P.O. Box 61366 • Jebel Ali Free Zone, Dubai • United Arab EmiratesTel: +9714-883-7272 • Fax: +9714-883-9274

Email: info@atmcaps.ae • Web: www.atmcaps.com

manufacturersfor the

specialist

bottledwater

industry

gallon5

AT M EN T ER PR ISES

AT M EN T ER PR ISES

ATM ENTERPRISES FZCO

Table of ContentsA History of Quality ................................................... 2

Introduction ................................................................ 3

Quality Standards ....................................................... 4

Our Mission................................................................. 5

Single Piece Caps ......................................................... 6

Two Piece Caps ............................................................ 7

Cap Features ................................................................ 8

5 Gallon Bottles ........................................................ 10

Timeline ..................................................................... 12

The Group/Contact Information ...............................14

Introduction

We have been manufacturing 5 gallon water bottles and caps for over ten years. Our focused, in-depth specialisation in the HOD business has granted us an

extensive understanding of the industry’s operational and technical aspects.

Our clients include Nestle Waters, Aquafina - Pepsi, Masafi, and other leading regional brands.

ATM has technical workers with over 20 years of experience in the industry. Our senior management are highly qualified professionals with a combined international business experience of over 40 years.

We are an internationally approved supplier for the world’s top water bottling brands.

Ahistoryof

QualityEstablished in 1999,

ATM Enterprises

manufactures exclusively

for the 5 gallon bottled

water industry.

3

Quality Standards Our Mission

We believe in making quality improvement a way of life, perpetuating product safety, and responding swiftly to customer

requirements. ATM is committed to the health and safety of our employees and to the protection of the environment.

ATM provides regular employee training to ensure that strict adherence to operating procedures is maintained at all times.

In the unlikely event that customer expectations are not met, ATM will offer total product recall, and replacement free of cost.

HACCP and ISO 9001:2008 certified.

Extruded, closed cell, non crosslinked foam made out of LDPE. The material is 100% recyclable and is produced without any CFC, HCFC or azodicarbonamide.

All supplier quality audits of multinationalclients passed.

Only 100% virgin raw material used for all products.

Raw materials are of the highest quality and meet all relevant FDA & EC regulations.

All caps are treated with extensive UV.

Material Safety and Data Sheets (MSDS) are readily available. Contact us at www.atmcaps.com.

Caps are tested at regular intervals using microbiological analysis.

EN ISO 9001 : 2008Management system as per100%virgin raw

material

we use only

54

The 5 groove monocap has eliminated an inner foam liner.

Label acts as a dust cover and protects from external pollutants. It can be customised for branding.

All cap models come in a variety of colours

Extruded, closed cell, non crosslinked foam made out of LDPE. The material is 100% recyclable and is produced without any CFC, HCFC or azodicarbonamide.

The two piece caps are also available with 5 groove construction instead of a foam liner.Single piece minimises external

water contamination.

Foam Liner Removed

15% less resin used

Weight reduced

Easier to recycle;more eco-friendly

Single Piece Caps Two Piece CapsAll our products are manufactured with strict adherence to ISO 9001:2008 and HACCP regulations. These certificates can be downloaded at:www.atmcaps.com/downloads.html

5 groove construction has eliminated the need for an inner foam liner. This enhances leak protection and ensures a secure fit between the cap and the bottle.

Inner cap is easily resealedwhen bottle is removed.

Blue

Green

Red

Custom

76

Non SpillTwo Piece Cap

Non SpillMono Cap

Non Spill MonoShort Cap

Product Code ATM-5G2P ATM-5GMR ATM-5GMS

Height 38.8 mm ± 0.2 mm 38.1 mm ± 0.2 mm 26.5 mm ± 0.2 mm

Height with tail 57.5 mm ± 0.2 mm 57.7 mm ± 0.2 mm 45.9 mm ± 0.2 mm

Outer Diameter 58.3 mm ± 0.3 mm 57.3 mm ± 0.3 mm 57.3 mm ± 0.3 mm

Weight 13.5 g ± 0.15 g 12.0 g ± 0.3 g 10.0 g ± 0.15 g

Shrinkage 18/1,000 ~ 26/1,000 18/1,000 ~ 26/1,000 18/1,000 ~ 26/1,000

Label Size 44.0 mm 44.0 mm 44.0 mm

Special Features AZD and SEM free foam liner or 5 groove

construction

5 grooveconstruction

5 grooveconstruction

• Customised heat applied non adhesive labelling• Suitable for all kinds of bottle neck finishes• Colours include blue, navy blue, red, white or customer defined• High quality European standard, lubricant free, hot runner fully automatic moulds• Certificate of Analysis & Conformity with each delivery• Complies with ISO 9001:2008 and HACCP

Cap Features

9

Specifications

Height 490.0 mm ± 1.5 mm

Width Ground 271.0 mm ± 1.5 mm

Neck Outside 55.3 mm ± 0.3 mm

Neck Inside 45.5 mm ± 0.8 mm

Weight 850.0 g ± 20 g

Wall Thickness > 0.75 mm

Capacity 18.942 Liters

Leakage Test 120 Hours (Filled)

Compression Test > 1050 N

Drop Test Height 2 M (Filled)

• Customised heat applied non adhesive labelling• Bottle labels are high resolution, high durability, and scratch proof• Bottles can be supplied with or without handles• Supplies guaranteed in peak seasons• Superior bottle neck finish• Bottle wall thickness controlled at 70 stages from neck to bottom• Wall thickness gives extra strength, durability, and trippage• Certificate of Analysis & Conformity with each delivery• Complies with ISO 9001:2008 and HACCP

5 Gallon Bottles

10

ATM launches its 5 groove monocap,

a single piece non spill cap.

This light weight cap saves resin,

and eliminates the need for an inner

foam liner.

2003The 5 groove short cap is introduced. Both single piece caps work equally

effectively on injection and

extrusion bottles.

2004ATM establishes

its 5 gallon bottles with nonadhesive, heat applied, high durability, high

resolution scratch proof labels.

2007

Timeline

ATM introduces the first heat sealed nonadhesive cap

labels to the region.

2001ATM established in Dubai, UAE.

1999

We were the first to introduce heat applied cap labels to the region.

Our innovative

has replacedan inner

5 groove

foam liner12

cap

ATM Group Investments Holding Company

ATMEnterprises FZCO

ATMPlastic Industry L.L.C.

ATM Enterprises(PVT) Limited

The Group

ATM ENTERPRISES

P.O. Box 61366Jebel Ali Free Zone

Dubai, United Arab Emirates

Tel: +9714-883-7272Fax: +9714-883-9274

Email: info@atmcaps.aeWeb: www.atmcaps.com

16