600 horsepower top drive motor - · pdf file• form wound design • vpi sealed •...
TRANSCRIPT
600 HORSEPOWER TOP DRIVE MOTOR
gulfelectroquip.com | 713.675.2525
TOTAL MOTOR SOLUTION
Cast Aluminum Rotor• Higher speed rated than copper bar rotors
• Torsion inertia designed to protect your top drive
DOUBLE the Bearing System• Double the seals - to keep contamination out
• Upgraded greasing system - increases bearing life
Interchangeable with existing motors• Torque, current, power and "load sharing" compatible
• Mounting dimensional fit
GULF ELECTROQUIP DRILLMAX600 600 HP
VERTICAL AC TOP DRIVE MOTOR
Designed and manufactured in the USA by Gulf
Electroquip.
Features:
DOUBLE the Bearing System• Thrust bearing
• Double the load capacity versus standard
bearing
• Designed for brutal Top Drive environment
• Double the seals - to keep contamination out
• Upgraded greasing system - increases
bearing life
• Rotor lock - increases strength during high
vibration
SAFER and Faster Connection• No exposed electricity
• Safer than exposed conductors of old terminal
block
• Insulation protects from shorts and
contamination
Faster connection with copper tabs - bolt, tape & go
• Bi-directional connection tabs for easy access
• No more LH to RH modification
• No more LH and RH duplicate inventory
• Bi-directional makes access faster and
cheaper
Air Cleaning Blower (optional)
• Filters air BEFORE contamination gets inside
• Patented cleaning increases dependability
Upgraded Power Circuit• Over 6 times increased thermal life
• Per IEEE standards on insulation
• Runs 20-30 deg C cooler than most motors
• Form wound design
• VPI sealed
• Superior air cooling
• Kapton insulation developed for NASA
• Class H
• Increased high voltage spike protection from VFDs
GET A BETTER MOTOR AT A FRACTION OF THE COST OF YET ANOTHER TOP
DRIVE MOTOR FAILURE
TOP DRIVE MOTOR FAILURES CAN COST OVER $100,000 AND DAYS OF DOWNTIME
1000+ HP DESIGN DEPEDABILITY IN A 600
HORSEPOWER VERTICAL AC MOTOR
600 HP VERTICAL TOP DRIVE MOTOR
DESIGNED & MANUFACTURED BY GULF ELECTROQUIP
713.675.2525 | gulfelectroquip.com
600 HP VERTICAL TOP DRIVE MOTOR
DESIGNED & MANUFACTURED BY GULF ELECTROQUIP
713.675.2525 | gulfelectroquip.com
EASIER AND SAFER = COPPER TAB CONNECTION
LEFT HAND MOTOR RIGHT HAND MOTORCOPPER TAB
CONNECTION
Easier Connection
• LH and RH with no modification
• No moving existing terminal block
Faster Connection – Bolt on for speed
• No moving existing terminal block
• Tabs are front and center
Safer Connection – no exposed electricity
• Lug your cable for lasting bond
• Bolt, lock washer and nut to connect
• Insulate with electrical tape
YOU ARE READY
STOP REPEATED MOTOR FAILURES … CALL GULF ELECTROQUIP AND UPGRADE TODAY
FULL. Instruments: NI 9217 LOAD TEST – RUNNING TEMPERATURE (C deg) READINGS
Taken with 3-wire RTDs in 2 minute intervals S/N: 16E5CCE,188BD16, 188BD50
FULL LOAD TEST – POWER METER @ FULL LOAD
Take using digital power meter with CTs. Instrument: Yokogawa WT1600 S/N 12AB19611
Purchase your GEQ DRILLMAX400 from the GEQ factory and receive a full factory warranty, GEQ Factory Service, and quality GEQ
Factory Parts. Gulf Electroquip has equipment in stock – ready to order and install.
©2017 GEQ DRILLMAX 400 is a registered trademark of Gulf Electroquip, LTD Gulf Electroquip is not an NOV company. The words NOV, and TDS11 are registered trademarks of National Oilwell Varco. DISCLAIMER: Product specifications and availability are subject to change without notice. Statements contained herein are not intended to create any warranty - expressed or implied. Product trade names, marks or logos are the property of their respective owners. All photography and illustrations are copyrighted by Gulf Electroquip, 2017.
DRILLMAX600 MOTOR OPTIONS DRILLMAX600 MOTOR SPECIFICATIONS
MORE DRILLMAX600 MOTOR OPTIONS
• Thermal Block
• RTDs
• Brake Hub
• Junction Box
• Pinion
• Cable Connections
Splice Kit
• Special Options
425 North Wayside Drive, Houston TX, USA 77020
www.gulfelectroquip.com | [email protected] 24/7 HOTLINE: 713.675.2525
This highly efficient blower lowers contamination
inside the drilling motor, yielding greater
reliability, longer time between rebuilds and less
downtime for the rig.
CALL US TO FIND OUT MORE ABOUT THE DURABLE GEQ DRILLMAX600 AC MOTOR
DRILLMAX600 MOTOR PERFORMANCE CURVES
• Horsepower: 604 & 664
• Volts: 560
• Hertz: 39.2
• Base Speed: 1164 RPM
• Max Speed: 2417 RPM
• Duty: (IEC) S1, Continuous
• Maximum Current at Full Load:
595 AMPS (not to exceed)
• Efficiency: 93.9%
• Number of Poles: 4
• Weight: Approx. 3000 LBS
• Cooling: Separate Force
Ventilation
• Buss Tab Connections
• Enclosure: IP44
• Paint: Safety Yellow
VFD MOTOR PERFORMANCE CURVES - 600 HP 6P 560V 26” Core