5390 with supp - pdf
TRANSCRIPT
-
8/7/2019 5390 with supp - PDF
1/111
DIGITAL TER
U
5390
E109000197A
STRONG & Co. (FAR EAST), LTD.P. O. Box: 85, YOKOHAMA, KANAGAWA-KENJAPAN 231-91 - FAX: + 81 45 662-4957Website : www.strong-tec hnologies.comE-ma il: tech@strong-tec hnologies.com
-
8/7/2019 5390 with supp - PDF
2/111
IMPORTANT SAFETY INSTRUCTIONSAll the safety and operating instructions should be readbefore the product is operated.The safety and operating instructions should beretained for future reference.All warnings on the product and in the operatinginstructions should be adhered to.All operating and using instructions should be followed.Unplug this product from the wall outlet beforecleaning.
Do not use liquid cleaners or aerosol cleaners, Usedamp cloth for cleaning.Do not use attachments not recommended by theproduct manufacturer as they may cause hazards.
Do not use this product near water - for example, near abath tub, wash bowl, kitchen sink or laundry tub; in awet basement; or near swimming pool; and the like.Do not place this product on an unstable cart, stand,tripod, bracket, or table, The product may fall, causingserious injury to a child or an adult and serious damageto the product. Use only with a cart, stand, tripod,bracket, or table recommended by the manufacturer, orsold with the product. Any mounting of the productshould follow the manufacturers instructions, and
should use a mounting accessory recommended by themanufacturer.
A product and cart combination should be moved with care. Quick stops, excessive forcesand uneven surfaces may cause the product and cart combination to overturn.
WARNING
To prevent fire or shock hazard, do not exposethe unit to rain or moisture.
AVIS
POUR EVITER LE RISQUE DINCENDIE OU CHOC ELECTRIQUE-NEPAS EXPOSER LAPPAREIL A LA PLUIE OU LA MOITEUR
ATTENTION : RISQUE CHOC LELECTRIQUE-NEPAS OUVRIR
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCKDO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDEREFER SERVICING TO QUALIFIED SERVICE PERSONNEL
RISK OF ELECTRIC SHOCK,DO NOT OPEN
This symbol is intended to alert the user to thepresence of uninsulated "dangerous voltage"within the product's enclosure that may be ofsufficient magnitude to constitute a risk of electricshock to persons.This symbol is intended to alert the user to thepresence of important operating andmaintenance(servicing) instructions in theliterature accompanying the appliance.
CAUTION : TO PREVENT ELECTRIC SHOCK. MATCHWIDE BLADE OF PLUG TO WIDE SLOT,FUSE INSERT.
ATTENTION : POUR VITER LES CHOC LECTRIQUES.INTRODURE LA LAME LA PLUS LARGEDE LA FICHE DANS LA BORNE
CORRESPONDANTE ED LA PRISE ETPOUSSER JUSOUAU FOND.NOTE TO CATV SYSTEM INSTALLER : THIS REMINDERIS PROVIDED TO CALL THE CATV SYSTEMINSTALLERS ATTENTION TO ARTICLE 820-40 OF THENEC THE PROVIDES GUIDELINES FOR PROPERGROUNDING AND, IN PARTICULAR, SPECIFIES THATTHE CABLE GROUND SHALL BE CONNECTED TOTHE GROUNDING SYSTEM OF THE BUILDINGS ASCLOSE TO THE POINT OF CABLE ENTRY ASPRACTICAL.
-
8/7/2019 5390 with supp - PDF
3/111
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect
it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placingthe product on a bed, sofa, rug, or other similar surface. The openings should not be placed in a built-in installation such aa bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
This product should be operated only from the type of power source indicated on the marking label. If you are not sure ofthe type of power supply to your home, consult your product dealer or local power company. For porducts intended tooperate from battery power, or other sources, refer to the operating instructions.
This product may be equipped with a polarized alternating-current line plug(a plug having one blade wider than the other)This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into toutlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Donot defeat the safety purpose of the polarized plug.
Power supply cord should be routed so that they are not likely to be walked on or pinched by items placed upon or againstthem, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from theproduct.
If an outside antenna or clable system is connected to the product, be sure the antenna or cable system is grounded so asto porvide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code,ANSI/NFPA 70, provides information with regard to proper grounding of the mest and supporting structure, gorunding ofthe lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connectionto grounding electrodes, and requirements for the grounding electrode.
For added protedtion for this product during a lighting storm, or when it is left unattecded and unused for long periods oftime, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the productdue to lightning and power-line surges.
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or powercircuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme careshould be tacken to keep from touching such power lines or circuits as contact with them might be fatal.
Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire orelectric shock.
Never push any kinds of objects into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill any kind of liquid on the product.
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:When the power supply cord or plug is damaged.If liquid has been spilled, or objects have fallen into the product.If the product has been exposed to rain to water. If the product does not operate normally by following the operatinginstructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of othercontrols may result in damage and will often require extensive work by a qulaified technician to restore the product to itnormal operation.If the product has been dropped or damaged in any way.When the product exhibits a distinct change in performance - this indicates a need for service.
When replacement parts are required, be sure the service technician has used replacement part specified by themanufacturer or have the same characteristics as the original part. Unauthorized subsitutions may result in fire, electric
-
8/7/2019 5390 with supp - PDF
4/111
shock, or other hazards.
Upon completion of any service or repair to this product, ask the service technician to perform safety checks to determinethat the product is in proper operating condition.
The product should be situated away from heat sources such as radiators, heat registers, stoves, or otherproducts(including amplifiers) that produce heat.
-
8/7/2019 5390 with supp - PDF
5/111
1
11. Introduction 21.1 Overview1.2 Main Features
12. Safety/Precautions 32.1 Safety2.2 Precautions
3. Check Point before Use 53.1 Accessories
14. Controls/Functions 64.1 Front Panel4.2 Rear Panel4.3 Remote Control unit
15. Using Remote Control unit 115.1 Batteries5.2 Range Of Operation
16. How to Connect 13
17. Operation 167.1 Getting Started7.2 Channel Editing7.3 System Parameters7.4 Manual Scan7.5 Factory Set7.6 Software Download7.7 Other Function on Remote Control unit
18. Hard Disk Operation 688.1 Recording8.2 Playing8.3 Delete Programs8.4 Lock Programs8.5 Skip Play8.6 Split Operation8.7 Trick Play Controls without OSD8.8 Direct Recoding & Pause
19. Trouble Shooting 83
10. Specifications 84
-
8/7/2019 5390 with supp - PDF
6/111
2
Fully compliant with MPEG-2 and DVB standards
User friendly operating Menu and On-Screen Graphic Menu
Easy to use EPG(Electronic Program Guide)on screen
Age protection lock function
Manual PID control
Software downloading via RS-232C connector
Tele-text encoding
Hard Disk Functions
This terrestrial receiver is designed for giving you the opportunity to enjoy digitalbroadc asting. This receiver is a technical masterpiece, assembled with the highestqualified electronic parts.
-
8/7/2019 5390 with supp - PDF
7/111
3
Be sure to read the user's manua l beforestarting the operation of the unit.
Never open the cover. It is very dangerous totouch the inside of the unit due to possibleelectric shock.
When you do not use this unit for a long time,make sure that power cord is pulled out fromthe outlet. Also do not use a damaged
power cord as it may c ause fire or electricshock.
Do not touch the power cord with wet handsas it may c ause electric shock.
A professional installation is required.If reception is interrupted, contact yourloca l service centre.
Place the unit in a well ventilated and no-heat environment.
-
8/7/2019 5390 with supp - PDF
8/111
4
When installing the unit
Install the unit horizontally. An uneven
installation may c ause the unit to bedamaged.
Do not put heavy items such as a TV on the
unit. That may cause the unit to bedamaged.
Moving the unit to a hot area from a c old
one will cause condensation.Do not operate the unit for one or two hoursor until it has dried completely.
Where it is subject to vibrationsWhere it is exposed to direct sunlightWhere there is humidityWhere the tempera ture is too high or too low.Where there is no ventilation
Do not install the unit:
Do not put water holding items shch as vaseon the unit.
Do not leave the unit where the waterdrops or splashs.
-
8/7/2019 5390 with supp - PDF
9/111
5
User's manual : 1
U s e r ' s
m a n
u a l
Remote control : 1
Batteries (AAA type) : 2
RF Cable(0.25M) : 1
RCA video/audio cable : 1
If any accessories listed above a re
missing, contact the salesrepresentative where you purchasedthis unit.
Accessories of the Unit
QZ- A BC D EF
G HI J KL MN O
PRS TUV WXY
INFO AUDIO
GUIDE CH.LIST
AUXIN
RECALL
TV/RADIO TV/STB
MENU EXIT
CH
VOLVOL
CH
-
8/7/2019 5390 with supp - PDF
10/111
6
Power
To switch the receiver in standby mode or in power on mode.
Remote SensorReceives the infrared signal from remote control.
Channel Display(4 Digit)- When you connect the power line of the receiver, the current time is displayed.- After programming, the program number is displayed.
Menu
To launch or terminate the menu application.
SelectTo activate a highlighted item or go to next level on hypertext menu or confirm theuser s ac tion.
5
4
3
2
1
5390
1 2
4 5 6 9 7
3 8 11 1210
-
8/7/2019 5390 with supp - PDF
11/111
7
- Vol. /To adjust the volume level or change the value of an item with preprogrammedvalues. The Key can be used as a backspace to cancel the numerical input.
- CH. /To c hange channel or cursor position on the applica tion screen.
Remote Control indication lightFlashes orange when receiving da ta from remote control.
TV/Sat. mode Indication lamp lightTurn on green while rec eiving the signa ls from terrestrial UHF/VHF antenna.
Standb y/Power on Indic ation lightTurn on red while in the standby mode and turn off the red light while in the power onmode.
Slot A, BPCMCIA-module :provided by a broadcaster for watching scrambled programs.
Smart Card SlotSmart Card :provided by a broadc aster for watching IRDETO scrambled programs.
12
11
10
98
76
-
8/7/2019 5390 with supp - PDF
12/111
8
4
COAXIAL
RF LOOP IN
TV ANTIN
RF LOOPOUT
RS-232C
RF OUTUHF 21-69
OPTICAL S-VIDEO
S/PDIF
1 2 3 5 7 9 10 12
6 8 11 13
No. Name Connector Function
1 DIGITAL AUDIO Optical port Dig ita l audio output.
2 S-VIDEO S-Video jack S-Video output.
3 DIGITAL AUDIO RCA c inch Dig ita l Aud io Output.
4 TV SCART SCART SCARToutput to TV.
5 VCR/AUX SCART SCART SCARToutput to VCR, analog receiver or Hi-Fi.
6 RF LOOP IN IEC 169-2 femaleInput from general aerial antenna or analog cable jack
7 RF OUTUHF 21-69IEC 169-2 male Output to TV.
8 VIDEO RCA c inch Composite video output.
9 AUDIO L RCA cinch Left audio output.
10 AUDIO R RCA c inch Right audio output.
11 TV ANTIN IEC 169-2 femaleTerrestrial steam input from antenna to d igital tuner.
12 RF LOOP OUT IEC 169-2 male Terrestrial steam loop-through out from digital tuner.
13 RS-232C DB-9 serial port.
-
8/7/2019 5390 with supp - PDF
13/111
9
POWER: To switch into standby or poweron mode.
MUTE: To turn the sound on/off.
Numeric Keys(0-9): To select c hannelsand input of channel numbers orcharacters.
INFO.: To d isplay the information of thecurrent channel. Icon indicate this keyin OSD menu.
AUDIO:To change the audio track,stereo-mono mode.
GUIDE: (EPG : Elec tronic ProgramGuide)To watch program information. Press oncemore to return to normal mode.
CH LIST: To watch the channel list. Pressto confirm or press EXITto return to
previous chosen channel. Icon
indicate this key in OSD menu.AUX IN: To select the output mode ofsca rt connector.
RECALL: To return to the previous chosenchannel.
9
8
7
6
5
4
3
2
1
QZ- ABC DEF
GHI JKL MNO
PRS TUV WXY
INFO AUDIO
GUIDE CH.LIST
AUX IN
RECALL
TV/RADIO TV/STB
MENU EXIT
CH
VOLVOL
CH
1
3
4
6
8
2
5
7
9
-
8/7/2019 5390 with supp - PDF
14/111
10
QZ- ABC DEF
GHI JKL MNO
PRS TUV WXY
INFO AUDIO
GUIDE CH.LIST
AUX IN
RECALL
TV/RADIO TV/STB
MENU EXIT
CH
VOLVOL
CH
17
19
18
20
MENU: To enter/exit the main menu. Iconindicate this key in OSD menu.
EXIT: To return to previous status or menu.Icon indicate this key in OSD menu.
- Up & Down :To changethe value of a selected item withpreprogrammed values in menu.
- Left & Right :To m ove thecursor up and down in menu. can be
used as a backspace to cancel thenumerical input.
ENTER: To select an item or toconfirm a menu. Pause function.
TV/RADIO: To switch between the TV andradio channels.
TV/STB: To togg le the TV input A/V mode
between the digital STB mode and RFmode.
CAPTIONS: To enab le or disab le subtitle,hot key function.
RATIO: To change screen size(4X3, 16X9),hot key function.
20
19
18
17
16
VOL
VOLVOL1514
CHCH1312
11
10
10 11
14 15
16
12
13
-
8/7/2019 5390 with supp - PDF
15/111
11
QZ- ABC DEF
GHI JKL MNO
PRS TUV WXY
INFO AUDIO
GUIDE CH.LIST
AUX IN
RECALL
TV/RADIO TV/STB
MENU EXIT
CH
VOLVOL
CH
21
22
25
26
24
23
28
27
BLUE : To delete a channel from theChannel List menu. To show extendedprogram information in the EPG menu. Tosee Teletext Service Data. To play orpause the stored programs on HD.WHITE : To add a new channel to theChannel List menu. To stop the p layedprogram s on HD. To d irec t record currentchannel with pause function.
ORANGE(LIST) : To see variant c hannellists for user's convenience in the ChannelList menu. To watch the list of storedprogram s on HD.
SLEEP: To switch off the receiver autom ati-ca lly after between 30 and 150 minutes.
RED : To setup favorite channel lists inthe Channel List menu. To record theprogram on to HD. To delete the storedprograms on HD or set skip points.
GREEN : To loc k channel in theChannel List menu. To show current/nextprogram information in the EPG menu. Toplay the stored programs on HD with fast
rewind mode. Simply set up channel listmode.
YELLOW : To move a channel to otherposition in the Channel List menu. To showprogram schedule information in the EPGmenu. To p lay the stored programs on HDwith fast foward mode. Simply set upfavorite channel list.
: Automa tic power on/off, hot keyfunction.
28
27
26
25
24
23
22
21
-
8/7/2019 5390 with supp - PDF
16/111
12
How to insert a ba ttery
Open the cover at the top of the rear sideof the remote control.
Insert two AAA type batteries(1.5V) to be
aligned with appropriate + /- polarity.Close the c over completely.
When to replace a ba tteryIf the operational range of remote control isgetting smaller, it indicates batteries arealmost consumed.Replace both batteries together.
How to replace a ba ttery
Chec k + /- polarities and insert batteries tobe a ligned with appropriate + /- polarity.
Even if old and new batteries are the samein size, do not use ba tteries with differentcharacteristics.
Acc ident p revention
Do not recharge, heat or disassemble theba ttery. Do not cross + /- polarities.
If remote controller is not going to be usedfor a long time, take the batteries out.
-
8/7/2019 5390 with supp - PDF
17/111
13
The remote controller can be detected by the receiver within an angle of 30degrees to the left or right.The transmission distance of the remote c ontrol is 7m in direct line of sight.
Notes
When the remote control is not op erativeReplace ba tteries with new ones and c heck AC power plug on the receiver.
Abnormal operation
Disturbance from peripheral devices might occur. Ensure that other products whichmight c ause interference a re p laced further away from the receiver.
Notes for handlingIf exposed to heat or water, the ma in body and the remote control may bedamaged, so be careful.
-
8/7/2019 5390 with supp - PDF
18/111
14
COAXIAL
RFLOOPIN
TVANTIN
RFLOOPOUT
RS-232C
RFOUTUHF21-69
OPTICAL S-VIDEO
S/PDIF
COAXIAL
RFLOOPIN
TVANTIN
RFLOOPOUT
RS-232C
RFOUTUHF21-69
OPTICAL S-VIDEO
S/PDIF
-
8/7/2019 5390 with supp - PDF
19/111
15
COAXIAL
RFLOOPIN
TVANTIN
RFLOOPOUT
RS-232C
RFOUTUHF21-69
OPTICAL S-VIDEO
S/PDIF
COAXIAL
RFLOOPIN
TVANTIN
RFLOOPOUT
RS-232C
RFOUTUHF21-69
OPTICAL S-VIDEO
S/PDIF
-
8/7/2019 5390 with supp - PDF
20/111
16
After your receiver is powered up, proceed with installation as follows:
When you plug in AC power, the following will be displayed on the front.
Press POWERon remoc on, the LED number will be displayed as follows;
Screen
1 Menu Language Setting
-
8/7/2019 5390 with supp - PDF
21/111
Press MENUkey and position cursor onLanguage'column with or .
Select language you want with or .
Screen
Note : Lang ua ge s disp layed in 'Lang ua ge' co lumn are suppo rted by your rec eiver.
VOLVOL
CHCH
Main Menu
System Parameters
Installation
Language English
17
-
8/7/2019 5390 with supp - PDF
22/111
If you want to know how to use current part in the menu, usehelp'function.
Select a content in the menu.For example, if you want to know about the installation menu, select installation.
Screen
Press INFO.Then you can see the help window of the selected content.
Screen
2 Help
Main Menu
-Next,
System Parameters
Installation
Language English
Main Menu
-Next,
System Parameters
Installation
Language English
18
-
8/7/2019 5390 with supp - PDF
23/111
You need to check signal state of your receiver.
Press MENUkey.
SelectInstallationwith or , and press .
Screen
CHCH
3 Tuner State
SelectTuner Statewith or and press .
Screen
CHCH
-Next,
Installation
Tuner State
Automatic Full Scan
Manual Scan
Factory Set
Software Download
Tuner State
-Prev.-Main,
Tx Mode
Bandwidth
Guard Interval
Mapping
Auto
7MHz
1/32
64-QAM
CH 7 Auto
184.5 MHzTuner LockFEC ;
Level
59% 75%
Qual.
7/8
19
Note : Enter 4-Digit p a sswo rd if ne ed arise. The de fault pa sswo rd is 0000 .
-
8/7/2019 5390 with supp - PDF
24/111
20
After checkingTuner State, executeAutomatic Full Scan.Then you c an g et a ll program in the pre-programm ed Channels. This function c an alsobe used to get the latest program da ta while receiver is in use.Through this function, the rec eiver searches for all the available p rogram and savesthem in the memory.
Press MENUkey.SelectInstallationwith or , and press .
Screen
CHCH
4 Automatic Full Scan
Installation
Tuner State
Automatic Full Scan
Manual Scan
Factory Set
Software Download
-Next, -Prev.
Selec t thechannelyou want with or .
When thechannelis selected, you can c heck the reception status of the signal. If thereception signal status is bad, adjust antenna to get the following result.
VOLVOL
Tuner Lock FEC 1/2, 2/3, 3/4, 5/6 or 7/8
Level over 30% Quality over 40%
Level Indicating selected channel signal strength level.Quality Indicating signal to noise ratio.
SelectAutomatic Full Scanwith or , and press .
While scanning, you c an see the following menu on the screen.
CHCH
-
8/7/2019 5390 with supp - PDF
25/111
21
Screen
Automatic Full Scan
-Select, -Main,M -Prev.E
Bad
5%
TV: 0 Scanning:2% Radio: 0
366367368369
370371372373374
BBC TWOBBC ONEBBC NEWS 24BBC CHOICE
BBC PARLMNTBBC PARLMNTBBC PARLMNTBBC PARLMNTBBC PARLMNT
CH 7. 184.5 MHz Auto 7 MHz
When scanning is finished, you can see the following menu on the screen.
Screen
After the scanning process, the first program of the last scanned channel will be dis-
played on the back screen.Press , to finish the process. Then selec t a program and press to watc h a pro-
gram or pressMENUkey orEXITkey.
Note : Now you ha ve c omp leted a ll step s need ed for watching programs.If you c ould not see the p rogram a fter finishing the se p roc ed ures,p lea se c onta ct your enginee r or rep resenta tive.
Automatic Full Scan
-Watch, / M -Prev.E-Page Up/Down,
Bad
5%
TV: 20 Scanning:100% Radio: 5
370371372373374
BBC PARLMNTBBC PARLMNTBBC PARLMNTBBC PARLMNTBBC PARLMNT
CH 69. 816.5 MHz Auto 7 MHz
366367368369
BBC TWOBBC ONEBBC NEWS 24BBC CHOICE
Network scan is done.
Press Key.Q
-
8/7/2019 5390 with supp - PDF
26/111
-
8/7/2019 5390 with supp - PDF
27/111
23
While you are watching a program, press or to control volume of the currentchannel.
Note : You c an c onfigure volume o f ea c h cha nnel differently.
Screen
When necessary, pressMUTEkey to remove the sound of the program temporarily.Then, your receiver goes into mute condition and the volume bar will become red.Press MUTEkey again to turn the sound on.
VOLVOL
6 Volume Control
-
8/7/2019 5390 with supp - PDF
28/111
24
You c an set up favorite channel lists as you want.Note : If you p ress yellow key, you can set up favorite c hannel list w ith ou t
channel list me nu.
For example, if you want to set favorite c hannel lists as following.
Favorite1 : BBC Two, KikaFavorite2 : ZDFFavorite3 : ABC Two, ABC OneFirstly, set favorite1 c hannels.
Press CH.LIST.
SelectBBC Two'channel with / or / .
Screen
VOLVOL
CHCH
- - -CH 51. 690.5M Hz
Auto7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
362363369375376377378379
BBC TWOBBC ONEBBC CHOICEKiKaZDFABC TWOABC ONEABC NEWS 24
1 All List
-Watch, -EXIT, ~ -Move0 9-Main,-Page Up/Down, /
1 Favorite Channel
-
8/7/2019 5390 with supp - PDF
29/111
25
Press RED.
Screen
- - -CH 51. 690.5MHz
Auto
7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
362363369375376377378379
BBC TWOBBC ONEBBC CHOICEKiKaZDFABC TWOABC ONEABC NEWS 24
1 All List
-Select, -Exi t, / -Rename
Favorite State
Favorite 1
Favorite 2
Favorite 3
Favorite 4
Favorite 5
Select favorite1 with or and Press .
Screen
CHCH
- - -CH 51. 690 .5MHz
Auto7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
362363369375376377378379
BBC TWOBBC ONEBBC CHOICEKiKaZDFABC TWOABC ONEABC NEWS 24
1 All ListFavorite State
Favorite 1
Favorite 2
Favorite 3
Favorite 4
Favorite 5
-Se lect, -Exi t, / -Rename
-
8/7/2019 5390 with supp - PDF
30/111
26
Screen
Do the sam e for theKika'channel.
Screen
- - -CH 51. 690.5MHz
Auto7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
362363369375
376377378379
BBC TWOBBC ONEBBC CHOICEKiKa
ZDFABC TWOABC ONEABC NEWS 24
1 All List
-Watch, -Exit, ~ -Move0L/ 9-Main,-Page Up/Down,
FACTS TestCH 45. 650.0 MHz
Auto7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
362363369375376377378379
BBC TWOBBC ONEBBC CHOICEKiKaZDFABC TWOABC ONEABC NEWS 24
1 All List
-Watch, -Exit, ~ -Move0L/ 9-Main,-Page Up/Down,
-
8/7/2019 5390 with supp - PDF
31/111
27
Press RED.
Screen
Press .
Screen
Favorite1~ Favorite5 are default nam e. Users can renam e them for their convenience.If you want to renameFavorite1'(for examp leDrama').
FACTS TestCH 45. 650.0 MHz
Auto
7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
362363369375376377378379
BBC TWOBBC ONEBBC CHOICEKiKaZDFABC TWOABC ONEABC NEWS 24
1 All ListFavorite State
Favorite 1
Favorite 2
Favorite 3
Favorite 4
Favorite 5
-Selec t, -Exi t, / -Rename
FACTS TestCH 45. 650.0 MHz
Auto7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
362363369375376377378379
BBC TWOBBC ONEBBC CHOICEKiKaZDFABC TWOABC ONEABC NEWS 24
1 All List
-Watch, -EXIT, ~ -Move0 9-Main,-Page Up/Down, /
-
8/7/2019 5390 with supp - PDF
32/111
Press RED.
Screen
FACTS TestCH 45. 650.0 MHz
Auto
7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
362363
369375376377378379
BBC TWOBBC ONE
BBC CHOICEKiKaZDFABC TWOABC ONEABC NEWS 24
1 All List
-Se lect, -Exi t, / -Rename
Favorite State
Favorite 1
Favorite 2
Favorite 3
Favorite 4
Favorite 5
SelectFavorite 1with or .
Screen
CHCH
FACTS TestCH 45. 650.0 MHz
Auto7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
362363369375376377378379
BBC TWOBBC ONEBBC CHOICEKiKaZDFABC TWOABC ONEABC NEWS 24
1 All List
-Se lect, -Exi t, / -Rename
Favorite State
Favorite 1
Favorite 2
Favorite 3
Favorite 4
Favorite 5
28
-
8/7/2019 5390 with supp - PDF
33/111
Press WHITE.
Screen
FACTS TestCH 45. 650.0 MHz
Auto
7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
362363
369375376377378379
BBC TWOBBC ONE
BBC CHOICEKiKaZDFABC TWOABC ONEABC NEWS 24
1 All List
-Select, -Exit , / -Rename
Favorite State
Favorite 1
Favorite 2
Favorite 3
Favorite 4
Favorite 5
Screen
Press MENU, EXITor to finish the proc ess.
You have finished favorite1 channel setting.With similar way, you can set fa vorite2~ favorite5 channel list.You c an use these fa vorite c hannel lists by usingORANGEkey.Refer to the next section for detail.
VOL
VOLVOLVOLVOLVOLVOLVOLVOL
FACTS TestCH 45. 650.0 MHz
Auto7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
362363369375376377378379
BBC TWOBBC ONEBBC CHOICEKiKaZDFABC TWOABC ONEABC NEWS 24
1 All ListFavorite State
DRAMA
Favorite 2
Favorite 3
Favorite 4
Favorite 5
-Se lect, -Exi t, / -Rename
29
-
8/7/2019 5390 with supp - PDF
34/111
30
If you have set up favorite channel lists as the previous section, you can use them as fol-lowing.
Press CH.LIST.
Screen
Using this function, you c an see variant c hannel lists which may enable you to edit andselec t channels more conveniently.
Note : If you press green key, you can set up c hannel list mo d e w itho ut c hannel list menu.
- - -CH7. 184.5 MHz
Auto7MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
350351352353354355356357
ABC TWOABC ONEABC NEWS 24ABC CHOICEDarwin TWODarwin ONEBBC NEWS 24BBC CHOICE
1 All List
-Watch, -EXIT, ~ -Move0 9-Main,-Page Up/Down, /
2 Channel List Mode
Favorite Mode
-
8/7/2019 5390 with supp - PDF
35/111
31
Press ORANGE.
Screen
- - -CH 7. 184.5 MHz
Auto
7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
350351352353354355356357
ABC TWOABC ONEABC NEWS 24ABC CHOICEDarwin TWODarwin ONEBBC NEWS 24BBC CHOICE
1
-Exit / / -Select,
All ListAll List
A B
Channel List Mode
Favorite
Network
Alphabet
Favorite 1
Australia
A
You can seeChannel List Mode'window. SelectFavorite'with or andselect Favorite1'with or .
Screen
VOLVOL
CHCH
- - -CH 7. 184.5 MHz
Auto7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
350351352353354355356357
ABC TWOABC ONEABC NEWS 24ABC CHOICEDarwin TWODarwin ONEBBC NEWS 24BBC CHOICE
1
-Exit / / -Select,
All ListAll List
A B
Channel List Mode
Favorite
Network
Alphabet
Favorite 1
Australia
A
-
8/7/2019 5390 with supp - PDF
36/111
-
8/7/2019 5390 with supp - PDF
37/111
33
Select D' with or .
Screen
VOLVOL
FACTS[CH 43] 650.0 MHz
Auto
8 MHzFACTS
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
D
350351352353354355356357
ABC TWOABC ONEABC NEWS 24ABC CHOICEDarwin TWODarwin ONEBBC NEWS 24BBC CHOICE
-Exit / / -Select,
All List
A B
Channel List Mode
FavoriteNetwork
Alphabet
Favorite 1Australia
D
Using this function, you can see the c hannel list which have same initial. This function isuseful when you search specific channel among the list of thousands channels.For example, if you want to see the channel lists which start withD'.
Press ORANGEin the channel list and selec tAlphabet'with or .
Screen
CHCH
FACTS[CH 43] 650.0 MHz
Auto8 MHzFACTS
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
D
350351352353354355356357
ABC TWOABC ONEABC NEWS 24ABC CHOICEDarwin TWODarwin ONEBBC NEWS 24BBC CHOICE
-Exit / / -Select,
All List
A B
Channel List Mode
Favorite
Network
Alphabet
Favorite 1
Australia
A
Alphabet Mode
-
8/7/2019 5390 with supp - PDF
38/111
34
By using this function, you c an see all channel list of the selec ted Network.
Press ORANGEand selectNetworkitem with or and press .
Screen
CHCH
- - -CH 41. 620.5 MHz
Auto7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
All List
361355354
DWtvDarwin ONEDarwin TWO
A B
-Exit / / -Select,
DD
A B
Channel List Mode
Favorite
Network
Alphabet
Favorite 1
Australia
D
Network Mode
Press .
Screen
You can see the channel list where all channels have initialD'.
- - -CH 41. 620.5 MHz
Auto
7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
D
361355
354
DWtvDarwin ONE
Darwin TWO
A B
-Watch, -EXIT, ~ -Move0 9-Main,-Page Up/Down, /
-
8/7/2019 5390 with supp - PDF
39/111
-
8/7/2019 5390 with supp - PDF
40/111
-
8/7/2019 5390 with supp - PDF
41/111
Screen
If you want to cancel the channel lock, go to the channel list and select the channeland press GREEN.
376 ZDF hh:mm
-- : -- ~ -- : --((( ( ( (1/?
Information
You can organize the number or sequence of the channels.
Press CH.LIST.
Screen
- - -CH 41. 620.5 MHz
Auto7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
All List
-Watch, -EXIT, ~ -Move0 9-Main,-Page Up/Down, /
362
363369375376377378379
BBC TWO
BBC ONEBBC CHOICEKiKaZDFABC TWOABC ONEABC NEWS 24
4 Channel Order Setting
37
-
8/7/2019 5390 with supp - PDF
42/111
-
8/7/2019 5390 with supp - PDF
43/111
39
Press YELLOW.
Screen
Press MENU, EXITor to finish the process.
---CH 61. 760.5 MHz
Auto
7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
All List
-Watch, -EXIT, ~ -Move0 9-Main,-Page Up/Down, /
362363375376369377378379
BBC TWOBBC ONEKiKaZDFBBC CHOICEABC TWOABC ONEABC NEWS 24
5 Delete Channel You c an d elete c hannels from the channel list.
Press CH.LISTand selec t the channel you want to remove with / or /.
Screen
VOL
VOL
CHCH
FACTS TestCH 45. 650.0 MHz
Auto7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
All List
-Watch, -EXIT, ~ -Move0 9-Main,-Page Up/Down, /
362363375376369377378379
BBC TWOBBC ONEKiKaZDFBBC CHOICEABC TWOABC ONEABC NEWS 24
-
8/7/2019 5390 with supp - PDF
44/111
40
Press BLUE.Note : If pa sswo rd' windo w is risen a s follow ing pic ture, enter pa sswo rd with
nume ric keys (default p a sswo rd is' 0000'). Then you can de lete the cha nnel. If you do n't w ant this windo w, c hang e Parental Con trol' set up in the System Param ete rs' menu. Refer to the 'Parenta l co ntrol' in System param ete rs' in this ma nua l for de tail.
Screen
Then, you need to confirm the deletion. If you definitely want to de lete, press .If not, p ressEXIT.
Screen
Note : Plea se b e c areful when you d elete c hannel(s).
Press MENU, EXITor to finish the process.
- - -CH 45. 650.5 MHz
Auto7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
All List
-Watch, -EXIT, ~ -Move0 9-Main,-Page Up/Down, /
362363375369377378379380
BBC TWOBBC ONEKiKaBBC CHOICEABC TWOABC ONEABC NEWS 24ABC CHOICE
PASSWORD
????
- - -CH 45. 650.5 MHz
Auto7 MHz
FAV. DEL.
LOCK ADD
MOVE MODE
TV Channel List
All List
-Watch, -EXIT, ~ -Move0 9-Main,-Page Up/Down, /
362363375369377378379380
BBC TWOBBC ONEKiKaBBC CHOICEABC TWOABC ONEABC NEWS 24ABC CHOICE
All ListDo you want to delete this channel?
Yes / NoQ
-
8/7/2019 5390 with supp - PDF
45/111
-
8/7/2019 5390 with supp - PDF
46/111
42
This sub-m enu allows you to set the age for pa renta l loc king and protect children fromviewing programs unsuitable for their age.
Press MENUkey.
Press or to selec tSystem Parameters'and press .
Screen
Press or to selec tParental Control'and press .
Screen
CHCH
CHCH
System Parameters
-Next, -Prev. /
DL Saving
TV Type
Aspect Ratio
Screen
A/V Mode
RF type
RF Channel
CVBS
PAL-G
46
No
MULTI
4x3
P/S
Parental Control
System Information
Local t ime/Timer dd/mm/yyyy hh:mm
System Parameters
-Next, -Prev. /
DL Saving
TV Type
Aspect Ratio
Screen
A/V Mode
RF type
RF Channel
CVBS
PAL-G
46
No
MULTI
4x3
P/S
Parental Control
System Information
Loc al ti me/Timer d d/m m/ yy yy hh :m m
PASSWORD
????
1 Setting Age Restrictions
-
8/7/2019 5390 with supp - PDF
47/111
43
Enter 4-digit password.Note : The de fault pa sswo rd is '0000' .
Screen
Press or to selectAge Limit.
Screen
CHCH
System Parameters
-Next, -Prev. /
DL Saving
TV Type
Aspect Ratio
Screen
A/V Mode
RF type
RF Channel
CVBS
PAL-G
46
No
MULTI
4x3
P/S
Parental Control
System Information
Local t ime/Timer dd/mm/yyyy hh:mm
PASSWORD
>****
Parental Control
-Prev.-Main,
Age Limit
Lock Channel Editing
Lock Installation
New Password
Verify Password
Personal
No Block
No
No
????
????
SRT-5390
Press or to selec t ag e you want.
Note : Age limit c an be ap plica ble o nly for the signal which c arries age limit information.
VOLVOL
No Block No age limit Block all Block AllG General PG Parental Guidance RecommendedM Mature Audience 15+ MA Mature Adult Audience 15+AV Audience, Strong Violence 15+ R Restricted 18+
-
8/7/2019 5390 with supp - PDF
48/111
-
8/7/2019 5390 with supp - PDF
49/111
-
8/7/2019 5390 with supp - PDF
50/111
46
Press or to selec tLocal Time/Timer, and press .Note : Withou t the lo c al time se tt ing, this TIMER func tion d oes not w ork.
Screen
CHCH
06/08/2003 01:53
Timer
Timer #1Timer #2
Timer #3
Timer #4
Timer #5
Timer #6
Timer #7
-Prev. /
CH. TypeCH. Number
CH. Name
Start Time
Stop Time
Status
HD record
TV7
7 Digital
06/08/2003 01:55
06/08/2003 02:55
No
ON
You can pre-set the on/off time of your receiver.During your absence, you can record programs on your VCR.
Press MENUkey.
Press or to selec tSystem Parameters, and press .
Screen
CHCH
5 Setting Timer (Automatic power On/Off)
System Parameters
-Next, -Prev. /
DL Saving
TV Type
Aspect Ratio
Screen
A/V Mode
RF type
RF Channel
CVBS
PAL-G
46
No
MULTI
4x3
P/S
Parental Control
System Information
Local time/Timer 0 2/ 07 /2 00 1 0 6:3 4
-Edit,~0 9
-
8/7/2019 5390 with supp - PDF
51/111
-
8/7/2019 5390 with supp - PDF
52/111
-
8/7/2019 5390 with supp - PDF
53/111
49
You can set video output mode for 2 scart connec tors on the rear panel for true videoquality.
Press MENUkey.
Press or to selectSystem Parameters, and press .
Press or to selectA/V Mode.
Press or to selec tCVBS, Y/C, RGB.VOLVOLCHCH
CHCH
Note : 1. If you selec t L.Box , the screen might b e distorte d. Upp er and lower p art of the screen w ill be b locked with bla ck stripes.
2. Scree n func tion is help ful whe n rece iving 16 x 9 signal w ith TV of 4x3 forma t.
You can select the terrestrial input signal display mode.
Press MENUkey.
Press or to selectSystem Parameters, and press .
Press or to selectScreen.
Press or to selec tP/SorL. Box.VOLVOLCHCH
CHCH
P/SWhen you set screen display boundary from Pan/Scan data ofSate llite input signal. (For signal for 16x9 program )
L.BoxYou can watch 16 x 9 ratio screen by reducing original size verticallyand horizontally.
CVBS Video out signal from TV, AUX scart will be com posite.Y/C Video out signal from TV, AUX scart will be Y, C.
RGBVideo out signal from TV scart will be output as RGB. Video out signalfrom AUX scart will be CVBS.
9 Setting Screen
10 Setting Scart Video Output mode
-
8/7/2019 5390 with supp - PDF
54/111
50
After checkingTuner State,when necessary, you can ed it parameters of certain channelsand scan them.
PressMENUkey.
SelectInstallationwith or , and press .
Screen
SelectManual Scanwith or , and press .
Screen
CHCH
CHCH
Installation
-Next, -Prev.
Tuner State
Automatic Full Scan
Manual Scan
Factory Set
Software Download
Manual Scan
-Select, -Prev.-Main,
CH 7
184.5 MHz
Auto
High
7MHz
Bad
5%
Channel
Frequency
Tx Mode
Priority
Bandwidth
Scan
-
8/7/2019 5390 with supp - PDF
55/111
-
8/7/2019 5390 with supp - PDF
56/111
52
After scanning process, the first channel of scannedchannelwill be displayed.
Screen
Note : If the scan fails, plea se c hec k whe ther your entered values are c orrec t or not and the signal rec ep tion sensitivity is go od or ba d.
Manual Scan
Good
50%
TV: 4 Success Radio: 0
370371372373374
BBC PARLMNTBBC PARLMNTBBC PARLMNTBBC PARLMNTBBC PARLMNT
FACTS Test CH 45. 650.0 MHz Auto 7 MHz
-Watch, -Prev. / -Page Up/Down,
1220200350351352353
FACTS HD Test..FACTS SD Test..FACTS SD Test..FACTS SD Test..BBC TWOBBC ONEBBC NEWS 24BBC CHOICE
-
8/7/2019 5390 with supp - PDF
57/111
-
8/7/2019 5390 with supp - PDF
58/111
54
Software Download function enables user to download and update new program from air.
PressMENUkey.
SelectInstallationwith or , and press .
To start receiving the da ta through air, press onSoftware Download'.
It takes a few minutes to search the group of programs & downloaded channel.Move to next Menu if you succeed in searching the necessary information.
The explanations forSoftware Download'menu are as follow,- Start :Starting downloading the selected da ta.- Display info :Displaying the updated contents & other text information.- Main SW :Select whether you would update the main program of Receiver or not.- Ch List :Select whether you would update the channel list of Receiver or not.- Info :Select whether you would watch the updated contents & other informa tion of this
version or not.
If you selectStart', it starts downloading selected da ta.On finishing the download, if necessary, Receiver is restarted.
Note : 1. Do not turn o ff the Power, while upg rading Rec eiver.2. This servic e is no t p rovid ed yet.
CHCH
-
8/7/2019 5390 with supp - PDF
59/111
55
Press TV/STB.The signa l recep tion p ath will change to RF modulator andTV/STBLED on front panel will be lit.
The signal output through the RF modulator will be as follows :
1 TV / STB switching
You can use this menu when you change a TV channel to a Rad io channel or viceversa.
Press TV/RADIO.
When listening a radio channel,r001will be displayed on the front panel.
2 TV / RADIO switching
TV/STB LED DC Power ON DC Power OFF(Standby)
ON RF IN signal will be out.
OFF Decoded signal will be out through RF. RF IN signal will be out.
-
8/7/2019 5390 with supp - PDF
60/111
-
8/7/2019 5390 with supp - PDF
61/111
57
Selec t Channel with or .Then you c an see current or next program information of the selected channel.
If you pressGREEN, current or next program information would be converted to nextor current program information respectively.
Screen
CHCH
Program Guide
10:45
10:30 11:00
CurrentPEOPLE AND POLOTOCS
465466467468469470471472
CNN TURKGenc TvFashion TvNumber OneDiscovery TurDWtvNNTVE
PEOPLE AN..
-Schedule, -Extended, -List Mode-Current/Next,
Program Guide
10:45
09:00 09:30
NextJOURNAL
465466467468469
470471472
CNN TURKGenc TvFashion TvNumber OneDiscovery Tur
DWtvNNTVE
JOURNAL
-Schedule, -Extended, -List Mode-Current/Next,
-
8/7/2019 5390 with supp - PDF
62/111
If you pressYELLOW, you can see program schedule list of the selected channel.
Screen
Program Guide
10:46[470] DWtv10:30~11:00
09:00~09:30
09:30~10:00
10:00~10:30
10:30~11:00
11:00~11:30
11:30~12:00
12:00~12:30
PEOPLE AND POLITICS
JOURNAL
IM FOCUS
JOURNAL
ART & UNLIMITED
JOURNAL
EUROMAXX
JOURNAL
-Schedule, -Extended, -Reserve-Current/Next,
28/08/2003 10:30~11:00PEOPLE AND POLITICS
If you want to see program information of a program in the program schedule list,selec t the program with or .Then you can see the program information in the right window.
Screen
CHCH
Program Guide
10:46
[470] DWtv10:30~11:0009:00~09:30
09:30~10:00
10:00~10:30
10:30~11:00
11:00~11:30
11:30~12:00
12:00~12:30
PEOPLE AND POLITICS
JOURNAL
IM FOCUS
JOURNAL
ART & UNLIMITED
JOURNAL
EUROMAXX
JOURNAL
-Schedule, -Extended, -Reserve-Current/Next,
25/08/2003 10:00~10:30JOURNAL
58
-
8/7/2019 5390 with supp - PDF
63/111
If you pressBLUE, you can see extended program information of the selected pro-gram.
Screen
You can set up automatic power on-off (Timer) or automatic recording on the pro-gram schedule list. After pressYELLOWin the Guide( EPG) menu, selec t a programwith / or / and press .
SelectOnce/Daily/Weekly/No'of Status'with or .VOLVOL
VOLVOL
CHCH
Program Guide
10:47
[470] DWtvNews, Business, Top Story, Weather
-Schedule, -Extended,-Current/Next,
25/08/2003 10:00~10:30JOURNAL
-Page Up/Dn
SelectHD record 'and set ON'with it you want to record automa tica lly.
Screen
Program Guide
06:47
[9] Nine Digital08:30~09:0009:00~09:30
-- : - -
- - : - -
- - : - -
- - : - -
- - : - -
- - : - -
THE PRICE IS PICHT
-ExitE-Reserve,
25/08/2003 10:00~09:00JOURNAL
06/08/2003 08:29
Timer
Status
HD record
Once
ON
~ 06/08/2003 09:05
59
-
8/7/2019 5390 with supp - PDF
64/111
60
Screen
PressMENU, EXITor to finishGUIDEmenu.
Screen
Note : 1. Withou t 'STATUS' being ac tua ted (Yes), 'Timer ' does no t work.2. If a program of p rior time than c urrent time ('Loca l Time' in 'System
Param eters' menu) is selec ted , Timer does no t work.3. Refer to 'Sett ing Timer ' in 'System Paramete rs' in this manua l.
Program Guide
06:47
[9] Nine Digital08:30~09:0009:00~09:30
-- : - -
- - : - -
- - : - -
- - : - -
- - : - -
- - : - -
THE PRICE IS PICHT
-ExitE-Reserve,
25/08/2003 10:00~09:00JOURNAL
06/08/2003 08:29
Timer
Status
HD record
Once
ON
~ 06/08/2003 09:05
Program Guide
06:47
[9] Nine Digital08:30~09:0009:00~09:30
-- : - -
- - : - -
- - : - -
- - : - -
- - : - -
- - : - -
THE PRICE IS PICHT
-ExitE-Reserve,
25/08/2003 10:00~09:00JOURNALReserved at Timer #1
!
-
8/7/2019 5390 with supp - PDF
65/111
-
8/7/2019 5390 with supp - PDF
66/111
Subtitle Track(Subtitle language # ) of (all subtitle language available in thisprogram) [ Current selected subtitle language ]
Audio Track(Audio trac k #) of (all trac ks availab le in this program ) [spokenlanguage in this program ]
Audio Mode Stereo -> Mono-Left -> Mono-RightDig.Output MPEG STEREO / Dolby Digital (AC 3)
Note : These subtitle and a udio p arame ters are workab le only when the receiving c hannel supp ort s these func tions.
Your receiver will automatically power-off when the time you set is pa ssed.
Press SLEEPkey until the right time you want appears.
Screen
Note : 1. You can set SLEEP TIMER in 30 minute steps up to 150 minutes.2. The SLEEP TIMER does not work while you are in MENU , GUIDE or
CHANNEL LIST.
5 Sleep Timer
150
The contents of each pa rameter are as follows ;
62
-
8/7/2019 5390 with supp - PDF
67/111
You c an set in/out m ode of the two sca rt connectors (TV, AUX) on the rear pa nel.Press Aux inkey until the scart mode you want is displayed.
Screen
6 Aux in
Screen
63
-
8/7/2019 5390 with supp - PDF
68/111
64
Screen
Input terrestrial signa l will be outp ut to TV Scart and AUX (VCR) Scart. ( canconnect VCR to AUX connector for recording )Input signal from AUX scart connector will be output to TV scart. If there isno input from AUX scart, your receiver will work as if you chose STB mode.Input signal from AUX scart connector will be output to TV scart by force.Input signal from TV scart connector will be output to AUX scart. (Only forCVBS)
STB
AUX
AUX 2
TV
Note : You c annot see p icture when set to AUX 2 mo de a nd there is no input signal from outside.
-
8/7/2019 5390 with supp - PDF
69/111
65
Brief information is displayed, such as current channel type, name, local start/end time,guide information, current time, fav/norma l mode, Audio mode and Audio ID.
Press INFO, then the informa tion bar will pop-up.
Screen
Note : If you have no informa tion : - Chec k your loc al time sett ing is co rrec t.- Informa tion is not sent by the channel p rovider.
7 Channel / Information
200 FACTS SD Test.. 06:32
10:15 ~ 10:21((( ( ( (1/2
FACTS Test
-
8/7/2019 5390 with supp - PDF
70/111
Hot-Key Captions On/OffIf there is cap tions in stream, you can see cap tion d ata by Caption Hot-Key.
Screen
8 Captions
If there is no c aptions in strea m, You c ae seeNoneTitle Bar.
Screen
None
66
-
8/7/2019 5390 with supp - PDF
71/111
Hot-Key for Aspec t Ratio ChangeBy Ratio Hot-key you can selec t aspect ratio.
Screen
9 Ratio
4 x 3 Letter Box
Hot-Key for Timer functionIf you press this key, you c an setting Timer function direc tly.
Screen
10
06/08/2003 01:53
Timer
Timer #1
Timer #2
Timer #3
Timer #4
Timer #5
Timer #6
Timer #7
-Prev. /
CH. Type
CH. Number
CH. Name
Start Time
Stop Time
Status
HD record
TV
7
7 Digital
06/08/2003 01:55
06/08/2003 02:55
No
ON
67
-
8/7/2019 5390 with supp - PDF
72/111
68
You can record the current channel by pressingRED( )key.
Direct Recording
PressRED( )key only once.Starting record current channel on the spot.
Screen
Note : While a prog ram is recorded , if you press INFO or key, red R- ico n is disp layed informa tion bar. Thoug h you wa tch not only the current rec ording cha nnel but also the other previous rec ording cha nnel.
SEVEN MORNING NEWS
00:00:13 / 00:00:17
((( ( ( (S
2
Stereo
R
1 Start Recording
-
8/7/2019 5390 with supp - PDF
73/111
69
Manual Recording
PressRED( )key twice.(Double click)
Program Guide menu appeared with recording dialog menu.
You can edit channel name and information.
Screen
You can change the record stop time with numerical key.
Using or to change the record stop time in 30 minutes intervals.VOLVOL
Program Guide
00:51
Current77071727377
7 Digital77777
25/0NING NEWS
00:35 02:05
Name
Information
Start
Stop
REC
7 Digital 1
SEVEN MORNIN..
00:51
02:51
-Record, -Exit,E ~0 -Edit9
-
8/7/2019 5390 with supp - PDF
74/111
70
Press key to start recording.
Screen
Program Guide
00:51Current7
7071727377
7 Digital seven morn77777
25/0NING NEWS
00:35 02:05
REC
-Record, -Exit,E ~0 -Edit9
Name
Information
Start
Stop
7 Digital 1
SEVEN MORNIN..
00:51
0 2:51
Program Guide
00:51
Current77071727377
7 Digital seven morn77777
25/0NING NEWS
00:35 02:05
REC
-Record, -Exit,E ~0 -Edit9
Name
Information
Start
Stop
7 Digital 1
SEVEN MORNIN..
00:51
00:5 0
Note : Defau lt rec ording dura tion time is set for 2 hours. You can set rec ording dura tion 23hours 59 minute s ma xima lly
Screen
-
8/7/2019 5390 with supp - PDF
75/111
71
Reserve Recording You can reserve recording by means of a timer function. please refer to the section7.3.5 Setting Timer.
You can reserve recording by means of EPG function. please refer to the section7.7.3 GUDIE(EPG).
After the time, which is either given by the EPG or set by you, the recording automaticallystops. And the HD Program Guide menu appears. By pressingORANGE(LIST)orEXITkeyyou can return to live channel.
Note : After rec ord stop pe d, the receiver have not any co mma nd for 5 min- ute s. Then the receive r will go autom a tically pow er off.
If you want to stop recording by force, you must enter HD-Program Guide menu.
If any program has been p layed, pressORANGE(LIST)key to enter HD-Program Guidemenu.
Screen
HD-Program Guide
-Delete, -Terrestrial Mode / -Watch,
06:49
13:13
14:27
04:16
REC
Title
Play time: REC
00/00/0000 00:00
Free:37.9 GB (49.6%)
THE PRICE IS RIGHT
Play Type
1
2
3
4
This is BBC CHOICE
This is BBC CHOICE
This is BBC CHOICE
THE PRICE IS RIGHT
R
2 Stop Recording
-
8/7/2019 5390 with supp - PDF
76/111
HD-Program Guide menu is displayed, pressORANGE(LIST)once again orEXITkey.
Screen
You will be asked if you would like to stop the recording. Confirm selec tion by press-ing key or cancelEXITkey.
HD-Program Guide
-Delete, -Terrestrial Mode / -Watch,
06:49
13:13
14:27
04:16
REC
Title
Play time: REC
02/07/2001 06:49
Free:37.7 GB (49.4%)
THE PRICE IS RIGHT
Play Type
1
2
3
4
This is BBC CHOICE
This is BBC CHOICE
This is BBC CHOICE
THE PRICE IS RIGHT
R
Do you want to stop recording?
Yes / Q
No E
72
-
8/7/2019 5390 with supp - PDF
77/111
You must select a program to play stored programs.For entering HD-Program Guide menu, pressORANGE(LIST)key.
PressORANGE(LIST)key.
In HD-Program Guide, selec t a program by pressing or .
Screen
Press to start playing.
Note : For con trolling trick p lay mo de, you must press or INFO key then HD-Informa tion Bar will pop -up.
CHCH
HD-Program Guide
-Delete, -Terrestrial Mode / -Watch,
06:50
13:13
14:27
04:16
00:02
Title
Play time: 04:16
13/09/1999 13:45
Free:37.7 GB (49.4%)
This is BBC CHOICE
Play Type
1
2
3
4
This is BBC CHOICE
This is BBC CHOICE
This is BBC CHOICE
THE PRICE IS RIGHT
1 Start Playing
73
-
8/7/2019 5390 with supp - PDF
78/111
74
For using trick play mode, you must press orINFOkey then HD-Information Bar willpop-up.
Screen
Trick Play Mode : Pause, Jump, Fast Forward, Fast Reverse, Resume.
- Pause PressBLUE .
- Jump PressBLUE .
PressYELLOW orGREEN .
PressBLUE .
- Fast Forward PressYELLOW .
- Fast Reverse PressGREEN .
- Stop PressWHITE .
2 BBC CHOICE
00:00:28 / 86:27:07
This is BBC CHOICEStereo
((( ( ( (S
2 Trick Play Controls
HD Playing HD Paused
YELLOW Fast Forward Jump Forward
GREEN Fast Reverse Jump Backward
BLUE Pause Resume
WHITE Stop StopINFOor Info On/Off Info On/Off
RED slow play slow play
-
8/7/2019 5390 with supp - PDF
79/111
-
8/7/2019 5390 with supp - PDF
80/111
76
If you want to lock any program, enter the advanced menu by pressingMENUkey with HD-Information Bar.After locking a program, you must enter the password for playing the program.
Start playing a program.
Press then HD-Information Bar will pop -up.
PressMENUkey, the advanced menu will pop-up.
Screen
SelectLOCKusing or .
Press , LOCK enable or disable will be setted with Yes or No.
Note : The p a sswo rd for play ing a stored prog ram is the sam e p a sswo rd for any other loc k op era tion.
CHCH
LockClear skip pointsSplit take
No
2 BBC CHOICE
00:01:40 / 86:27:07
This is BBC CHOICEStereo((( ( ( (S
-
8/7/2019 5390 with supp - PDF
81/111
77
You can set the part you dont want to play, such as advertise ments.The skip part consists of start and end points.In all, 10 skip points are available.
Selec t a program with or , and press to play in HD-Program Guide menu.
Start playing and search the start point of skip p lay you want using trick play controls.
PressRED( )key to set the start point.
Screen
Temperary start point will be displayed with a red pointer on the Bar.
PressRED( )key to set the end point you want.
CHCH
2 BBC CHOICE
13:15:01 / 86:27:07
This is BBC CHOICEStereo((( ( ( (S
-
8/7/2019 5390 with supp - PDF
82/111
-
8/7/2019 5390 with supp - PDF
83/111
79
You can split a program in two programs.The operation takes a few minutes to complete splitting.
Selec t a program with or , and press to play in HD-Program Guide menu.
Search the split point you want using trick play controls.
PressMENUkey, then the advanced menu will pop-up.Screen
SelectSpli t takemenu and press , then Split take dialog will pop-up .
Screen
CHCH
5 Nine Digital
00:00:04 / 00:00:30
THE PRICE IS RIGHTStereo((( ( ( (S
LockClear skip pointsSplit take
No
5 Nine Digital
00:00:23 / 00:00:30
THE PRICE IS RIGHTStereo((( ( ( (S
LockClear skip pointsSplit take
No
Split this program in two ?
Yes / Q
No E
-
8/7/2019 5390 with supp - PDF
84/111
80
Press to start splitting orEXITkey to void.
If split operation starts, the p rogress window will pop-up and you can see the status ofprocess.
Screen
After splitting, HD-Program Guide menu will pop-up and splitted program will be select-ed.
Screen
HD-Program Guide
-Delete, -Terrestrial Mode / -Watch,
06:49
13:13
14:27
Title
Play time: 14:27
13/09/1999 13:45
Free:71.6 GB (93.8%)
This is BBC CHOICE
Play Type
1
2
This is BBC CHOICE
This is BBC CHOICE
RNow splitting program
5%
HD-Program Guide
-Delete, -Terrestrial Mode / -Watch,
07:00
13:13
00:01
14:26
Title
Play time: 14:26
13/09/1999 13:45
Free:71.4 GB (93.5%)
This is BBC CHOICE
Play Type
1
2
3
This is BBC CHOICE
This is BBC CHOICE
This is BBC CHOICE
-
8/7/2019 5390 with supp - PDF
85/111
81
You can use trick play controls without HD-Information Bar.Small yellow icon will be displayed for trick play controls.Additional play control is available in this mode.This function is activated at pause state usingGREEN( ) / YELLOW( ). and make thesequence played step by step.
Selec t a program with or , and press to play in HD-Program Guide menu.Press INFOor to turn off HD-Information Bar.
PressBLUE( ), GREEN( )orYELLOW( )to start controlling trick play without anyOSD.
You c an control trick play while yellow icons are d isplayed.
Besides, you can control step by step play withGREEN( ) / YELLOW( )while pausestate.
Note : You c an no t control jump p lay w ithou t HD-Informa tion Bar.
CHCH
-
8/7/2019 5390 with supp - PDF
86/111
82
Hot-Key for direc t recording and pa use function.You can immediately record the current channel.And replay the p icture a s you want.
Press white key.
Current c hannel recording starts with pause the pic ture.(Time-shift fuction starting)
Screen
If you press blue key the p icture will rep lay.
Note : Refe r to 8.2.2 Trick Pla y Cont rols &8.7 Trick Pla y Cont rols witho ut OSD in this manual.
4 Nine Digital
00:00:00 / 00:00:12
THE PRICE IS RIGHTStereo((( ( ( (S
R
-
8/7/2019 5390 with supp - PDF
87/111
83
Remedy
Check the main power cable isplugged into a power outlet.
Check the main power switch in therear panel.
Check the video cable(RCA, SCART)
Chec k the video input mode of the TV.
If your STB is set to the AUX2 mode, youcant see video. Press AUX IN key onc eor more.(See page64)
If you are using RCA cable, check theaudio input/output terminal.
Chec k the volume level of the TV andSTB. Check the mute function of the TVand STB.
Connect antenna cable correctly.
Check the tuner state of STB. If signa llevel is weak, adjust the aerial anten-na.
Check the broadcasting video formatin your TV and STB.(NTSC/PAL)Set to the same mode.(CVBS, RCB,Y/C)
Change the batteries.Aim the remote c ontrol at the receiver.
Possible causes
AC Power is disconnected.
Wrong connection from the STBvideo output to the TV input ter-minal.Wrong setting of the TV inputmode.Wrong setting of the STB videooutput mode .
Wrong connection from the STBaud io output to the TV input ter-minal.Volume level of the TV and STB islow.
Wrong c onnec tion of the anten-na cab le.Signa l level is low.
TV or STB mode is different fromthe broadcasting mode.The STB A/V output mode is dif-ferent from the TV.
Battery exhausted.Remote controller is incorrec tlyaimed.
Problem
LED on front paneldoes not light.
No Picture
No sound
On screen displayedBad or no signal
Black and whitescreen or V-Hold.
The remote control unitis not working.
There may be various reasons for the abnormal operation of the unit. Therefore, if the unit does notwork properly, check it according to the p rocedures shown in the table below :
-
8/7/2019 5390 with supp - PDF
88/111
84
IEC 169-2, female/male
Input :170MHz~ 860MHz
Loop through out : 50MHz~ 860MHz
7MHz
COFDM
QPSK, 16QAM, 64QAM
2K, 8K, Auto
1/4, 1/8, 1/16, 1/32, Auto
Auto conversion
IEC 169-2, female/male
470~ 860MHz
UHF 21~ 69
32bit Processor
8M byte
2M byte
2K byte
Main Proflie @ Main Level
Up to 15M b it/s
720 X 576, 720 X 480
NTSC, PAL4:3, 16:9
Mono, Dual mono, Stereo, Joint Stereo
32, 44.1 and 48KHz
9pin D-sub male, Max 115K bps
Fully DVB-Tcompliant
Connector
Frequency range
Channel bandwidth
Modulation
Constellation
Tx mode
Guard interval
Spectral inversion
Connector
Frequency range
output channel number
Processor
SDRAM
FLASH
EEPROM
MPEG 2
Data rate
Resolution
Video formatAspect Ratio
MPEG 1 layer 1 & 2
Type
Sampling rates
Connector
System capa bilities
Tuner
RF modulator
PAL G/I/K and NTSC
TV type
System resource
Video decoder
MPEG audio
Serial da ta interface
-
8/7/2019 5390 with supp - PDF
89/111
85
NEC-IR
up to 7 Meter
Max 30W
98V 240V
47Hz 63Hz
1 X RCA cinch
2 X RCA cinch
1 X RCA cinch
1 X optical port
S-Video jack
9pin D-sub c onnector
IEC 169 2 female
IEC 169 2 male
CVBS, Y/C, RGB, audio
CVBS, Y/C, RGB(in), audio
IEC 169-2 fema le
IEC 169-2 male
335 X 58.5 X 268(mm)
3.0Kg
Code
Operating condition
Power consumption
Supply voltage
Supply frequency
Video out
Audio out
Digital audio out
S-Video
Serial data
Digital tuner input
Loop throughout tuner
TV SCART
VCR SCART
RF input
RF output
Size (W X H X
Weight (Net)
Remote c ontrol
Power supply
Rear Panel
connector
Physical
Specification
-
8/7/2019 5390 with supp - PDF
90/111
DATA TRANSFER
is best carried out by an
authorized service person.
please contac t yourappointed dealer for more
information regarding
this feature.
-
8/7/2019 5390 with supp - PDF
91/111
SRT 5390
Connection & RecordingSupplement
-
8/7/2019 5390 with supp - PDF
92/111
For connection of the SRT 5390 there are number ofalternatives depending what is your preference andthe connection types on your TV.
Please connect by either of the following methodsA. B. C. (D . is mandatory for antenna connection)
Refer to Page 8 of the Instruction Manual for theConnector Reference Numbers listed below.
2
Connections
If your TV includes a 4 Pin Mini Din S-Video connector , you may choose to connect in this way.Although S-Video is available through the Scart, there isan additional S-Video connector (connector 2) on the
rear panel and unit can be connected to the TV this way.(You will need to purchase S-Video Lead separately)
If you choose to connect in this way, once unit isPOWERED (Refer Power On below), go into the SRT5390 Menu button 10 and select System Parameters and select S-Video in the AV Mode .
Important: Using this separate S-Video (Y/C) for yourVideo connection, you will need to make connectionsfor Audio.
For Audio this can be done by using the supplied RCA cable by connecting to Connector 9 for LeftAudio (RCA White) and Connector 10 for Right Audio(RCA Red), and then connect to appropriate RCAaudio connectors of your TV.
These Left (white) & Right (Red) RCA Audioconnections will provide MPEGA-2 Stereo.
If you require Dolby Digital Audio Output (throughyoure Dolby Digital Decoder Amplifier) please refer toNote: DOLBY DIGITAL AUDIO below)
Connector 2 S-VIDEO (Y/C) S-video jack S-video output
B. Separate S-Video (Y/C)Connector
A. SCART Connection for:RGB or S-Video or CVBS
If your TV includes a 21 Pin Scart Connector, youmay choose to connect in this way and select yourchoice of RGB, S-Video (Y/C) or CVBS (Composite).(You will need to Purchase Scart Lead separately)
Through the Scart, the Factory Default setting in theMenu is listed as RGB.
If you decide to operate as CVBS (Composite), youdo not need to change to CVBS mode in the A/Vmode (as explained below), as the unit willautomatically default to CVBS mode.
However, if you choose to have S-Video (Y/C) fromthe Scart , once unit is POWERED (Refer Power On below), please go into the Main Menu of the SRT5390 and select System Parameters , then Scrolldown to AV Mode and via the remote control left andright centre buttons select the preferred AV Mode.
(Connector 4 )
TV SCART
SCART 21 pin Scart output to TV:3 video signals to choose from:RGBS-Video (Y/C)CVBS (composite)
Also, by using Scart Output, Audio MPEG-2 is included
If you require Dolby Digital Audio Output (throughyour Dolby Digital Decoder Am0plifer, please refer toNote DOLBY DIGITAL AUDIO .
-
8/7/2019 5390 with supp - PDF
93/111
Connections
3
D. Connecting the Antenna
Connect TV Antenna to Connector 11 (TV ant) on the
SRT 5390
Connector 11 TVANT IN IEC 169-2 female Terrestrialstream input from antenna to SRT 5390
Having made the above connections to suit yourrequirements: The next step is to make certain youhave selected a Video Mode on your Television from your TV Remote Control
You can connect to your TV with the supplied RCA
cable to give you Video and Audio. This will give youCVBS (Composite Video & MPEG-2 Stereo for Audio)
Connector 8 VIDEO RCA cinch Composite videooutput Connector 9 AUDIO Left (White) RCA cinchLeft audio output Connector 10 AUDIO Right (Red)RCA cinch Right audio output
C. CVBS (Composite) viathe supplied RCA Lead
-
8/7/2019 5390 with supp - PDF
94/111
Turn the SRT 5390 ON. There is an ON/OFF Switch onthe rear panel of the Receiver. (Located beside the mainpower cord from the receiver)
Now Push the On/OFF Power button on the RemoteControl ( Red Button )
When Power is ON, you will view a Strong Image Banneron the TV Screen and your Receiver is now ready to be scanned to lock in all of the Broadcast Frequencies inyour area.
Power On
Automatic Scan Process
Press the Menu button (10) on the remote control anda Main Menu Banner will appear listing 3 topics.
Select INSTALLATION and push the ENTER Button 16 (button in the middle of the Remote control) and asecondary Banner will appear prompting you to entera 4 digit password. Enter the Default Password 0 0 0 0.
A Banner will appear with 5 topics. Select Automatic Scan by using the Middle scroll up/down buttons ofthe Remote Control.
With Automatic Scan selected, push ENTER Button.
Unit will now begin to scan and lock in all availablefrequencies in your area. This will take a few minutes.
Once Scan has been completed, a Banner will appearwhich will state:
NETWORK SCAN IS DONE and It willprompt you to push the ENTER button ( 10 ).
Once ENTER button has been pushed, you will needto push ENTER button again on the Remote Control,and Data will be saved, and normal TV broadcastchannel will now displayed.
Time Setting - Automatic
There is a manual procedure to set up the Time inyour unit.
However, as the Time is taken from the Time Print ineach broadcasters signal, once you have scanned thefrequencies into your unit, time will be automaticallygenerated, thus avoiding the necessity to manuallyinput the time. It is important to ensure Time is incorrect Mode. I.e. Daylight Saving YES / NO.
Time Setting - Manual
Push MENU Button
Select System Parameters and press ENTER
Scroll down to Local Time/Timer by using button 13
Using right Scroll button 15, Adjust by inputting dateand time via the numeric buttons on the remote control.
Scroll down to DL Saving and select correct mode:YES / NO .
Push EXIT to return to normal viewing.
4
-
8/7/2019 5390 with supp - PDF
95/111
Assure the correct A/V Mode has been selected in theMenu by Pushing Menu Button on the remote Control;Main Menu Banner will appear; Select System Parameters and then scroll down to A/V Mode and select the preferred AV mode : i.e. RGB or S-Video(Y/C) or CVBS (Composite)
Once preferred A/V mode has been selected, PushEXIT button 11 on the remote control to return tonormal viewing broadcast.
5
Dolby Digital Audio
If you have a Dolby Digital Decoder Amplifier, you canconnect to the amplifier by Optical Cable or Coaxial Cable (purchased separately). These connections willprovide for Dolby Digital Output when broadcast.
Connector 1 is the Optical audio output.Connector 3 is the Digital audio output.
To Enable Dolby digital to be heard when transmittedwithin the broadcast stream, you will need to selectDolby Digital in the System Parameters.
Push the Audio Button 5 .
Scroll down via button 13 and select Dig. Output
IMPORTANT: If broadcaster is not transmitting inDolby digital at that time, you will not be able toselect topic of DIG. Output
All of the above connection/s and procedurecompletes the Connections Installation, however,there are other connections that can be made(Not Essential), explained as below.
The Correct A/V Mode
-
8/7/2019 5390 with supp - PDF
96/111
6
Connectors
Connector 12 RF Loop Out
For Aerial Signal Pass through to your TV and/or VCR Channels 21 to 69
This is the signal coming from your antenna andpassing through the SRT 5390
This can be used for a variety of purposes as peritems A and B as follows.
A. With a separately purchased RF Lead, you canconnect from this connector to your TV antenna IN.
This enables you to switch back to normal analogue viewing. I.e. you would switch back to normal TVanalogue mode by pressing the TV Mode button onyour TV Remote Control.
B. You can choose to connect RF from this connectorto your VCR (separately purchased Lead) which willenable you to watch a normal Digital BroadcastChannel through the SRT 5300 / SRT 5390 and at thesame time you can record a different broadcastchannel into the VCR.
Therefore, as you are watching your digital channelthrough the SRT 5300 / SRT 5390, you would select achannel via your VCR Remote Control and pressRecord Button on your VCR.
E.g. you may be watching the Digital transmission ofCH7 through the SRT 5300 / SRT 5390 as normaland recording CH9 RF analogue through yourattached VCR.
Connector 7 RF Out to enabletuning of the UHF Signal
(Normally used when no Audio Video connections areavailable on your TV)
With a separately purchased RF Lead, you canconnect from this connector to your VCR or TV.
When connecting to a VCR, you then Tune the VCRto Default Channel 38.
This means that you are able to record into the VCR;the same channel you are viewing through the SRT5390. This would be RF analogue.
-
8/7/2019 5390 with supp - PDF
97/111
ConnectorsConnector 6 RF Loop In
This can be used for a variety of purposes as peritems A and B as follows.
A. For viewing on a second TV
(Using supplied RF Loop Lead)
With the SRT 5390 is a supplied RF Loop Lead.
When used, this is connected to Connector 6 (RF Loop In) and Connector 12 (RF Loop Out).
There may be circumstances where you want toconnect a Second TV (e.g. in another room) to theSRT 5390, and thus receive the same digitalprograms as viewed through the first priority TV.
Firstly, you would connect a seperatly purchased RFLead from Connector 7 (RF out) to your second TVand Tune this second TV to default Channel 38
In this situation, the Second TV would receive the same channels as broadcast through the first TV.
The second TV would be a Slave to the first TV and thesecond TV would not be able to change to other Channels(i.e. analogue channels), if preferred by the user.
However, by connecting the supplied RF Loop Lead from connector 6 to Connector 12 , the second TV
then has the additional capability of changingchannels if required by the user. I.e. they can changeto normal analogue channels.
B. Where Video Inputs are Required on Your TV
There may be circumstances where you do not haveenough Video Inputs on your TV to enable the SRT5300 / SRT 5390 to be connected. In thiscircumstance, action in the following way:
Connect a separately purchased RF Lead from
Connector 7 (RF out) to your second TV and Tune this second TV to default Channel 38.
Now connect the supplied RF Loop Lead fromconnector 6 to Connector 12.
VCR AUX Scart (CVBSComposite) for Video In & Out
On the rear panel there is a Second Scart called VCR AUX
(Requires separately purchased Scart Lead forconnection to VCR or DVD)
Essentially, there are 3 alternatives for using thisconnection and would mainly be used where there
are not enough Video Connections on your TV.Refer to the following alternatives A. B. C.
A. As a Switching device for other attached Video devices e.g. DVD Player/VCR
Because this connector is also Video IN , this enablesyou to switch to the Video IN source of your attached
VCR or DVD ; in those cases where you may want towatch your DVD Disk or VCR tape program
I.e. You can switch from watching your digital channelbroadcasts in STB mode to AUX mode for attachedvideo sources
To switch from normal viewing STB mode,Push AUXIN button on the remote control, and selectAUX position for attached VCR/DVD viewing.To return to normal digital STB mode, push AUXIN and select STB.
B. To enable to RECORD to your attached video devices: DVD Player / VCR
Because this VCRAUX Scart connector is also Video Out , you can Record the broadcast signal of the SRT5390 into your attached VCR/DVD.Push Record on your VCR / DVD Remote Control.
C. Connection for SRT 5390 where no Video Inputs available on your TV
If your TV does not have enough available connectionsof Video Inputs, you can receive the STB digital Channelsignal and pass this through to your TV by using thisAuxIn Scart connection from the SRT 5390 to your TV(This would be CVBS [Composite] Video Signal).
7
-
8/7/2019 5390 with supp - PDF
98/111
OverviewSelecting and ChangingChannels
There are 2 methods to select and change channels
A. Press the desired Number Button on the remotecontrol.
Please note:1 = CH102 = Ch 2 ABC3 = SBS7 = Ch 79 = Ch 9
B. Select and change channels by using theUp/Down channel buttons
Button 12 CH, for UpButton 13 CH, for Down
Checking your AerialSignal: Level & Quality
To assure that you can receive adequate picture quality for digital transmissions , it is important to check thatyou have enough Signal Level and Quality Level (signal to noise ratio) through your antenna system.
Level: ideal is 70%, minimum is 50%Quality: ideal is 100%, minimum is 80%
Press MENU button 10
Select INSTALLATION and press ENTER buttonInput 4 digit password - 0000
Select TUNER STATE and press ENTER button
Banner will show the Level and Quality Bar Graphsand Channel number.
To change to each channel number to check the %,press Channel Up / Down buttons 12/13 .
IMPORTANT: On the opened banner you will note achannel number.
Examples: Channel (MUX) number 6 on the banner. However,you will note the broadcast station is actually Channel
7 and also indicated on the front display.
Channel (MUX) number 8 on the banner. However,you will note the broadcast station is actually Channel9 and also indicated on the front display.
Volume Control
To adjust Volume up and down, press the followingbuttons on the remote control:
Volume Increase: VOL Button 15 Volume Decrease: VOL Button 14
Important: The Volume level is dependant on thevolume level that you firstly set within your TV I.e. viayour TV remote control volume setting.
Volume Mute
Press Button 2 to mute sound. Volume Bar in thebanner will be RED.Press Button 2 again to reactivate sound.
8
-
8/7/2019 5390 with supp - PDF
99/111
Setting Aspect RatioThere are 2 methods to Set and Switch between yourpreferred Aspect Ratio:I.e. 4:3 Letterbox / 4:3 Full Screen / 16:9 Full Screen.
A. Menu Setting
Press MENU button 10
Select System Parameters and press Enter button
Select Aspect Ratio preferred i.e. 4x3 or 16 x9 or Auto
If you select Auto , when viewing a broadcast program,aspect ratio will change according to the aspect ratiobeing transmitted by the broadcaster at that time.
After selecting your preference, push EXIT twice toreturn to normal viewing.
B. Hot Key for Aspect Ratio change
Whilst viewing a broadcast program, you can changethe aspect ratio to your preference by pushing RATIO Button 20.
As you make your selection by this button, you will seethe aspect ratio type indicated on the TV screen banner.I.e. 4x3 Full Screen / 4x3 Letterbox / 16x9 Full Screen.
9
Captions ON/OFF
IMPORTANT: Is dependant on when transmitted bybroadcast stream
To view Captions, Press CAPTIONS Button 19
Banner will state Captions ON
Push button to turn Captions OFF . Banner will stateCaptions OFF.
Teletext
To view teletext, select a Channel 7 broadcast stationPress BLUE Button 21
To select your preferred Teletext topics, enter thetopic number via the channel numbers on the remotecontrol.
To turn Teletext OFF and return to normal viewing,push EXIT button
-
8/7/2019 5390 with supp - PDF
100/111
Enables setting of AGE LIMIT as a protection forChildrens viewing.
There are 8 categories that can be selected.No Block / Block All / Block G & Above / Block PG &Above/ Block M & Above / Block MA & Above / Block AV & Above / Block R &Above
Press MENU button, select System Parameters andpress ENTER button
Select Parental Control and press ENTER buttonInput 4 digit password 0000
Select AGE LIMIT and select preferred age boundaryby pressing scroll button 15
Push EXIT button 3 times to return to normal viewing
Note : Age Limit restriction is operational only when thesignal being broadcast, carries age limit information.
10
Lock Channel Editing &Lock Installation
Factory default for these 2 modes is set to YES
This ensures your Password must be entered whenaccessing the Installation & Channel Editing modes;as a form of security.
If you prefer to have open access to these modes,without the requirement of inputting a password eachtime, you can set to NO in the Menu.
. Press MENU button
. Select System Parameters & push ENTER button
. Select Parental Control and push ENTER button
. Input 4 digit Password
. Using scroll down button 13, Scroll to Lock Channel Editing and using Scroll button 15 , change to NO .
. Repeat for Lock Installation
. Push EXIT button 3 times to return to normal viewing
New Password
Although the default 4 digit password is 0000, youcan set your own password if preferred.
Press MENU button and select System Parameters.Press ENTER button
Select Parental Control and Press Enter button Input 4 digit password 0000 Scroll down via button 15 and select New Password Choose your new 4 digit password number and
input by your selection of numberbuttons on the remote control.
Once you have input your new password, Verify Password will be automaticallyhighlighted, re-enter your password
Password Change banner will appear as verification Push EXIT button 3 times to return to normal viewing
Parental Control
-
8/7/2019 5390 with supp - PDF
101/111
There are 4 methods of Recording:
Manual Record Continuous Manual Record Time Length Input Delayed Recording Time Shift Recording
11
Recording Information
Manual Record Continuous
Push the RED Record Button ONCE andRecording will commence and continue until youdecide to stop the recording.
As the program is being recorded, you will see afile number indication on the displaye.g HD001, HD002, HD 003 etc.Also, a red flashing indicator will be viewed in the display.
To Stop the Recording, push the ORANGE List Button
HD Program Guide Banner will be viewed with thecurrent recording highlighted with program name andREC as an indication the program is still recording.
With this HD Program Banner in view, there are 2methods that can be selected toStop the recording:Push the ORANGE List button or the EXIT button.
Banner will now be viewed Do you want to Stop Recording?
Push ENTER button for YES or EXIT button for NO
When you select YES to stop recording,HD Program Guide Banner will now list theProgram name and file length.
Now push the ORANGE List button or the EXIT button to go to normal TV Broadcast mode.
Manual Record Time Length Input
Push the RED Record Button TWICE and REC Banner will be viewed with the following information
Name - The ChannelInformation - Program TitleStart - Start Time of RecordingStop - Stop Time
In this mode you can input your selected Stop Time by scrolling down to the Stop bar and via L & RScroll Keys input your Stop Time via the numeric keys.
Press ENTER to confirm your input and Recordingwill now commence.
As the program is being recorded, you will see a filenumber indication on the displaye.g. HD001, HD002, HD 003 etc.Also, a red flashing indicator will be viewed in the display.
Once the allotted Record Time is reached, HD Program Guide Banner will be viewed with thecurrent recording highlighted with program nameand file length.
Push the ORANGE List button or the EXIT buttonto go to normal TV Broadcast mode.
-
8/7/2019 5390 with supp - PDF
102/111
There are 14 Timer Entries available.
Push the GREY Timer Record button (Bottom Right)
Timer banner will be viewed listing the available 14 entries
With Time slot entry highlighted, push the ENTER button
Using the L & R scroll buttons, select TV or Radio mode in the CH Type bar .(TV mode is the default setting)
Using the Up & Down scroll buttons, select theCh Number bar and select your Channel numbervia the L & R scroll buttons: Ch Nam e will also beviewed on the CH. Name Bar
Scroll down to Start Time bar and input the StartTime via the numeric buttons
Scroll Down to Stop Time bar and input the StopTime via the numeric buttons.
Scroll down to Status bar and via the L & R scrollbuttons; select your preference of Once, Daily, or Weekly.
Scroll down to HD Record bar and select ON via theL & R scroll buttons.(Will be listed as ON