59 355-9702 rev-1

2
Horizon’s Equipment System Add-On Kit The idea behind the “Add-On” kit is to allow you the maximum flexibility when installing the control system of your choice. This kit is used for systems that use an L-Shaped heater like that of Hydroquip Platinum Series control systems. Dimensions W-26 1/4” x D- 15 1/4” x H-15 3/4” To install this kit: Locate a flat level surface to place Equipment Base (B). 1. There are numerous options for placing equipment on the 2. equipment base see Diagram A and B. Place Pump & Motor (K) with Rubber Motor Base (A) and 3. installer supplied L-Shaped Heater on equipment base. Attach 1 each Strain Relief (H) to motor with installer 4. supplied cord. Utilizing 2 each Screws (D), along with 2 each Washers (E), 5. secure motor to equipment base. If kit utilizes blower option, attach Amp Adapter Kit ( 6. I ) to installer supplied blower cord and attach cord to optional blower. Utilizing remaining Screws (D), secure Blower, Control 7. System, and any other installer supplied equipment to equipment base. Install Bonding Wire (C) to equipment then to installer 8. supplied control grounding lug. Glue Thermowell 9. Tee (G) to Union Assembly (F), thread remaining Strain Relief (H) to Tee Assembly and secure sensor from installer supplied control system. (Diagram C ) 1ea. 59-270-1010 Rubber Motor Base A. 1ea. 59-270-1005 Equipment Base 1”x 15-1/4” x 26-1/4” B. 1ea. 60-555-3000 Bonding Wire C. 6ea. 59-555-2050 Screw, 1”#10 Self Tap D. 2ea. 59-555-2051 Washer, 3/16 x 9/16 E. 1ea. 89-270-1166 2” Pump Union F. 1ea. 89-270-1442 Tee, 2”Sx2”Spgx1/2”Fpt G. 2ea. 60-555-1225 Strain Relief, 1/2” H. 1ea. 59-322-2000 Amp Adapter Kit 3-pin ( I. Optional) 1ea. Blower Various Voltages ( J. Optional) 1ea. Pump & Motor of Various Horsepower and Voltages K. This kit contains: A C E D I B K J H F G http://www.MyPoolSpas.com Wholesale Pool and Spa Parts 920-925-3094

Upload: accurate-pool-spa-services-llc

Post on 15-Apr-2017

187 views

Category:

Documents


0 download

TRANSCRIPT

Horizon’s Equipment System Add-On KitThe idea behind the “Add-On” kit is to allow you the maximum flexibility when installing the control system of your choice. This kit is used for systems that use an L-Shaped heater like that of Hydroquip Platinum Series control systems.

DimensionsW-26 1/4” x D- 15 1/4” x H-15 3/4”

To install this kit:

Locate a flat level surface to place Equipment Base (B). 1. There are numerous options for placing equipment on the 2. equipment base see Diagram A and B.Place Pump & Motor (K) with Rubber Motor Base (A) and 3. installer supplied L-Shaped Heater on equipment base.Attach 1 each Strain Relief (H) to motor with installer 4. supplied cord.Utilizing 2 each Screws (D), along with 2 each Washers (E), 5. secure motor to equipment base.If kit utilizes blower option, attach Amp Adapter Kit ( 6. I ) to installer supplied blower cord and attach cord to optional blower.Utilizing remaining Screws (D), secure Blower, Control 7. System, and any other installer supplied equipment to equipment base.Install Bonding Wire (C) to equipment then to installer 8. supplied control grounding lug.Glue Thermowell 9. Tee (G) to Union Assembly (F), thread remaining Strain Relief (H) to Tee Assembly and secure sensor from installer supplied control system. (Diagram C )

1ea. 59-270-1010 Rubber Motor Base A. 1ea. 59-270-1005 Equipment Base 1”x 15-1/4” x 26-1/4”B. 1ea. 60-555-3000 Bonding WireC. 6ea. 59-555-2050 Screw, 1”#10 Self TapD. 2ea. 59-555-2051 Washer, 3/16 x 9/16E. 1ea. 89-270-1166 2” Pump UnionF. 1ea. 89-270-1442 Tee, 2”Sx2”Spgx1/2”FptG. 2ea. 60-555-1225 Strain Relief, 1/2”H. 1ea. 59-322-2000 Amp Adapter Kit 3-pin (I. Optional)1ea. Blower Various Voltages (J. Optional)1ea. Pump & Motor of Various Horsepower and VoltagesK.

This kit contains:

A

C

ED

I

B

KJ

H

F

G

http://www.MyPoolSpas.com Wholesale Pool and Spa Parts 920-925-3094

Doc#59-355-9702 Rev. 1

Equipment System Add-On Kit Instructions For Systems

With L-Shaped Heaters

Diagram A

Diagram B

Diagram C

http://www.MyPoolSpas.com Wholesale Pool and Spa Parts 920-925-3094