5321a
DESCRIPTION
niokinokTRANSCRIPT
![Page 1: 5321A](https://reader036.vdocuments.us/reader036/viewer/2022073012/563dbb2f550346aa9aaaf534/html5/thumbnails/1.jpg)
© Renault s.a.s 2008
"The repair methods given by the manufacturer in this document are based on the technicalspecifications current when it was prepared.
The methods may be modified as a result of changes introduced by the manufacturer in theproduction of the various component units and accessories from which his vehicles areconstructed."
All copyrights reserved by Renault.
The reproduction or translation in part of whole of the present document, as well as the useof the spare parts reference numbering system, are prohibited without the prior writtenconsent of Renault.
77 11 409 402 SEPTEMBER 2008 Edition Anglaise
Technical Note5321A
X85, and D4F
Maintenance values for CLIO III - D4F engine
![Page 2: 5321A](https://reader036.vdocuments.us/reader036/viewer/2022073012/563dbb2f550346aa9aaaf534/html5/thumbnails/2.jpg)
Maintenance values for CLIO III - D4Fengine
Contents
Page
Maintenance values for CLIO III - D4F engineContentsPage
01D MECHANICAL INTRODUCTION
Maintenance values: Description 01D-1
![Page 3: 5321A](https://reader036.vdocuments.us/reader036/viewer/2022073012/563dbb2f550346aa9aaaf534/html5/thumbnails/3.jpg)
01D-1
MECHANICAL INTRODUCTIONMaintenance values: Description 01D
I - ENGINE MAINTENANCE SUMMARYEssential special tooling
Mot. 1018 Sump plug tool.
Mot. 1330 Oil filter removing tool (66mm diameter).
Ele. 1382 Spark plug spanner toolkit 16& 21 mm torque 1.75 & 28Nm + square adapter 9-9.52for spanner Ele. 1086
Ele. 1382-01 14 mm Plug spanner.
Fre. 1190-01 Brake calliper piston returntool.
Note:
(*) The engine oil grade and viscosity only appliesto the following countries:
Germany, Andorra, Austria, Belgium, Denmark,Spain, Estonia, Finland, France, Great Britain,Greece, Hungary, Ireland, Iceland, Italy, Latvia,Liechtenstein, Lithuania, Luxembourg, Norway,Netherlands, Poland, Portugal, Czech Republic,Slovakia, Slovenia, Sweden, Switzerland, Croatia,Israel.
Important: for vehicles in countries which are notlisted above, please refer to Technical Note 6013A(see Engine oil: Specifications) .
D4F, and 740 or 742 or 764
OIL
Engine oil grade (*) RN0700
Oil viscosity (*) depending on externaltemperature
t > -20˚C 10W40
t > -25˚C 5W30 or 5W40
t > -30˚C 0W30 or 0W40
Engine oil capacity with oil filter replace-ment
4 litres
DRAIN PLUG Tool (Mot. 1018)
Tightening torque 20 N.m
OIL FILTER Tool (Mot. 1330)
Tightening torque 3/4 of a turn manually after contact
SPARK PLUGS Tool (Ele. 1382) and (Ele. 1382-01)
Tightening torque 28 N.m
Electrode gap 0.8 to 1 mm
COOLANT Coolant grade GLACEOL RX type D
Cooling system capacity 5 litres
![Page 4: 5321A](https://reader036.vdocuments.us/reader036/viewer/2022073012/563dbb2f550346aa9aaaf534/html5/thumbnails/4.jpg)
01D-2
MECHANICAL INTRODUCTIONMaintenance values: Description 01D
II - CHASSIS MAINTENANCE SUMMARY
D4F, and 784
OIL
Engine oil grade (*) RN0710
Oil viscosity (*) depending on externaltemperature
t > -20˚C 5W40
t > -25˚C 5W40
t > -30˚C 0W40
Engine oil capacity with oil filter replace-ment
4 litres
DRAIN PLUG Tool (Mot. 1018)
Tightening torque 20 N.m
OIL FILTER Tool (Mot. 1330)
Tightening torque 3/4 of a turn manually after contact
SPARK PLUGS Tool (Ele. 1382) and (Ele. 1382-01)
Tightening torque 24 N.m
Electrode gap 0.6 to 0.7 mm
COOLANT Coolant grade GLACEOL RX type D
Cooling system capacity 5.5 litres
WHEELS Tightening torque 105 N.m
ESP
BRAKE FLUID Brake fluid grade DOT 4, ISO CLASS 6,RENAULT Standard:03-50-006
WITHOUT ESP
BRAKE FLUID Brake fluid grade DOT 4, ISO CLASS 6,RENAULT Standard:03-50-006
DOT 4, ISO CLASS 4,RENAULT Standard:03-50-005
![Page 5: 5321A](https://reader036.vdocuments.us/reader036/viewer/2022073012/563dbb2f550346aa9aaaf534/html5/thumbnails/5.jpg)
01D-3
MECHANICAL INTRODUCTIONMaintenance values: Description 01D
FRONT BRAKES
For vehicles equipped with rear drum brakes
REAR BRAKES
For vehicles equipped with rear disc brakes
REAR BRAKES
Tools Tool (Fre. 1190-01)
Tightening torques Front disc bolts 15 N.m
Front guide pin bolts 32 N.m
Front calliper support bolts 105 N.m
Measurement Front disc diameter 260 mm
Minimum front brake disc thickness 19.8 mm
Minimum front brake pad thickness 8 mm
Tightening torque Rear drum nut 175 N.m
Measurement Rear drum diameter 203.2 mm
Maximum rear drum diameter 204.4 mm
Minimum rear lining thickness 2.4 mm
Tools Tool (Fre. 1190-01)
Tightening torques Rear disc nut 175 N.m
Rear guide pin bolts 32 N.m
Rear calliper support bolts 105 N.m
Measurement Rear disc diameter 240 mm
Minimum rear brake disc thickness 7mm
Minimum rear brake pad thickness 7.5 mm