6-pole bridge rectifier beg-161-250-000-1...drawn: checked: drawing no. of page 2 modifications: id....
TRANSCRIPT
Drawn:
Checked:
Drawing No.
of
Page2
2
Modifi
catio
ns:
Id. no.
All
rights
rese
rved.
6-pole Bridge Rectifier
Type Max. input voltage
[V~]
U (40...60Hz)1max Design
Normal braking times Shortened braking times
b
11 22 33 44 55 66~~ ~~ ++ --
cc
aa
J [°C]U
IImax
1,0
0,8
0,6
0,4
0,2
0,0-20 0 20 40 60 80
Rated coil voltage
U = 0,9xUSp 1
Function
Operation of the brake with rated coil voltage
U Input voltage (40 to 60 Hz)1 U Rated coil voltageSp
Please read this documentation before you start working!
The 6-pole bridge rectifiers conduce to supply electromagneticDC-brakes
For DC-switching (see connection diagram "Shortened braking times")a spark-suppressor is integrated (terminals 5 and 6). The spark-suppressor inside the rectifier BEG-161-250-000-1 is optimized for operation at 230V AC power line. Thereby the lifetime of the switching contact is improved. With the switching contact the coil power is switched.
and clutches with full-wave rectified AC voltage.Different application is only permitted with technical approval of INTORQ.
Attachment options
Dimensions
Permissible current load at ambient temperature
Connection
Coil voltage selection
coilc bridgeb mainsa
Design: horizontal
Design: horizontal
52,6
21,5
1,84,3 46,9-0,1
51,9-0,1
3,4
38
4
42
3,4
BEG-161-250-000-1 +0%250 horizontal
5
i13046442Typ BEG-161-250-000-1
B2 250V~ 0,75A
Stop!Keep these instructions with the rectifier at all times!Install rectifier in the switch cabinet if the ambient temperature is toohigh!
DangerAlways disconnect the equipment from the power supply whenworking on the rectifier!
Rectifier type
Output voltage
Ambient temperature (storage / operation)
Bridge rectifier (B2)
0,9xU1
0,75[A]
[V=]
[°C]
U Input voltage (40...60Hz)1
Technical data
max +40
-25...+80
Wire cross section 0,5 ... 2,5mm² / AWG20 ... AWG14
0,45Nm (4lbf in)
7mm
Tightening torque
Stripping length
I at 60°Cmax
Attention!The terminals must be wired with copper conductors. The conductorsmay be solid or stranded and tinned in the end or stranded with cable end sleeve.
Kendrion INTORQ GmbH31855 Aerzen
05.03.2020
05.03.2020
Fuhrmann
KüterD.BEG.0006
13128178 DE/EN
E307886
V01 6
03391 0
5.0
3.2
020 F
uhrm
ann
- - - -BEG 161 250 000 1