5configuration te
TRANSCRIPT
TELES.TRAINING
Teles configuration
TELES.TRAINING
2
VoIPBOX 4 BRI ports (2NT & 2TE OR 0TE & 4 NT) 8 VoIP media channels
VoIPBOX PRI (1U) 1 to 6 PRI lines Up to 180 VoIP media channels
Product variants
TELES.TRAINING
3
Mobile gateways (TELES.iGATE) Mobile interfaces 4/8/16/32 - 600 (GSM, CDMA, 3G/UMTS) PRI / ISDN interfaces 1/2 - 6 x E1 VoIP channels 8/16/32 - 180 x VoIP channels IP 2 x Ethernet 10/100 Base-T
Product variants
TELES.TRAINING
4
TELES.VoIPBOX GSM Mobile interfaces 4 x GSM or CDMA Analog interfaces 4 x FXS VoIP channels 8 VoIP channels IP 2 x Ethernet 10/100 Base-T PPP support via GPRS*, CDMA2000
* Roadmap
General features
TELES.TRAINING
5
Number Portability Callback / SMS Callback SNTP client IP router over xDSL (PPPoE) and ISDN vLAN routing Bandwidth control (VoIP priority / dynamic codec fallback) Firewall functionality NAT, PAT Http User Interface DNS Forwarder Ipupdate (e.g. DynDNS)
VoIP features
TELES.TRAINING
6
Signaling: SIP (RFC 3261), H.323 (v4) working in parallel Voice Codecs: G.729, G.723.1, G.711, G.726, G.728, GSM, iLBC DATA: clear channel (RFC 4040), gnx64, ccd (RFC3108) DTMF Tone: outband: RFC 2833, SIP Info (RFC 2976) / H.323 Info or inband Fax: T.38 or inband Multiple Gatekeeper support H225 (v4) or/and Multiple Registrar support Radius AAA; Authentication and CDR (RFC2835) STUN client (RFC3489) (usable for SIP and H.323) ENUM client (RFC3764, RFC3824) Silence suppression (VAD / CNG) Echo cancellation G.168-2000 RTP multiplex bandwidth reduction Ring tone generation Configurable TOS (Type of Service) / DiffServ (Differentiated Services)
iGATE and VoIPBOX GSM
TELES.TRAINING
7
Features LCR engine: Use the best rate out of mobile, PSTN, and VoIP Selective routing by destination or time Generation of AOC (Advice of Charge) Multilevel alternative routing (voice/data/fax) Digit collection Black list, White list Alert/Busy/Announcement tone detection generates proper signaling Online traffic statistics and CDR Direct line (two-stage-dialing) & Callback server E-Mail to SMS conversion SNMP 2 Ethernet interfaces
iGATE
TELES.TRAINING
8
Reduce costs for fixed-to-mobile calls Different SIM contracts per channel (1 to [n] SIMs) Integrated SIM server support Integrated VoIP gateway Powerful least cost routing Callback-server functionality Fixed network backup via mobile
TELES.NMS network-management software
iGATE
TELES.TRAINING
9
Corporate-user benefits Gain access to PSTN and Internet where you have limited or no wire connection Simple and fast set up (no change at customers site) Cost-effective voice & data Enhanced voice services and additional extensions Mobile-operator benefits Use existing GSM, CDMA, or 3G infrastructures to connect corporate users Enhance product portfolio: Fixed lines & broadband Internet access Greater customer base (SMEs) and additional air time! Customer retention
TELES.TRAINING
Configuration
Remote access overview
TELES.TRAINING
11
Access to the system and configuration Initial configuration with Quickstart LAN access (TCP/IP) Remote access software GATE Manager via TCP/IP ISDN Data call CDMA/UMTS (connection initiated by Access Gateway) Remote access via HTTP User Interface LAN / WAN access (TCP/IP) Remote access via FTP / Telnet LAN / WAN access (TCP/IP) NMS Self provisioning NMS (optional)
Configuration | Initial Startup with TELES.Quickstart
TELES.TRAINING
12
Install Quickstart on your computer or run it from CD Configure network settings for the system: IP address Sub net mask default gateway NTP server address and timezone (sets the system time!!) Click Next and/or Finish Access to the system now via TELES.GATE Manager
For VoIPBOX BRI there is a wizard that configure: line interfaces routing entries
Configuration | GATE Manager
TELES.TRAINING
13
For remote maintenance of single network elements, you can start the GATE Manager application directly from your desktop.
Configuration | Web interface
TELES.TRAINING
14
Default settings are: IP: 192.168.1.2 Mask: 255.255.255.0
Access the system via HTTP - Three levels of access: Read-only access Rights to change IP settings All rights
Configuration | FTP interface
TELES.TRAINING
15
Access the system via FTP Change directory to /boot Download ip.cfg file and change it according to your needs
Configuration | Self provisioning NMS
TELES.TRAINING
16
Zero touch installation for the end customer Automatic customized creation of the individual configuration files Input of customer data from the order processing data base to the NMS First contact configuration of VoIP settings and line interfaces
operational box shipped customer activated
box configuration
necessary input for generating configuration
Configuration | Configuration files (Overview)
TELES.TRAINING
17
The 3 configuration files are:
Ip.cfg Basic configuration of the Ethernet interface(s)
Pabx.cfg System-specific and port-specific settings
Route.cfg Routing entries
Configuration | Ethernet Ports Config (ip.cfg)
TELES.TRAINING
18
Basic settings for the Ethernet interfaces (IP address / mask / DGW) Same as on the QuikStart Different scenarios for the second interface HUB mode DSL router vLAN router Firewall / NAT firewall DHCP server IP router over ISDN Dialup Bandwidth Control (VoIP priority) Example (default): [System] DefaultGw=192.168.1.1 [emac0] IpAddress=192.168.1.2/24
Configuration | System Config (pabx.cfg)
TELES.TRAINING
19
System-specific settings and the port configuration: Bypass relay (Life line) Log files Night configuration (time-dependent routing and SIM switching) Controllers (defines the parameters that apply to the ports) Subscribers (features for each port) Global settings: VoIP basics DNS Server settings NTP Server settings Remote access settings SIM Server settings STUN client
Number portability settings SNMP configuration (runs as optional function module)
Configuration | System Config (pabx.cfg)
TELES.TRAINING
20
Default
... Controller00=9 TES2M DSS1 CRC4 Controller01=10 NTS2M DSS1 CRC4 This configures port 00 as TE, ports 01 as NT, CRC4 is on Controller02=40 VoIP ... Subscriber00=TRANSPARENT ROUTER ALARM Subscriber01=TRANSPARENT ROUTER ALARM Subscriber02=TRANSPARENT ROUTER CHMAX[16] ALARM ...CHMAX[16] Defines the number of channels per G.729 module
Configuration | VoIP Settings (pabx.cfg, optional)
TELES.TRAINING
21
Global VoIP Settings (Telephony Routing / VoIP Carrier) VoipGlobalMaxChan=30 H225Port=1720 SipPort=5060 VoipRtpPort=29000 VoipRtpPortSpacing=2 Maximum VoIP channels for the system H.323 signalling port SIP signalling port Starting UDP port for RTP (RTCP uses the next port) Space between 2 RTP streams (2 is minimum)
Configuration | Example (HTTP User Interface)
TELES.TRAINING
22
HTTP User Interface (Port Settings)
Configuration | Routing Functions (route.cfg)
TELES.TRAINING
23
Routing commands:- MapAll With these entry we rout calls between the ports. - Restrict This entry applies only for a single controller - Redirect This entry will reroute the call in case of connection failure The order of the mapping is: 1. From top to bottom 2. More specific to more global.
Example: MapAll00=90111100 MapAll0170=262010170 MapAll0172=262020172 MapAll0=9022220
MapAll00=90111100
Configuration | Routing Functions (route.cfg)
TELES.TRAINING
24
Controller specific routing entries Restrict= MapAll= This entry applies only for a single controller or in addition to complete or partial OAD, the DAD is searched in the second step and follows the known rules. Example: Restrict40=pl Restrict10=lp MapAllpl=10 MapAlllp=40DF:
Configuration | Routing Functions (route.cfg)
TELES.TRAINING
25
Alternative Routing Redirect3= MapAll= This entry will send a call with the number to another port (e.g. PRI) in case of connection setup failures. Note: This configuration could cause longer post-dial delays! Example: MapAll0172=#262020172 Redirect326202=pl MapAllpl=9
Configuration | Routing Functions (route.cfg)
TELES.TRAINING
26
Routing entry to a VoIP peer MapAll=: This entry contains the name of a VoIP profile, that include all parameters to establish a connection to the peer. Example: MapAll00=40DF:00
Configuration | Routing Functions (route.cfg)
TELES.TRAINING
27
Digit collection DTMFWaitDial= MapAll=|