
TRANSCRIPT
SERVICE MANUAL
Parts marked with “ ” are important for maintaining the safety of the set. Be sure to replace these parts withspecified ones for maintaining the safety and performance of the set.
CONTENTS
CODE: 00ZAL2040CS2E
DIGITAL MULTIFUNCTIONAL SYSTEM
AL-2030AL-2040CS
MODEL AL-2050CSAL-2050CS
[1] GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
[2] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
[3] CONSUMABLE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . . . . 4 - 1
[5] UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1
[6] COPY PROCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1
[7] OPERATIONAL DESCRIPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1
[8] DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1
[9] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1
[10] SIMULATION, TROUBLE CODES . . . . . . . . . . . . . . . . . . . . . . . 10 - 1
[11] USER PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 1
[12] ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 1
[13] CIRCUIT DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 1
This document has been published to be usedfor after sales service only.The contents are subject to change without notice.
SHARP CORPORATION
CAUTION
This laser radiation is not a danger to the skin, but when an exact focusing of the laser beam is achievedon the eye’s retina, there is the danger of spot damage to the retina.
The following cautions must be observed to avoid exposure of the laser beam to your eyes at the time ofservicing.
1) When a problem in the laser optical unit has occurred, the whole optical unit must be exchanged as aunit, not as individual parts.
2) Do not look into the machine with the main switch turned on after removing the developer unit, tonercartridge, and drum cartridge.
3) Do not look into the laser beam exposure slit of the laser optical unit with the connector connectedwhen removing and installing the optical system.
4) The middle frame contains the safety interlock switch.
Do not defeat the safety interlock by inserting wedges or other items into the switch slot.
LASER WAVE – LENGTH : 770 ~ 795nmPulse times : 12.88µs ± 12.88ns/7mmOut put power : MAX 0.2mW
CAUTIONINVISIBLE LASER RADIATION,
WHEN OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM.
VORSICHTUNSICHTBARE LASERSTRAHLUNG,WENN ABDECKUNG GEÖFFNET UNDSICHERHEITSVERRIEGELUNG ÜBERBRÜCKT.NICHT DEM STRAHL AUSSETZEN.
VARO !AVATTAESSA JA SUOJALUKITUSOHITETTAESSA OLET ALTTIINANÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE ÄLÄKATSO SÄTEESEEN.
ADVARSELUSYNLIG LASERSTRÅLNING VED ÅBNING, NÅRSIKKERHEDSBRYDERE ER UDE AFFUNKTION. UNDGÅ UDSAETTELSE FORSTRÅLNING.
VARNING !OSYNLIG LASERSTRÅLNING NÄR DENNA DELÄR ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD.BETRAKTA EJ STRÅLEN. – STRÅLEN ÄRFARLIG.
This product is a class 1 laser product that complies with 21CFR 1040 of the CDRH standard andIEC825. This means that this machine does not produce hazardous laser radiation. The use of controls,adjustments or performance of procedures other than those specified herein may result in hazardousradiation exposure.
At the production line, the output powerof the scanner unit is adjusted to 0.18MILLI-WATT PLUS 20 PCTS and ismaintained constant by the operation ofthe Automatic Power Control (APC).Even if the APC circuit fails in operationfor some reason, the maximum outputpower will only be 15 MILLI-WATT 0.1MICRO-SEC. Giving and accessibleemission level of 42 MICRO-WATTwhich is still-less than the limit ofCLASS-1 laser product.
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLAKUIN TÄSSÄ KÄYTTÖOHJEESSA MAINITULLATAVALLA SAATTAA ALTISTAA KÄYTTÄJÄNTURVALLISUUSLUOKAN 1 YLITTÄVÄLLENÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
VARNING - OM APPARATEN ANVÄNDS PÅ ANNATSÄTT ÄN I DENNA BRUKSANVISNINGSPECIFICERATS, KAN ANVÄNDAREN UTSÄTTASFÖR OSYNLIG LASERSTRÅLNING, SOMÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1.
CautionThis product contains a low power laserdevice. To ensure continued safety do notremove any cover or attempt to gain accessto the inside of the product. Refer allservicing to qualified personnel.
LUOKAN 1 LASERLAITEKLASS 1 LASER APPARAT
The foregoing is applicable only to the 220Vmodel, 230V model and 240V model.
CONTENTS
[1] GENERAL1. Major functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[2] SPECIFICATIONS1. Basic Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12. Operation specifications . . . . . . . . . . . . . . . . . . . . . . . . 2-13. Copy performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24. GDI Printer (AL-2030/2040CS) . . . . . . . . . . . . . . . . . . . 2-35. SPLC printer (AL-2050CS only). . . . . . . . . . . . . . . . . . . 2-36. Scan function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37. SPF (AL-2030/2040CS). . . . . . . . . . . . . . . . . . . . . . . . . 2-48. RSPF (AL-2050CS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
[3] CONSUMABLE PARTS1. Supply system table. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
A. SEC/SECL (AL-2030/2040CS/2050CS). . . . . . . . . . 3-1B. Brazil (AL-2030/2040CS) . . . . . . . . . . . . . . . . . . . . . 3-1
2. Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13. Production control number (lot No.) identification . . . . . 3-2
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES1. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12. Internal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13. Operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
A. AL-2030/2040CS . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2B. AL-2050CS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
4. Motors and solenoids. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5A. AL-2030/2040CS . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5B. AL-2050CS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
5. Sensors and switches . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7A. AL-2030/2040CS (For the AL-2030,
the 2nd cassette is not provided.) . . . . . . . . . . . . . . 4-7B. AL-2050CS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
6. PWB unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9A. AL-2030/2040CS . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9B. AL-2050CS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
7. Cross sectional view . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11A. AL-2030/2040CS . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11B. AL-2050CS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
[5] UNPACKING AND INSTALLATION1. Copier installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12. Cautions on handling . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13. Checking packed components and accessories . . . . . . 5-14. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25. Removing protective packing materials . . . . . . . . . . . . . 5-26. Installing the TD cartridge . . . . . . . . . . . . . . . . . . . . . . . 5-27. Loading paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-38. Power to copier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-39. Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
A. Before installation. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3B. Installing the software. . . . . . . . . . . . . . . . . . . . . . . . 5-4C. Setting up Button Manager
(AL-2040CS/2050CS only). . . . . . . . . . . . . . . . . . . . 5-910. Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
A. USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10B. RJ45 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
11. Moving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1012. Scanner moisture-proof kit. . . . . . . . . . . . . . . . . . . . . . 5-10
A. Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10B. Precautions at installation . . . . . . . . . . . . . . . . . . . 5-10C. Attachment method . . . . . . . . . . . . . . . . . . . . . . . . 5-11
[6] COPY PROCESS1. Functional diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12. Outline of print process . . . . . . . . . . . . . . . . . . . . . . . . . 6-23. Actual print process . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
[7] OPERATIONAL DESCRIPTIONS1. Outline of operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12. Scanner section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
A. Scanner unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2B. Optical system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
3. Laser unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3A. Basic structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3B. Laser beam path. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3C. Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
4. Fuser section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3A. General description . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
5. Paper feed section and paper transport section . . . . . . 7-4A. Paper transport path and general operations . . . . . . 7-4
6. Process unit new drum detection mechanism . . . . . . . . 7-77. SPF/RSPF section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7
A. Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-7B. Document transport path and basic composition . . .7-8C. Operational descriptions. . . . . . . . . . . . . . . . . . . . . . 7-8D. SPF/RSPF open/close detection
(book document detection) . . . . . . . . . . . . . . . . . . . . 7-98. D-D (Duplex to Duplex) mode paper/
document transport (Duplex model) (AL-2050CS only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9A. Initial state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9B. Front copy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9C. Back copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
9. Shifter (AL-2050CS only) . . . . . . . . . . . . . . . . . . . . . . .7-10
[8] DISASSEMBLY AND ASSEMBLY1. High voltage section. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . . 8-1C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . .8-1D. Charger wire cleaning. . . . . . . . . . . . . . . . . . . . . . . .8-1E. Charger wire replacement . . . . . . . . . . . . . . . . . . . . 8-2
2. Operation panel section . . . . . . . . . . . . . . . . . . . . . . . . .8-2A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . . 8-2C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . .8-3
3. Optical section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . . 8-3C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . .8-5
4. Fusing section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . . 8-5C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . .8-8
5. Tray paper feed/transport section . . . . . . . . . . . . . . . . . 8-8A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . . 8-8C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . .8-14
6. Manual paper feed section. . . . . . . . . . . . . . . . . . . . . . 8-14A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . 8-14C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . .8-16D. Pressure plate holder attachment. . . . . . . . . . . . . . 8-16
7. Rear frame section. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . 8-16C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . .8-17
8 Power section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . 8-18C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . .8-18
9. Duplex motor section (AL-2040CS/2050CS only) . . . . 8-18A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . 8-18C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . 8-18
10. Reverse roller section (AL-2040CS/2050CS only) . . . 8-18A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . 8-18C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . 8-18
11. RSPF section (AL-2050CS only) . . . . . . . . . . . . . . . . . 8-19A. Front cabinet, rear cabinet . . . . . . . . . . . . . . . . . . . 8-19B. Upper door unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19C. Document tray unit . . . . . . . . . . . . . . . . . . . . . . . . . 8-19D. Upper door open/close sensor . . . . . . . . . . . . . . . . 8-19E. Reverse clutch, paper exit roller. . . . . . . . . . . . . . . 8-19F. Drive unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20G. Shutter solenoid . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-21H. Pickup roller, take-up roller. . . . . . . . . . . . . . . . . . . 8-21I. Paper empty sensor . . . . . . . . . . . . . . . . . . . . . . . . 8-22J. PS roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-22K. Upper transport roller . . . . . . . . . . . . . . . . . . . . . . . 8-23L. Paper sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-23M. Lower transport roller . . . . . . . . . . . . . . . . . . . . . . . 8-23N. Paper exit sensor . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24
12. SPF section (AL-2030/2040CS only). . . . . . . . . . . . . . 8-24A. SPF motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24B. Pick-up roller, paper feed roller . . . . . . . . . . . . . . . 8-25C. Paper exit roller . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-26D. Set sensor, scan front sensor. . . . . . . . . . . . . . . . . 8-26E. Transport roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-26
13. 2nd cassette section (AL-2040CS/2050CS only) . . . . 8-27A. Paper sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-27B. Cassette detection switch. . . . . . . . . . . . . . . . . . . . 8-28C. Paper feed solenoid . . . . . . . . . . . . . . . . . . . . . . . . 8-28D. Transport roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-28E. Paper feed clutch . . . . . . . . . . . . . . . . . . . . . . . . . . 8-28F. 2nd paper feed roller . . . . . . . . . . . . . . . . . . . . . . . 8-28
[9] ADJUSTMENTS1. Optical section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
A. Copy magnification ratio adjustment . . . . . . . . . . . . 9-1B. Image position adjustment . . . . . . . . . . . . . . . . . . . . 9-2
2. Copy density adjustment . . . . . . . . . . . . . . . . . . . . . . . . 9-4A. Copy density adjustment timing . . . . . . . . . . . . . . . . 9-4B. Note for copy density adjustment . . . . . . . . . . . . . . . 9-4C. Necessary tool for copy density adjustment. . . . . . . 9-4D. Features of copy density adjustment . . . . . . . . . . . . 9-4E. Copy density adjustment procedure. . . . . . . . . . . . . 9-5
3. High voltage adjustment . . . . . . . . . . . . . . . . . . . . . . . . 9-5A. Main charger (Grid bias). . . . . . . . . . . . . . . . . . . . . . 9-5B. DV bias check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6
4. Duplex adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6A. Adjusting the paper reverse position in memory
for duplex copying . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6B. Adjusting trailing edge void in duplex copy mode . . 9-6
5. SPF/RSPF scan position automatic adjustment . . . . . . 9-76. SPF/RSPF mode sub scanning direction
magnification ratio adjustment . . . . . . . . . . . . . . . . . . . . 9-87. Automatic black level correction . . . . . . . . . . . . . . . . . . 9-8
[10] SIMULATION, TROUBLE CODES1. Entering the simulation mode . . . . . . . . . . . . . . . . . . . 10-12. Key rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13. List of simulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-14. Descriptions of various simulations . . . . . . . . . . . . . . . 10-25. Trouble codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-30
A. Trouble codes list . . . . . . . . . . . . . . . . . . . . . . . . . 10-30B. Details of trouble codes . . . . . . . . . . . . . . . . . . . . 10-30
[11] USER PROGRAM1. Functions that can be set with user programs . . . . . . . 11-12. Toner save mode (AL-2030/2040CS) . . . . . . . . . . . . .11-13. User programs (AL-2030/2040CS) . . . . . . . . . . . . . . . 11-14. User programs (AL-2050CS) . . . . . . . . . . . . . . . . . . . . 11-2
A. Copy mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-2B. Print mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4
[12] ELECTRICAL SECTION1. Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
A. Overall block diagram. . . . . . . . . . . . . . . . . . . . . . .12-12. Actual wiring diagram. . . . . . . . . . . . . . . . . . . . . . . . . . 12-3
A. AL-2030 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-3B. AL-2040CS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-5C. AL-2050CS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-7D. AL-2040CS/2050CS . . . . . . . . . . . . . . . . . . . . . . . .12-9
3. Signal name list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-9
[13] CIRCUIT DIAGRAM1. MCU PWB (AL-2030/2040CS). . . . . . . . . . . . . . . . . . . 13-12. OPERATION PWB (AL-2030/2040CS) . . . . . . . . . . . 13-143. MCU PWB (AL-2050CS) . . . . . . . . . . . . . . . . . . . . . . 13-154. OPERATION PWB (AL-2050CS). . . . . . . . . . . . . . . . 13-31
AL-2030/2040CS/2050CS GENERAL 1 - 1
[1] GENERAL
1. Major functionsConfigurations
Descriptions of itemsCPM: Copy speed (Copies Per Minute)
PPM: Print speed (Print Per Minute)
SB/MB: SB = Manual feed single bypass, MB = Manual feed multi-bypass
2 tray: Second cassette unit.
SPF: Original feed unit
R-SPF: Duplex original feed unit
Color scanner: Color scanner function
GDI printer: GDI printer function with USB
SPLC printer: SPLC printer function
E-SORT: Electronic sort function
Duplex: Auto duplex copy/print function
Shifter: Job separator function
FAX: FAX function.
Sharpdesk: Scanner utilities
IEEE1284: Interface port (parallel)
USB: Interface port (USB)
RJ45: Interface port (Network)
External NIC: Network expansion kit
Descriptions of table: Standard provision
: No function or no option available
Opt: Option
ItemCPM
(Letter)PPM
(Letter)SB/MB
2 Tray
SPFR-
SPF
Color Scanner (push)
GDI printer
SPLC printer
E-SORT
Duplex Shifter FAX Sharpdesk
IEEE1284
USB RJ45External
NICModelAL-2030 20
CPM16
PPMMB
(2.0Full)
AL-2040CS 20CPM
16PPM
MB(2.0Full)
(print only)
AL-2050CS 20CPM
20PPM
MB(2.0Hi)
(print only)
AL-2040CSAL-2030
AL-2050CS
[2] SPECIFICATIONS
1. Basic Specifications
2. Operation specifications
Item
Type Desktop
Copy system Dry, electrostatic
Segment (class) Digital personal copier
Copier dimensions AL-2030 20-1/2" (W) x 17-5/8" (D) x 14-1/8" (H) (518mm (W) x 445mm (D) x 358mm (H))AL-2040CS 20-1/2" (W) x 17-5/8" (D) x 17-5/8" (H) (518mm (W) x 445mm (D) x 445mm (H))
AL-2050CS 20-1/2" (W) x 17-5/8" (D) x 18-1/8" (H) (518mm (W) x 445mm (D) x 459mm (H))
Weight (Approximately) AL-2030 37.9 lbs. (17.2Kg) TD cartridge not included
AL-2040CS 45.9 lbs. (20.8Kg)
AL-2050CS 51.2 lbs. (23.2Kg)
Section, item Details
Paper feed section
Paper feed system
AL-2030 1 tray (250 sheet) + multi-bypass (50 sheet)
AL-2040CS/2050CS 2 tray (500 sheet) + multi-bypass (50 sheet)Inch system
Tray paper feed section
Paper size 8-1/2" x 14", 8-1/2" x 13", 8-1/2 x 11", 8-1/2" x 5-1/2" (Landscape)
Paper weight 15 - 21 lbs.Paper feed capacity 250 sheets
Kinds Standard paper, specified paper, recycled paper
Remark User adjustment of paper guide available
Multi-bypass paper feed section
Paper size Max, feedable size: 8-1/2" x 14" / Min, feedable size: 3.87" x 5.83"
Paper weight 15 - 34.5 lbs.
Paper feed capacity 50 sheets
Kinds Standard paper, specified paper, recycled paper, OHP, Label, Envelop (Single copy)
Remark User adjustment of paper guide available
AB system Tray paper feed section
Paper size A4, B5, A5 (Landscape)
Paper weight 56 - 80g/m2 (15 - 21 lbs.)Paper feed capacity 250 sheets
Kinds Standard paper, specified paper, recycled paper
Remark User adjustment of paper guide available
Multi-bypass paper feed section
Paper size Max, feedable size: A4 / Min, feedable size: 89 x 140mm
Paper weight 56 - 128g/m2 (15 - 34.5 lbs.)
Paper feed capacity 50 sheets
Kinds Standard paper, specified paper, recycled paper, OHP, Label, (Single copy)
Remark User adjustment of paper guide available
Paper exit section Exit way Face downCapacity of output tray 200 sheets
Originals Original set Center Registration (left edge)
Max. original size 8-1/2" x 14" (A4)
Original kinds sheet, book
Original size detection None
Optical section
Scanning section
Scanning system 3 CCDs (RGB) sensor scanning by lighting white lampCCD sensor Resolution 600 dpi
Lighting lamp Type CCFL
Voltage 560Vrms
Power consumption 2.8W
Output data Output: R, G, B 1 or 8 bits/pixel / Input: A/D 16 bits (12 bits actual)
Writing section
Writing system Writing to OPC drum by the semiconductor laser
Laser unit Resolution 600 dpi
AL-2030/2040CS/2050CS SPECIFICATIONS 2 - 1
3. Copy performance
*1: The first-copy time is measured after the power save indicator turns off following power on, using the document glass with the polygon rotat-ing in the copy ready state and "Selection of copy start state" set to ON in the user programs (8-1/2" x 11" (A4), paper fed from paper tray).
The first-copy time may vary depending on machine operating conditions and ambient conditions such as temperature.
Image forming Photoconductor Type OPC (30ø)
Life 18kCharger Charging system Saw-tooth charging with a grid, / (-) scorotron discharge
Transfer system (+) DC corotron system
Separation system (-) DC corotron system
Developing Developing system Dry, 2-component magnetic brush development system
Cleaning Cleaning system Counter blade system (Counter to rotation)
Fusing section Fusing system Heat roller systemUpper heat roller Type Teflon roller
Lower heat roller Type Silicon rubber roller
Heater lamp Type Halogen lamp
Voltage 120V
Power consumption 800W
Electrical section Power source Voltage 120VFrequency Common use for 50 and 60Hz
Power consumption Max. Less than 1000W
Average (during copying) 350Wh/H or less (AL-2030/2040CS)
380Wh/H or less (AL-2050CS)
Average (stand-by) 80Wh/H or less
Pre-heat mode 25Wh/H or less (AL-2030/2040CS)
28Wh/H or less (AL-2050CS)
Auto power shut-off mode 8.8W or less (AL-2030/2040CS)
12.5W or less (AL-2050CS)
Section, item Details AL-2030/2040CS/2050CS
Copy magnification Fixed magnification ratios
4 Reduction + 3 Enlargement
(Inch system: 25, 50, 64, 78, 100, 129, 200, 400%)
(AB system: 25, 50, 70, 86, 100, 141, 200, 400%)Zooming magnification ratios
25 - 400% (376 steps in 1% increments)
50 - 200% when using SPF/RSPF (151 steps in 1% increments)
Manual steps (manual, photo) 5 steps
Copy speed (CPM) First-copy time *1 (Approximately)
AL-2030/2040CS:
8.0 seconds (When user program 24 is set to OFF)
AL-2050CS:
10.7 seconds
(paper: A4 (8-1/2" x 11"), exposure mode: AUTO, copy ratio: 100%)
Inch system
8-1/2" x 11" (Landscape)
Same size 20
AB system
A4 (Landscape)
Same size 20
AB system
B5 (Landscape)
Same size 20
Max. continuous copy quantity 99Void Void area Leading edge 1 - 4mm
Trailing edge 4mm or less
Side edge void area 0.5mm or more (per side)
4.5mm or less (total of both sides)
Image loss Leading edge same size: 3.0mm or less (OC) / 4mm or less (SPF/RSPF)
Enlarge: 1.5mm or less (OC) / 3mm or less (SPF/RSPF)
Reduction (50%): 6.0mm or less (OC) / 8mm or less (SPF/RSPF)
Warm-up time 0 sec. Immediately the ready lamp is lit.
Power save mode reset time 0 sec. Immediately the ready lamp is lit.Paper jam recovery time 0 sec.
∗ Jam recovery condition: Recovery time from 60 sec of door open.
Section, item Details
AL-2030/2040CS/2050CS SPECIFICATIONS 2 - 2
4. GDI Printer (AL-2030/2040CS)
*1: Engine Resolution
*2: By running change
5. SPLC printer (AL-2050CS only)
*1: Engine Resolution
*2: Running change
6. Scan function
*1: By running change
Print speed Max. 16ppm (excluding bypass tray, paper size A4, 8.5" x 11") (Variable depending on the PC performance)Duplex Yes (AL-2040CS only)
Memory 8MB (Duplex model: 16MB)
Interface USB 2.0 (Full speed) (AL-2040CS only)
Network Built-in NIC (10 Base) (AL-2040CS only)
Emulation GDI
MIB support NoResolution 600dpi *1
Supported OS Windows 98/Me, Windows 2000 Professional, Windows XP Home Edition/Professional, Windows Vista *2
WHQL support Yes *2
Application Status window
Print speed Max. 20ppm (Paper size: A4, excluding manual paper feed)
∗ Varies depending on the PC performance.
First print time 8 sec. (without data transfer time)
Duplex Yes
ROPM Yes
Memory 64MB
Interface USB2.0 (Hi Speed)Network Built-in NIC (10 Base)
Emulation SPLC (JBIG GDI)
MIB support No
Resolution 600dpi *1
Supported OS Windows 98/Me, Windows 2000 Professional, Windows XP Home Edition/Professional, Windows Vista
WHQL support Yes *2Application Status window
AL-2030/2040CS AL-2050CS
Type Flat Bed Color Scanner
Scanning system Original table/SPF Original table/RSPF
Light source 3 CCDs (RGB) sensor scanning by lighting white lamp (2 pcs of CCFL)Resolution Optical: 600 x 1200dpi
Setting range: 50 - 9600dpi (Preview resolution is fixed at 75dpi)
Originals Sheet type / Book type
Output data R, G, B 1 or 8 bits/pixel
Scan range OC / SPF : 8.5" (H) x 14.0" (V)
Original position: Left Center
OC / RSPF : 8.5" (H) x 14.0" (V)
Original position: Left Center
Scan speed OC / SPF : Max. 2.88ms/line OC / RSPF : Max. 2.88ms/line
Protocol TWAIN / WIA (XP, Vista) / STIInterface USB2.0 (Full speed support) USB2.0 (Hi speed support)
Scanner utility Button Manager / Sharpdesk / Composer
Scan key/lamp Yes
Duplex scan No Yes
Supported OS Win 98 / Me / 2000 / XP / Vista *1
Void area No (User settable by PC)WHQL supported Yes *1
AL-2030/2040CS/2050CS SPECIFICATIONS 2 - 3
7. SPF (AL-2030/2040CS)
8. RSPF (AL-2050CS)
[Conditions] Speed with tray 1, normal size, paper size of 8.5" x 11" (A4), and RSPF.
*1: Indicates the speed from 1st to 30th sheet (i.e., 60th surface).
Original capacity 50 sheets (15 - 23.9 lbs.) (56 - 90g/m2) Stacking Height: less than 6.5mm or 1/4"Original size 8-1/2" x 14" to 5-1/2" x 8-1/2" / A4 to A5 (Landscape)
Original replacement speed 8-1/2" x 11" about 14 sheets (70%)
A4 about 14 sheets (70%)
Original placement Face up
Original weight 15 - 23.9lbs. (56 - 90g/m2)
Mixed feeding (Paper size) No
Original which cannot Thermal papers, originals with punch holes for files, be used folded paper, transparent originals such as OHP films, stapled or clip used originals with cover up liquid used, Originals with tape sealed, originals with high level frictional coefficient such as photos or catalogs.
Original capacity 50 sheets (56 - 90g/m2) or 6.5mm, 1/4" or less.
Original size 8-1/2" x 14" to 5-1/2" x 8-1/2" / A4 to A5 (Landscape)
Original replacement speed 8-1/2" x 11" about 14 sheets (70%)
A4 about 13 sheets (65%)
Job speed (Tray1, Landscape) Single copy S to S About 14CPM (8-1/2" x 11") About 13CPM (A4)
S to D About 10CPM (1 - 30 sheets)(*1) About 5.6CPM (31 sheets ~)
D to S About 6CPMD to D About 6CPM (1 - 30 sheets)(*1) About 5.6CPM (31 sheets ~)
Multi copy S to S About 20CPM
S to D About 13CPM (1 - 30 sheets)(*1) About 5.6CPM (31 sheets ~)
D to S About 16CPM
D to D About 13CPM (1 - 30 sheets)(*1) About 5.6CPM (31 sheets ~)
Original placement Face upOriginal weight 15 - 23.9lbs. (56 - 90g/m2)
Mixed feeding No
Original which cannot Thermal papers, originals with punch holes for files, be used folded paper, transparent originals such as OHP films, stapled or clip used originals with cover up liquid used, Originals with tape sealed, originals with high level frictional coefficient such as photos or catalogs.
AL-2030/2040CS/2050CS SPECIFICATIONS 2 - 4
[3] CONSUMABLE PARTS
1. Supply system tableA. SEC/SECL (AL-2030/2040CS/2050CS)
B. Brazil (AL-2030/2040CS)
2. EnvironmentalThe environmental conditions for assuring the copy quality and the machine operations are as follows:
(1) Normal operating conditionTemperature: 20°C - 25°C
Humidity: 65 ± 5%RH
(2) Acceptable operating condition
(3) Transport condition
(4) Supply storage condition
No. Name Content Life Product name Package1 Develop cartridge (Black) x 1 Toner/developer cartridge x 1 6K
(5% document)
AL-100TD 5
2 Develop cartridge (Black) x 1 Toner/developer cartridge x 1 4K
(5% document)
AL-110TD 5
3 Drum cartridge Drum cartridge 18K AL-100DR 5
No. Name Content Life Product name Package
1 Develop cartridge (Black) Toner/developer cartridge x 1
Warranty card x 1
IC-Chip: No Stirring function: Yes
6K
(A4 5% document)
AL-100TDN 5
2 Drum cartridge Drum cartridge x 1
Warranty card x 1
18K
(A4 5% document)
AL-100DR 5
Humidity (RH)
85%
60%
20%
10˚C 30˚C 35˚C
Humidity (RH)
90%
60%
15%
–25˚C 30˚C 40˚C
Humidity (RH)
90%
20%
–5˚C 45˚C
AL-2030/2040CS/2050CS CONSUMABLE PARTS 3 - 1
3. Production control number (lot No.) identification<Developing cartridge>
∗ Destination
<Drum cartridge>
The label on the drum cartridge shows the date of production.
(SOCC production)
<JAPAN production> *1: The production control label is not attached to the cartridge ofa China product.
Division No.EX Destination A same pack G
B same pack H
Option Destination A P
B Q
Division No.
Ex production 1
Option 2
Same pack 3
Production month
Production day
Destination code
(Dealer, distributor, OEM, etc.)
Production place
(SOCC: Fixed to B.)
End digit of year
Version No.
Production month
Production day
Destination code
(Dealer, distributor, OEM, etc.)
Production place
(SOCC: Fixed to B.)
End digit of year
Version No.
X000119Ver.A 1
Production month
(1 - 9 = Jan. - Sep. 0 = Oct. X = Nov. Y = Dec.)
Serial number of month
Fixed to 1.
Pack division
(See table below)
End digit of year
Version No.
Production controllabel attachment position
Production controllabel attachment position(*1)
AL-2030/2040CS/2050CS CONSUMABLE PARTS 3 - 2
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. Appearance
2. Internal
1 Document glass 2 Operation panel 3 Front cover4 Paper tray 1 5 Paper tray 2 (AL-2040CS/2050CS only) 6 Multi-bypass tray
7 Side cover 8 Side cover open button 9 Bypass tray paper guides
10 Paper output tray 11 Paper output tray extension 12 Power switch
13 Handle 14 Power cord
1 Front cover 2 Side cover 3 Fusing unit release lever4 Transfer charger 5 Charger cleaner
LAN connector (AL-2040CS/2050CS only)
Interface
USB connector(AL-2030/2040CS)
Interface
SPF/RSPF
Exit area
2
3
4
5
1
7
98
1011
Original guide
Document feeder tray
Peep hole (SPF only)
Document feeder cover
12
1314
6
USB connector(AL-2050CS
TD cartridge Drum cartridge
3
4
5
2
1
AL-2030/2040CS/2050CS EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 1
3. Operation panelA. AL-2030/2040CS
*1: Drum cartridge replacement
The useful life of the drum cartridge is approximately 18,000copies*. When the internal counter reaches approximately17,000 copies, the drum replacement required ( ) indicatorwill light up indicating that replacement of the drum cartridgewill be needed soon. For more information on purchasing thedrum cartridge, please refer to the Operation Manual. When theindicator begins to blink, the unit will stop operating until the car-tridge is replaced. Replace the drum cartridge at this time.
*: Based on copying onto letter size paper at 5% toned area.
*2: TD cartridge replacement
The TD cartridge replacement required ( ) indicator will lightup when toner is needed. For more information on purchasingthe TD cartridge. If copying is continued while the indicator is lit,copies will gradually become lighter until the unit stops and theindicator begins blinking.
*3: Indicators on the operation panel
The ONLINE indicator and the start ( ) indicator indicate thestate of the printer or scanner.
Start indicator
1 Original to copy key and indicators (AL-2040CS only) 2 Exposure mode selector key and indicatorsUse to sequentially select the exposure modes: AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit indicator.
Two-sided copies from one-sided originals.
Turn on Long Edge or Turn on Short Edge can be selected.
3 Light and dark keys and indicatorsUse to adjust the MANUAL or PHOTO exposure level. Selected exposure level is shown by a lit indicator. Use to start and terminate user program setting.
4 Alarm indicatorsDrum replacement required indicator *1
Misfeed indicator
TD cartridge replacement required indicator *25 SPF indicator 6 SPF misfeed indicator7 Copy ratio selector key and indicators
Use to sequentially select preset reduction/enlargement copy ratios.
Selected copy ratio is shown by a lit indicator.
8 Copy ratio display (%) key• Use to verify a zoom setting without changing the zoom ratio.• Use to check the number of originals that must be returned to
the document feeder tray if an original misfeed occurs whileusing the SPF.
9 DisplayDisplays the specified copy quantity, zoom copy ratio, user program code, and error code.
10 SCAN key and indicator (AL-2040CS only) *3, *4
11 ONLINE key and indicatorLights up when the unit is used as a printer and scanner (AL-2040CS only). *3
12 Start key and indicator• Copying is possible when the indicator is on.• Press to start copying• Use to set a user program.
13 Power save indicatorLights up when the unit is in a power save mode.
14 Tray select keyUse to select a paper feed station (paper tray 1, paper tray 2 (AL-2040CS only) or multi-bypass tray).
15 Paper feed location indicatorsLight up to show the selected paper feed station.
16 ZOOM keys and indicatorUse to select any reduction or enlargement copy ratio from 25% to 400% in 1% increments. (When the SPF is being used, the zoom copy ratio range is 50% to 200%.)
17 Copy quantity keys• Use to select the desired copy quantity (1 to 99).• Use to make user program entries.
18 Clear key• Press to clear the display, or press during a copy run to
terminate copying.• Press and hold down during standby to display the total
number of copies made to date.
1 2 3 4 5 6 7 8 9 10 11 12 13
14 15 16 17 18
On: Indicates the unit is ready for copying or scanning isbeing performed.
Blinking: The indicator blinks in the following situations:
• When a print job is interrupted.
• When reserving a copy job.
• When toner is being replenished during a copy orprint job.
Power save indicator
Start indicatorONLINE indicator
SCAN indicator
AL-2030/2040CS/2050CS EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 2
ONLINE indicator
The ONLINE key is pressed and on line and off line arechanged.
Power save indicator
SCAN indicator (AL-2040CS only)
*4: Using the SCAN key to begin scanning
Note:
• Scanning is not possible during a copy job.
• If the SCAN ( ) key is pressed during a print job, the scanjob will be stored.
• When scanning an original that has been placed in the SPF,only one original can be placed unless you are using Sharp-desk.
1) Press the SCAN ( ) key.
The unit enters scan mode.
2) Place the original you wish to scan on the document glass/SPF.
3) Press the right copy quantity key to display the number ofthe application that you wish to use for scanning.
The application numbers are initially as follows.
4) Press the start ( ) key.
Scanning will start and the scanned data will be transferredto the application.
B. AL-2050CS
Off: The indicator is off in the following situations:
• During copying or scanning.
• The unit is in the auto power shut-off mode.
• When a misfeed or error has occurred.
On: Indicates the unit is ready for printing or scanning is being performed. (On line)
Blinking: Printing or data is being received from a computer.Off: Copying is being performed. (Off line)
On: Indicates the unit is in a power save mode.Blinking: Indicates that the unit is initializing (when the side
cover is opened and closed or the power turned off and on).
On: The SCAN ( ) key has been pressed and the unit is in scanner mode.
Blinking: A scan job is being executed from the computer, or scan data is stored in the unit’s memory.
Off: The unit is in the copy mode.
Application number
Application launched
SC1 Sharpdesk (Full color) (if installed)
SC2 Sharpdesk (Monochrome) (if installed)
SC3 E-mail (your standard e-mail program in the Windows OS you are using)
SC4 Fax (if a fax program is installed)
SC5 OCR (if an OCR program is installed)
SC6 Microsoft Word (if installed)
1 [MODE SELECT] key / Mode indicatorsPress this key to select the mode. The indicator of the selected mode lights (copy, printer, scanner indicators).
2 DisplayThis shows messages indicating the machine status and any problems that occur, as well as user programs and function setting menus.
3 Numeric keysUse these to enter the number of copies and other numerical settings.
The keys can also be used to select items in function setting menus.
4 [CLEAR] key ( )Use this to clear the set number of copies, as well as cancel a job that is in progress. When a setting menu appears, use this key to move back to the previous menu level.
5 Power save indicatorThis lights up when the power save function is activated.
6 RSPF indicatorThis lights up when an original is placed in the RSPF.
7 Error indicatorThis lights steadily or blinks when a paper misfeed or other error occurs.
8 [TRAY SELECT] key ( )Use to select the paper tray that has the desired paper for copying.
1 2 3 4 5
6 7 8 10 11 1312 14 159 16 17
READY TO COPY. 100% 8.5x11 0
Display
18 19 20 21
AL-2030/2040CS/2050CS EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 3
9 Tray location indicatorIndicates the selected paper tray. The indicator blinks when the tray is out of paper during operation or is not closed properly.
10 [MENU] keyPress this key to select the paper size for copying, to configure a user program or to display the total count.
11 [2-SIDED COPY] keyPress to select the automatic two-sided copying mode.
12 [E-SORT/SP.FUN] keyPress to select the sort function, 2 IN 1 copy function, or margin shift function.
13 [ ] key ( ), [ ] key ( ), [ENTER] keyPress the [ ] key ( ) or [ ] key ( ) to select an item in a function setting menu.
Press the [ENTER] key to enter a selection.
14 [EXPOSURE] keyUse to switch from auto exposure adjustment to text mode or photo mode.
15 [COPY RATIO] keyPress to select an enlargement or reduction ratio.
To select a preset ratio setting, press the [COPY RATIO] key and select the desired preset ratio. To select a ratio that is not preset, press the [COPY RATIO] key, select the preset ratio that is closest to the desired ratio, and then press the [ ] key ( ) or [ ] key ( ) to increase or decrease the ratio in increments of 1%.
16 [CLEAR ALL] key ( )This returns all functions to the default settings. When pressed in a setting menu, this returns the settings and display to the initial state.
17 [START] key ( ) / Ready indicatorThe ready indicator lights up when copying or scanning is possible.
To begin copying, press the [START] key ( ).
The [START] key ( ) is also pressed to return to normal operation from auto power shut-off mode.
18 Shows the current copy ratio.
19 Shows the selected paper size. 20 Shows the number of copies that has been entered with the numeric keys.
21 A checkmark " " appears when the exposure has been changed, or when two-sided copying, sort, 2 IN 1, or margin shift is selected.
AL-2030/2040CS/2050CS EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 4
4. Motors and solenoidsA. AL-2030/2040CS
3
9
2
8
4
1
5
7
10
6
No. Part name Control signal Function / Operation1 Main motor MM Drives the copier.2 Scanner motor MRMT Drives the optical mirror base (scanner unit).3 Toner motor TM Supplies toner.4 Cooling fan motor VFM Cools the optical, fusing section.5 Resist roller solenoid RRS Resist roller rotation control solenoid6 Paper feed solenoid CPFS1 Cassette Paper feed solenoid 17 Multi paper feed solenoid MPFS Multi manual pages feed solenoid8 SPF motor SPFM Drives the single pass feeder9 Duplex motor DMT Devices the duplex paper transport section (AL-2040CS only)
10 Paper feed solenoid CPFS2 Cassette Paper feed solenoid 2 (AL-2040CS only)
AL-2030/2040CS/2050CS EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 5
B. AL-2050CS
12
13
8
1
4
2
5
61011
7
3
9
No. Part name Control signal Function / Operation1 Main motor MM Drives the copier.2 Scanner motor MRMT Drives the optical mirror base (scanner unit).3 Toner motor TM Supplies toner.4 Cooling fan motor VFM Ventilate the fuser section.5 Resist roller solenoid RRS Resist roller rotation control solenoid6 Paper feed solenoid CPFS1 Cassette Paper feed solenoid 17 Multi paper feed solenoid MPFS Multi manual pages feed solenoid8 Drive motor SPMT Drives the RSPF.9 Duplex motor DMT Devices the duplex paper transport section
10 Paper feed solenoid CPFS2 Cassette Paper feed solenoid 211 Shifter motor SFTM Drives the shifter.12 Reverse clutch SRVC Reverses the rotating direction of the roller.13 Paper feed solenoid (RSPF) SPUS Feeds paper.
AL-2030/2040CS/2050CS EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 6
5. Sensors and switchesA. AL-2030/2040CS
(For the AL-2030, the 2nd cassette is not provided.)
1 2
8
9
3
4
10
5
116
7
No. Name Signal Type Function Output1 Scanner unit home position
sensorMHPS Transmission sensor Scanner unit home position detection "H" at home position
2 POD sensor POD Transmission sensor Paper exit detection "H" at paper pass3 PPD2 sensor PPD2 Transmission sensor Paper transport detection 2 "L" at paper pass4 Cassette detection switch CED1 Micro-switch Cassette installation detection "H" at cassette insertion5 PPD1 sensor PPD1 Transmission sensor Paper transport detection 1 "L" at paper pass6 Door switch DSW Micro-switch Door open/close detection
(safety switch for 24V)1 or 0V of 24V at door open
7 Drum reset switch DRST Micro-switch New drum detection switch Instantaneously "H" at insertion of new drum
8 SPF sensor SPID/SD SW
Transmission sensor Paper entry detection
Cover open/close detection
"L" at paper pass
9 SPPD sensor SPPD Transmission sensor Paper transport detection "L" at paper pass10 2nd cassette DSW Micro-switch 2nd cassette door open detection
(AL-2040CS only)1 or 0V of 5V at door open
11 PPD3 sensor PPD3 Transmission sensor Paper transport detection 3 "L" at paper pass
AL-2030/2040CS/2050CS EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 7
B. AL-2050CS
1
3
4
2
8 9
13
12
5
6
10
7 11
No. Name Signal Type Function Output1 Scanner unit home position
sensorMHPS Transmission sensor Scanner unit home position detection "H" at home position
2 POD sensor POD Transmission sensor Paper exit detection "H" at paper pass3 PPD2 sensor PPD2 Transmission sensor Paper transport detection 2 "L" at paper pass4 Cassette detection switch CED1 Micro-switch Cassette installation detection "H" at cassette insertion5 PPD1 sensor PPD1 Transmission sensor Paper transport detection 1 "L" at paper pass6 Door switch DSW Micro-switch Door open/close detection
(safety switch for 24V)1 or 0V of 24V at door open
7 Drum reset switch DRST Micro-switch New drum detection switch Instantaneously "H" at insertion of new drum
8 Paper empty sensor SPID Transmission sensor Paper entry detection "H" paper empty9 Paper exit sensor SRJD Transmission sensor Paper exit detection "H" paper empty
10 2nd cassette DSW Micro-switch 2nd cassette door open detection 1 or 0V of 5V at door open11 PPD3 sensor PPD3 Transmission sensor Paper transport detection 3 "L" at paper pass12 Paper sensor SPPD Transmission sensor Paper transport detection "H" paper empty13 Upper door open/close sensor SCOD Transmission sensor Cover open/close detection "L" open
AL-2030/2040CS/2050CS EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 8
6. PWB unitA. AL-2030/2040CS
2
4
5
8
3
6
7
9
10
1
No. Name Function1 Exposure lamp invertor PWB Exposure lamp (CCFL) control2 Main PWB (MCU) Copier control3 Operation PWB Operation input/display4 High voltage PWB High voltage control5 CCD sensor PWB For image scanning6 LSU motor PWB For polygon motor drive7 TCS PWB For toner sensor control8 LSU PWB For laser control9 NIC PWB Network print control (AL-2040CS only)
10 Power PWB AC power input, DC voltage control
AL-2030/2040CS/2050CS EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 9
B. AL-2050CS
1
5 2
8
6
37
4
10
9
No. Name Function1 Exposure lamp invertor PWB Exposure lamp (CCFL) control2 Main PWB (MCU) Copier control3 Operation PWB Operation input/display4 High voltage PWB High voltage control5 CCD sensor PWB For image scanning6 LSU motor PWB For polygon motor drive7 TCS PWB For toner sensor control8 LSU PWB For laser control9 NIC PWB Network print control
10 Power PWB AC power input, DC voltage control
AL-2030/2040CS/2050CS EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 10
7. Cross sectional viewA. AL-2030/2040CS
3
4
5
8
9
10
11
6
7
121314
1
2
15 16
17
18
No. Part name Function and operation1 Scanner unit Illuminates the original with the copy lamp and passes the reflected light to the lens unit (CCD).2 Exposure lamp Exposure lamp (CCFL) Illuminates original3 LSU (Laser unit) Converts the original image signal into laser beams and writes onto the drum.4 Paper exit roller Roller for paper exit5 Main charger Provides negative charges evenly to the drum surface.6 Heat roller Fuses toner on the paper. (Teflon roller)7 Pressure roller Fuses toner on the paper. (Silicon rubber roller)8 Drum Forms images.9 Transfer unit Transfers images onto the drum.
10 Pickup roller Picks up the manual feed paper. (In multi feed only)11 Manual paper feed tray Tray for manual feed paper12 Manual paper feed roller Transport the paper from the manual paper feed port.13 PS roller unit Takes synchronization between the lead edge and the rear edge of the paper.14 Paper feed roller Picks up a sheet of paper from the cassette.15 Pickup roller Picks up documents.16 Separation roller Separates documents to feed properly.17 PS roller Feeds documents to the scanning section.18 Paper exit roller Discharges documents.
AL-2030/2040CS/2050CS EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 11
B. AL-2050CS
2019
15 16 1718
6
7
8
9
10
11
12
41 2
53
14 13
No. Part name Function and operation1 Scanner unit Illuminates the original with the copy lamp and passes the reflected light to the lens unit (CCD).2 Exposure lamp Exposure lamp (CCFL) Illuminates original3 LSU (Laser unit) Converts the original image signal into laser beams and writes onto the drum.4 Paper exit roller Roller for paper exit5 Main charger Provides negative charges evenly to the drum surface.6 Heat roller Fuses toner on the paper. (Teflon roller)7 Pressure roller Fuses toner on the paper. (Silicon rubber roller)8 Drum Forms images.9 Transfer unit Transfers images onto the drum.
10 Pickup roller Picks up the manual feed paper. (In multi feed only)11 Manual paper feed tray Tray for manual feed paper12 Manual paper feed roller Transport the paper from the manual paper feed port.13 PS roller unit Takes synchronization between the lead edge and the rear edge of the paper.14 Paper feed roller Picks up a sheet of paper from the cassette.15 Pickup roller Picks up documents.16 Separation roller Separates documents to feed properly.17 Upper transport roller Transports of a document.18 Paper exit roller Discharges documents.19 Lower transport roller Transports of a document.20 PS roller Feeds documents to the scanning section.
AL-2030/2040CS/2050CS EXTERNAL VIEWS AND INTERNAL STRUCTURES 4 - 12
[5] UNPACKING AND INSTALLATION
1. Copier installationImproper installation may damage the copier. Please note the fol-lowing during initial installation and whenever the copier is moved.
Caution: If the copier is moved from a cool place to a warm place,condensation may form inside the copier. Operation in thiscondition will cause poor copy quality and malfunctions.Leave the copier at room temperature for at least 2 hoursbefore use.
Do not install your copier in areas that are:
• damp, humid, or very dusty
• exposed to direct sunlight
• poorly ventilated
• subject to extreme temperature or humidity changes, e.g., nearan air conditioner or heater.
The copier should be installed near an accessible power outlet foreasy connection.
Be sure to connect the power cord only to a power outlet that meetsthe specified voltage and current requirements.
Also make certain the outlet is properly grounded.
Be sure to allow the required space around the machine for servic-ing and proper ventilation.
2. Cautions on handlingBe careful in handling the copier as follows to maintain the perfor-mance of this copier.
Do not drop the copier, subject it to shock or strike it against anyobject.
Do not expose the drum cartridge to direct sunlight.
Doing so will damage the surface (green portion) of the drum car-tridge, causing poor print quality.
Store spare supplies such as drum cartridges and TD cartridges ina dark place without removing from the package before use.
If they are exposed to direct sunlight, poor print quality may result.
Do not touch the surface (green portion) of the drum cartridge.
Doing so will damage the surface of the cartridge, causing poorprint quality.
3. Checking packed components and accessories
Open the carton and check if the following components and acces-sories are included.
8" (20cm)8" (20cm)
4"(10cm)
4"(10cm)
Operation manual
Software CD-ROM
TD cartridge
Drum cartridge(installed in unit)
AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 1
4. UnpackingBe sure to hold the handles on both sides of the unit to unpack theunit and carry it to the installation location.
5. Removing protective packing materials
1) Remove all pieces of tape shown in the illustration below. Thenopen the SPF/RSPF and remove protective materials. Afterthat, take out the bag containing the TD cartridge.
2) Release the scan head locking switch.
The scan head locking switch is under the document glass.
If the switch is locked ( ), the unit will not operate. Unlock theswitch ( ) as shown below.
To lock the scan head locking switch, hold up the catch in illus-tration (A) and turn the center knob counter-clockwise 90degrees until you hear a click.
6. Installing the TD cartridge1) Open the multi-bypass tray, and then open the side cover.
2) Remove the CAUTION tape from the front cover and removethe two protective pins from the fusing unit by pulling the stringsupward one at a time.
3) Push gently on both sides of the front cover to open the cover.
4) Remove the TD cartridge from the bag. Remove the protectivepaper. Hold the cartridge on both sides and shake it horizontallyfour or five times. Hold the tab of the protective cover and pullthe tab to your side to remove the cover.
5) Gently insert the TD cartridge until it locks in place while push-ing the lock release button.
6) Close the front cover and then the side cover by pressing theround projections near the side cover open button.
Caution: When closing the covers, be sure to close the front coversecurely and then close the side cover. If the covers areclosed in the wrong order, the covers may be damaged.
AL-2030
AL-2040CS/2050CS
(A)
Lock Unlock
Grasp here and turn in the direction of the arrow.
CAUTION tape
Protective pins
4 or 5 times
Lock release button
AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 2
7. Loading paper1) Raise the handle of the paper tray and pull the paper tray out
until it stops.
2) Remove the pressure plate lock. Rotate the pressure plate lockin the direction of the arrow to remove it while pressing downthe pressure plate of the paper tray.
3) Store the pressure plate lock which has been removed in step2). To store the pressure plate lock, rotate the lock to fix it on therelevant location.
4) Adjust the paper guides on the paper tray to the copy paperwidth and length. Squeeze the lever of paper guide (A) andslide the guide to match with the width of the paper. Move paperguide (B) to the appropriate slot as marked on the tray.
5) Fan the paper and insert it into the tray. Make sure the edges gounder the corner hooks.
Note: Do not load paper above the maximum height line ( ).Exceeding the line will cause a paper misfeed.
6) Gently push the paper tray back into the unit.
8. Power to copierEnsure that the power switch of the unit is in the OFF position. Plugthe other end of the power cord into the nearest outlet. Turn thepower switch on the left side of the unit to the "ON" position. Thestart ( ) indicator will light up and other indicators which show theinitial settings of the operation panel will also light up to indicate theready condition.
9. SoftwareThe CD-ROM that accompanies the machine contains the followingsoftware:
Printer driver (AL-2030)The printer driver enables you to use the printer function of themachine.
The printer driver includes the Print Status Window. This is a utilitythat monitors the machine and informs you of the printing status,the name of the document currently being printed, and error mes-sages.
Please note that the printing over a network connection is not possi-ble.
MFP driver (AL-2040CS/2050CS)Printer driver
The printer driver enables you to use the printer function of themachine.
The printer driver includes the Print Status Window. This is a utilitythat monitors the machine and informs you of the printing status,the name of the document currently being printed, and error mes-sages.
Please note that the Print Status Window does not operate whenthe machine is used as a network printer.
Scanner driver*
The scanner driver allows you to use the scanning function of themachine with TWAIN-compliant and WIA-compliant applications.
Sharpdesk* (AL-2040CS/2050CS)Sharpdesk is an integrated software environment that makes iteasy to manage documents and image files, and launch applica-tions.
Button Manager* (AL-2040CS/2050CS)Button Manager allows you to use the scanner menus on themachine to scan a document.
*: The scanning feature can only be used with computers that areconnected to the machine by a USB cable. If you are connectedto the machine by a LAN connection, only the printer function canbe used.
A. Before installation
Hardware and software requirementsCheck the following hardware and software requirements in order toinstall the software.
Pressure plate lock
Paper guide (B)Paper guide (A)
Computer type
IBM PC/AT or compatible computer equipped with a USB 2.0*1/1.1*2 or 10Base-T LAN interface
Operating system*3 *4
Windows 98, Windows Me, Windows 2000 Professional*5, Windows XP*5, Windows Vista*5
Display 800 x 600 dots (SVGA) display with 256 colors (or better) (AL-2030/2040CS)
1024 x 768 dots resolution and 16-bit color or higher is recommended. (AL-2050CS)
Hard disk free space
150 MB or more
Other hardware requirements
An environment on which any of the operating systems listed above can fully operate
AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 3
*1: The machine’s USB connector will transfer data at the speedspecified by the USB 2.0 (Hi-Speed) only if the Microsoft USB2.0 driver is installed in the computer.
*2: Compatible with Windows 98, Windows Me, Windows 2000Professional, Windows XP or Windows Vista preinstalled modelstandardly equipped with a USB port.
*3: Printing is not available in MS-DOS mode.
*4: The machine does not support printing from a Macintosh envi-ronment.
*5: Administrator’s rights are required to install the software usingthe installer.
Installation environment and usable softwareThe following table shows the drivers and software that can beinstalled for each version of Windows and interface connectionmethod.
*1: By running change
*2: The printer driver that is installed will vary depending on thetype of connection between the machine and your computer.
*3: Although it is possible to install Button Manager and Sharpdeskon Windows 98/Me/2000/XP/Vista, neither Button Manager northe scanner function of Sharpdesk can actually be used. (AL-2030/2040CS)
B. Installing the softwareNote:
• If you need to use a different connection method after installingthe software using a USB or network connection, you must firstuninstall the software and then install it using the new connectionmethod.
• In the following explanations it is assumed that the mouse is con-figured for right hand operation.
• The scanner function only works when using a USB cable.
• If an error message appears, follow the instructions on the screento solve the problem. After the problem is solved, the installationprocedure will continue. Depending on the problem, you mayhave to click the "Cancel" button to exit the installer. In this case,reinstall the software from the beginning after solving the prob-lem.
(1) Using the machine with a USB connection1) The USB cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. Ifthis happens, click the "Cancel" button to close the window anddisconnect the cable.
Note: The cable will be connected in step 13).
2) Insert the CD-ROM into your computer’s CD-ROM drive.
3) Click the "start" button, click "My Computer", and then double-click the CD-ROM icon.
• In Windows Vista, click the "Start" button, click "Computer",and then double-click the CD-ROM icon.
• In Windows 98/Me/2000, double-click "My Computer", andthen double-click the CD-ROM icon.
4) Double-click the "setup" icon.
In Windows Vista, if a message screen appears asking you forconfirmation, click "Allow".
5) The "SOFTWARE LICENSE" window will appear. Make surethat you understand the contents of the software license, andthen click the "Yes" button.
Note: You can show the "SOFTWARE LICENSE" in a differentlanguage by selecting the desired language from thelanguage menu. To install the software in the selectedlanguage, continue the installation with that languageselected.
6) Read the "Readme First" in the "Welcome" window and thenclick the "Next" button.
(AL-2030)
7) To install all of the software, click the "Standard" button and goto step 12).
To install particular packages, click the "Custom" button and goto next step.
8) Click the "Printer Driver" button.
Click the "Display Readme" button to show information on pack-ages that are selected.
9) Select "Connected to this computer" and click the "Next" button.
Follow the on-screen instructions.
When "The installation of the SHARP software is complete."appears, click the "OK" button and go to step 12).
Caution:
• If you are using Windows Vista and a security warning win-dow appears, be sure to click "Install this driver software any-way".
• If you are running Windows 2000/XP and a warning messageappears regarding the Windows logo test or digital signature,be sure to click "Continue Anyway" or "Yes".
CableOperating
systemPrinter driver
Scanner driver
Button Manager
Sharpdesk
USB Windows 98/Me/2000/XP/Vista*1
Available*2 Available
LAN Windows 98/Me/2000/XP/Vista*1
Not Available*3
AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 4
(AL-2040CS/2050CS)
7) To install all of the software, click the "Standard" button and goto step 12).
To install particular packages, click the "Custom" button and goto next step.
8) Click the "MFP Driver" button.
Click the "Display Readme" button to show information on pack-ages that are selected.
9) The files required for installation of the MFP driver are copied.
Follow the on-screen instructions.
When "The installation of the SHARP software is complete."appears, click the "OK" button.
Caution:
• If you are using Windows Vista and a security warning win-dow appears, be sure to click "Install this driver software any-way".
• If you are running Windows 2000/XP and a warning messageappears regarding the Windows logo test or digital signature,be sure to click "Continue Anyway" or "Yes".
10) You will return to the window of step 8). If you wish to install But-ton Manager or Sharpdesk, click the "Utility Software" button.
If you do not wish to install the Utility Software, click the "Close"button and go to step 12).
Note: After the installation, a message prompting you to restartyour computer may appear. In this case, click the "Yes"button to restart your computer.
Installing the Utility Software
11) Click the "Button Manager" or the "Sharpdesk" button.
Click the "Display Readme" button to show information on pack-ages that are selected.
Follow the on-screen instructions.
Caution: In Windows 98/Me/2000, if the following screenappears, click the "Skip" button or the "Continue" but-ton as appropriate to continue the Sharpdesk installa-tion.
If "Skip" is selected, the Sharpdesk installation willcontinue without installing Sharpdesk Imaging.
If "Continue" is selected, Sharpdesk Imaging will beinstalled. If Imaging for Windows is installed on yourcomputer, Sharpdesk Imaging will overwrite Imagingfor Windows.
12) When installing is finished, click the "Close" button.
Caution:
• If you are using Windows Vista and a security warning win-dow appears, be sure to click "Install this driver software any-way".
• If you are running Windows 2000/XP and a warning messageappears regarding the Windows logo test or digital signature,be sure to click "Continue Anyway" or "Yes".
A message will appear instructing you to connect the machineto your computer. Click the "OK" button.
Note: After the installation, a message prompting you to restartyour computer may appear. In this case, click the "Yes"button to restart your computer.
13) Make sure that the power of the machine is turned on, and thenconnect the USB cable (p.5-6).
Windows will detect the machine and a Plug and Play screenwill appear.
14) Follow the instructions in the plug and play window to install thedriver.
Follow the on-screen instructions.
Caution:
• If you are using Windows Vista and a security warning win-dow appears, be sure to click "Install this driver software any-way".
• If you are running Windows 2000/XP and a warning messageappears regarding the Windows logo test or digital signature,be sure to click "Continue Anyway" or "Yes".
AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 5
Note: A "USB 2.0 Composite Device" installation window mayappear prior to this procedure. In this case, follow theinstructions in the window to install the USB 2.0Composite Device.
This completes the installation of the software.
• If you installed Button Manager, set up Button Manager asexplained in "Setting up the Button Manager" (p.5-9).
• If you installed Sharpdesk, the Sharpdesk setup screen willappear. Follow the instructions in the screen to set up Sharpdesk.
(2) Connecting a USB cableFollow the procedure below to connect the machine to your com-puter.
A USB cable for connecting the machine to your computer is notincluded with the machine. Please purchase the appropriate cablefor your computer.
Caution:
• USB is available with a PC/AT compatible computer that was orig-inally equipped with USB and had Windows 98, Windows Me,Windows 2000 Professional, Windows XP Professional or Win-dows XP Home Edition preinstalled.
• Do not connect the USB cable before installing the printer driver.The USB cable should be connected during installation of theprinter driver.
1) Insert the cable into the USB connector on the machine.
2) Insert the other end of the cable into your computer’s USB port.
(3) Using the machine as a network printer (AL-2040CS/2050CS only)
Note:
• Interface cables for connecting the machine to your computer arenot included with the machine. Please purchase the appropriatecable for your computer.
• If you intend to use the machine as a scanner, it must be con-nected to your computer with a USB interface cable. The scannerfunction cannot be used if the machine is connected with a LANcable.
1) Insert the LAN cable into the LAN connector on the machine.
Use a network cable that is shielded.
2) Turn on the machine.
3) Insert the CD-ROM into your computer's CD-ROM drive.
4) Click the "start" button, click "My Computer", and then double-click the CD-ROM icon.
• In Windows Vista, click the "Start" button, click "Computer",and then double-click the CD-ROM icon.
• In Windows 98/Me/2000, double-click "My Computer", andthen double-click the CD-ROM icon.
5) Double-click the "setup" icon.
In Windows Vista, if a message screen appears asking you forconfirmation, click "Allow".
6) The "SOFTWARE LICENSE" window will appear. Make surethat you understand the contents of the software license, andthen click the "Yes" button.
Note: You can show the "SOFTWARE LICENSE" in a differentlanguage by selecting the desired language from thelanguage menu. To install the software in the selectedlanguage, continue the installation with that languageselected.
7) Read the "Readme First" in the "Welcome" window and thenclick the "Next" button.
Note: To set the IP address of the machine, follow the stepsbelow. If the machine is already connected to thenetwork and its IP address has been set, go to "LPR(TCP/IP) direct printing" (p.5-7).
Set the IP Address
This setting is only required once when using the machine on a net-work.
8) Click the "Set the IP Address" button.
9) The printer or printers connected to the network will bedetected.
Click the printer to be configured (the machine) and click the"Next" button.
Note:
• The "Ethernet Address" is indicated on the left side of themachine near the LAN connector.
• If the machine can not be recognized, enter the EthernetAddress and click the "Initialize" button to initialize the IPaddress. Follow the on-screen instructions to click the "OK"button and then the "Search" button. If the machine is still notrecognized, disable your computer’s firewall and then repeatthe installation from the beginning.
(AL-2030/2040CS) (AL-2050CS)
AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 6
10) Enter the IP address, subnet mask, and default gateway.
The settings in the above window are examples.
Be sure to ask your network administrator for the correct IPaddress, subnet mask, and default gateway to be entered.
Note: When "Get IP Address Automatically" is selected, the IPaddress may at times change automatically. This willprevent printing. In this event, select "Assign IP Address"and enter the IP address.
11) Click the "Next" button.
12) Click the "Yes" button in the confirmation dialog box thatappears.
Go to "LPR (TCP/IP) direct printing" step 11).
LPR (TCP/IP) direct printing
After step 1) - 7) on page 5-6.
8) Click the "Printer Driver" button.
If you have not set the IP Address, click the "Set the IPAddress" button first and go to step 8).
9) Read the message in the "Welcome" window and then click the"Next" button.
10) Select "LPR Direct Print" and click the "Next" button.
11) The printer or printers connected to the network will bedetected.
Click the printer to be configured (the machine) and click the"Next" button.
Note: If the machine’s IP address cannot be found, make surethe machine is powered on, make sure the network cableis connected correctly, and then click the "Search"button.
12) In the window for setting the destination print port name, makesure that ":lp" appears at the end of the IP address and click the"Next" button.
Note: Any name can be entered in "Printer Port Name"(maximum of 38 characters).
13) A window appears to let you check your entries. Make sure thatthe entries are correct and then click the "Finish" button.
If any of the entries are incorrect, click the "Back" button toreturn to the appropriate window and correct the entry.
14) Select the port you want to use with the machine, and click the"Next" button.
15) Select whether or not you wish the printer to be your defaultprinter and click the "Next" button.
Follow the on-screen instructions.
Caution:
• If you are using Windows Vista and a security warning win-dow appears, be sure to click "Install this driver software any-way".
• If you are running Windows 2000/XP and a warning messageappears regarding the Windows logo test or digital signature,be sure to click "Continue Anyway" or "Yes".
16) When "The installation of the SHARP software is complete."appears, click the "OK" button.
17) When the "Finish" screen appears, click the "Close" button.
Note: After the installation, a message prompting you to restartyour computer may appear. In this case, click the "Yes"button to restart your computer.
This completes the installation of the software.
AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 7
(4) Using the machine as a shared printer (AL-2030)If the machine will be used as a shared printer on a network, followthese steps to install the printer driver in the client computer.
Note: To configure the appropriate settings in the print server, seethe operation manual or help file of your operating system.
1) Perform steps 2) through 6) in "Using the machine with a USBconnection" (p.5-4).
2) Click the "Custom" button.
3) Click the "Printer Driver" button.
Click the "Display Readme" button to show information on pack-ages that are selected.
4) Select "Connected via the network" and click the "Next" button.
5) Click the "Add Network Port" button.
6) Select the network printer that is shared and click the "OK" but-ton.
Ask your network administrator for the server name and printername of the machine on the network.
7) In the printer port selection window, verify the network printerthat is shared and whether the machine is to be used as thedefault printer, make the selections and click the "Next" button.
Follow the on-screen instructions.
Caution: If you are running Windows 2000/XP and a warningmessage appears regarding the Windows logo test ordigital signature, be sure to click "Continue Anyway"or "Yes".
8) You will return to the window of step 3). Click the "Close" button.
Note: After the installation, a message prompting you to restartyour computer may appear. In this case, click the "Yes"button to restart your computer.
This completes the installation of the software.
(5) Sharing the printer using windows networking (AL-2040CS/2050CS)
If the machine will be used as a shared printer on a network, followthese steps to install the printer driver in the client computer.
Note: To configure the appropriate settings in the print server, seethe operation manual or help file of your operating system.
1) Perform steps 3) through 7) in "Using the machine as a networkprinter" (p.5-6).
2) Click the "Printer Driver" button.
3) Select "Shared Printer" and click the "Next" button.
AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 8
4) For the port to be used, select the machine set as a sharedprinter, and click the "Next" button.
You can also click the "Add Network Port" button and select theprinter to be shared (the machine) by browsing the network inthe window that appears.
Note: If the shared printer does not appear in the list, check thesettings in the printer server.
5) Follow the on-screen instructions.
6) When the "Finish" screen appears, click the "Close" button.
Note: After the installation, a message prompting you to restartyour computer may appear. In this case, click the "Yes"button to restart your computer.
This completes the installation of the software.
C. Setting up Button Manager (AL-2040CS/2050CS only)
Button Manager is a software program that works with the scannerdriver to enable scanning from the machine.
To scan using the machine, Button Manager must be linked with thescan menu on the machine. Follow the steps below to link ButtonManager to scanner events.
(1) Windows XP/Vista1) Click the "start" button, click "Control Panel", click "Printers and
Other Hardware", and then click "Scanners and Cameras".
In Windows Vista, click the "Start" button, select "Control Panel"and click "Hardware and Sound", and then click "Scanners andCameras".
2) Click the "SHARP AL-XXXX" icon and select "Properties" fromthe "File" menu.
In Windows Vista, select "Properties" from the "Organize"menu.
3) In the "Properties" screen, click the "Events" tab.
4) Select "SC1:" from the "Select an event" pull-down menu.
5) Select "Start this program" and then select "Sharp Button Man-ager O" from the pull-down menu.
6) Click the "Apply" button.
7) Repeat Steps 4) through 6) to link Button Manager to "SC2:"through "SC6:".
Select "SC2:" from the "Select an event" pull-down menu.Select "Start this program", select "Sharp Button Manager O"from the pull-down menu, and then click the "Apply" button. Dothe same for each ScanMenu through "SC6:".
When the settings have been completed, click the "OK" buttonto close the screen.
Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menu 1 through 6 can bechanged with the setting window of Button Manager.
For the factory default settings of the scan menu and the proce-dures for configuring Button Manager settings, see "ButtonManager Settings" in the Online Manual.
(2) Windows 98/Me/20001) Click the "Start" button, select "Settings", and then click "Con-
trol Panel".
2) Double-click the "Scanners and Cameras" icon.
Note: If the "Scanners and Cameras" icon does not appear inWindows Me, click "view all Control Panel options".
3) Select "SHARP AL-XXXX" and click the "Properties" button.
In Windows Me, right click "SHARP AL-XXXX" and click "Prop-erties" in the pop-up menu.
4) In the "Properties" screen, click the "Events" tab.
5) Select "SC1:" from the "Scanner events" pull-down menu.
AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 9
6) Select "Sharp Button Manager O" in "Send to this application".
Note: If other applications are shown, deselect the checkboxesfor the other applications and leave only the ButtonManager checkbox selected.
7) Click the "Apply" button.
8) Repeat Steps 5) through 7) to link Button Manager to "SC2:"through "SC6:".
Select "SC2:" from the "Scanner events" pull-down menu.Select "Sharp Button Manager O" in "Send to this application"and click the "Apply" button.
Do the same for each ScanMenu through "SC6:".
When the settings have been completed, click the "OK" buttonto close the screen.
Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menus 1 through 6 can bechanged with the setting window of Button Manager.
For the factory default settings of the scan menu and the proce-dures for configuring Button Manager settings, see "ButtonManager Settings" in the Online Manual.
10. InterfaceA. USB
ConnectorType-B connector
CableShielded twisted pair cable
(2 m (6 feet) Max.: high-speed transmission equivalent)
Pin configurationThe pin numbers and signal names are listed in the following table.
B. RJ45RJ-45 connector pin arrangement
11. MovingMoving instructionsWhen moving the unit, follow the procedure below.
Note: When moving this unit, be sure to remove the TD cartridge inadvance.
1) Turn the power switch off and remove the power cord from theoutlet.
2) Open the side cover and front cover, in that order. Remove theTD cartridge and close the front cover and side cover, in thatorder.
To open and close the side cover and front cover, and to removethe TD cartridge.
3) Raise the handle of the paper tray and pull the paper tray outuntil it stops.
4) Push the center of the pressure plate down until it locks in placeand lock the plate using the pressure plate lock which has beenstored in the front of the paper tray.
5) Push the paper tray back into the unit.
6) Lock the scan head locking switch.
Note: When shipping the unit, the scan head locking switch mustbe locked to prevent shipping damage.
7) Close the multi-bypass tray and the paper output tray extension,and attach the packing materials and tape which were removedduring installation of the unit.
8) Pack the unit into the carton.
12. Scanner moisture-proof kitIf the machine is installed in a highly humid environment, you canalleviate dew condensation inside the scanner by installing thescanner moisture-proof kit described below.
A. ComponentsScanner moisture-proof kit (DKIT-0016QSZZ)
B. Precautions at installationClean the position where each cushion/mylar is attached withindustrial alcohol before the work.
Pin No. Signal name1 +5V2 -DATA3 +DATA4 GND
12
3 4
Pin No. Signal name LAN adapter RJ-45 connector1 TD+ Send output +
2 TD– Send output -
3 RD+ Receive input +
6 RD– Receive input -
4, 5, 7, 8 Not used. Not used.
Name Part code Qty
1 Scanner condensation prevention mylar
PSHEZ0493QSZZ 3
2 Optical right hole mylar B PSHEZ0469QSZZ 2
3 Scanner motor metal plate cushion
PMLT-0106QSZZ 2
4 Scanner upper surface cushion PMLT-0105QSZZ 1
5 Scanner motor lower mylar PSHEP0600QSZZ 16 Scanner UPG mylar J3 PSHEP0599QSZZ 1
7 Fan housing cushion PMLT-0108QSZ1 1
1 8
AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 10
C. Attachment methodTurn the main switch to the "OFF" position and remove the powerplug from the outlet.
1) Detach the RSPF.
Detach the RSPF from the copier and softly place it on top ofthe original table as shown below.
2) Remove the rear cabinet.
<1> Unscrew the screw and remove the rear cabinetshielding plate. (Save the screw.)
<2> Unscrew three screws and remove the rear cabinet. (Savethe screws.)
<3> Disconnect the connector of the RSPF, and remove theRSPF from the machine.
3) Remove the rear cover for the document glass.
<1> Remove the two screws and then remove the right glassholder.
<2> Slide the rear cover for the document glass to remove it.
<3> Remove the table glass.
4) Attach the Scanner condensation prevention mylar at the 3positions on the rear side of the main unit as described below.
Note: The hole should be covered with the mylar.
Align the edge of the mylar to the R part (the yellow line in thediagram below) so that the hole of the metal plate is covered asmuch as possible.
Align the edge of the mylar to the R part (the yellow line in thediagram below) so that the hole of the metal plate is covered asmuch as possible.
Attach along the edge of the projection (the yellow line in thediagram below).
1
2
1
23
AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 11
5) Attach the Optical right hole mylar B at the 2 positions shown inthe diagrams below which are at the top of the rear side of themain unit.
Note: The holes should be covered with the mylar.
Attach along the edge of the cushion (the yellow line in the dia-gram below).
Align with the inside line of the bent part (the yellow line in thediagram below).
Align with the raised part (the yellow line in the diagram below).
Match the center of the mylar (in the horizontal direction) to thecenter of the raised part.
6) Attach the Scanner motor metal plate cushion at 1 position onthe attachment plate of the motor on the rear side of the mainunit.
Note: The hole on the top of the motor unit should be coveredwith the mylar.
Align the edge of the metal plate and the edge of the cushion(the yellow line in the diagram below).
7) Attach the Scanner upper surface cushion on the top and therear side at the rear side of the main unit.
Align the cushion with the side of the raised part (the yellow linein the diagram below).
Bend the part which is sticking out to the rear side of the scan-ner and attach to the surface.
Press the cushion at the steps shown in the diagram so thatthere will be no gap.
Press the cushion to make sure all the holes are covered.
Stick the excessive part on the side.
Stick the excessive part on the side.
Press and attach the cushion aligning it to the metal plate so
that there will be no gap between them.
20mm - 25mm
Do not cover this hole. Align the edge of the cushion with
the edge of the metal plate.
AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 12
8) Bend the edge of the Scanner motor lower mylar and sticktogether.
9) Attach the Scanner motor lower mylar at 1 position under themotor attachment plate on the rear side of the main unit.
Note: The mylar should cover the hole under the motor unit.
Attach matching the hole (the yellow mark in the diagram) andalong with the side edge (the yellow arrow in the diagram).
Disconnect the motor harness from the connector and take offthe snap band from the hole.
Press the mylar with a sharp-pointed stick or something so thatit is stuck correctly.
10) Attach the Scanner motor metal plate cushion covering the bot-tom part of the Scanner motor lower mylar.
Note: The hole under the motor unit should be covered.
Attach the cushion to cover the gap between the mylar and themetal plate (the yellow mark).
Press the cushion with a sharp-pointed stick or something to fillthe gap between the mylar and the metal plate.
11) Attach the motor connector and the snap band to the originalposition.
Stick together. Stick together.
Stick the lower part of the cushion to the mylar, too.
AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 13
12) Attach the Scanner UPG mylar J3 to cover the hole on the rightside of inside of the scanner.
Note: The mylar should cover the hole shown by the arrow inthe diagram.
Attach along with the bent part of the metal plate and align theedge of the mylar with the line shown in the diagram (the yellowline in the diagram).
13) Attach the Fan housing cushion to the cooling fan at the posi-tion shown in the diagram below.
Cover the top and the right side of the fan housing when yousee the fan housing from the backside of the machine.
Note: Please make sure the double-sided tape is not exposedwhere the cushion is sticking out from the edge of the fanhousing.
Attach the cushion leaving 3 - 7mm from the edge so that thegap between the Fan housing cushion and the filter of the rearcabinet is filled for sure.
14) Attach the parts removed in the items 1), 2), and 3).
A
View from
the arrow A
Back side
Attach the cushion leaving 3 - 7mm
from the edge.
Reference position
3 - 7mm
AL-2030/2040CS/2050CS UNPACKING AND INSTALLATION 5 - 14
[6] COPY PROCESS
1. Functional diagram
(Basic operation cycle)
(20 microns thick)
Aluminum drum
Pigment layer (0.2to 0.3 microns thick)
An OPC drum is used for the photoconductor.(Structure of the OPC drum layers)
OPC layer
Main charger
Laser beam
MG roller
Cleaning blade
Drum
Transfer unit
Resist roller
ExposureMain high voltage unit
Saw tooth Charge
DrumCleaning
Cleaning blade
Waste toner box
Paper release Fusing Separation
Heat roller
Heater lamp
Transfer
Transfer charger
Transfer highvoltage unit
Developing
Toner
Developer
Print process
Paper transport route
Semiconductor laser
Manual feed
PS roller
Focus correction lens
Electrode
Synchronizationwith drum
Cassettepaper feed
To facedown tray
AL-2030/2040CS/2050CS COPY PROCESS 6 - 1
2. Outline of print processThis printer is a non-impact printer that uses a semiconductorlaser and electrostatic print process. This printer uses an OPC(Organic Photo Conductor) for its photoconductive material.
First, voltage from the main corona unit charges the drum surfaceand a latent image is formed on the drum surface using a laserbeam. This latent image forms a visible image on the drum surfacewhen toner is applied. The toner image is then transferred onto theprint paper by the transfer corona and fused on the print paper inthe fusing section with a combination of heat and pressure.
Step-1: Charge
Step-2: Exposure
∗ Latent image is formed on the drum.
Step-3: DevelopingLatent image formed on the drum is then changed intovisible image with toner.
Step-4: TransferThe visible image (toner image) on the drum is transferredonto the print paper.
Step-5: CleaningResidual toner on the drum surface is removed and col-lected by the cleaning blade.
Step-6: Optical dischargeResidual charge on the drum surface is removed, bysemiconductor laser beam.
3. Actual print processStep-1: DC charge
A uniform negative charge is applied over the OPC drum surfaceby the main charging unit. Stable potential is maintained by meansof the Scorotron charger.
Positive charges are generated in the aluminum layer.
Step-2: Exposure (laser beam, lens)
A Laser beam is generated from the semiconductor laser and con-trolled by the print pattern signal. The laser writes onto the OPCdrum surface through the polygon mirrors and lens. The resis-tance of the OPC layer decreases for an area exposed by the laserbeam (corresponding to the print pattern signal). The beam neu-tralizes the negative charge. An electrostatic latent image isformed on the drum surface.
AboutDC5.5KV
( 580V/ 400V)
OPC layerPigmentlayerAluminumdrum
OPC layerPigmentlayerAluminumlayer
Drum surface chargeafter the exposure
Non-image area Image area
Semiconductor laser
Exposure(semiconductor laser)
AL-2030/2040CS/2050CS COPY PROCESS 6 - 2
Step-3: Developing (DC bias)
A bias potential is applied to the MG roller in the two componentmagnetic brush developing method, and the toner is charged nega-tive through friction with the carrier.
Non-image area of the drum surface charged with negative poten-tial repel the toner, whereas the laser exposed portions where nonegative charges exist, attract the toner. As a result, a visibleimage appears on the drum surface.
Toner is attracted over the shadowed area because of the develop-ing bias.
Step-4: Transfer
The visible image on the drum surface is transferred onto the printpaper by applying a positive charge from the transfer corona to thebackside of the print paper.
Step-5: Separation
Since the print paper is charged positively by the transfer corona, itis discharged by the separation corona. The separation corona isconnected to ground.
Step-6: Cleaning
Toner remaining on the drum is removed and collected by thecleaning blade. It is transported to the waste toner collecting sec-tion in the cleaning unit by the waste toner transport roller.
S
N
N
:Carrier (Magnetized particle):Toner (Charge negative by friction)(N) (S) Permanent magnet
(provided in three locations)
MG roller
DC400V 8V
About DC 5.2kV
AL-2030/2040CS/2050CS COPY PROCESS 6 - 3
Step-7: Optical discharge (Semiconductor laser)
Before the drum rotation is stopped, the semiconductor laser isradiated onto the drum to reduce the electrical resistance in theOPC layer and eliminate residual charge, providing a uniform stateto the drum surface for the next page to be printed.
When the electrical resistance is reduced, positive charges on thealuminum layer are moved and neutralized with negative chargeson the OPC layer.
Charge by the Scorotron charger
Function
The Scorotron charger functions to maintain uniform surfacepotential on the drum at all times, It control the surface potentialregardless of the charge characteristics of the photoconductor.
Basic function
A screen grid is placed between the saw tooth and the photocon-ductor. A stable voltage is added to the screen grid to maintain thecorona current on the photoconductor.
As the photoconductor is charged by the saw tooth from the maincorona unit, the surface potential increases. This increases thecurrent flowing through the screen grid. When the photoconductorpotential nears the grid potential, the current turns to flow to thegrid so that the photoconductor potential can be maintained at astable level.
Process controlling
Function
The print pattern signal is converted into an invisible image by thesemiconductor laser using negative to positive (reversible) devel-oping method. Therefore, if the developing bias is added beforethe drum is charged, toner is attracted onto the drum. If the devel-oping bias is not added when the drum is charged, the carrier isattracted to the drum because of the strong electrostatic force ofthe drum.
To avoid this, the process is controlled by adjusting the drumpotential and the grid potential of the Scorotron charger.
Basic function
Voltage added to the screen grid can be selected, high and low. Tomake it easily understood, the figure below shows voltage transi-tion at the developer unit.
Start1) Because the grid potential is at a low level, the drum potential
is at about -400V. (Carrier may not be attracted though the car-rier is pulled towards the drum by the electrostatic force of -400V.
2) Developing bias (-400V) is applied when the photoconductorpotential is switched from LOW to HIGH.
3) Once developing bias (-400V) is applied and the photo conduc-tor potential rises to HIGH, toner will not be attracted to thedrum.
StopThe reverse sequence takes place.
Retaining developing bias at an abnormal occurrence
Function
The developing bias will be lost if the power supply was removedduring print process. In this event, the drum potential slightlyabates and the carrier makes deposits on the drum because ofstrong static power. To prevent this, the machine incorporates afunction to retain the developing bias for a certain period anddecrease the voltage gradually against possible power loss.
Basic function
Normally, the developing bias voltage is retained for a certain timebefore the drum comes to a complete stop if the machine shouldstop before completing the normal print cycle. The developing biascan be added before resuming the operation after an abnormalinterruption. Therefore, carrier will not make a deposit on the drumsurface.
Semiconductor laser
0START STOP
Print potential
Toner attractpotential
2)
3)
1) Low
4) High Drum potential
Developing bias
Time
AL-2030/2040CS/2050CS COPY PROCESS 6 - 4
[7] OPERATIONAL DESCRIPTIONS
1. Outline of operationThe outline of operation is described referring to the basic configuration.
(Basic configuration)
(Outline of copy operation)Setting conditions
1) Set copy conditions such as the copy quantity and the copydensity with the operation section, and press the Start key. Theinformation on copy conditions is sent to the MCU.
Image scanning
2) When the Start key is pressed, the scanner section starts scan-ning of images. The light from the copy lamp is reflected by the document andpassed through the lens to the CCD.
Photo signal/Electric signal conversion
3) The image is converted into electrical signals by the CCD circuitand passed to the MCU.
Image process
4) The document image signal sent from the CCD circuit is pro-cessed under the revised conditions and sent to the LSU (laserunit) as print data.
Electric signal/Photo signal (laser beam) conversion
5) The LSU emits laser beams according to the print data.(Electrical signals are converted into photo signals.)
6) The laser beams are radiated through the polygon mirror andvarious lenses to the OPC drum.
Printing
7) Electrostatic latent images are formed on the OPC drumaccording to the laser beams, and the latent images are devel-oped to be visible images (toner images).
8) Meanwhile the paper is fed to the image transfer section in syn-chronization with the image lead edge.
9) After the transfer of toner images onto the paper, the tonerimages are fused to the paper by the fusing section. The copiedpaper is discharged onto the exit tray.
(Outline of printer operation)The print data sent from the PC are passed through the NIC PWB(in case of network connection) and the MCU to the LSU. The pro-cedures after that are the same as above 5) and later.
(Outline of scanner operation)The scan data are passed through the MCU to the PC accordingto the conditions requested by the operations with the operationpanel.
Operationsection
Scanner section
CCD
MCU (Main control/image process section)
USB PC
Laser beamPaper exit
Fusing section
Paper transport section
Manual paperfeed section
Cassette paperfeed section
Printer section
LSU (Laser unit)Laser diode, Polygon mirror lens
Process section
NIC PWB(AL-2040CS/
2050CS)
Network(print only) PC
AL-2030/2040CS/2050CS OPERATIONAL DESCRIPTIONS 7 - 1
2. Scanner sectionA. Scanner unitThe scanner unit in the digital copier scans images.
It is composed of the optical unit and the drive unit. The optical unitperforms scanning in the main scan direction with the light receivingelements (color CCD). The drive unit performs scanning in the subscanning direction by moving the optical unit.
B. Optical systemTwo white lamps are used as the light source.
Light radiated from the light source is applied to the document onthe document table. The reflected light from the document isreflected 4 times by No. 1 - No. 3 mirrors and passed through thereduction lens to form images on the light-receiving surface of 3-lineCCD.
The light-receiving surface of the color CCD is provided with 3 linescanning sections for RGB. Separate images scanned in each colorsection are overlapped to complete color scanning. (When PCscanning)
The resolution is 600dpi.
When copying, only the green component is used to print with theprinter.
The color component for printing can be switched to red or blue bythe service simulation.
(Spectrum characteristics of the lamp)
(Spectrum characteristics of the color CCD)
(Optical unit)
C. Drive systemThe drive system is composed of the scanner motor, the pulleygear, the idle pulley, the idle gear, the belt 473, the belt 190, and theshaft.
The motor rotation is converted into reciprocated movements of thebelt 473 through the idle gear, the pulley gear, the belt 190, and theidle pulley to drive the optical unit.
100
75
5045.4
100.0
50.2
25
380 480 580 680 780
Wavelength [nm]
Sen
sitiv
ity
1 Table glass 2 Optical unit 3 Lens4 Mirror 1 5 Mirror 2 6 Mirror 37 CCD PWB 8 Lamp 9 Reflector10 Original
Spectral sensitivity characteristics (Standard characteristics)
Rela
tive
se
nsitiv
ity
Wavelength [nm]
89 98101
7
53 4 2
6
7 9
3 4 6 2 8 5
1
3
1 Scanner motor 2 Pulley gear 3 Idle pulley4 Belt 473 5 Belt 190 6 Optical unit7 Shaft 8 Idle gear 9 Table glass
AL-2030/2040CS/2050CS OPERATIONAL DESCRIPTIONS 7 - 2
3. Laser unitThe image data sent from the MCU (image process circuit) is sentto the LSU (laser unit), where it is converted into laser beams.
A. Basic structureThe LSU unit is the writing section of the digital optical system.
The semiconductor laser is used as the light source, and imagesare formed on the OPC drum by the polygon mirror and fθ lens, etc.
The laser beams are passed through the collimator lens, the cylin-drical lens, the polygon mirror, the fθ lens, and the mirror to formimages on the OPC drum in the main scanning direction. The laseremitting PWB is provided with the APC (auto power control) in orderto eliminate fluctuations in the laser power. The BD PWB works formeasurement of the laser writing start point.
Makes the laser scanning speeds at both ends of the drum same aseach other.
B. Laser beam path
C. CompositionEffective scanning width: 216mm (max.)
Resolution: 600dpi
Beam diameter: 75um in the main scanning direction, 80um in thesub scanning direction
Image surface power: 0.18 ± 0.01mW (Laser wavelength 770 -795nm)
Polygon motor section: Brushless motor 20.787rpmNo. of mirror surfaces: 5 surfaces
4. Fuser section
No Component Function1 Semiconductor laser Generates laser beams.2 Collimator lens Converges laser beams in parallel.3 Cylinder lens Takes the focus.4 Polygon mirror,
polygon motorReflects laser beams at a constant rpm.
5 BD (Lens, PWB) Detects start timing of laser scanning.
6 fθ lens Converges laser beams at a spot on the drum.Makes the laser scanning speeds at both ends of the drum same as each other. (Refer to the figure below.)
2
3
3
6
4 1
5
6
a ≠ b ≠ ca b c
d = e = fd e f
fθ LENS
AL-2030/2040CS/2050CS OPERATIONAL DESCRIPTIONS 7 - 3
A. General descriptionGeneral block diagram (cross section)
Top view
(1) Heat rollerA Teflon roller is used for the heat roller and a silicone rubber rolleris used for the lower heat roller for better toner fusing performanceand paper separation.
(2) Separator pawlThree separator pawls are used on the upper heat roller. The sep-arator pawls are Teflon coated to reduce friction with the roller andprevent a smear on the paper caused by the separator pawl.
(3) Thermal control1) The heater lamp, thermistor, main PWB, DC power supply
PWB, and triac within the power supply unit are used to controlthe temperature in the fuser unit.To prevent against abnormally high temperature in the fuserunit, a thermal breaker and thermal fuse are used for safety pur-poses.
2) The surface temperature of the upper heat roller is set to 160 -200°C. The surface temperature during the power save mode isset to 100°C.
3) The self-check function comes active when one of the followingmalfunctions occurs, and an "H" is displayed on the multicopywindow.
a. When the heat roller surface temperature rises above 240°C.
b. When the heat roller surface temperature drops below 100°Cduring the copy cycle.
c. Open thermistor
d. Open thermal fuse
e. When the heat roller temperature does not reach 190°C within27 second after supplying the power.
(4) Fusing resistorThis model is provided with a fusing resistor in the fusing sectionto improve transfer efficiency.
Since the upper heat roller is conductive, when using copy paperthat contains moisture and the distance between the transfer unitand the fusing unit is short, the transfer current may find a path toground via the copy paper, the upper heat roller and the discharg-ing brush.
5. Paper feed section and paper transport section
A. Paper transport path and general operations
Paper feed is made in two ways; the tray paper feed and the man-ual paper feed. The tray is of universal-type, and has the capacityof 250 sheets.
The front loading system allows you to install or remove the trayfrom the front cabinet.
The general descriptions on the tray paper feed and the manualpaper feed operation are given below.
Separator pawl
Separator pawl
PPD2
Thermal fuse
Thermistor
Heat roller
Paper guide
Pressure roller
Heat rollerThermistor
Thermal fuse
Heater lamp
Separator pawl
Safety device(thermal breaker, thermalfuse)
Triac (in thepower supply unit)
Heated by the heater lamp. (950W)
The surface temperatureof the upper heat roller issensed by the thermistor.
Level of the thermistor iscontrolled by the main PWB.
With the signal from themain PWB, the triac iscontrolled on and off.(power supply PWB)
1 Scanner unit 8 Drum
2 Copy lamp 9 Transfer unit3 LSU (Laser unit) 10 Pickup roller
4 Paper exit roller 11 Manual paper feed tray
5 Main charger 12 Manual paper feed roller
6 Heat roller 13 PS roller unit
7 Pressure roller 14 Paper feed roller
1
54 3
7
6
89
11121314
10
2
AL-2030/2040CS/2050CS OPERATIONAL DESCRIPTIONS 7 - 4
(1) Cassette paper feed operation1) The figure below shows the positions of the pick-up roller, the
paper feed clutch sleeve, and the paper feed latch in the initialstate without pressing the Start key after lighting the readylamp.The paper feed latch is in contact with the projection of theclutch sleeve.
2) When the Start key is pressed, the main drive motor startsrotating to drive each drive gear.The pick-up drive gear also is driven at that time. Since, how-ever, the paper feed latch is in contact with the projection of theclutch sleeve, rotation of the drive gear is not transmitted to thepick-up roller, which does not rotate therefore.
3) After about 0.1 sec from when the main motor start rotating, thetray paper feed solenoid (PFS) turns on for a moment.This disengages the paper feed latch from the projection of theclutch sleeve, transmitting rotation of the pick-up drive gear tothe paper feed roller shaft, rotating the pick-up roller to feed thepaper.
4) After more than half rotation of the pick-up roller, the paper feedlatch is brought in contact with a notch on the clutch sleeve,stopping rotation of the pick-up roller.
5) At this time, the paper is fed passed the paper entry detectionswitch (PPD1), and detected by it. After about 0.15 sec fromdetection of paper by PPD1, the tray paper feed solenoid (PFS)turns on so that the clutch sleeve projection comes into contactwith the paper feed latch to stop the pick-up roller. Then thepick-up roller rotates for about 0.15 sec so that the lead edge ofthe paper is evenly pressed on the resist roller, preventingagainst skew feeding.
6) To release the resist roller, the tray paper feed solenoid and theresist solenoid are turned on by the paper start signal to disen-gage the resist start latch from the clutch sleeve, transmittingrotation of the resist drive gear to the resist roller shaft. Thus thepaper is transported by the resist roller.
7) After the resist roller starts rotating, the paper is passed throughthe pre-transfer guide to the transfer section. Images are trans-ferred on the paper, which is separated from the OPC drum bythe drum curve and the separation section.
8) The paper separated from the drum is passed through the fus-ing paper guide, the heat roller (fusing section), POD (paper outdetector) to the copy tray.
OFF
PFS
OFF
RRS
OFF
PFS
OFF
RRS
ON
PFS
OFF
RRS
OFF
PFS
ON
RRS
AL-2030/2040CS/2050CS OPERATIONAL DESCRIPTIONS 7 - 5
(2) Manual multi paper feed operation1) Before paper feed operation, the manual paper feed solenoid
(MPFS) is turned OFF as shown in the figure below.
2) When the Start key is pressed, the manual paper feed solenoid(MPFS) turns on to disengage the manual paper feed latch.A from the manual paper feed clutch sleeve A, rotating the man-ual paper feed roller and the manual take-up roller. At the sametime, the manual paper feed stopper opens and the manualtake-up roller is pressed to the surface of the paper to startpaper feeding.
3) When pawl C of the manual paper feed clutch sleeve isengaged with the manual feed latch, the manual feed stopperfalls and the manual take-up roller rises. At that time, the man-ual paper feed roller is rotating.
4) The lead edge of the transported paper is pressed on the resistroller by the transport roller. Then the paper is stopped tempo-rarily to allow synchronization with the lead edge of the imageon the OPC drum.From this point, the operation is the same as the paper feedoperation from the tray. (Refer to 7-5 - 8.)
5) The solenoid turns off to close the gate and return to the initialstate.
OFMPFS
F
C A
ON
MPFS
A
C
ONMPFS
A
C
OFMPFS
F
AC
AL-2030/2040CS/2050CS OPERATIONAL DESCRIPTIONS 7 - 6
(3) Conditions of occurrence of paper misfeed
a. When the power is turned on:PPD or POD is ON when the power is turned on.
b. Copy operation
6. Process unit new drum detection mechanism
1) When the power is turned on, the detection gear 38T is rotatedin the arrow direction by the detection gear 20T to push themicro-switch (process detection switch) installed to the machinesensor cover, making a judgement as a new drum.
2) When the detection gear 38T turns one rotation, there is nogear any more and it stops.
The latch section of the 38T gear is latched and fixed with theprojection of the process cover.
7. SPF/RSPF sectionA. OutlineThe SPF (Single Path Feeder) is installed to the AL-2030/2040CSas a standard provision.
The RSPF (Reverse Single Path Feeder) is installed to the AL-2050CS as a standard provision.
It automatically copies up to 50 sheets of documents of a samesize. (Only one set of copies)
a PPD1 jam PPD1 does not turn off within 4 sec after turning on the resist roller.
b PPD2 jam PPD2 is off immediately after turning on the resist roller.
PPD2 does not turn off within 1.2 sec after turning off the resist roller.
c POD jam POD does not turn on within 2.9 sec after turning on the resist roller.
POD does not turn off within 1.5 sec - 2.7 sec after turning off PPD2.
Gear 20T
Process detection switch
Gear 38T
Gear notch
Gear pawl
Projection
Gear notch
Gear pawl
Projection
AL-2030/2040CS/2050CS OPERATIONAL DESCRIPTIONS 7 - 7
B. Document transport path and basic composition
AL-2030/2040CS
AL-2050CS
C. Operational descriptions
AL-2030/2040CS
SPF JAM generation condition
1) When SPPD is ON (document remaining) in initializing
2) When SPPD is not turned ON within about 1.5 sec (at 100%copy) after starting the document feed operation.
3) When SPPD is not turned OFF within about 4.7 sec (at 100%copy) after turning on SPPD.
4) When the OC cover is opened during document transport (dur-ing SPF motor rotation) (The SPF motor is stopped during doc-ument transport, but the OC cover open error occurs instead ofthe SPF JAM.)
1 Pickup roller 2 Sheet of document for paper feed3 Set detection ACT 4 Document feed roller5 Separation sheet 6 Paper entry sensor7 PS roller D 8 Transport follower roller9 Paper exit roller 10 Paper exit follower roller11 Document tray
1 Pickup roller 2 Separation roller3 Paper empty sensor 4 Upper transport roller5 Paper sensor 6 PS roller7 Lower transport roller 8 Reverse self-weight gate9 Paper exit sensor 10 Paper exit roller
1119 3 4
5
210 6 7
8
1 2 4 5
6810 7
3
9
SPID ON
PSW ON
MRMT rotation
MM rotation
CPFS ON
SPFM rotation
Document set
Document set sensor
Document feed unit lamp ON
PPD ON
RRC ON SPPD ON
POD ON
Copy start
The scanner is shiftedto the exposure position.
(Copier side)
Main motor rotation
Paper feed
Synchronization
(Transfer)
(Fusing) (Document exit)
Paper transport(Exposure)
In the zooming mode, the magnification ratio in the sub scanning direction (paper transport direction) is adjustedby changing the document transport speed.
(Paper exit)
SPF motor rotation
Document transport sensor
Document transport
(SPF side)
PSW
MRMT
SPF M
CL
SPPD260ms 182ms
SCANST
MAIN M
CPFS1
RRS
PPD1
PPD2
POD
AL-2030/2040CS/2050CS OPERATIONAL DESCRIPTIONS 7 - 8
AL-2050CS
RSPF JAM generation condition
1) The SPPD is ON when turning ON the power.
2) The SPPD does not turn ON for 4.0sec from starting documentfeed. (in 100% copy)
3) The SPPD does not turn OFF for 4.7sec after detecting turningON of the SPPD. (100% copy)
4) The RSPF cover or the OC cover is opened during documenttransportation.
5) The SRJD is ON when the power is turned ON.
6) The SRJD is not turned ON for 2.4sec from release of PS inpaper feed from the document set position. (100% copy)
7) The SRJD is not turned OFF for 1.6sec from completion of doc-ument scan in the case of complete document exit. (100%copy)
D. SPF/RSPF open/close detection (book document detection)
SPF/RSPF open/close detection (book document) detection is per-formed by detecting the interval between the reference lines on thewhite Mylar attached to the paper exit guide (document scanningsection) by the scanner (CCD) and detecting the varied quantity.
Note: When replacing the carriage unit, be sure to execute SIM41-06.If SIM41-06 is not executed, the carriage unit may not readthe reference line on the white Mylar, preventing the docu-ment from being fed.
8. D-D (Duplex to Duplex) mode paper/document transport (Duplex model) (AL-2050CS only)
A. Initial stateSet duplex documents on the document tray.
Set paper on the cassette. (In the duplex mode, the manual feedtray cannot be selected.)
B. Front copyDocument transport:
The document feed roller feeds the document from the paper feedroller to the PS roller.
• The document is exposed in the exposure section, and trans-ported to the document exit section by the lower transport rollerand the paper exit roller.
• The document is transported to the paper exit tray. (However, it isnot discharged completely.)
• The document is stopped once, and then switchback operation isperformed. (To the back copy)
Paper transport:
The paper is passed through the paper feed roller and the PS roller,and the images on the front surface are transferred.
• The paper is passed through the fusing section and the lowerside of the gate section to the paper exit tray side. (However, it isnot discharged completely.)
• The paper is stopped once, and switchback operation is per-formed. (To the back copy)
PSW
MRMT
SPF M
CLSPUSSPPD
SCANST
SRVC
SRJD
MAIN M
CPFS1RRSPPD1
PPD2
POD
1200msec560msec
BA
B
AA - B = Varied quantity of pixels
(pixel)
(Floating)
(White Mylar)
(CCD)
Reference line Reference line
AL-2030/2040CS/2050CS OPERATIONAL DESCRIPTIONS 7 - 9
C. Back copyDocument transport:
By switchback operation, the document is sent through the uppertransport roller and the PS roller to the exposure section, where theback surface of the document is exposed.
• The document is sent to the document exit section by the lowertransport roller and the paper exit roller.
• The document is sent to the intermediate tray. (However, it is notdischarged completely.)
• The document is stopped once, and switchback operation is per-formed.
• The document is sent through the upper transport roller and thePS roller and the exposure section (without being exposed) to thedocument exit section.
• The document is discharged to the document exit tray.
Paper transport:
Switchback operation is performed.
• The paper is sent through the upper side of the gate section andthe duplex transport section and the PS roller, and the images onthe back surface are transferred.
• The paper is sent through the fusing section and discharged tothe paper exit tray.
Rotation copy mode:
The front and the back are in upside down each other.
Copy mode without rotation:
The front and the back are not in upside down.
9. Shifter (AL-2050CS only)
Shift width: 2.5cm
The offset function by the shifter is turned ON/OFF by the user pro-gram.
According to the setting, offset operation is performed for every job.(Default: ON)
AL-2030/2040CS/2050CS OPERATIONAL DESCRIPTIONS 7 - 10
[8] DISASSEMBLY AND ASSEMBLY
The disassembly and assembly procedures are described for thefollowing sections:
1. High voltage section
2. Operation panel section
3. Optical section
4. Fusing section
5. Tray paper feed/transport section
6. Manual paper feed section
7. Rear frame section
8 Power section
9. Duplex motor section (AL-2040CS/2050CS only)
10. Reverse roller section (AL-2040CS/2050CS only)
11. RSPF section (AL-2050CS only)
12. SPF section (AL-2030/2040CS only)
13. 2nd cassette section (AL-2040CS/2050CS only)
1. High voltage sectionA. List
B. Disassembly procedure1) Press the side cover open/close button and open the side
cover.
2) Push up the lock pawls (2 positions) of the side cover, andremove the transfer charger.
C. Assembly procedureFor assembly, reverse the disassembly procedure.
D. Charger wire cleaning1) Remove the charger cleaner from the manual paper feed unit.
Before disassembly, be sure to disconnect the power cord for safety.
1. Do not disconnect or connect the connector and the harness while the machine is powered. Especially be careful not to disconnect or connect the harness between the MCU PWB and the LSU (MCU PWB: CN42) during the machine is powered. (If it is disconnected or connected during the machine is powered, the IC inside the LSU will be destroyed.)
2. To disconnect the harness after turning on the power, be sure to turn off the power and wait for at least 10 sec before disconnection. (Note that a voltage still remains immediately after turning off the power.)
No. Part name Ref.1 Transfer charger unit2 Charger wire
1)
2)
2)
1)
1)Transfercharger
Lock pawl rear
Lock pawl front
1)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 1
2) Clean the TC front guide and the TC holder with alcohol.
3) Set the charger cleaner to the transfer unit, and move it recipro-cally a few times in the direction of the arrow shown in the figurebelow.
E. Charger wire replacement1) Remove the TC cover and remove the screw.
2) Remove the spring and remove the charger wire.
3) Install a new charger wire by reversing the procedures (1) and(2).At that time, be careful of the following items.
• The rest of the charger wire must be within 1.5mm. Refer to Fig.1
• The spring hook section (charger wire winding section) must bein the range of the projection section.
• Be careful not to twist the charger wire.
2. Operation panel sectionA. List
B. Disassembly procedure1) Open the side door, and Open the front cover.
1)
2)
3)4)
No. Part name Ref.1 Operation panel unit2 Operation PWB
1mm
1.5mm
Fig.1
1)
1)
2)
3)
Charger wire
Protrusion
1)
2)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 2
2) Remove the screws (4 pcs.), the harness, and the operationpanel unit.
3) Remove four screws, and remove the operation cabinet.
4) Remove four screws, and remove the operation PWB.
(AL-2030/2040CS)
(AL-2050CS)
C. Assembly procedureFor assembly, reverse the disassembly procedure
3. Optical sectionA. List
B. Disassembly procedure1) Remove four screws, and remove the rear cabinet and the rear
cabinet cover.
1)
1)
1)
2)
1)
1)
1)1)
1)2)
3)3)
3)
3)3)
3)
3) 3)
4)
NO. Part name Ref.1 Copy lamp unit2 Copy lamp3 Lens unit
1)
3)
2)
2)
5)
5)
5)
5)
4)
1)
1)
2)
2)
1)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 3
2) Remove two screws, and remove the earth wire.
3) Disconnect the connector.
4) Remove the SPF/RSPF unit.
5) Remove five screws. Remove the operation unit, and discon-nect the connector.
6) Remove the right cabinet.
7) Remove the left cabinet.
8) Remove the screw, and remove the rear cover.
9) Remove the table glass.
10) Move the carriage to the position indicated on the figure.
11) Loosen the screw which is fixing the tension plate.
12) Move the tension plate in the arrow direction to release the ten-sion, and remove the belt.
13) Remove the screw, and remove the rod stopper.
14) Remove the rod.
15) Lift the rear side of the carriage, remove the belt and the con-nector, and remove the carriage.
1)
2)
3)
1)
2)
4)
5)
6)
7)
8)
1)
1)
1)
3)
1)
1)
1)
2) 4)
3)
1)2)
3)
1)
2)
4)
3)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 4
C. Assembly procedureCCD core
1) Insert the CCD-MCU harness into the CCD PWB of the car-riage unit.
2) Attach the CCD-MCU harness to the duplex tape on the backsurface of the carriage unit. Clean and remove oil and dirt fromthe attachment surface.
3) Pass the CCD-MCU harness through the square hole in thebase plate.
4) Attach the CCD-MCU harness to the base plate with duplextape.
5) Attach two cable fixing sheets to fix the CCD-MCU harness tothe base plate.
6) Pass the core through the CCD-MCU harness and fix the core.
7) Insert the CCD-MCU harness into the MCU PWB.
4. Fusing sectionA. List
B. Disassembly procedure1) Remove the connectors (3 pcs.) of the rear cabinet.
2) Open the side cover, remove two screws, and remove the fus-ing unit.
3) Cut the binding band, remove the screw, and remove the ther-mistor.
Note: Attach the FCC to the base plate securely with duplex tape to prevent against coming loose.
Note: Attach the FCC to fit with the marking line. Marking line.
No. Part name Ref.1 Thermistor2 PPD2 sensor3 Heater lamp4 Pressure roller5 Heat roller
1)
2)3)
2)
1)
2)
3)Thermistor
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 5
4) Remove the screw and remove the U-turn guide.
Pressure roller section disassembly
5) Remove the three screws, remove the fusing cover lower on theright side, and open the heat roller section.
6) Remove the screw and remove the PPD2 sensor.
7) Remove the plate spring on the right and remove the heaterlamp.
8) Remove the spring, and remove the upper separation pawls (3pcs.).
9) Remove the E-ring and remove the reverse gate.
1)
2)
1)
5)
5)
6)
6)
4)3)2)
1)
2)PPD2 sensor
1)
2)
Heater lamp
3)
1)
2)
2)
1)
3)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 6
10) Remove the spring, and remove the lower separation pawls (4pcs.).
11) Remove the pressure release levers on the right and the leftsides.
12) Remove the pressure roller, the pressure bearing, and thespring.
Note: Apply grease to the sections specified with an asterisk (∗).Grease: "JFE552" UKOG-0235FCZZ
Heat roller disassembly
(Continued from procedure (4).)
5) Remove screws, remove the fusing cover, and open the heatroller section.
6) Remove the C-ring and the fusing bearing, and remove the heatroller.
7) Remove the parts from the heat roller.
Note: Apply grease to the sections specified with ∗1.Grease: "JFE552" UKOG-0235FCZZ
8) Remove two screws and remove the thermo unit.
Note: The set temperature of the thermostat differs from that of thecurrent model.
2)
2)
2)
1)
2)
1)
1)
1)
2)
2)
1)
3)
3)
Pressure roller
Temperature
Current model 210°C
AL-2030/2040CS/2050CS 230°C
1)
2)
2)
3)
3)
1)2) 3) Heat roller
3)2)
1)
1
1
1
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 7
C. Assembly procedureFor assembly, reverse the disassembly procedure.
5. Tray paper feed/transport sectionA. List
B. Disassembly procedure1) Remove the paper holding arm.
Remove the arm holder from the main unit, and remove theholder from the arm. (AL-2050CS only)
2) Remove two screws, and remove the hinge guide R.
3) Disconnect the connector. (2 positions)
4) Remove five screws, and remove the scanner unit.
5) Remove the fan duct.
6) Remove each connector and four screws, and remove the MCUPWB. (The shape of the MCU PWB differs depending on themodel.)
No. Part name Ref.1 PPD1 sensor PWB2 POD sensor PWB3 LSU unit4 Intermediate frame unit5 Paper feed roller
1)
2)
3)
3)
1)
2)
2)
4)
2)
2)
1)
2)2)
2) 2)
2)
3)
1)
1)1)
1)
2)
2)
3)
2)
1)
1)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 8
7) Remove the PWB insulation mylar and remove the paper trans-port detection sensor (POD).
8) Remove two springs and open the intermediate frame unit. (AL-2030/2040CS only)
9) Remove the screw, and open the upper paper guide. (AL-2050CS only)
10) Remove the roller, and remove the belt. (AL-2050CS only)
2)
1)
1)
2)
1)1)
2)
1)
2)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 9
11) Remove the pulleys on the both sides and remove the paperexit roller. (AL-2030/2040CS only)
12) Disengage the pawl, and remove the roller knob.
13) Disengage the pawl, and shift the pulley and the bearing.
14) Remove the paper exit roller, and remove the belt, the pulley,and the bearing.
15) Remove the harness guide.
16) Remove two screws and remove the toner motor.
17) Remove three screws, and remove the DUP motor unit and thebelt. (AL-2040CS/2050CS)
4)
2)
1)3)
1)
2)3)
4)
1)2)
1)
2)
1)
1)
2) 3)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 10
18) Remove five screws and the grounding wire.
For the AL-2030, remove the main drive plate and the belt.For the AL-2040CS/2050CS, remove the main drive plate.
19) Remove the parts as shown below, and remove the pressurerelease solenoid and the paper feed solenoid.
20) Remove four screws, and remove the paper guide unit. (AL-2030/2040CS only)
21) Remove four screws, and remove the lower paper guide unit.(AL-2050CS only)
[Note for installation]
Fit the lower paper guide hole (a) with the shifter gear hole (b)so that the black resin (c) of the shifter unit can be checked.
1)
1)
3)
2)
1)
CAUTION:Attach the gears securely
1)
AL-2030 onlyAL-2030 onlyAL-2030 only
3)
3)
1)
1)
2)
2)
4)
4)
2)
1)
1)
1)
1)
1)1)1)
2)
abc
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 11
22) Put the lower paper guide unit upside down, remove twoscrews, and remove the shifter motor. (AL-2050CS only)
23) Remove the screw, and remove the grounding plate and thegear. (AL-2050CS only)
24) Remove the E-ring, the gear, and the bearing, and remove theshifter roller. (AL-2050CS only)
25) Disengage the pawl, and remove the pulley.
26) Shift and remove the shifter unit. (AL-2050CS only)
27) Remove four screws, and remove the LSU unit.
[Note for assembling the LSU]
When installing the LSU, turn the LSU clockwise and fix withscrews in order to provide an attachment backlash in the properdirection.
Observe the following sequence of fixing screws.
1)
2)
1)
2)
3)
1)
2)
3)
3)
4)
1)
1)
1)
2)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 12
28) Remove the screw, slide the left cabinet to the left to detach it.
Remove each pawl, and remove the paper exit tray.
29) Remove two screws and remove the fusing connector.
30) Remove five screws and the connector, and lift the intermediateframe unit to remove.
31) Remove the screw and the E-ring, and remove the PS semi-cir-cular earth plate and the PS roller unit.
32) Remove the E-ring and remove the spring clutch from the PSroller unit.
33) Remove three screws and remove the TC front paper guide.
5)
1)2)
3)
4)
2)
2)
3)
4)
1)
5)
4)
4)
1)
2)
3)
PS roller unit
PS semi-circulerearth plate
5)
4)
4)
1)
2)
3)
PS semi-circularearth plate
Use grease of Floil FG40H only to apply to this section.
1)
2)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 13
34) Remove the screw and the connector, and remove the PPD1sensor PWB.
35) Remove two E-rings and remove the paper feed roller.
36) Remove three E-rings and remove the clutch unit.
C. Assembly procedureFor assembly, reverse the disassembly procedure.
6. Manual paper feed sectionA. List
B. Disassembly procedureMulti unit
1) Remove the screw and remove the multi upper cover.
1)
2)
4)
5)
1)
2)
3)
4)
Back
Front
Clutch unit
Paper feedroller
No. Part name Ref.1 Manual transport roller2 Cassette detection switch3 Side door detection unit
2)
1)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 14
2) Remove the screw and remove the side door detection unit.
3) Remove three screws and remove the multi paper feed upperframe.
4) Remove two screws and remove the multi feed bracket unitfrom the multi paper feed upper frame.
5) Remove three E-rings and remove the manual paper feed rollerB9.
1)
2)
Back Wire treatment
1)
2)
1)
2)
2)
1) 1)
2)
1) 1)
1)
3)
L O C K
TO
K
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 15
6) Remove the pick-up roller.
7) Cut the binding band and remove the multi paper feed solenoid.
C. Assembly procedureFor assembly, reverse the disassembly procedure.
D. Pressure plate holder attachment1) Attach the pressure plate holder so that the resin section is not
covered with the seal M1-N.
7. Rear frame sectionA. List
B. Disassembly procedure1) Remove four screws, and remove the rear cabinet and the rear
cabinet cover.
2)
1)
1)
2)3)Multi paper feedsolenoid
No. Part name Ref.1 Scanner motor2 Main motor3 Exhaust fan motor4 NIC PWB5 Main PWB
Pressure plateholder
Seal M1-N
Attachmentreference
Attachmentreference
1)
1)
2)
2)
1)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 16
2) Disconnect the connector.
3) Remove two screws, and remove the scanner motor.
4) Remove two screws and one harness, and remove the mainmotor.
5) Remove two screws and one connector, and remove theexhaust fan motor.
6) Disconnect the connector.
7) Remove the two screws, and remove the NIC PWB. (AL-2040CS/2050CS only)
8) Disconnect the connector.
9) Remove the three screws, and remove the NIC PWB unit. (AL-2040CS/2050CS only)
10) Disconnect the connectors.
11) Remove the five screws, and remove the MCU PWB. (Theshape of the MCU PWB differs depending on the model.)
C. Assembly procedureFor assembly, reverse the disassembly procedure.
1)
2)
3)
1)
2)
3)
1)
2)
3)
Blowing direction
2)
2)
3)
1)
3)
3)
1)2)
2)
2)
3)
2)
2)
2)1)
1)
1)1)
1)
1)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 17
8 Power sectionA. List
B. Disassembly procedure1) Disconnect each connector.
2) Remove the screw, and remove the earth line.
3) Remove two screws, and remove the power PWB unit.
C. Assembly procedureFor assembly, reverse the disassembly procedure.
9. Duplex motor section (AL-2040CS/2050CS only)
A. List
B. Disassembly procedure1) Remove the rear cabinet.
2) Remove two screws.
3) Remove the Duplex motor cover.
4) Remove the Duplex motor.
Note: When reassembling, be sure to engage the Duplex motorgear with the belt on the main body side.
C. Assembly procedureFor assembly, reverse the disassembly procedure.
10. Reverse roller section (AL-2040CS/2050CS only)
A. List
B. Disassembly procedure1) Remove four screws.
2) Remove the spring, and the earth wire.
3) Remove the reverse unit.
4) Bend the reverse roller and remove it.
C. Assembly procedureFor assembly, reverse the disassembly procedure.
No. Part name Ref.1 Power PWB
No. Part name Ref.1 Duplex motor
1) 1)1)
1)
2)
3)
4)
4)5)
1)
12
31
No. Part name Ref.1 Reverse roller
1
2
3
1
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 18
11. RSPF section (AL-2050CS only)A. Front cabinet, rear cabinet
(1) Open the upper door unit.
(2) Front cabinet and rear cabinet removal1) Remove two screws.
2) Disengage the five pawls.
3) Remove the front cabinet and the rear cabinet.
B. Upper door unit1) Release the shaft on the front side.
2) Remove the upper door unit.
C. Document tray unit1) Release the shaft on the front side.
2) Remove the tray unit.
Note for reassembly
Use care so that the paper exit Mylar in not pinched between thepaper exit roller and the follower roller.
D. Upper door open/close sensor1) Disconnect one connector.
2) Remove the upper door open/close sensor.
E. Reverse clutch, paper exit roller
(1) Reverse clutch removal1) Disconnect one connector.
2) Remove the resin E-ring.
3) Remove the reverse clutch.
Note for reassembly
Attach the stopper of the reverse clutch along with the rib on themotor mounting plate.
1
1
2
2
222
1
33
1
2
1
2
2
1
1
3
2
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 19
(2) Paper exit roller removal1) Remove the E-ring.
2) Slide the bearing.
3) Remove the paper exit roller.
4) Remove the E-ring.
5) Remove the bearing.
F. Drive unit
(1) Transport unit removal1) Disconnect four connectors.
2) Remove the harness from the clamp.
3) Remove the snap band.
4) Remove one screw.
5) Remove the earth wire.
6) Remove one screw.
7) Disconnect the RSPF harness.
8) Remove four screws.
9) Remove the transport unit.
Note for reassembly
Before assembly, be sure to check that the harness is passedthrough the rib.
Arrange the RSPF harness to the outside of the base tray so that itis nit pinched before assembly.
(2) Drive unit removal1) Remove three screws.
2) Remove the drive unit.
(3) Drive motor removal1) Remove the gear.
2) Remove two screws.
3) Remove the drive motor.
Note for reassembly
Connect the connectors according to the arrow indication markedon the motor mounting plate.
3
41
2
5
1
1
3
6
7
54
1
1
2
8
8
8
9
1
12
1
3
2
1
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 20
G. Shutter solenoid
(1) Shutter solenoid unit removal1) Remove the harness from the edge saddle.
2) Remove one screw.
3) Remove the shutter solenoid unit.
Note for reassembly
Install the paper feed solenoid under the state where the projectionof the paper feed planet arm is lower than the paper feed solenoidlever.
(2) Shutter solenoid removal1) Remove the paper feed solenoid spring from the shutter sole-
noid.
2) Remove the paper feed solenoid lever.
Note for reassembly
When assembling, use care so that the paper feed solenoid springdoes not extend out of the paper feed solenoid lever.
H. Pickup roller, take-up roller
(1) Paper feed unit removal1) Remove the E-ring.
2) Slide the bearing.
3) Remove the stopper arm.
4) Release the paper feed shaft pressure release spring.
5) Remove the paper feed unit.
6) Remove the paper feed shaft release arm.
(2) Parts removal1) Remove the E-ring.
2) Remove the resin E-ring.
3) Slide the shaft.
4) Remove the spring pin.
(3) Paper feed roller removal1) Pull out the shaft.
2) Remove the clutch boss and the clutch spring from the pickuproller.
2
3
1
2
1
2
1
3
4
5
6
3
1
4
2
1
2
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 21
(4) Pickup roller removal1) Disengage one pawl.
2) Remove the pickup drive gear from the pickup roller.
I. Paper empty sensor
(1) Paper feed PG unit removal1) Remove the harness.
2) Remove three screws.
3) Lift the front side, and remove the paper feed PG unit.
(2) Paper feed PG support plate removal1) Remove one screw.
2) Slide and remove the paper feed PG support plate.
(3) Paper empty sensor removal1) Disconnect one connector.
2) Remove the paper empty sensor.
J. PS roller
(1) Parts removal1) Remove the gear.
2) Remove the pulley.
3) Remove the belt.
(2) Parts removal1) Remove one screw.
2) Remove the earth wire.
3) Remove the E-ring.
4) Remove the bearing.
5) Open the scan plate.
Note for reassembly
Pass the earth wire through the hole to the outside of the frame,then install parts.
1
32
2
3
2
1
2
1
2
1
1
3
2
4
1
5
3
4
2
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 22
(3) Scan plate removal1) Remove the scan plate.
(4) PS roller removal1) Remove the PS roller.
K. Upper transport roller
(1) Parts removal1) Remove the gear.
2) Remove the upper transport release arm.
3) Remove the bearing.
4) Remove the E-ring.
5) Remove the bearing.
Note for reassembly
Use care so that the rib on the upper transport release arm catchesthe guide.
(2) Upper transport roller removal1) Remove the upper transport roller.
L. Paper sensor1) Disconnect one connector.
2) Remove the paper sensor.
M. Lower transport roller
(1) Reverse self-weight gate removal1) Remove the reverse self-weight gate.
1
1
12 3
5 4
1
2
1
1
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 23
(2) Lower transport roller removal1) Remove the E-ring.
2) Remove the gear.
3) Remove the bearing.
4) Remove the lower transport roller.
N. Paper exit sensor
(1) OC mat removal1) Remove the OC mat.
(2) Paper exit sensor removal1) Disconnect one connector.
2) Remove the paper exit sensor.
12. SPF section (AL-2030/2040CS only)
(1) Rear cabinet disassembly1) Remove four screws.
2) Remove the rear cabinet.
(2) Remove the SPF.1) Remove two screws, and remove the earth wire.
2) Disconnect the connector.
3) Remove the SPF unit.
A. SPF motor1) Remove the screw.
2) Disengage the pawl (3 positions).
3) Remove the rear cabinet.
4
12
3
3
1
2
1
No. Part name Ref.A SPF motorB Pick-up roller, paper feed rollerC Paper exit rollerD Set sensor, scan front sensorE Transport roller
1)
2)
3)
1)
3)
2)2)
1)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 24
1) Remove the screw, and remove the harness.
2) Remove three screws.
3) Disengage the pawl (4 positions).
4) Remove the transport unit.
1) Remove two screws, and remove the earth wire.
2) Remove the SPF motor unit.
3) Disconnect the connector.
1) Remove two screws.
2) Remove the SPF motor.
B. Pick-up roller, paper feed roller1) Remove two gears.
1) Open the upper door.
2) Remove two E-rings, and remove the spring, the arm, and thebearing.
3) Remove the pick-up roller unit.
1) Remove the shaft.
2) Remove the paper feed roller.
3) Remove the bearing and the spring.
2)
2)
3)
3)
1)
4)
1)
2)
1)
1)
3)
1)
2)
1)
1)
1)2)
2)
2)
2)
3)
1)
2)
3)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 25
1) Remove the pick-up roller.
2) Remove the gear.
C. Paper exit roller1) Remove four gears.
2) Remove two screws.
3) Remove the frame.
1) Remove the E-ring.
2) Remove the bearing.
3) Remove the paper guide unit.
4) Remove the paper exit roller.
D. Set sensor, scan front sensor1) Remove the set sensor.
2) Remove the scan front sensor.
3) Disconnect the connectors.
∗ When assembling, attach the blue harness to the marking B sideof the sensor, and attach the orange harness to the opposite sidesensor.
E. Transport roller1) Remove the actuator.
2) Remove the transport roller.
3) Remove the gear and the bearing.
1)
2)
1)
2)
2)
3)
1)
1)
3)
2)
4)
1)
3)
3)
2)B
3)
1)
2)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 26
13. 2nd cassette section (AL-2040CS/2050CS only)
Paper feed unit removal
1) Remove the screw.
2) Remove the rear cover.
∗ When installing, engage the pawl and install the unit.
1) Open the right cabinet.
2) Remove three screws.
3) Remove one connector from MCU.
4) While tilting down the 2nd connection arm A, pull and removethe paper feed unit toward you.
∗ When installing, securely insert two bosses C on the machineside and two bosses D on the paper feed unit side. Be sure tosecure the ground wire B.
∗ Insert the 2nd page feed.
A. Paper sensor1) Remove the pawl.
2) Remove the paper sensor.
3) Remove the harness.
No. Part name Ref.A Paper sensorB Cassette detection SWC Paper feed solenoidD Transport rollerE Paper feed clutchF 2nd paper feed roller
1)
1)
2)
2)
1)
12A
1
2
4
B
A
3
2
D
D
C
2
3
1
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 27
B. Cassette detection switch1) Remove the pawl.
2) Remove the cassette detection switch.
3) Remove the harness.
C. Paper feed solenoid1) Remove the screw.
2) Remove the connector.
3) Remove the paper feed solenoid.
D. Transport roller1) Remove two E-rings.
2) Remove the transport roller.
∗ Install so that the earth spring A is brought into contact over bear-ing B.
E. Paper feed clutch1) Remove the E-ring.
2) Remove the paper feed clutch.
3) Remove the parts.
∗ When installing, fit the cut surface A.
F. 2nd paper feed roller1) Remove the E-ring and the parts.
2) Remove the 2nd paper feed roller.
∗ When installing, hang the 2nd connection arm on the 2nd con-nection arm Spring B. Be sure to install so that the earth spring Cis in contact under the bearing D.
1
2
3
1
2
3
4
2
1
3AB
A
1
2
3
B
1
2
1
CD
A
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 28
[9] ADJUSTMENTS
1. Optical sectionA. Copy magnification ratio adjustmentThe copy magnification ratio must be adjusted in the main scan-ning direction and in the sub scanning direction. To adjust, useSIM 48-1.
(1) OutlineThe main scanning (front/rear) direction magnification ratio adjust-ment is made automatically or manually.
Automatic adjustment: The width of the reference line marked onthe shading correction plate is scanned to perform the main scan-ning (front/rear) direction magnification ratio adjustment automati-cally.
Manual adjustment: The adjustment is made by [Copy quantity]keys (or [Numeric] keys for the AL-2050CS) operations. (In either ofthe automatic and manual adjustments, the zoom data register setvalue is changed for adjustment.)
The magnification ratio in the sub scanning direction is adjusted bychanging the carriage (scanner) scanning speed.
(2) Main scanning direction magnification ratio adjustment
a. Cases when the adjustment is required
1) When the main PWB is replaced.
2) When the EEPROM in the main PWB is replaced.
3) When "U2" trouble occurs.
4) When repairing or replacing the optical section.
b. Necessary tools
• Screwdriver (+)
• Scale
c. Adjustment procedure
1) Set the scale vertically on the document table. (Use a longscale for precise adjustment.)
2) Set the copy magnification ratio to 100%.
3) Make a copy on A4 or 81/2" x 11" paper.
4) Measure the length of the copied scale image.
5) Calculate the main scanning direction magnification ratio. Main scanning direction magnification ratio
6) Check that the copy magnification ratio is within the specifiedrange. If it is not within the specified range, perform the follow-ing procedures.
7) Execute SIM 48-1 to select the main scanning direction copymagnification ratio adjustment mode.To select the adjustment mode, use the [Exposure mode selec-tor] key (or [ ] [ ] key for the AL-2050CS).
In the case of the automatic adjustment, when the START switch ispressed, the mirror base unit moves to the white plate for shadingto scan the width of the reference line, calculating the correctionvalue and displaying and storing this value.
After execution of the automatic adjustment, go out from the simu-lation mode and make a copy to check the magnification ratio.
If the magnification ratio is not in the specified range (100 ± 1.0%),manually adjust as follows.
(AL-2030/2040CS)
(AL-2050CS)
8) Enter the new set value of main scanning direction copy magni-fication ratio with the copy quantity key (or [Numeric] key for theAL-2050CS), and press the [START] key.
9) Change the set value and repeat the adjustment until the ratio iswithin the specified range.When the set value is changed by 1, the magnification ratio ischanged by 0.1%.
(3) Sub scanning direction copy magnification ratio
a. Cases when the adjustment is required
1) When the scanner unit drive section is disassembled or the partis replaced.
2) When the main PWB is replaced.
3) When the EEPROM in the main PWB is replaced.
4) When "U2" trouble occurs.
b. Necessary tools
• Scale
=Copy image dimensions
X 100 (%)Original dimension
Adjustment mode Display lamp DefaultMain scanning direction magnification ratio
TEXT mode lamp 50
OC mode sub scan direction magnification ratio
PHOTO mode lamp 50
Adjustment modeDisplay
itemLED Default
Main scan direction magnification ratio
F-R PRINT mode lamp 50
OC mode sub scan direction magnification ratio
SCAN SCAN mode lamp 50
100 110 120 130 150140mm1/2mm
JAPAN
HARDENEDSTAINLESS
Shizuoka
100 110 120 130 150140mm1/2mm
JAPAN
HARDENEDSTAINLESS
Shizuoka
110
10 20
10 20
(When a 100mm scale is used as the original.)
Paper feeddirection
Reference Comparison point
Original (Scale)
Copy
AL-2030/2040CS/2050CS ADJUSTMENTS 9 - 1
c. Adjustment procedure
1) Set the scale on the document table as shown below. (Use along scale for precise adjustment.)
2) Set the copy magnification ratio to 100%.
3) Make a copy on A4 or 81/2" x 11" paper.
4) Measure the length of the copied scale image.
5) Calculate the sub scanning direction copy magnification ratiousing the formula below.
6) Check that the actual copy magnification ratio is within thespecified range. (100 ± 1.0%).If it is not within the specified range, perform the following pro-cedures.
7) Execute SIM 48-1 to select the sub scanning direction copymagnification ratio adjustment mode.To select the adjustment mode, use the [Exposure mode selec-tor] key (or [ ] [ ] key for the AL-2050CS). (PHOTO lampON (or SCAN mode lamp ON for the AL-2050CS))
8) Enter the new set value of sub scanning direction copy magnifi-cation ratio with the [Copy quantity] keys (or [Numeric] keys forthe AL-2050CS), and press the [START] key.
Repeat procedures 1) - 8) until the sub scanning direction actualcopy magnification ratio in 100% copying is within the specifiedrange.
When the set value is changed by 1, the magnification ration ischanged by 0.1%.
B. Image position adjustmentThere are following eleven kinds of image position adjustments,which are made by laser control except for the image scan startposition adjustment. For the adjustments, SIM 50-01 and 50-10 areused.
(AL-2030/2040CS)
To select the adjustment mode with SIM 50-01, use the [Exposuremode selector] key.
The relationship between the adjustment modes and the lightinglamps are as shown in the table below.
: Supported for the installing model and skipped for non-install-ing mode.
To select the adjustment mode with SIM 50-10, use the [Exposuremode selector] key.
The relationship between the adjustment modes and the lightinglamps are as shown in the table below.
Machine with the multi manual paper feed unit
: Supported for the installing model and skipped for non-install-ing mode.
=Copy image dimensions
X 100 (%)Original dimension
100 110 120 130 150140mm1/2mm
JAPAN
HARDDENCDSTAINLESS
Shizuoka
100 110 120 130 150140mm1/2mm
JAPAN
HARDDENCDSTAINLESS
Shizuoka
110
10 20
10 20
Original (Scale)
Paper feeddirection
Reference Comparison point Copy
No. Mode SIM1 Print start position
(Main cassette paper feed)50-01
2 Print start position (2nd cassette paper feed)
50-01 AL-2040CSAL-2050CS
3 Print start position (Manual paper feed) 50-014 Image lead edge void amount 50-015 Image scan start position 50-016 Image rear edge void amount
(Cassette paper feed)50-01
7 Image rear edge void amount (Manual paper feed)
50-01 AL-2050CS
8 Print center offset (Main cassette paper feed)
50-10
9 Print center offset (2nd cassette paper feed)
50-10 AL-2040CSAL-2050CS
10 Print center offset (Manual paper feed) 50-1011 2nd print center offset
(Main cassette paper feed)50-10 AL-2040CS
AL-2050CS
Adjustment mode Lamp ONPrint start position (Main cassette paper feed)
AE, main cassette lamp
Print start position (2nd cassette paper feed)
AE, 2nd cassette lamp
Print start position (Manual paper feed)
AE, manual feed lamp
Image lead edge void quantity TEXT lampImage scan start position PHOTO lampImage rear edge void quantity AE, TEXT, PHOTO lamp
Adjustment mode Lamp ONPrint center offset (Main cassette paper feed)
AE, main cassette lamp
Print center offset (2nd cassette) AE, 2nd cassette lampPrint center offset (Manual paper feed)
AE, manual paper feed lamp
Second side center offset TEXT lamp
AL-2030/2040CS/2050CS ADJUSTMENTS 9 - 2
(AL-2050CS)
To select the adjustment mode with SIM 50-01, use the [ ] [ ]key.
The relationship between the adjustment modes and the lightinglamps are as shown in the table below.
To select the adjustment mode with SIM 50-10, use the [ ] [ ]key.
The relationship between the adjustment modes and the lightinglamps are as shown in the table below.
(1) Lead edge adjustment1) Set a scale to the center of the paper lead edge guide as shown
below, and cover it with B4 or 8 1/2" x 14" paper.
2) Execute SIM 50-01
3) Set the print start position (AE lamp ON) (A), the lead edge voidamount (TEXT lamp ON) (B), and the scan start position(PHOTO lamp ON) (C) to 0, and make a copy of a scale at100%. (AL-2030/2040CS)
For the AL-2050CS, the following LED’s are lighted:
• AE lamp/COPY mode lamp: (A)
• TEXT lamp/PRINT mode lamp: (B)
• PHOTO lamp/SCAN mode lamp: (C)
4) Measure the image loss amount (R mm) of the scale image.Set C = 10 X R (mm). (Example: Set the value of C to 30.)When the value of C is increased by 10, the image loss isdecreased by 1mm. (Default: 50)
5) Measure the distance (H mm) between the paper lead edgeand the image print start position.Set A = 10 X H (mm). (Example: Set the value of A to 50.)When the value of A is increased by 10, the image lead edge isshifted to the paper lead edge by 1mm. (Default: 50)
6) Set the lead edge void amount to B = 50 (2.5mm).When the value of B is increased by 10, the void amount isincreased by about 1mm. For 25 or less, however, the voidamount becomes zero. (Default: 50)
(2) Image rear edge void amount adjustment1) Set a scale to the rear edge section of A4 or 11" x 8 1/2" paper
size as shown in the figure below, and cover it with B4 or 8 1/2"x 14" paper.
2) Execute SIM 50-01 to select the image rear edge void amountadjustment mode.The set adjustment value is displayed on the copy quantity dis-play.
3) Make a copy and measure the void amount of image rear edge.
Adjustment mode Display item Lamp ONPrint start position (Main cassette paper feed)
TRAY1 COPY mode lampMain cassette lamp
(*) Print start position (2nd cassette paper feed)
TRAY2 COPY mode lamp2nd cassette lamp
Print start position (Manual paper feed)
MFT COPY mode lampManual paper feed lamp
Image lead edge void amount
DEN-A PRINT mode lampMain cassette lamp
Image scan start position RRC-A SCAN mode lampMain cassette lamp
Image rear edge void amount (Cassette paper feed)
DEN-B COPY mode lampPRINT mode lampSCAN mode lampMain cassette lamp
Image rear edge void amount (Manual paper feed)
RRC-B COPY mode lampPRINT mode lampManual paper feed lamp
Adjustment mode Display item Lamp ONPrint center offset (Main cassette paper feed)
TRAY1 COPY mode lampMain cassette lamp
Print center offset (2nd cassette paper feed)
TRAY2 COPY mode lamp2nd cassette lamp
Print center offset (Manual paper feed)
MFT COPY mode lampManual paper feed lamp
2nd print center offset (Main cassette paper feed)
SIDE2 PRINT mode lampMain cassette lamp
5mm
10mm
(Example)Distance between paper leadedge and image: H = 5mm
Image loss:R = 3mm
B4 or 8 1/2″ × 14″ paper
A4 size rear edge
Paper rear edge
Void amount (Standard value: 2 - 3mm)
Scale image
AL-2030/2040CS/2050CS ADJUSTMENTS 9 - 3
4) If the measurement value is out of the specified range, changethe set value and repeat the adjustment procedure.The default value is 50.
Note: The rear edge void cannot be checked with the first sheetafter entering the simulation mode, the first sheet after turn-ing off/on the power, or the first sheet after inserting thecassette. Use the second or later sheet to check the rearedge void.
(3) Center offset adjustment1) Set the self-made test chart for the center position adjustment
so that its center line is aligned with the center mark of the doc-ument guide.
• Test chart for the center position adjustment.Draw a line at the center of A4 or 8 1/2" x 11" paper in the papertransport direction.
2) Execute SIM 50-10 to select the print center offset (cassettepaper feed) adjustment mode.The set adjustment value is displayed on the copy quantity dis-play.
3) Make a copy and check that the copied center line is properlypositioned.The standard value is 0 ± 2mm from the paper center.
4) If the measured value is out of the specified range, change theset value and repeat the adjustment procedure.When the set value is increased by 1, the copy image isshifted by 0.1mm toward the rear frame.
• For the manual paper feed, change the manual paper feedadjustment mode and perform the similar procedures.
• Since the document center offset is automatically adjusted bythe CCD which scan the reference lines (F/R) on the back ofdocument guide, there is no need to adjust manually.
2. Copy density adjustmentA. Copy density adjustment timingThe copy density adjustment must be performed in the followingcases:
• When maintenance is performed.
• When the developing bias/grid bias voltage is adjusted.
• When the optical section is cleaned.
• When a part in the optical section is replaced.
• When the optical section is disassembled.
• When the OPC drum is replaced.
• When the main control PWB is replaced.
• When the EEPROM on the main control PWB is replaced.
• When the memory trouble (U2) occurs.
B. Note for copy density adjustment1) Arrangement before execution of the copy density adjustment
• Clean the optical section.
• Clean or replace the charger wire.
• Check that the voltage at the high voltage section and the devel-oping bias voltage are in the specified range.
C. Necessary tool for copy density adjustment• One of the following test charts:
UKOG-0162FCZZ, UKOG-0089CSZZ, KODAK GRAY SCALE
• B4 (14" x 8 1/2") white paper
• The user program AE setting should be "3."
Test chart comparison table
D. Features of copy density adjustmentFor the copy density adjustment, the image data shift function pro-vided in the image process LSI is used.
List of the adjustment modes
Document guide
Center
Copy paper(A4 or 8 1/2″ × 11″)
(Copy A)
(Copy B)
2.0mm or less
2.0mm or less
Copy image
Copy paperfolding line
Copy image
Copy paperfolding line
Shift
Shift
(Paper feed direction)
UKOG-0162FCZZDENSITYNo.
1 2 3 4 5 6 7 8 9 10 W
UKOG-0089CSZZDENSITYNo.
0.1 0.2 0.3 0.5 1.9 0
KODAKGRAYSCALE
1 2 3 4 19 A
Auto mode Brightness 1 step onlyManual mode Brightness 5 steps. Adjustment of only the
center brightness is made.Photo mode Brightness 5 steps. Adjustment of only the
center brightness is made.Manual T/S mode Brightness 5 steps. Adjustment of only the
center brightness is made.T/S Auto mode Brightness 1 step only
1 10 W2 3 4 5 6 7 8 9
AL-2030/2040CS/2050CS ADJUSTMENTS 9 - 4
E. Copy density adjustment procedureUse SIM 46-1 to set the copy density for each copy mode.
For selection of modes, use the [Exposure mode selector] key (or[ ] [ ] key for the AL-2050CS).
(1) Test chart (UKOG-0162FCZZ) setting1) Place the test chart so that its edge is aligned with the A4 (Let-
ter) reference line on the document table. Then place a A4(14" x 8 1/2") white paper on the test chart and close the docu-ment cover.
(2) Perform the adjustment in each mode.1) Execute SIM 46-01 (300dpi). To adjust in 600dpi, execute SIM
46-02.
2) AL-2030/2040CS
Select the mode to be adjusted with the exposure mode selectkey. Set the exposure level to 3 for all adjustment. (Except forthe auto mode.)
2) AL-2050CS
Select the mode to be adjusted with the exposure key. Set theexposure level to 3 (center) for all adjustment. (Except for theauto mode.)
3) Make a copy.Check the adjustment level (shown in the above table) of theexposure test chart (Sharp Gray Scale).
(When too bright): Decrease the value displayed on the copyquantity display.
(When too dark): Increase the value displayed on the copy quan-tity display.
∗ The value can be set in the range of 1 - 99.
3. High voltage adjustmentA. Main charger (Grid bias)Note:
• Use a digital multi meter with internal resistance of 10MΩ ormore measurement.
• After adjusting the grid LOW output, adjust the HIGH output. Donot reverse the sequence.
Procedures
1) Set the digital multi meter range to DC700V.
2) Set the positive side of the test rod to the connector CN11-3(GRID) of high voltage section of the power PWB and set thenegative side to the frame ground (power frame).
3) Execute SIM 8-2. (The main charger output is supplied for 30sec in the grid voltage HIGH output mode.)
4) Adjust the control volume (VRG1) so that the output voltage is580 ± 12V.
Adjustment mode
Exposure modedisplay lamp
Sharp gray chart adjustment level
Auto mode Auto lamp ON "3" is slightly copied.
Manual mode Manual lamp ON "3" is slightly copied.
Photo mode Photo lamp ON "3" is slightly copied.
Manual T/S mode
Manual lamp/Photo lamp ON "3" is slightly copied.
Auto T/S mode
Auto lamp/Photo lamp ON "3" is slightly copied.
Test chart
White paper
(1) (2)
Exposure mode select key/display lamp
[Exposure mode selector] key/display lamp
(1)
(2)
(2) Exposure key
(1) Exposure mode, level displayTEXT | | | | |
Adjustment mode
Display item
LEDSharp gray chart adjustment level
Auto mode AE COPY mode lamp "3" is slightly copied.
Text mode TEXT PRINT mode lamp "3" is slightly copied.
Photo mode PHOTO SCAN mode lamp "3" is slightly copied.
Text T/S mode TSTXT PRINT mode lampSCAN mode lamp
"3" is slightly copied.
Auto T/S mode TSAE COPY mode lampSCAN mode lamp
"3" is slightly copied.
Sharp Gray Scale adjustment level
Non toner save mode
Toner save mode
1 10 W2 3 4 5 6 7 8 9
Slightly copied.
Not copied.
1 10 W2 3 4 5 6 7 8 9
Slightly copied.
Not copied.
VRG1
AL-2030/2040CS/2050CS ADJUSTMENTS 9 - 5
B. DV bias check
Procedures
1) Set the digital multi meter range to DC500V.
2) Set the positive side of the test rod to the connector CN-10-1(DV BIAS) and set the negative side to the frame ground(power frame).
3) Execute SIM 8-1 to output the developing bias for 30sec, andcheck that the output is –400 ± 8V.
4. Duplex adjustmentA. Adjusting the paper reverse position in
memory for duplex copyingThis step adjusts the front surface printing (odd-number pages of adocument set) in the S-D mode copying and the leading edge posi-tion of an image on even-number pages in the D-S mode.
That is, it covers the adjustment of the second surface printingmode (image loss at the front edge of an image) in which imagedata is once stored in memory.
The image data is read, starting from its front end in the documentdelivery direction (Reference direction of document setting in theOC mode)and stored in memory.
This stored image data is printed starting at the printing start posi-tion, in the order of last-stored data to the first-stored data.
In other words, the front edge image loss of the image can beadjusted by changing the document read end position.
(Adjustment procedure)
1) Preparing test chart (Draw a scale at the rear end of one side ofa sheet of A4 white paper or letter paper)
2) Set the test chart so that the scale is positioned as shownbelow, in the S-D mode and the D-S mode.
3) Execute simulation 50-18.
Select the SPF/RSPF memory reverse output position, andpress [START] key to make a copy.
Adjust the setting so that the front edge image loss is less than4.0 mm in the SPF/RSPF mode.An increase of 1 in setting represents an increase of 0.1 mm inimage loss.
B. Adjusting trailing edge void in duplex copy mode
This is the adjustment of the first surface printing mode (rear endvoid) in duplex copying.
In a duplex copying operation, the paper is delivered starting fromthe rear end of the first printing surface. It is therefore necessary tomake a void area at the rear end on the first printing surface to pre-vent paper jam at the fusing part.
There are two adjustment modes:
1) Paper trailing edge void quantity 50-19 (TEXT)This adjustment is made when the cassette paper size is rec-ognized. The trailing edge void quantity can be adjusted bychanging the trailing edge image laser OFF timing.
Note: • A digital multi meter with internal resistance of 1GΩ mustbe use for correct check.
• The adjustment volume is locked, and no adjustment canbe made.
VRDV
5 10
Mode Display item Default LEDOC memory reverse output position
OC 50 COPY mode lamp
SPF/RSPF memory reverse output position
SPF 50 PRINT mode lamp
Scale (S-D mode) Scale (D-S mode)
5 10
The front edge of thescale on test chart
Front edge of paper
Void area
less than 4 mm
2nd printing surface where scale is printed (lower side)
AL-2030/2040CS/2050CS ADJUSTMENTS 9 - 6
2) Print start position (Duplex back surface) (SPF/RSPF) 50-19(PHOTO)The size (length) of a document read from the SPF/RSPF isdetected, the image at the trailing edge of the first printing sur-face is cut to make a void area. (The adjustment of void quantityat the time when the cassette paper size is not recognized.)
The paper void quantity should be first adjusted before the imagecut trailing edge void quantity (SPF/RSPF) is adjusted.
(Adjustment procedure)
(1) Paper trailing edge void quantity1) Preparing test chart (Draw a scale at the rear end of one side
of a sheet of A/4 white paper or letter paper)
2) Set the test chart on the document glass as shown below.
3) Using the user simulation [18], set the paper size of the firstcassette.
• Letter paper: 4
• A4 paper: 3
4) Execute SIM 50-19 to turn on the TEXT lamp (or PRINT modelamp for the AL-2050CS) and make the printing mode in OC-Dmode.Make a copy of the test chart to check the void area of the scaleon the image.
Adjust the setting so that the void area is 4 - 5 mm. An increase in1 of setting represents 0.1 mm in void area.
(2) Print start position (Duplex back surface)1) Set the test chart so that the scale is positioned as shown
below.
2) Execute SIM 50-19 to turn on the PHOTO lamp (or SCAN modelamp for the AL-2050CS) and make the printing mode in the S-D mode.
3) Remove and reinsert the cassette.
Note: Make sure to carry out this step before making a copy dur-ing this adjustment.
4) Make a copy and check the void area of the scale on theimage.Adjust the setting so that the void area is 2 - 4 mm. Anincrease of 1 in setting represents an increase of 0.1 mm invoid area.Void position to be checked
5. SPF/RSPF scan position automatic adjustment
Place a A4 paper (white chart) so that it covers the SPF scan glassand the OC glass together, and close the SPF/RSPF.
When simulation 53-08 is executed, the current adjustment value isdisplayed as the initial display.
* Default is 1. Adjustment range is 1 – 99. Adjustment unit 1 =about 0.127mm
* If the values are kept as the default values, SPF/RSPF scan isnot performed properly. The front area of the proper scan positionmay be scanned.
In case of AUTO, press [START] key, and the mirror unit scans fromthe home position to the SPF/RSPF scan position with the adjust-ment value displayed. The SPF glass cover edge position is calcu-lated from the difference between the SPF glass cover edge andthe OC side document glass CCD output level. If the adjustment isnormal, the adjusted value is displayed. If abnormal, the error LEDlights up with the current set value displayed.
During the error LED is lighted, when [START] key is pressed again,execution is performed again.
Operation
The operation is similar to simulation 46-01. (In MANUAL)OK/ERR display in AUTO (AL-2050CS only)
Document guide The trailing edge has a scale
Table glass
The trailing edge void on the first printing surface is shown above.
Paper
Void position to be check
Scale (S-D mode)
ModeDisplay
itemDefault LED
SPF/RSPF scan position auto adjustment
AUTO 1 AE mode lamp (AL-2030/2040CS)COPY mode lamp (AL-2050CS)
SPF/RSPF scan position manual adjustment
MANU 1 TEXT mode lamp (AL-2030/2040CS)PRINT mode lamp (AL-2050CS)
<When OK> <When ERR>
53-08 SPF AUTOAUTO 100% ** OK
53-08 SPF AUTOAUTO 100% ** ERR
6cm or more is required.
AL-2030/2040CS/2050CS ADJUSTMENTS 9 - 7
6. SPF/RSPF mode sub scanning direction magnification ratio adjustment
Note: Before performing this adjustment, be sure to check that theOC mode adjustment in copying has been completed.
1) Put a scale on the original table as shown below, and make anormal copy (100%) on the front and the back surfaces tomake a test chart.
Note: Since the printed copy is used as a test chart, put the scalein paralled with the edge lines.
2) Set the test chart on the SPF and make a copy in the normalratio (100%). (AL-2030/2040CS)
Set the test chart on the RSPF and make a duplex copy (D-D orD-S) in the normal ratio (100%). (AL-2050CS)
3) Compare the scale image and the actual image.If necessary, perform the following adjustment procedures.
4) Execute SIM 48-05.
5) The current sub scanning direction magnification ratio correc-tion value is displayed in two digits on the display section.
6) Enter the set value and press the [START] key.
When adjusting the RSPF, use [2-SIDED COPY] key to selectsingle/duplex after entering the one page print mode, perform-ing 2-page single copy.
∗ When there is no document in SPF/RSPF, copy is inhibited.
<Adjustment specification>
7. Automatic black level correctiona. Cases when the adjustment is required
1) When the main PWB is replaced.
2) When the EEPROM in the main PWB is replaced.
3) When "U2" trouble occurs.
4) When repairing or replacing the optical section.
b. Adjustment procedure
Used to acquire the black level target value used for the black leveladjustment of white balance.
When SIM 63-02 is executed, the current correction value is dis-played in 3 digits of 12bit hexadecimal number.
Place the gray gradation chart (UKOG-0162FCZZ) used as thecorrection document so that the density 10 (black side) comes onthe left side and that the chart is upside down at the center of theplate left center.
When START key is pressed, the mirror base unit scans the chartand calculates the correction value.
After completion of correction, the corrected value is displayed onthe display section.
∗ Default: 0
∗ If the value is set to the default, operation is made with 0x60.
AL-2050CS only
c. Operation
1) Initial display
2) [ENTER]/[START] key: Correction start
<During canceling - When [Clear]/[Clear All] key is pressed->
After canceling, the machine goes into the sub code entry standbymode.
3) After execution
3) In case of an error
ModeDisplay item (AL-2050CS)
Default LED
Sub scan magnification ratio adjustment on the surface of SPF/RSPF document
SIDE1 50 AE mode lamp (AL-2030/2040CS)COPY mode lamp (AL-2050CS)
Sub scan magnification ratio adjustment on the surface of RSPF document (AL-2050CS only)
SIDE2 50 PRINT mode lamp
Adjustment mode Spec value SIM Set valueSetting range
Sub scanning direction magnification ratio (SPF/RSPF mode)
At normal: ±1.0%
48-5 Add 1: 0.1% increaseReduce 1: 0.1% decrease
1 – 99
63-02 BLACK LEVEL 0
63-02 BLACK LEVELEXECUTING...
THE JOB IS BEINGCANCELED.
63-02 BLACK LEVEL *** OK
63-02 BLACK LEVEL *** ERR
Chart back surface
10
AL-2030/2040CS/2050CS ADJUSTMENTS 9 - 8
[10] SIMULATION, TROUBLE CODES
1. Entering the simulation modeTo enter the serviceman simulation mode, press the keys as fol-lows:
AL-2030/AL-2040CS
[Clear] key → Exposure mode selector key → [Clear] key → Exposure mode selector key
AL-2050CS
[#] key → [∗] key → [Clear] key → [∗] key
To cancel the simulation mode, press the [Clear All] key.
2. Key ruleAL-2030/AL-2040CS
AL-2050CS
3. List of simulations
[ ] [ ] key: Entry of MAIN CODE/SUB CODESetting of the adjustment values for the adjustment-related simulationsWhen [%] key is pressed simultaneously, the value is displayed in the descending sequence such as [0] → [9], not as [0] → [1].
[START] key: Settlement<In case of simulations for print>[START] key: Settlement / Print
[Exposure mode selector] key: Selection of an item
[Clear] key: (Interrupting operation check) Returns to the upper hierarchy.On the initial display (00-00), it terminates the simulation.Exits from the simulation mode.For a simulation of adjustment, the display returns to the initial display (00-00).
[Numeric] key: Entry of MAIN CODE/SUB CODESelection of an itemSetup of an adjustment value in case of simulations for adjustment
[ ] [ ] key: Selection of MAIN CODE/SUB CODESelection of an item
[ENTER]/[START] key: Settlement<In case of simulations for print>[ENTER] key: Settlement (Without print)[START] key: Settlement / Print
[Clear] key: (Interrupting operation check) Returns to the upper hierarchy.In case of simulation of operation check, terminates the operations.
[Clear All] key: Exits from the simulation mode.For a simulation of adjustment, the display returns to the initial display (00-00).
Sim No.
Sub code
Operation
01 01 Mirror scan operation02 Mirror home position sensor (MHPS) status display06 Aging of mirror scanning
02 01 SPF/RSPF aging operation02 SPF/RSPF sensor status display03 SPF/RSPF Motor ON06 Resist clutch ON (SPF) (AL-2030/2040CS only)08 RSPF paper feed solenoid operation check
(AL-2050CS only)09 RSPF reverse solenoid operation check
(AL-2050CS only)03 03 Shifter operation check (AL-2050CS only)05 01 Operation panel display check
02 Fusing lamp, cooling fan operation check03 Copy lamp ON
06 01 Paper feed solenoid ON02 Resist solenoid ON
07 01 Warm-up display and aging with jam06 Intermittent aging08 Shift to copy with the warm-up display
08 01 Developing bias02 Main charger (Grid high)03 Grid voltage (Low)06 Transfer charger
09 01 Duplex motor normal rotation operation check (AL-2040CS/2050CS only)
02 Duplex motor reverse operation check (AL-2040CS/2050CS only)
04 Duplex motor rotation speed adjustment (AL-2040CS/2050CS only)
10 Toner motor aging14 Cancel of troubles other than U216 Cancel of U2 trouble22 04 JAM total counter display
05 Total counter display08 SPF/RSPF counter display12 Drum counter display14 ROM version display16 Duplex counter display (AL-2040CS/2050CS only)17 Copy counter display18 Printer counter display19 Scanner mode counter display
(AL-2040CS/2050CS only)21 Scanner counter display22 SPF/RSPF JAM counter display
24 01 JAM total counter clear04 SPF/RSPF counter clear05 Duplex counter clear (AL-2040CS/2050CS only)07 Drum counter clear08 Copy counter clear09 Printer counter clear13 Scanner counter clear14 SPF/RSPF JAM total counter clear15 Scanner mode counter clear
(AL-2040CS/2050CS only)25 01 Main motor operation check
(Cooling fan motor rotation check)10 Polygon motor ON
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 1
4. Descriptions of various simulations
Sim No.
Sub code
Operation
26 02 SPF/RSPF setup03 Second cassette setup04 Machine duplex setup06 Destination setup07 Machine conditions check20 Rear edge void setup30 CE mark support control ON/OFF38 Cancel of stop at drum life over39 Memory capacity check40 Polygon motor OFF time setup (Time required for
turning OFF after completion of printing)42 Transfer ON timing control setup43 Side void setup54 γ life correction setting62 Energy-save mode copy lamp setup
30 01 Paper sensor status display41 06 OC cover float detection level adjustment
07 OC cover float detection margin setting43 01 Fusing temperature setting (Normal copy)
04 Fusing temperature setting in multi copy05 Fusing temperature setup in duplex copy
(AL-2040CS/2050CS only)14 Fusing start temperature setting
46 01 Copy density adjustment (300dpi)02 Copy density adjustment (600dpi)18 Image contrast adjustment (300dpi)19 Exposure mode setup20 SPF/RSPF exposure correction
Sim No.
Sub code
Operation
46 29 Image contrast adjustment (600dpi)30 AE limit adjustment31 Image sharpness adjustment32 Copier color reproduction setup
48 01 Front/rear (main scanning) direction and scan (sub scanning) direction magnification ratio adjustment
05 SPF/RSPF mode sub scan direction magnification ratio in copying
49 01 Flash ROM program writing mode50 01 Lead edge image position
06 Copy lead edge position adjustment (SPF/RSPF)10 Center offset adjustment12 Document off-center adjustment18 Memory reverse position adjustment in duplex
copy (AL-2040CS/2050CS only)19 Duplex copy rear edge void adjustment
(AL-2040CS/2050CS only)51 02 Resist quantity adjustment53 08 SPF/RSPF scan position automatic adjustment61 03 Polygon motor check (HSYNC output check)63 01 Shading check
02 Black level automatic correction12 Light quantity stabilization wait time setting13 Light quantity stabilization band setting
64 01 Self print67 50 USB receive speed adjustment (USB1.1)
(AL-2030/2040CS only)
Main code
Sub code
Contents Details of function/operation
1 01 Mirror scan operation [Function]When [ENTER]/[START] key is pressed, the home position is checked and the mirror base per-forms full scan at the speed of the set magnification ratio.
During operation, the set magnification ratio is displayed.
The mirror home position sensor status is displayed with the "Drum replacement required lamp(or the copy mode indicator for the AL-2050CS)". (When the mirror is in the home position, thelamp lights up.)
During operation, the copy lamp lights up.
When [Clear] key is pressed, if the operation is on the way, it is terminated and the machinegoes to the sub code entry standby mode.
[Operation] (AL-2050CS only)
02 Mirror home position sensor (MHPS) status display
[Function]Monitors the mirror home position sensor, and makes the "Drum replacement required lamp (orthe copy mode indicator for the AL-2050CS)" turn on during the sensor ON status.
[Operation] (AL-2050CS only)
1) Initial display 2) [ZOOM] key
2) [ ] key
2) [ ] key
3) [ENTER]/[START] key
01-01 SCAN CHK - 100% +
01-01 SCAN CHK - 78% +
01-01 SCAN CHK - 99% +
01-01 SCAN CHK - 101% +
01-01 SCAN CHKEXECUTING... - 78% +
1) Initial display
01-02 MHP-SENSOREXECUTING...
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 2
1 06 Aging of mirror scanning [Function]When [ENTER]/[START] key is pressed, the mirror base performs full scan at the speed of theset magnification ratio.
During operation, the set magnification ratio is displayed.
After 3sec, the mirror base performs full scan again.
∗ When [ENTER]/[START] key is pressed once, the ready lamp remains OFF.The mirror home position sensor status is displayed on the "Drum replacement required lamp(or the copy mode indicator for the AL-2050CS)." (The lamp is ON when the mirror is in thehome position.)
During aging, the copy lamp is ON.
[Operation] (AL-2050CS only)The operation is similar to simulation 1-01.
2 01 SPF/RSPF aging operation [Function]When [ENTER]/[START] key is pressed, the set magnification ratio is obtained. For the SPF, thesingle-face document transport is performed. For the RSPF, the duplex document transport isperformed.
However, the operating conditions don't matter and the operation is not stopped even in case ofa jam. Also the magnification ratio is displayed on the LCD/display.
[Operation] (AL-2050CS only)The operation is similar to simulation 1-01.
02 SPF/RSPF sensor status display
[Function]The ON/OFF status of the SPF/RSPF sensors can be checked with the LCD/LED.When a sensor is ON, the sensor name is displayed on the LCD/LED.
[Operation] (AL-2050CS only)
03 SPF/RSPF Motor ON [Function]When [ENTER]/[START] key is pressed, the motor rotates for 10sec at the speed correspond-ing to the set magnification ratio.
[Operation] (AL-2050CS only)The operation is similar to simulation 1-01.
06 Resist clutch ON (SPF) (AL-2030/2040CS only)
When the [START] key is pressed, the SPF resist clutch (SRRC) repeats ON (500 ms) and OFF (500 ms) 20 times.
08 RSPF paper feed solenoid operation check (AL-2050CS only)
[Function]The RSPF paper feed solenoid (SPUS) repeats ON for 500ms and OFF for 500ms 20 times bythe use of the solenoid drive control Bios.
[Operation] (AL-2050CS only)
09 RSPF reverse solenoid operation check (AL-2050CS only)
[Function]The RSPF reverse solenoid (SPFS) repeats ON for 500ms and OFF for 500ms 20 times by theuse of the solenoid drive control Bios.
[Operation] (AL-2050CS only)
Main code
Sub code
Contents Details of function/operation
SensorDisplay item AL-2050CS
Display itemAL-2030/2040CS
Document set sensor SPID TD cartridge replacement required lamp
RSPF document transport sensor SPPD Misfeed lampRSPF paper feed cover open/close sensor
SDSW —
RSPF paper exit sensor SPOD —
1) Initial display 2) When the sensor is ON:
02-02 SPF SENSOR 02-02 SPF SENSORSPID SPPD SDSW SPOD
1) Initial display
02-08 SPF SPUS CHKEXECUTING...
1) Initial display
02-09 RSPF SPFS CHKEXECUTING...
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 3
3 03 Shifter operation check (AL-2050CS only)
[Function]The shifter is moved back and forth in four reciprocations.
[Operation] (AL-2050CS only)
5 01 Operation panel display check
[Function]<LED check mode (All ON/Individual ON)>When [ENTER]/[START] key is pressed, all the LCD's on the operation panel are turned ON (allpixels ON).After 5sec of ON, the machine goes into the sub code entry standby mode.When [Mode Select] key is pressed under the all ON state, the mode is shifted to the individualON mode, where the LED's are turned on one by one from the left upper end to the left lowerside then from the right upper side to the right lower side. (All the pixels of LCD are lightedsimultaneously.) After lighting all the LCD's sequentially, all the LCD's are lighted simulta-neously. After 5sec from lighting all the LCD's simultaneously, the machine goes into the subcode entry standby mode. (Cycle of individual ON mode: ON 300ms, OFF 20ms)
When [Clear] key is pressed in the LED check mode, the machine goes into the sub code entrystandby mode.When [START] key is pressed, the machine goes into the key input check mode.
<Key input check mode>When the machine goes into the key input check mode, the value display section indicates "– ––" (For the AL-2050CS, 0 of the LCD is indicated).When any key is pressed after pressing a key on the operation panel, "+1" is added to thevalue.Once a key is pressed, it is not recounted.When [START] key is pressed, counting is made and the machine goes into the LED ON checkmode (LED all ON status) after 3sec.When [Clear] key is pressed for the first time, it is counted. When it is pressed for the secondtime, the key check mode is retained as well as when another key is pressed.
(Note in the key input check mode)• Be sure to press [START] key at the last. (If it is pressed on the way, the machine goes into
the LED ON check mode.) (LED all ON status)
• Multi key input is ignored.
[Operation] (AL-2050CS only)<LED check mode (All ON/Individual ON)>
<Key input check mode>
02 Fusing lamp, cooling fan operation check
[Function]When [ENTER]/[START] key is pressed, the fusing lamp repeats ON for 500ms and OFF for500ms 5 times. During this period, the cooling fan motor rotates.
[Operation] (AL-2050CS only)
03 Copy lamp ON [Function]When [ENTER]/[START] key is pressed, the copy lamp turns ON for 5sec.
[Operation] (AL-2050CS only)
Main code
Sub code
Contents Details of function/operation
1) Initial display
03-03 SHIFTER CHKEXECUTING...
1) Initial display
2) When [Mode Select] key is pressed, the machine goes into the individual ON mode.
1) Initial display 2) [ENTER/START] key
05-01 LCD/LED CHK. 0
05-01 LCD/LED CHK. **
1) Initial display
05-02 HT LAMP CHKEXECUTING...
1) Initial display
05-03 C-LAMP CHKEXECUTING...
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 4
6 01 Paper feed solenoid ON [Function]When [ENTER]/[START] key is pressed, the selected paper feed solenoid repeats ON for500ms and OF for 500ms 20times.
When tray select key (or [Numeric] key or [ ] [ ] key for the AL-2050CS) is pressed, thepaper feed solenoid setting is switched.
[Operation] (AL-2050CS only)
02 Resist solenoid ON [Function]When [ENTER]/[START] key is pressed, the resist solenoid repeats ON for 500ms and OFF for500ms 20 times.
[Operation] (AL-2050CS only)
7 01 Warm-up display and aging with jam
[Function]Copying is repeated to make the set quantity of copies.When the simulation is executed, warm-up is started and warm-up time is added for every sec-ond from 0 and displayed.When warm-up is completed, addition is stopped. When [Clear All] key is pressed, the readylamp lights up.After that, enter the copy quantity with [ ] [ ] key (or [Numeric] key for the AL-2050CS) andpress [ENTER]/[START] key to repeat copying of the set quantity (interval 0sec).To cancel the simulation, turn off the power or execute a simulation which causes hardwarereset.
[Operation] (AL-2050CS only)
06 Intermittent aging [Function]Copying is repeated to make the set quantity of copies.When the simulation is executed, warm-up is performed and the ready lamp is lighted.Enter the copy quantity with the [ ] [ ] key (or [Numeric] key for the AL-2050CS) and press[ENTER]/[START] key, and copying is executed to make the set quantity of copies, and theready state is kept for 3sec, and copying is executed again to make the set quantity of copies.These operations are repeated.To cancel the simulation, turn off the power or execute a simulation which executes hardwarereset.
[Operation] (AL-2050CS only)
Main code
Sub code
Contents Details of function/operation
Code number Setting Remark0 CPFS11 CPFS2 Operation is possible only when No. 2 cassette is installed. 2 MPFS
1) Initial display 2) [Numeric] key or [ ] key
2) [Numeric] key or [ ] key
3) [ENTER]/[START] key
4) Returns to the initial display.
06-01 PSOL CHK0:CPFS1
06-01 PSOL CHK1:CPFS2
06-01 PSOL CHK2:MPFS
06-01 PSOL CHKEXECUTING...
1) Initial display
06-02 RES.R SOL CHKEXECUTING...
1) Initial display 2) After 10sec
07-01 W-UP/AGING 0
07-01 W-UP/AGING 10
1) Initial display (Basic display of copy)
READY TO COPY 100% A4 0
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 5
7 08 Shift to copy with the warm-up display
[Function]Enter the simulation code, and warm-up is started and warm-up time is counted for every sec-ond from 0 and displayed.When [Clear All] key is pressed during counting up, "0" is displayed on the display and countingis stopped. However, warm-up is continued.After completion of warm-up, counting is terminated. (The aging function is removed from simu-lation 7-01.)
[Operation] (AL-2050CS only)
8 01 Developing bias [Function]When [ENTER]/[START] key is pressed, the developing bias signal is turned ON for 30sec.
When, however, an actual output value is measured, use simulation 25-01.
After completion of this process, the machine goes into the sub code entry standby mode.
[Operation] (AL-2050CS only)
02 Main charger (Grid high) [Function]When [ENTER]/[START] key is pressed, the main charger is outputted for 30sec in the grid volt-age HIGH move.
After completion of this process, the machine goes into the sub code entry standby mode.
[Operation] (AL-2050CS only)
03 Grid voltage (Low) [Function]When [ENTER]/[START] key is pressed, the main charger is outputted for 30sec in the grid volt-age LOW move.
After completion of this process, the machine goes into the sub code entry standby mode.
[Operation] (AL-2050CS only)
06 Transfer charger [Function]When [ENTER]/[START] key is pressed, the transfer charger is outputted for 30sec.
After completion of this process, the machine goes into the sub code entry standby mode.
[Operation] (AL-2050CS only)
9 01 Duplex motor normal rotation operation check (AL-2040CS/2050CS only)
[Function]Use the duplex motor Bios to drive the duplex motor in the normal direction (paper exit direc-tion) for 30sec.
After completion of this process, the machine goes into the sub code entry standby mode.
[Operation] (AL-2050CS only)
02 Duplex motor reverse operation check (AL-2040CS/2050CS only)
[Function]Use the duplex motor Bios to drive the duplex motor in the reverse direction for 30sec.
After completion of this process, the machine goes into the sub code entry standby mode.
[Operation] (AL-2050CS only)
Main code
Sub code
Contents Details of function/operation
1) Initial display 2) After 10sec
07-08 W-UP C-MODE 0
07-08 W-UP C-MODE 10
1) Initial display
08-01 DVLP BIAS SET.EXECUTING...
1) Initial display
08-02 MHV(H) SET.EXECUTING...
1) Initial display
08-03 MHV(L) SET.EXECUTING...
1) Initial display
08-06 THV SET.EXECUTING...
1) Initial display
09-01 DPLX ROT.EXECUTING...
1) Initial display
09-02 DPLX ROT.REV.EXECUTING...
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 6
9 04 Duplex motor rotation speed adjustment (AL-2040CS/2050CS only)
[Function]When this simulation is executed, the currently set value is displayed.Enter the adjustment value with [ ] [ ] key (or [Numeric] key for the AL-2050CS) and press[ENTER]/[START] key. The entered value is stored and the machine goes into the sub codeentry standby mode. The greater the set value is, the higher the speed is. The smaller the setvalue is, the lower the speed is. (Setting range: 1 - 13, Default: 6)
[Operation]
10 Toner motor aging [Function]When [ENTER]/[START] key is pressed, the toner motor is rotated for 30sec.After completion of this process, the machine goes into the main code entry standby mode.
[Operation] (AL-2050CS only)
14 Cancel of troubles other than U2
[Function]Used to cancel troubles other than U2.∗ Cancel troubles such as H trouble which writes data into EEPROM, and perform hardware
reset.
[Operation] (AL-2050CS only)
16 Cancel of U2 trouble [Function]Used to cancel U2 trouble.When [ENTER]/[START] key is pressed, check sum of the total counter in the EEPROM isrewritten and hardware reset is made.
[Operation] (AL-2050CS only)
22 04 JAM total counter display [Function]The JAM total counter is displayed.
[Operation]
05 Total counter display [Function]The total counter value is displayed.
[Operation]
Main code
Sub code
Contents Details of function/operation
AL-2050CS
1) Initial display
2) [Numeric] key
3) [ENTER/START] key
AL-2040CS
1) Press [ ] [ ] key to change the code number.
2) Press [START] key to fix the code number.09-04 DPLX ROT.SPEED 6( 1-13)
09-04 DPLX ROT.SPEED 5( 1-13)
09-04 DPLX ROT.SPEED 5( 1-13)
1) Initial display
10-00 TONER MOTOREXECUTING...
1) Initial display
14-00 TRBL CANC.CLEARED
1) Initial display
16-00 U2 TRBL CANC.CLEARED
AL-2050CS
1) Initial display
AL-2030/2040CS
The count value is displayed in 3 digits X 2times repeatedly.
<Display example: 12345>22-04 JAM TTL CNT ***,***
012 → Blank → 345 → Blank → 0120.7s 0.3s 0.7s 1.0s 0.7s
AL-2050CS
1) Initial display
AL-2030/2040CS
The operation is similar to simulation 22-04.
22-05 TTL CNT ***,***
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 7
22 08 SPF/RSPF counter display [Function]The SPF/RSPF counter is displayed.
[Operation]
12 Drum counter display [Function]The drum counter is displayed.
[Operation]
14 ROM version display [Function]The P-ROM version is displayed.Press [ ] [ ] key (or [Numeric] key or [ ] [ ] key for the AL-2050CS) to switch the display version.
[Operation]
16 Duplex counter display (AL-2040CS/2050CS only)
[Function]The duplex counter is displayed.
[Operation]
17 Copy counter display [Function]The copy counter is displayed.
[Operation]
18 Printer counter display [Function]The printer counter is displayed.
[Operation]
Main code
Sub code
Contents Details of function/operation
AL-2050CS
1) Initial display
AL-2030/2040CS
The operation is similar to simulation 22-04.
22-08 SPF CNT ***,***
AL-2050CS
1) Initial display
AL-2030/2040CS
The operation is similar to simulation 22-04.
22-12 DRUM CNT ***,***
Code number Version Display item0 Main unit Program MAIN PROG.1 F-IMC Program F-IMC PROG.2 LCD DATA LCD DATA
AL-2050CS
1) Initial display
2) [Numeric] key or [ ] key
2) [Numeric] key or [ ] key
AL-2030/2040CS
The operation is similar to simulation 22-04.
22-14 ROM VER.MAIN PROG. 00.00
22-14 ROM VER.F-IMC PROG. 00.00
22-14 ROM VER.LCD DATA 00.00
AL-2050CS
1) Initial display
AL-2040CS
The count value is displayed in 3 digits X 2times repeatedly.
<Display example: 12345>22-16 DPLX CNT ***,***
012 → Blank → 345 → Blank → 0120.7s 0.3s 0.7s 1.0s 0.7s
AL-2050CS
1) Initial display
AL-2030/2040CS
The operation is similar to simulation 22-04.
22-17 COPIES CNT ***,***
AL-2050CS
1) Initial display
AL-2030/2040CS
The operation is similar to simulation 22-04.
22-18 PRT.CNT ***,***
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 8
22 19 Scanner mode counter display (AL-2040CS/2050CS only)
[Function]The scanner mode counter is displayed.
[Operation]
21 Scanner counter display [Function]The scanner counter is displayed.
[Operation]
22 SPF/RSPF JAM counter display
[Function]The SPF/RSPF JAM counter is displayed.
[Operation]
24 01 JAM total counter clear [Function]When [ENTER]/[START] key is pressed, the JAM total counter is cleared to 0 and "000,000" isdisplayed on the LCD/display.
[Operation]
04 SPF/RSPF counter clear [Function]When [ENTER]/[START] key is pressed, the SPF/RSPF counter value is cleared to 0 and"000,000" is displayed on the LCD/display.
[Operation]
05 Duplex counter clear (AL-2040CS/2050CS only)
[Function]When [ENTER]/[START] key is pressed, the duplex counter value is cleared to 0, and "000,000"is displayed on the LCD/display.
[Operation]
07 Drum counter clear [Function]When [ENTER]/[START] key is pressed, the drum counter value is cleared to 0, and "000,000"is displayed on the LCD/display.
[Operation]
Main code
Sub code
Contents Details of function/operation
AL-2050CS
1) Initial display
AL-2040CS
The operation is similar to simulation 22-16.
22-19 S-MODE CNT ***,***
AL-2050CS
1) Initial display
AL-2030/2040CS
The operation is similar to simulation 22-04.
22-21 SCAN CNT ***,***
AL-2050CS
1) Initial display
AL-2030/2040CS
The operation is similar to simulation 22-04.
22-22 S JAM CNT ***,***
AL-2050CS
1) Initial display
AL-2030/2040CS
The operation is similar to simulation 22-04.
24-01 JAM TTL CLR.CLEARED 000,000
AL-2050CS
1) Initial display
AL-2030/2040CS
The operation is similar to simulation 22-04.
24-04 SPF CLR.CLEARED 000,000
AL-2050CS
1) Initial display
AL-2040CS
The operation is similar to simulation 22-16.
24-05 DPLX CLR.CLEARED 000,000
AL-2050CS
1) Initial display
AL-2030/2040CS
The operation is similar to simulation 22-04.
24-07 DRUM CLR.CLEARED 000,000
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 9
24 08 Copy counter clear [Function]When [ENTER]/[START] key is pressed, the copy counter value is cleared to 0, and "000,000" isdisplayed on the LCD/display.
[Operation]
09 Printer counter clear [Function]When [ENTER]/[START] key is pressed, the printer counter value is cleared to 0, and "000,000"is displayed on the LCD/display.
[Operation]
13 Scanner counter clear [Function]When [ENTER]/[START] key is pressed, the scanner counter value is cleared to 0, and "000,000" is displayed on the LCD/display.
[Operation]
14 SPF/RSPF JAM total counter clear
[Function]When [ENTER]/[START] key is pressed, the SPF/RSPF JAM total counter value is cleared to 0,and "000,000" is displayed on the LCD/display.
[Operation]
15 Scanner mode counter clear (AL-2040CS/2050CS only)
[Function]When [ENTER]/[START] key is pressed, the scanner mode counter value is cleared to 0, and"000,000" is displayed on the LCD/display.
[Operation]
25 01 Main motor operation check (Cooling fan motor rotation check)
[Function]When [ENTER]/[START] key is pressed, the main motor (and the duplex motor in the case of aduplex model) is operated for 30sec.
To reduce toner consumption, if the developing unit is installed, the developing bias, the maincharger, and the grid are also outputted.
In this case, laser discharge is required when stopping the motor, the polygon motor is alsooperated at the same time. Check for installation of the developing unit. If it is not installed, thehigh voltage above is not outputted and only the motor is rotated.
To check the developing bias, install the developing unit.
After completion of 30sec operation, the machine goes into the sub code entry standby mode.
[Operation] (AL-2050CS only)
Main code
Sub code
Contents Details of function/operation
AL-2050CS
1) Initial display
AL-2030/2040CS
The operation is similar to simulation 22-04.
24-08 COPIES CLR.CLEARED 000,000
AL-2050CS
1) Initial display
AL-2030/2040CS
The operation is similar to simulation 22-04.
24-09 PRT.CLR.CLEARED 000,000
AL-2050CS
1) Initial display
AL-2030/2040CS
The operation is similar to simulation 22-04.
24-13 SCAN CLR.CLEARED 000,000
AL-2050CS
1) Initial display
AL-2030/2040CS
The operation is similar to simulation 22-04.
24-14 S JAM TTL CLR.CLEARED 000,000
AL-2050CS
1) Initial display
AL-2040CS
The operation is similar to simulation 22-16.
24-15 S-MODE CLR.CLEARED 000,000
1) Initial display
25-01 MAIN MOTOR CHKEXECUTING...
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 10
25 10 Polygon motor ON [Function]When [ENTER]/[START] key is pressed, the Bios is called to rotate the polygon motor for 30sec. After completion of 30sec operation, the operation is turned off with the Bios and the machinegoes into the sub code entry standby mode.
[Operation] (AL-2050CS only)
26 02 SPF/RSPF setup [Function]When this simulation is executed, the current set SPF/RSPF is displayed. Enter the code num-ber corresponding to the desired SPF/RSPF and press [ENTER]/[START] key to save the set-ting.
[Operation]
03 Second cassette setup [Function]When this simulation is executed, the current set second cassette is displayed. Enter the codenumber corresponding to the desired second cassette and press [ENTER]/[START] key to savethe setting.
[Operation]The operation is similar to simulation 26-02.
04 Machine duplex setup [Function]When this simulation is executed, the current set duplex is displayed. Enter the code numbercorresponding to the desired duplex and press [ENTER]/[START] key to save the setting.
[Operation]The operation is similar to simulation 26-02.
06 Destination setup [Function]When this simulation is executed, the current set destination is displayed. Enter the code number corresponding to the desired destination and press [ENTER]/[START] key to save the setting.
* Code number 2 cannot be selected.
[Operation]The operation is similar to simulation 26-02.
Main code
Sub code
Contents Details of function/operation
1) Initial display
25-10 LSU CHKEXECUTING...
Code number SPF/RSPF Display item0 SPF NO SPF OFF1 SPF YES SPF ON2 RSPF YES RSPF ON
AL-2050CS
1) The current set value isdisplayed.
2) [Numeric] key or [ ] key
2) [Numeric] key or [ ] key
3) [ENTER]/[START] key
AL-2030/2040CS
1) Press [ ] [ ] key tochange the code number.
2) Press [START] key to fixthe code number.
26-02 SPF/RSPF1:SPF ON (0- 2)
26-02 SPF/RSPF0:SPF OFF (0- 2)
26-02 SPF/RSPF2:RSPF ON (0- 2)
26-02 SPF/RSPF2:RSPF ON (0- 2)
Code number Second cassette Display item0 Second cassette NO OFF1 Second cassette YES ON
* AL-2030: cannot be executed.
Code number Duplex Display item0 Duplex NO OFF1 Duplex YES* ON
Code number Destination Display item0 Inch series INCH1 EX Japan AB series AB2 Japan AB series –
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 11
26 07 Machine conditions check [Function]When this simulation is executed, the current machine setting is displayed.
[Operation] (AL-2050CS only)
20 Rear edge void setup [Function]When this simulation is executed, the current set rear edge void is displayed. Enter the codenumber corresponding to the desired rear edge void and press [ENTER]/[START] key to savethe setting.
[Operation]The operation is similar to simulation 26-02.
30 CE mark support control ON/OFF
[Function]When this simulation is executed, the current set CE mark support control is displayed. Enterthe code number corresponding to the desired CE mark support control and press [ENTER]/[START] key to save the setting.
[Operation]The operation is similar to simulation 26-02.
38 Cancel of stop at drum life over
[Function]When this simulation is executed, the current setup of the code number is displayed. Enter thecode number and press the PRINT switch to enable the setup.
[Operation]The operation is similar to simulation 26-02.
39 Memory capacity check [Function]When the simulation is executed, the currently installed SDRAM of the main unit is displayed.
[Operation] (AL-2050CS only)
40 Polygon motor OFF time setup (Time required for turning OFF after completion of printing)
[Function]When this simulation is executed, the current setting is displayed. Enter the code number corre-sponding to the desired setting and press [ENTER]/[START] key to save the setting.
[Operation]The operation is similar to simulation 26-02.
Main code
Sub code
Contents Details of function/operation
CPM Copy quantity Remark20 CPM 20
1) The machine setting is displayed.
26-07 CPM20 CPM
Code number Setting Display item Remark0 Rear edge void NO OFF1 Rear edge void YES ON Default
Code number Setting Display item Remark0 CE mark support control OFF OFF Default (100V series)1 CE mark support control ON ON
Code number Setup0 Stop at drum life over * Default (AL model)1 Cancel of stop at drum life over
Code number Setting Remark8 8 MBYTE16 16 MBYTE
1) Memory capacity display
26-39 MEM.CHK8 MBYTE
Code number SettingDisplay item
RemarkAL-2050CS AL-2030/2040CS
0 0sec 0 SEC. 01 30sec 30 SEC. 30 Default2 60sec 60 SEC. 603 90sec 90 SEC. 90
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 12
26 42 Transfer ON timing control setup
[Function]
[Operation] (AL-2050CS only)
Main code
Sub code
Contents Details of function/operation
AL-2030/2040CS
When this simulation is executed, the currently set code number is displayed.
Enter the code number and press the [START] key, and the setting will be changed. (For anynumber different from the following ones, the default time is automatically set.)
<Paper lead edge adjustment table>
* The default value, "11," of the transfer ON timing indicates "236msec passed from PSrelease."
* When set to "0," it is same as setting to the default, "11."
* The transfer ON timing can be adjusted to 236msec ± 2ms.
AL-2050CS
For the AL-2050CS, the adjustment can be made individually for each of the following modes.
<Paper lead edge adjustment table> is the same as that of the AL-2030/2040CS above.
<Front/back surface of paper rear edge adjustment table>
* The default "50" of the transfer OFF timing indicates "210msec passed from PPD1OFF."
* The transfer OFF timing can be adjusted to 210msec ± 2ms.
Code number Setting Code number Setting0 Default (236 msec) 11 Default (236 msec)1 –20 msec 12 +2 msec2 –18 msec 13 +4 msec3 –16 msec 14 +6 msec4 –14 msec 15 +8 msec5 –12 msec 16 +10 msec6 –10 msec 17 +12 msec7 –8 msec 18 +14 msec8 –6 msec 19 +16 msec9 –4 msec 20 +18 msec
10 –2 msec 21 +20 msec
Mode Display item Default Setting rangeFront surface paper lead edge F-REAR 11 0 - 21Front surface paper rear edge F-END 50 1 - 99Back surface paper lead edge B-REAR 11 0 - 21Back surface paper rear edge B-END 50 1 - 99
Code Setting Remark1 –98 msec
. . . . . .49 –2 msec50 0 msec Default51 +2 msec. . . . . .99 +98 msec
1) Initial display <Front surface lead edge setting>
2) [ ] [ ] key: Mode selection
3) [Numeric] key: Value entry
4) [ENTER]/[START] key: Settles the entered value. The display isshifted to the sub code input standbymenu.
26-42 TC ON TIMINGF-REAR 11( 0-21 )
26-42 TC ON TIMINGF-END 50( 1-99 )
26-42 TC ON TIMINGF-END 51( 1-99 )
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 13
26 43 Side void setup [Function]When this simulation is executed, the currently set code of the side void quantity is displayed(initial display), and the set data are saved. (Setting range: 0 – 10, Default: 4 (= One side2.0mm))
* When the adjustment value is increased by 1, the side void is changed as follows:Side void adjustment: The side void is increased by 0.5mm. (The side void of "Set value x0.5mm" is made.)
[Operation]The operation is similar to simulation 09-04.
54 γ life correction setting [Function]Used to set the γ life correction.
When this simulation is executed, the current set code number is displayed.
Enter the desired code number and press [ENTER]/[START] key to save the setting. (Setting range: 0 – 1, default: 1)
[Operation]The operation is similar to simulation 26-02.
62 Energy-save mode copy lamp setup
[Function]Used to set half-ON /OFF of the copy lamp in the pre-heat mode.
When this simulation is executed, the current set code number is displayed. Enter the desiredcode number and press [ENTER]/[START] key to save the setting.
[Operation]The operation is similar to simulation 26-02.
30 01 Paper sensor status display [Function]The paper sensor status is displayed on the LCD/LED.
∗ Since the manual paper feed sensor is a single bypass sensor, its status is not displayed.∗ The width sensor is available only in the FAX models.
[Operation] (AL-2050CS only)
Main code
Sub code
Contents Details of function/operation
Code Setting Remark0 0 mm1 0.5 mm2 1.0 mm3 1.5 mm4 2.0 mm Default5 2.5 mm6 3.0 mm7 3.5 mm8 4.0 mm9 4.5 mm
10 5.5 mm
Code number Setting Display item Remark0 OFF OFF1 ON ON Default
Code number Setting Display item Remark0 Copy lamp OFF OFF1 Copy lamp half-ON ON Default
SensorDisplay item (AL-2050CS)
Display lamp (AL-2030/2040CS)
Paper exit sensor POD Photoconductor cartridge replacement lampPaper entry sensor PPD1 Developer cartridge replacement lampDuplex sensor PPD2 JAM lamp No. 2 tray paper feed sensor PPD3 2nd cassette lamp New drum cartridge sensor DRST Zoom lamp
1) Initial display 2) When sensor ON
30-01 P-SENSOR 30-01 POD PD1 PD2PPD1 PPD2 PPD3 DRST
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 14
41 06 OC cover float detection level adjustment
[Function]When this simulation is executed, the current set value is displayed. When [ENTER]/[START]key is pressed, the mirror base unit moves to the SPF/RSPF scan position to acquire the OCcover float detection level.
When the mirror base unit returns to the home position, the acquired value is displayed.
If the adjustment is NG, the following message is displayed.
AL-2030/2040CS: Misfeed lamp lights up, and the 7seg display remains unchanged.
AL-2050CS: The LCD indicates "ERR."
Note that, this simulation must be executed with the OC cover closed.∗ If the value is 0, float detection is not performed in normal jobs.
[Operation] (AL-2050CS only)
07 OC cover float detection margin setting
[Function]For the number of pixels between black markers on the SPF/RSFP scanning position saved in"41-06: (OC cover float detection level adjustment)", if the number of pixels between the mark-ers when processing float detection is less than the number of pixels set with this simulation, itis judged as the float error.
When the set value of this simulation is "0," no float error occurs.
When this simulation is executed, the current set value is displayed.
Enter the adjustment value with [ ] [ ] key (or [Numeric] key for the AL-2050CS), and press[START] key. The setting is saved and the display is shifted to the sub code input standby menu. Setting range: 0 – 99 (Copes with margin 0 – 99 pixels.)
Default: 30 (30 pixels)
[Operation]The operation is similar to simulation 9-04.
Main code
Sub code
Contents Details of function/operation
1) Initial display
2) [ENTER/START] key
41-06 OC FLOAT LEVEL 0
41-06 OC FLOAT LEVELEXECUTING...
<Canceling - when [Clear]/[Clear All] key is pressed->
After canceling, the machine goes into the sub code entrystandby mode.
3) When the level is acquired:
3) When the level is not acquired:
THE JOB IS BEINGCANCELED.
41-06 OC FLOAT LEVEL **** OK
41-06 OC FLOAT LEVEL **** ERR
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 15
43 01 Fusing temperature setting (Normal copy)
[Function]Used to set the fusing temperature of 3rd or later sheet. (For 1st and 2nd sheets, SIM 43-14 isused.)
When this simulation is executed, the current set code number is displayed. Press [ ] [ ] key(or [Numeric] key for the AL-2050CS) to change the setting and press [ENTER]/[START] key tosave the setting into the EERPOM. The machine goes into the sub code entry standby mode.
The [Exposure mode selector] key (or [ ] [ ] key for the AL-2050CS) is used to select themode.
[Operation]
04 Fusing temperature setting in multi copy
[Function]For 20th sheet or later in multi copy, the fusing temperature is automatically changed from thetemperature set with simulation 43-1 to the temperature set with this simulation.
When this simulation is executed, the current set code number is displayed. Enter the codenumber and press [ENTER]/[START] key to change the setting.
∗ The cassette feed and the manual feed are controlled similarly.
[Operation]The operation is similar to simulation 43-01.
Main code
Sub code
Contents Details of function/operation
* The cassette feed and the manual feed are controlled similarly.
Code Set temperature (°C) Remark Code Set temperature (°C) Remark0 170 5 195 Default1 175 6 2002 180 7 2053 185 8 2104 190
ModeDisplay item (AL-2050CS)
Display item(AL-2030/2040CS)
Main cassette paper feed & 2nd cassette paper feed TRAY1 AE mode lamp Manual paper feed MFT TEXT mode lamp
AL-2050CS
1) Initial display <Main cassette paper feed& 2nd cassette paper feed setting>
2) [ ] [ ] key: Mode selection
3) [Numeric] key: Value entry
4) [ENTER]/[START] key
Settles the entered value. The display isshifted to the sub code input standbymenu.
AL-2030/2040CS
1) Press [Exposure mode selector] key tochange the mode.
2) Press [ ] [ ] key to set the value.
3) Press [START] key to fix the code number.
43-01 FU TEMPTRAY1 6( 0-8 )
43-01 FU TEMPMFT 6( 0-8 )
43-01 FU TEMPMFT 6( 0-8 )
Code Set temperature (°C) Remark0 1651 1702 1753 1804 1855 1906 1957 200
ModeDisplay item (AL-2050CS)
Display lamp(AL-2030/2040CS)
Default
Main cassette paper feed & 2nd cassette paper feed
TRAY1 AE mode lamp 3
Manual paper feed MFT TEXT mode lamp 3Main cassette paper feed & 2nd cassette paper feed (small-size)
TRAY1 SH PHOTO mode lamp 1
Manual paper feed (small-size) MFT SH AE mode lampTEXT mode lamp
1
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 16
43 05 Fusing temperature setup in duplex copy (AL-2040CS/2050CS only)
[Function]In the case of duplex copy, the shift temperature set with this simulation is applied to the fusingtemperature.When this simulation is executed, the current set code number is displayed. Enter the desired code number and press [ENTER]/[START] key to save the setting.
[Operation]The operation is similar to simulation 26-02.
14 Fusing start temperature setting
[Function]When this simulation is started, the currently set code number is displayed.Press [ ] [ ] key (or [Numeric] key or [ ] [ ] key for the AL-2050CS) to switch the setting,and press [ENTER]/[START] key to save it to the EEPROM. The machine goes to the sub codeentry standby mode.
[Operation]The operation is similar to simulation 43-01.
Main code
Sub code
Contents Details of function/operation
Code Shift temperature (°C) Remark0 ±0 Default1 –82 –63 –44 –25 ±06 +27 +48 +69 +8
Code Set temperature (°C) Remark0 1601 1652 1703 1754 1805 1856 1907 195 Default8 2009 20510 210
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 17
46 01 Copy density adjustment (300dpi)
[Function]Copy density is set for each mode.When this simulation is executed, the current se value is displayed in 2 digits (Default: 50).Change the set value and press [START] key to make a copy under the set value.When the set value is increased, the copy becomes darker. When the set value is decreased,the copy becomes lighter.In this case, only Exp.3 copy is made. When, however, the setting is made to make darker copy,Exp.1 and Exp.5 copies also become darker. When made to lighter copy, Exp1. and Exp.5 cop-ies become lighter, too.Press [Exposure mode selector] key (or [ ] [ ] key for the AL-2050CS) to switch the mode.The set value of the selected mode is displayed on the LCD/display. (Adjustment value: 1 – 99) The setting procedure of the magnification ratio is the same as that to copy operation.
[Operation]
02 Copy density adjustment (600dpi)
[Function]Copy density is set for each mode.When this simulation is executed, the current se value is displayed in 2 digits (Default: 50).Change the set value and press [START] key to make a copy under the set value.When the set value is increased, the copy becomes darker. When the set value is decreased,the copy becomes lighter.In this case, only Exp.3 copy is made. When, however, the setting is made to make darker copy,Exp.1 and Exp.5 copies also become darker. When made to lighter copy, Exp1. and Exp.5 cop-ies become lighter, too.Press [Exposure mode selector] key (or [ ] [ ] key for the AL-2050CS) to switch the mode.The set value of the selected mode is displayed on the LCD/display. (Adjustment value: 1 – 99)
[Operation]The operation is similar to simulation 46-01.
Main code
Sub code
Contents Details of function/operation
ModeDisplay item (AL-2050CS)
LED(AL-2050CS)
Display lamp(AL-2030/2040CS)
Default
AE mode (300dpi) AE COPY mode lamp AE mode lamp 50TEXT mode (300dpi) TEXT PRINT mode lamp TEXT mode lamp 50PHOTO mode PHOTO SCAN mode lamp PHOTO mode lamp 50TS mode (TEXT) (300dpi) TSTXT PRINT mode lamp
SCAN mode lampTEXT mode lampPHOTO mode lamp
50
TS mode (AE) (300dpi) TSAE COPY mode lampSCAN mode lamp
AE mode lampPHOTO mode lamp
50
AL-2050CS1) Initial display
2) [ ] key: Mode selection
2) [ ] key: Mode selection
3) [Numeric] key: Value entry
4) [START] key: Fixing and printing value (No change on the LCD)
* Print is started in the set mode.
4) To fix the set value without printing, press[Enter] key.
* To cancel manual feed paper empty MSG,press any key.
* When performing the AE mode exposureadjustment, place the test chart on the docu-ment table so that the center area of 10cm isnot covered.
AL-2030/2040CS1) Press [Exposure mode selector] key to
change the mode.
2) Press [ ] [ ] key to set the value.
3) [START] Fixing and printing value
* Print is started in the set mode.
46-01 EXP.LEVEL 300AE 100% 50( 1-99)
46-01 EXP.LEVEL 300TSAE 100% 50( 1-99)
46-01 EXP.LEVEL 300TEXT 100% 50( 1-99)
46-01 EXP.LEVEL 300AE 100% 62( 1-99)
46-01 EXP.LEVEL 300AE 100% 62( 1-99)
46-01 EXP.LEVEL 300AE 100% 62( 1-99)
ModeDisplay item (AL-2050CS)
LED(AL-2050CS)
Display lamp(AL-2030/2040CS)
Default
AE mode (600dpi) AE COPY mode lamp AE mode lamp 50TEXT mode (600dpi) TEXT PRINT mode lamp TEXT mode lamp 50PHOTO mode PHOTO SCAN mode lamp PHOTO mode lamp 50TS mode (TEXT) (600dpi) TSTXT PRINT mode lamp
SCAN mode lampTEXT mode lampPHOTO mode lamp
50
TS mode (AE) (600dpi) TSAE COPY mode lampSCAN mode lamp
AE mode lampPHOTO mode lamp
50
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 18
46 18 Image contrast adjustment (300dpi)
[Function]Contrast is set for each mode.When this simulation is executed, the current se value is displayed in 2 digits (Default: 50).Change the set value and press [START] key to make a copy under the set value.When the set value is increased, the contrast becomes higher. When the set value isdecreased, the contrast becomes lower.In this case, only Exp.3 copy is made. When, however, the setting is made to make higher con-trast, Exp.1 and Exp.5 copies also become in higher contrast. When made to a lower contrast,Exp1. and Exp.5 copies become lower contrast, too.Press [Exposure mode selector] key (or [ ] [ ] key for the AL-2050CS) to switch the mode.The set value of the selected mode is displayed on the LCD/display. (Adjustment value: 1 – 99)
* No density display on LCD/display.
[Operation]The operation is similar to simulation 46-01.
19 Exposure mode setup [Function]<γ table setting>
When this simulation is executed, the code number of the current set gamma table is displayed.(Default: 2)Enter the code number corresponding to the desired gamma table, and press [Exposure modeselector] key (or [ ] [ ] key for the AL-2050CS) to change the mode and write into theEEPROM.
<AE operation mode>
When setting the γ table, press [Exposure mode selector] key (or [ ] key for the AL-2050CS)to change to the AE operation mode, and the current set code number of the AE operationmode is displayed. (Default: 0)Enter the code number corresponding to the desired AE operation mode and press [Exposuremode selector] key (or [ ] [ ] key for the AL-2050CS) to change the mode and write intothe EEPROM.
<PHOTO image process setting>
When [Exposure mode selector] key (or [ ] key for the AL-2050CS) is pressed in AE opera-tion mode setting, the mode is changed to the PHOTO image process setting and the codenumber of the current set PHOTO image process setting is displayed. (Default: 1)Enter the code number corresponding to the desired PHOTO image process setting and press[Exposure mode selector] key (or [ ] [ ] key for the AL-2050CS) to change the mode andwrite into the EEPROM.
[Operation]The operation is similar to simulation 43-01.
Main code
Sub code
Contents Details of function/operation
ModeDisplay item (AL-2050CS)
LED(AL-2050CS)
Display lamp(AL-2030/2040CS)
Default
AE mode (300dpi) AE COPY mode lamp AE mode lamp 50TEXT mode (300dpi) TEXT PRINT mode lamp TEXT mode lamp 50PHOTO mode PHOTO SCAN mode lamp PHOTO mode lamp 50TS mode (TEXT) (300dpi)
TSTXT PRINT mode lampSCAN mode lamp
TEXT mode lampPHOTO mode lamp
50
TS mode (AE) (300dpi)
TSAE COPY mode lampSCAN mode lamp
AE mode lampPHOTO mode lamp
50
ModeDisplay item (AL-2050CS)
Display lamp(AL-2030/2040CS)
Code number
Setting content Remark
γ GAMMA OFF1
Image quality priority mode
2Toner consumption priority mode
Default
AE AE AE 0 Lead edge stop Default1 Real time process
PHOTO PHOTO PHOTO1 Error diffusion process Default2 Dither process
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 19
46 20 SPF/RSPF exposure correction
[Function]Used to adjust the exposure correction amount in the SPF/RSPF mode. The adjustment ismade by adjusting Vref voltage variation for the OC mode.
When this simulation is executed, the current set value is displayed in 2 digits (Default: 50).Change the set value and press [START] key to save the setting and make a copy.
When the set value is increased, copy becomes darker. When the set value is decreased, copybecomes lighter. (Adjustment range: 1 – 99)
[Operation]The operation is similar to simulation 46-01.
29 Image contrast adjustment (600dpi)
[Function]Contrast is set for each mode.
When this simulation is executed, the current se value is displayed in 2 digits (Default: 50).
Change the set value and press [START] key to make a copy under the set value.
When the set value is increased, the contrast becomes higher. When the set value isdecreased, the contrast becomes lower.
In this case, only Exp.3 copy is made. When, however, the setting is made to make higher con-trast, Exp.1 and Exp.5 copies also become in higher contrast. When made to a lower contrast,Exp1. and Exp.5 copies become lower contrast, too.
Press [Exposure mode selector] key (or [ ] [ ] key for the AL-2050CS) to switch the mode.The set value of the selected mode is displayed on the LCD/display. (Adjustment value: 1 – 99)
* No density display on LCD/display.
[Operation]The operation is similar to simulation 46-01.
30 AE limit adjustment [Function]Used to set the limit value in AE and AE (toner save).Change the setting and press [ENTER]/[START] key to write the setting into the EEPROM. Themachine goes into the sub code entry standby mode.By pressing [Exposure mode selector] key (or [ ] [ ] key for the AL-2050CS), setting ischanged. (Setting range: 0 – 31, Default: 0)
<Remark>
When simulation 26-06 (Destination setting) or simulation 46-19 Auto Exposure mode ischanged, the setting of this simulation is also changed to the default in connection.
[Operation]The operation is similar to simulation 46-19.
Main code
Sub code
Contents Details of function/operation
ModeDisplay item(AL-2050CS)
Display lamp(AL-2030/2040CS)
Default Remark
RSPF/SPF SPF TEXT mode lamp 50
ModeDisplay item (AL-2050CS)
LED(AL-2050CS)
Display lamp(AL-2030/2040CS)
Default
AE mode (600dpi) AE COPY mode lamp AE mode lamp 50TEXT mode (600dpi) TEXT PRINT mode lamp TEXT mode lamp 50PHOTO mode PHOTO SCAN mode lamp PHOTO mode lamp 50TS mode (TEXT) (600dpi)
TSTXT PRINT mode lampSCAN mode lamp
TEXT mode lampPHOTO mode lamp
50
TS mode (AE) (600dpi) TSAE COPY mode lampSCAN mode lamp
AE mode lampPHOTO mode lamp
50
ModeDisplay item(AL-2050CS)
Display lamp(AL-2030/2040CS)
Remark
Limit value for AE AE AE mode lampLimit value for AE (toner save) TEXT TEXT mode lamp
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 20
46 31 Image sharpness adjustment
[Function]Used to adjust sharpening/blurring of image in each mode.
When this simulation is executed, warm-up and shading are performed and the current setvalue is displayed. (Default: 1)Change the set value and press [START] key to make a copy under the set conditions.To change the mode, press [Exposure mode selector] key (or [ ] [ ] key for the AL-2050CS). The code number of the selected mode is dip0slayed on the LCD/display.
[Operation]The operation is similar to simulation 46-01.
32 Copier color reproduction setup
[Function]Used to set color reproduction in each mode. Colors easy to be copied and colors difficult to becopied can be switched.
* This setting has virtually no effect on black-and-white documents.
When this simulation is executed, warm-up and shading are performed and the current setvalue is displayed. (Default: 0)Press [START] key to make a copy under the set conditions . At that time, color components arechanged for used in copying.To change the mode, press [Exposure mode selector] key (or [ ] [ ] key for the AL-2050CS). The code number of the selected mode is dip0slayed on the LCD/display.
[Operation]The operation is similar to simulation 46-01.
Main code
Sub code
Contents Details of function/operation
Image quality Setting No RemarkBlurring 0
Standard 1 DefaultSharpening 2
ModeDisplay item (AL-2050CS)
LED(AL-2050CS)
Display lamp(AL-2030/2040CS)
Default setting
AE mode AE COPY mode lamp AE mode lamp 1TEXT mode TEXT PRINT mode lamp TEXT mode lamp 1PHOTO mode PHOTO SCAN mode lamp PHOTO mode lamp 1TS mode (TEXT) TSTXT PRINT mode lamp
SCAN mode lampTEXT mode lampPHOTO mode lamp
1
TS mode (AE) TSAE COPY mode lampSCAN mode lamp
AE mode lamp PHOTO mode lamp
1
Set value Colors easy to be copied Colors difficult to be copied0 Purple, Blue, Red Yellow, Green, Water blue1 Water blue, Green, Blue Purple, Red, Yellow2 Yellow, Red, Green Blue, Water blue, Purple
Specification component Setting No RemarkGreen 0 DefaultRed 1Blue 2
ModeDisplay item (AL-2050CS)
LED(AL-2050CS)
Display lamp(AL-2030/2040CS)
Default setting
AE mode (including TS)
AE COPY mode lamp AE mode lamp 0
TEXT mode (including TS)
TEXT PRINT mode lamp TEXT mode lamp 0
PHOTO mode PHOTO SCAN mode lamp PHOTO mode lamp 0
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 21
48 01 Front/rear (main scanning) direction and scan (sub scanning) direction magnification ratio adjustment
[Function]Used to adjust the magnification ratio in the main scan (front/rear) direction and sub scan direc-tion.
Enter the adjustment value with [ ] [ ] key (or [Numeric] key for the AL-2050CS). Press[START] key to save the set value and make a copy. (When the adjustment value is increasedby 1, the magnification ratio is increased by 0.1%.)
The adjustment mode can be changed by pressing [Exposure mode selector] key (or [ ] [ ]key for the AL-2050CS). (Adjustment range: 1 – 99, Default: 50)
[Operation]The operation is similar to simulation 46-01.
05 SPF/RSPF mode sub scan direction magnification ratio in copying
[Function]Used to display the current SPF/RSPF mode sub scan direction magnification ratio on the LCD/display.
When [START] key is pressed, the entered data is acquired and saved into the EEPROM, and acopy is made. (When the set value is increased by 1, the magnification ratio is increased by0.1%.)
The adjustment mode can be changed by pressing [Exposure mode selector] key (or [ ] [ ]key for the AL-2050CS). (Adjustment range: 1 – 99, Default: 50)
When adjusting the RSPF, the mode is set to "Duplex → Single," single copies of two sheets areperformed.
For printing, regardless of the density mode and the density level,
Density mode = MANUALDensity level = 3
* When there is no document in SPF/RSPF, copy is inhibited.
[Operation]The operation is similar to simulation 46-01.
Main code
Sub code
Contents Details of function/operation
ModeDisplay item (AL-2050CS)
LED(AL-2050CS)
Display lamp(AL-2030/2040CS)
Default value
Main scan direction magnification ratio
F-R PRINT mode lamp TEXT mode lamp 50
OC mode sub scan direction magnification ratio
SCAN SCAN mode lamp PHOTO mode lamp 50
ModeInitial value of duplex setting
Display item (AL-2050CS)
LED(AL-2050CS)
Display lamp(AL-2030/2040CS)
Default
Sub scan magnification ratio adjustment on the front surface of SPF/RSPF document
S-S SIDE1 COPY mode lamp
AE mode lamp
50
Sub scan magnification ratio adjustment on the back surface of RSPF document (AL-2050CS only)
D-S SIDE2 PRINT mode lamp
— 50
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 22
49 01 Flash ROM program writing mode
[Function]When this simulation is executed, "d" is displayed on the display (or "DOWNLOAD MODE" isdisplayed on the LCD for the AL-2050CS), the machine goes into the program writing modefrom PC to Flash ROM.
Use the writing tool on the PC and write the program.
During writing, the display shows as follows:
After completion of download, turn OFF/ON the power to reset.
In case of an error in download, the following message is displayed on the LCD. (AL-2050CS only)
To enter the download mode, there is a method to use key operations as well as to use a simu-lation. With the power OFF, press and hold [Clear All] key + [ ] key, turn on the power.
[Operation] (AL-2050CS only)
Main code
Sub code
Contents Details of function/operation
* "∗" in an error display indicates the error position.
StatusAL-2050CS AL-2030/2040CS
RemarkDisplay item Display
Pre-heat lamp
Ready lamp
Download data receiving RECEIVING "d" ON ON OFFLoader function transfer LOADER COPYING AL-2050CS onlyDate delete start FLASH ERASE "d" ON OFF ONData write (Boot section) BOOT WRITING "d" ON Blink OFFData write (Program section)
PROGRAM WRITING "d" ON Blink Blink
Data write (EEPROM) E2PROM WRITING AL-2050CS onlyData write (LCD) LCD DATE WRITING AL-2050CS onlyDuring SUM CHECK FLASH ROM SUM
CHECK"d" ON ON ON
During BOOT SUM CHECK
BOOT SUM CHECK AL-2050CS only
During EEPROM SUM CHECK
EEPROM SUM CHECK AL-2050CS only
Download complete DOWNLOAD COMPLETE!
"0FF" ON OFF OFF
Error state "E ∗" ON OFF OFF AL-2030/2040CS only
1 Data reception error 6 Sum check (Loader section)2 Loader function transfer 7 Sum check (Boot section)3 FLASH ROM delete 8 Sum check (Program section)4 FLASH ROM writing (Boot section) 9 Sum check (EEPROM section)5 FLASH ROM writing (Program section) 10 Data error
Error status Display itemPC data receiving E-01 PC TRANSLoader function transfer E-02 LOADER COPYFLASH ROM delete E-03 FLASH ERASEBoot section FLASH ROM write E-04 BOOT WRITEProgram section FLASH ROM write E-05 PROGRAM WRITELoader section SUM CHECK E-06 LOADER SUMBoot section SUM CHECK E-07 BOOT SUMProgram section SUM CHECK E-08 PROGRAM SUME2PROM SUM CHECK E-09 E2PROM SUME2PROM write E-10 E2PROM WRITEE2PROM read Verify E-11 E2PROM READE2PROM collating Verify E-12 E2PROM COLLATEBoot section lens check E-13 BOOT LENGTHProgram section lens check E-14 PROGRAM LENGTHE2PROM lens check E-15 E2PROM LENGTHTotal data size check E-16 DATE SIZEIMC communication error E-17 IMC TRANSIMC FRASH ROM write E-18 IMC FLASH WRITELCD section lens check E-19 LCD DATE LENGTHLCD section FLASH ROM write E-20 LCD DATE WRITELCD section SUM CHECK E-21 LCD DATE SUM
1) Initial display
DOWNLOAD MODE
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 23
50 01 Lead edge image position [Function]Used to adjust the copy image position and the lead edge void amount on copy paper. Theadjustment is made by adjusting the image scan start position at 100% and the print start posi-tion (resist roller ON timing). When this simulation is executed, the current set value is displayedin 2 digits. (Center value: 50)
When [Exposure mode selector] key (or [ ] [ ] key for the AL-2050CS) is pressed, the set-ting mode and the display are changed.
Enter the adjustment value and press [START] key to save the set value and make a copy.
When the adjustment is made by the main cassette paper feed, the adjustment values of all thepaper feed ports become the same. (When the set value is increased by 1, shift is made by0.1mm.)
(*): Support for the installation models. For non-installation models, skip.
* When printing with the manual paper feed tray, use paper of the letter size.
* When paper is discharged, the shifter is operated.
[Adjustment procedure]1) Set the print start position (AE lamp ON) (A), the lead edge void amount (TEXT lamp ON)
(B), and the scan start position (PHOTO lamp ON) (C) to 0, and make a copy of a scale at100%. (AL-2030/2040CS)
For the AL-2050CS, the following LED’s are lighted:
• AE lamp/COPY mode lamp: (A)
• TEXT lamp/PRINT mode lamp: (B)
• PHOTO lamp/SCAN mode lamp: (C)
2) Measure the image loss (Rmm) of the scale.
Set C = 10 x R (mm). (Example: Set to 40.)
When the value of C is increased by 10, the image loss is decreased by 1mm. (Default: 50)
3) Measure the distance (Hmm) from the paper lead edge to the image print start position.
Set A = 10 x H (mm). (Example: Set to 50.)
When the value of A is increased by 10, the image lead edge is moved to the paper leadedge by 1mm. (Default: 50).
4) Set the lead edge void amount to B = 50 (2.5mm). (Default: 50)
When the value of B is increased by10, the void is extended by about0.1mm. (For 25 or less, however, thevoid amount is regarded as 0.)
∗ The SPF/RSPF adjustment is made by adjusting the SPF/RSPF image scan start position after OC adjustment.
[Operation]The operation is similar to simulation 46-01.
Main code
Sub code
Contents Details of function/operation
ModeDisplay item (AL-2050CS)
LED(AL-2050CS)
Display lamp(AL-2030/2040CS)
Default
Print start position (Main cassette paper feed)
TRAY1 COPY mode lampMain cassette lamp
AE mode lampMain cassette lamp
50
(*) Print start position (2nd cassette paper feed)
TRAY2 COPY mode lamp2nd cassette lamp
AE mode lamp2nd cassette lamp
50
Print start position (Manual paper feed)
MFT COPY mode lampManual paper feed lamp
AE mode lampManual feed lamp
50
Image lead edge void amount
DEN-A PRINT mode lampMain cassette lamp
TEXT mode lampMain cassette lamp
50
Image scan start position
RRC-A SCAN mode lampMain cassette lamp
PHOTO mode lampMain cassette lamp
50
Image rear edge void amount (Cassette paper feed)
DEN-B COPY mode lampPRINT mode lampSCAN mode lampMain cassette lamp
AE mode lampTEXT mode lampPHOTO mode lampMain cassette lamp
50
Image rear edge void amount (Manual paper feed)
RRC-B COPY mode lampPRINT mode lampManual paper feed lamp
— 50
5mm
10mm
Distance from the paper lead edge to the image lead edge, H = 5mm
Image loss, R = 4mm
(Example)
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 24
50 06 Copy lead edge position adjustment (SPF/RSPF)
[Function]Used to adjust the SPF/RSPF copy lead edge.
When the adjustment value of the document scan position adjustment is increased by 1, thescan start timing is advanced by 0.1mm.
The print result is shifted to the opposite direction of the scan start position.
The adjustment mode can be changed by pressing [Exposure mode selector] key (or [ ] [ ]key for the AL-2050CS). (Adjustment range: 1 – 99, Default: 50)
When scanning a back surface of document, the mode must be changed to operate the SPF/RSPF by pressing [2-SIDED COPY] key.
∗ When there is no document in the SPF/RSPF, copy is inhibited.∗ When paper is discharged, the shifter is operated.
[Operation]The operation is similar to simulation 46-01.
10 Center offset adjustment [Function]Used to adjust the center offset position of copy images on copy paper and that in scanningdocument.When this simulation is executed, the current set value is displayed.Enter the adjustment value and press [START] key to save the setting and make a copy. (Whenthe set value is changed by 1, the center is shifted by 0.1mm.)When the adjustment value is increased, the center is shifted to right. When decreased, thecenter is shifted to left.The modes can be selected by pressing [Exposure mode selector] key (or [ ] [ ] key for theAL-2050CS).When the set value is changed largely, the area outside the shading area may be scanned tocause black streaks on the edges. When the SPF/RSPF is used, select the mode for use of theSPF/RSPF by [2-SIDED COPY] key.
(*): Support for the installation models. For non-installation models, skip.
(**): For Simplex models, skip.* When printing with the manual paper feed tray, use paper of the letter size.
* In the 2nd print center offset adjustment, print is made forcibly as 1to2/Short Edge from OCregardless of duplex setting.
* When paper is discharged, the shifter is operated.
[Operation]The operation is similar to simulation 46-01.
Main code
Sub code
Contents Details of function/operation
ModeInitial value of duplex setting
Display item (AL-2050CS)
LED(AL-2050CS)
Display lamp(AL-2030/2040CS)
Default
Front surface document scan position adjustment
S-S SIDE1 COPY mode lamp
AE mode lamp
50
Back surface document scan position adjustment (AL-2050CS only)
D-S SIDE2 PRINT mode lamp
— 50
Rear edge void adjustment (RSPF)
S-S END SCAN mode lamp
PHOTO mode lamp
50
ModeDisplay item (AL-2050CS)
LED(AL-2050CS)
Display lamp(AL-2030/2040CS)
Default
Print center offset (Main cassette paper feed)
TRAY1 COPY mode lampMain cassette lamp
AE mode lampMain cassette lamp
50
(*) Print center offset (2nd cassette paper feed)
TRAY2 COPY mode lamp2nd cassette lamp
AE mode lamp2nd cassette lamp
50
Print center offset (Manual paper feed)
MFT COPY mode lampManual paper feed lamp
AE mode lampManual paper feed lamp
50
(**) 2nd print center offset (Main cassette paper feed)
SIDE2 PRINT mode lampMain cassette lamp
TEXT mode lampMain cassette lamp
50
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 25
50 12 Document off-center adjustment
[Function]Used to adjust document scan off-center adjustment.The adjustment modes can be selected by pressing [Exposure mode selector] key (or [ ][ ] key for the AL-2050CS). (Adjustment range: 1 – 99, Default: 50)
When the adjustment value is increased, the print result is shifted to left.
* When paper is discharged, the shifter is operated.
[Operation]The operation is similar to simulation 46-01.
18 Memory reverse position adjustment in duplex copy (AL-2040CS/2050CS only)
[Function]When this simulation is executed, the current set correction value is displayed.
Enter the correction value and press [START] key to save the entered correction value. (Correc-tion value range; 1 – 99, Default: 50)
For S-D mode front surface print and print of even paged in D-S mode, reverse memory copyoperation is performed from the rear edge of documents.
When, therefore, the print position adjustment of output images is required, adjust as follows:
In the reverse memory coping, when the document scan is made in the arrow direction, the out-put image is printed from the rear edge of scan image.
When, therefore, the print lead edge is shifted, set the reference chart so that the referenceposition is on the rear edge, and use this simulation to adjust the set value so that the print leadedge is matched.
Since printing is made from the image data most lately stored in memory to the lead edge datafrom the print start position, the image lead edge adjustment is made by changing the end dataposition stored in memory by the set value of this simulation.
Since it is performed by changing the scan end position, the image position adjustment is madeby changing the scan end position and the end data stored in memory.
The adjustment modes can be selected by pressing [Exposure mode selector] key (or [ ][ ] key for the AL-2050CS)
* The initial value of duplex setting is "1to2/Long Edge" for the duplex model, or "2to1" for thesimplex model.
∗ When paper is discharged, the shifter is operated.
[Operation]The operation is similar to simulation 46-01.
Main code
Sub code
Contents Details of function/operation
ModeInitial value of duplex setting
Display item (AL-2050CS)
LED(AL-2050CS)
Display lamp (AL-2030/2040CS)
Default
Platen document scan S-S OC COPY mode lamp
AE mode lamp
50
SPF document front scan
S-S SPF PRINT mode lamp
TEXT mode lamp
50
RSPF document back scan (AL-2050CS only)
D-S RSPF SCAN mode lamp
— 50
ModeInitial value of duplex setting
Display item (AL-2050CS)
LED(AL-2050CS)
Display lamp(AL-2030/2040CS)
Default
OC memory reverse output position
S-D OC COPY mode lamp
AE mode lamp 50
SPF/RSPF memory reverse output position
D-S SPF PRINT mode lamp
TEXT mode lamp
50
Document transport direction Document transport directionScan lead edge Print lead edge
Lead edge void (1)Print start position
Scan end position(Default: Scan cut by void (1)) Rear edge void
Print rear edgeScan direction Scan rear edge
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 26
50 19 Duplex copy rear edge void adjustment (AL-2040CS/2050CS only)
[Function]Used to adjust the rear edge void amount in duplex copy.
When this simulation is executed, the current set value is displayed in 2 digits. (Center value:50.) The adjustment modes can be selected by pressing [Exposure mode selector] key (or [ ][ ] key for the AL-2050CS). (Adjustment range; 1 – 99)
Enter the adjustment value and press [START] key to save the set value and make a copy. (Thepaper information is cleared for every copy.)
When the set value is increased by 1, the void amount is increased by about 0.1mm.
* The initial value for duplex setting is "1to2/Short Edge" for the OC setting, or "2to2" for theRSPF setting.
∗ When paper is discharged, the shifter is operated.
[Operation]The operation is similar to simulation 46-01.
51 02 Resist quantity adjustment [Function]Used to adjust the contact pressure of the main unit resist roller and the SPF/RSPF resist rolleronto paper. When this simulation is executed, the current set value is displayed.
The adjustment modes can be selected by pressing [Exposure mode selector] key (or [ ][ ] key for the AL-2050CS).
Enter the adjustment value with [ ] [ ] key (or [Numeric] key for the AL-2050CS) and press[START] key to save the set value and make a copy.
(*): Support for the installation models. For non-installation models, skip.
[Operation] (AL-2050CS only)The operation is similar to simulation 46-01.
Main code
Sub code
Contents Details of function/operation
ModeDisplay item (AL-2050CS)
LED(AL-2050CS)
Display lamp
(AL-2030/2040CS)Default
Paper rear edge void amount
DEN-B PRINT mode lamp TEXT mode lamp 50
Print start position (Duplex back surface)
RRC-D SCAN mode lamp PHOTO mode lamp 50
ModeDisplay item (AL-2050CS)
LED(AL-2050CS)
Display lamp(AL-2030/2040CS)
Default
Main cassette paper feed
TRAY1 COPY mode lampMain cassette lamp
AE mode lampMain cassette lamp
50
(*) 2nd cassette paper feed
TRAY2 COPY mode lamp2nd cassette lamp
AE mode lamp2nd cassette lamp
50
Manual paper feed MFT COPY mode lampManual paper feed lamp
AE mode lampManual paper feed lamp
50
RSPF document paper feed (Front surface) (AL-2050CS only)
SIDE1 COPY mode lampPRINT mode lampSCAN mode lampMain cassette lamp
— 50
RSPF document paper feed (Back surface) (AL-2050CS only)
SIDE2 COPY mode lampPRINT mode lampMain cassette lamp
— 50
(*) Duplex back surface
DUP-2 PRINT mode lampSCAN mode lampMain cassette lamp
TEXT mode lampPHOTO mode lampMain cassette lamp
50
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 27
53 08 SPF/RSPF scan position automatic adjustment
[Function]Place a A4 paper (white chart) so that it covers the SPF/RSPF scan glass and the OC glasstogether, and close the SPF/RSPF.
When this simulation is executed, the current adjustment value is displayed as the initial display.
* Default is 1. Adjustment range is 1 – 99. Adjustment unit 1 = about 0.127mm
* If the values are kept as the default values, SPF/RSPF scan is not performed properly. Thefront area of the proper scan position may be scanned.
In case of AUTO, press [START] key, and the mirror unit scans from the home position to theSPF/RSPF scan position with the adjustment value displayed. The SPF/RSPF glass cover edgeposition is calculated from the difference between the SPF/RSPF glass cover edge and the OCside document glass CCD output level. If the adjustment is normal, the adjusted value is dis-played. If abnormal, the error LED lights up with the current set value displayed.
During the error LED is lighted, when [START] key is pressed again, execution is performedagain.
[Operation]The operation is similar to simulation 46-01. (In MANUAL)
OK/ERR display in AUTO
61 03 Polygon motor check (HSYNC output check)
[Function]When [ENTER]/[START] key is pressed, HSYNC is performed and the polygon motor is rotated for 30sec.At that time, the ZOOM lamp (or the COPY mode lamp for the AL-2050CS) is lighted for100msec every time when HSYNC is detected.
[Operation] (AL-2050CS only)
63 01 Shading check [Function]Used to display the detection level of white plate for shading.
When [ENTER]/[START] key is pressed, the mirror base unit moves to the white plate for shad-ing and the copy lamp is lighted.
When the light quantity is stabilized, revision is made for every second, and the level of onepixel at the center of CCD which is not corrected is detected and the value is displayed in deci-mal values on the LCD/display. (3 digits)
[Operation] (AL-2050CS only)
Main code
Sub code
Contents Details of function/operation
ModeDisplay item (AL-2050CS)
LED(AL-2050CS)
Display lamp
(AL-2030/2040CS)Default
SPF/RSPF scan position auto adjustment
AUTO COPY mode lamp AE mode lamp 1
SPF/RSPF scan position manual adjustment
MANU PRINT mode lamp TEXT mode lamp 1
<When OK> <When ERR>
53-08 SPF AUTOAUTO 100% ** OK
53-08 SPF AUTOAUTO 100% ** ERR
1) Initial display
61-03 LSU CHKEXECUTING...
1) Initial display
63-01 SHADING CHKEXECUTING... 000
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 28
63 02 Black level automatic correction
[Function]Used to acquire the black level target value used for the black level adjustment of white balance.
When this simulation is executed, the current correction value is displayed in 3 digits of 12bithexadecimal number.
Place the gray gradation chart (UKOG-0162FCZZ) used as the correction document so that thedensity 10 (black side) comes on the left side and that the chart is upside down at the center ofthe plate left center.
When [ENTER]/[START] key is pressed, the mirror base unit scans the chart and calculates thecorrection value.
After completion of correction, the corrected value is displayed on the LCD/display.
* Default: 0
* If the value is set to the default, operation is made with 0x60.
[Operation] (AL-2050CS only)
12 Light quantity stabilization wait time setting
[Function]Used to set the wait time before entering the light quantity level stable evaluation process in thelight quantity stable process of white balance. (Note: The light quantity stable level in the previ-ous light quantity stable state is used as the target. When the light quantity level reaches thetarget during the wait time, the set time of this simulation is ignored and the operation enters thestable evaluation process.)
When this simulation is executed, the currently set value is displayed.Enter the adjustment value with [ ] [ ] key (or [Numeric] key for the AL-2050CS) and press [START] key. The entered value is stored and the machine goes into the sub code entry standby mode.Setting range: 0 – 99 (Complying with the light quantity stable wait time of 0 – 99sec.)
Default: 15 (15sec)
[Operation]The operation is similar to simulation 9-04.
13 Light quantity stabilization band setting
[Function]When the difference between the maximum and the minimum values of the light quantity levelsampled for 3.2sec in the cycle of 100msec in the white balance light quantity stable process iswithin the range set with this simulation, it is judged as the light quantity is stable. (Note: Themagnification ratio of the AFE gain setting is automatically reflected on the stable width.)
When this simulation is executed, the currently set value is displayed.Enter the adjustment value with [ ] [ ] key (or [Numeric] key for the AL-2050CS) and press [START] key. The entered value is stored and the machine goes into the sub code entry standby mode.Setting range: 1 – 99 (Light quantity stable width: Complying with 1 – 99 in 4095 gradations.)
Default: 16
[Operation]The operation is similar to simulation 9-04.
Main code
Sub code
Contents Details of function/operation
Chart back surface
10
1) Initial display
2) [ENTER/START] key: Correction start
63-02 BLACK LEVEL 000
63-02 BLACK LEVELEXECUTING...
<During canceling - When [Clear]/[Clear All] key ispressed->
After canceling, the machine goes into the subcode entry standby mode.
3) After execution
3) In case of an error
THE JOB IS BEINGCANCELED.
63-02 BLACK LEVEL *** OK
63-02 BLACK LEVEL *** ERR
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 29
5. Trouble codesA. Trouble codes list B. Details of trouble codes
64 01 Self print [Function]The status of the optical section is ignored and printing of one page is made. Also when theprint command is received from the host, printing is made.
When this simulation is executed, warm-up is performed and the ready lamp is lighted. (Since,however, the scanner is disabled, initializing is not made.)
Enter the code number and press [ENTER]/[START] key to start paper feed from the selectedcassette and print in the selected pattern.
* For 4 – 99, flip.
[Operation]The operation is similar to simulation 26-02.
67 50 USB receive speed adjustment (USB1.1) (AL-2030/AL-2040CS only)
Used to set the limitation on the print data receive speed of USB2.0 (Full speed) port (USB porton the machine).
→ When print images from USB2.0 (Full speed) port are disturbed, change the setting and tryagain.
When this simulation is executed, the currently set code number is displayed.
Enter the code number corresponding to the adjustment value, and press [START] key tochange the setting.
Main code
Sub code
Contents Details of function/operation
Code number Pattern Display item0 1by2 1 BY 21 Grid pattern CHECK2 White paper WHITE3 Black background BLACK
Code number Setting Speed1 FAST ↑ Fast2 NORMAL13 NORMAL24 SLOW ↓ Slow
Main code
Sub code
Details of trouble
E1 00 IMC communication trouble10 IMC trouble13 IMC flash ROM error81 IMC communication interface error (Parity)82 IMC communication interface error (Overrun)84 IMC communication interface error (Framing)
E7 01 Duplex model memory setup error, memory not-detected error
02 LSU trouble10 Shading trouble (Black correction)11 Shading trouble (White correction)16 Abnormal laser output
F5 02 Copy lamp lighting abnormalityH2 00 Thermistor openH3 00 Heat roller high temperature detectionH4 00 Heat roller low temperature detectionL1 00 Feeding is not completed within the specified time
after starting feeding. (The scan head locking switch is locked)
L3 00 Scanner return troubleL4 01 Main motor lock detection
32 Exhaust fan motor lock detection troubleL6 10 Polygon motor lock detectionU2 04 EEPROM read/write error (Serial communication
error)11 Counter check sum error (EEPROM)
Main code
Sub code
Details of trouble
E1 00 Content IMC communication troubleDetail An abnormality occurs in communication
between the CPU and the IMC.Cause IMC abnormality
IMC memory defect/data abnormalityCheck and remedy
Replace the MCU PWB with new one.
10 Content IMC troubleDetail An abnormality occurs in the IMC.Cause USB chip error/CODEC error on the IMC.Check and remedy
Replace the MCU PWB with a new one.
13 Content IMC flash ROM errorDetail An abnormality occurs in the IMC flash
ROM.Cause IMC abnormalityCheck and remedy
Replace the MCU PWB with a new one.If downloading of the program is abnormally terminated, it may cause an error. Download the program again to avoid this.
81 Content IMC communication interface error (Parity)Detail A parity error occurs in communication
between the CPU and the IMC.Cause IMC abnormality
IMC memory defect/data abnormalityCheck and remedy
Replace the MCU PWB with new one.
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 30
E1 82 Content IMC communication interface error (Overrun)
Detail An overrun error occurs in communication between the CPU and the IMC.
Cause IMC abnormalityIMC memory defect/data abnormality.
Check and remedy
Replace the MCU PWB with new one.
84 Content IMC communication interface error (Framing)
Detail A framing error occurs in communication between the CPU and the IMC.
Cause IMC abnormalityIMC memory defect/data abnormality.
Check and remedy
Replace the MCU PWB with new one.
E7 01 Content Duplex model memory setup error, memory not-detected error
Detail The memory is not set properly or the memory capacity is not set to the duplex setup (6M).
Check and remedy
Set SIM 26-39 code number to 2.
02 Content LSU troubleDetail The BD signal from the LSU cannot be
detected in a certain cycle. (Always OFF or always ON)
Cause LSU connector or LSU harness defect or disconnectionPolygon motor rotation abnormalityLaser beams are not generated.MCU PWB abnormality.
Check and remedy
Check connection of the LSU connector.Execute SIM 61-03 to check the LSU operations.Check that the polygon motor rotates normally.Check that the laser emitting diode generates laser beams.Replace the LSU unit.Replace the MCU PWB.
10 Content Shading trouble (Black correction)Detail The CCD black scan level is abnormal when
the shading.Cause Improper connection of the CCD unit flat
cableCCD unit abnormalityMCU PWB abnormality
Check and remedy
Check connection of the CCD unit flat cable.Check the CCD unit.
Main code
Sub code
Details of trouble
E7 11 Content Shading trouble (White correction)Detail The CCD white scan level is abnormal when
the shading.Cause Improper connection of the CCD unit flat
cableDirt on the mirror, the lens, and the reference white plateCopy lamp lighting abnormalityCCD unit abnormalityMCU PWB abnormality(When occurred in the SPF/RSPF scan position.)Improper installation of the mirror unit
Check and remedy
Clean the mirror, lens, and the reference white plate.Check the light quantity and lighting status of the copy lamp (SIM 05-03).Check the MCU PWB.
16 Content Abnormal laser outputDetail When the laser output is stopped, HSYNC is
detected.Cause Laser abnormality
MCU PWB abnormality.Check and remedy
Check the laser emitting diode operation.Replace the MCU PWB.
F5 02 Content Copy lamp lighting abnormalityDetail The copy lamp does not turn on.Cause Copy lamp abnormality
Copy lamp harness abnormalityCCD PWB harness abnormality.
Check and remedy
Use SIM 5-3 to check the copy lamp operations.When the copy lamp lights up.Check the harness and the connector between the CCD unit and the MCU PWB.When the copy lamp does not light up.Check the harness and the connector between the copy lamp unit and the MCU PWB.Replace the copy lamp unit.Replace the MCU PWB.
H2 00 Content Thermistor openDetail The thermistor is open.
The fusing unit is not installed.Cause Thermistor abnormality
Control PWB abnormalityFusing section connector disconnectionThe fusing unit is not installed.
Check and remedy
Check the harness and the connector between the thermistor and the PWB.Use SIM 14 to clear the self diagnostic display.
Main code
Sub code
Details of trouble
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 31
H3 00 Content Heat roller high temperature detectionDetail The fusing temperature exceeds 240°C.Cause Thermistor abnormality
Control PWB abnormalityFusing section connector disconnection.
Check and remedy
Use SIM 5-02 to check the heater lamp blinking operation.When the lamp blinks normally.Check the thermistor and its harness.Check the thermistor input circuit on the control PWB.When the lamp keeps ON.Check the power PWB and the lamp control circuit on the MCU PWB.Use SIM 14 to clear the self diagnostic display.
H4 00 Content Heat roller low temperature detectionDetail 1) When the target temperature (165°C) is
not reached in 55 sec after starting warming-up.
2) When the temperature below 100°C is detected for 300ms under the ready print state.
∗ "Starting warming-up" means not only that in power supply but also reset that in reset from shut-off and in side door close. (The timing of generating H4 is not limited to that in power supply.)
Cause Thermistor abnormalityHeater lamp abnormalityThermostat abnormalityControl PWB abnormality
Check and remedy
Use SIM 5-02 to check the heater lamp blinking operation.When the lamp blinks normally.Check the thermistor and its harness.Check the thermistor input circuit on the control PWB.When the lamp does not light up.Check for disconnection of the heater lamp and the thermostat. Check the interlock switch.Check the power PWB and the lamp control circuit on the MCU PWB.Use SIM 14 to clear the self diagnostic display.
Main code
Sub code
Details of trouble
L1 00 Content Feeding is not completed within the specified time after starting feeding. (The scan head locking switch is locked)
Detail The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judgment of lock. When the difference in the levels of which and black is small, it is judged that the black mark could not be scanned by lock and the trouble code "L1" is displayed.
Cause The scan head is locked by the lock switch.Mirror unit abnormalityThe scanner wire is disconnected.The origin detection sensor abnormalityMirror motor harness abnormality
Check and remedy
Check to confirm that the scan head lock switch is released.Use SIM 1-1 to check the mirror reciprocating operations.When the mirror does not feed.Check for disconnection of the scanner wire.Check the harness and the connector between the mirror motor and the MCU PWB.Replace the mirror unit.Replace the MCU PWB.When the mirror does feed.Use SIM 1-2 to check the mirror home position sensor.
L3 00 Content Scanner return troubleDetail When the mirror base is returned for the
specified time (6 sec) in mirror initializing after turning on the power, the mirror home position sensor (MHPS) does not turn ON. Or when the mirror base is returned for the specified time (about 6 sec) after start of copy return, the mirror home position sensor (MHPS) does not turn ON.
Cause Mirror unit abnormalityScanner wire disconnectionOrigin detection sensor abnormalityMirror motor harness abnormality
Check and remedy
Use SIM 1-1 to check the mirror reciprocating operations.When the mirror does not return.Check for disconnection of the scanner wire.Check the harness and the connector between the mirror motor and the MCU PWB.Replace the mirror unit.Replace the MCU PWB.When the mirror does feed.Use SIM 1-2 to check the mirror home position sensor.
Main code
Sub code
Details of trouble
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 32
L4 01 Content Main motor lock detectionDetail When the main motor encoder pulse is not
detected for 100 msec.Cause Main motor unit abnormality
Improper connection or disconnection the main motor and the harness.MCU PWB abnormality
Check and remedy
Use SIM 25-01 to check the main motor operations.Check connection of the main motor harness/connector.Replace the main motor.Replace the MCU PWB.
32 Content Exhaust fan motor lock detection troubleDetail The error detection is started after 2 sec
from starting rotation of the exhaust fan motor.1) The continuous rotation state of 250ms is
not detected for 1 sec after starting detection.
2) When the lock sensor (in the exhaust fan) detects the HIGH level (unstable) after detection the lock state (stable state).
Cause Exhaust fan motor connector connection troubleExhaust fan motor troubleMCU PWB trouble
Check and remedy
Exhaust fan motor connector connection checkExhaust fan motor replacementReplace the MCU PWB.
L6 10 Content Polygon motor lock detectionDetail The lock signal (specified rpm signal) does
not return within a certain time (about 20 sec) from starting the polygon motor rotation.
Cause Polygon motor unit abnormalityImproper connection or disconnection of the polygon motor and the harness.MCU PWB abnormality
Check and remedy
Use SIM 61-1 to check the polygon motor operations.Check connection of the polygon motor harness/connector.Replace the polygon motor.Replace the MCU PWB.
U2 04 Content EEPROM read/write error (Serial communication error)
Detail EEPROM access process errorCause EEPROM abnormalityCheck and remedy
Check that the EEPROM is properly set.Use SIM 16 to cancel the trouble.Replace the MCU PWB.
11 Content Counter check sum error (EEPROM)Detail Check sum error of the counter area in the
EEPROMCause EEPROM abnormalityCheck and remedy
Check that the EEPROM is properly set.Use SIM 16 to cancel the trouble.Replace the MCU PWB.
Main code
Sub code
Details of trouble
AL-2030/2040CS/2050CS SIMULATION, TROUBLE CODES 10 - 33
[11] USER PROGRAMThe conditions of factory setting can be changed according to theuse conditions.
1. Functions that can be set with user programs
Toner save modeReduces toner consumption by approximately 10%.
Power save modesThe unit has two power save modes of operation: preheat modeand auto power shut-off mode.
Preheat mode
When the unit enters the preheat mode, the power save ( ) indi-cator will light up and other indicators will remain on or off asbefore. In this condition, the fuser in the unit is maintained at alower heat level, thereby saving power. To copy from the preheatmode, make desired copier selections and press the start ( )key using the normal copying procedure.
Auto power shut-off mode
When the unit enters the auto power shut-off mode, the powersave ( ) indicator will light up and other indicators except theONLINE indicator will go out. The auto power shut-off mode savesmore power than the preheat mode but requires a longer timebefore starting copying. To copy from the auto power shut-offmode, press the start ( ) key. Then make desired copier selec-tions and press the start ( ) key using the normal copying proce-dure.
Auto clearThe unit returns to the initial settings a preset amount of time afterthe end of job.
This preset amount of time (auto clear time) can be changed.
Resolution of AUTO & MANUAL modeYou can set the copy resolution used for AUTO and MANUAL( ) exposure mode.
2. Toner save mode (AL-2030/2040CS)1) Press the exposure mode selector key to select the MANUAL
( ) mode.
2) Press and hold down the exposure mode selector key forapproximately 5 seconds. The MANUAL ( ) indicator willgo out and the PHOTO ( ) indicator will begin to blink. Thelight and dark indicator marked "5" will light up, indicating thestandard toner mode is active.
3) To enter the toner save mode, press the light ( ) key. Thelight and dark indicator marked "1" will light up, indicating thetoner save mode is selected.
4) Press the exposure mode selector key. The PHOTO ( ) indi-cator will stop blinking and light up steadily. The light and darkindicator marked "3" will light up. The toner save mode is nowactive.
Note: To return to the standard mode, repeat the procedure butuse the dark ( ) key to select exposure level "5" in step3).
3. User programs (AL-2030/2040CS)The user programs allow the parameters of certain functions to beset, changed, or canceled as desired.
Set the power save modes, auto clear time, preheat mode, SPF automatic original discharge time, resolution of AUTO & MANUAL mode and reset factory setting.
1) Press and hold down the light ( ) key simultaneously formore than 5 seconds until all the alarm indicators ( , ,
) blink and " " appears in the display.
2) Use the left copy quantity ( ) key to select a user programnumber (1: Auto clear time, 2: Preheat mode, 3: Auto powershut off mode, 4: Auto power shut off timer, 6: SPF automaticoriginal discharge time, 10: Resolution of AUTO & MANUALmode, 21: Reset factory, 24: Prevention of OC copies whenthe SPF is up function, 25: Copy effective paper width settingfunction (Bypass tray), 26: Copy effective paper width settingfunction (Tray 1), 27: Copy effective paper width setting func-tion (Tray 2) (AL-2040CS only), 28: Selection of copy startstate (Polygon rotation on/off), 29: Fusing temperature settingwhen the bypass tray is used). The selected number will blinkin the left side of the display.
3) Press the start ( ) key. The entered program number will besteadily lit and the currently selected parameter number for theprogram will blink on the right side of the display.
4) Select the desired parameter using the right copy quantity( ) key. The entered parameter number will blink on theright of the display.
Program No.
Mode Parameters
1 Auto clear time 1 → 10 sec., 2 → 30 sec., *3 → 60 sec., 4 → 90 sec., 5 → 120 sec., 6 → OFF
2 Preheat mode *1 → 30 sec., 2 → 60 sec., 3 → 5 min., 4 → 30 min., 5 → 60 min., 6 → 120 min., 7 → 240 min.
3 Auto power shut off mode *1 → ON, 2 → OFF4 Auto power shut off timer *1 → 5 min., 2 → 30min.,
3 → 60 min., 4 → 120 min., 5 → 240 min.
6 SPF automatic original discharge time
1 → 5 min., *2 → 30 min., 3 → 60 min., 4 → 120 min., 5 → 240 min., 6 → OFF
10 Resolution of AUTO & MANUAL mode
*1 → 300dpi, 2 → 600dpi
21 Reset factory 1 → YES, *2 → NO
AL-2030/2040CS/2050CS USER PROGRAM 11 - 1
∗ Factory default settings are indicated with an asterisk (*).
5) Press the start ( ) key. The right-hand number in the displaywill be steadily lit and the entered value will be stored.
Note: To change the setting or to set another mode, press the clearkey. The unit will return to step 2).
6) Press the light ( ) key to return to the normal copy mode.
4. User programs (AL-2050CS)1) Press the [MENU] key and then press the [ENTER] key.
In printer mode, the user programs are accessed by simplypressing the [MENU] key.
2) Press the [ ] key ( ) or [ ] key ( ) to select the itemthat you wish to configure in the USER PROGRAM items, andthen press the [ENTER] key.
• You can also select a program by directly entering the pro-gram number with the numeric keys.
3) Press the [ ] key ( ) or [ ] key ( ) to change the set-ting of the selected item.
Note:
• If you mistakenly select the wrong item, press the [CLEAR] key( ) and repeat the procedure from step 2.
• To cancel a setting for a user program, press the [MENU] key.
4) Press the [ENTER] key.
Your selection appears briefly and then the previous screenappears.
Note: When "AE LEVEL ADJUST" is selected in the user programsand the [ENTER] key is pressed, the automatic exposureadjustment screen appears. Adjust the exposure and pressthe [ENTER] key.
A. Copy mode
24 Prevention of OC copies when the SPF is up function
*1 → ON, 2 → OFF
25 Copy effective paper width setting function (Bypass tray)
*1 → Large (LETTER/A4 width), 2 → Small (INVOICE/B5R width)
26 Copy effective paper width setting function (Tray 1)
*1 → Large (LETTER/A4 width), 2 → Small (INVOICE/B5R width)
27 Copy effective paper width setting function (Tray 2)(AL-2040CS only)
*1 → Large (LETTER/A4 width), 2 → Small (INVOICE/B5R width)
28 Selection of copy start state (Polygon rotation on/off)
*1 → ON, 2 → OFF
29 Fusing temperature setting when the bypass tray is used
1 → Low, *2 → High
Program No.
Mode Parameters
Program number
Program nameSetting codes
(factory default setting appears in bold)
Explanation
1 AUTO CLEAR 1: 10 SEC.2: 30 SEC.3: 60 SEC.4: 90 SEC.5: 120 SEC.6: OFF
• Auto clear time automatically returns the copy settings to the initial settings ifno keys are pressed for a preset period of time following the end of a copyjob.
• This program is used to select the period of time. Auto clear time can also bedisabled.
2 PREHEAT MODE 1: 30 SEC.2: 1 MIN.3: 5 MIN.4: 30 MIN.5: 60 MIN.6: 120 MIN.7: 240 MIN.
• This function automatically switches the machine to a low power consumptionstate if the set duration of time elapses without the machine being used whenthe power is on. The power save indicator lights up, however, the keys on theoperation panel can be used. Normal operation automatically resumes whena key on the operation panel is pressed, an original is placed, a print job isreceived.
3 AUTO SHUT-OFF 1: ON2: OFF
• Use this setting to enable or disable auto power shut-off mode.
4 AUTO SHUT-OFF TIME
1: 5 MIN.2: 30 MIN.3: 60 MIN.4: 120 MIN.5: 240 MIN.
• This function automatically switches the machine to a state that consumeseven less power than preheat mode if the set duration of time elapses withoutthe machine being used when the power is on. All lights except the powersave indicator go off.To resume normal operation, press the [START] key ( ).Normal operation also resumes automatically when a print job is received orscanning is begun from a computer. While in auto power shut-off mode, nokeys (except the [START] key ( )) can be used.
7 LAYOUT IN 2IN1 1: PATTERN 12: PATTERN 2
• Use this setting to select the layout pattern when two original pages arecopied onto a single sheet of paper.
8 OFFSET FUNCTION
1: ON2: OFF
• When enabled, this function offsets the position of each set of copies in theoutput tray in copy mode, and each print job in printer mode.
9 ROTATE ORIG. IMAGE
1: ON2: OFF
• When two-sided copying is performed, this function rotates the image on theback of the original. This is convenient when binding the copies at the top(tablet binding).
10 AE/TEXT RESOLUTION
1: 300dpi2: 600dpi
• This setting is used to change the copy resolution in AUTO and TEXT modefrom 600 x 300 dpi to 600 x 600 dpi (high-quality mode). Scanning is slowerwhen high-quality mode is used.
AL-2030/2040CS/2050CS USER PROGRAM 11 - 2
11 2-SIDED COPY MODE
1: HI-SPEED2: NORMAL
• If the memory fills up when two-sided copying is performed, "NORMAL" canbe selected to make copying possible. However, "NORMAL" results in aslower copying speed. Normally "HI-SPEED" is selected to enable fast two-sided copying.
12 MARGIN WIDTH 1: 1/4"2: 1/2"3: 3/4"4: 1"
• Use this setting to set the margin width.
13 MEM. FOR PRINTER
1: 30%2: 40%3: 50%4: 60%5: 70%
• Use this to change the proportion of machine memory used for printer mode.
14 AUTO KEY REPEAT
1: ON2: OFF
• Use this setting to select whether or not holding down a key causes repeatedinput of the key. For keys that normally cause a set value to decrease orincrease when held down (for example, the [ ] key ( ) or [ ] key( )), this program can be used to have the set value not change when thekey is held down.
15 KEY PRESS TIME 1: NORMAL2: 0.5 SEC.3: 1.0 SEC.4: 1.5 SEC.5: 2.0 SEC.
• Use this setting to select how long a key must be pressed for the input to beaccepted.By selecting a longer time, you can prevent settings from being changed bythe accidental pressing of a key.
16 KEY TOUCH SOUND
1: LOW2: HIGH3: OFF
• This sets the volume of beep signals.
17 SOUND AT DEFAULT
1: ON2: OFF
• Use this to sound a beep when a base setting is selected.
18 TONER SAVE MODE
1: ON2: OFF
• This mode reduces toner usage by about 10% when copying. Toner savemode is effective when the exposure mode is AUTO or TEXT.
19 AE LEVEL ADJUST
1: SPF/RSPF (Adjustment to 5 levels is possible.)
2: DOCUMENT GLASS (Adjustment to 5 levels is possible.)
• This is used to adjust the exposure level.• The automatic exposure level can be adjusted separately for the document
glass and the RSPF.• For the procedure for adjusting the exposure and guidelines for numeric
values. The factory default setting for the exposure level is center.
20 LANGUAGE 1: AMERICAN ENGLISH2: ENGLISH3: FRENCH4: SPANISH
• This is used to set the language used in the display.
21 RESET FACTORY 1: YES2: NO
• This is used to return all settings to the factory default settings.
22 SORT AUTO SELECT
1: ON2: OFF
• Use this setting to enable or disable sort auto select mode.
24 CHECK RSPF OPEN
1: ON2: OFF
• You can set the operation that takes place if the [START] key ( ) is pressedwhen the RSPF is not completely closed.
25 VALID COPY WIDTH
1: 8.5x112: 5.5x8.5
• Set the allowed paper sizes for copying from the bypass tray. When "5.5x8.5"is selected, a copy of a letter size original will only be printed up to invoicesize.
28 LSU SETTING 1: ON2: OFF
• Select whether copying is only allowed when the polygon motor is rotating, oralso when the polygon motor is stopped.
29 PAPER TYPE 1: PLAIN PAPER2: HEAVY PAPER
• Set the temperature of the fusing unit when the bypass tray is used. Normally"PLAIN PAPER" should be selected.
30 DISPLAYCONTRAST
1: LIGHTER2: LIGHT3: NORMAL4: DARK5: DARKER
• Set the contrast of the display.
Program number
Program nameSetting codes
(factory default setting appears in bold)
Explanation
AL-2030/2040CS/2050CS USER PROGRAM 11 - 3
B. Print mode
* The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", however, the printing speed does not increase considerably.
Program number
Program nameSetting codes
(factory default setting appears in bold)
Explanation
1 FORCEDOUTPUT
1: ON2: OFF
• When this function is enabled, printing in printer mode will automaticallycontinue using a different size of paper if the specified size of paper runs outin all trays. This feature does not function in copy mode.
2 USB 2.0 MODESWITCH*
1: FULL-SPEED2: HI-SPEED
• This sets the USB 2.0 data transfer speed. To obtain the fastest speed whenusing the USB 2.0 connector, first verify that your computer meets thesystem requirements (operating system and driver), and then use thisprogram to change the USB 2.0 mode to "Hi-Speed". Note that the settingshould not be changed while running a TWAIN driver.
3 AUTO TRAYSWITCH
1: ON2: OFF
• If the paper runs out during printing and there is paper of the same size inanother tray, this function automatically switches to that tray (excluding thebypass tray). The function can be disabled.
AL-2030/2040CS/2050CS USER PROGRAM 11 - 4
[12] ELECTRICAL SECTION
1. Block diagramA. Overall block diagram
(1) AL-2030/2040CS
Ca
rria
ge
Un
it
CC
DP
WB
12V
5V
NF
A5V
3.3V
Reg
5V
SPFM
oto
rM
ech
an
icalL
oa
d
RMPF
S,RR
S,CPF
S1
G8bits(M
SB/L
SB)
B(C
ou
nte
r)MCNT
5V
Se
nso
r/SW
(Ele
cto
ricald
ete
cto
r/SW/S
en
so
r)
CPUINTERRUPT
SPPD
PSW
MC
U-P
WB
FW
MHP
S
CPUI/O
Inte
rlo
ck
SW
Ca
sse
tte
de
tecto
rX2
DrumIn
itiald
ete
cto
r
3.3V
PPD1
POD
MFD
PPD2
SPOD
Prin
terCLK
(18
.3856MHz)
3.3V
Sca
nn
erCLK(48MHz)
A[19…1]
OPEPWB
D[15…0]
USBI/F
1Mb
it
16Mb
it
Duple
xM
oto
r
16b
it
FanM
oto
rI2CBu
s
(2sp
ee
d,L
ock
se
nso
r)8Kbyte
24V
12V
2n
dC
as
se
tte
Ma
inM
oto
rT
on
erM
oto
rM
irro
rM
oto
r
(AL2040
only)
Polyg
on
Me
ch
an
icallo
ad
Moto
r
CPF
S2
Se
nso
r/SW
PAPD,PPD3,
PD2,CED2
ACC
ode
LSU
KRONO
SA
SIC
(296
pin)
CPU
H8S/2321
(19
.6608MHz)
EEPROM
SDRAM
16Mbyte(AL2040)
or8Mbyte(AL2030)
ResetIC
SRAM
Drive
r
Fla
shROM
AFE(HT82V24)
CD
SAGC
MPX
AD
16b
its
CCDD
rive
r
CCFL
x2
Lam
pIn
vert
er
forCCFL
HOME
PO
SITION
SEN
SOR
CCD
(ILX558X)
CPUCLK(19.6608MHz)
SystemR
eset S
SCG
PMD
Drive
r
LEDD
rive
rLED AL203044
pcs
AL204048
pcs
HC151
x2
KEYM
atr
ix
AL203013
pcs
AL204015
pcs
STARTKEY
POWER
SUPPLY
/POFF,HL,PR
FW3
.3V,5VEN,5V,12V,24V
HVU
TC,GRID,MC,BIA
S
PMCLK
PSW
KEYIN1,2
SELIN1,2,3
OP-CLK
OP-LATCH
OP-DATA
PSL
MHP
S
Drive
r
/MMD
PWM
0-24V
HC151
DC-DC
/MMRDY
LA
SER
MMCLK
USB1T20
PSLLED
Drive
r
ONLLED
ONL
Drive
r
NICPCBA
(AL2040
only)
RJ45
(N/W
connecto
r)E
therC
hip
RTL8019A
S
FPGA
CPU
uPD703100
Fla
shROM
1Mb
it
SRAM
256
kbit
1284I/F
AL2040
only
USB2.0
FullSpeed
AL-2030/2040CS/2050CS ELECTRICAL SECTION 12 - 1
(2) AL-2050CS
Car
riag
e U
nit
12V
12V
Reg
A5V
3.3V
SP
F M
otor
R G8b
its (
MS
B/L
SB
)B
FA
X M
od
el O
nly
AR
-FX
135V
Spe
aker
Mec
han
ical
Lo
ad
MC
U-P
WB
MP
FS
,RR
S,C
PF
S1
(RS
PF
UN
IT S
PU
S,S
RV
C)
3.3V
8Mb
256M
bx1
or 1
6Mb
1284
I/F
D[7
..0]
AR
-NB
2AR
D12
MH
z(A
R O
ptio
n)C
SIN
TS
enso
r/S
WP
rinte
r C
LKE
ther
net
(E
lect
oric
al d
etec
tor/
SW
/Sen
sor)
/ES
PR
DC
PU
INT
ER
RU
PT
SP
PD
18.3
856M
Hz
3.3V
18.3
856M
Hz
UA
RT
CP
U I/
ON
W P
WB
Inte
rlock
SW
Cas
sette
det
ecto
r X
2D
rum
Initi
al d
etec
tor
Sca
nner
CLK
(12M
Hz
x448
MH
z)A
[19…
1]P
PD
1P
OD
D[1
5…0]
MF
DP
PD
21M
bit
OP
E P
WB
16
Mbi
tS
PID
SR
JDS
CO
D
Dup
lex
Mod
el O
nly
CP
UC
LK8b
itD
uple
x M
otor
FA
X M
odel
Onl
yI2
C B
us
8bit
FA
X O
PE
PW
BA
R-F
X13
D[1
5…8]
8Kby
teS
hifte
r M
otor
Buz
zer
Fan
Mot
or24
V12
V
(AR
Mod
el O
nly)
2nd
Cas
sett
eM
ain
Mot
orT
oner
Mot
orM
irror
Mot
or
Mec
hani
cal l
oad
CP
FS
2
Sen
sor/
SW
Pol
ygon
M
otor
PP
D3,
PD
2,C
ED
2
AC
Cod
e
LSU
KR
ON
OS
AS
IC
(296
pin)
CP
UH
8S/2
321
(19.
6608
MH
z)
EE
PR
OM
SD
RA
M8M
byte
Res
et IC
SR
AM
Driv
er
Fla
sh R
OM
AF
E(H
T86
V26
)
C D S
A G C
M P X
AD
16bi
ts
CC
D D
river
CC
FL
x 2
Lam
p In
vert
erfo
r C
CF
L
HO
ME
PO
SIT
ION
SE
NS
OR
CC
D(I
LX55
8K)
CP
U C
LK(1
9.66
08M
Hz)
Sys
tem
Res
et
SS
CG
PMD
Driv
er
LED
Driv
erLE
D
HC
151
KE
Y M
atrix
ST
AR
T K
EY
PO
WE
R S
UP
PL
Y
/PO
FF,H
L,P
RFW 3.
3V,5
VE
N,5
V,1
2V,2
4V
HV
U
TC
, GR
ID, M
C, B
IAS
PMCLK
PS
W
KE
YIN
SE
LIN
1,2,
3
OP
-CLK
OP
-LA
TC
HO
P-D
AT
A
PS
L
MH
PS
Driv
er
Driv
er
/MMD
PW
M
0 -
24V DC
-DC
Imag
e B
US
(PI-
Bus
)Im
age
BU
S(P
O-B
us)
OA
982
SD
RA
MF
lash
RO
M
/MMLD
8
KE
YS
CA
N1-
3
ISP
1583
USB2.0High-speed
P-B
us
LCD
(2 x
20)
FA
X I/
F
HC
238
(3 to
8 d
ecod
e)
EE
PR
OM
(CR
UM
)
LCD
ELC
D R
SLC
D R
/W(T
BD
)LC
D D
B7-
4
FA
X M
ain
PC
BA
Driv
er
IO A
SIC
LAS
ER
KE
Y M
atrix
LED
NIC
PC
BA
(A
L M
odel
onl
y)R
J45
(N/W
conn
ecto
r)E
ther
Chi
pR
TL8
019A
S
FP
GA
CP
UuP
D70
3100
Fla
shR
OM
1Mbi
tS
RA
M25
6kbi
t
MMCLK
PS
L LE
D
8
SS
CG
PMRDY
Driv
er
Net
wor
k B
ox10
0Bas
e-T
AL-2030/2040CS/2050CS ELECTRICAL SECTION 12 - 2
2. Actual wiring diagramA. AL-2030
(1) MCU PWB (1/2)DHAI-0519Q
SPZ
DHAI-0287Q
SZZ
CN22
CN2
DHAI-0513Q
SPZ
CN304
CN303
DHAI-0270Q
SZZ
LEDPPD2
LEDPPD2
11
11
PPD2
22
22
D-GND
33
3
44
55
B5B-PH-K-S
66
77
88
CN11
99
10
10
11
11
12
12
13
13
B4B-PH-K-S
14
14
15
15
16
16
17
17
18
18
IMSA-9619S-18A
CN13
B05B-XA
SK-1
DHAI-0286Q
SZZ
CN19
CN4
1 2B3B-PH-K-S
3 4
B4B-PH-K-R
DHAI-0530Q
SPZ
CN42
8 7 6CN3
DHAI-0268Q
SZ3
51
1
42
2
33
3
24
4
15
5
B08B-CZHK-B
66
77
88
99
10
10
DHAI-0529Q
SPZ
CN41
11
11
512
12
413
13
314
14
215
15
116
16
1B05B-CZHK-B
17
17
2
18
18
19
19
CN25
20
20
21
21
22
22
23
23
B3B-PH-K-M
24
24
25
25
DHAI-0514Q
SPZ
CN6
26
26
1
27
27
2
28
28
3
29
29
4
30
30
5
31
31
B5B-PA
SK-1
32
32
FF4-32-S15D5
CN23
B2P-VH
CN5
DHAI-0526Q
SPZ
11
1
CN12
22
2
36
6
45
5
B4B-PH-K-R
88
B3B-PH-K-E
DHAI-0515Q
SPZ
11
CN10
2
DHAI-0273Q
SZZ
CN1
DHAI-0525Q
SPZ
1
B3B-PH-K-S
11
4
22
33
44
DHAI-0292Q
SZZ
DHAI-0269Q
SZZ
CN7
55
1
CED1
16
6
D-GND
27
7
88
DHAI-0267Q
SPZ
B3B-PH-K-K
B24B-PNDZ
S-1
1
DHAI-0289Q
SZZ
CN16
CN1
B3B-PH-K-R
91
10
2
11
3
12
41
DHAI-0510Q
SP1
DHAI-0511Q
SP1
CN26
13
52
11
14
62
2
15
716
817
9
18
10
B5B-PH-K-R
19
11
20
12
21
13
1
DHAI-0272Q
SZZ
CN15
22
14
2
23
15
24
16
B2P-VH-R
B24B-PNDZ
S-1
L N
3 4 5
HLN
TMB_O
/RR
S
1 2
/MMCLK
MMLD
/MMCLK
TMA_O
-VIDEO
-S/H
D-GND
MMLD
-HSYNC
D-GND
+5V
-LDEN
3
STROBE
PSL
KIN2
3/DMT_1
5VDR
ST
D-GND
HLL
HLN
P-GND
/PMD
PMRDY
PMCLK_A
5 14
CCD_PHI1
(AFE_DB7)
SELIN1
OP-CLK
SELIN2
OP-LATCH
OP-DATA
5VEN
ONL
PSW
D-GND
24V
24V1(D
SW
S)
CCD-R
S
(BSAMP)
CCD-CP
(AFE_SDI)
CCD_PHI2
D-GND
(AFE_DB5)
(AFE_SCK)
OUTA-
OUTB-
CCD-TG
P-GND
P-GND
EN5V
VCL
VCL
12V
12V
D-GND
/DMT_3
124VDupMT
21 2 3 15
DR
ST
/DMT_2
2/DMT_0
4 323
24V
D-GND
D-GND
LEDPPD1
2
PPD1
(AFE_DB0)
(AFE_DB2)
(AFE_DB1)
DV
SEL
TC
S
24V
INT24V
/MMD
2
CED1
1
24V
1 2 2
PGND
SELIN3
OP-STB
D-GND
(VSAMP)
SELIN1
OP-DATA
OP-LATCH
5VKEYIN2#
OP-CLK
DR
ST
D-GND
D-GND
KIN1
DR
ST
D-GND
ONL
SELIN2
PSL
PSW
EN5V
KEYIN1#
D-GND
SELIN3
D-GND
D-GND
LEDPOD
POD
OUTB+
OUTA+
D-GND
VFMOUT
PGND
1
PPD2
D-GND
1 2FANLK
/VFMCNT
3 4
22
D-GND
RTH_IN
15
RTH_IN
D-GND
1 2 3
1 2 3
D-GND
53 4
24V
D-GND
1 2 3 4
D-GND
/LDEN
/VIDEO
SHOLD
53 46 87 1 2
(VSAMP)
2
D-GND
3 1 1
(AFE_SEN)
(ADCLK)
D-GND
PMCLK_A
12V
12V
EN5V
D-GND
P-GND
P-GND
VCL
VCL
CCD-TG
D-GND
CCD-R
S
(BSAMP)
CCD-CP
(AFE_
SDI)
CCD_PHI2
D-GND
CCD_PHI1
(AFE_
SEN)
(AFE_DB5)
(AFE_DB6)
VCL
P-GND
(AFE_DB4)
(AFE_DB3)
MHP
S
D-GND
(ADCLK)
D-GND
(AFE_
SCK)
(AFE_DB7)
D-GND
(AFE_DB0)
(AFE_DB2)
(AFE_DB1)
D-GND
mt_
at_
hom
e
(AFE_DB6)
(AFE_DB4)
(AFE_DB3)
MC
24V
TC
S
DV
SEL
D-GND
BIA
S
/GRIDL
INT5V
INT24V
BIA
S
F-GND
MCFB
TC
BC
/BIA
S
/TC
/GRIDL
/MC
INT5V
INT24V
EN5V
3.3VIN
5V
GRID
/MC
/BIA
S
/TC
D-GND
P-GND
D-GND
3.3VIN
/POFF
12VIN
24V
FW
P-GND
24V
/PR
HLOUT
P-GND
HLL
D-GND
P-GND
D-GND
3.3VIN
EN5V
3.3VIN
5V
P-GND
/PR
HLOUT
P-GND
24V
/POFF
12VIN
24V
FW
D-GND
P-GND
2PD1
1
PMRDY
/PMD
/SYNC
INT5V
D-GND
3
24V
/CPF
S1
1 2 3 1
INT24V
PGND
/MMD
3
DGND
24V
/MPF
S
5 MFD
PP
D2
Th
erm
isto
r
Fan
MT
PO
D
PO
LY
GO
NM
T
LD
TO
NE
RM
T
RE
SIS
TR
OL
LE
R
SO
LE
NO
ID
CA
SS
ET
TE
PA
PE
R
SO
LE
NO
ID
CE
D1 PP
D1
DR
ST
OP
E
PW
B
SC
AN
NE
R
MT
CC
D
PW
B
INV
ER
TE
R
PW
B
CL
CL
TC
SD
V
un
HV
TP
WB
PO
WE
R
SU
PP
LY
PW
BA
C-C
OR
D
MC
UP
WB
MA
INM
T
AL
MO
DE
LO
NL
Y
TH
ER
MO
ST
AT
HL
SC
AN
NE
R
UN
MP
FS
SO
LE
NO
ID
AL-2030/2040CS/2050CS ELECTRICAL SECTION 12 - 3
(2) SPF unit (2/2)
CN24
DHAI-0532Q
SP1
B12B-PH-K-S
24V
SPFMT
1
24V
SPFMT
2
SPMT_0
3
SPMT_2
4
SPMT_1
5
SPMT_3
6
SPID
7
DGND
8
LED
SPID
9
SPPD
10
DGND
11
LED
SPPD
12
2DGND
3LED
SPPD
3LED
SPID
1SPPD
SPID
2DGND
3B
1/B
1
A
6/A
5COMA
2COMB
4
MC
U
PW
BS
PID
SP
MT
SP
FU
NIT
SP
PD
AL-2030/2040CS/2050CS ELECTRICAL SECTION 12 - 4
B. AL-2040CS
(1) MCU PWB (1/2)DHAI-0519Q
SPZ
DHAI-0287Q
SZZ
CN22
CN2
DHAI-0513Q
SPZ
CN304
CN303
DHAI-0270Q
SZZ
11
11
11
22
22
22
33
33
3
44
11
55
22
B5B-PH-K-S
66
77
88
CN11
99
10
10
11
11
12
12
13
13
B4B-PH-K-S
14
14
15
15
16
16
17
17
18
18
IMSA-9619S-18A
CN13
B05B-XA
SK-1
DHAI-0286Q
SZZ
CN19
CN4
1 2B3B-PH-K-S
3 4
B4B-PH-K-R
DHAI-0530Q
SPZ
CN42
-HSYNC
8
D-GND
7
+5V
6CN3
DHAI-0268Q
SZ3
51
1
-LDEN
42
2
-VIDEO
33
3
-S/H
24
4
D-GND
15
5
B08B-CZHK-B
66
77
88
99
10
10
DHAI-0529Q
SPZ
CN41
11
11
512
12
413
13
314
14
215
15
116
16
1B05B-CZHK-B
17
17
218
18
19
19
CN25
20
20
21
21
22
22
23
23
B3B-PH-K-M
24
24
25
25
DHAI-0514Q
SPZ
CN6
26
26
127
27
228
28
329
29
430
30
531
31
B5B-PA
SK-1
32
32
FF4-32-S15D5
CN23
B2P-VH
CN5
DHAI-0526Q
SPZ
11
1
CN12
22
2
36
6
45
5
B4B-PH-K-R
88
B3B-PH-K-E
DHAI-0515Q
SPZ
11
CN10
2
DHAI-0273Q
SZZ
CN1
DHAI-0525Q
SPZ
1
B3B-PH-K-S
11
4
22
33
44
DHAI-0292Q
SZZ
DHAI-0269Q
SZZ
CN7
55
1
CED1
66
D-GND
77
88
DHAI-0267Q
SPZ
B3B-PH-K-K
B24B-PNDZ
S-1
1
DHAI-0289Q
SZZ
CN16
CN1
B3B-PH-K-R
91
10
2
11
3
12
41
DHAI-0510Q
SP1
DHAI-0511Q
SP1
CN26
13
52
11
14
62
2
15
716
817
9
18
10
B5B-PH-K-R
19
11
20
12
21
13
1
DHAI-0272Q
SZZ
CN15
22
14
2
23
15
24
16
B2P-VH-R
B24B-PNDZ
S-1
L N
1 2
TMA_O
TMB_O
/RR
S
1
D-GND
MMLD
/MMCLK
LEDPPD2
PD1
MMLD
/MMCLK
PPD2
LEDPPD2
D-GND
RTH_IN
KIN2
3/DMT_1
5VDR
ST
D-GND
5V
/DMT_0
OP-DATA
5VEN
SELIN1
OP-CLK
SELIN2
OP-LATCH
D-GND
(AFE_
SCK)
(AFE_
SEN)
(ADCLK)
D-GND
24V
/MPF
S
24V
CCD-R
S
(BSAMP)
CCD-CP
(AFE_
SDI)
CCD_PHI2
D-GND
CCD_PHI1
24V1(D
SW
S)
5 MFD
DGND
3
PPD1
D-GND
CED1
D-GND
LEDPPD1
1 2
D-GND
3
(AFE_DB4)
(AFE_DB3)
EN5V
(AFE_DB0)
(AFE_DB2)
(AFE_DB1)
(AFE_DB7)
(AFE_DB5)
(AFE_DB6)
mt_
at_
hom
e
OP-STB
D-GND
(VSAMP)
CCD-TG
P-GND
P-GND
OP-LATCH
PSL
ONL
PSW
FANLK
/VFMCNT
PGND
24V
/DMT_3
24VDu
pMT
/DMT_2
PMRDY
/PMD
D-GND
KEYIN1#
SELIN3
STROBE
VFMOUT
PPD2
D-GND
D-GND
RTH_IN
DR
ST
D-GND
D-GND
KIN1
SELIN3
OUTB+
OUTA-
OUTB-
OUTA+
D-GND
DR
ST
SELIN1
OP-CLK
D-GND
D-GND
PMCLK_A
3
DR
ST
D-GND
D-GND
LEDPOD
POD
5
SELIN2
KEYIN2#
PSW
D-GND
PSL
ONL
OP-DATA
EN5V
3 4 1 2 34 51 2
D-GND
53 4
VCL
VCL
12V
12V
8 1 2
D-GND
D-GND
P-GND
24V
1 2 3 4 1 2 1 253 46 72 1 132 2 3 4 5 2
P-GND
P-GND
VCL
VCL
12V
12V
EN5V
D-GND
(VSAMP)
CCD-TG
D-GND
CCD-R
S
(BSAMP)
CCD-CP
(AFE_
SDI)
CCD_PHI2
D-GND
CCD_PHI1
(AFE_
SEN)
(AFE_DB5)
VCL
P-GND
(AFE_DB6)
D-GND
(ADCLK)
D-GND
(AFE_
SCK)
(AFE_DB7)
MHP
S
(AFE_DB0)
(AFE_DB4)
(AFE_DB3)
(AFE_DB2)
(AFE_DB1)
D-GND
D-GND
24V
DV
SEL
TC
S
BIA
S
24V
TC
S
DV
SEL
BIA
S
F-GND
MC
/GRIDL
INT5V
INT24V
INT5V
INT24V
BC
/BIA
S
/TC
/GRIDL
/MC
D-GND
P-GND
D-GND
3.3VIN
EN5V
3.3VIN
5V/POFF
12VIN
24V
FW24V
/PR
HLOUT
P-GND
P-GND
D-GND
P-GND
D-GND
3.3VIN
EN5V
3.3VIN
5V/POFF
12VIN
24V
FW
P-GND
24V
/PR
HLOUT
P-GND
21 2D-GND
23 4 5 11
SHOLD
/SYNC
INT5V
D-GND
/LDEN
/VIDEO
/PMD
PMRDY
PMCLK_A
2 3
INT24V
/MMD
PGND
24V
GRID
MCFB
TC
/MC
/BIA
S
/TC
HLN
HLL
HLL
3HLN
/CPF
S1
1
INT24V
PGND
/MMD
1
24V
P-GND
PP
D2
Th
erm
isto
r
Fa
nM
T
PO
D
PO
LY
GO
NM
T
LD
TO
NE
RM
T
RE
SIS
TR
OL
LE
R
SO
LE
NO
ID
CA
SS
ET
TE
PA
PE
R
SO
LE
NO
ID
CE
D1 PP
D1
DSW
DR
ST
OP
E
PW
B
SC
AN
NE
R
MT
CC
D
PW
B
INV
ER
TE
R
PW
B
CL
CL
TC
SD
V
un
HV
TP
WB
PO
WE
R
SU
PP
LY
PW
BA
C-C
OR
D
12
0V
/60
Hz
MC
UP
WB
MA
INM
T
DU
PL
EX
MT
AL
MO
DE
LO
NL
Y
TH
ER
MO
ST
AT
HL
SC
AN
NE
R
UN
MP
FS
SO
LE
NO
ID
AL-2030/2040CS/2050CS ELECTRICAL SECTION 12 - 5
(2) SPF unit (2/2)
CN24
DHAI-0532Q
SP1
B12B-PH-K-S
24V
SPFMT
1
24V
SPFMT
2SPMT_0
3
SPMT_2
4
SPMT_1
5
SPMT_3
6
SPID
7
DGND
8
LED
SPID
9
SPPD
10
DGND
11
LED
SPPD
12
2DGND
3LED
SPPD
3LED
SPID
1SPPD
SPID
2DGND
3B
1/B
1
A
6/A
5COMA
2COMB
4
MC
U
PW
BS
PID
SP
MT
SP
FU
NIT
SP
PD
AL-2030/2040CS/2050CS ELECTRICAL SECTION 12 - 6
C. AL-2050CS
(1) MCU PWB (1/2)D
HA
I-05
19Q
SP
ZD
HA
I-02
87Q
SZ
ZC
N11
CN
3D
HA
I-05
17Q
SP
ZC
N30
2C
N30
3D
HA
I-02
70Q
SZ
Z1
LED
PP
D2
1LE
DP
PD
21
321
12
PP
D2
22
312
23
D-G
ND
33
303
429
528
2D
-GN
D2
B5B
-PH
-K-S
627
726
825
CN
169
2410
2311
2212
2113
20B
4B-P
H-K
-S14
1915
1816
1717
1618
15C
N27
1914
2013
2112
2211
2310
249
258
267
276
285
CN
2029
430
331
232
1
B05
B-X
AS
K-1
Dup
lex
Mod
elon
lyC
N22
1
DH
AI-
0286
QS
ZZ
CN
262 3 4
B4B
-PH
-K-R
B3B
-PH
-K-S
CN
4D
HA
I-02
68Q
SZ
41
1
DH
AI-
0530
QS
P1
CN
422
2
-HS
YN
C8
33
D-G
ND
74
4
+5V
65
5
56
6
-LD
EN
47
7
-VID
EO
38
8
-S/H
29
9
D-G
ND
110
10
B08
B-C
ZH
K-B
1111
1212
CN
213
1314
1415
15D
HA
I-05
29Q
SP
1C
N41
1616
15
1717
24
1818
319
19C
N3
220
201
2121
B05
B-C
ZH
K-B
2222
2323
2424
CN
2825
2526
26P
D1
2727
2828
B3B
-PH
-K-M
2929
3030
3131
3232
DH
AI-
0514
QS
PZ
CN
12FF
4-32
-S15
D5
1 2 3M
MLD
4M
MLD
/MM
CLK
5/M
MC
LKB
5B-P
AS
K-1
CN
25T
MA
_OT
MB
_OB
2P-V
H
CN
18C
N6
11
1/R
RS
22
23
66
B3B
-PH
-K-E
45
5B
4B-P
H-K
-R8
8
CN
15D
HA
I-05
15Q
SP
Z1
MC
12
B3B
-PH
-K-S
DH
AI-
0273
QS
ZZ
CN
2D
HA
I-05
25Q
SP
Z1
11
42
2D
HA
I-02
69Q
SZ
ZC
N21
33
CE
D1
14
4D
HA
I-02
92Q
SZ
ZD
-GN
D2
55
16
6B
3B-P
H-K
-K7
78
8D
HA
I-02
67Q
SP
ZB
24B
-PN
DZ
S-1
1
DH
AI-
0289
QS
ZZ
CN
24
CN
2D
HA
I-05
25Q
SP
Z
B3B
-PH
-K-R
91
102
DH
AI-
0510
QS
P1
(for
100V
area
)11
3D
HA
I-05
36Q
SP
Z(f
or20
0Var
ea)
124
HLL
1C
N14
135
21
11
146
HLN
22
215
73
168
DH
AI-
0511
QS
P1
(for
100V
area
)4
179
DH
AI-
0537
QS
PZ
(for
200V
area
)5
1810
For
120V
area
B5B
-PH
-K-R
1911
2012
2113
L1
DH
AI-
0272
QS
ZZ
CN
1022
14N
223
1524
16
B2P
-VH
-RB
24B
-PN
DZ
S-1
For
200V
area
DH
AI-
0491
QS
ZZ
MC
FB
GR
ID
TC
BC
124
VD
upM
T
(AF
E_D
B6)
D-G
ND
(AF
E_D
B4)
(AF
E_D
B3)
(AF
E_S
CK
)
mt_
at_h
ome
(AF
E_D
B5)
AC
VO
UT
(AF
E_D
B2)
1D
-GN
DG
ND
3
CC
D_P
HI1
(AF
E_S
EN
)(A
FE
_SE
N)
(AD
CLK
)(A
DC
LK)
CC
D_P
HI1
CC
D_P
HI2
VC
LD
-GN
DP
-GN
D
CC
D-C
PG
ND
3(A
FE
_SD
I)
(BS
AM
P)
(BS
AM
P)
AC
VO
UT
1
D-G
ND
D-G
ND
CC
D-R
SC
CD
-RS
(VS
AM
P)
(VS
AM
P)
CC
D-T
GC
CD
-TG
EN
5VE
N5V
D-G
ND
D-G
ND
12V
12V
12V
12V
VC
LV
CL
VC
LV
CL
OU
TB
-
P-G
ND
P-G
ND
P-G
ND
P-G
ND
/SF
TM
T_3
OU
TA
+O
UT
B+
OU
TA
-
5V D-G
ND
VC
C3
D-G
ND
/SF
TM
T_0
3/S
FT
MT
_14
/SF
TM
T_2
LCD
E
3/D
MT
_1
LCD
RS
LCD
CO
NT
BZ
R
LCD
RS
/DM
T_0
124
VS
FT
MT
24V
/MP
FS
24V
24V
1(D
SW
S)
5 MF
DD
GN
D
3
PP
D1
D-G
ND
CE
D1
D-G
ND
LED
PP
D1
1 2D
-GN
D3
(AF
E_D
B1)
(AF
E_D
B0)
(AF
E_D
B7)
FA
NLK
/VF
MC
NT
PG
ND
CC
D-C
P(A
FE
_SD
I)C
CD
_PH
I2D
-GN
D
OP
_LA
TC
H
PS
W
LCD
D6
LCD
D5
PS
LD
RS
T
D-G
ND
24V
/DM
T_3
/DM
T_2
PM
RD
Y/P
MD
D-G
ND
D-G
ND
BL
INF
OLE
DO
P_L
AT
CH
VF
MO
UT
PP
D2
D-G
ND
D-G
ND
RT
H_I
N
DR
ST
D-G
ND
D-G
ND
BL
INF
OLE
D
BZ
RLC
DC
ON
T
D-G
ND
OP
_CLK
LCD
D7
LCD
D4
OP
_CLK
OP
_DA
TA
PS
W
D-G
ND
PM
CLK
_A
3
DR
ST
D-G
ND
D-G
ND
LED
PO
DP
OD
5
OP
_DA
TA
LCD
ELC
DD
4
LCD
D7
LCD
D6
LCD
D5
PS
LD
RS
T
3 4 1 2 34 522 5
D-G
ND
53 4 8 1 2
D-G
ND
P-G
ND
24V
1 253 4 1 2 1 132 2
D-G
ND
(AF
E_S
CK
)(A
FE
_DB
7)M
HP
S(A
FE
_DB
5)(A
FE
_DB
6)D
-GN
D(A
FE
_DB
4)(A
FE
_DB
3)(A
FE
_DB
2)
(AF
E_D
B1)
(AF
E_D
B0)
D-G
ND
D-G
ND
24V
DV
SE
LT
CS
BIA
S
24V
TC
SD
VS
EL
BIA
SF
-GN
D
/GR
IDL
INT
5VIN
T24
V
P-G
ND
INT
5VIN
T24
VP
-GN
D
/BIA
S
/GR
IDL
/MC
D-G
ND
/MC
5V /PO
FF
12V
IN
P-G
ND
D-G
ND
3.3V
INE
N5V
24V
FW
24V
/PR
HLO
UT
P-G
ND
P-G
ND
D-G
ND
P-G
ND
D-G
ND
3.3V
INE
N5V
3.3V
IN5V
1
P-G
ND
24V
/PR
HLO
UT
P-G
ND
/PO
FF
12V
IN24
VF
W
1
SH
OLD
/SY
NC
INT
5VD
-GN
D
/LD
EN
/VID
EO
6 72
/PM
DP
MR
DY
PM
CLK
_A
2 3
INT
24V
/MM
DP
GN
D
24V
/CP
FS
1
1
INT
24V
PG
ND
/MM
D
223 4 5
HLN
HLL
3
P-G
ND
/BIA
S/T
C
P-G
ND
3.3V
IN
/TC
1
24V
P-G
ND
KE
YIN
SE
LIN
3S
ELI
N2
SE
LIN
1D
-GN
DE
N5V
D-G
ND
KE
YS
C1
KE
YS
C2
KE
YS
C3
1 21 2 3 4
KE
YS
C1
KE
YS
C2
KE
YS
C3
KE
YIN
SE
LIN
3S
ELI
N2
SE
LIN
1D
-GN
D
VC
C3
D-G
ND
EN
5VD
-GN
D5V D
-GN
D
PP
D2
Th
erm
isto
r
Fan
MT
PO
D
PO
LY
GO
NM
T
LD
TO
NE
RM
T
RE
SIS
TR
OL
LE
RS
OL
EN
OID
CA
SS
ETT
EP
AP
ER
SO
LEN
OID
CE
D1 PP
D1
DS
W
DR
ST
LC
D_O
PE
PW
B
TC
SD
V un
HV
TP
WB
PO
WE
RS
UP
PL
YP
WB
AC
-CO
RD
MC
UP
WB
MA
INM
T
DU
PL
EX
MT
AL
MO
DE
LO
NLY
TH
ER
MO
ST
AT
HL
MP
FS
SO
LE
NO
ID
SH
IFT
ER
MT
SC
AN
NE
RM
T
CC
DP
WB
INV
ER
TE
RP
WB
CC
FL
CC
FL
SC
AN
NE
RC
arri
age
UN
AC
-IN
LET
AC
-CO
RD
AL-2030/2040CS/2050CS ELECTRICAL SECTION 12 - 7
(2) RSPF section (2/2)
CN
30D
HA
I-05
33Q
SP
ZD
HA
I-05
41Q
SP
Z
DH
AI-
0540
QS
PZ
DH
AI-
0539
QS
PZ
B24
B-P
ND
ZS
-1
/B CO
MB
B A /A
24V
12
SR
VC
2
2_S
PU
S2
11S
PID
11
24V
1
3LE
D_S
PID
32
D-G
ND
2
1
21
SP
PD
1
3LE
D_S
RJD
32
D-G
ND
21
SR
JD
SP
ID2
DG
ND
3LE
DS
PID
1S
CO
D2
DG
ND
3LE
D_S
PP
D3
2D
-GN
D
2D
GN
D3
LED
SP
PD
3LE
DS
RJD
1S
PP
D
LED
SC
OD
SR
JD2
DG
ND
1 6313 1 5C
OM
A
2 4
LED
_SR
JD1
LED
_SP
PD
2
DG
ND
3
DG
ND
4
SR
JD5
SP
PD
6LE
D_S
CO
D7
LED
_SP
ID8
DG
ND
9
DG
ND
10
SC
OD
11
SP
ID12
NC
15
SP
MT
_116
24V
SP
FS
OL
13
24V
SP
FS
OL
17
SP
MT
_218
SP
MT
_314
SP
US
19
SP
MT
_020
24V
SP
FS
OL
21
24V
SP
FM
T22
SR
VC
23
24V
SP
FM
T24
MC
UP
WB
SR
JD
SP
MT
RS
PF
UN
IT
SP
PD
SC
OD
SP
ID
SP
US
SR
VC
AL-2030/2040CS/2050CS ELECTRICAL SECTION 12 - 8
D. AL-2040CS/2050CS
(1) 2nd cassette unit (1/2)
(2) NIC PWB (2/2)
3. Signal name listSignal name Name Function/Operation Section
LEDPPD2 PPD2 sensor power Fusing sectionPPD2 PPD2 sensor Paper transport detection Fusing sectionRTH_IN Thermistor Fusing section thermistor temperature detection Fusing sectionFANLK Fusing fan Fan lock detection signal Optical section MHPS MHPS sensor Carriage HP detection Optical section /MPFS Multi bypass solenoid Optical section /VFMCNT Fan speed signal Fan rotation speed control Optical section VFMOUT Fusing fan Fan drive signal Optical section /DMT_0 DUP motor DUP motor phase control Duplex drive section /DMT_1 DUP motor DUP motor phase control Duplex drive section /DMT_2 DUP motor DUP motor phase control Duplex drive section /DMT_3 DUP motor DUP motor phase control Duplex drive section LEDPOD POD sensor power Paper exit section POD POD sensor Paper transport detection Paper exit section PMCLK_A Polygon motor Clock signal to the polygon motor LSU PMRDY Polygon motor Polygon motor ON/OFF detection signal LSU /PMD Polygon motor Polygon motor drive signal LSU
DHAI-0306QSZZ CN18
B14B-PHDSS-B
CED2 1
D-GND 2
1 24V 1
D-GND 1
5V 3
PPD3 2
5
10
PD2 1
D-GND 2
D-GND
/CPFS2
24V
5V
PPD3
D-GND
PD2
D-GND
CED2
3
5
6
9
1
2
4
7
8
11
12
13
14
10
3
9
10
14
6
3
9
D-GND
CED2
D-GND
FG
4
2
1
5
PD2 96
9
11
13
8 PPD3 7
7 D-GND 8
13 24V 2
11 5V 4
14 /CPFS2 12 /CPFS2 2
MCU PWB
CPFS2
PPD3
PD2
CED2
2nd CASSETTE UN
CN1 DHAI-0518QSPZ CN39
24FMN-BTK-A
VCC3
5V
5V
D-GND
P2
P1
P0
/RESET
P6
P5
P4
P3
PFRR
PBSY
/PACK
P7
23
24
D-GND
DIR3
/IT3
/SELIN3
/AFFFD3
/STB
/FLT
SLCT
19
20
21
22
15
16
17
18
11
12
13
14
7
8
9
10
3
4
5
6
EN5V2
D-GND1
VCC34
EN5V3
PARAD06
/OA_RST5
PARAD28
PARAD17
PARAD410
PARAD39
PARAD612
PARAD511
/ACK14
PARAD713
PE16
BUSY15
/FAULT18
SLCT17
/AUTOFD20
/STB19
/INIT22
/SLCTIN21
D-GND24
/REV23
1
2
MCU
PWB
NIC
PWBTO
NETWORK
AL-2030/2040CS/2050CS ELECTRICAL SECTION 12 - 9
/LDEN Laser Laser circuit control signal LSU SHOLD Laser Laser APC signal LSU /SYNC Laser Horizontal sync signal from the LSU LSU /VIDEO Laser Laser drive signal LSU PD1 PD SW sensor 1st CS paper width sensor Not used /MMCLK Main motor Clock signal to the polygon motor Main drive section /MMD Main motor Polygon motor drive signal Main drive section MMLD Main motor Polygon motor ON/OFF detection signal Main drive section TMA_O Toner motor Toner motor phase control Toner motor drive section TMB_O Toner motor Toner motor phase control Toner motor drive section CED1 Machine cassette detection Paper transport section /CPFS1 1st CS pickup solenoid Paper transport section LEDPPD1 PPD sensor power Paper transport section PPD1 PPD sensor Paper transport detection Paper transport section /RRS 1st transport solenoid Paper transport section BZR Buzzer signal Buzzer Operation section DRST Drum reset detection CRU initial detection Operation section KEYIN Key scan input Key detection control Operation section KEYIN1# Key scan input Key detection control Operation section KEYIN2# Key scan input Key detection control Operation section KEYSC1 Key scan output Key scan output Operation section KEYSC2 Key scan output Key scan output Operation section KEYSC3 Key scan output Key scan output Operation section LCDCON LCD control signal Signal for LCD Operation section LCDDB4 LCD data signal Signal for LCD Operation section LCDDB5 LCD data signal Signal for LCD Operation section LCDDB6 LCD data signal Signal for LCD Operation section LCDDB7 LCD data signal Signal for LCD Operation section LCDE LCD control signal Signal for LCD Operation section LCDRS LCD control signal Signal for LCD Operation section ONL Online LED Operation section OP-CLK LED driver control Operation section OP-DATA LED driver control Operation section OP-LATCH LED driver control Operation section PSL Power save LED Operation section PSW Start button control Operation section SELIN1 Select signal 1 HC151 select signal Operation section SELIN2 Select signal 2 HC151 select signal Operation section SELIN3 Select signal 3 HC151 select signal Operation section STROBE LED driver control Operation section OUTA+ Scanner motor Scanner motor phase control Optical drive section OUTA- Scanner motor Scanner motor phase control Optical drive section OUTB+ Scanner motor Scanner motor phase control Optical drive section OUTB- Scanner motor Scanner motor phase control Optical drive section (ADCLK) AFE AFE control signal Scanner unit section (AFE_DB0) AFE Image scan data Scanner unit section (AFE_DB1) AFE Image scan data Scanner unit section (AFE_DB2) AFE Image scan data Scanner unit section (AFE_DB3) AFE Image scan data Scanner unit section (AFE_DB4) AFE Image scan data Scanner unit section (AFE_DB5) AFE Image scan data Scanner unit section (AFE_DB6) AFE Image scan data Scanner unit section (AFE_DB7) AFE Image scan data Scanner unit section (AFE_SCK) AFE AFE control signal Scanner unit section (AFE_SDI) AFE AFE serial data Scanner unit section (AFE_SEN) AFE AFE control signal Scanner unit section (BSAMP) AFE AFE control signal Scanner unit section (VSAMP) AFE AFE control signal Scanner unit section CCD-CP CCD CCD control signal Scanner unit section CCD-RS CCD CCD control signal Scanner unit section CCD-TG CCD CCD control signal Scanner unit section CCD_PHI1 CCD CCD control signal Scanner unit section CCD_PHI2 CCD CCD control signal Scanner unit section VCL Copy lamp Copy lamp control Scanner unit section
Signal name Name Function/Operation Section
AL-2030/2040CS/2050CS ELECTRICAL SECTION 12 - 10
DVSEL Developing tank detection Developing section TCS Toner sensor Toner quantity detection Developing section /BIAS HV bias signal HV bias drive Process section /GRIDL HV grid signal Main charger grid control Process section /MC HV MC signal Main charger control Process section /TC HV TC signal Transfer charger grid control Process section /POFF Low voltage power Output power control Power section FW Low voltage power Zero cross detection Power section /PR Heater lamp Power relay control Power section HLOUT Heater lamp Heater lamp control Power section LEDSCOD SCOD sensor power SPF/RSPF sectionLEDSPID SPID sensor power SPF/RSPF sectionLEDSPPD SPPD sensor power SPF/RSPF sectionLEDSRJD SRJD sensor power SPF/RSPF section/RSV_SOL Reverse solenoid SPF/RSPF sectionSCOD SCOD sensor SPF/RSPF cover open sensor SPF/RSPF sectionSPID SPID sensor SPF/RSPF UN paper entry sensor SPF/RSPF sectionSPMT_0 SPF/RSPF motor SPF/RSPF motor phase control SPF/RSPF sectionSPMT_1 SPF/RSPF motor SPF/RSPF motor phase control SPF/RSPF sectionSPMT_2 SPF/RSPF motor SPF/RSPF motor phase control SPF/RSPF sectionSPMT_3 SPF/RSPF motor SPF/RSPF motor phase control SPF/RSPF sectionSPPD SPPD sensor SPF/RSPF transport detection SPF/RSPF section/SPUS Paper feed solenoid SPF/RSPF sectionSRJD SRJD sensor SPF/RSPF paper exit sensor SPF/RSPF section/SRVC Reverse clutch SPF/RSPF sectionCED2 2nd CS cassette detection 2nd cassette section /CPFS2 2nd CS pickup solenoid 2nd cassette section PD2 PD2 SW sensor 2nd CS paper width detection 2nd cassette section PPD3 PPD3 sensor 2nd CS paper transport detection 2nd cassette section /ACK IEEE1284 /ACK signal Network section /AUTOFD IEEE1284 /AUTOFD signal Network section BUSY IEEE1284 BUSY signal Network section /FAULT IEEE1284 /FAULT signal Network section /INIT IEEE1284 /INIT signal Network section PARAD0 IEEE1284 Data bus Network section PARAD1 IEEE1284 Data bus Network section PARAD2 IEEE1284 Data bus Network section PARAD3 IEEE1284 Data bus Network section PARAD4 IEEE1284 Data bus Network section PARAD5 IEEE1284 Data bus Network section PARAD6 IEEE1284 Data bus Network section PARAD7 IEEE1284 Data bus Network section PE IEEE1284 PE signal Network section /REV IEEE1284 /REV signal Network section SLCT IEEE1284 SLCT signal Network section /SLCTIN IEEE1284 /SLCTIN signal Network section /STB IEEE1284 /STB signal Network section /OA_RST Option reset Reset signal to the NIC PWB Network section USB +D USB signal USB section USB -D USB signal USB section /SFTMT0 Shifter motor Shifter motor phase control Shifter motor section/SFTMT1 Shifter motor Shifter motor phase control Shifter motor section/SFTMT2 Shifter motor Shifter motor phase control Shifter motor section/SFTMT3 Shifter motor Shifter motor phase control Shifter motor section
Signal name Name Function/Operation Section
AL-2030/2040CS/2050CS ELECTRICAL SECTION 12 - 11
[13] CIRCUIT DIAGRAM
1. MCU PWB (AL-2030/2040CS)5 5
4 4
3 3
2 2
1 1
DD
CC
BB
AA
(SIN
2)
/STBY
/CS
3#
DM
T3
D2
AR
B_I
NT
(SP
PD
)
/WDTOVF
D7
ON
L
AR
B_I
NT
/WD
TO
VF
/CS
5
SC
L
D6
/CS
2#
DM
T2
(SIN
3)
SD
A
D4
/SC
AN
ST
/SC
AN
SP
#
NMI
D2
D10
/ST
BY
/CS
1#
D5
D3
/CS
0#
/CS
3#
DM
T0
A20
D10
CC
D_T
G
SP
FM
T1
/RD
#
D4
(FW
)
D11
D8
(KE
YIN
1)
D8
/LW
R#
D3
D0
/HW
R#
D15
D5
/CS
1#
/SC
AN
ST
PO
FF
/TR
AN
SS
TD
9
SP
FM
T3
/LW
R#
D1
CP
U_S
YN
C
/HW
R#
D9
SP
FM
T2/
MIR
CN
TD
6
(SIN
1)
D11
A12
CP
U_S
YN
C
D13
/SC
AN
SP
#
/CS
0#
/RD
#
DM
T1
/TR
AN
SS
T
D1
MC
NT
A8
CP
UC
LK(N
C)
NM
I
(FW
)
D14
D12
D0
SP
FM
T0
D7
SP
FM
T1
SP
FM
T3
SP
FM
T0
SP
FM
T2/
MIR
CN
T
/ES
SR
DY
RY
/BY
CR
UM
SC
L/P
RIN
TS
T
EX
TA
L
XT
AL
(KE
YIN
2)
/PR
INT
ST
TxD
SD
AR
xDS
CL
PO
FF
/ES
_PA
GE
/MS
U_S
T1
MC
NT
RY
/BY
/ES
SR
DY
(KE
YIN
2)
TxD R
xDC
RU
MS
DT
A
RE
SE
TO
UT
1
ST
RO
BE
ST
RO
BE
A0A1A2A3
A4A5A6A7
A9A10A11
A13A14A15A16A17A18A19
(PS
W)
D12
D13
D14
D15
/CS
5C
RU
MS
DT
AC
RU
MS
CL
RE
SE
TO
UT
1M
MC
LKD
MT
3D
MT
2D
MT
1D
MT
0
XTALEXTAL
CPUCLK(NC)
/ES
_PA
GE
/MS
U_S
T1
PS
L
/CS
2#
CC
D_T
G
VC
C3
CP
U3.
3
VC
C3
CP
U3.
3
VC
C3
VC
C3
VC
C3
RT
H(5
)
(SIN
2)(4
)SE
LIN
1(4
)
(SIN
3)(4
)
SP
FM
T1
(4)
DM
T0
(6)
(SIN
1)(4
)
/CS
1(3
)
CC
D_T
G(2
,4)
DM
T3
(6)
/CS
0(3
)
D_C
ON
T(4
)
DM
T2
(6)
/LW
R(2
)
D[1
5..0
](2
,3)
SP
FM
T3
(4)
A[2
0..0
](2
,3)
/RE
SE
T0
(2,3
,4)
ST
RO
BE
(4)
/TR
AN
SS
T(2
)
CP
U_S
YN
C(2
)
(SP
PD
)(7
)
/RD
(2,3
)
/SC
AN
SP
(2)
AR
B_I
NT
(2)
/RESET1(2,4)
(FW
)(4
)
SE
LIN
3(4
)
SP
FM
T0
(4)
/SC
AN
ST
(2)
DM
T1
(6)
/CS
2(2
)
PM
CLK
(5)
(PS
W)
(7)
/HW
R(3
)
SP
FM
T2/
MIR
CN
T(4
)
/AS
IC_R
ST
(2,4
,12)
SE
LIN
2(4
)M
MC
LK(5
)
/PR
INT
ST
(2)
PO
FF
(2,5
)T
xD(9
)S
DA
(3)
RxD
(9)
SC
L(3
)(U
SB
_IN
)(4
)
(KE
YIN
2)(4
)
(TC
S_A
N)
(5)
(KE
YIN
1)(4
)
RY
/BY
(3)
ON
L(8
)C
RU
MS
DT
A(1
2)C
RU
MS
CL
(12)
PS
L(8
)
mt_
at_h
ome#
(4)
MC
NT
(5)
MC
U P
WB
(C
PU
sec
tio
n)
(AL
-203
0/20
40C
S)
Res
et C
ircu
it
AS
IC_R
ES
ET
TP
226
TP
253
TP
180
TP162TP139
C200.1u C200.1u
TP
201
C250.1u C250.1u
TP167
BR
8
10kJ
x4
1 2 3 4
8 7 6 5
R26
110
kJ
TP
222
TP
10
TP
242
TP172TP150
BR2233Jx4
1234
8765
BR
10
10kJ
x4
1 2 3 4
8 7 6 5
TP227
TP
185
TP163TP140
R4
*1
TP
254
TP
181
C26
47p
TP
202
TP
6TP168
BR2333Jx4
1234
8765
BR
3
10kJ
x4
1 2 3 4
8 7 6 5
TP
24
IC2
H8S
/232
1
HD
6412
321V
F25
(H8S
/232
1)
IC2
P35
/SC
K1
64
P34
/SC
K0
63
P33
/RxD
162
P32
/RxD
061
P31
/TxD
160
P30
/TxD
059
VC
C58
PD
7/D
1557
PD
6/D
1456
PD
5/D
1355
PD
4/D
1254
Vss
53
PD
3/D
1152
PD
2/D
1051
PD
1/D
950
PD
0/D
849
PE
7/D
748
PE
6/D
647
PE
5/D
546
PE
4/D
445
Vss
44
PE
3/D
343
PE
2/D
242
PE
1/D
141
PE
0/D
040
VC
C39
AV
cc10
3
Vre
f10
4
P40
/AN
010
5
P41
/AN
110
6
P42
/AN
210
7
P43
/AN
310
8
P44
/AN
410
9
P45
/AN
511
0
P46
/AN
6/D
A0
111
P47
/AN
7/D
A1
112
AV
ss11
3
Vss
114
P17
/PO
15/T
IOC
B2/
TC
LKD
115
P16
/PO
14/T
IOC
A2
116
P15
/PO
13/T
IOC
B1/
TC
LKC
117
P14
/PO
12/T
IOC
A1
118
P13
/PO
11/T
IOC
D0/
TC
LKB
119
P12
/PO
10/T
IOC
C0/
TC
LKA
120
P11
/PO
9/T
IOC
B0/
DA
CK
112
1
P10
/PO
8/T
IOC
A0/
DA
CK
012
2
MD
012
3
MD
112
4
MD
212
5
PG
0/C
AS
126
PG
1/C
S3
127
PG
2/C
S2
128
PG3/CS11
PG4/CS02
Vss3
NC4
VCC5
PC0/A06
PC1/A17
PC2/A28
PC3/A39
Vss10
PC4/A411
PC5/A512
PC6/A613
PC7/A714
PB0/A815
PB1/A916
PB2/A1017
PB3/A1118
Vss19
PB4/A1220
PB5/A1321
PB6/A1422
PB7/A1523
PA0/A1624
PA1/A1725
PA2/A1826
PA3/A1927
Vss28
PA4/A20/IRQ429
PA5/A21/IRQ530
PA6/A22/IRQ631
PA7/A23/IRQ732
P67/CS7/IRQ333
P66/CS6/IRQ234
Vss35
Vss36
P65/IRQ137
P64/IRQ038
P53/ADTRG102
P52/SCK2101
Vss100
Vss99
P51/RxD298
P50/TxD297
PF0/BREQ96
PF1/BACK95
PF2/LCAS/ WAIT/BREQO94
PF3/LWR93
PF4/HWR92
PF5/RD91
PF6/AS90
VCC89
PF7/088
Vss87
EXTAL86
XTAL85
VCC84
STBY83
NMI82
RES81
WDTOVF80
P20/PO0/TIOCA379
P21/PO1/YICOB378
P22/PO2/TIOCC377
P23/PO3/TIOCD376
P24/PO4/TIOCA475
P25/PO5/TIOCB474
P26/PO6/TIOCA573
P27/PO7/TIOCB572
P63/TEND171
P62/DREQ170
P61/TEND0/CS569
Vss68
Vss67
P60/DREQ0/CS466
Vss65
TP
261
TP151
TP
243
TP173
TP
245
TP
186
R25
22k
J
TP228
TP
182
BR2433Jx4
1234
8765
TP141
TP
154
TP
131
BR
6
10kJ
x4
1 2 3 4
8 7 6 5
TP
203
TP
8
TP
195
TP169
C2
0.1u
C160.1u
TP
25
BR2533Jx4
1234
8765
R17
10kJ
R12
33J
TP174
TP
246
TP152
TP
244
TP210
C4
100p
C4
100p
R26
210
kJ
TP142
TP229
TP
187
TP
183
TP
132
TP
204
TP
255
TP
155
BR2633Jx4
1234
8765
R8
*4
TP
196
BR
11
10kJ
x4
1234
8765
R25
010
kJ
TP170
R2
N.M
.N
.M.
R13
33J
TP
258
C1222pF
TP153
R24
810
kJ
TP175
TP247
TP143
TP
235
BR
1733
Jx4
1 2 3 4
8 7 6 5
TP211
TP
188
TP230 TP230
C14N.M.
TP
184
BR
7
10kJ
x4
1 2 3 4
8 7 6 5
TP156TP133
TP
205
C13N.M.
TP
256
TP
197
C6
12p
IC3 BU
4212
F
IC3 GN
D1
VD
D2
CT
3
VO
UT
4
C15N.M.
BR
1833
Jx4
1 2 3 4
8 7 6 5R1633J
R14
33J
BR
15
10kJ
x4
1 2 3 4
8 7 6 5
R22
10kJ
R26
310
kJ
TP
1
R24
610
kJ
TP
259
TP176
TP
248
R1
N.M
.
TP
126
TP212
TP144
TP
236
TP
231
R21
33J
TP
189
X1
HC
-49U
/S19
.660
8MH
z
TP
262
BR
1933
Jx4
1 2 3 4
8 7 6 5
TP
206
TP
257
TP157TP134
BR
12
10kJ
x4
1234
8765
TP
198
C210.1u C210.1u
TP
193
TP
30
R19
10kJ
TP
260
BR
2033
Jx4
1 2 3 4
8 7 6 5
TP7
TP
267
TP
127
TP
177
TP
2
C220.1u C220.1u
TP
237
TP213
R3
*2
TP145
R9
33J
BR
21
33Jx
4
1234
8765
TP
232
R5
N.M
.
TP
190
TP
263
TP158TP135
C230.1u C230.1u
TP
207
TP
199
C733p
R42
110
kJT
P19
4
C101uF
C240.1u C240.1u
R24
510
kJ(o
pen)
TP
31
C78
100p
TP
218
C17
0.01
uF
TP
250
+
C19
10u/
16V
+
C19
10u/
16V
TP
128
TP214
TP146
TP
238
TP
233
TP
191
TP223
R6
0J
TP159TP136
TP
208
C833p
R7
*3
C3
100p
C3
100p
C5
*5
TP164
C933p
BR
1
10kJ
x4
1 2 3 4
8 7 6 5
R25
12k
J
TP
32
L11
0J (
1608
)L1
10J
(16
08)
TP219
TP
129
TP
251
TP215
TP147
TP
239
TP
234
TP
192
BR
14
10kJ
x4
1 2 3 4
8 7 6 5
TP
224
R20
100k
J
TP137
TP
209
TP
249
TP
178
TP160
R24
9N
.M._
10kJ
TP165
R11
100J
TP
33
TP
220
L1 ZJS
R51
01-2
23(o
pen)
L1 ZJS
R51
01-2
23(o
pen)
TP
130
TP148
TP
240
TP216
BR
16
10kJ
x4
1234
8765
R18
33J
TP225
TP
179
TP161TP138
TP
252
R24
710
kJ
BR
2
10kJ
x4
1 2 3 4
8 7 6 5
TP
200
IC1
N.M
._C
Y25
811S
C
XIN
/CLK
IN1
XO
UT
8V
DD
7
VS
S2
SS
CLK
5F
RS
EL
6
S0
4
S1
3
C18
N.M
.
TP166
C1
*6
TP
125
TP221
TP
9
R10
33J
BR
5
10kJ
x4
1 2 3 4
8 7 6 5
TP171
TP217
TP149
TP
241
C11
N.M
.
1/13
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 1
PF
CLK
IN
PFCLKOUT
/INR
EQ
SY
NC
#
AF
E_D
B0
AF
E_D
B7
AF
E_D
B4
AF
E_D
B5
AF
E_D
B6
AF
E_D
B1
AF
E_D
B2
AF
E_D
B3
/OU
TA
CK
/PC
LPR
O/F
AX
PR
O/E
SP
RD
CLK
_CO
NT
/OU
TC
S
MM
_BI1
MM
_AI0
MM
_BI2
MM
_BI0
MM
_AI2
MM
_AI1
/AU
TO
FD
/SLC
TIN
/INIT
/ST
B
PA
RA
D7
PA
RA
D3
PA
RA
D4
PA
RA
D5
PA
RA
D6
PA
RA
D1
PA
RA
D2
PA
RA
D0
VM
IN
RC
VV
PIN
AF
E_D
B7
AF
E_D
B6
AF
E_D
B3
AF
E_D
B5
AF
E_D
B2
AF
E_D
B1
AF
E_D
B4
AF
E_D
B0
AF
E_S
DI
RA
MD
B0
RA
MD
B3
RA
MD
B2
RA
MD
B1
RA
MD
B5
RA
MD
B4
RA
MD
B7
RA
MD
B6
RA
MD
B12
RA
MD
B14
RA
MD
B15
RA
MD
B13
RA
MD
B8
RA
MD
B9
RA
MD
B10
RA
MD
B11
VM
IN
JTG
_TD
IJT
G_T
MS
JTG
_TC
K
PF
CLK
JTG
_TD
O
/PIR
EQ
/PO
AC
K
PO
DA
TA
3P
OD
AT
A2
PO
DA
TA
1P
OD
AT
A0
PO
DA
TA
7P
OD
AT
A6
PO
DA
TA
5P
OD
AT
A4
ME
M_I
NT
CLK
SW
CLK
_CO
NT
CLK
_CO
NT
SF
CLK
48
AF
E_S
DI
MT
AD
0M
TA
D1
MT
AD
2M
TA
D3
MT
AD
4M
TA
D5
MT
AD
6M
TA
D7
/AU
TO
FD
/SLC
TIN
/INITSLC
TP
EB
US
Y/A
CK
FA
ULT
/RE
V
PA
RA
D7
PA
RA
D6
PA
RA
D5
PA
RA
D4
PA
RA
D3
PA
RA
D2
PA
RA
D1
PA
RA
D0
MM
_BI0
MM
_AI0
MM
_AI1
MM
_AI2
PO
DA
TA
1
PIDATA4
MTAD1
/PCLPRO
A7
D1
/INREQ
A1
PF
CLK
OU
T
CLKSW
PO
DA
TA
0
/PIR
EQ
MTAD8
MTAD12
A5
D6
JTG_TMS
MTAD0
/OUTACK
A2
D0
D7
PO
DA
TA
3
SFCLK48
D10
D12
PIDATA0
MTAD7
MTAD11
A8
D5
D15
A6
VP
IN
PO
DA
TA
6
/PO
AC
K
/OUTCS
D14
PO
DA
TA
5
PO
DA
TA
2
PIDATA1
MTAD4
MTAD10SYNC#
JTG_TCK
JTG_TDI
PIDATA5
RAM_CLK_OUT
MTAD15
MM
_BI2
PFCLK
D9D8
PIDATA2
MTAD3
RC
V
JTG_TDO
PIDATA6
A3
A9
D2
MTAD5
MTAD14
MM
_BI1
PIDATA3
MTAD2
D3
D11
D13
PO
DA
TA
7
PO
DA
TA
4
PIDATA7
/ESPRD
MEM_INT
/ST
B
PFCLKIN
MTAD6
MTAD9
MTAD13
/FAXPRO
A4
D4
RA
M_C
LK_O
UT
MA
D3
MA
D2
MA
D1
MA
D0
MA
D10
MA
D12
MA
D11
MA
D9
MA
D8
MA
D7
MA
D6
MA
D5
MA
D4
RA
MD
B7
RA
MD
B6
RA
MD
B5
RA
MD
B4
RA
MD
B3
RA
MD
B2
RA
MD
B1
RA
MD
B0
RA
MD
B15
RA
MD
B14
RA
MD
B13
RA
MD
B12
RA
MD
B11
RA
MD
B10
RA
MD
B9
RA
MD
B8
MT
AD
8M
TA
D9
MT
AD
10M
TA
D11
MT
AD
12M
TA
D13
MT
AD
14M
TA
D15
PID
AT
A0
PID
AT
A1
PID
AT
A2
PID
AT
A3
PID
AT
A4
PID
AT
A5
PID
AT
A6
PID
AT
A7
G3.
3V
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
G3.
3V
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
MM
_Y2
(5)
/SD
WD
E(3
)
CC
D_C
P(4
)
HL
(5)
(/S
YN
C)
(4)
MRPS2 (5)
VFM_24V (5)
DQ
M1
(3)
/LWR (1)
TM
(4)
VFMCNT_12V (5)
MM
_Y1
(5)
/LEND (5)
CC
D_T
G(1
,4)
MC (5)
PR
(5)
/SC
AN
SP
(1)
BIAS (5)
MM
_PH
_B(6
)
VS
AM
P(4
)
RRS (5)
MP
FS
(5)
CPFS1 (5)
/SD
RA
S(3
)
MM
_Y3
(5)
CC
D_P
HI1
(4)
/CS2 (1)
/RD (1,3)
MMD (5)
SD
CLK
(3)
MM
_PH
_A(6
)
TM
_(4
)
VIDEO# (4)
TC (5)
MM
_BI0
(6)
AF
E_S
CK
(4)
D[1
5..0
](1
,3)
MIRCNT (4)
CC
D_P
HI2
(4)
PTPULSE (5)
/SD
CS
(3)
MM
_AI0
(6)
OP
_LA
TC
H(4
)
CL
(10)
MA
D[1
2..0
](3
)
BA
NK
0(3
)
MM
_BI1
(6)
LDEN (5)
/RESET0
(1,3,4)
A[2
0..0
](1
,3)
RA
MD
B[1
5..0
](3
)
CP
FS
2(5
)
/TR
AN
SS
T(1
)
SD
CK
E(3
)
AF
E_S
EN
(4)
MRPS3 (5)
MIR
ON
(4)
/ASIC_RST (1,4,12)
OP
_CLK
(4)
MRPS1 (5)
BS
AM
P(4
)
GRIDL (5)
SP
FO
N(4
)
MM
_AI1
(6)
DQ
M0
(3)
OP
_DA
TA
(4)
CC
D_R
S(4
)
PMD (5)
/SD
CA
S(3
)
AD
CLK
(4) A
FE
_DB
[7..0
](4
)
VP
OU
T(1
1)V
MO
UT
(11)
OE
N(1
1)
SU
SP
EN
D(1
1)
VM
IN(1
1)
/PR
INT
ST
(1)
VP
IN(1
1)R
CV
(11)
/SC
AN
ST
(1)
AF
E_S
DI
(4)
PO
FF
(1,5
)PA
RA
D[7
..0]
(13)
/RE
V(1
3)/F
AU
LT(1
3)
/AC
K(1
3)B
US
Y(1
3)P
E(1
3)S
LCT
(13)
/INIT
(13)
/SLC
TIN
(13)
/AU
TO
FD
(13)
/OA
_RS
T(1
3)
(/A
SIC
_RS
T)
(4)
/RE
SE
T1
(1,4
)
CPU_SYNC (1)
/ST
B(1
3)
ARB_INT (1)B
AN
K1
(3)
BR
3010
kJx4
1 2 3 4
8 7 6 5
TP
405
TP327
TP
338
TP274
TP
385
R24
33J
R24
33J
TP281
TP
352
TP
356
R29
33J
R29
33J
TP
388
C48
47p
TP
429
TP
112
1
TP
308
R51
10kJ
R51
10kJ
R50
N.M
.
TP80
1
TP110
1
C680.1u
TP
346
TP
34
C640.1uu
TP
377
C600.1u
TP
367
TP
37
1
BR
290J
x41 2 3 4
8 7 6 5
TP
302
TP96
1
TP335
TP275
R33
33J
R33
33J
TP
65
1
TP
47
1
TP
447
TP79
1
TP
406
TP109
1
R38
10kJ
TP282
TP328
BR
5310
kJx4
1 2 3 4
8 7 6 5
TP
389
R41
33J
TP
116
1
TP4
TP276T
P43
0
TP
339
TP
410
BR
4810
kJx4
1 2 3 4
8 7 6 5
C340.1u
C590.1u
BR
61
33Jx
4
1 2 3 4
8 7 6 5
TP
368
TP
399
TP95
1
TP
353
BR
60
33Jx
4
1 2 3 4
8 7 6 5
TP
311
R30
33J
R30
33J
TP78
1
R31
33J
R31
33J
TP
5
TP
73
1
TP
42
1
TP294
TP
378
TP
70
1
TP108
1
TP
39
1
TP
347
TP
121
1
TP
423
TP
303
C660.1u
BR
63
33Jx
4
1 2 3 4
8 7 6 5
TP336
TP
448
TP
432
TP
56
1
TP
407
TP
392
TP283TP94
1
TP
442
R32
33J
R32
33J
TP
54
1
C310.1u
TP
390
TP
58
1
BR
3433
Jx4
1 2 3 4
8 7 6 5
R36
333
J
TP
411
BR
6610
kJx4
1234
8765
TP279
BR
6710
kJx4
1234
8765
TP297
TP107
1
TP277
TP
431
C73N.M. .M.
TP
369 TP
400
TP
451
BR
4782
Jx4
1 2 3 4
8 7 6 5
TP
76
1
BR
4510
kJx4
1 2 3 4
8 7 6 5
C52
47p
TP
354
C25
6N
.M.
C55
47p
TP
340
TP
312
TP
379
TP93
1
TP295
TP
52
1
TP
60
1
R25
410
kJ
R37
5N
.M.
TP
436
BR
4310
kJx4
1 2 3 4
8 7 6 5
C430.1u
TP
424
R48
N.M
.R
48N
.M.
TP285
TP106
1
TP337
TP
393
BR
3633
Jx4
1 2 3 4
8 7 6 5
TP
45
1
R49
10kJ
R49
10kJ
TP
433
TP
67
1
TP
449
TP
443
TP284
R34
10K
JR
3410
KJ
R53
33J
33J
TP
391
TP
36
TP92
1
TP
412
TP280
R40
9N
.M._
10K
J
TP
370
TP
401
C670.1u
TP105
1
TP
355
BR
2810
kJx4
BR
2810
kJx4
1234
8765
TP
313
TP
357
C290.1u
TP296
BR
5210
kJx4
1 2 3 4
8 7 6 5
C270.1u
TP
360
TP
62
1
X3
SG
8002
DC
(18.
3856
MH
z)
N.C
.1
VC
C8
OU
TP
UT
5
GN
D4
TP
50
1
TP91
1
TP
341
TP
437
R23
33J
R23
33J
TP
425
C460.1u
TP286
BR
6810
kJx4
1234
8765
TP
434
TP
394
R23
6N
.M.
R37
4N
.M.
TP
120
1
TP104
1
TP
444
X2
SG
8002
DC
(48.
0000
MH
z)
N.C
.1
VC
C8
OU
TP
UT
5
GN
D4
C320.1u
TP
316
TP
413
TP
402
TP3
TP292
C280.1u
TP90
1
C300.1u
TP
314
TP
358
TP103
1
C50
47p
TP
40
1
C54
47p
TP
38
1
TP271
TP
371
BR
3533
Jx4
1 2 3 4
8 7 6 5
TP
361
TP
426
L12
N.M
.
TP268
C23
112
0p
TP
72
1
TP
438
TP77
1
TP
124
1
BR
5110
kJx4
1 2 3 4
8 7 6 5
R40
433
J
TP
435
TP329
R25
510
kJ
TP
395
R52
10J
TP
445
BR
62
33Jx
4
1 2 3 4
8 7 6 5
TP
380
TP89
1
C58
N.M
.
TP
48
1
TP
317
TP
64
1
TP
342
C25
747
p
BR
2710
kJx4
BR
2710
kJx4
1234
8765
TP102
1
TP288
BR
4033
Jx4
1 2 3 4
8 7 6 5
TP
414
TP
69
1
TP
43
1
BR
4133
Jx4
1 2 3 4
8 7 6 5
C23222000p
TP293
TP290
TP
75
1
TP
415
R25
610
kJ
TP
359
TP
452
TP
315
C350.1u
C630.1u
TP88
1
TP
372
TP
362
TP272
C470.1u
C49
47p
TP101
1
TP
439
TP
427
TP269
TP
396
BR
3910
kJx4
1 2 3 4
8 7 6 5
BR
4210
kJx4
1 2 3 4
8 7 6 5
TP330
BR
7110
kJx4
1 2 3 4
8 7 6 5
TP
381
TP323
TP
318
TP
348
R40
7N
.M.
TP
115
1
BR
5410
kJx4
1 2 3 4
8 7 6 5
TP87
1
TP289
TP
119
1
R47
33J
TP
304
TP
309
L2
ZJS
R51
01-2
23
BR
3733
Jx4
1 2 3 4
8 7 6 5
TP
416
C51
47p
TP291
TP100
1
R27
33J
R27
33J
TP
446
R28
10K
JR
2810
KJ
+C
37
47u/
16V
+
TP
343
C420.1u
C380.1u
TP
373
TP
363
C650.1u
C71N.M. .M.
TP86
1
TP
440
C330.1u
TP
66
1
TP331
TP
46
1
TP
397
C450.1u
TP324
C610.1u
TP
57
1
IC4
HG
73C
141H
FV
AS
IC
CPU_DATA71
CPU_DATA62
CPU_DATA53
CPU_DATA44
CPU_DATA18
CPU_DATA36
CPU_DATA27
VCC(AC)5
CPU_DATA09
GND(AC)10
MIRCNT11
/CPUSYNC12
MEM_INT13
ARB_INT14
VCC(CORE)15
CPU_AD816
CPU_AD717
CPU_AD618
CPU_AD519
GND(CORE)20
RAM_CLK_IN21
CPU_AD422
CPU_AD323
CPU_AD224
CPU_AD125
CPU_AD026
/CPUCS27
SFCLK4828
GND(CORE)29
/CPUWR30
/CPURD31
/RESET32
PFCLK34
CLKSW35
GND(CORE)36
PFCLKOUT37
PFCLKIN38
GND(PLL)39
VCC(PLL)40
GND(PLL)41
VCC(PLL)42
TM2_15M43
/SYNC44
GND(AC)45
/VIDEO46
/LEND47
VCC(AC)48
OUTP00A49
OUTP02A51
OUTP03A52
OUTP04A53
OUTP05A54
OUTP06A55
VCC(CORE)57OUTP15A56
OUTP07A58
OUTP08A59
GND(CORE)60
OUTP09A61
OUTP10A62
OUTP11A63
OUTP12A64
VC
C(C
OR
E)
86
OU
TP
13B
84
OU
TP
12B
83
OU
TP
10B
81
GND(AC)69
OU
TP
09B
80
OU
TP
08B
79
OUTP03B72
GN
D(C
OR
E)
78
OU
TP
07B
77
OU
TP
06B
76
OUTP00B68OUTP14A67VCC(CORE)66OUTP13A65
VCC(AC)74OUTP04B73
OU
TP
11B
82
OUTP02B71
OU
TP
05B
75
OU
TP
14B
85
OUTP01B70
TS
P_M
OD
E96
OP
E_C
LK92
/TM
87T
M88
OP
E_D
AT
A89
OP
E_L
AT
CH
90G
ND
(AC
)91
VC
C(A
C)
93/S
CA
NS
P94
TS
O0
95
IE12
84_S
TB
97IE
1284
_AU
TO
FD
98V
CC
(CO
RE
)99
IE12
84_S
LCT
IN10
0IE
1284
_IN
IT10
1IE
1284
_SLC
T10
2G
ND
(CO
RE
)10
3IE
1284
_PE
104
IE12
84_B
US
Y10
5IE
1284
_AC
K10
6IE
1284
_FA
ULT
107
VC
C(C
OR
E)
108
IE12
84_R
EV
109
IE12
84_P
AR
AD
711
0IE
1284
_PA
RA
D6
111
IE12
84_P
AR
AD
511
2IE
1284
_PA
RA
D4
113
IE12
84_P
AR
AD
311
4IE
1284
_PA
RA
D2
115
VC
C(A
C)
116
IE12
84_P
AR
AD
111
7IE
1284
_PA
RA
D0
118
SU
SP
EN
D11
9G
ND
(AC
)12
0O
EN
121
VM
OU
T12
2V
PO
UT
123
GN
D(C
OR
E)
124
VM
IN12
5V
PIN
126
RC
V12
7/S
CA
NS
T12
8
VCC(CORE)192
/INREQ191
/OUTCS190
/OUTACK189
/ESPRD188
/FAXPRD187
/PCLPRD186
GND(AC)185
MDAT15184
MDAT14183
MDAT13182
VCC(CORE)181
MDAT12180
MDAT11179
MDAT10178
VCC(AC)177
MDAT09176
MDAT08175
MDAT07174
GND(CORE)173
MDAT06172
MDAT05171
MDAT04170
VCC(CORE)169
MDAT03168
MDAT02167
MDAT01166
MDAT00165
GND(AC)164
/INCS163
/INACK162
/OUTREQ161
GND(CORE)160
/HSYNC159
PIDATA0158
PIDATA1157
PIDATA2156
VCC(AC)155
PIDATA3154
PIDATA4153
PIDATA5152
PIDATA6151
PIDATA7150
/POCS149
/PO
RE
Q14
8
VC
C(A
C)
147
/PIW
T14
6
/PIA
CK
145
GN
D(A
C)
144
/PO
AC
K14
3
/PIR
EQ
142
GN
D(C
OR
E)
141
PO
DA
TA
014
0
PO
DA
TA
113
9
PO
DA
TA
213
8
PO
DA
TA
313
7
PO
DA
TA
413
6
PO
DA
TA
513
5
PO
DA
TA
613
4
PO
DA
TA
713
3
VC
C(C
OR
E)
132
/TR
AN
SS
T13
1
/RE
CE
PT
ST
130
/PR
INT
ST
129
RA
M_D
AT
A4
256
RA
M_D
AT
A5
255
RA
M_D
AT
A6
254
RA
M_D
AT
A7
253
GN
D(A
C)
252
RA
M_D
QM
025
1R
AM
_WD
E25
0V
CC
(AC
)24
9R
AM
_CA
S24
8R
AM
_RA
S24
7R
AM
_CS
246
RA
M_B
AN
KS
024
5R
AM
_BA
NK
S1
244
VC
C(C
OR
E)
243
RA
M_M
AD
1024
2R
AM
_MA
D0
241
RA
M_M
AD
124
0G
ND
(CO
RE
)23
9R
AM
_MA
D2
238
RA
M_M
AD
323
7G
ND
(AC
)23
6M
M_A
I223
5M
M_A
I123
4M
M_A
I023
3M
M_P
H_A
232
AFE_DB3217
MM
_BI2
231
MM
_BI1
230
MM
_Y2
225
VCC(AC)221
MM
_Y1
226
AFE_DB0220
AFE_DB1219
GN
D(C
OR
E)
223
AFE_DB2218
AFE_DB4216
AFE_DB5215
MM
_BI0
229
MM
_PH
_B22
8V
CC
(CO
RE
)22
7
MM
_Y3
224
CLPWM222
AFE_DB6214
AFE_DB7213
GND(AC)212
AFESCK211
VCC(CORE)210
ADCLK209
GND(CORE)208
AFE_SEN207
CCD_PH1206
CCD_PH2205
AFE_SDI204
CCD_CP203
BSAMP202
CCD_RS201
CCD_TG200
VSAMP199
GND(CORE)198
TD0197
TRSK195 TDI196
TCK193 TMS194
VCC(CORE)33
OUTP01A50
GN
D(C
OR
E)
257
RA
M_D
AT
A3
258
RA
M_D
AT
A2
259
RA
M_D
AT
A1
260
RA
M_D
AT
A0
261
GN
D(A
C)
262
RA
M_D
AT
A15
263
RA
M_D
AT
A14
264
VC
C(C
OR
E)
265
RA
M_D
AT
A13
266
RA
M_D
AT
A12
267
RA
M_D
AT
A11
268
RA
M_D
AT
A10
269
RA
M_D
AT
A9
270
RA
M_D
AT
A8
271
VC
C(C
OR
E)
272
RA
M_D
QM
127
3
RA
M_C
KE
274
GN
D(A
C)
275
RA
M_C
LK_O
UT
276
GN
D(C
OR
E)
277
RA
M_M
AD
1227
8
RA
M_M
AD
1127
9
RA
M_M
AD
928
0
VC
C(C
OR
E)
281
RA
M_M
AD
828
2
RA
M_M
AD
728
3
VC
C(A
C)
284
RA
M_M
AD
628
5
RA
M_M
AD
528
6
RA
M_M
AD
428
7
GN
D(A
C)
288
CP
UD
AT
A15
289
CP
UD
AT
A14
290
CP
UD
AT
A13
291
CP
UD
AT
A12
292
CP
UD
AT
A11
293
CP
UD
AT
A10
294
CP
UD
AT
A9
295
CP
UD
AT
A8
296
TP
382
TP
55
1
TP99
1
TP
319
TP
349
TP
123
1
R26
33J
R26
33J
TP
310
BR
7010
kJx4
1 2 3 4
8 7 6 5
C26
410
00p
R35
33J
R35
33J
C74
N.M
.
TP
305
R40
333
J
R25
310
kJ
TP
59
1
BR
4433
Jx4
1 2 3 4
8 7 6 5TP85
1
TP
417
TP
53
1
TP
420
BR
4610
kJx4
1 2 3 4
8 7 6 5
TP287
R42
33J
TP98
1
TP
364
TP
374
TP
320
TP
441
R25
33J
R25
33J
TP
408
R45
N.M
.R
45N
.M.
TP
398
L10
0J (
1608
)
TP332
TP
344
TP
383
TP84
1
TP
403
TP325
BR
310J
x41 2 3 4
8 7 6 5
TP
71
1
C360.1u
TP
350
TP
41
1
TP
61
1
TP
51
1
TP97
1
TP
386
TP
306
TP
418
R39 10
kJ
TP
421
TP
450
C53
N.M
.
BR
5033
Jx4
1 2 3 4
8 7 6 5
TP
114
1
TP
298
R36
10kJ
BR
3210
kJx4
1 2 3 4
8 7 6 5
TP83
1
TP
74
1
BR
6910
kJx4
1234
8765
TP
118
1
R44
10kJ
TP278
C390.1u
C72N.M. .M.
TP
375
TP
321
BR
3310
kJx4
1 2 3 4
8 7 6 5
TP
365
R40
633
J
C79 47
p
C7522000p
TP
409
TP
113
1
BR
4933
Jx4
1 2 3 4
8 7 6 5
TP333
TP
117
1
R37
10kJ
C70N.M. .M.
TP
300
R40
33J
TP
404
TP326
TP273
TP
384
TP
351
TP
44
1
TP
68
1
TP82
1
TP
387
TP
345
C400.1u
R40
8N
.M.
C440.1u
TP
35
TP
428
TP
307
L13
0J (
1608
)
TP
49
1
TP
419
TP
63
1
TP
422
TP
299
TP
299
C690.1u
C410.1u
C77
82p
TP
122
1
C2300.1u
R43
33J
C76
0.1u
C56
N.M
.
TP
376
TP
322
TP
366
C57
47p
TP81
1
TP111
1
TP
301
TP334
C620.1u
5 5
4 4
3 3
2 2
1 1
DD
CC
BB
AA
MC
U P
WB
(G
rap
hic
_AS
IC s
ecti
on
) (A
L-2
030/
2040
CS
)2/
13
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 2
D6
/HW
R
RA
MD
B14
D7
A17
A4
RA
MD
B5
A8
MA
D9
/HW
R
MA
D1
A5
A2
A7
A14
MA
D6
D0
D2
D8
RA
MD
B9
RA
MD
B13
A15
A3
A2
RA
MD
B3
D15
MA
D8
VP
P
MA
D12
A8
A11
D13
D11
A15
VP
P
D3
D10
D14
A13
A19A13
RA
MD
B12
D10
RA
MD
B8
MA
D2
D14
RA
MD
B4
MA
D7
D15
MA
D11
A10
D9
A16
A18
D11
A12
MA
D3
A1
RA
MD
B11
D5
A16
RA
MD
B7
A1
A14
MA
D10
RA
MD
B2
D9
MA
D5
D8
RA
MD
B10
A7
A5
RA
MD
B0
A3
A9
D1
A1
A6
D12
RA
MD
B15
A10
A9
MA
D0
/RD
RA
MD
B6
A6
D4
MA
D4
RA
MD
B1
A12
A0
A4
A11
A17
D13
D12
A20
/RD
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
VC
C3
D[1
5..0
](1
,2)
RA
MD
B[1
5..0
](2
)
/CS
1(1
)
/CS
0(1
)
RY
/BY
(1)
/SD
CS
(2)/S
DR
AS
(2)
/RE
SE
T0
(1,2
,4)
MA
D[1
2..0
](2
)
/RD
(1,2
)
/SD
WD
E(2
)D
QM
0(2
)
BA
NK
0(2
)
SD
CLK
(2)
/HW
R(1
)
/SD
CA
S(2
)D
QM
1(2
)
SD
CK
E(2
)
BA
NK
1(2
)
A[2
0..0
](1
,2)
SC
L(1
)S
DA
(1)
Ser
ial E
E-P
RO
M
Fla
shR
OM
VP
P C
on
tro
ll
SD
RA
M
FL
AS
H R
OM
SR
AM
TP
453
C233N.M.
C234N.M.
C89
0.1u
IC7
Fla
sh R
OM
A0
25A
124
A2
23A
322
A4
21A
520
A6
19A
718
A8
8A
97
A10
6A
115
A12
4A
133
A14
2A
151
A16
48
A17
17
DQ
029
DQ
131
DQ
233
DQ
335
DQ
438
DQ
540
DQ
642
DQ
744
DQ
830
DQ
932
DQ
1034
DQ
1136
DQ
1239
DQ
1341
DQ
1443
DQ
1545
A19
9
NC
10
A18
16
GN
D46
GN
D27
VC
C37
VP
P13
BY
TE
47
OE
28
CE
26
WE
11
RP
12
WP
14
RY
/BY
15
R56
10kJ
R65N.M.T
P45
4
C90
0.1u
C91
0.1u
TP
458
C92
0.1u
C93
0.1u
TP
455
C81
0.1u
C84
0.1u
R64N.M.
C94
0.1u
R69
0J
R68
0J0J
R6310kJ
TP
456
C86N.M.
C236N.M.
C88
0.1u
R59
N.M
.
C235N.M.
IC5
24C
02/2
4WC
04/2
4WC
08
E0
1
E1
2
E2
3
VS
S4
SD
A5
SC
L6
WC
7V
CC
8
C82
N.M
.
C850.1u .1u
IC6
SD
RA
M (
16bi
t x 4
bank
)
A0
23
A1
24
A2
25
A3
26A
429
A5
30A
631
A7
32A
833
A9
34
A10
22
BA
020
DQ
02
DQ
14
DQ
25
DQ
37
DQ
48
DQ
510
DQ
611
DQ
713
DQ
842
DQ
944
DQ
1045
DQ
1147
DQ
1248
DQ
1350
DQ
1451
DQ
1553
VC
C1
VC
C27
VS
S54
VS
S28
VC
CQ
9
VS
S41
VC
CQ
43
VC
CQ
49V
SS
Q6
VS
SQ
12
VS
SQ
46
VS
SQ
52
LDQ
M15
UD
QM
39W
E16
CA
S17
RA
S18
CS
19C
LKE
37C
LK38
NC
40
NC
36
VC
CQ
3
VC
C14
BA
121
A11
35
R66
10kJ
R67
0J
J1,J
2
1 2 3
IC8
IS63
LV10
24L-
12J-
TR
IC8
I/O0
6A
01
I/O1
7A
12
I/O2
10A
23
I/O3
11A
34
I/O4
22A
413
I/O5
23A
514
I/O6
26A
615
I/O7
27A
716
A8
17
A9
18
A10
19
A11
20
A12
21
A13
29
A14
30
CS
15
OE
28
WE
12
VD
D8
GN
D9
VD
D24
A15
31
A16
32
GN
D25
R58
1kJ
TP
457
C83
0.1u
R62N.M. .M.
C87
0.1u
R70N.M.
5 5
4 4
3 3
2 2
1 1
DD
CC
BB
AA
MC
U P
WB
(M
emo
ry s
ecti
on
) (A
L-2
030/
2040
CS
)3/
13
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 3
/RE
SE
T#
VS
AM
P#
CC
D_T
G#
CC
D_R
S#
BS
AM
P#
CC
D_C
P#
CC
D_P
HI2
#C
CD
_PH
I1#
AD
CLK
#
PR
OT
EC
T
/RE
SE
T#
AF
E_S
DI#
AF
E_S
DI
AF
E_S
DI#
AF
E_S
DI
AF
E_D
B#0
AF
E_D
B#3
AF
E_D
B#2
AF
E_D
B#1
AF
E_D
B#7
AF
E_D
B#5
AF
E_D
B#4
AF
E_D
B#6 AF
E_D
B#0
AF
E_D
B#3
AF
E_D
B#2
AF
E_D
B#1
AF
E_D
B#7
AF
E_D
B#5
AF
E_D
B#4
AF
E_D
B#6
AF
E_D
B3
AF
E_D
B7
AF
E_D
B5
AF
E_D
B4
AF
E_D
B6
AF
E_D
B2
AF
E_D
B0
AF
E_D
B5
AF
E_D
B2
AF
E_D
B1
AF
E_D
B4
AF
E_D
B7
AF
E_D
B6
AF
E_D
B1
AF
E_D
B0
AF
E_D
B3
VS
AM
P#
BS
AM
P#
AD
CLK
#
CC
D_P
HI1
#
CC
D_P
HI2
#
CC
D_C
P#
CC
D_R
S#
CC
D_T
G#
VC
C3
5V
5V
5V
5V 5V 5V
VC
C3
5V
VC
C3
VC
C3
VC
C3
VC
C3
5V
5V
VC
C3
VC
C3
VC
C3
VC
C3
SE
LIN
3(1
)
(CE
D1)
(7)
SIN
2
OP
_LA
TC
H(2
)
KE
YIN
1(8
)
(PD
1)(7
)
(OP
_CLK
)(8
)
(SP
ID)
(7)
OP
_DA
TA
(2)
(FW
)(1
)
TM
_(2
)
(DR
ST
)(7
)
(TM
_)(6
)(T
M)
(6)
(PM
RD
Y)
(7)
/SY
NC
(9)
(CE
D2)
(7)
(OP
_LA
TC
H)
(8)
SE
LIN
2(1
)
(PO
D)
(7)
(PP
D3)
(7)
(PP
D2)
(7)
(TC
S)
(7)
(OP
_DA
TA
)(8
)
(SE
LIN
3)(8
)
(SE
LIN
1)(8
)
/VID
EO
(9)
SIN
1
SE
LIN
1(1
)
(PD
2)(7
)
DS
WS
(7)
/RE
SE
T1
(1,2
)
SIN
1S
IN2
OP
_CLK
(2)
SIN
3
(MF
D)
(7)
TH
OP
EN
(5)
(PP
D1)
(7)
(SE
LIN
2)(8
)
TM
(2)
VID
EO
#(2
)
(MM
LD)
(7)
SIN
3
DV
S1
(7)
FW
(8)
US
B_I
N(1
1)
KE
YIN
2(8
)(K
EY
IN1)
(1)
(KE
YIN
2)(1
)/R
ES
ET
0(1
,2,3
)
MIR
ON
(2)
SP
FM
T2/
MIR
CN
T(1
)(S
PF
MT
1)(6
)(S
PF
MT
0)(6
)
SP
FO
N(2
)
MIR
CN
T(2
)
(SP
FM
T2)
(6)
SP
FM
T0
(1)
(SP
FM
T3)
(6)
SP
FM
T3
(1)
SP
FM
T1
(1)
(/S
YN
C)
(2)(S
ELI
N2)
(8)
(SE
LIN
1)(8
)
(SE
LIN
3)(8
)
(US
B_I
N)
(1)
(SIN
1)(1
)
(SIN
3)(1
)(S
IN2)
(1)
D_C
ON
T(1
)(D
_CO
NT
)(1
1)
(FA
NLK
)(7
)
/AS
IC_R
ST
(1,2
,12)
(/A
SIC
_RS
T)
(2)
ST
RO
BE
(1)
(ST
RO
BE
)(8
)
mt_
at_h
ome
(10)
mt_
at_h
ome#
(1)
CC
D_C
P#
(10)
CC
D_T
G#
(10)
VS
AM
P#
(10)
CC
D_P
HI1
#(1
0)
AF
E_S
CK
#(1
0)
CC
D_P
HI2
#(1
0)
BS
AM
P#
(10)
CC
D_R
S#
(10)
AD
CLK
#(1
0)
AF
E_S
DI#
(10)
VS
AM
P(2
)C
CD
_TG
(1,2
)C
CD
_RS
(2)
BS
AM
P(2
)C
CD
_CP
(2) C
CD
_PH
I2(2
)C
CD
_PH
I1(2
)A
DC
LK(2
)
AF
E_S
DI
(2)
AF
E_S
EN
(2)
AF
E_S
CK
(2)
AF
E_S
EN
#(1
0)
AF
E_D
B#[
7..0
](1
0)A
FE
_DB
[7..0
](2
)
5V/3
.3V
3.3V
5V
3.3V
Dig
ital
Inp
ut
Mu
ltip
rexe
r
5V3.
3V
3.3V
3.3V
5V/3
.3V
3.3V
5V/3
.3V
3.3V
3.3V
3.3V
5V3.
3V
TP
472
R91
33J
BR
64
0Jx4
1 2 3 4
8 7 6 5
R12810kJ
TP
539
TP
498
C13
233
p
R88
33J
TP
523
R95
100J
R42
210
0J
TP
270
TP
270
C10
3
0.1u
TP
480
TP
492
C10
9
47p
R73
33J
33J
IC15
74V
HC
T24
4
1A1
2
1A2
4
1A3
6
1A4
8
2A1
11
2A2
13
2A3
15
2A4
17
1G1
2G19
1Y1
18
1Y2
16
1Y3
14
1Y4
12
2Y1
9
2Y2
7
2Y3
5
2Y4
3
VC
C20
GN
D10
BR
55
33Jx
4
BR
55
1234
8765
IC14
74LC
X24
4
1A1
2
1A2
4
1A3
6
1A4
8
2A1
11
2A2
13
2A3
15
2A4
17
1G1
2G19
1Y1
18
1Y2
16
1Y3
14
1Y4
12
2Y1
9
2Y2
7
2Y3
5
2Y4
3
VC
C20
GN
D10
IC13
74H
C15
1
D0
4
D1
3
D2
2
D3
1
D4
15
D5
14
D6
13
D7
12
A11
B10
C9
G7
W6
Y5
VC
C16
GN
D8
R86
10J
TP
473
R15
0JT
P46
3
C99
0.1u
C96
0.1u
TP
540
TP
499
TP
524
R10
033
J
R90
33J
C13
382
p
C10
4
33p
TP
503
R87
33J
TP
500
R74
10J
R80
10J
TP
533
IC45
NC
7ST
08M
5X
1 2 3
4
5
R81 10kJ1
C80
0.1u
TP
474
C10
0
33p
TP
507
R46
56J
TP
464
R13
00J
TP
541
TP
510
TP
496
TP
525
TP
11
TP
527
C97
33p
TP
513
IC9
74LC
X24
4
1A1
2
1A2
4
1A3
6
1A4
8
2A1
11
2A2
13
2A3
15
2A4
17
1G1
2G19
1Y1
18
1Y2
16
1Y3
14
1Y4
12
2Y1
9
2Y2
7
2Y3
5
2Y4
3
VC
C20
GN
D10
TP
493
TP
501
TP
482
R79
33J
R85
10kJ
TP
508
TP
475
TP
18
R20
50N
.M.
C10
882
p
R78
100J
TP
465
C10
2
N.M
.
TP
511
TP
526
TP
487
R54
56J
TP
528
R13
3op
en
TP
514
IC16
NC
7ST
08M
5X
1 2 3
4
5
TP
494
TP
483
R10
133
J
TP
497
TP
19
TP
509
TP
476TP
466
C12
482
p
TP
488
TP
529
TP
515
C26
3
0.1u
R55
100J
IC11
74LC
X24
4
IC11
1A1
2
1A2
4
1A3
6
1A4
8
2A1
11
2A2
13
2A3
15
2A4
17
1G1
2G19
1Y1
18
1Y2
16
1Y3
14
1Y4
12
2Y1
9
2Y2
7
2Y3
5
2Y4
3
VC
C20
GN
D10
TP
484
TP
495
IC12
74H
C15
1
D0
4
D1
3
D2
2
D3
1
D4
15
D5
14
D6
13
D7
12
A11
B10
C9
G7
W6
Y5
VC
C16
GN
D8
TP
467
TP
12
TP
534
TP
489
TP
505
TP
530
TP
516R
7633
J
C12
582
p
TP
485
TP
17T
P17
R57
56J
TP
468
C95
0.1u
TP
535
TP
531
R92
33J
TP
517
R83
47J
TP
544
C25
5
N.M
.
TP
486
C25
8
0.1u
(N.M
.)
R75
33J
C12
6N
.M.
R77
1kJ
IC10
74H
C15
1
D0
4
D1
3
D2
2
D3
1
D4
15
D5
14
D6
13
D7
12
A11
B10
C9
G7
W6
Y5
VC
C16
GN
D8
IC18
NC
7WZ
17
A1
1
A2
3
Y1
6
Y2
4
GN
D2
Vcc
5
R60
56J
C98
0.1u
C22
1
0.1u
BR
65 0Jx4
1234
8765
TP
469
TP
536
TP
520
TP
518
R98
N.M
.
TP
542
C10
1
0.01
uF
IC43
74LC
X24
4
1A1
2
1A2
4
1A3
6
1A4
8
2A1
11
2A2
13
2A3
15
2A4
17
1G1
2G19
1Y1
18
1Y2
16
1Y3
14
1Y4
12
2Y1
9
2Y2
7
2Y3
5
2Y4
3
VC
C20
GN
D10
C11
0
0.1u
C11
0
0.1u
C12
9N
.M.
C10
6
0.1u
IC35
NC
7WZ
17
A1
1
A2
3
Y1
6
Y2
4
GN
D2
Vcc
5
TP
502
TP
470
R61
100J C
262
0.1u
C10
50.
1u
TP
537
TP
521
TP
543
C10
7
0.1u
TP
519
R9610kJ
R71
33J
33J
R99
10kJ
TP
490
TP
477
TP
506
R9710kJ
C13
082
p
TP
471
R20
3010
kJ
R89
33J
R93
33J
R82
100J
TP
538
R94
33J
TP
522
R72
33J
33J
IC44
74LC
X24
4(op
en)
IC44
74LC
X24
4(op
en)
1A1
2
1A2
4
1A3
6
1A4
8
2A1
11
2A2
13
2A3
15
2A4
17
1G1
2G19
1Y1
18
1Y2
16
1Y3
14
1Y4
12
2Y1
9
2Y2
7
2Y3
5
2Y4
3
VC
C20
GN
D10
TP
491
TP
478
5 5
4 4
3 3
2 2
1 1
DD
CC
BB
AA
MC
U P
WB
(D
rive
r se
ctio
n 1
) (A
L-2
030/
2040
CS
)4/
13
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 4
/PR
PR
#
PR
#
VC
C3
VC
C3
24V
VC
C3
VC
C3
5V
12V
PG
ND
INT
5V
12V
PG
ND
VC
C3
12V
12V
12V
5V
24V
12V
5VV
CC
3
24V
12V
PG
ND
24V
PG
ND
5VV
CC
3
5V
VC
C3
VC
C3
12V
VC
C3
12V
12V
INT
24V
PG
ND
MM
ref0
(6)
/MC
(8)
/MP
FS
(9)
/GR
IDL
(8)
HL
(2)
LDE
N(2
)
MM
ref2
(6)
GR
IDL
(2)
MP
FS
(2)
BIA
S(2
)
CP
FS
1(2
)
MM
_Y2
(2)
VF
M_2
4V(2
)
/CP
FS
1(9
)
MM
_Y1
(2)
VF
MC
NT
_12V
(2)
PM
CLK
(1)
/TC
(8)
TC
(2)
MR
PS
2(2
)
RT
H(1
)
PR
(2)
MR
PS
_3(6
)
RT
H_I
N(9
)
/VF
MC
NT
(9)
/PM
D(9
)
MM
ref1
(6)
MR
PS
_2(6
)
PM
CLK
_A(9
)
FT
H
/RR
S(9
)
/BIA
S(8
)
SH
OLD
(9)
/MM
D(9
)
FT
H
VF
MO
UT
(9)
MM
_Y3
(2)M
RP
S1
(2)
/PO
FF
(8)
HLO
UT
(8)
TH
OP
EN
(4)
/LD
EN
(9)
CP
FS
2(2
)
MR
PS
_1(6
)
/LE
ND
(2)
MC
(2)
MM
D(2
)
/CP
FS
2(9
)
PM
D(2
)
MR
PS
3(2
)
TC
S_A
N(1
2)(T
CS
_AN
)(1
)
MC
NT
(1)
/MC
NT
(9)
/MM
CLK
(9)
MM
CLK
(1)
PO
FF
(1,2
)
RR
S(2
)
PT
PU
LSE
(2)
/PR
(8)
An
alo
g T
on
ner
Sen
sor
Bu
ffer
+ -
IC17
AK
IA39
3F
+ -
3 21
8 4
TP
21
R19
5
100J
TP
604
TP
612
TP
264
TP
547
Q18
KR
C10
2S
1
2
3
TP
559
R36
50J
TP
26
R38
847
kJ
R41
3N
.M._
10kJ
TP
479
R38
947
kJ
C13
4
1uF
/16V
IC19
KID
6500
1AF
1B1
2B2
3B3
4B4
5B5
6B6
7B7
E8
CO
M9
1C16
2C15
3C14
4C13
5C12
6C11
7C10
BR
7210
kJx4
1234
8765
TP
548
TP
560
TP
27
Q21
KR
C10
2S
1
2
3
TP
562
D2
KD
S22
6(op
en)
213
R11
710
kJR
117
10kJ
Q20
KR
A11
9S
1
2
3
D55
CR
H01
Q13
2SB
1132
B
E C
TP
549
TP
22
IC25
KID
6550
3F
1B1
2B2
3B3
4B4
5B5
6B6
7B7
G8
NC
9
1C16
2C15
3C14
4C13
5C12
6C11
7C10
TP
28
TP
561
+ -
IC20
BK
IA39
3F
+ -
5 67
8 4
R37
01.
5kJ
TP
617
R12
9N
.M.
R10
47.
5kF
R10
47.
5kF
Q2
N.M
._K
TA
1505
S
TP
555
R19
610
kJ
Q16
KR
C10
2S
1
2
3
R15
547
0kJ
TP
554
C16
02.
2uF
/10V
R36
4
0J
D49
MT
Z J
22B
R11
21.
2kF
CP
16
0603
FA
1.5A
/060
3SF
F15
0FM
R19
14.
7kJ
R10
74.
3kF
R10
74.
3kF
R10
9
N.M
._4.
7kJ
1/4
W
R14
61.
5kF
TP
265
R11
410
kF
D34
1SS
355
TP
618
R10
8
N.M
._47
kJ
TP
605
R19
310
kJ
IC24
KID
6550
3F
1B1
2B2
3B3
4B4
5B5
6B6
7B7
G8
NC
9
1C16
2C15
3C14
4C13
5C12
6C11
7C10
TP
551
TP
551
R38
0N
.M._
1.5k
J
TP
556
D35
1SS
355
D57
RLS
-73
D57
R38
6
4.7k
J 1/
4W
R14
447
kJ
R11
310
kJ
D1
MA
700
D1
R36
6N
.M.
R11
610
kJ
TP
619
TP
606
+ -
IC17
B
KIA
393F
+ -
5 67
8 4
C11
5
2200
0p
R10
31M
F
R11
030
0J
+ -
IC22
BK
IA35
8F
+ -
5 67
8 4
TP
557
Q17
KR
C10
2S
1
2
3
Q12
2SB
1132
B
E C
(G)
(D)
(S)
Q11
2SK
3018
(ope
n)(G)
(D)
(S)
R10
21k
F
R40
50J
R11
110
0J
D33
1SS
355
R36
7
10kJ
TP
620
D3
KD
S22
6
213
R41
4N
.M._
10kJ
C11
3
0.1u
C23
7
N.M
.
(G)
(D)
(S)
Q19
2SK
3018
(G)
(D)
(S)
TP
607
R13
810
kJC
162
0.1u
TP
558
R41
9N
.M._
10kJ
R10
610
kF
C11
222
000p
BR
561.
5kJx
41 2 3 4
8 7 6 5
R15
310
0J
R37
9N
.M._
1.5k
J
TP
624
TP
624
IC21
KID
6500
1AF
1B1
2B2
3B3
4B4
5B5
6B6
7B7
E8
CO
M9
1C16
2C15
3C14
4C13
5C12
6C11
7C10
D58
RLS
-73
R14
210
kJ(o
pen)
TP
608
TP
29
TP
266
R84
10kJ
BR
571.
5kJx
41 2 3 4
8 7 6 5
TP
621
TP
613
TP
613
C11
1
0.1u
/50V
+ -
IC22
AK
IA35
8F
+ -
3 21
8 4
D56
CR
H01D
56
CP
17
0603
FA
1.5A
/060
3SF
F15
0FM
TP
609
C11
4
0.1u
/50V
+ -
IC20
AK
IA39
3F
+ -
3 21
8 4
TP
610
TP
545
D46
KD
S22
6(op
en)
213T
P62
2
D4
1SS
355
TP
614
D5
1SS
355
D47
KD
S22
6(op
en)
213
Q14
KR
C10
2S
1
2
3
Q3
KR
A11
9S
1
2
3
R38
7
4.7k
J 1/
4W
TP
603
R41
8N
.M._
10kJ
TP
611
R10
51k
J
R19
210
kJ
TP
546
TP
623
Q4
KR
C10
2S
1
2
3
TP
23
TP
615
R11
510
0J 1
/4W
R19
4
100J
5 5
4 4
3 3
2 2
1 1
DD
CC
BB
AA
MC
U P
WB
(D
rive
r se
ctio
n 2
) (A
L-2
030/
2040
CS
)5/
13
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 5
PG
ND
PG
ND
5V
24V
SP
FM
T
24V
Dup
MT
PG
ND
PG
ND
24V
PG
ND
PG
ND
24V
SC
MT
PG
ND
PG
ND
PG
ND
PG
ND
24V
SC
MT
PG
ND
5V
24V
Dup
MT
5V
5V
PG
ND
PG
ND
5V
PG
ND
24V
SP
FM
T
24V
OU
T_A
-(9
)
TM
B_O
(9)
(SP
FM
T1)
(4)
SP
MT
_3(9
)
MM
ref2
(5)O
UT
_B+
(9)
(TM
)(4
)
(SP
FM
T3)
(4)
TM
A_O
(9)
MM
_BI0
(2)
MM
_AI0
(2)
(SP
FM
T0)
(4)
MM
_PH
_A(2
)M
M_A
I1(2
)
/DM
T3
(9)
OU
T_B
-(9
)
(SP
FM
T2)
(4)
(TM
_)(4
)
OU
T_A
+(9
)
SP
MT
_2(9
)
MM
ref1
(5)
DM
T1
(1)
DM
T0
(1)
/DM
T2
(9)
DM
T2
(1)
MM
ref0
(5)
MM
_PH
_B(2
)
SP
MT
_1(9
)
/DM
T1
(9)
DM
T3
(1)
/DM
T0
(9)
MM
_BI1
(2)
MR
PS
_3(5
)M
RP
S_2
(5)
MR
PS
_1(5
)
SP
MT
_0(9
)
Sca
nn
er M
oto
r D
rive
r
SP
F M
oto
r D
rive
r
Du
ple
x M
oto
r D
riv
er
To
nn
er
Mo
tor
Dri
ve
r
Fo
r A
L20
40 M
od
el O
nly
R13
562
0JJ
TP
597
TP
595
C12
8
0.1u
/50V V
R13
61.
2kJ
R12
01.
5kJ
R13
710
0JJ
R11
8
0.68
J 1W
TP
586
TP
596
R13
11.
2kJ
C11
682
0pp
C22
2
0.1u
R12
11.
5kJ
R12
330
kJ
C12
10.
1uC
121
0.1u
R11
9
0.68
J 1W
C11
882
0pp
R12
21k
JR
122
1kJ
IC26
TD
6206
4AF
IC26
TD
6206
4AF
I13
NC
4
NC
5
I26
NC
10
I311
NC
12
NC
13
GN
D17
O1
2
O2
7
O3
9
O4
16
CO
M1
CO
M8
GN
D18
I414
NC
15
R12
430
kJ
C11
782
0pp
C11
982
0p
BR
59
10kJ
x4
1234
8765
+C
122
47u/
35V
+
IC29
TA
7291
AS
Vcc
2
IN1
9
IN2
1
GN
D5
OU
T2
3
OU
T1
7
Vre
f8
Vs
6
N.C
4
D6
MT
Z J
22B
D6
MT
Z J
22B
R12
751
0JJ
C13
1
0.1u
R13
21J
2W
R12
61k
JC
120
0.1u
R12
52k
J
C12
30.
1u/5
0VV
IC28
ST
A71
00M MO
UT
A1
OU
T A
2
OU
T A
/3
OU
T A
/4
Vs
13
OU
T B
17
OU
T B
18
OU
T B
/15
OU
T B
/16
GN
D10
IN A
8
IN A
/7
IN B
11
IN B
/12
RE
F9
Sen
se A
5
Sen
se B
14
Syn
c6
+C
127
10u/
35V
+
TP
593
CP
106
03F
A1.
5A/0
603S
FF
150F
M
IC27
L621
9DS
OU
T 2
A2
SE
NS
E 2
3
CO
MP
24
OU
T 2
B5
GN
D6
GN
D7
I02
8
I12
9
PH
AS
E 2
10
VR
EF
211
RC
212
VS
S13
RC
114
VR
EF
115
PH
AS
E 1
16I1
117
GN
D18
GN
D19
I01
20O
UT
1B
21C
OM
P 1
22S
EN
SE
123
VS
24O
UT
1A
1
TP
587
R24
44.
7kJ
TP
590
R13
430
0JJ
R14
11J
2W
TP
588
TP
591
TP
589
CP
206
03F
A1.
5A/0
603S
FF
150F
M
TP
592
TP
594
CP
306
03F
A1.
5A/0
603S
FF
150F
M
5 5
4 4
3 3
2 2
1 1
DD
CC
BB
AA
MC
U P
WB
(D
rive
r se
ctio
n 3
) (A
L-2
030/
2040
CS
)6/
13
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 6
VC
C3
5V
INT
5V
PG
ND
VC
C3
EN
5V
VC
C3
5V
PG
ND
12V
5V
24V
VC
C3
INT
24V
INT
24V
5V 5V5V5V
PG
ND
5V
VC
C3
(PD
2)(4
)
DV
SE
L(1
2)
(DR
ST
)(4
)D
RS
T(8
)
PD
2(9
)
(PP
D3)
(4)
(CE
D1)
(4)
(TC
S)
(4)
(MM
LD)
(4)
PP
D1
(9)
(PP
D1)
(4)
TC
S(1
2)
PS
W(8
)
(CE
D2)
(4)
CE
D1
(9)
(SP
PD
)(1
)
CE
D2
(9)
PP
D3
(9)
(PP
D2)
(4)
(PM
RD
Y)
(4)
(PO
D)
(4)
12V
IN(8
)
DV
S1
(4)
PM
RD
Y(9
)
SP
PD
(9)
MF
D(9
)(M
FD
)(4
)
PO
D(9
)
PD
1(9
)(P
D1)
(4)
PP
D2
(9)
SP
ID(9
)
3.3V
IN(8
)
(PS
W)
(1)
MM
LD(9
)
(SP
ID)
(4)
DS
WS
(4)
24V
1(D
SW
S)
(9)
(FA
NLK
)(4
)F
AN
LK(9
)
R16
01k
J
L15
N.M
.
R16
615
kJ
R14
3
0.22
J 2W
R39
810
0kJ
R17
812
kJ
C17
9
0.1u
R37
710
kJ
C15
3
0.1u
R16
710
kJ
D14
KD
S22
6
213
R17
93.
3kJ
C22
4
1000
p
C17
1
1000
p
R37
81k
J
C15
4
0.1u
D15
KD
S22
6(op
en)
213
R14
74.
7kJ
R14
74.
7kJ
R17
57.
5kJ
C16
4
1000
p
C17
2
1000
p
D16
KD
S22
6(op
en)
213
R17
67.
5kJ
C15
5
0.1u
C16
8
0.1u
R15
21k
J 2W
C17
3
1000
p
R39
910
0kJ
C18
6
1000
p
C22
3
1000
p
R17
210
0J 2
W
C13
5
0.1u
C15
6
0.1u
C18
9
1000
p
C22
6
1000
p
R18
01k
J
C19
0
1000
p
D18
KD
S22
6
213
TP
151
D52
ZENER_UDZS4.7B(open)
C15
7
0.1u
R18
11k
J
+C
181
22u/
16V
+
R39
410
0kJ
C13
6
N.M
.
C18
7
1000
p
D20
1SS
355
D19
KD
S22
6(op
en)
213
D10
KD
S22
6(op
en)
213
C16
3
1000
p
IC30
KIA
7805
IN1
GN
D
2OU
T3
C18
3
0.1u
R18
21k
J
C15
8
0.1u
C18
8
1000
p
D21
KD
S22
6
213
D17
KD
S22
6(op
en)
213
D9
KD
S22
6(op
en)
213
R24
210
J
C18
4
0.1u
R18
31k
J
D13
KD
S22
6
213
D22
KD
S22
6(op
en)
213
C15
9
N.M
.
C13
7
0.1u
R14
910
kJR
149
10kJ
R14
515
kJR
145
15kJ
C17
6
0.1u
+C
182
22u/
16V
+
R24
010
J
R18
41k
J
C14
6
N.M
.
D51
ZENER_UDZS4.7B(open)
R16
81k
J
+C
175
47u/
35V
+
C16
1
1000
p
C18
0
0.1u
R18
51k
J
C14
7
N.M
.
R16
91k
J
C13
8
0.1u
C16
7
1000
p
L5 ZJS
R51
01-2
23
R18
61k
J
R14
810
kJR
148
10kJ
L14
0J (
1608
)
R17
01k
J
+C
178
22u/
16V
+
R17
77.
5kJ
C14
8
N.M
.
D12 1S
S35
5
C14
0
N.M
.
C13
9
N.M
.
R17
11k
J
TP
161
D11
1SS
355
C14
9
0.1u
C24
8
1000
p
C24
8
1000
p
C14
1
N.M
.
C22
5
1000
p
TP
585
C18
5
1000
p
C15
0
0.1u
C14
2
N.M
.
D27
KD
S22
6(op
en)
213
R15
91k
J
R17
315
kJ
R15
41k
J
C16
6
1000
p
D28
KD
S22
6(op
en)
213
C14
3
N.M
.
D25
KD
S22
6(op
en)
213
+C
169
47u/
35V
+
R39
6
100k
J
+C
177
47u/
25V
+
R24
110
J
D23
KD
S22
6(op
en)
213
C14
4
N.M
.
R15
110
kJR
151
10kJ
C17
0
0.1u
/50V
R15
61k
J
TP
131
D26
KD
S22
6
213
L4 ZJS
R51
01-2
23(o
pen)
D50
KD
S22
6(op
en)
213
C14
5
N.M
.
D29
KD
S22
6(op
en)
213
R16
32.
7kJ
R15
71k
J
D24
KD
S22
6(op
en)
213
R39
710
0kJ
C15
1
0.1u
R16
410
kJ
R16
120
kJC
165
1000
p
TP
141
R24
310
J
R15
81k
J
R16
510
kJ
R16
220
kJ
R15
015
kJR
150
15kJ
C15
2
0.1u
R17
415
kJ
5 5
4 4
3 3
2 2
1 1
DD
CC
BB
AA
MC
U P
WB
(N
ois
e fi
lter
/Pu
ll-u
p s
ecti
on
) (A
L-2
030/
2040
CS
)7/
13
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 7
KE
YIN
2#
KE
YIN
1#
KE
YIN
2#K
EY
IN1#
EN
5V
24V
INT
24V
PG
ND
5V
INT
5V
PG
ND
5V
5VE
N5V
PG
ND
HLO
UT
(5)
/PR
(5)
/MC
(5)
/BIA
S(5
)/T
C(5
)
12V
IN(7
)
3.3V
IN(7
)
/GR
IDL
(5)
FW
(4)
/PO
FF
(5)
PS
L(1
)
(SE
LIN
2)(4
)
KE
YIN
1(4
)
(OP
_DA
TA
)(4
)
(SE
LIN
3)(4
)
KE
YIN
2(4
)
PS
W(7
)
ON
L(1
)
(OP
_CLK
)(4
)(S
ELI
N1)
(4)
(OP
_LA
TC
H)
(4)
(ST
RO
BE
)(4
)
DR
ST
(7)
To
Op
erat
ion
al P
WB
To
Po
wer
un
it
R19
01k
J
C193
0.1u/50V
D31
KD
S22
6(op
en)
213
R40
0N
.M._
1608
size
C19
5
1000
p
C19
5
1000
p
CN
2
IMS
A-9
619S
-18A
123456789101112131415161718
R18
710
kJ
Q5
KR
C10
6SQ
5K
RC
106S
1
2
3
C194
N.M._1608size
Q6
KR
C10
6SQ
6K
RC
106S
1
2
3
CP7
0603FA1.5A/0603SFF150FM
CN
1
B24
B-P
ND
ZS
-1
1 3 5 7 9 11 13 15 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24
D30
KD
S22
6(op
en)
213
R18
810
kJ
C19
1
1000
p
C19
2
1000
p
CP8
0603FA1.5A/0603SFF150FM
R18
91k
J
5 5
4 4
3 3
2 2
1 1
DD
CC
BB
AA
MC
U P
WB
(C
on
nec
tor
sect
ion
1)
(AL
-203
0/20
40C
S)
8/13
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 8
24V
PG
ND
5V5V
24VPG
ND
5V
24V
24V
SP
FM
T
24V
5V
5V
5V
VC
C3
5V
PG
ND
24V
INT
24V
PG
ND
24V
Dup
MT
24V
PG
ND
24V
5V
24V
PG
ND
INT
5V
5V
/VF
MC
NT
(5)
TM
B_O
(6)
/RR
S(5
)
PD
1(7
)
/DM
T1
(6)/C
PF
S1
(5)
24V
1(D
SW
S)
(7)
/MP
FS
(5)
SP
ID(7
)
PP
D1
(7)
VF
MO
UT
(5)
TM
A_O
(6)
PO
D(7
)
/DM
T0
(6)
SP
MT
_1(6
)
/DM
T3
(6)
PP
D2
(7) RT
H_I
N(5
)
MF
D(7
)
SP
PD
(7)
CE
D1
(7) /D
MT
2(6
)
SP
MT
_3(6
)
TxD
(1)
PD
2(7
)PP
D3
(7)
CE
D2
(7)/C
PF
S2
(5)
OU
T_B
+(6
)O
UT
_A-
(6)
OU
T_B
-(6
)
OU
T_A
+(6
)
/MM
D(5
)M
MLD
(7) /M
MC
LK(5
)
/MC
NT
(5)
FA
NLK
(7)
RxD
(1)
/PM
D(5
)
PM
CLK
_A(5
)P
MR
DY
(7)
/SY
NC
(4)
/LD
EN
(5)
/VID
EO
(4)
SH
OLD
(5)
SP
MT
_0(6
)S
PM
T_2
(6)
(Wh
ite)
(Wh
ite)
To
SP
F u
nit
(Fo
r d
ebu
g)
To
Pap
er d
etec
t
(Red
)
CP
U S
eria
l
(Wh
ite)
(Blu
e)
To
Cas
sett
e p
aper
so
len
oid
(Wh
ite)
(Wh
ite)
Not m
ou
nted
To
Po
lyg
on
mo
tor
To
Pap
er p
ass
det
ect
To
Fan
mo
tor
To
HL
un
it
(Bla
ck)
To
Cas
sett
e d
etec
t
(Red
)
To
To
ner
mo
tor
(Red
)
To
Du
ple
x m
oto
r
To
Inte
rlo
ck s
wit
ch
To
Mu
lti u
nit
To
Pap
er o
ut
det
ect
To
Res
ist
rolle
r so
len
oid
To
2n
d. c
asse
tte
To
Mir
ror
mo
tor
To
Mai
n m
oto
rT
o M
ech
a. C
OU
NT
ER
(Red
)
(Red
)
Fo
r A
L20
40 M
od
el O
nly
Fo
r A
L20
40 M
od
el O
nly
(Gre
en)
To
LD
(Wh
ite)
CN
18
B14
B-P
HD
SS
-B
1 3 5 7 9 11 13
2 4 6 8 10 12 14
CN
10
B3B
-PH
-K-S
1 2 3
CN
12
B3B
-PH
-K-E
1 2 3
R140
200J 1/4W
CN
16
B3B
-PH
-K-R
1 2 3
R20
820
0J 1
/4W
CN
19
B3B
-PH
-K-S
1 2 3
CN
17
N.M
._B
4B-P
H-K
-S
1 2 3 4
CN
6
B5B
-PA
SK
-1
1 2 3 4 5
CN
13
B05
B-X
AS
K-1
1 2 3 4 5
CN
7
B3B
-PH
-K-K
1 2 3
R20
520
0J 1
/4W
R20
320
0J 1
/4W
C20
1
1000
p
R20
420
0J 1
/4W
C20
0
1000
p
C19
9
1000
p
CN
25
B3B
-PH
-K-M
1 2 3
C2050.1u/50V
C2060.1u/50V
D42
KD
S22
6
213
CN
24
B12
B-P
H-K
-S
1 2 3 4 5 6 7 8 9 10 11 12
C19
8
1000
p
C2021000p
CN
11
B4B
-PH
-K-S
1 2 3 4
C2031000p
CN
15
B2P
-VH
-R
1 2
CN
28
N.M
._B
03B
-PH
-K-R
123
C2041000p
C246N.M.
CN
23
B2P
-VH
1 2
R207
200J 1/4W
CN
22
B5B
-PH
-K-S
1 2 3 4 5
CN
41
B05
B-C
ZH
K-B
1 2 3 4 5
CN
26
B5B
-PH
-K-R
1 2 3 4 5
C247
N.M._1608size
CN
4
B4B
-PH
-K-R
1 2 3 4
R20
61k
J
CN
42
B08
B-C
ZH
K-B
1 2 3 4 5 6 7 8
5 5
4 4
3 3
2 2
1 1
DD
CC
BB
AA
MC
U P
WB
(C
on
nec
tor
sect
ion
2)
(AL
-203
0/20
40C
S)
9/13
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 9
AF
E_D
B#0
AF
E_D
B#6
AF
E_D
B#6
VC
L
AF
E_D
B#4
AF
E_D
B#0
AF
E_D
B#7
AF
E_D
B#3
VC
L
AF
E_D
B#7
AF
E_D
B#5
AF
E_D
B#1
VC
L
AF
E_D
B#4
AF
E_D
B#2
AF
E_D
B#5
AF
E_D
B#3
AF
E_D
B#2
AF
E_D
B#1
PG
ND
PG
ND
VC
C3
PG
ND
24V
12V
EN
5V
CL
(2)
AF
E_S
DI#
(4)
CC
D_C
P#
(4)C
CD
_PH
I1#
(4)
VS
AM
P#
(4)
BS
AM
P#
(4)
AD
CLK
#(4
)
mt_
at_h
ome
(4)
AF
E_S
EN
#(4
)
CC
D_T
G#
(4)
CC
D_R
S#
(4)C
CD
_PH
I2#
(4)
AF
E_S
CK
#(4
) AF
E_D
B#[
7..0
](4
)
To
Sca
nn
er u
nit
Co
py
Lam
p In
vert
er
R20
991
0J
C20
9
0.1u
/50V
R21
31k
J
CN
3
FF
4-32
-S15
D5
135791113151719212325272931
2468101214161820222426283032
R212
5.6kJ 1/4W
CP
9
0603
FA
1.5A
/060
3SF
F15
0FM
+C
208
47u/
35V
+D
4411
EQ
S06
L6 220u
H
TW
KA
-221
K
R21
415
kJ
Q9
2SJ5
37
R21
556
kJ
C21
033
p
Q8
KT
C31
98
R21
015
kJ
CP
606
03F
A1.
5A/0
603S
FF
150F
M
R21
112
kJ
C21
1
1000
p
D43
KD
S22
6
213
CP
1006
03F
A1.
5A/0
603S
FF
150F
M
+C
207
47u/
35V
+
5 5
4 4
3 3
2 2
1 1
DD
CC
BB
AA
MC
U P
WB
(S
can
ner
I/F
sec
tio
n)
(AL
-203
0/20
40C
S)
10/1
3
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 10
VC
C3
VC
C3
VP
OU
T(2
)V
MO
UT
(2)US
B_I
N(4
)
OE
N(2
) VP
IN(2
)V
MIN
(2)
RC
V(2
)
SU
SP
EN
D(2
)
(D_C
ON
T)
(4)
F.G
C21
7
N.M
.
L7B
LM18
BB
121S
N1D
TP
567
IC31
US
B1T
20
IC31
MO
DE
1
OE
#2
RC
V3
VP
4
VM
5
SU
SP
EN
D6
GN
D7
NC
8
SP
EE
D9
D-
10D
+11
VP
O12
VM
O/F
SE
O13
VC
C14
D32
HZ
M6.
2Z4M
WA
(ope
n)
TP
568
C21
5
N.M
.
C21
2
100p
TP
569
R21
7
10kJ
R42
0N
.M.
TP
570
D45 ZE
NE
R_6
.2V
TP
571
L9 0J (
1608
)
L8B
LM18
BB
121S
N1D
R22
024
J
R21
624
J
TP
563
CN
33
UB
S21
-4K
2J00
(AC
ON
)
+5V
1
D-
2
D+
3
GN
D4
Shi
eld
L16
0J (
1608
)
C21
3
0.1u
R21
8
1.5k
J
TP
564
R22
133
JR
222
24J
TP
565
R22
333
J
C21
6
N.M
.
C21
4
0.1u
TP
566
R21
9N
.M.
R22
433
J
5 5
4 4
3 3
2 2
1 1
DD
CC
BB
AA
MC
U P
WB
(U
SB
2.0
(FU
LL
) I/F
sec
tio
n)
(AL
-203
0/20
40C
S)
11/1
3
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 11
EN
5V
EN
5V
VC
C3
24V
EN
5V
24V
PG
ND
/AS
IC_R
ST
(1,2
,4)
(CR
UM
SC
L)C
RU
MS
CL
(1)
(CR
UM
SD
TA
)C
RU
MS
DT
A(1
)
(CR
UM
SC
L)
TC
S(7
) DV
SE
L(7
)
(CR
UM
SD
TA
)
TC
S_A
N(5
)
5V
5V
3.3V
3.3V
CR
UM
Co
ntr
ol
(Wh
ite)
To
DV
Un
it w
ith
CR
UM
(An
alo
g T
on
ner
Sen
sor)
(Red
)
To
DV
Un
it(A
nal
og
To
nn
er S
enso
r)
F-G
ND
3
F-G
ND
4
F-G
ND
2
F-G
ND
1
TP
575
N.M
._B
10B
-PH
DS
S-B
CN
9
1 3 5 7 9
2 4 6 8 10
R20
010
JR
200
10J
D40
KD
S22
6
213
R36
90J
C22
0
0.1u
R13
91k
J
FB
1
0J (
1608
)
FB
1
0J (
1608
)
R23
10J
R23
210
kJ(o
pen)
IC32
TC
7SB
D38
5AF
U(o
pen)
A1
B2
OE
4G
ND
3
Vcc
5
R37
6N
.M.
TP
574
R20
2N
.M._
300J
TP
576
FB
4
0J (
1608
)
FB
4
0J (
1608
)
CN
5
B4B
-PH
-K-R
1 2 3 4
D39
KD
S22
6
213
IC34
NC
7ST
08M
5X(o
pen)
1 2 3
4
5
FB
2
0J (
1608
)
FB
2
0J (
1608
)
R22
5N
.M.
TP
573
TP
572
R22
610
kJ
C21
80.
1u
R36
8N
.M.
R20
1N
.M._
300J
FB
3
0J (
1608
)
FB
3
0J (
1608
)
5 5
4 4
3 3
2 2
1 1
DD
CC
BB
AA
MC
U P
WB
(C
RU
M I/
F s
ecti
on
) (A
L-2
030/
2040
CS
)12
/13
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 12
/ST
B
PA
RA
D7
PA
RA
D6
/INIT
/AC
KB
US
Y
/FA
ULT
PA
RA
D1
SLC
T
PA
RA
D2
PA
RA
D3
/RE
V
PA
RA
D4
/SLC
TIN
PA
RA
D5
/AU
TO
FD
PE
PA
RA
D0
VC
C3
EN
5V
EN
5VV
CC
3
/OA
_RS
T(2
)
PA
RA
D[7
..0]
(2)
/RE
V(2
)/IN
IT(2
)/SLC
TIN
(2)
/AU
TO
FD
(2)
/ST
B(2
)/FA
ULT
(2)
SLC
T(2
)P
E(2
)B
US
Y(2
)/A
CK
(2)
To
NIC
PW
B
Fo
r A
L20
40 M
od
el O
nly
C25
3
0.1u
CP12
0603FA1.5A/0603SFF150FM
C25
4
0.1u
CP11
0603FA1.5A/0603SFF150FM
CN
39
24F
MN
-BT
K-A
123456789101112131415161718192021222324
R40
2N
.M.
R40
11k
J
C25
1
0.1u
C25
2
0.1u
TP
459
TP
462
TP
460
TP
461
A A
B B
C C
D D
E E
44
33
22
11
MC
U P
WB
(N
IC In
terf
ace
sect
ion
) (A
L-2
030/
2040
CS
)13
/13
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 13
2. OPERATION PWB (AL-2030/2040CS)
DR
ST
D-G
ND
ON
L
SE
LIN
1
D-G
ND
KIN
1
SE
LIN
3
OP
-ST
B
KIN
2
5VDR
ST
PS
W
SE
LIN
2
OP
-CLK
OP
-DA
TA
5VE
NP
SL
D-G
ND
D-G
ND
DR
ST
D-G
ND
KIN
1
KIN
2
SE
LIN
3
SE
LIN
2
SE
LIN
1
PS
W
5VD-G
ND
D-G
ND
OP
-ST
B
OP
-CLK
OP
-DA
TA
PS
LO
NL
5VE
N
OP
-LA
TC
H
OP
-LA
TC
H
+5V
+5V
+5V
+5V
+5V
+5V
+5V
+5V
+5V
+5V
+5V
5VE
N
ON
LP
SL
ON
LP
SL
5VE
N
LEDM
f1
e1
a1
g1
d1
b1
c1
a2
g2
d2
f2
e2
b2
c2
a3
g3
d3
e3
b3
c3
LEDM
f3
DU
22A
EM
PL
PE
ME
ZP
LD
U21
SP
FL
JPL
CS
1LD
PL
EX
LE
XD
EX
NC
S2L
DA
A1
SC
NL
SJA
LB
PL
1EN
RT
PL
3RE
2RE
1RE
NO
RD
AA
22E
NR
PM
LO
NLL
DU
PK
EX
UP
K
EX
DW
K
EX
MO
DK
ZU
PK
ZD
WK
CR
SK
BP
K
10U
PK
MA
GK
SC
NK
OLK
CLK
1UP
K
PS
W
CV
OP
RP
L
SK
QN
AB
D01
0
SW
16
LTL-
1LH
EE
-002
A
LED
74
TP
52
d1Q
306
2SB
1197
K
2
13
C3411000p
CN
304
18F
MN
-BM
TT
R-A
-TB
123456789101112131415161718
SK
QN
AB
D01
0S
W19
IC30
6
74H
C15
1
D0
4
D1
3
D2
2
D3
1
D4
15
D5
14
D6
13
D7
12
A11
B10
C9
G7
W6
Y5
VC
C16
GN
D8
SK
QN
AB
D01
0S
W23
C3471000p
b2
TP
25
R38
210
0J
TP
5
C3391000p
g2
TP
42
d3
D31
7
1SS
133
LTL-
1LH
G-0
02A
LED
98
C32
8
200P
F
TP
59
C3361000p
C35
4
N.M
.
LTL-
1LH
G-0
02A
LED
79
TP
36
TP
45
LTL-
1LH
G-0
02A
LED
90
TP
53
R36
347
0J
R4014.7KJ
SK
QN
AB
D01
0S
W28
R37
615
0J
LTL-
1LH
G-0
02A
LED
70
D31
3
1SS
133
TP
2
C3321000p
TP
16
TP
26T
P6
R3974.7KJ
R40
915
0J
R37
215
0J
LTL-
1LH
G-0
02A
LED
61
TP
43
C34
3
2200
0PF
R41
651
0J
TP
60
TP
46
C3291000p
TP
54
LTL-
1LH
EE
-002
A
LED
94
R36
815
0J
LTL-
1LH
G-0
02A
LED
75
R42
610
kJ
TP
18
R42
215
0J
C34
6
200P
F
c1
R38
710
0J
IC30
5
74H
C15
1
D0
4
D1
3
D2
2
D3
1
D4
15
D5
14
D6
13
D7
12
A11
B10
C9
G7
W6
Y5
VC
C16
GN
D8
TP
17
TP
27
TP
49
SK
QN
AB
D01
0S
W24
R4064.7KJ
TP
7
a2
C34
9
0.1u
F
TP
28
C34
8
2200
0PF
R42
51k
J
R38
310
0J
C34
5
200P
FT
P61
f3
TP
47
C3401000p
c3
LTL-
1LH
G-0
02A
LED
99
SK
QN
AB
D01
0S
W20
TP
55
LTL-
1LH
G-0
02A
LED
80
R42
71k
J
D31
81S
S13
3
LTL-
1LH
G-0
02A
LED
91
TP
13
TP
19 R38
010
0J
R4314.7KJ
TP
50
R36
447
0J
R40
210
0J
LTL-
1LH
G-0
02A
LED
71
TP
8
g1
TP
29
D31
41S
S13
3
TP
51
C3331000p
TP
62
TP
65
f2
TP
48
R3984.7KJ
IC30
4
LC79
35A
N
IC30
4
/Q333
/Q434
/Q536
/Q637
/Q738
/Q940
/Q1041
/Q1142
/Q17 1
/Q18 2
/Q19 3
/Q20 4
/Q216
/Q227
/Q238
/Q249
/Q2510
/Q2611
/Q1243
/Q1345
/Q1446
/Q1547
/Q839
/Q131
VCC 63
/STROBE 51
BEO 49
/LATCH 50
S IN 30
CLOCK 64
S OUT 19
GND1 5
GND2 14
GND3 35
GND4 44
GND5 62
/Q31 17
/Q30 16
/Q2813
/Q2712
/Q32 18
/Q16 48
/Q232
/Q29 15
TP
56
R37
315
0J
Q30
42S
B11
97K
2
13
R41
71K
J
SK
QN
AB
D01
0S
W29
C35
1
N.M
.
TP
20
C3301000p
LTL-
1LH
G-0
02A
LED
95
LTL-
1LH
G-0
02A
LED
72
R3944.7KJ
b1
TP
9
R3914.7KJ
CN
303
S3B
-PH
-K-S
1 2 3
R36
915
0J
TP
30
R38
810
0J
R41
31K
J
SK
QN
AB
D01
0S
W25
LTL-
1LH
G-0
02A
LED
67
TP
15
TP
63 TP
66
R40
710
0J
C35
0
0.1u
F
R42
11K
J
TP
57
CN
305
NM
_ S
3B-P
H-K
-R
(RE
D)
1 2 3
R41
81K
JR
410
150J
SK
QN
AB
D01
0S
W21
b3
R38
410
0J
R37
815
0J
TP
21
LTL-
1LH
G-0
02A
LED
81
LTL-
1LH
G-0
02A
LED
92
R40
410
0J
TP
10
D31
91S
S13
3
TP
31
C3371000p
R42
31.
5KJ
LTL-
1LH
G-0
02A
LED
76
f1
TP
37
TP
64 TP
67
SK
QN
AB
D01
0S
W17
R4034.7KJ
d2
D31
51S
S13
3
C3341000p
TP
22
R36
515
0J
TP
70
R3994.7KJ
LTL-
1LH
G-0
02A
LED
96
R37
415
0J
TP
11
C35
2
N.M
.
LTL-
1LH
G-0
02A
LED
77
D31
1
1SS
133
TP
32
C3311000p
a1
TP
38
TP
68
SK
QN
AB
D01
0S
W26
R3954.7KJ
SK
QN
AB
D01
0S
W30
R40
815
0J
R37
015
0J
LTL-
1LH
EE
-002
A
LED
68
R3924.7KJ
R41
451
0J
R38
910
0J
TP
71
SK
QN
AB
D01
0S
W22
a3
R41
91K
J
R36
615
0J
TP
12
R38
510
0J
e2
R37
715
0J
R41
11.
5KJ
TP
33
LTL-
1LH
G-0
02A
LED
102
R4054.7KJ
TP
39
TP
69
LTL-
1LH
G-0
02A
LED
73
R42
810
kJ
D32
01S
S13
3
e1
R38
110
0J
SK
QN
AB
D01
0S
W18
R33
91K
J
C3381000p
R42
410
kJ
c2
D31
6
1SS
133
TP
23
g3
C3351000p
LTL-
1LH
G-0
02A
LED
97
e3
LTL-
1LH
G-0
02A
LED
78
R4004.7KJ
TP
40
LTL-
1LH
EE
-002
A
LED
89
R42
91k
J
R37
515
0J
TP
1
D31
21S
S13
3
Q30
52S
B11
97K
2
13
C35
3
N.M
.
TP
34
R37
915
0J
SK
QN
AB
D01
0S
W27
R43
010
0J
NM
_LT
L-1L
HE
E-0
02A
LED
69
R3964.7KJ
R3934.7KJ
C34
4
200P
F
R37
115
0J
R41
51K
J
C34
2
47uF
/16V
TP14
TP
24
R39
010
0J
C355
NM_1000p
LTL-
1LH
G-0
02A
LED
60
LTL-
1LH
G-0
02A
LED
101
TP
41
R36
715
0JR
420
150J
TP
3
TP
58
R38
610
0J
LTL-
1LH
G-0
02A
LED
93
R41
21.
5KJ
TP
35
TP
44
A A
B B
C C
D D
E E
44
33
22
11
OP
ER
ATI
ON
PW
B (7
SE
G) (
AL-
2030
/204
0CS
)1/
1
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 14
3. MCU PWB (AL-2050CS)A A
B B
C C
D D
E E
44
33
22
11
CPUCLK
(FW)
/LWR#
/CS0#
/CS2#
CPU_SYNC
/CS1#
SCL
CCD_TG
SDA
ARB_INT
A0
A5
A2
A4
A11
A19
A13
A3
A8
A10
A7
A12
A16
A14
A18
A1
A15
A17
A6
A9
/HWR#
/RD#
(SPPD)
CPU_
SYNC
/RE
S_NIC
(PSW)
CCD_TG
(FW)
ARB_INT
/CS3#
/RE
S_U
SB20PROTECT
DMT3
/WDTOVF
D14
P60
POFF
D8
D5
D1
DMT0
D1
D15
D7
D11
D3
D0
D12
D11
D13
D8
D3
P60
D10
D4
D7
D5
DMT1
D9
DMT2
D6
D2
D9
D14
D6
D4
D10
/STBY
/STBY
ST
D12
D15
D2
D13
/ES_SRDY
ES_CMD
ES_
ST
S
ES_CMD
/ES_
SRDY
ST
ES_ST
S
/RD#
/LWR#
/HWR#
DMT3
DMT0
DMT2
DMT1
NMI
NMI
/WDTOVF
RSV_IN0
EXTAL
XTAL
SPFMT1
SPFMT3
SPFMT2
SPFMT0
/ES_PAGE
D0
RY/BY
RxD
SPFMT0
SPFMT1
SPFMT2
/TRAN
SST
SPFMT3
/SCAN
ST
/ES_PAGE
/SCAN
SP
RY/BY
/CS5#
/CS5#
/SCAN
ST
/SCAN
SP
/TRAN
SST
/RE
S_FAX
/RE
S_NIC
/RE
S_U
SB20
/RE
S_OA982
/RE
S_IOA
SIC
/RE
S_GA
SIC
/RE
S_GA
SIC
/RE
S_IOA
SIC
/RE
S_OA982
/CS3#
/CS1#
/CS0#
/CS2#
A20
CPUCLK
EXTALXTAL
/RE
S_FAX
SCL
RxD
SDA
TXD
POFF
CRUM
SDA
TxD
CPU3.3
CPU3.3
VCC3
VCC3
VCC3
A[20
..0]
(2,3,4)
(PSW)
(8)
CCD_TG
(2,5)
ST
(2)
CPU_SYNC
(2)
ARB_INT
(2)
D[15
..0]
(2,3,4,13)
(SPPD)
(8)
(FW)
(5,9)
DMT2
(7)
DMT1
(7)
DMT0
(7)
DMT3
(7)
(TC
S_AN)
(6)
RTH
(6)
ES_ST
S(9)
ES_CMD
(9)
/HWR
(3,4)
/LWR
(2)
/ES_SRDY
(9)
/CSIOA
SIC
(3)
/CSGA
SIC
(2)
/CS
SRAM
(4)
/CSFROM
(4)
SDA
(4)
MMCLK
(6)
/RD
(2,3,4,5)
POFF
(6)
TxD
(12)
RxD
(12)
SCL
(4)
BZR
(11)
/ES_PAGE
(9)
CRUM
SDA
(16)
CRUM
SCL
(16)
SPFMT3
(5)
SPFMT0
(5)
SPFMT1
(5)
/SCAN
SP
(2)
PMCLK
(6)
SPFMT2/MIRCNT
(5)
/TRAN
SST
(2)
/SCAN
ST
(2)
RY/BY
(4)
/CS5
(13)
CPUCLK#
(3)
/RE
SET1
(5)
VIDEO#
(2,5)
LCDCONT
(6)
RE
SETOUT1
(5)
mt_
at_
hom
e#
(5)
/RE
S_U
SB20
(10)
/RE
S_FAX
(13)
/RE
S_OA982
(9)
/RE
S_GA
SIC
(2)/RE
S_IOA
SIC
(3)
/RE
S_NIC
(15)
(PSFANLK)
(8)
TP9
TP65
TP35
TP86
C200.1U
C250.1U
BR7
NM_10KJX4
1 2 3 4
8 7 6 5
FB1
0J<1608>
R132
10KJ
R26
10KJ
R364
33J
TP52
TP66
TP22
R94
10KJ
R51
33J
TP79
BR2133JX4
1234
8765
TP101
BR9
NM_10KJX4
1 2 3 4
8 7 6 5
TP32
TP81
R4
NM
TP72
R23
2KJ
TP106
BR2233JX4
1234
8765
TP44
R5033J
BR3
10KJX4
1 2 3 4
8 7 6 5
TP95
IC2
H8
S/2321
HD
6412
321V
F25
(H8S
/232
1)
P35/SCK1
64
P34/SCK0
63
P33/R
xD1
62
P32/R
xD0
61
P31/T
xD1
60
P30/T
xD0
59
VCC
58
PD7/D15
57
PD6/D14
56
PD5/D13
55
PD4/D12
54
Vss
53
PD3/D11
52
PD2/D10
51
PD1/D9
50
PD0/D8
49
PE7/D7
48
PE6/D6
47
PE5/D5
46
PE4/D4
45
Vss
44
PE3/D3
43
PE2/D2
42
PE1/D1
41
PE0/D0
40
VCC
39
AV
cc
103
Vref
104
P40/AN0
105
P41/AN1
106
P42/AN2
107
P43/AN3
108
P44/AN4
109
P45/AN5
110
P46/AN6/DA0
111
P47/AN7/DA1
112
AV
ss
113
Vss
114
P17/PO15/TIOCB2/TCLKD
115
P16/PO14/TIOCA2
116
P15/PO13/TIOCB1/TCLKC
117
P14/PO12/TIOCA1
118
P13/PO11/TIOCD0/TCLKB
119
P12/PO10/TIOCC0/TCLKA
120
P11/PO9/TIOCB0/DACK1
121
P10/PO8/TIOCA0/DACK0
122
MD0
123
MD1
124
MD2
125
PG0/CA
S126
PG1/C
S3
127
PG2/C
S2
128
PG3/CS11
PG4/CS02
Vss3
NC4
VCC5
PC0/A06
PC1/A17
PC2/A28
PC3/A39
Vss10
PC4/A411
PC5/A512
PC6/A613
PC7/A714
PB0/A815
PB1/A916
PB2/A1017
PB3/A1118
Vss19
PB4/A1220
PB5/A1321
PB6/A1422
PB7/A1523
PA0/A1624
PA1/A1725
PA2/A1826
PA3/A1927
Vss28
PA4/A20/IRQ429
PA5/A21/IRQ530
PA6/A22/IRQ631
PA7/A23/IRQ732
P67/CS7/IRQ333
P66/CS6/IRQ234
Vss35
Vss36
P65/IRQ137
P64/IRQ038
P53/ADTRG102
P52/SCK2101
Vss100
Vss99
P51/RxD298
P50/TxD297
PF0/BREQ96
PF1/BACK95
PF2/LCAS/WAIT/BREQO94
PF3/LWR93
PF4/HWR92
PF5/RD91
PF6/AS90
VCC89
PF7/088
Vss87
EXTAL86
XTAL85
VCC84
STBY83
NMI82
RES81
WDTOVF80
P20/PO0/TIOCA379
P21/PO1/YICOB378
P22/PO2/TIOCC377
P23/PO3/TIOCD376
P24/PO4/TIOCA475
P25/PO5/TIOCB474
P26/PO6/TIOCA573
P27/PO7/TIOCB572
P63/TEND171
P62/DREQ170
P61/TEND0/CS569
Vss68
Vss67
P60/DREQ0/CS466
Vss65
TP13
TP59
TP40
TP24
TP43
TP2
TP48
TP15
BR2333JX4
1234
8765
TP70
BR5
10KJX4
1 2 3 4
8 7 6 5
TP26
TP10
TP98
TP93
TP84
C2
0.1U
TP734
C70NM
BR2433JX4
1234
8765
TP724
TP17
C4
100P
R52
10KJ
TP67
TP28
TP76
TP51
TP102
TP87
R19
10KJ
C833P
TP80
BR2533JX4
1234
8765
R12
22J
R16
33J
TP6
R66
10KJ
BR10
10KJX4
1234
8765
TP54
TP56
TP19
R2
NM
TP107
TP90
C1222P
R11
10KJ
BR16
33JX4
1 2 3 4
8 7 6 5
C14NM
TP73
BR6
10KJX4
1 2 3 4
8 7 6 5
C13NM
C6
12P
C15NM
BR17
33JX4
1 2 3 4
8 7 6 5
R17
33J
TP96
BR13
10KJX4
1 2 3 4
8 7 6 5
R20
330J
TP61
TP11
R9
10KJ
C933P
R1
NM
TP735
TP64
X1AT-49
19.6608MHz
BR18
33JX4
1 2 3 4
8 7 6 5
R67
10KJ
TP37
TP29
TP5
TP103
TP99
TP85
TP78
TP36
C210.1U
BR19
33JX4
1 2 3 4
8 7 6 5
R18
33J
R384
33J
TP69
TP38
TP20
C220.1U
TP108
R3
0J
TP47
TP88
BR20
33JX4
1234
8765
R13
33J
R6
NM
C230.1U
C733P
TP7
TP55
TP23
BR12
10KJX4
1 2 3 4
8 7 6 5
TP33
TP3
C10NM
TP109
TP68
C240.1U
R5
10KJ
TP12
TP91
TP82
R78
1KJ
TP42
TP75
TP46
TP14
TP1
TP25
R7
0J
TP729
R8
NM
C19
10U/10V<2012>
TP30
C3
100P
C5
15PF
TP63
TP16
TP97
BR1
10KJX4
1 2 3 4
8 7 6 5
TP49
TP27
R22
33J
R392
10KJ
R21
2KJ
TP74
R95
10KJ
TP50
TP8
BR11
10KJX4
1 2 3 4
8 7 6 5
TP100
C369NM
TP53
TP34
TP71
R15
100J
L1NM_ZJSR5101-223TA
TP4
TP21
TP94
TP89
R25
33J
TP57
R24
10KJ
TP31
BR2
10KJX4
1 2 3 4
8 7 6 5
IC1
CY25811
SC
XIN/CLKIN
1
XOUT
8VDD
7
VS
S2
SSCLK
5FR
SEL
6
S0
4
S1
3
R131
10KJ
TP92
TP83
C115PF
TP77
TP105
R14
33J
R53
10KJ
TP62
BR4
10KJX4
1 2 3 4
8 7 6 5
TP41
C11
NM
MC
UP
WB
(CP
Use
ctio
n)
(AL
-205
0CS
)1/
16
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 15
MM_BI2
MM_AI0
MM_BI1
MM_AI2
MM_BI0
MM_AI1
/INIT
/SLCTIN
/AUTOFD
/STB
PARAD7
PARAD6
PARAD5
PARAD4
PARAD3
PARAD2
PARAD1
PARAD0
VPIN
RCV
VMIN
/POREQ
/PIREQ
PODATA0
PODATA1
PODATA2
PODATA3
PODATA4
PODATA5
PODATA6
PODATA7
CLK
SW
MEM_INT
/INREQ
/OUTACK
/FAXPRO
/PCLPRO
/OUTC
S
A8
D9
D7
RAM_CLK_OUT
D4
D2
MEM_INT
MM_AI0
D8
PFCLKIN
D15
PFCLKOUT
D3
D0
A7A6
A5
CLKSW
MM_BI1
MM_BI0
MM_AI1
D1
D13
D5
D12D11
PFCLK
A4
A2A1
A9
A3
D6
SFCLK48
D10
PFCLK
SYNC#
D14
AFE_DB7
AFE_DB6
AFE_DB5
AFE_DB4
AFE_DB3
AFE_DB2
AFE_DB1
AFE_DB0
AFE_SDI
JTG_TDI
JTG_TM
S
JTG_TCK
JTG_TDO
MAD11
MAD8
MAD4
MAD1
MAD2
MAD5
MAD6
MAD9
MAD3
MAD0
MAD7
MAD12
MAD10
AFE_SDI
RAMDB15
RAMDB9
RAMDB5
RAMDB0
RAMDB3
RAMDB12
RAMDB12
RAMDB7
RAMDB6
RAMDB1
RAMDB8
RAMDB4
RAMDB2
RAMDB13
RAMDB9
RAMDB6
RAMDB8
RAMDB2
RAMDB1
RAMDB14
RAMDB7
RAMDB10
RAMDB5
RAMDB0
RAMDB11
RAMDB15
RAMDB10
RAMDB4
RAMDB11
RAMDB13
RAMDB14
/ESPRD
PODATA0
RAM_CLK_OUT
SYNC#
/SLCTIN
/INIT
PE
/FAULT
PARAD0
PARAD1
PARAD2
PARAD3
PARAD4
PARAD5
PARAD6
PARAD7
PIDATA5
PIDATA7
PIDATA0
PIDATA1
PIDATA3
PIDATA4
PIDATA6
PIDATA2
MM_BI2
MM_AI2
PODATA1
PODATA2
PODATA3
PODATA4
PODATA5
PODATA6
PODATA7
RCV
VPIN
VMIN
/REV
/ACK
BU
SY
SLCT
/AUTOFD
/STB
RSV_OUT0
RSV_OUT1
RSV_OUT2
PFCLKOUT
PFCLKIN
/PCLPRO/FAXPRO
/OUTACK/OUTCS
/INREQ
JTG_TCKJTG_TMS
JTG_TDIJTG_TDO
AFE_DB0
AFE_DB1
AFE_DB2
AFE_DB3
AFE_DB4
AFE_DB5
AFE_DB6
AFE_DB7
RAMDB3
SFCLK48B
SFCLK48A
SFCLK48
SFCLK48B
S1
SFCLK48A
S0
S1
G3.3V
VCC3
VCC3
VCC3
VCC3
G3
.3V
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
AFE_SEN
(5)
ADCLK
(5)
CCD_CP
(5)
CCD_PHI1
(5)
CCD_PHI2
(5)
CCD_TG
(1,5)
CL
(14)
CCD_R
S(5)
VSAMP
(5)
AFE_
SCK
(5)
BSAMP
(5)
/H_SYNC
(9)
PIDATA[7
..0]
(9)
PODATA[7
..0]
(9)
/POACK
(9)
/PIREQ
(9)
/POREQ
(9)
/PIACK
(9)
/PIWR
(9)
/SCAN
SP
(1)
/SCAN
ST
(1)
/TRAN
SST
(1)
ST
(1)
OP_CLK
(5)
TM
(5)
TM_
(5)
OP_LATCH
(5)
OP_DATA
(5)
MM_Y1
(6)
MM_PH_A
(7)
MM_AI0
(7)
MM_AI1
(7)
MM_PH_B
(7)
MM_BI0
(7)
MM_BI1
(7)
MM_Y2
(6)
MM_Y3
(6) BANK1
(4)
BANK0
(4)
/SDCA
S(4)
/SDRA
S(4)
/SDC
S(4)
DQM0
(4)
MAD[12..0]
(4)
/SDWDE
(4)
SDCKE
(4)
DQM1
(4)
CPF
S2
(6)
PR
(6)
HL
(6)
MPF
S(6)
MIRON
(5)
SPFON
(5)
KEY
SC1
(5)
KEY
SC3
(5)
KEY
SC2
(5)
(/A
SIC_R
ST)
(3,5)
/PR_LINE
(9)
/SC_LINE
(9)
/IMC_READY
(9)
RAMDB[15
..0]
(4)
A[20..0]
(1,3,4)
D[15
..0]
(1,3,4,13)
SDCLK
(4)
(/SYNC)
(5)
/REV_O
(15)
/FAULT_O
(15)
/ACK_O
(15)
BU
SY_O
(15)
PE_O
(15)
SLCT_O
(15)
PARAD[7
..0](15)
/RE
S_GA
SIC
(1)
GA
SIC_READY
(12)
AFE_DB[7
..0]
(14)
AFE_SDI
(5)
/RE
SET0
(4,5,9,12)
MIRCNT
(5)
CPU_SYNC
(1)
ARB_INT
(1)
/CSGA
SIC
(1)
/LWR
(1)
/RD
(1,3,4,5)
VIDEO#
(1,5)/LEND
(6)
MMD
(6)
PMD
(6)
TC
(6)
GRIDL
(6)
MC
(6)
BIA
S(6)VFMCNT_12V
(6)VFM_24V
(6)/FPOFF
(9)
CPF
S1
(6)
MRP
S3
(6)
MRP
S2
(6)
MRP
S1
(6)
LDEN
(6)
RR
S(6)
PTPUL
SE
(6)
/INIT_I
(15)
/STB_I
(15)
/AUTOFD_I
(15)
/SLCTIN_I
(15)
FWREN
(5)
TP875
TP260
C340.1U
TP879
TP835
TP157
TP865
TP845
TP236
R61
10KJ
TP226
TP173
TP160
C280.1U
TP819
C350.1U
TP195
R41
33J
R356
10KJ
C74
NMR59
33J
TP250
C37
10U/10V<2012>
TP821
C29212P
R69
10J
TP124
TP113
C360.1U
TP817
TP204
IC4
HG73C141HFV(LF)
AS
IC
CPU_DATA71
CPU_DATA62
CPU_DATA53
CPU_DATA44
CPU_DATA18
CPU_DATA36
CPU_DATA27
VCC(AC)5
CPU_DATA09
GND(AC)10
MIRCNT11
/CPUSYNC12
MEM_INT13
ARB_INT14
VCC(CORE)15
CPU_AD816
CPU_AD717
CPU_AD618
CPU_AD519
GND(CORE)20
RAM_CLK_IN21
CPU_AD422
CPU_AD323
CPU_AD224
CPU_AD125
CPU_AD026
/CPUCS27
SFCLK4828
GND(CORE)29
/CPUWR30
/CPURD31
/RESET32
PFCLK34
CLKSW35
GND(CORE)36
PFCLKOUT37
PFCLKIN38
GND(PLL)39
VCC(PLL)40
GND(PLL)41
VCC(PLL)42
TM2_15M43
/SYNC44
GND(AC)45
/VIDEO46
/LEND47
VCC(AC)48
OUTP00A49
OUTP02A51
OUTP03A52
OUTP04A53
OUTP05A54
OUTP06A55
VCC(CORE)57
OUTP15A56
OUTP07A58
OUTP08A59
GND(CORE)60
OUTP09A61
OUTP10A62
OUTP11A63
OUTP12A64
VCC(CORE)
86
OUTP13B
84
OUTP12B
83
OUTP10B
81
GND(AC)69
OUTP09B
80
OUTP08B
79
OUTP03B72
GND(CORE)
78
OUTP07B
77
OUTP06B
76
OUTP00B68
OUTP14A67
VCC(CORE)66
OUTP13A65
VCC(AC)74
OUTP04B73
OUTP11B
82
OUTP02B71
OUTP05B
75
OUTP14B
85
OUTP01B70
TSP_MODE
96
OPE_CLK
92
/TM
87
TM
88
OPE_DATA
89
OPE_LATCH
90
GND(AC)
91
VCC(AC)
93
/SCAN
SP
94
TSO0
95
IE1284_
STB
97
IE1284_AUTOFD
98
VCC(CORE)
99
IE1284_
SLCTIN
100
IE1284_INIT
101
IE1284_SLCT
102
GND(CORE)
103
IE1284_PE
104
IE1284_BU
SY
105
IE1284_ACK
106
IE1284_FAULT
107
VCC(CORE)
108
IE1284_REV
109
IE1284_PARAD7
110
IE1284_PARAD6
111
IE1284_PARAD5
112
IE1284_PARAD4
113
IE1284_PARAD3
114
IE1284_PARAD2
115
VCC(AC)
116
IE1284_PARAD1
117
IE1284_PARAD0
118
SU
SPEND
119
GND(AC)
120
OEN
121
VMOUT
122
VPOUT
123
GND(CORE)
124
VMIN
125
VPIN
126
RCV
127
/SCAN
ST
128
VCC(CORE)192
/INREQ191
/OUTCS190
/OUTACK189
/ESPRD188
/FAXPRD187
/PCLPRD186
GND(AC)185
MDAT15184
MDAT14183
MDAT13182
VCC(CORE)181
MDAT12180
MDAT11179
MDAT10178
VCC(AC)177
MDAT09176
MDAT08175
MDAT07174
GND(CORE)173
MDAT06172
MDAT05171
MDAT04170
VCC(CORE)169
MDAT03168
MDAT02167
MDAT01166
MDAT00165
GND(AC)164
/INCS163
/INACK162
/OUTREQ161
GND(CORE)160
/HSYNC159
PIDATA0158
PIDATA1157
PIDATA2156
VCC(AC)155
PIDATA3154
PIDATA4153
PIDATA5152
PIDATA6151
PIDATA7150
/POCS149
/POREQ
148
VCC(AC)
147
/PIWT
146
/PIACK
145
GND(AC)
144
/POACK
143
/PIREQ
142
GND(CORE)
141
PODATA0
140
PODATA1
139
PODATA2
138
PODATA3
137
PODATA4
136
PODATA5
135
PODATA6
134
PODATA7
133
VCC(CORE)
132
/TRAN
SST
131
/RECEPT
ST
130
ST
129
RAM_DATA4
256
RAM_DATA5
255
RAM_DATA6
254
RAM_DATA7
253
GND(AC)
252
RAM_DQM0
251
RAM_WDE
250
VCC(AC)
249
RAM_CA
S248
RAM_RA
S247
RAM_C
S246
RAM_BANK
S0
245
RAM_BANK
S1
244
VCC(CORE)
243
RAM_MAD10
242
RAM_MAD0
241
RAM_MAD1
240
GND(CORE)
239
RAM_MAD2
238
RAM_MAD3
237
GND(AC)
236
MM_AI2
235
MM_AI1
234
MM_AI0
233
MM_PH_A
232
AFE_DB3217
MM_BI2
231
MM_BI1
230
MM_Y2
225
VCC(AC)221
MM_Y1
226
AFE_DB0220
AFE_DB1219
GND(CORE)
223
AFE_DB2218
AFE_DB4216
AFE_DB5215
MM_BI0
229
MM_PH_B
228
VCC(CORE)
227
MM_Y3
224
CLPWM222
AFE_DB6214
AFE_DB7213
GND(AC)212
AFESCK211
VCC(CORE)210
ADCLK209
GND(CORE)208
AFE_SEN207
CCD_PH1206
CCD_PH2205
AFE_SDI204
CCD_CP203
BSAMP202
CCD_RS201
CCD_TG200
VSAMP199
GND(CORE)198
TD0197
TRSK195
TDI196
TCK193
TMS194
VCC(CORE)33
OUTP01A50
GND(CORE)
257
RAM_DATA3
258
RAM_DATA2
259
RAM_DATA1
260
RAM_DATA0
261
GND(AC)
262
RAM_DATA15
263
RAM_DATA14
264
VCC(CORE)
265
RAM_DATA13
266
RAM_DATA12
267
RAM_DATA11
268
RAM_DATA10
269
RAM_DATA9
270
RAM_DATA8
271
VCC(CORE)
272
RAM_DQM1
273
RAM_CKE
274
GND(AC)
275
RAM_CLK_OUT
276
GND(CORE)
277
RAM_MAD12
278
RAM_MAD11
279
RAM_MAD9
280
VCC(CORE)
281
RAM_MAD8
282
RAM_MAD7
283
VCC(AC)
284
RAM_MAD6
285
RAM_MAD5
286
RAM_MAD4
287
GND(AC)
288
CPUDATA15
289
CPUDATA14
290
CPUDATA13
291
CPUDATA12
292
CPUDATA11
293
CPUDATA10
294
CPUDATA9
295
CPUDATA8
296
TP221
TP162
TP228
TP151
BR51
82JX4
1 2 3 4
8 7 6 5
TP245
TP213
TP190
R359
10KJ
C390.1U
TP205
TP181
TP382
TP846
BR27
10KJX4
1234
8765
R70
0J
TP486
TP861
TP185
TP135
TP119
C66
NM
TP507
TP740
TP212
TP141
C420.1U
TP325
TP150
TP823
TP235
TP261
TP130
C29312P
R31
33J
BR38
33JX4
1 2 3 4
8 7 6 5
BR41
10KJX4
1 2 3 4
8 7 6 5
C400.1U
TP869
TP237
TP197
TP175
TP174
TP163
C399
10U/10V<2012>
C411
0.1U
BR30
33JX4
1 2 3 4
8 7 6 5
BR26
10KJX4
1234
8765
BR55
10KJX4
1 2 3 4
8 7 6 5
C410.1U
R73
NM
TP256
TP727
TP125
TP114
TP876
TP227
TP220
TP198
BR4733JX4
1 2 3 4
8 7 6 5
IC9
CY25814SC
XIN/CLKIN
1
XOUT
8VDD
7
VS
S2
SSCLK
5FR
SEL
6
S0
4
S1
3
TP847
BR32
33JX4
1 2 3 4
8 7 6 5
TP836
BR52
10KJX4
1 2 3 4
8 7 6 5
C380.1U
TP872
TP866
TP142
TP828
TP152
TP402
TP246
C29412P
C76
0.1U
BR2833JX4
1 2 3 4
8 7 6 5
TP490
TP187
BR53
10KJX4
1 2 3 4
8 7 6 5
C430.1U
R30
33J
TP627
TP862
TP207
TP238
TP136
TP120
BR4333JX4
1 2 3 4
8 7 6 5
R47
10KJ
TP215
TP741
TP159
C440.1U
C58
47P
C351
NM
TP825
TP736
TP199
R46
10KJ
TP719
TP153
R68
0J
TP252
TP168
TP144
TP165
TP240
TP229
TP131
BR60
10KJX4
1 2 3 4
8 7 6 5
C450.1U
R32
33J
TP214
TP192
R42
10KJ
R75
NM
TP177
TP206
TP184
BR31
10KJX4
1 2 3 4
8 7 6 5
BR3533JX4
1 2 3 4
8 7 6 5
BR36
33JX4
1 2 3 4
8 7 6 5
C7522000P
TP848
TP176
TP126
TP115
R54
33J
C460.1U
C60
47P
TP223
TP143
R134
NM
TP257
TP230
BR33
10KJX4
1 2 3 4
8 7 6 5
C400
10U/10V<2012>
TP403
BR49
10KJX4
1 2 3 4
8 7 6 5
BR57
10KJX4
1 2 3 4
8 7 6 5
R60
NM
C470.1U
R34
33J
R6533J
TP493
TP837
TP189
TP628
TP881
TP247
TP154
R63NM_33J
TP854
R62
10KJ
X2
NM_
SG8002DC(48MHz)
N.C
.1
VCC
8OUTPUT
5
GND
4
X7
AT-49(12MHz)
TP885
TP164
C480.1U
C62
47P
BR58
10KJX4
1 2 3 4
8 7 6 5
TP892
TP873
TP208
TP137
TP121
C107
10P
BR45
10KJX4
1 2 3 4
8 7 6 5
TP877
TP239
TP110
TP863
TP820
TP167
C77
NM_12P
TP855
TP818
TP742
TP242
TP222
TP200
X5AT-49(18
.3856MHz)
R33
33J
BR54
33JX4
1 2 3 4
8 7 6 5
BR59
10KJX4
1 2 3 4
8 7 6 5
C550.1U
TP746
TP737
C68
NM
R40
10KJ
TP258
TP867
TP132
TP140
C63
NM
C520.1U
C61
47P
BR56
33JX4
1 2 3 4
8 7 6 5
TP217
TP145
R55
33J
TP822
TP720
TP179
TP170
TP127
TP116
R133
33J
BR2933JX4
1 2 3 4
8 7 6 5
TP856
TP255
TP186
C29512P
C401
10U/10V<2012>
R3140J
TP827
C570.1U
R36
33J
TP462
TP232
TP178
TP495
TP201
TP156
R79
0J
TP630
C402
12P
TP146
C560.1U
C64
47P
TP248
TP191
TP155
TP231
C59
47P
TP216
TP193
TP209
TP882
TP857
TP138
TP122
C530.1U
R37
33J
TP161
TP111
BR37
33JX4
1 2 3 4
8 7 6 5
L2ZJSR5101-223TA
TP874
TP241
TP878
TP841
TP243
TP169
C29612P
R56
10KJ
C490.1U
C65
47P
TP253
TP824
TP738
TP147
C270.1U
TP864
TP834
TP133
TP842
TP743
TP224
BR39
33JX4
1 2 3 4
8 7 6 5
BR34
10KJX4
1 2 3 4
8 7 6 5
TP128
TP117
C510.1U
R39
33J
TP351
TP747
TP172
C310.1U
TP468
TP259
TP182
R35
33J
TP498
TP858
BR42
33JX4
1 2 3 4
8 7 6 5
TP859
TP234
TP188
C500.1U
C67
47P
TP843
TP210
TP225
TP202
TP180
TP158
C290.1U
TP891
TP219
C29712P
BR44
33JX4
1 2 3 4
8 7 6 5
TP249
C108
12P
C540.1U
R57
NM
C97
1000P
TP868
C300.1U
R92
NM
TP194
R44
33J
TP139
TP123
TP112
BR48
33JX4
1 2 3 4
8 7 6 5
TP211
C690.1U
TP844
TP149
BR4633JX4
1 2 3 4
8 7 6 5
FB2
NM_0J<1608>
R357
10KJ
C320.1U
TP254
TP244
R48
10J
R38
33J
TP203
TP166
TP171
C29112P
R58
NM
C80 47P
C375
12P
TP739
TP148
TP134
C330.1U
TP251
TP364
TP270
TP233
TP129
TP118
R358
10KJ
R49
10J
TP471
TP860
TP829
TP183
TP218
TP196
C29812P
FB3
0J<1608>
TP500
TP826
BR4033JX4
1 2 3 4
8 7 6 5
R45
10KJ
A A
B B
C C
D D
E E
44
33
22
11
MC
UP
WB
(AS
ICse
ctio
n)
(AL
-205
0CS
)2/
16
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 16
RSV_OUT16
D8
D14
RSV_OUT17
D13
RSV_IN2
D9D10
RSV_IN1
D12
D15
D11
A3
A0
A4
A1A2
LCDE
LCDR
S
/ES_CRDY
RSV_OUT12
RSV_OUT13
RSV_OUT10
RSV_OUT8
RSV_OUT11
RSV_OUT14
RSV_OUT15
RSV_OUT9
MSU_
ST1
IOIC3.3V
IOIC3.3V
VCC3
VCC3
VCC3
SELIN3
(11)
SELIN2
(11)
A[20
..0]
(1,2,4)
PSL
(11)
(CED2)
(8)
SFTMT1
(7)
D[15
..0]
(1,2,4,13)
SFTMT3
(7)
KEYIN
(11)
INFOLED
(11)
/RD
(1,2,4,5)
(DR
ST)
(8)
SFTMT0
(7)
SELIN1
(11)
CPUCLK#
(1)
/CSIOA
SIC
(1)
(RSV_SOL)(7)
/HWR
(1,4)
DSW
S(8)
(TC
S)
(8)
DV
S1
(8)
(PD1)
(8)
(CED1)
(8)
(PD2)
(8)
(SCOD)
(8)
LCDDB5
(5)
LCDDB4
(5)
LCDE
(5)
LCDDB6
(5)
LCDR
S(5)
LCDDB7
(5)
/ES_CRDY
(9)
MCNT
(6)
(SRJD)
(8)
(SPID)
(8)
SFTMT2
(7)
(PPD1)
(8)
PSFM
(6)
(PPD2)
(8)
(PPD3)
(8)
(POD)
(8)
(MFD)
(8)
(PMRDY)
(8)
(MMLD)
(8)
(FANLK)
(8)
THOPEN
(6)
(/A
SIC_R
ST)
(2,5) /RE
S_IOA
SIC
(1)
SPU
S(7)
SRVC
(7)
BL
(11)
MSU_ST1
(13)
IOA
SIC
TP299
L15
NM_ZJSR5101-223TA
TP279
C304
10U/10V<2012>
TP313
TP266
TP815
TP294IC52
SC65892(IOA
SIC)<LQFP100>
VDD
1
PHICLK
2
gn
d3
XCE0(PU50K)
4
CE1(PU50K)
5
XOE(PU50K)
6
XWR(PU50K)
7
A4(PU50K)
8
A3(PU50K)
9
A2(PU50K)
10
A1(PU50K)
11
A0(PU50K)
12
XR
ST(S
ch)
13
vdd
14
D7(PU50K)
15
D6(PU50K)
16
SMC(SCAN)(PD50K)
17
SIN(SCAN)(PD50K)
18
SOUT(SCAN)
19
AMC(SCAN)(PD50K)
20
SCK(SCAN)
21
D5(PU50K)
22
D4(PU50K)
23
D3(PU50K)
24
VDD
25
GND26
D2(PU50K)27
D1(PU50K)28
D0(PU50K)29
PORTA7(PD50K)(5VFS)30
PORTA6(PD50K)(5VFS)31
PORTA5(PD50K)(5VFS)32
PORTA4(PD50K)(5VFS)33
PORTA3(PD50K)(5VFS)34
PORTA2(PD50K)(5VFS)35
PORTA1(PD50K)(5VFS)36
PORTA0(PD50K)(5VFS)37
vdd38
PORTB7(PD50K)(5VFS)39
PORTB6(PD50K)(5VFS)40
PORTB5(PD50K)(5VFS)41
PORTB4(PD50K)(5VFS)42
PORTB3(PD50K)(5VFS)43
PORTB2(PD50K)(5VFS)44
PORTB1(PD50K)(5VFS)45
PORTB0(PD50K)(5VFS)46
PORTC7(PD50K)47
PORTC6(PD50K)48
PORTC5(PD50K)49
GND50
VDD
51
PORTC4(PD50K)
52
PORTC3(PD50K)
53
PORTC2(PD50K)
54
PORTC1(PD50K)
55
PORTC0(PD50K)
56
gnd
57
PORTD7(PD50K)
58
PORTD6(PD50K)
59
PORTD5(PD50K)
60
PORTD4(PD50K)
61
PORTD3(PD50K)
62
PORTD2(PD50K)
63
PORTD1(PD50K)
64
PORTD0(PD50K)
65
gnd
66
PORTE7(PD50K)
67
PORTE6(PD50K)
68
PORTE5(PD50K)
69
PORTE4(PD50K)
70
PORTE3(PD50K)
71
PORTE2(PD50K)
72
PORTE1(PD50K)
73
PORTE0(PD50K)
74
VDD
75
GND76
PORTF7(PD50K)77
PORTF6(PD50K)78
PORTF5(PD50K)79
PORTF4(PD50K)80
PORTF3(PD50K)81
PORTF2(PD50K)82
PORTF1(PD50K)83
PORTF0(PD50K)84
vdd85
PORTG7(PD50K)86
PORTG6(PD50K)87
PORTG5(PD50K)88
PORTG4(PD50K)89
PORTG3(PD50K)90
PORTG2(PD50K)91
PORTG1(PD50K)92
PORTG0(PD50K)93
XCE_EXT94
gnd95
SELA(OD,5VFS)96
SELB(OD,5VFS)97
SELC(OD,5VFS)98
YIN(PD50K)(5VFS)99
GND100
C6630.1U
TP311
TP265
TP303
TP320TP277
TP315
TP321
TP280
TP283
TP300
TP635
TP271
TP317
TP322
TP324
TP318
R122NM_10KJ
R707
4.7KJ
TP319
TP288
R706
NM_10KJ
12
TP316
TP304
TP290
R135
33J
TP272
FB13
0J<1608>
TP305
TP832
TP287
TP281
TP263
R263NM_10KJ
TP262
C5680.1U
C5750.1U
TP636
TP298
C7000.1U
R136
NM
TP286
TP289
C6620.1U
C6600.1U
TP273
TP269
TP296
TP282
TP274
TP284
TP278
TP302
TP267
TP308
C5740.1U
TP307
TP295
TP275
TP312
C98
1000P
TP309
TP285
R10
4.7KJ
TP293
C5690.1U
TP301
TP297
TP314
TP310
TP268
TP292
TP323
TP264
TP276
TP291
TP306
TP811
A A
B B
C C
D D
E E
44
33
22
11
MC
UP
WB
(I/O
AS
ICse
ctio
n)
(AL
-205
0CS
)3/
16
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 17
RAMDB0
RAMDB9
RAMDB10
RAMDB11
RAMDB12
RAMDB13
RAMDB14
RAMDB15
RAMDB7
RAMDB8
RAMDB3
RAMDB1
RAMDB5
RAMDB6
RAMDB2
RAMDB4
A12
A7
A10
A11
A17
A9
A12
A5
A16
A14
A1
D14
A15
A8
A6
D10
A2
A4
A10
A14
A13
A15
A3
A6
A16
A7
A11
A2
A4
A8
D9
A13
A9
A18
A19
A5
A1
A0
A3
MAD5
MAD2
MAD7
MAD9
MAD8
MAD3
MAD10
MAD11
MAD1
MAD0
MAD6
MAD4
MAD12
A20
D8
D11
D12
D13
D15
A17
D15
D7
D12
D14
D6D13
D5
D4
D11
D3D10
D2D9D1D8D0
A1
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
/CSFROM
(1)
MAD[12..0](2)
BANK0
(2)
BANK1
(2)
/SDC
S(2)
/SDWDE
(2)
/SDCA
S(2)
/SDRA
S(2)
DQM0
(2)
DQM1
(2)
SDCLK
(2)
SDCKE
(2)
D[15..0]
(1,2,3,13)
RAMDB[15..0](2)
/CS
SRAM
(1)
/RD
(1,2,3,5)
/HWR
(1,3)
A[20..0]
(1,2,3)
RY/BY
(1)
/RE
SET0
(2,5,9,12)
VPP
(9)
VPP
(9)
SCL
(1)
SDA
(1)
/HWR
(1,3)
/RD
(1,2,3,5)
Fla
sh
RO
MV
PP
Co
ntr
oll
Se
ria
lE
E-P
RO
M
TP334
TP337
TP346
TP326
TP852
TP813
TP343
R80NMC90
0.1U
R8310KJ
TP350
C91
0.1U
TP358
TP336
C92
0.1U
TP341
TP840
IC5
CAT24WC08LI
E0
1
E1
2
E2
3
VS
S4
SDA
5SCL
6WC
7VCC
8
C93
0.1U
TP359
C94
0.1U
TP353
TP365
TP338
C85
0.1U
R82NM
C95
0.1U
R86
NM
TP347
R81NM
C8722000P
TP352
TP367
TP816
TP851
TP812
TP889
TP340
C355NM
TP839
TP331
TP360
TP335
TP327
TP328
C89
0.1U
TP342
TP369
R77
NM
TP363
C353NM
TP357
TP339
TP354
TP850
C83
NM
IC7
S29AL016D70TFI020
A0
25
A1
24
A2
23
A3
22
A4
21
A5
20
A6
19
A7
18
A8
8A9
7A10
6A11
5A12
4A13
3A14
2A15
1A16
48
A17
17
DQ0
29
DQ1
31
DQ2
33
DQ3
35
DQ4
38
DQ5
40
DQ6
42
DQ7
44
DQ8
30
DQ9
32
DQ10
34
DQ11
36
DQ12
39
DQ13
41
DQ14
43
DQ15
45
A19
9
NC
10
A18
16
GND
46
GND
27
VCC
37
VPP
13
BYTE
47
OE
28
CE
26
WE
11
RP
12
WP
14
RY/BY
15
C352NM
C86NM
C354NM
R74
10KJ
TP838
TP345
IC6
SDRAM(16bit
x4b
ank)
A0
23
A1
24
A2
25
A3
26
A4
29
A5
30
A6
31
A7
32
A8
33
A9
34
A10
22
BA0
20
DQ0
2
DQ1
4
DQ2
5
DQ3
7
DQ4
8
DQ5
10
DQ6
11
DQ7
13
DQ8
42
DQ9
44
DQ10
45
DQ11
47
DQ12
48
DQ13
50
DQ14
51
DQ15
53
VCC
1
VCC
27
VS
S54
VS
S28
VCCQ
9
VS
S41
VCCQ
43
VCCQ
49
VS
SQ
6
VS
SQ
12
VS
SQ
46
VS
SQ
52
LDQM
15
UDQM
39
WE
16
CA
S17
RA
S18
CS
19
CLKE
37
CLK
38
NC
40
NC
36
VCCQ
3
VCC
14
BA1
21
A11
35
R84
10KJ
TP368
TP726
R85
0J
TP329
TP853
TP344
TP362
IC8
IS63LV1024L-12J-TR
I/O0
6A0
1
I/O1
7A1
2
I/O2
10
A2
3
I/O3
11
A3
4
I/O4
22
A4
13
I/O5
23
A5
14
I/O6
26
A6
15
I/O7
27
A7
16
A8
17
A9
18
A10
19
A11
20
A12
21
A13
29
A14
30
CS1
5
OE
28
WE
12
VDD
8
GND
9
VDD
24
A15
31
A16
32
GND
25
R76
100J
C84
0.1U
C82
0.1U
TP349
TP356
TP849
TP361
TP348
TP888
J1,J2
1 2 3
C88
0.1U
TP355
TP333
TP332
TP330
R88NM
TP366
A A
B B
C C
D D
E E
44
33
22
11
MC
UP
WB
(Mem
ory
sect
ion
)(A
L-2
050C
S)
4/16
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 18
/RE
SET#
/RE
SET#
AFE_
SDI#
AFE_
SEN#
CCD_TG#
VSAMP#
CCD_R
S#
CCD_PHI1#
CCD_CP#
ADCLK#
CCD_PHI2#
VSAMP#
CCD_TG#
CCD_R
S#
BSAMP#
CCD_CP#
CCD_PHI2#
CCD_PHI1#
ADCLK#
BSAMP#AFE_
SCK#
(/RD)
(PB_NOE)
(PB_NWE)
(PB_NAE0)
AFE_
SCK#
(/RD)
(PB_NOE)
(PB_NWE)
(PB_NAE0)
AFE_
SDI#
AFE_SEN#
VCC3
5V
VCC3
5V
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
5V
VCC3
(OP_DATA)
(11)
(OP_LATCH)
(11)
(SPFMT0)
(7)
OP_CLK
(2)
OP_DATA
(2)
SPFMT0
(1)
SPFMT1
(1)
SPFMT3
(1)
MIRON
(2)
SPFON
(2)
(SPFMT1)
(7)
(SPFMT2)
(7)
(SPFMT3)
(7)
TM
(2)
TM_
(2)
(TM)
(7)
(TM_)
(7)
SPFMT2/MIRCNT
(1)
MIRCNT
(2)
KEY
SC1
(2)
KEY
SC2
(2)
KEY
SC3
(2)
OP_LATCH
(2)
(OP_CLK)
(11)
/SYNC
(11)
(/SYNC)
(2)
/ASIC_R
ST
(16)
(/A
SIC_R
ST)
(2,3)
FW
(11)
(FW)
(1,9)
VIDEO#
(1,2)
/VIDEO
(11)
/RE
SET0
(2,4,9,12)
/RE
SET1
(1)
/OP_R
ST
(9,10)
/NIC_R
ST
(15)
/ASIC_R
ST
(16)
RE
SETOUT1
(1)
/FAX_R
ST
(13)
(/A
SIC_R
ST)
(2,3)
/OP_R
ST
(9,10)
mt_
at_
hom
e(14)
mt_
at_
hom
e#
(1)
AFE_
SDI
(2)
AFE_
SEN
(2)
AFE_
SCK
(2)
AFE_
SDI#
(14)
AFE_
SEN#
(14)
AFE_
SCK#
(14)
VSAMP
(2)
CCD_TG
(1,2)
VSAMP#
(14)
CCD_TG#
(14)
CCD_R
S(2)
BSAMP
(2)
CCD_R
S#
(14)
BSAMP#
(14)
CCD_CP
(2)
CCD_PHI1
(2)
CCD_CP#
(14)
CCD_PHI1#
(14)
CCD_PHI2
(2)
ADCLK
(2)
CCD_PHI2#
(14)
ADCLK#
(14)
/RD
(1,2,3,4)PB_NAE0
(9,10)
PB_NWE
(9,10)
PB_NOE
(9,10)
(PB_NOE)
(13)
(PB_NAE0)
(13)
(PB_NWE)
(13)
(/RD)
(13)
/RE
SET0
(2,4,9,12)
LCDDB4
(3)
LCDDB5
(3)
LCDDB6
(3)
LCDDB7
(3)
LCDE
(3)
LCDR
S(3)
LCDDB5#
(11)
LCDDB6#
(11)
LCDDB7#
(11)
LCDE#
(11)
LCDR
S#
(11)
LCDDB4#
(11)
(KEY
SC2)
(11)
(KEY
SC1)
(11)
(KEY
SC3)
(11)
FWREN
(2)
3.3
V
3.3
V3.3
V
5V
3.3
V
3.3
V
3.3
V3.3
V
5V
3.3
V
Re
se
tC
irc
uit
AS
ICR
es
et
OP
Re
se
t
3.3
V
C128
0.1U
TP381
TP718
R119
1KJ
C123
NM
TP386
TP397
TP415TP384
C99
47P
TP407
TP370 C1150.1U
TP895
C306
NM
R223
NM_0J
IC20
74VHCT244
1A1
2
1A2
4
1A3
6
1A4
8
2A1
11
2A2
13
2A3
15
2A4
17
1G
1
2G
19
1Y1
18
1Y2
16
1Y3
14
1Y4
12
2Y1
9
2Y2
7
2Y3
5
2Y4
3
VCC
20
GND
10
R344
33J
IC16
74LCX244
1A1
2
1A2
4
1A3
6
1A4
8
2A1
11
2A2
13
2A3
15
2A4
17
1G
1
2G
19
1Y1
18
1Y2
16
1Y3
14
1Y4
12
2Y1
9
2Y2
7
2Y3
5
2Y4
3
VCC
20
GND
10
R29
10KJ
R333
33J
C3100.01U
R338
33J
C124
NM
R373
33J
TP896
TP377
C290
1U<2012>
TP390
IC23
74LCX244
1A1
2
1A2
4
1A3
6
1A4
8
2A1
11
2A2
13
2A3
15
2A4
17
1G
1
2G
19
1Y1
18
1Y2
16
1Y3
14
1Y4
12
2Y1
9
2Y2
7
2Y3
5
2Y4
3
VCC
20
GND
10
TP412TP375
C307
NM
R101
100J
R354
33J
R110
NM_100J
TP786
R28
33J
C376
NM
TP897
R224
0J
TP395
C125
NM
R374
33J
C105
0.1U
R120
33J
R121
100J
R109
100J
TP417TP387
C308
NM
TP409
TP372 R355
33J
TP898
TP404
R100
33J
C255
0.1U
C120
NM
C126
NM
R375
33J
C104
NM
C17
0.01U
C311NM
TP899
TP396
C309
NM
TP414TP380 R360
33J
TP406
TP378
IC46
NM_TC7SH32FU
1 24
5 3
C127
0.1U
TP394
C26
47P
R376
33J
TP900
R64
33J
TP833
IC26
74LCX244
1A1
2
1A2
4
1A3
6
1A4
8
2A1
11
2A2
13
2A3
15
2A4
17
1G
1
2G
19
1Y1
18
1Y2
16
1Y3
14
1Y4
12
2Y1
9
2Y2
7
2Y3
5
2Y4
3
VCC
20
GND
10
TP419TP389
TP411
TP374
C121
NM
C129
NM
R332
33J
R336
33J
R27
100KJ
R91
33J
TP376
TP398
R361
33J
IC11
NC7WZ17
A1
1
A2
3
Y1
6
Y2
4
GND
2
Vcc
5
TP416TP385
IC3 BU4212F
GND
1
VDD
2
CT
3
VOUT
4
R96
33J
C103
0.1U
TP408
TP371
TP393
C122
NM
C130
NM
C116
NM
C11733P
R89
NM
BR61
33JX4
1234
8765
R71
10KJ
TP383
C110
0.1U
C96
0.1U
R226
NM_10KJ
IC14
NC7WZ17
A1
1
A2
3
Y1
6
Y2
4
GND
2
Vcc
5
TP814
R370
33J
TP391
C79
47P
TP413TP379
R97
33J
C131
NM
C1140.1U
R93
10KJ
IC19
TC74VHC244FT
1A1
2
1A2
4
1A3
6
1A4
8
2A1
11
2A2
13
2A3
15
2A4
17
1G
1
2G
19
1Y1
18
1Y2
16
1Y3
14
1Y4
12
2Y1
9
2Y2
7
2Y3
5
2Y4
3
VCC
20
GND
10
C18
NM
C16
0.1U
TP893
R371
33J
R72
10KJ
IC13
74LCX244
1A1
2
1A2
4
1A3
6
1A4
8
2A1
11
2A2
13
2A3
15
2A4
17
1G
1
2G
19
1Y1
18
1Y2
16
1Y3
14
1Y4
12
2Y1
9
2Y2
7
2Y3
5
2Y4
3
VCC
20
GND
10
TP418TP388
TP410
TP373
R237
10KJ
R98
33J
R345
1KJ
TP405
TP894
A A
B B
C C
D D
E E
44
33
22
11
MC
UP
WB
(Dri
ver
sect
ion
1)(A
L-2
050C
S)
5/16
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 19
PR#
/PR
PR#
PGND
24V
PGND
24V
PGND
5V
VCC3
12V
PGND
VCC3
24V
PGND
24V
INT5V
24V
5V
VCC3
VCC3
5V
VCC3
12V
VCC3
VCC3
VCC3
VCC3
12V
VCC3
12V
12V
12V
5V
VCC3
INT24V
PGND
12V
EN5V
VCC3
VCC3
EN5V
12V
12V
12V
VCC3
EN5V
MC
(2)
BIA
S(2)
TC
(2)
GRIDL
(2)
/MC
(11)
/BIA
S(11)
/TC
(11)
/GRIDL
(11)
MCNT
(3)
/MCNT
(12)
PSFM
(3)
/POFF
(11)
POFF
(1)
MRP
S3
(2)
MRP
S_3
(7)
SHOLD
(11)
/LEND
CPF
S2
(2)
/CPF
S2
(12)
MPF
S(2)
CPF
S1
(2)
RR
S(2)
VFM_24V
(2)VFMCNT_12V
(2)
MRP
S2
(2)
MRP
S1
(2)
HL
(2)
LDEN
PMCLK
PMD
MM_Y2
MM_Y1
FTH
MMD
(2)
MM_Y3
/CPF
S1
(12)
VFMOUT
(12)
HLOUT
(11)
/MPF
S(12)
/VFMCNT
(12)
/RR
S(12)
/PMD
(11)
MRP
S_2
(7)
PMCLK_A
(11)
MM
ref1
(7)
/MMD
(12)
/LDEN
(11)
MRP
S_1
(7)
MM
ref0
(7)
/MMCLK
(12)
MMCLK
(1)
MM
ref2
(7)
PSFMOUT
(12)
PTPUL
SE
(2)
TC
S_AN
(16)
(TC
S_AN)
(1)
FTH
RTH
(1)
THOPEN
(3)
RTH_IN
(12)
/PR
(11)
PR
LCDCONT
(1)
(LCDCONT)
(11)
An
alo
gT
on
ner
Sen
so
rB
uff
er
LC
DC
on
tras
tB
uff
er
TP795
TP451
TP430
TP438R102
1KF
TP458
TP428
R113
300J
R383NM
TP427
D58
RL
S-73
D36
1S
S355
R300
470KJ
C371
NM
TP804
R303
10KJ
TP807
R264
12KF
CP17
0603
SFF150FM/32-2
TP801
TP792
R118
1.2KF
IC25
KID65001AF
1B
1
2B
2
3B
3
4B
4
5B
5
6B
6
7B
7
E8
COM
9
1C
16
2C
15
3C
14
4C
13
5C
12
6C
11
7C
10
R26610KJ
R117
10KJ
TP722
TP463
TP445
R114
100J
R308NM
TP459
D56
CRH01
TP448
R316
NM
D66
NM_KD
S226
213
R301
4.7KJ
TP437
R129
NM
TP474
R387
4.7KJ1/4W<3216>
TP449
Q16
KRC102
S
1
2
3
R123
10KF
Q15
NM_2SB1197K
B
E C
TP452
IC27
KID65503F
1B
1
2B
2
3B
3
4B
4
5B
5
6B
6
7B
7
G8
NC
9
1C
16
2C
15
3C
14
4C
13
5C
12
6C
11
7C
10
R307
7.5KF
TP797
TP784
TP435
R413
NM_10KJ
TP444
C111
0.1U/50V<1608>
TP423
R381
NM
TP436
D52
MTZJ22B
TP446
Q20
KRA119
S
1
2
3
Q18
KRC102S
1
2
3
R304
100J
TP472
TP470
Q3
KRA119
S
1
2
3
R302
10KJ
C113
0.1U
R368
NM
TP424
BR62
1.5KJX4
1 2 3 4
8 7 6 5
R124
4.7KJ
C407
NM
D67
KD
S226
213
Q17
KRC102
S
1
2
3
R414
NM_10KJ
TP455
R388
47KJ
R395
1.5KJ
+ -
IC45A
KIA358F-EL/P
3 21
8 4
TP802
TP723
TP439
IC21
KID65001AF
1B
1
2B
2
3B
3
4B
4
5B
5
6B
6
7B
7
E8
COM
9
1C
16
2C
15
3C
14
4C
13
5C
12
6C
11
7C
10
R382
10KJ
TP805
TP454
D5
1S
S355
C112
22000P
TP420
R106
10KF
D4
1S
S355
R380
NM_1.5KJ
D59
NM_KD
S226
213
R142
NM_10KJ
TP798
D2
NM_KD
S226
213
C379
0.1U
C119
22000P
D55
CRH01
R26810KJ
R418
NM_10KJ
R104
7.5KF
TP475
R115
100J1/4W<3216>
+ -
IC22A
KIA393F
3 21
8 4
C118
0.1U/50V<1608>
Q7
KTA1505
S
TP425
TP450
Q4
KRC102
S
1
2
3
TP434
TP426
R297
47KJ
Q21
KRC102S
1
2
3+ -
IC45B
KIA358F-EL/P
5 67
8 4
+ -
IC17A
KIA393F
3 21
8 4
TP461
CP16
0603
SFF150FM/32-2
TP473
TP440
R389
47KJ
+ -
IC53A
KIA358F-EL/P
3 21
8 4
TP793
TP443
R107
4.3KF
R366
0J
TP460
TP429
TP457
R362
4.7KJ1/4W<3216>
R90
10KJ
R396
1.5KJ
TP799
BR63
1.5KJX4
1 2 3 4
8 7 6 5
+ -
IC22B
KIA393F
5 67
8 4
R339
100J
TP781
Q2
NM_KTA1505
S
TP421
D57
RL
S-73
(G)
(D)
(S)
Q19
2SK3018
C398
0.1U
+ -
IC53B
KIA358F-EL/P
5 67
8 4
TP465
R298
1.5KF
TP803
Q13
2SB1132
B
E C
R394
NM
TP553
TP806
TP433
TP464
R363
47KJ
D60
NM_KD
S226
213
D45
1S
S355
TP789
R26910KJ
TP467
R26510KJ
R105
1KJ
+ -
IC17B
KIA393F
5 67
8 4
R386
4.7KJ1/4W<3216>
TP431
TP453
D1
MA700
TP469
TP441
IC24
KID65503F
1B
1
2B
2
3B
3
4B
4
5B
5
6B
6
7B
7
G8
NC
9
1C
16
2C
15
3C
14
4C
13
5C
12
6C
11
7C
10
R296
10KJ
C305
0.1U
TP447
TP794
R379
NM_1.5KJ
R112
NM_4.7KJ1/4W<3216>
R419
NM_10KJ
TP800
TP456
R27010KJ
R299
100J
Q12
2SB1132
B
E C
D3
KD
S226
213
C312
1U<2012>
R103
1MF
C367
2.2U<2012>
D61
1S
S355
R116
10KJ
Q14
KRC102
S
1
2
3
D51
1S
S355
R378
0J
TP476
R108
NM_47KJ
R3930J
TP466
TP790
TP785
TP432
TP442
TP422
R27110KJ
A A
B B
C C
D D
E E
44
33
22
11
MC
UP
WB
(Dri
ver
sect
ion
2)(A
L-2
050C
S)
6/16
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 20
PGND
PGND
PGND
5V
24V
SCMT5V
5V
5V
PGND
PGND
PGND
PGND
PGND
PGND
PGND
PGND
PGND
24V
SFTMT
24VDu
pMT
PGND
24V
SPFMT
PGND
5V
PGND
24V
24V
SPF
SOL
24V
SCMT
24VDu
pMT
PGND
24V
SPFMT
24V
PGND
24V
SFTMT
24V
SPF
SOL
MM_PH_A
(2)
OUT_A-
(12)
MM_AI0
(2)
MM_PH_B
(2)
MM_BI0
(2)
MM_BI1
(2)
MM_AI1
(2)
OUT_A+
(12)
OUT_B-
(12)
MM
ref0
(6)
MM
ref1
(6)
MM
ref2
(6)
DMT0
(1)
/DMT0
(12)
DMT1
(1)
DMT2
(1)
DMT3
(1)
/DMT1
(12)
/DMT2
(12)
/DMT3
(12)
(TM)
(5)
(TM_)
(5)
MRP
S_1
(6)
MRP
S_2
(6)
MRP
S_3
(6)
OUT_B+
(12)
SFTMT0
(3)
/SFTMT0
(12)
SFTMT1
(3)
SFTMT2
(3)
/SFTMT1
(12)
/SFTMT2
(12)
/SFTMT3
(12)
SFTMT3
(3)
SPMT_0
(11)
(SPFMT0)
(5)
SPMT_2
(11)
(SPFMT2)
(5)
(SPFMT3)
(5)
(SPFMT1)
(5)
SPMT_3
(11)
SPMT_1
(11)
TMA_O
(12)
TMB_O
(12)
/SRVC
(11)
SRVC
(3)
(RSV_
SOL)
(3)
/RSV_SOL
(11)
SPU
S(3)
/SPU
S(11)
Sc
an
ne
rM
oto
rD
riv
er
SP
FM
oto
rD
riv
er
Du
ple
xM
oto
rD
riv
er
Sh
ifte
rM
oto
rD
riv
er
To
nn
er
Mo
tor
Dri
ve
r
RS
PF
So
len
oid
Dri
ve
r
IC33
TD62064AF
I13
NC
4
NC
5
I26
NC
10
I311
NC
12
NC
13
GND
17
O1
2
O2
7
O3
9
O4
16
COM
1
COM
8GND
18
I414
NC
15
R161
620J
C140
0.1U/50V
<1608>
CP6
0603
SFF150FM/32-2
C143
0.1U/50V<1608>
R162
1.2KJ
R145
1.5KJ
TP482
TP502
R163
100J
R143
0.68J1W
R159
1.2KJ
C133
820P
TP505
TP489
R146
1.5KJ
R148
30KJ
TP492
Q23
2SD1781K
C138
0.1U
R144
0.68J1W
C135
820P
R147
1KJ
IC31
TD62064AF
I13
NC
4
NC
5
I26
NC
10
I311
NC
12
NC
13
GND
17
O1
2
O2
7
O3
9
O4
16
COM
1
COM
8GND
18
I414
NC
15
R149
30KJ
C134
820P
TP497
R407
10KJ
C136
820P
BR66
10KJX4
1234
8765
IC36
TA7291A
S
Vcc
2
IN1
9
IN2
1
GND
5OUT2
3
OUT1
7
Vref
8
Vs
6
N.C
4
R275
NM_1.2KJ
TP479
+C139
47U/35V
TP481
D8
MTZJ22B
R152
510J
C141
0.1U
TP484
CP1
0603
SFF150FM/32-2
TP503
D41
1S
S355
R157
1J2W
R151
1KJ
C137
0.1U
R408
10KJ
R150
2KJ
TP506
CP2
0603
SFF150FM/32-2
IC34
STA7100MOUTA
1
OUTA
2
OUTA/
3
OUTA/
4
Vs
13
OUTB
17
OUTB
18
OUTB/
15
OUTB/
16
GND
10
INA
8
INA/
7
INB
11
INB/
12
REF
9
Se
nseA
5
Se
nseB
14
Syn
c6
TP478
TP494
R403
1.2KJ
TP488
+C142
10U/35V
TP501
Q24
2SD1781K
TP499
C145
0.1U/50V<1608>
CP5
0603
SFF150FM/32-2
TP480
R312
0J<1608>
IC32
L6219D
S
OUT2A
2
SEN
SE2
3
COMP2
4
OUT2B
5
GND
6
GND
7
I02
8
I12
9
PHA
SE2
10
VREF2
11
RC2
12
VS
S13
RC1
14
VREF1
15
PHA
SE1
16
I11
17
GND
18
GND
19
I01
20
OUT1B
21
COMP1
22
SEN
SE1
23
VS
24
OUT1A
1
R164
4.7KJ
D42
1S
S355
C144
NM_10U/10V<2012>
R160
300J
TP485
TP487
TP504
R404
1.2KJ
Q25
NM_2
SD1781K
R158
1J2W
R406
NM_10KJ
TP491
CP3
0603
SFF150FM/32-2
D43
1S
S355
TP496
R309
NM_0J<1608>
D9
MTZJ22B
TP483
TP477
A A
B B
C C
D D
E E
44
33
22
11
MC
UP
WB
(Dri
ver
sect
ion
3)(A
L-2
050C
S)
7/16
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 21
5V
5V 5V
VC
C3
24V
PG
ND
INT
24V
INT
5V
EN
5V
VC
C3
5V 5V
VC
C3
5VV
CC
3
12V
VC
C3
VC
C3
5VINT
24V
PG
ND
PG
ND
VC
C3
VC
C3
SR
JD(1
1)
PO
D(1
2)P
MR
DY
(11)
(SC
OD
)(3
)
(SR
JD)
(3)
(PO
D)
(3)
(PM
RD
Y)
(3)
TC
S(1
6)
MM
LD(1
2)
DV
S1
(3)
(MM
LD)
(3)
(TC
S)
(3)
(MF
D)
(3)
DR
ST
(11)
PS
W(1
1)S
PP
D(1
1)
(PP
D3)
(3)
3.3V
IN(1
1)
DV
SE
L(1
6)
(SP
ID)
(3)
(PP
D2)
(3)
(DR
ST
)(3
)
(SP
PD
)(1
)
(CE
D1)
(3)
CE
D2
(12)
(PS
W)
(1)
PP
D1
(12)
CE
D1
(12)
(CE
D2)
(3)
PP
D2
(12)
(PP
D1)
(3)
PD
1(1
2)P
D2
(12)
(PD
1)(3
)(P
D2)
(3)
SC
OD
(11)
PP
D3
(12)
12V
IN(1
1)
DS
WS
(3)
24V
1(D
SW
S)
(12)
(FA
NLK
)(3
)F
AN
LK(1
2)
SP
ID(1
1)
MF
D(1
2)
(PS
FA
NLK
)(1
)P
SF
AN
LK(1
2)
R18
41K
J
R19
015
KJ
R19
710
J
TP
831
R21
212
KJ
C16
4
0.1U
C19
6
0.1U
/50V
<16
08>
R20
40J
R19
14.
7KJ
R12
510
0KJ
D15
KD
S22
6
213
R21
33.
3KJ
R34
04.
7KJ
TP
508
C18
1
1000
P
C18
6
1000
P
R17
04.
7KJ
D16
KD
S22
6
213
R19
610
J
C16
5
0.1U
R30
510
0J
R20
94.
7KJ
TP
509
C18
7
1000
P
C37
2
1000
P
C17
5
1000
P
TP
517
1
D17
KD
S22
6
213
R17
5
0.22
J 2W
R37
74.
7KJ
R21
04.
7KJ
C16
6
0.1U
C18
8
1000
P
R12
810
0KJ
C18
0
1000
P
C19
9
1000
P
R20
610
0J 2
W
TP
516
1
C14
6
0.1U
C18
9
1000
P
C16
7
0.1U
FB
5N
M_0
J <
1608
>
C18
3
1000
P
C20
2
1000
P
C18
5
1000
P
R21
41K
J
C38
0
1000
P
D63
UDZS3.9B
C20
3
1000
P
C16
8
0.1U
D54
KD
S22
6
213
D21
KD
S22
6
213
TP
510
D10
KD
S22
6
213
R21
51K
J
R18
72.
7KJ
+C
204
22U
/16V
D25
1SS
355
C20
0
1000
P
C14
7
NM
D13
KD
S22
6
213
D22
KD
S22
6
213
IC37
KIA
7805
IN1
GN
D
2
OU
T3
D11
KD
S22
6
213
C18
4
1000
P
C17
4
1000
P
C16
9
0.1U
R21
61K
J
C20
6
0.1U
C20
1
1000
P
D18
KD
S22
6
213
D23
KD
S22
6
213
D12
KD
S22
6
213
R37
21K
J
C20
7
0.1U
R19
410
J
R21
71K
J
C17
0
NM
D24
KD
S22
6
213
R16
815
KJ
R17
24.
7KJ
C14
8
0.1U
+C
205
22U
/16V
C19
3
0.1U
R13
010
0KJ
R19
210
J
R21
81K
J
TP
511
R16
715
KJ
C15
7
NM
+C
192
47U
/35V
R19
81K
J
R21
91K
J
C19
7
0.1U
C17
2
1000
P
R19
91K
J
C14
9
0.1U
C15
8
NM
C17
8
1000
P
D20
KD
S22
6
213
C17
1
1000
P
L5 ZJS
R51
01-2
23T
A
R30
610
0J
R20
20J
R22
01K
J
R17
14.
7KJ
D14
1SS
355
R20
01K
J
C15
9
NM
R21
14.
7KJ
+C
195
22U
/16V
C15
1
NM T
P51
2
R20
11K
J
C15
0
NM
C16
0
0.1U
D37
KD
S22
6
213
C15
2
NM
R20
30J
C18
2
1000
P
C19
8
1000
P
R17
61K
J
C16
1
0.1U
TP
830
R18
520
KJ
D30
KD
S22
6
213
C15
3
NM
R12
610
0KJ
R20
715
KJ
R18
31K
J
D19 1S
S35
5
C17
7
1000
P
R17
71K
J
D31
KD
S22
6
213
TP
513
C15
4
NM
TP
518
1
D28
KD
S22
6
213
R17
81K
J
C17
3
1000
P
+C
194
47U
/25V
+C
190
47U
/35V
D26
KD
S22
6
213
R19
310
J
R17
91K
J 2W
R17
44.
7KJ
C15
5
NM
R18
01K
J
C19
1
0.1U
/50V
<16
08>
D29
KD
S22
6
213
L4 NM
_ZJS
R51
01-2
23T
A
R16
915
KJ D
32
KD
S22
6
213
C15
6
NM
R20
50J
C17
9
0.1U
D27
KD
S22
6
213
R18
11K
J
TP
514
C16
2
0.1U
C17
6
1000
P
R18
81K
J
FB
40J
<16
08>
R12
710
0KJ
R18
21K
J
R19
510
J
R17
315
KJ
R18
91K
J
D62
UDZS3.9B
C16
3
0.1U
R36
71K
J
R20
815
KJ
TP
515
1
R18
620
KJ
A A
B B
C C
D D
E E
44
33
22
11
MC
U P
WB
(N
ois
e fi
lter
/Pu
ll-u
p s
ecti
on
) (A
L-2
050C
S)
8/16
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 22
_SDRAM_CLK
SDRAM_DATA0
SDRAM_DATA5
_SDRAM_DQMA0
_SDRAM_CKE
ROM_C
S_L
SDRAM_DQMA1
SDRAM_DATA11
_SDRAM_DQMB1
SDRAM_DATA10
SDRAM_RA
S_L
SDRAM_CKE
XOUT
SDRAM_DATA6
SDRAM_CA
S_L
SDRAM_DATA15
SDRAM_DATA9
SDRAM_C
S0_L
SDRAM_CA
S_L
ROM_C
S_L
_SDRAM_DQMA1
_SDRAM_DQMA1
_SDRAM_DQMB0
SDRAM_DQMB0
SDRAM_WE_L
SDRAM_DQMA0
_SDRAM_DQMA0
SDRAM_BANK0
SDRAM_DATA8
SDRAM_DATA12
SDRAM_DATA14
SDRAM_DATA3
SDRAM_DATA2
SDRAM_DATA4
SDRAM_DATA7
SDRAM_DATA13
SDRAM_BANK1
SDRAM_DQMB1
_SDRAM_C
S0_L
SDRAM_DATA1
TR
ST_L
TCK
TM
S
SDRAM_RA
S_L
SDRAM_WE_L
SDRAM_RA
S_L
SDRAM_CA
S_L
_SDRAM_DQMA0
_SDRAM_C
S0_L
SDRAM_WE_L
_SDRAM_CKE
TDI
CLK_EXT
PB_ADDR3
PB_ADDR0
PB_ADDR6
PB_ADDR1
PB_ADDR4
PB_ADDR7
PB_ADDR5
PB_ADDR2
RY_BY
TDO
PB_DATA4
PB_DATA1
PB_DATA0
PB_DATA5
PB_DATA6
PB_DATA7
PB_DATA2
PB_DATA3
TR
ST_L
TDI
TM
S
TCK
TDO
PIDATA1
PIDATA0
PIDATA2
PIDATA4
RY_BY
PIDATA6
PIDATA7
PIDATA3
PIDATA5
SDRAM_ADDR12
SDRAM_ADDR11
SDRAM_ADDR6
SDRAM_ADDR3
SDRAM_ADDR8
SDRAM_ADDR12
SDRAM_ADDR4
SDRAM_ADDR0
SDRAM_ADDR0
SDRAM_ADDR1
SDRAM_ADDR2
SDRAM_ADDR9
SDRAM_ADDR9
SDRAM_ADDR7
SDRAM_ADDR2
SDRAM_ADDR5
SDRAM_ADDR5
SDRAM_ADDR3
SDRAM_ADDR6
SDRAM_ADDR10
SDRAM_ADDR7
SDRAM_ADDR11
SDRAM_ADDR4
SDRAM_ADDR8
SDRAM_ADDR10
SDRAM_ADDR1
_SDRAM_CKE
_SDRAM_C
S0_L
_SDRAM_DQMA1
/FPOFF
/FPOFF
_SDRAM_DQMB1
SDRAM_BANK0
SDRAM_BANK1
_SDRAM_DATA0
_SDRAM_DATA1
_SDRAM_DATA2
_SDRAM_DATA4
_SDRAM_DATA5
_SDRAM_DATA6
_SDRAM_DATA7
_SDRAM_DATA8
_SDRAM_DATA9
_SDRAM_DATA10
_SDRAM_DATA11
_SDRAM_DATA12
_SDRAM_DATA13
_SDRAM_DATA14
_SDRAM_DATA15
_SDRAM_CLK
_SDRAM_CLK
_SDRAM_DATA3
PODATA4
PODATA5
PODATA7
PODATA6
PODATA3
PODATA2
PODATA1
PODATA0
_SDRAM_DQMB0
SDRAM_ADDR0
SDRAM_ADDR1
SDRAM_ADDR2
SDRAM_ADDR3
SDRAM_ADDR4
SDRAM_ADDR5
SDRAM_ADDR6
SDRAM_ADDR7
SDRAM_ADDR8
SDRAM_ADDR9
SDRAM_ADDR10
SDRAM_ADDR11
SDRAM_ADDR12
SDRAM_BANK0
SDRAM_BANK1
RY_BY
XIN
_SDRAM_DATA3
_SDRAM_DATA1
_SDRAM_DATA7
SDRAM_ADDR5
SDRAM_ADDR6
SDRAM_ADDR8
SDRAM_ADDR9
SDRAM_ADDR11
SDRAM_ADDR12
SDRAM_BANK0
SDRAM_BANK1
_SDRAM_DATA10
_SDRAM_DATA9
_SDRAM_DATA12
_SDRAM_DATA7
_SDRAM_DATA5
_SDRAM_DATA0
SDRAM_RA
S_L
SDRAM_CA
S_L
_SDRAM_CLK
_SDRAM_CLK
_SDRAM_DQMA0
SDRAM_ADDR10
SDRAM_ADDR7
SDRAM_ADDR3 _SDRAM_C
S1A_L
SDRAM_WE_L
SDRAM_ADDR1
SDRAM_ADDR0 _SDRAM_CKE
_SDRAM_DQMA1
SDRAM_ADDR2
SDRAM_ADDR4
_SDRAM_DATA2
_SDRAM_DATA6
_SDRAM_DATA14
_SDRAM_DATA6
_SDRAM_DATA3
_SDRAM_DATA0
_SDRAM_DATA2
_SDRAM_DATA10
_SDRAM_DATA5
_SDRAM_DATA1
_SDRAM_DATA1
_SDRAM_DATA6
_SDRAM_DATA15
_SDRAM_DATA10
_SDRAM_DATA4
_SDRAM_DATA4
_SDRAM_DATA7
_SDRAM_DATA11
_SDRAM_DATA0
_SDRAM_DATA7
_SDRAM_DATA8
_SDRAM_DATA12
_SDRAM_DATA0
_SDRAM_DATA8
_SDRAM_DATA3
_SDRAM_DATA14
_SDRAM_DATA12
_SDRAM_DATA9
_SDRAM_DATA13
_SDRAM_DATA5
_SDRAM_DATA15
_SDRAM_DATA1
_SDRAM_DATA9
_SDRAM_DATA3
_SDRAM_DATA5
_SDRAM_DATA6
_SDRAM_DATA8
_SDRAM_DATA11
_SDRAM_DATA11
_SDRAM_DATA2
_SDRAM_DATA4
_SDRAM_DATA2
_SDRAM_DATA8
_SDRAM_DATA15
_SDRAM_DATA14
_SDRAM_DATA13
_SDRAM_DATA13
_SDRAM_DATA4
_SDRAM_C
S1A_L
SDRAM_C
S1A_L
_SDRAM_C
S1A_L
VCC3
OA3
.3V
OA3.3V
OA3.3V
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
OA3
.3V
VCC3
VCC3
VCC3
/POACK
(2)
_SDRAM_CLK
CLK_EXT
_SDRAM_CLK
/POREQ
(2)
/SC_LINE
(2)
CLK_EXT
ES_CMD
(1)
ES_
ST
S(1)
DT_REQB
(10)
DT_ACKB
(10)
PB_DATA[7:0]
(10,13)
PB_NC
S1
(13)
PB_ADDR[7:0]
(10,13)
PB_NC
S3
(10)
PB_NAE0
(5,10)
PB_NOE
(5,10)
PB_NWE
(5,10)
/PR_LINE
(2)
/ES_PAGE
(1)
/IMC_READY
(2)
SDRAM_BANK[1:0]
_SDRAM_DATA[15:0]
SDRAM_BANK[1:0]
_SDRAM_DATA[15:0]
SDRAM_ADDR[12:0]
_SDRAM_DATA[15:0]
SDRAM_BANK[1:0]
/ES_CRDY
(3)
INT_U
SBD
(10)
WAKEUP
(10)
SU
SPEND(U
SB2
.0)
(10)
(FW)
(1,5)
SDRAM_ADDR[12:0]
/H_SYNC
(2)
PODATA[7
..0]
(2)
MDM_IRQ
(13)
PIDATA[7
..0]
(2)
/PIREQ
(2)
/PIACK
(2)
/PIWR
(2)
SDRAM_ADDR[12:0]
SDRAM_ADDR[12:0]
TCK
(12)
TM
S(12)
TDI
(12)
/FPOFF
(2)
MODEM_IN
(13)
/RE
SET0
(2,4,5,12)
OA_TX
(12)
OA_RX
(12)
TDO
(12)
VPP
(4)
/ES_
SRDY
(1)
/OP_R
ST
(5,10) /RE
S_OA982
(1)
/RE
SET0
(2,4,5,12)
OA982_READY
(12)
TR
ST_L
(12)
_SDRAM_DATA[15:0]
_SDRAM_CLK
SDRAM_ADDR[12:0]
_SDRAM_DATA[15:0]
SDRAM_BANK[1:0]
8M/16MFla
shROM
TP769
TP567
TP523
C236
0.1U
C265
NM
TP580
C264
0.1U
TP617
R137
33J
FB6
0J<1608>
TP590
R235
33J
BR67
100JX4
1 2 3 45678
C38312PTP911
TP765
TP749
TP573
C227
0.1U
TP733
TP655
TP632
TP613
C237
0.1U
TP524
R233NM
TP761
TP538
C301
0.1U
C303
NM
TP774
TP552
TP779
TP566
TP756
TP607
TP902
TP753
R247
4.7KJ
C209
0.1U
BR76
33JX4
1 2 3 45678
TP663
L6NM_ZJSR5101-223TA
R346
10KJ
TP605
TP595
TP559
C38412P
TP577
TP624
TP600
TP796
TP533
BR77
33JX4
1 2 3 45678
R23110KJ
TP653
TP809
TP659
TP591
BR75
33JX4
1 2 3 45678
R250
4.7KJ
C228
0.1U
C225
0.1U
TP620
R138
NM
TP768
TP532
TP525
R225
33J
BR82
10KJX4
1 2 3 45678
IC40
HY57V561620FTP-H-C
VS
S54
RA
S18
WE
16
CA
S17
VS
S41
VS
S28
VDD
1VDD
14
VDD
27
BA0
20
BA1
21
A0
23
A1
24
A2
25
A3
26
A4
29
A5
30
A6
31
A7
32
A8
33
A9
34
A10
22
A11
35
VDDQ
3VDDQ
9VDDQ
43
VDDQ
49
VS
SQ
6V
SSQ
12
VS
SQ
46
VS
SQ
52
DQ0
2
DQ1
4
DQ2
5
DQ3
7
DQ4
8
DQ5
10
DQ6
11
DQ7
13
DQ8
42
DQ9
44
DQ10
45
DQ11
47
DQ12
48
DQ13
50
DQ14
51
DQ15
53
LDQM
15
UDQM
39
CS
19
CLK
38
CKE
37
A12
36
N.C
40
TP773
TP585
TP546
IC44
HY57V561620FTP-H-C
VS
S54
RA
S18
WE
16
CA
S17
VS
S41
VS
S28
VDD
1VDD
14
VDD
27
BA0
20
BA1
21
A0
23
A1
24
A2
25
A3
26
A4
29
A5
30
A6
31
A7
32
A8
33
A9
34
A10
22
A11
35
VDDQ
3VDDQ
9VDDQ
43
VDDQ
49
VS
SQ
6V
SSQ
12
VS
SQ
46
VS
SQ
52
DQ0
2
DQ1
4
DQ2
5
DQ3
7
DQ4
8
DQ5
10
DQ6
11
DQ7
13
DQ8
42
DQ9
44
DQ10
45
DQ11
47
DQ12
48
DQ13
50
DQ14
51
DQ15
53
LDQM
15
UDQM
39
CS
19
CLK
38
CKE
37
A12
36
N.C
40
TP759
TP582
C242
0.1U
R343
NM_0J
TP645
TP618
R369
NM
TP791
TP780
TP667
C38512P
C248
0.1U
TP925
TP575
TP750
TP592
TP561
TP633
TP614
R239
10KJ
R238
10KJ
C211
NM
C247
0.1U
R227
33J
C249
0.1U
C224
0.1U
TP568
TP930
TP629
TP609
TP787
TP526
TP519
C230
0.1U
C250
0.1U
TP764
TP540 C241
0.1U
R234
33J
TP554
TP664
R232
NM
TP772
TP570
TP560
C38612P
TP926
TP625
TP602
C220
0.1U
TP910
TP597
TP535
TP579
TP654
C299
0.1U
TP660
C219
0.1U
C239
NM
C213
1U<2012>
TP778
TP754
TP728
TP642
TP551
C252
33P
TP621
TP593
TP608
TP527
C235
0.1U
C223
0.1U
R248
4.7KJ
TP757
TP650
TP549
TP901
TP808
TP767
TP656
TP584
R228
33J
TP587
TP668
TP646
TP638
R245
NM
C226
0.1U
TP520
TP547
C215
1U<2012>
TP534
TP762
TP730
TP548
TP563
TP576
TP545
C240
0.1U
TP634
TP615
TP788
R222
33J
R342
4.7KJ
TP601
TP543
C36212P
TP771
TP751
TP569
TP611
TP541
C246
0.1U
BR78
33JX4
1 2 3 45678
C244
0.1U
C216
NM
C100
1000P
C222
0.1U
R246
NM
R229
33J
R236
4.7KJ
TP665
TP539
C253
47P
BR69
100JX4
1 2 3 45678
C395
10U/10V<2012>
TP562
BR81
33JX4
1 2 3 4
8 7 6 5
R249
0J
TP626
TP604
TP572
TP528
TP537
TP760
TP542
R221
NM
TP556
TP661
BR80
33JX4
1 2 3 4
8 7 6 5
C300
0.1U
TP643
C21022000P
R240
10KJ
C36612P
TP599
TP622
TP596
TP912
TP610
TP581
TP529
C251
NM
TP731
TP651
C221
0.1U
TP657
TP586
BR72
33JX4
1 2 3 45678
R243
10KJ
C238
0.1U
TP647
TP639
C218
0.1U
R351
10KJ
C302
0.1U
BR68
100JX4
1 2 3 45678
C214
0.01U
R230NM
TP521
C243
0.1U
TP766
TP565
C245
0.1U
R241
10KJ
X4AT-49(18
.3856MHz)
TP909
TP770
TP755
TP588
TP578
BR71
33JX4
1 2 3 45678
C231
0.1U
C256
0.1U
TP745
TP616
C217
10U/10V<2012>
TP522
C234
0.1U
C396
10U/10V<2012>
TP777
TP536
R242
10KJ
C38112PTP550
IC38
OA-982
GP_C0/PB_ADDR0
199
GP_C1/PB_ADDR1
201
GP_C2/PB_ADDR2
202
GP_C3/PB_ADDR3
203
GP_C4/PB_ADDR4
204
GP_C5/PB_ADDR5
205
GP_C6/PB_ADDR6
207
GP_C7/PB_ADDR7
208
REG_A9/PB_NC
S1
178
REG_A8/PB_NC
S2
180
GP_A1
26
GP_A2/DC_CHY1
28
GP_A3/DC_CHX1
29
GP_A4/DC_PWM1
30
GP_A5/DC_CHY0
31
GP_A6/DC_CHX0
32
GP_A0
24
GP_A7/DC_PWM0
34
GP_B0/U
SART0_TX
1
GP_B1/U
SART0_RX
2
GP_B2/U
SART0_CK
8
GP_B3/ANA_
SD1
9
GP_B4/DT_ACKB
11
GP_B5/DT_REQB
12
GP_B6/DT_ACKA
13
GP_B7/DT_REQA
14
GP_D0/ADC_A0
15
GP_D1/ADC_A1
16
GP_D2/ADC_A2
19
GP_D3/ADC_CLK
21
REG_AD0/PB_DATA0
189
REG_AD1/PB_DATA1
188
REG_AD2/PB_DATA2
187
REG_AD3/PB_DATA3
186
REG_AD4/PB_DATA4
185
REG_AD5/PB_DATA5
183
REG_AD6/PB_DATA6
182
REG_AD7/PB_DATA7
181
REG_ADDR_VALID/PB_NC
S0
190
REG_RD_L/PB_NC
S3
194
REG_WR_L/PB_NAE0
195
REG_C
S_L/PB_NAE1
196
REG_RDY/PB_NWE
197
VS
S_CORE
191
VS
S_IO
150
VS
S_CORE
173
VS
S_IO
136
VS
S_CORE
121
VS
S_IO
123
VS
S_CORE
139
VS
S_CORE
87
VS
S_IO
108
VS
S_CORE
69
VS
S_IO
98
VS
S_CORE
35
VS
S_IO
86
VS
S_CORE
17
VS
S_IO
76
VS
S_IO
64
VS
S_IO
54
VS
S_IO
206
VS
S_IO
41
VS
S_IO
193
VS
S_IO
27
VS
S_IO
10
VS
S_IO
179
VS
S_IO
164
INTERRUPT_L/PB_NOE
198
RE
SET_L
112
TCK
114
TM
S116
TDI
117
TDO
113
BA
SE_CLK/GP_PWM1
168
MAIN_CLK/GP_PWM0
170
CLK_EXT/GP_PWM2
169
TE
ST_MODE0
172
XIN
5
XOUT
4
PP_HIDRIVE/U
SART1_RX
143
PP_DRIVE/U
SART1_TX
145
PP_NINIT
146
PP_NFAULT
147
PP_N
SELECTIN
151
PP_NAUTOFD
152
PP_SELECT
153
PP_PERROR
154
PP_BU
SY
155
PP_NACK
156
PP_DATA7
157
PP_DATA6
159
PP_DATA5
160
PP_DATA4
161
PP_DATA3
162
PP_DATA2
163
PP_DATA1/U
SART1_CK
165
PP_DATA0
166
PP_N
STROBE
167
PO_LINE_SYNC/ANA_SCLK
37
PO_PAGE_
SYNC/ANA_NC
S38
PO_REQ/ANA_
SD0
39
PO_ACK/PDATA0/PD
S0
40
PO_DONE/PDATA2/PD
S2
42
PO_WR/PDATA1/PD
S1
43
PO_DATA7/LHEAT/PA
S_M
44
PO_DATA6/LCTRL/CFIRE2
45
PO_DATA5/AGATE/CFIRE1
47
PO_DATA4/ACLK/MFIRE2
48
PO_DATA3/PENABLE/MFIRE1
49
PO_DATA2/PLOAD
50
PO_DATA1/PCLK
51
PO_DATA0/PDATA3/PA
S_C
52
PI_LINE_SYNC/GP_D6
119
PI_TR_TGEN
120
PI_TGEN6
124
PI_TGEN5
125
PI_TGEN4
126
PI_TGEN3
127
PI_TGEN2
128
PI_TGEN1
129
PI_TGEN0
131
PI_DATA7
132
PI_DATA6
133
PI_DATA5
134
PI_DATA4
135
PI_DATA3
137
PI_DATA2
138
PI_DATA1
141
PI_DATA0
142
SDRAM_DATA15
53
SDRAM_DATA14
55
SDRAM_DATA13
56
SDRAM_DATA12
57
SDRAM_DATA11
58
SDRAM_DATA10
60
SDRAM_DATA9
61
SDRAM_DATA8
62
SDRAM_DATA7
63
SDRAM_DATA6
65
SDRAM_DATA5
66
SDRAM_DATA4
67
SDRAM_DATA3
68
SDRAM_DATA2
72
SDRAM_DATA1
73
SDRAM_DATA0
74
ROM_C
S_L
75
SDRAM_C
S1B_L
77
SDRAM_CKE
78
SDRAM_CLK
79
SDRAM_ADDR11
82
SDRAM_BANK1
83
SDRAM_BANK0
84
SDRAM_ADDR10
85
SDRAM_ADDR9
89
SDRAM_ADDR8
90
SDRAM_ADDR7
91
SDRAM_ADDR6
92
SDRAM_ADDR5
94
SDRAM_ADDR4
95
SDRAM_ADDR3
96
SDRAM_ADDR2
97
SDRAM_ADDR1
99
SDRAM_ADDR0
100
SDRAM_RA
S_L
101
SDRAM_C
S1A_L
102
SDRAM_C
S0_L
104
SDRAM_DQMB1
105
SDRAM_DQMA1
106
SDRAM_DQMB0
107
SDRAM_DQMA0
109
SDRAM_CA
S_L
110
SDRAM_WE_L
111
VDD_IO
144
VDD_CORE
192
VDD_IO
130
VDD_CORE
174
VDD_IO
115
VDD_CORE
140
VDD_IO
103
VDD_CORE
122
VDD_IO
93
VDD_CORE
88
VDD_IO
81
VDD_CORE
70
VDD_IO
71
VDD_CORE
36
VDD_IO
59
VDD_CORE
18
VDD_IO
46
VDD_IO
200
VDD_IO
33
VDD_IO
184
VDD_IO
20
VDD_IO
171
VDD_IO
3
VDD_IO
158
PLLC
S_VDDA
7
PLLC
S_V
SSA
6
SDRAM_ADDR12
80
USB_DP
176
USB_DM
175
PLLS
S_VDDA
149
PLLS
S_V
SSA
148
TE
ST_MODE1
177
TR
ST_L
118
GP_D4/ADC_DATA
22
GP_D5/ADC_NC
S23
VDD_IO
25
TP748
IC39
GND
27
GND
46
VCC
37
IO0
29
IO1
31
IO2
33
IO3
35
IO4
38
IO5
40
IO6
42
IO7
44
IO8
30
IO9
32
IO10
34
IO11
36
IO12
39
IO13
41
IO14
43
IO15/A-1
45
A0
25
A1
24
A2
23
A3
22
A4
21
A5
20
A6
19
A7
18
A8
8
A9
7
A10
6
A11
5
A12
4
A13
3
A14
2
A15
1
A16
48
A17
17
A18
16
VCCW
13
WE
11
RE
SET
12
BYTE
47
CE
26
OE
28
RY/BY
15
A19
9
A20
10
WP/ACC
14
TP571
C212
0.01U
TP631
TP612
TP810
R244
NM_10KJ
BR73
33JX4
1 2 3 45678
TP758
TP752
BR74
33JX4
1 2 3 45678
TP564
TP776
TP732
TP594
TP606
TP557
BR70
100JX4
1 2 3 45678
C263
0.1U
TP666
C233
0.1U
TP574
TP662
BR79
33JX4
1 2 3 45678
TP644
C254
33P
BR83
10KJX4
1 2 3 45678
C38212P
R390
33J
TP669
TP623
TP598
C208
NM
TP530
TP531
TP544
TP652
BR84
10KJX4
1 2 3 45678
TP583
TP558
TP658
TP589
C397
10U/10V<2012>
TP763
TP603
TP648
TP640
TP775
TP744
TP619
C229
0.1U
C232
0.1U
BR85
10KJX4
1 2 3 45678
A A
B B
C C
D D
E E
44
33
22
11
MC
UP
WB
(IM
C2
sect
ion
1/2)
(AL
-205
0CS
)9/
16
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 23
PB_NOE
PB_ADDR0
PB_ADDR5
PB_ADDR1
PB_ADDR2
PB_ADDR3
PB_DATA1
PB_DATA0
PB_DATA0
PB_DATA4
PB_DATA4
PB_DATA3
PB_DATA1
PB_DATA7
PB_DATA6
PB_DATA5
PB_DATA3
PB_DATA5
PB_DATA2
PB_DATA7
PB_DATA6
PB_DATA2
PB_ADDR4
PB_ADDR6
PB_ADDR7
PB_NWE
PB_NOE
PB_NWE
FG
ISP33
VCC3
ISP33
VCC3
VCC3
VCC3
VCC3
ISP33
FG
VCC3
VCC3
VCC3
VCC3
VCC3
VCC3
PB_DATA[7:0]
(9,13)
PB_NWE
(5,9)
DT_REQB
(9)
PB_DATA[7:0](9,13)
DT_ACKB
(9)
INT_U
SBD
(9)
PB_NC
S3
(9)
PB_NOE
(5,9)
PB_ADDR[7:0](9,13)
PB_NAE0
(5,9)
/OP_R
ST
(5,9) /RE
S_U
SB20
(1)
SU
SPEND(U
SB2
.0)
(9)
WAKEUP
(9)
DT_ACKB
(9)
GND
GND
GND
USB2.0
DEV1
L130J<1608>
CN1 UBR23-4K2200
-D2
+D
3
SHIELD
5
GND
4
+5V
1
R258
10KJ
C269
0.1U
C404
1U<2012>
TP693
C272
15P
C410
0.1U
TP683
C261
10U/10V<2012>
TP871
IC41
ISP1583B
S
AGND
1
RPU
2
DP
3
DM
4
AGND
5
RREF
6
RE
SET_N
7
EOT
8
DREQ
9
DACK
10
DIOR
11
DIOW
12
DGND
13
INTRQ
14
READY/IORDY
15
INT
16
DA217
CS_N18
RW_N/RD_N19
DS_N/WR_N20
CS0_N21
CS1_N22
AD023
AD124
AD225
VCC(I/O)26
AD327
AD428
AD529
AD630
AD731
VCC1V832
N.C
.33
MODE1
34
DGND
35
ALE/A0
36
DATA0
37
DATA1
38
DATA2
39
DATA3
40
VCC(I/O)
41
DATA4
42
DATA5
43
DATA6
44
DATA7
45
DATA8
46
DATA9
47
DATA10
48
DATA1149
DATA1250
DATA1351
DATA1452
DATA1553
VCC(I/O)54
VBUS55
VCC1V856
XTAL257
XTAL158
DGND59
MODE0/DA160
VCC(3V3)61
BUS_CONF/DA062
WAKEUP63
SUSPEND64
DGNDDIE
R272
12KF
TP704
R259
NM
R139
33J
IC183
TC7
SH126FU
42
1
5 3
TP675
TP677
L7
BLM21PG600
SN1
L9
BLM21PG600
SN1
TP705
TP880
C267
0.1U
R310
NM
R399
100KJ
TP688
TP690
C258
0.01U
TP701
TP686
R257
10KJ
R274
0J
IC43
TC7
SH04FU
24 1
35
C260
0.01U
TP702
TP681
C270
0.1U
C273
18P
TP692
R267
NM_<1608>
C271
0.1U
C262
0.1U
TP682
C266
0.1U
R256
10KJ
TP707
TP706
TP870
TP700
IC42
TC7
SH08FU
1 2 3
4
5
R254
NM
TP703
TP699
C101
1000P
TP709
TP697
R260
10KJ
L8
DLW21
SN900
SQ2
C268
0.1U
TP782
TP696
R40010KJ
TP708
C4030.1U
X6
AT-49(12MHz)
C257
0.01U
L110J<1608>
TP695
C259
0.01U
R261
10KJ
TP907
R111
1MF
TP783
R25210KJ
R40110KJ
R25510KJ
TP908
TP670
C408
0.1U
C4050.1U
R262
1.5KJ
TP694
TP689
TP687
C409
0.1U
TP691
R25110KJ
C406
10U/10V<2012>
TP698
C3700.1U
TP684
R253
1.2KJ
C274
0.01U
TP685
R273
NM
A A
B B
C C
D D
E E
44
33
22
11
MC
UP
WB
(IM
C2
US
B2.
0se
ctio
n2/
2)(A
L-2
050C
S)
10/1
6
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 24
5VE
N5V
24V
PG
ND
PG
ND
INT
24V
5V
INT
5V
24V
5VE
N5V
PG
ND
EN
5V5V
VC
C3
5V5V
24V
SP
FM
T
INT
5V
5V
24V
PG
ND
24V
SP
FM
T
5V
5V
24V
SP
FS
OL
/BIA
S(6
)
KE
YIN
(3)
/TC
(6)
/PO
FF
(6)
HLO
UT
(6)
3.3V
IN(8
)
/PR
(6)
FW
(5)
/GR
IDL
(6)
(OP
_CLK
)(5
)
(LC
DD
B6)
(OP
_LA
TC
H)
(5)
12V
IN(8
)
/MC
(6)
DR
ST
(8)
PS
W(8
)
(KE
YS
C1)
(5)
(KE
YS
C2)
(5)
(SE
LIN
1)
(KE
YS
C3)
(5)
(SE
LIN
2)
(LC
DD
B7)
(LC
DD
B5)
(LC
DD
B4)
(LC
DR
S)
BZ
R(1
)
(LC
DE
)
(SE
LIN
3)
INF
OLE
D(3
)
(LC
DC
ON
T)
(6)
SP
MT
_0(7
)S
PM
T_2
(7)
SP
PD
(8)
SP
ID(8
)S
PM
T_3
(7)
SP
MT
_1(7
)
PS
L(3
)
/VID
EO
(5)
SH
OLD
(6)
/SY
NC
(5)
/LD
EN
(6)
PM
CLK
_A(6
)P
MR
DY
(8)
/PM
D(6
)
LCD
RS
#(5
)(L
CD
RS
)
LCD
E#
(5)
(LC
DE
)
LCD
DB
4#(5
)(L
CD
DB
4)
LCD
DB
5#(5
)(L
CD
DB
5)
LCD
DB
6#(5
)(L
CD
DB
6)
LCD
DB
7#(5
)(L
CD
DB
7)
SE
LIN
3(3
)(S
ELI
N3)
SE
LIN
2(3
)(S
ELI
N2)
SE
LIN
1(3
)(S
ELI
N1)
BL
(3)
SP
MT
_0(7
)S
PM
T_2
(7)
SP
ID(8
)S
PM
T_3
(7)
SP
MT
_1(7
)
SP
PD
(8)
SR
JD(8
)
SC
OD
(8)
/SR
VC
(7)
/SP
US
(7)
/RS
V_S
OL
(7)
(OP
_DA
TA
)(5
)
To
Po
wer
un
itT
o O
per
atio
nal
PW
B
To
SP
F u
nit
To
LS
U
(Wh
ite)
To
RS
PF
un
it
To
LD
To
Po
lyg
on
mo
tor
CP8
0603SFF150FM/32-2
R278
200J1/4W<3216>
R349
200J1/4W<3216>
C365NM
CP10
0603SFF150FM/32-2
R32
910
0J
CN
29
B12
B-P
H-K
-S(L
F)(
SN
)
1 2 3 4 5 6 7 8 9 10 11 12
C35
6
100P
C27
5
0.1U
/50V
<16
08>
D33
KD
S22
6
213
C364NM
C2801000P
R29
310
0J
C363NM
D65
KD
S22
6
213
R27
610
KJ
R27
71K
J
C35
8
100P
C36
1
100P
R35
30J
R141
200J1/4W<3216>
R38
5
0J
C35
9
100P
R33
1N
M
R29
510
0J
CN
30
B24
B-P
ND
ZS
-1(L
F)(
SN
)
1 3 5 7 9 11 13 15 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24
C27
6
NM
_<16
08>
CP9
0603SFF150FM/32-2
R33
010
0J
R28
21K
JR140
200J1/4W<3216>
C35
7
100P
C34
7
100P
R39
8
0J
CN
41
B05
B-C
ZH
K-B
(LF
)(S
N)(
V)
1 2 3 4 5
CN
2
B24
B-P
ND
ZS
-1(L
F)(
SN
)
1 3 5 7 9 11 13 15 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24
CN
3
FF
4-32
-S15
D5
1234567891011121314151617181920212223242526272829303132
R35
00J
C31
7
100P
C34
9
100P
R29
410
0J
R36
510
0J
R32
810
0J
R29
10J
R29
010
0J
R35
2N
M
C2791000P
CN
42
B08
B-C
ZH
K-B
(LF
)(S
N)(
V)
1 2 3 4 5 6 7 8
R34
7N
M_<
1608
>
C2781000P
R29
210
0J
C27
710
00P
C36
0
100P
A A
B B
C C
D D
E E
44
33
22
11
MC
U P
WB
(C
on
nec
tor
sect
ion
1)
(AL
-205
0CS
)11
/16
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 25
TCK
/RE
SET0
OA_TX
OA_RX
TCK
/RE
SET0
OA_TX
OA_RX
PGND
PGND
24V
24V
24V
24V
24V
SFTMT
24VDu
pMT
5V
5V
5V
5V
VCC3
INT24V
PGND
24V
PGND
5V
24V
VCC3
VCC3
PGND
PGND
VCC3
VCC3
POD
(8)
/RR
S(6)
PPD1
(8)
PPD2
(8)
TMA_O
(7)
TMB_O
(7)
VFMOUT
(6)
/VFMCNT
(6)
24V1(D
SW
S)
(8)
/SFTMT0
(7)
/SFTMT2
(7)
/SFTMT3
(7)
CED1
(8)
RTH_IN
(6)
/SFTMT1
(7)
/DMT0
(7)
/DMT1
(7)
/DMT2
(7)
/DMT3
(7)
PD1
(8)
/CPF
S1
(6)
/MPF
S(6)
MFD
(8)
/RE
SET0
(2,4,5,9)
TDI
(9)
OA_RX
(9)
OA_TX
(9)
TDO
(9)
TM
S(9)
TR
ST_L
(9)
TCK
(9)
/MMCLK
(6)
MMLD
(8)
/MMD
(6)
/CPF
S2
(6)
CED2
(8)
PPD3
(8)
PD2
(8)
/MCNT
(6)
OUT_A+
(7)
OUT_B-
(7)
OUT_A-
(7)
OUT_B+
(7)
PSFMOUT
(6)
RxD
(1)
TxD
(1)
FANLK
(8)
GA
SIC_READY
(2)
OA982_READY
(9)
PSFANLK
(8)
To
VF
Fan
mo
tor
To
Inte
rlo
ck
sw
itch
To
Cassett
ed
ete
ct
To
Cassett
ep
ap
er
so
len
oid
To
Sh
ifte
rm
oto
r
(Fo
rd
eb
ug
)N
otm
ounte
d
To
To
ner
mo
tor
To
Pap
er
pass
dete
ct
To
Pap
er
ou
td
ete
ct
To
HL
un
it
To
Mu
ltiu
nit
To
Resis
tro
ller
so
len
oid
(Red
)
(Bla
ck)
(Blu
e)
(Red
)
(Red
)
(Wh
ite)
(Wh
ite)
(Wh
ite)
(Wh
ite)
(Wh
ite)
To
Du
ple
xm
oto
r
To
Pap
er
dete
ct
CP
US
eri
al
OA
982
JT
AG
&S
eri
al
To
Main
mo
tor
To
2n
d.cassett
e
To
Mech
a.C
OU
NT
ER
(Red
)
To
Mir
ror
mo
tor
(Wh
ite)
(Wh
ite)
(Wh
ite)
(Gre
en
)
(Wh
ite)
(Red
)
To
PS
Fan
mo
tor
(Wh
ite)
LE
Dfo
rC
hecker
C368
1000P
D40
NM_LT1P67A
TP711
CP21
0J<1608>
D39
NM_LT1P67A
CN15
B3B-PH-K-S(LF)(
SN)
1 2 3
CN18
B3B-PH-K-E(LF)(
SN)
1 2 3
C374
NM_<1608>
CN13
B4B-PH-K-S(LF)(
SN)
1 2 3 4
R287
390J
CN24
B3B-PH-K-R(LF)(
SN)
1 2 3
R284
200J1/4W<3216>
CN26
B3B-PH-K-S(LF)(
SN)
1 2 3
Q9
NM_KRC106S
1
2
3TP714
CN35
NM_B03B-PA
SK-1(LF)(
SN)
123
D38
LT1P67A
CN12
B5B-PA
SK-1(LF)(
SN)
1 2 3 4 5
CN20
B05B-XA
SK-1(LF)(
SN)
1 2 3 4 5
CN27
B5B-PH-K-S(LF)(
SN)
1 2 3 4 5
CN21
B3B-PH-K-K(LF)(
SN)
1 2 3
TP713
R283
200J1/4W<3216>
1/4W
CN19
B14B-PHD
SS-B(LF)(
SN)
1 3 5 7 9 1113
2 4 6 8101214
Q10
NM_KRC106S
1
2
3
R285
200J1/4W<3216>
CN17
B10B-PHD
SS-B(LF)(
SN)
1 3 5 7 9
2 4 6 810
C286
1000P
C373NM
R286
200J1/4W<3216>
C285
1000P
CN28
B3B-PH-K-M(LF)(
SN)
1 2 3
C2830.1U/50V<1608>
C281
1000P
C2840.1U/50V<1608>
C2891000P
TP712
CN16
B4B-PH-K-S(LF)(
SN)
1 2 3 4
CN10
B2P-VH-R(LF)(
SN)
1 2
C2871000P
CN25
B2P-VH(LF)(
SN)
1 2
CN23
NM_B3B-PH-K-R
123
TP710
C282
1000P
CN11
B5B-PH-K-S(LF)(
SN)
1 2 3 4 5
R288
NM
CN14
B5B-PH-K-R(LF)(
SN)
1 2 3 4 5
CN22
B4B-PH-K-R(LF)(
SN)
1 2 3 4
R289
NM
C2881000P
A A
B B
C C
D D
E E
44
33
22
11
MC
UP
WB
(Co
nn
ecto
rse
ctio
n2)
(AL
-205
0CS
)12
/16
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 26
#PB_DATA7
#PB_DATA4
#PB_DATA6
#PB_DATA5
PB_NC
S1
(PB_NAE0)
(MDM_IRQ)
(PB_NWE)
(PB_NOE)
MCU_D4
MCU_D3
MCU_D2
MCU_D1
MCU_D6
MCU_D7
MCU_D0
MCU_D5
MODEM_IN
(/RD)
#MDM_IRQ
MCU_INT
MCU_
nC
S
(/FAX_R
ST)
D1D0
D3D2
D7
D5D6
D4
PB_DATA5
PB_DATA7
PB_DATA6
PB_DATA3
PB_DATA0
PB_DATA2
PB_DATA1
#PB_DATA2
PB_DATA4
#PB_DATA1
#PB_DATA3
#PB_DATA0
#PB_ADDR2
#PB_ADDR1
#PB_ADDR0
#PB_ADDR4
PB_ADDR5
PB_ADDR6
#PB_ADDR7
#PB_ADDR5
PB_ADDR1
#PB_ADDR6
#PB_ADDR3
PB_ADDR2
PB_ADDR3
PB_ADDR7
PB_ADDR4
PB_ADDR0
D0
PB_DATA3
D1
PB_DATA0
PB_DATA5
PB_DATA7
D5
(MDM_IRQ)
PB_DATA4
PB_DATA2
MSU_
ST1
PB_DATA6
D4D3D2
D6
PB_DATA1
D7
MCU_D6
MCU_D4
MCU_D0
MCU_D2
MCU_
nC
S
#PB_DATA7
#PB_DATA5
#PB_DATA3
#PB_DATA1
#PB_ADDR7
#PB_ADDR5
#PB_ADDR3
#PB_ADDR1
PB_NC
S1
(PB_NWE)
(/FAX_R
ST)
MODEM_IN
MCU_D7
MCU_D5
MCU_D3
MCU_D1
(/RD)
MCU_INT
#PB_DATA6
#PB_DATA4
#PB_DATA2
#PB_DATA0
#PB_ADDR6
#PB_ADDR4
#PB_ADDR2
#PB_ADDR0
(PB_NAE0)
(PB_NOE)
#MDM_IRQ
VCC3
VCC3
VCC3
24V
EN5V
VCC3
PGND
MDM_IRQ
(9)
PB_NC
S1
(9)
PB_DATA[7:0]
(9,10)
MSU_
ST1
(3)
D[15
..0]
(1,2,3,4)
MODEM_IN
(9)
/CS5
(1)
/FAX_R
ST
(5)
/RE
S_FAX
(1)
(/RD)
(5)
(PB_NWE)
(5)(PB_NOE)
(5)
(PB_NAE0)
(5)
PB_ADDR[7:0]
(9,10)
To
Mo
dem
PW
B
C323NM
C329NM
BR90
33JX4
1234
8765
CP13
0603SFF150FM/32-2
L160J<1608>
C327
10KJ
R315
10KJ
TP903
CP11
0603SFF150FM/32-2
R311
1KJ
D46
KD
S226
213
C321
10KJ
C328NM
BR91
33JX4 1234
8765
BR88
33JX4
1234
8765
BR92
33JX4
1234
8765
R317
1KJ
C325NM
R313
100J
C326
10KJ
TP904
D47
KD
S226
213
BR89
33JX4 1234
8765
C320
10KJ
BR93
33JX4 1234
8765
TP725
CP12
0603SFF150FM/32-2
C337NM
R325
NM
CN5
B40B-PNDZ
S-1(LF)(
SN)
1357911131517192123
24681012141618202224
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
C333
10KJ
C324NM
C335NM
C1020.1U
C334NM
C330
10KJ
C331NM
C336NM
C378
NM
L140J<1608>
R391
100J
C322
10KJ
C332
10KJ
A A
B B
C C
D D
E E
44
33
22
11
MC
UP
WB
(Mo
dem
I/FC
on
nec
tor)
(AL
-205
0CS
)13
/16
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 27
VCL
VCL
AFE_DB#0
AFE_DB#3
AFE_DB#4
VCLAFE_DB#6
AFE_DB#1
AFE_DB#2
AFE_DB#5
AFE_DB#7
AFE_DB6
AFE_DB3
AFE_DB4
AFE_DB7
AFE_DB0
AFE_DB5
AFE_DB#1
AFE_DB2
AFE_DB#7
AFE_DB#2
AFE_DB#6
AFE_DB1
AFE_DB#5
AFE_DB#0
AFE_DB#4
AFE_DB#3
AFE_DB2
AFE_DB3
AFE_DB7
AFE_DB5
AFE_DB0
AFE_DB4
AFE_DB1
AFE_DB6
PGND
24V
12V
EN5V
VCC3
PGND
PGND
CL
(2)
AFE_
SCK#
(5)
ADCLK#
(5)
AFE_
SEN#
(5)
AFE_
SDI#
(5)
VSAMP#
(5)
BSAMP#
(5)
mt_
at_
hom
e(5)
CCD_CP#
(5)
CCD_PHI1#
(5)
CCD_R
S#
(5)
CCD_PHI2#
(5)
CCD_TG#
(5)
AFE_DB[7
..0]
(2)
3
21Co
py
La
mp
Inv
ert
er
To
Sc
an
ne
ru
nit
TP886
R318
910J
C340
0.1U/50V<1608>
C132
47P
C313
47P
R321
5.6KJ1/4W<3216>
+C339
47U/35V
C319
47P
D49
11EQ
S06
C314
47P
L12
220UH
TWKA-221K
R323
15KJ
R324
56KJ
C315
47P
CN4
FF4-32-S15D5
135791113151719212325272931
2468101214161820222426283032
C341
33P
Q6
KTC3198
BR8633JX4
1 2 3 4
8 7 6 5
R319
15KJ
C316
47P
R322
12KJ
L17
1J<1608>
CP18
0603
SFF150FM/32-2
C342
1000P
R320
1KJ
BR8733JX4
1 2 3 4
8 7 6 5
D48
KD
S226
213
CP14
0603SFF150FM/32-2
C318
47P
C109
47P
CP15
0603
SFF150FM/32-2
+C338
47U/35V
Q52
SJ537
A A
B B
C C
D D
E E
44
33
22
11
MC
UP
WB
(Sca
nn
erI/F
sect
ion
)(A
L-2
050C
S)
14/1
6
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 28
/STB_I
/INIT_I
/ACK_O
BU
SY_O
/FAULT_O
SLCT_O
/REV_O
/SLCTIN_I
/AUTOFD_I
PE_O
PARAD7
PARAD3
PARAD5
PARAD4
PARAD6
PARAD1
PARAD0
PARAD2
VCC3
EN5V
EN5V
VCC3
PARAD[7
..0]
(2)
/REV_O
(2)
/FAULT_O
(2)
SLCT_O
(2)
PE_O
(2)
BU
SY_O
(2)
/ACK_O
(2)
/NIC_R
ST
(5)
/RE
S_NIC
(1)
/INIT_I
(2)
/SLCTIN_I
(2)
/AUTOFD_I
(2)
/STB_I
(2)
To
NIC
PW
B
C39012P
C345
0.1U
CP19
0603SFF150FM/32-2
TP674
C39112P
L18
0J<1608>
C346
0.1U
TP680
TP905
C39212P
BR9433JX4
1 2 3 4
8 7 6 5
CP20
0603SFF150FM/32-2
CN39
24FMN-BTK-A
123456789101112131415161718192021222324
R326
1KJ
TP676
C39312P
R327
NM
L19
0J<1608>
C39412P
BR9533JX4
1 2 3 4
8 7 6 5TP717
C343
0.1U
TP906
TP678
C344
0.1U
C1060.1U
C38712P
TP672
R402
NM
C38812P
TP679
C38912P
TP673
A A
B B
C C
D D
E E
44
33
22
11
MC
UP
WB
(NIC
I/Fse
ctio
n)
(AL
-205
0CS
)15
/16
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 29
EN5V
VCC3
EN5V
PGND
EN5V
24V
24V
(CRUM
SDA)
CRUM
SDA
(1)
/ASIC_R
ST
(5)
(CRUM
SDA)
(CRUM
SCL)
TC
S_AN
(6)
TC
S(8)
DV
SEL
(8)
CRUM
SCL
(1)
(CRUM
SCL)
5V
CR
UM
Co
ntr
ol
3.3
V
3.3
V
5V F-GND1
F-GND2
F-GND3
F-GND4
F-GND5
To
DV
Un
itw
ith
CR
UM
(To
An
alo
gT
on
ne
rS
en
so
r)
(Wh
ite)
(Red
)
To
DV
Un
it
(To
An
alo
gT
on
ne
rS
en
so
r)
F-GND6
F-GND7
R279
10J
FB15
0J
orCHIPINDUCTER(NM)<1608>
FB14
0J
orCHIPINDUCTER(NM)<1608>
TP884
D34
KD
S226
213
R281
300J
C350
0.1U
R335
10KJ
D35
KD
S226
213
R280
300J
R334
NM
FB11
0J
orCHIPINDUCTER(NM)<1608>
FB10
0J
orCHIPINDUCTER(NM)<1608>
R348
NM
FB12
0J
orCHIPINDUCTER(NM)<1608>
IC51
TC7SET08F
1 2 3
4
5
FB9
0J
orCHIPINDUCTER(NM)<1608>
FB8
0J
orCHIPINDUCTER(NM)<1608>
IC49
TC7SBD385AFU
A1
B2
OE
4GND
3
Vcc
5
B10B-PHD
SS-B(LF)(
SN)
CN7
1 3 5 7 9
2 4 6 810
CN6
NM_B4B-PH-K-R
1 2 3 4
R341
10KJ
R337
0J
TP721
TP715
TP887
TP883
C348
0.1U
A A
B B
C C
D D
E E
44
33
22
11
MC
UP
WB
(CR
UM
I/Fse
ctio
n)
(AL
-205
0CS
)16
/16
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 30
4. OPERATION PWB (AL-2050CS)
LCD
RS
#
LCD
DB
7#
LCD
DB
4#
LCD
DB
6#
LCD
RS
#
LCD
E#
LCD
E#
LCD
DB
7#
LCD
DB
4#
LCD
DB
6#
LCD
DB
5#LC
DD
B6
LCD
DB
7
LCD
DB
4LCD
DB
5#
LCD
DB
5
5VE
N
5VE
N
3.3V
3.3V
5V
LED
_V2
OP
-CLK
OP
-DA
TA
OP
-LA
TC
H
LED
_V3
LED
_V1
DA
TA
1
LCD
E
LCD
RS
LCD
DB
[7..4
]
LCD
CO
NT
PS
L
To
LCD
FAX
SCAN
COPY
SPFL
HPL
SJAL
BPL
CS1L
CS2L
RPL
PSL
R33
310
0JR
333
100J
TP14 TP14
LTL-
1LH
G-0
02A
LED
308
LTL-
1LH
G-0
02A
LED
308
IC30
4
TB
6272
5AF
IC30
4
TB
6272
5AF
/OUT27
/OUT38
/OUT49
/OUT510
/OUT611
/OUT16
/OUT05 VCC 16
/ENABLE 13
/LATCH 4
S-IN 2
CLOCK 3
S-OUT 14
GND 1/OUT712
R-EXT 15
TP
1T
P1
LTL-
1LH
G-0
02A
LED
309
LTL-
1LH
G-0
02A
LED
309
C32
3
open
C32
3
open
Q30
7
KR
C10
6S
Q30
7
KR
C10
6S
1
2
3
TP
3T
P3
TP5 TP5
R30
210
0JR
302
100J
C329100pC329100p
R30
50JR
305
0J
R34
410
0JR
344
100J
LTL-
1LH
G-0
02A
LED
311
LTL-
1LH
G-0
02A
LED
311
TP
15T
P15
TP6 TP6
C330100pC330100p
LTL-
1LH
G-0
02A
LED
301
LTL-
1LH
G-0
02A
LED
301
R33
210
0JR
332
100J
LTL-
1LH
G-0
02A
LED
306
LTL-
1LH
G-0
02A
LED
306
TP
2T
P2
R33
50J
R33
50J
C332100pC332100p
R32
50JR
325
0J
R30
410
0JR
304
100J
R30
147
0JR
301
470J
C32
2
0.1u
C32
2
0.1u
LTL-
1LH
G-0
02A
LED
310
LTL-
1LH
G-0
02A
LED
310
R32
310
KJ
R32
310
KJ
C30
6
1000
p
C30
6
1000
p
OP
EN
LED
303
OP
EN
LED
303
R33
110
0JR
331
100J
TP10 TP10
LTL-
1LH
G-0
02A
LED
302
LTL-
1LH
G-0
02A
LED
302
IC30
1
GP
M18
1C0
IC30
1
GP
M18
1C0
GN
D1
0
V5
9
VD
D8
RS
7
R/W
6
E5
DB
44
DB
53
DB
62
DB
71
R32
782
0JR
327
820J
C3330.1u C3330.1u
Q30
5K
RA
225S
Q30
5K
RA
225S
3
2
1
TP9 TP9
LTL-
1LH
G-0
02A
LED
307
LTL-
1LH
G-0
02A
LED
307
Q30
3K
RA
225S
3
2
1
R30
6O
PE
NR
306
OP
EN
TP13 TP13
C331100pC331100p
R33
010
0JR
330
100J
Q30
4K
RA
225S
3
2
1
TP
11T
P11
LTL-
1LH
EE
-002
A
LED
304
LTL-
1LH
EE
-002
A
LED
304
LTL-
1LH
G-0
02A
LED
305
LTL-
1LH
G-0
02A
LED
305
TP8 TP8
TP
4T
P4
R33
410
0JR
334
100J
R32
40JR
324
0J
C30
5
1000
p
C30
5
1000
p
C327100pC327100p
R30
310
0JR
303
100J
LTL-
1LH
G-0
02A
LED
314
LTL-
1LH
G-0
02A
LED
314
C30
8
Ope
n
C30
8
Ope
n
Q30
2
KR
C10
6S
Q30
2
KR
C10
6S
1
2
3
D30
4
ZE
NE
R_3
.3V
D30
4
ZE
NE
R_3
.3V
R32
910
0JR
329
100J
C30
7
open
C30
7
open
R32
810
kJR
328
10kJ
C328100pC328100p
TP12 TP12
C3380.1u C3380.1u
TP7 TP7
R32
60JR
326
0J
A A
B B
C C
D D
E E
44
33
22
11
OP
ER
AT
ION
PW
B(L
ED
/LC
Dse
ctio
n)
(AL
-205
0CS
)1/
3
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 31
5V
5V
5VE
N
5V
KE
YS
C1
KE
YS
C2
KE
YS
C3
KE
YIN
SE
LIN
3S
ELI
N2
SE
LIN
1
PS
W
F-K
EY
SC
2F
-KE
YS
C3
F-K
EY
SC
1
F-K
EY
IN1
F-K
EY
IN2
F-K
EY
IN3
F-K
EY
IN4
F-K
EY
IN5
F-K
EY
IN6
F-K
EY
IN7
BZ
R
CAK
NM6K
NM1K
NM8K
RAT
ENT
LK
MODK
BPK
MENU
RK
NM7K
SHPK
NM4K
NM2K
CLK
NM3K
NM5K
NM9K
NM0K
ASTK
EXP
ESRT
2SIDE
PSW
R31
210
0JR
312
100J
R34
3
2kJ
R34
3
2kJ
KE
Y31
5
SK
QN
AB
D01
0
KE
Y31
5
SK
QN
AB
D01
0
TP
26T
P26
R31
71k
J
KE
Y30
6
SK
QN
AB
D01
0
KE
Y30
6
SK
QN
AB
D01
0
R33
910
kJR
339
10kJ
KE
Y32
1
SK
QN
AB
D01
0
KE
Y32
1
SK
QN
AB
D01
0
C31
7
Ope
n
C31
7
Ope
n
R30
710
0JR
307
100J
C30
9
Ope
n
TP
36T
P36
C31
9
Ope
n
TP
29T
P29
R31
310
0JR
313
100J
TP
24T
P24
TP
17T
P17
BZ
301
PS
1720
P02
BZ
301
PS
1720
P02
1
2
C33
4
Ope
n
C33
4
Ope
n
KE
Y32
5
SK
QN
AB
D01
0
KE
Y32
5
SK
QN
AB
D01
0
R30
910
0JR
309
100J
KE
Y30
7
SK
QN
AB
D01
0
KE
Y30
7
SK
QN
AB
D01
0
C31
0
Ope
nC31
8
Ope
n
TP
25T
P25
TP
33T
P33
KE
Y32
2
SK
QN
AB
D01
0
KE
Y32
2
SK
QN
AB
D01
0
KE
Y31
3
SK
QN
AB
D01
0
KE
Y31
3
SK
QN
AB
D01
0
TP
19T
P19
KE
Y30
2
SK
QN
AB
D01
0
KE
Y30
2
SK
QN
AB
D01
0
D30
2
1SS
133
D30
2
1SS
133
R31
833
JR
318
33J
R33
81k
J
C31
1
Ope
n
KE
Y32
4
SK
QN
AB
D01
0
KE
Y32
4
SK
QN
AB
D01
0
C31
6
Ope
n
C31
6
Ope
n
TP
21T
P21
R32
1
2kJ
R32
1
2kJ
KE
Y31
9
SK
QN
AB
D01
0
KE
Y31
9
SK
QN
AB
D01
0
TP
35T
P35
TP
28T
P28
R33
61k
J
R34
0
2kJ
R34
0
2kJ
KE
Y32
0
SK
QN
AB
D01
0
KE
Y32
0
SK
QN
AB
D01
0
KE
Y32
3
SK
QN
AB
D01
0
KE
Y32
3
SK
QN
AB
D01
0D
303
1SS
133
D30
3
1SS
133
R31
51k
J
R30
810
0JR
308
100J
KE
Y30
8
SK
QN
AB
D01
0
KE
Y30
8
SK
QN
AB
D01
0
R31
110
0JR
311
100J
C32
0
Ope
n
KE
Y31
8
SK
QN
AB
D01
0
KE
Y31
8
SK
QN
AB
D01
0
KE
Y31
2
SK
QN
AB
D01
0
KE
Y31
2
SK
QN
AB
D01
0
KE
Y30
1
SK
QN
AB
D01
0
KE
Y30
1
SK
QN
AB
D01
0
TP
31T
P31
TP
32T
P32
KE
Y31
0
SK
QN
AB
D01
0
KE
Y31
0
SK
QN
AB
D01
0
D30
1
1SS
133
D30
1
1SS
133
TP
23T
P23
R34
2
2kJ
R34
2
2kJ
KE
Y30
3
SK
QN
AB
D01
0
KE
Y30
3
SK
QN
AB
D01
0
C33
5
Ope
n
C33
5
Ope
n
R32
0
2kJ
R32
0
2kJ
R32
2
2kJ
R32
2
2kJ
KE
Y31
4
SK
QN
AB
D01
0
KE
Y31
4
SK
QN
AB
D01
0
IC30
2
74H
C15
1
IC30
2
74H
C15
1
D0
4
D1
3
D2
2
D3
1
D4
15
D5
14
D6
13
D7
12
A1
1
B1
0
C9
G7
W6
Y5
VC
C1
6
GN
D8
KE
Y31
7
SK
QN
AB
D01
0
KE
Y31
7
SK
QN
AB
D01
0
R31
9
2kJ
R31
9
2kJ
C33
6
Ope
n
C33
6
Ope
n
TP
16T
P16
TP
34T
P34
C32
1
0.1u
TP
27T
P27
R3482kJ
C30
4
Ope
n
C30
4
Ope
n
TP
18T
P18
KE
Y31
1
SK
QN
AB
D01
0
KE
Y31
1
SK
QN
AB
D01
0
R31
61k
J
R33
71k
J
TP
20T
P20
R31
410
0JR
314
100J
R3472kJ
Q30
6
KR
C10
6S
Q30
6
KR
C10
6S
1
2
3
C31
3
Ope
n
C31
3
Ope
n
C31
5
47pF
TP
30T
P30
R34
1
2kJ
R34
1
2kJ
KE
Y30
9
SK
QN
AB
D01
0
KE
Y30
9
SK
QN
AB
D01
0
R3462kJ
KE
Y30
5
SK
QN
AB
D01
0
KE
Y30
5
SK
QN
AB
D01
0
C33
7
Ope
n
C33
7
Ope
n
KE
Y31
6
SK
QN
AB
D01
0
KE
Y31
6
SK
QN
AB
D01
0
R31
010
0JR
310
100J
IC30
3
74H
C23
8
IC30
3
74H
C23
8
GN
D8
Y0
15
Y1
14
Y2
13
Y3
12
Y4
11
Y5
10
Y6
9
Y7
7
A1
B2
C3
G2
B5
G2
A4
G1
6
VC
C1
6
TP
22T
P22
C31
4
Ope
n
C31
4
Ope
n
KE
Y30
4
SK
QN
AB
D01
0
KE
Y30
4
SK
QN
AB
D01
0
C31
2
0.1u
C31
2
0.1u
A A
B B
C C
D D
E E
44
33
22
11
OP
ER
AT
ION
PW
B(K
EY
/Bu
zzer
sect
ion
)(A
L-2
050C
S)
2/3
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 32
DR
ST
DR
ST
LCD
DB
5
LCD
DB
7
LCD
DB
4
LCD
DB
6
3.3V
5V5V
EN
PS
LP
SW
KE
YIN
OP
-CLK
OP
-LA
TC
H
OP
-DA
TA
SE
LIN
1S
ELI
N2
KE
YS
C2
KE
YS
C3
LED
_V3
F-K
EY
IN1
BZ
RK
EY
SC
1
LCD
RS
LCD
E
SE
LIN
3
LCD
DB
[7..4
]F
-KE
YIN
4
DA
TA
1
F-K
EY
IN2
LED
_V2
F-K
EY
IN5
LED
_V1
F-K
EY
SC
2
F-K
EY
IN6
F-K
EY
SC
3
F-K
EY
SC
1F
-KE
YIN
7
F-K
EY
IN3
LCD
CO
NT
ToM
CU
PW
B
ToD
rum
Initi
alD
etec
tor
ToFA
XK
eyP
WB
TP
43T
P43
TP
51T
P51
C30
3
47uF
/16v
TP
42T
P42
C32
6
0.1u
TP
50T
P50
TP
41T
P41
TP
49T
P49
CN
301
BM
15B
-GH
S-T
BT
1 2 3 4 5 6 7 8 9 10
11
12
13
14
15
TP
57T
P57
CN
302
32F
MN
-BM
TT
R-A
-TB
CN
302
1 2 3 4 5 6 7 8 9 10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
R352Open
TP
48T
P48
C30
2
47uF
/16v
TP
56T
P56
TP
40T
P40
TP
52T
P52
TP
39T
P39
TP
54T
P54
TP
47T
P47
TP
55T
P55
TP
38T
P38
C32
4
0.1u
TP
46T
P46
TP
53T
P53
TP
37T
P37
TP
45T
P45
TP
44T
P44
C30
1
47uF
/16v
C32
5
0.1u
CN
303
S3B
-PH
-K-S
1 2 3
A A
B B
C C
D D
E E
44
33
22
11
OP
ER
AT
ION
PW
B(C
on
nec
tor
sect
ion
)(A
L-2
050C
S)
3/3
AL-2030/2040CS/2050CS CIRCUIT DIAGRAM 13 - 33
LEAD-FREE SOLDER
The PWB’s of this model employs lead-free solder. The “LF” marks indicated on the PWB’s and the Service Manual mean “Lead-Free” solder.
The alphabet following the LF mark shows the kind of lead-free solder.
(1) NOTE FOR THE USE OF LEAD-FREE SOLDER THREAD
When repairing a lead-free solder PWB, use lead-free solder thread.
Never use conventional lead solder thread, which may cause a breakdown or an accident.
Since the melting point of lead-free solder thread is about 40°C higher than that of conventional lead solder thread, the use of the exclusive-usesoldering iron is recommendable.
(2) NOTE FOR SOLDERING WORK
Since the melting point of lead-free solder is about 220°C, which is about 40°C higher than that of conventional lead solder, and its soldering capacity isinferior to conventional one, it is apt to keep the soldering iron in contact with the PWB for longer time. This may cause land separation or may exceedthe heat-resistive temperature of components. Use enough care to separate the soldering iron from the PWB when completion of soldering isconfirmed.
Since lead-free solder includes a greater quantity of tin, the iron tip may corrode easily. Turn ON/OFF the soldering iron power frequently.
If different-kind solder remains on the soldering iron tip, it is melted together with lead-free solder. To avoid this, clean the soldering iron tip aftercompletion of soldering work.
If the soldering iron tip is discolored black during soldering work, clean and file the tip with steel wool or a fine filer.
Example:
5mm
Lead-Free
Solder compositioncode (Refer to thetable at the right.)
<Solder composition code of lead-free solder>
Solder composition
Sn-Ag-Cu
Sn-Ag-BiSn-Ag-Bi-Cu
Sn-Zn-Bi
Sn-In-Ag-Bi
Sn-Cu-Ni
Sn-Ag-Sb
Bi-Sn-Ag-PBi-Sn-Ag
a
b
z
i
n
s
p
Solder composition code
a
CAUTION FOR BATTERY REPLACEMENT
(Danish) ADVARSEL !Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering.
Udskiftning må kun ske med batteriaf samme fabrikat og type.
Levér det brugte batteri tilbage til leverandoren.
(English) Caution !Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent typerecommended by the manufacturer.
Dispose of used batteries according to manufacturer’s instructions.
(Finnish) VAROITUSParisto voi räjähtää, jos se on virheellisesti asennettu.
Vaihda paristo ainoastaan laitevalmistajan suosittelemaantyyppiin. Hävitä käytetty paristo valmistajan ohjeiden
mukaisesti.
(French) ATTENTIONIl y a danger d’explosion s’ il y a remplacement incorrect
de la batterie. Remplacer uniquement avec une batterie dumême type ou d’un type équivalent recommandé par
le constructeur.Mettre au rebut les batteries usagées conformément aux
instructions du fabricant.
(Swedish) VARNINGExplosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en ekvivalenttyp som rekommenderas av apparattillverkaren.
Kassera använt batteri enligt fabrikantensinstruktion.
(German) AchtungExplosionsgefahr bei Verwendung inkorrekter Batterien.
Als Ersatzbatterien dürfen nur Batterien vom gleichen Typ odervom Hersteller empfohlene Batterien verwendet werden.Entsorgung der gebrauchten Batterien nur nach den vom
Hersteller angegebenen Anweisungen.
CAUTION FOR BATTERY DISPOSAL
(For USA, CANADA)"BATTERY DISPOSAL"
THIS PRODUCT CONTAINS A LITHIUM PRIMARY(MANGANESS DIOXIDE) MEMORY BACK-UP BATTERY
THAT MUST BE DISPOSED OF PROPERLY. REMOVE THEBATTERY FROM THE PRODUCT AND CONTACT YOUR
LOCAL ENVIRONMENTAL AGENCIES FOR INFORMATIONON RECYCLING AND DISPOSAL OPTIONS.
"TRAITEMENT DES PILES USAGÉES"CE PRODUIT CONTIENT UNE PILE DE SAUVEGARDE DE
MÉMOIRE LITHIUM PRIMAIRE (DIOXYDE DE MANGANÈSE)QUI DOIT ÊTRE TRAITÉE CORRECTEMENT. ENLEVEZ LAPILE DU PRODUIT ET PRENEZ CONTACT AVEC VOTRE
AGENCE ENVIRONNEMENTALE LOCALE POUR DESINFORMATIONS SUR LES MÉTHODES DE RECYCLAGE ET
DE TRAITEMENT.
COPYRIGHT © 2008 BY SHARP CORPORATIONAll rights reserved.Printed in Japan.
No part of this publication may be reproduced,stored in a retrieval system, or transmitted,
in any form or by any means,
electronic; mechanical; photocopying; recording or otherwisewithout prior written permission of the publisher.
Trademark acknowledgements• Microsoft®, Windows®, Windows® 98, Windows® Me, Windows® 2000,
Windows® XP, Windows® Vista and Internet Explorer® are registered trademarks or trademarks of Microsoft Corporation in the U.S.A. and other countries.
• Adobe®, the Adobe® logo, Acrobat®, the Adobe® PDF logo, and ReaderTM are registered trademarks or trademarks of Adobe Systems Incorporated in the United States and other countries.
• IBM, PC/AT, and PowerPC are trademarks of International Business Machines Corporation.
• Sharpdesk is a trademark of Sharp Corporation.
• All other trademarks and copyrights are the property of their respective owners.
SHARP CORPORATIONDigital Document System GroupCS Promotion CenterYamatokoriyama, Nara 639-1186, Japan
2008 February Printed in Japan