52002 magnetic dish 52000 - hommel hercules
TRANSCRIPT
ß Hand tools
eng/OP www.hhw.de 52.1
5
Magnetic dish
TypeRound, made of stainless steel. Thanks to themagnetic effect on both sides, the magnetic dishcan be attached to all iron materials such as toolcarts, tool panels, or lifting platforms. The bottom ofthe dish is rubber-coated, in order to protect thesurfaces.
ApplicationMulti-purpose magnetic dish with strong magnet,which secures small parts such as screws or wheelbolts.
52002
Permanent magnetising and demagnetising instruments
+TypeHousing made of rigid plastics, cadmium-free.
ApplicationFor magnetising and/or demagnetising of screwdri-ver blades, tweezers and similar tools made of steel.
52000
52000 …
101
52000
Ø 52002 …mm150 101
52002
Set of magnetic rubber rings
TypeThe magnetic system consists of a flexible rubberring. The magnets are built in in the face. Set of 4pcs.ApplicationThe rubber ring slides along the tool. Therefore, the
rubber ring can be adjusted to the screw, or if nomagnet is neccessary, the ring can be removed orpushed onto the shank. For slotted screws, Phillips,hexagonal head, TORX® and Trisquare wrenches.
52003
Ring sizessuitable for: Size 1 Size 2 Size 3 Size 4
Allen key 3 + 4 5 6 + 7 8 + 9T profile 15, 20, 25 27 + 30 40 + 45 50
Trisquare – 5 + 6 8 10
Set 52003 …
4-part 101
52003
Set of extra small screwdrivers
TypeDIN 8320 BS1. Handles made of impact-proofplastic, handle end rotatable.QualityBlade made of chrome-vanadium steel, harde-ned and burnished.
52004 101In plastic case.
52004 102In wooden case.
52004 101
Set contents Cutting edge width x Overall length 52004 …mm
5-part 1,0 x 104 / 1,4 x 104 / 1,8 x 104 / 2,3 x 104 / 3,0 x 104 1017-part 0,6 x 104 / 0,8 x 104 / 1,0 x 104 / 1,2 x 104 / 1,4 x 104 / 1,8 x 104 / 2,3 x 104 102
52004
Extra small screwdriver
TypeSimilar to DIN 8320. Blade hardened, with fluted,nickel-plated steel handle, revolving handle end. Setin wooden box.
QualityBlade made of chrome-vanadium steel. 52005
Set contents cutting edge width x Overall length 52005 …mm
6-part 1,0 x 83 / 1,5 x 87 / 1,8 x 101 / 2,3 x 104 / 3,0 x 117 / 3,5 x 117 101
52005 - 52009
Cutting edge width x thickness Handle Ø Overall length 52009 …mm mm mm
1,0 x 0,20 4 83 1011,5 x 0,23 4 87 1021,8 x 0,30 6 101 103
Cutting edge width x thickness Handle Ø Overall length 52009 …mm mm mm
2,3 x 0,30 6 104 1043,0 x 0,50 8 117 1053,5 x 0,60 8 117 106
eng/OP
• Multi-purpose screwdrivers • Workshop screwdrivers
www.hhw.de52.2
5
Multi-purpose screwdrivers
Type4 blades, hardened, exchangeable, in handle, shankmade of brass, nickel-plated, handle fluted.QualityBlade made of chrome-vanadium steel.
52015
Cutting edge width x thickness Handle Ø Overall length 52015 …mm mm mm1,5 x 0,23 / 2,0 x 0,4 / 2,5 x 0,4 / 3,0 x 0,5 8,5 115 101
52015
Workshop screwdrivers
ßTypeOutput: DIN 5264 A, ISO 2380. Round blade,hardened, with nicromatt surface, non-dazzle andnon-peeling, Black Point tip and Kraftform handlewith roll stop.
QualityBlade made of high-alloyed special vanadiumsteel.
Note:Blade width 3,0 and 4,0mm with identical blade andshank diameter.
52050
Set contents Cutting edge width x blade length 52050 …mm
6-part 3,0 x 80 / 4,0 x 100 / 5,0 x 100 / 6,0 x 125 / 7,0 x 150 / 10,0 x 200 101
Cutting edge width x thickness Blade length Overall length 52060 …mm mm mm
5,0 x 0,8 100 198 1016,0 x 1,0 125 223 1027,0 x 1,2 150 248 103
Cutting edge width x thickness Blade length Overall length 52060 …mm mm mm
8,0 x 1,2 175 287 10410,0 x 1,6 200 312 105
52050 - 52060
Stubby screwdrivers (carburettor screwdrivers)
ßTypeSquare blade for using a wrench, with nicromattsurface, dazzle-free and non-peeling, red Kraftformhandle.
QualityBlade made of high-alloyed special vanadiumsteel.
Cutting edge width x thickness Blade length Overall length 52372 …mm mm mm
5,5 x 1,0 25 79 101L 5,5 x 1,0 45 99 102
Cutting edge width x thickness Blade length Overall length 52372 …mm mm mm
6,5 x 1,2 25 79 103L 6,5 x 1,2 45 99 104
52372
52372
Workshop screwdrivers
0Type Round blade, full-hardened, glossy nickel-plated.Multi-component handle with extra large softzone and attachment eye.
Quality Blade made of chrome-vanadium steel.
Note: Blade width 3,0 and 4,0mm with identical blade andshank diameter.
52065
Set contents Cutting edge width x blade length 52065 …mm
6-part 3,0 x 80 / 4,0 x 100 / 5,5 x 125 / 6,5 x 150 / 8,0 x 175 / 10,0 x 200 101
Cutting edge width x thickness Blade length Overall length 52066 …mm mm mm
4,5 x 0,8 100 207 1015,5 x 1,0 125 232 1026,5 x 1,2 150 269 103
Cutting edge width x thickness Blade length Overall length 52066 …mm mm mm
8,0 x 1,2 175 294 10410,0 x 1,6 200 319 105
52065 - 52066
ß Hand tools
eng/OP www.hhw.de 52.3
5
Workshop screwdrivers
+TypeRound blade, glossy nickel-plated, full-hardened,with impact-proof, transparent square end handlemade of cellulose acetate, red.
QualityBlade made of chrome-vanadium-molybdenumsteel.
Note:Starting at 5,5mm blade width, corrugated tipagainst slipping.
52108
Set contents Cutting edge width x Blade length 52108 …mm
6-part 2,5 x 75 / 3,5 x 90 / 4,5 x 100 / 5,5 x 120 / 7,0 x 140 / 9,0 x 160 101
Cutting edge width x thickness Blade length Overall length 52110 …mm mm mm
2,5 x 0,4 75 150 1013,5 x 0,5 90 175 1024,5 x 0,7 100 195 103
5,5 x 0,95 120 225 104
Cutting edge width x thickness Blade length Overall length 52110 …mm mm mm
7,0 x 1,05 140 255 1059,0 x 1,2 160 275 106
10,0 x 1,4 180 305 107
52110
52108 - 52110
Workshop screwdrivers
+TypeOutput: DIN 5265, ISO 2380. Round blade, full-hardened, with matt-chrome finish. ChromTop tip.SoftFinish® handle with roll stop.
QualityBlade made of high-quality chrome-vanadium-molybdenum steel.
52120 208-221
Cutting edge width x thickness Blade length Overall length 52120 …mm mm mm
4,0 x 0,8 100 211 2085,5 x 1,0 125 236 2136,5 x 1,2 150 268 218
L 8,0 x 1,2 175 299 221
Cutting edge width x thickness Blade length Overall length 52120 …mm mm mm
4,0 x 0,8 25 81 2305,5 x 1,0 25 81 2316,5 x 1,2 25 81 2328,0 x 1,2 25 81 233
52120 230-233
52120
52125 201-206
52125 208-209
Workshop screwdrivers
sTypeOutput: DIN 5264 A, ISO 2380. Round blade,nicromatt, with Lasertip and Kraftform handle withroll stop.
QualityBlade made of 73 Mo V 5 2. 52123
Cutting edge width x thickness Blade length Overall length 52123 …mm mm mm
5,0 x 0,8 100 198 1016,0 x 1,0 125 230 1026,5 x 1,2 150 255 103
Cutting edge width x thickness Blade length Overall length 52123 …mm mm mm
7,0 x 1,2 150 255 1048,0 x 1,2 175 287 105
10,0 x 1,6 200 312 106
52123
Workshop screwdrivers
,TypeOutput: DIN 5264 A, ISO 2380-1 A.Round blade, full-hardened, matt-chrome finish,burnished tip. Ergonomic 3-component handle,impact-proof. Permanent colour coding on bothhandle ends (for slotted screws = yellow).
QualityBlade made of vanadium-extra steel.
52125 207
Cutting edge width x thickness Blade length Overall length 52125 …mm mm mm
2,5 x 0,4 75 197 2013,0 x 0,5 75 197 202
L 3,0 x 0,5 125 247 2033,5 x 0,6 75 197 204
L 3,5 x 0,6 125 247 205
Cutting edge width x thickness Blade length Overall length 52125 …mm mm mm
4,0 x 0,8 100 222 2065,5 x 1,0 150 272 2076,5 x 1,2 150 272 2088,0 x 1,6 175 297 209
52125
eng/OP
• Workshop screwdrivers
www.hhw.de52.4
5
Stubby screwdrivers (carburettor screwdrivers)
,TypeOutput: DIN 5264 A, ISO 2380-1 A.Round blade, full-hardened, matt-chrome finish,burnished tip. Ergonomic 3-component handle,impact-proof. Permanent colour coding on bothhandle ends (for slotted screws = yellow).
QualityBlade made of vanadium-extra steel.
52376
52376
Workshop screwdrivers
+TypeRound blade, glossy nickel-plated, full-hardened,with handle made of hardwood, beechwood,lacquered. Impact head with leather cap, thereforeno damage to end of handle.
QualityBlade made of chrome-vanadium steel.
Note:Starting at 5,5 mm blade width full-length blade,hexagonal shoulder on tang for using a wrench andcorrugated tip against slipping.
52138
Set contents Cutting edge width x Blade length 52138 …mm
5-part 3,5 x 75 / 4,5 x 90 / 5,5 x 100 / 7,0 x 125 / 9,0 x 150 101
52138 - 52140
Cutting edge width x thickness Blade length Overall length 52140 …mm mm mm
3,5 x 0,6 75 175 1014,5 x 0,8 90 190 102
5,5 x 0,95 100 205 1037,0 x 0,95 125 230 104
Cutting edge width x thickness Blade length Overall length 52140 …mm mm mm
9,0 x 1,1 150 270 10510,0 x 1,2 175 295 10612,0 x 1,4 200 325 107
14,0 x 1,75 250 380 108
Cutting edge width x thickness Blade length Overall length 52376 …mm mm mm
3,5 x 0,6 25 83 2014,0 x 0,8 25 83 2025,5 x 1,0 25 83 203
Cutting edge width x thickness Blade length Overall length 52376 …mm mm mm
6,5 x 1,2 25 83 2058,0 x 1,2 25 83 207
Workshop screwdrivers
ßTypeOutput: DIN 5264 A, ISO 2380.Full-length hexagonal blade with impact plate,hexagonal shoulder on tang for using a wrench (4,5mm without). Blade hardened throughout, withnicromatt surface, non-dazzle and non-peeling,Black Point tip and Kraftform handle with roll stop.
QualityBlade made of high-alloyed special vanadiumsteel.
Note:Starting at 5,5 mm blade width: with temperedhexagonal shoulder on tang for using a wrench.
52148
Set contents Cutting edge width x Blade length 52148 …mm
5-part 3,5 x 75 / 4,5 x 90 / 5,5 x 100 / 7,0 x 125 / 9,0 x 150 101
52148 - 52150
Cutting edge width x thickness Blade length Overall length 52150 …mm mm mm
3,5 x 0,6 75 156 1014,5 x 0,8 90 171 1025,5 x 1,0 100 198 1037,0 x 1,2 125 223 104
Cutting edge width x thickness Blade length Overall length 52150 …mm mm mm
9,0 x 1,6 150 262 10510,0 x 1,6 175 287 10612,0 x 2,0 200 312 10714,0 x 2,5 250 367 108
Workshop screwdrivers
0Type Output: DIN 5625, ISO 2380. Hexagonal blade with hexagonal shoulder on tangfor using a wrench, full-hardened, matt-chrome
finish, blackened tip. Multi-component handle with extra large softzone and attachment eye. Quality Blade made of chrome-vanadium-molybdenumsteel.
52152
Cutting edge width x Blade length Overall length 52152 …mm mm
3,5 x 75 165 1014,5 x 90 190 102
5,5 x 100 212 1036,5 x 125 237 104
Cutting edge width x Blade length Overall length 52152 …mm mm
8,0 x 150 262 10510,0 x 175 287 10612,0 x 200 312 107
52152
ß Hand tools
eng/OP www.hhw.de 52.5
5
Workshop screwdrivers
+Type Output: DIN 5265, ISO 2380. Hexagonal blade with hexagonal shoulder on tangfor using a wrench, full-hardened, matt-chromefinish. ChromTop tip. SoftFinish® handle with rollstop.
Quality Blade made of high-quality chrome-vanadium-molybdenum steel.
52151
Cutting edge width x thickness Blade length Overall length 52151 …mm mm mm
3,5 x 0,6 75 186 1014,5 x 0,8 90 201 1025,5 x 1,0 100 213 1036,5 x 1,2 125 238 1047,0 x 1,1 125 238 105
Cutting edge width x thickness Blade length Overall length 52151 …mm mm mm
8,0 x 1,2 150 268 1069,0 x 1,4 150 268 107
10,0 x 1,6 175 293 10812,0 x 2,0 200 318 10914,0 x 2,5 250 368 110
52151
Workshop screwdrivers
+Type Output: DIN 5265, ISO 2380. Hexagonal blade with hexagonal shoulder on tangfor using a wrench, full-hardened, matt-chromefinish. ChromTop tip. SoftFinish® handle with rollstop and steel plate.
Quality Blade made of high-quality chrome-vanadium-molybdenum steel.
52153
Cutting edge width x thickness Blade length Overall length 52153 …mm mm mm
3,5 x 0,6 75 186 2014,5 x 0,8 90 201 2025,5 x 1,0 100 213 2036,5 x 1,2 125 238 204
Cutting edge width x thickness Blade length Overall length 52153 …mm mm mm
8,0 x 1,2 150 271 20510,0 x 1,6 175 296 20612,0 x 2,0 200 321 20714,0 x 2,5 250 371 208
52153
Workshop screwdriver/The chisel-screwdriver
sTypeOutput: DIN 5264 A, ISO 2380.Full-length hexagonal blade with impact plate andhexagonal shoulder on tang for using a wrench(starting at 4,5 x 0,8 mm). Black Point tip, exceptio-nally tough tempered. Soft zone Kraftform® handlewith roll stop.
QualityBlade made of 73 Mo V 5 2.
Note:Blade length 200 and 250 mm handle made of one-component material w/o. soft zones.
52154
Cutting edge width x thickness Blade length Overall length 52154 …mm mm mm
3,5 x 0,6 80 161 1014,5 x 0,8 90 188 1025,5 x 1,0 100 205 1037,0 x 1,2 125 230 104
Cutting edge width x thickness Blade length Overall length 52154 …mm mm mm
9,0 x 1,6 150 262 10510,0 x 1,6 175 287 10612,0 x 2,0 200 317 10714,0 x 2,5 250 319 108
52154
Workshop screwdrivers
sType Output: DIN 5264 A, ISO 2380.With Lasertip. Hexagonal blade, nicromatt,hexagonal shoulder on tang for using a wrench(starting at 4,5 x 0,8 mm) and soft zone Kraftform®
handle with roll stop.
QualityBlade made of 73 Mo V 5 2. 52156
Cutting edge width x thickness Blade length Overall length 52156 …mm mm mm
3,5 x 0,6 75 156 1014,0 x 0,8 90 171 1024,5 x 0,8 90 188 1035,5 x 1,0 100 198 104
Cutting edge width x thickness Blade length Overall length 52156 …mm mm mm
6,5 x 1,2 125 230 1057,0 x 1,2 125 230 1069,0 x 1,6 150 262 107
10,0 x 1,6 175 287 108
52156
eng/OP
• Workshop screwdrivers • Electrician’s screwdrivers • ESD/EGB screwdrivers
www.hhw.de52.6
5
Workshop screwdrivers
,TypeOutput: DIN 5264-A ISO 2380-1-A.Hexagonal blade, full-hardened, matt-chromefinish, burnished tip. Hexagonal shoulder on tang forusing a wrench. Ergonomic 3-component handle,
impact-proof. Permanent colour coding on bothhandle ends (for slotted screws = yellow).QualityBlade made of vanadium-extra steel.
52157 201-203
52157 204-205
Cutting edge width x thickness Blade length Overall length 52157 …mm mm mm
5,5 x 1,0 125 247 2016,5 x 1,2 150 272 2028,0 x 1,6 175 297 203
Cutting edge width x thickness Blade length Overall length 52157 …mm mm mm
10,0 x 1,6 175 336 20412,0 x 2,0 200 361 205
52157
Electrician’s screwdrivers
ßTypeOutput: DIN 5264 A, ISO 2380.Round blade, hardened, with nicromatt surface,non-dazzle and non-peeling, Black Point tip and
Kraftform handle with roll stop. With constant bladewidth and blade diameter.QualityBlade made of high-alloyed special vanadiumsteel.
52158
Cutting edge width x thickness Blade length Overall length 52160 …mm mm mm
2,5 x 0,4 50 120 1013,0 x 0,5 80 150 1033,5 x 0,6 125 205 105
Cutting edge width x thickness Blade length Overall length 52160 …mm mm mm
4,0 x 0,8 100 180 1075,5 x 1,0 125 205 111
L 5,5 x 1,0 200 280 113
52158 - 52160
Set contents Cutting edge width x Blade length 52158 …mm
5-part 2,5 x 50 / 3,0 x 80 / 4,0 x 100 / 5,5 x 125 / 5,5 x 200 101
Electrician’s screwdrivers
sTypeOutput: DIN 5264 A, ISO 2380.Round blade, nicromatt, with Lasertip (size 3,5 -5,5 mm) and soft zone Kraftform® handle with rollstop. With constant blade width and blade diameter.
QualityBlade made of 73 Mo V 5 2.
52168Note:Blade length 300mm with handle made of one-com-ponent material without soft zones and withoutLasertip®.
52168
52165 - 52168
Electrician’s screwdrivers
0Type Round blade, full-hardened, glossy nickel-plated.Multi-component handle with extra large soft
zone and attachment eye. With constant blade widthand blade diameter. Quality Blade made of chrome-vanadium steel.
52162
Cutting edge width x thickness Blade length Overall length 52162 …mm mm mm
2,5 x 0,4 75 161 1013,0 x 0,5 80 166 1023,5 x 0,6 100 197 1034,0 x 0,8 100 207 104
L 4,0 x 0,8 150 257 105
Cutting edge width x thickness Blade length Overall length 52162 …mm mm mm
XL 4,0 x 0,8 200 307 1065,0 x 0,9 100 207 1075,5 x 1,0 200 232 1086,0 x 1,1 150 269 109
52162
Cutting edge width x thickness Blade length Overall length 52168 …mm mm mm
2,0 x 0,4 60 141 1002,5 x 0,4 60 141 101
L 2,5 x 0,4 75 156 1023,0 x 0,5 80 161 1033,5 x 0,6 100 181 104
L 3,5 x 0,6 125 206 105XL 3,5 x 0,6 200 281 106
Cutting edge width x thickness Blade length Overall length 52168 …mm mm mm
4,0 x 0,8 100 198 107L 4,0 x 0,8 150 248 108
XXL 4,0 x 0,8 300 398 1105,5 x 1,0 125 223 111
L 5,5 x 1,0 150 248 112XXL 5,5 x 1,0 300 398 114
Set contents Cutting edge width x Blade length 52165 …mm
5-part 2,5 x 75 / 3,0 x 80 / 4,0 x 100 / 5,5 x 125 / 5,5 x 200 101
ß Hand tools
eng/OP www.hhw.de 52.7
5
ESD/EGB screwdrivers
sTypeOutput: DIN 5264, ISO 2380.Round blade, Black-Point tip, ergonomicallyoptimised Kraftform® handle with roll stop.
ApplicationFor application with electronic construction partswith risk of electrostatics. Fulfils standard EN 100-015 part 1.QualityBlade made of high-alloyed special steel.
52169
Cutting edge width x thickness Blade length Overall length 52169 …mm mm mm
5,5 x 1,0 200 298 2046,0 x 1,0 125 223 2056,5 x 1,2 150 248 206
Cutting edge width x thickness Blade length Overall length 52169 …mm mm mm
7,0 x 1,2 150 262 2078,0 x 1,2 175 287 208
52169
VDE electrician’s screwdrivers
ßTypeOutput: DIN 5264 A, ISO 2380. Routine-tested incompliance with VDE 0680/T201, IEC 900, normDIN 7437, Black-Point tip and Kraftform handle,conical blade.
QualityBlade burnished, insulated. 52170
Set contents Cutting edge width x Blade length 52170 …mm
5-part 2,5 x 80 / 4,0 x 100 / 5,5 x 125 / 6,5 x 150 / 8,0 x 175 101
Cutting edge width x thickness Blade length Overall length 52175 …mm mm mm
2,5 x 0,4 80 150 1023,0 x 0,5 100 175 1033,5 x 0,6 100 180 1044,0 x 0,8 100 190 105
Cutting edge width x thickness Blade length Overall length 52175 …mm mm mm
5,5 x 1,0 125 225 1066,5 x 1,2 150 250 1078,0 x 1,2 175 285 108
52170 - 52175
VDE electrician’s screwdrivers
0Type Output: DIN 5264, ISO 2380. Routine-tested incompliance with DIN EN 60900 (IEC 900),
standard DIN 7437.QualityBlade burnished, insulated.
52180
Set contents Cutting edge width x Blade length 52180 …mm
5-part 2,5 x 75 / 4,0 x 100 / 5,5 x 125 / 6,5 x 150 / 8,0 x 175 101
Cutting edge width x thickness Blade length Overall length 52181 …mm mm mm
2,5 x 0,4 75 161 1023,0 x 0,5 100 186 1033,5 x 0,6 100 197 1044,0 x 0,8 100 207 105
Cutting edge width x thickness Blade length Overall length 52181 …mm mm mm
5,5 x 1,0 125 244 1066,5 x 1,2 150 269 1078,0 x 1,2 175 294 108
10,0 x 1,6 200 319 110
52180 - 52181
Cutting edge width x thickness Blade length Overall length 52320 …mm mm mm
3,5 x 0,6 100 204 1014,0 x 0,8 100 211 1025,5 x 1,0 125 243 1036,5 x 1,2 150 268 104
VDE electrician’s screwdrivers52320
+TypeOutput: DIN 5264, ISO 2380.Routine-tested, IEC 60900:2004.SoftFinish® handle with roll stop. The protectiveinsulation is completely integrated in the front part ofthe blade. 38 mm constant thin diameter: thisensures that screws or springs can be reached evenin hard-to-reach places.
QualityBlade made of chrome-vanadium-molybdenumsteel, full-hardened, burnished. 52320
eng/OP
• Electrician’s screwdrivers • Phillips screwdrivers PH
www.hhw.de52.8
5
VDE electrician’s screwdrivers
+TypeOutput: DIN 5264, ISO 2380.Routine-tested, DIN EN 60900 (IEC 900). SoftFi-nish® handle with roll stop.
QualityBlade made of chrome-vanadium-molybdenumsteel, full-hardened, burnished.
52323
Set contents Cutting edge width x Blade length 52323 …mm
5-part 2,5 x 75 / 4,0 x 100 / 5,5 x 125 / 6,5 x 150 / 8,0 x 175 101
Cutting edge width x thickness Blade length Overall length 52324 …mm mm mm
2,5 x 0,4 75 179 1023,5 x 0,6 100 204 1044,0 x 0,8 100 211 1054,5 x 1,0 125 236 106
Cutting edge width x thickness Blade length Overall length 52324 …mm mm mm
5,5 x 1,0 125 243 108L 5,5 x 1,0 175 293 109
6,5 x 1,2 150 268 1118,0 x 1,2 175 299 112
52323 - 52324
VDE electrician’s screwdrivers
+TypeOutput: DIN 5264, ISO 2380.Routine-tested, DIN EN 60900 (IEC 900), DIN
7437. Impact-proof, chemicals and oil-resistantsquare handle.QualityBlade made of chrome-vanadium steel, full-har-dened, burnished.
52325
Cutting edge width x thickness Blade length Overall length 52325 …mm mm mm
2,3 x 0,5 60 135 1012,5 x 0,4 75 150 1022,8 x 0,6 75 150 1033,0 x 0,5 100 175 104
L 3,0 x 0,5 150 225 1053,5 x 0,6 100 185 1063,5 x 0,8 100 185 1074,0 x 0,8 100 195 108
L 4,0 x 0,8 150 245 109
Cutting edge width x thickness Blade length Overall length 52325 …mm mm mm
4,5 x 1,0 125 220 1105,0 x 1,0 100 195 111
L 5,0 x 1,0 150 245 1125,5 x 1,0 125 230 1136,0 x 1,2 100 205 1146,5 x 1,2 150 255 1158,0 x 1,2 175 290 116
10,0 x 1,6 200 325 117
52325
VDE electrician’s screwdrivers
sTypeOutput: DIN 5264 A, ISO 2380. Blade burnished,insulated. Conical cutting edge, with Lasertip (3,5 -10 mm blade width). Routine-tested, standard:IEC 60900: 2004. Soft zone Kraftform handlewith roll stop.
QualityBlade made of 73 Mo V 5 2.
52326
Cutting edge width x thickness Blade length Overall length 52326 …mm mm mm
2,5 x 0,4 80 161 1013,0 x 0,5 100 181 1023,5 x 0,6 100 181 1034,0 x 0,8 100 198 104
Cutting edge width x thickness Blade length Overall length 52326 …mm mm mm
5,5 x 1,0 125 223 1056,5 x 1,2 150 255 1068,0 x 1,2 175 287 107
10,0 x 1,6 200 312 109
52326
VDE electrician’s screwdrivers
,TypeOutput: DIN 5264 A, ISO 2380-1. Routine-tested,DIN EN 60900 (IEC 900), standard DIN 7437. Bladewith matt-chrome finish, full-hardened, tip burnished.Ergonomic 3-component handle, impact-proof.Permanent colour coding on both handle ends (forslotted screws = yellow).
QualityBlade made of vanadium-extra steel.
52328 205-207
Cutting edge width x thickness Blade length Overall length 52328 …mm mm mm
2,5 x 0,4 75 177 2013,0 x 0,5 100 202 2023,5 x 0,6 100 222 2034,0 x 0,8 100 222 204
Cutting edge width x thickness Blade length Overall length 52328 …mm mm mm
5,5 x 1,0 125 247 2056,5 x 1,2 150 272 2068,0 x 1,2 175 297 207
52328
52328 201-204
ß Hand tools
eng/OP www.hhw.de 52.9
5
Screwdrivers (grub screwdrivers)
,TypeBlade coated to tip, hardened. Tapered, slim handlemade of plastics.
ApplicationFor set screws (grub screws) M 2,3 - M 5.QualityBlade made of vanadium-extra steel.
52371
Cutting edge width x thickness Blade length Overall length 52371 …mm mm mm
2,0 x 0,4 63 143 2012,5 x 0,4 75 155 202
Cutting edge width x thickness Blade length Overall length 52371 …mm mm mm
3,0 x 0,5 80 165 203
52371
Phillips screwdrivers PH
ßTypeOutput: DIN 5260 PH, ISO 8764 PH. Round blade,hardened, with nicromatt surface, non-dazzle andnon-peeling, Black Point tip and Kraftform handlewith roll stop.
ApplicationFor Phillips recess head screws. QualityBlade made of high-alloyed vanadium steel.
52386
Set contents Size x Blade length 52386 …mm
3-part 1 x 80 / 2 x 100 / 3 x 150 101
52390 208
52386 - 52390
Size Blade length Overall length 52390 …mm mm
0 60 141 2011 80 161 2022 100 198 204
Size Blade length Overall length 52390 …mm mm
3 150 262 20601 25 79 20802 25 79 209
Phillips screwdrivers PH
0Type Round blade, full-hardened, glossy nickel-plated.Multi-component handle with extra large softzone and attachment eye.
Quality Blade made of chrome-vanadium steel. 52391
Set contents Size x Blade length 52391 …mm
3-part 1 x 80 / 2 x 100 / 3 x 150 101
Size Blade length Overall length 52392 …mm mm
0 60 146 1011 80 187 1022 100 219 103
Size Blade length Overall length 52392 …mm mm
3 150 269 1044 200 319 105
52391 - 52392
Phillips screwdrivers PH
+TypeOutput: DIN 5260 PH, ISO 8764 PH. Round blade,glossy nickel-plated, full-hardened, with impact-pro-of, red square end handle made of cellulose acetate.
ApplicationFor Phillips recess head screws.QualityBlade made of chrome-vanadium-molybdenumsteel.
52395
Set contents Size x Blade length 52395 …mm
3-part 1 x 80 / 2 x 100 / 3 x 150 101
Size Blade length Overall length 52396 …mm mm
0 60 135 1011 80 175 102
Size Blade length Overall length 52396 …mm mm
2 100 205 1033 150 265 104
52396
52395 - 52396
eng/OP
• Phillips screwdrivers PH
www.hhw.de52.10
5
Phillips screwdrivers PH
sAusführungOutput: DIN 5260 PH, ISO 8764 PH.Round blade, nicromatt, with Lasertip (size 1 - 3)and soft zone Kraftform® handle with roll stop.ApplicationFor Phillips recess head screws.
QualityBlade made of 73 Mo V 5 2.
Note:Blade length 25 and 300 mm handle made of one-component material w/o. soft zones.
52405 110-111
52405
52400 - 52405
Phillips screwdrivers PH
+TypeOutput: DIN 5260 PH, ISO 8764 PH. Round blade,full-hardened, matt-chrome finish. ChromTop tip.SoftFinish® handle with roll stop.
ApplicationFor Phillips recess head screws.QualityBlade made of high-quality chrome-vanadium-molybdenum steel.
52398
Size Blade length Overall length 52398 …mm mm
0 60 164 2011 80 191 202
Size Blade length Overall length 52398 …mm mm
2 100 218 2053 150 274 208
52398
Phillips screwdrivers PH
,TypeOutput: DIN/ISO 8764-1. Round blade, full-hardened, matt-chrome finish,burnished tip. Ergonomic 3-component handle,impact-proof. Permanent colour coding on bothhandle ends (for PH = red).
Application For Phillips recess head screws.QualityBlade made of vanadium-extra steel.
52419 302-303
Size Blade length Overall length 52419 … 52420 …mm mm
0 60 182 3011 75 197 302
L 1 200 322 3032 100 222 304
L 2 200 322 3053 150 272 306
01 25 83 20102 25 83 202
52419 304-306
52420
52419 - 52420
Size Blade length Overall length 52405 …mm mm
0 60 141 1011 80 178 102
L 1 200 298 103XL1 300 398 104
2 100 205 105L 2 200 305 106
Size Blade length Overall length 52405 …mm mm
XL 2 300 398 1073 150 262 1084 200 312 109
01 25 79 11002 25 79 111
Set contents Size x Blade length 52400 …mm
3-part 1 x 80 / 2 x 100 / 3 x 150 101
52419 301
Phillips screwdrivers PH
+TypeOutput: DIN 5260 PH, ISO 8764 PH.Round blade, fully glossy nickel-plated, full-harde-ned, with hexagonal shoulder on tang for using awrench and handle made of hardwood. Impact headwith leather cap, therefore no damage to end of
handle.ApplicationFor Phillips recess head screws.QualityBlade made of chrome-vanadium steel.
52421
Size Blade length Overall length 52421 …mm mm
1 80 180 1012 100 205 102
Size Blade length Overall length 52421 …mm mm
3 150 270 1034 200 330 104
52421
ß Hand tools
eng/OP www.hhw.de 52.11
5
Phillips screwdrivers PH
ßTypeOutput: DIN 5260 PH, ISO 8764 PH. Full-length hexagonal blade with impact cap,hardened, with nicromatt surface, dazzle-free andnon-peeling, Black-Point tip, tempered hexagonalshoulder on tang for using a wrench and Kraftform
handle with roll stop.ApplicationFor Phillips recess head screws.QualityBlade made of high-alloyed special vanadiumsteel.
52427
Set contents Size x Blade length 52427 …mm
3-part 1 x 80 / 2 x 100 / 3 x 150 101
Size Blade length Overall length 52434 …mm mm
1 80 161 1012 100 198 102
Size Blade length Overall length 52434 …mm mm
3 150 262 103
52427 - 52434
Phillips screwdrivers PH
0Type Output: DIN 5260 PH, ISO 8764 PH. Hexagonal blade with hexagonal shoulder on tangfor using a wrench, full-hardened, matt-chrome
finish, blackened tip. Multi-component handle with extra large softzone and attachment eye. Quality Blade made of chrome-vanadium-molybdenumsteel.
52437
Size Blade length Overall length 52437 …mm mm
1 80 180 1012 100 212 102
Size Blade length Overall length 52437 …mm mm
3 150 262 103
52437
Phillips screwdrivers PH
+Type Output: DIN 5260 PH, ISO 8764 PH.Hexagonal blade with hexagonal shoulder on tangfor using a wrench, full-hardened, matt-chromefinish. ChromTop tip. SoftFinish® handle with roll
stop.Application For Phillips recess head screws. Quality Blade made of high-quality chrome-vanadium-molybdenum steel.
52438
Size Blade length Overall length 52438 …mm mm
1 80 186 1012 100 213 102
Size Blade length Overall length 52438 …mm mm
3 150 268 103
52438
Set of Phillips screwdrivers PH
+TypeOutput: DIN 5260 PH, ISO 8764 PH. Hexagonal blade with hexagonal shoulder on tangfor using a wrench, full-hardened, matt-chromefinish. ChromTop tip. SoftFinish® handle with rollstop and steel plate.
ApplicationFor Phillips recess head screws.QualityBlade made of high-quality chrome-vanadium-molybdenum steel.
52439
Set contents Size x Blade length 52439 …mm
3-part 1 x 80 / 2 x 100 / 3 x 150 201
52439
Phillips screwdriver PH/The chisel-screwdriver
sTypeOutput: DIN 5260 PH, ISO 8764 PH.Full-length hexagonal blade, impact cap andhexagonal shoulder on tang for using a wrench. BlackPoint tip, exceptionally tough tempered. Soft zone
Kraftform® handle with roll stop.ApplicationFor Phillips recess head screws.QualityBlade made of 73 Mo V 5 2.
52443
Size Blade length Overall length 52443 …mm mm
1 80 178 1022 100 205 103
Size Blade length Overall length 52443 …mm mm
3 150 262 1044 200 317 105
52443
eng/OP
• Phillips screwdrivers PH • ESD/EGB screwdrivers PH • Electrician’s screwdrivers PH
www.hhw.de52.12
5
Phillips screwdrivers PH
sTypeOutput: DIN 5260 PH, ISO 8764 PH.With Lasertip (size 1 - 3), hexagonal blade,nicromatt, hexagonal shoulder on tang for using a
wrench (size 1 - 3 and soft zone Kraftform®
handle with roll stop.ApplicationFor Phillips recess head screws.QualityBlade made of 73 Mo V 5 2.
52444
Size Blade length Overall length 52444 …mm mm
0 60 141 1011 80 178 102
Size Blade length Overall length 52444 …mm mm
2 100 205 1033 150 262 104
52444
ESD/EGB Phillips screwdrivers PH
sTypeOutput: DIN 5260 PH, ISO 8764 PH. Round blade,Black-Point tip, Kraftform® handle with roll stop.
ApplicationFor Phillips recess head screws. For application withelectronic construction parts with risk of electrosta-tics. Fulfils the standard EN 100-015 part 1.QualityBlade made of high-alloyed special steel.
Size Blade length Overall length 52445 …mm mm
0 60 157 1011 80 177 102
Size Blade length Overall length 52445 …mm mm
2 100 198 104
52445 104
52445
VDE electrician’s screwdrivers PH
ßTypeOutput: DIN 5260 PH, ISO 8764 PH. Routine-te-sted in compliance with VDE 0680/T201, IEC 900,norm DIN 7438, Black-Point tip and Kraftform
handle.ApplicationFor Phillips recess head screws.QualityBlade burnished, insulated.
52446
Set contents Size x Blade length 52446 …mm
3-part 1 x 80 / 2 x 100 / 3 x 150 101
Size Blade length Overall length 52448 …mm mm
0 80 165 1011 80 170 102
Size Blade length Overall length 52448 …mm mm
2 100 200 1033 150 260 104
52446 - 52448
52445 101-102
VDE electrician’s screwdrivers PH
0Type Output: DIN 5260 PH, ISO 8764 PH. Routine-te-
sted in compliance with DIN EN 60900 (IEC 900),DIN 7438.QualityBlade burnished, insulated.
52451
Set contents Size x Blade length 52451 …mm
3-part 1 x 80 / 2 x 100 / 3 x 150 101
52451
Size Blade length Overall length 52451 …mm mm
0 60 146 2011 80 187 202
Size Blade length Overall length 52451 …mm mm
2 100 219 2033 150 269 204
Size Blade length Overall length 52440 …mm mm
1 80 191 1012 100 218 102
VDE electrician’s screwdrivers PH52440
+TypeOutput: DIN 7438, DIN ISO 8764.Routine-tested, IEC 60900:2004.SoftFinish® handle with roll stop. The protectiveinsulation is completely integrated in the front part ofthe blade. 38 mm constant thin diameter: this
ensures that screws or springs can be reached evenin hard-to-reach places.ApplicationFor Phillips recess head screws.QualityBlade made of chrome-vanadium-molybdenumsteel, full-hardened, burnished.
52440
ß Hand tools
eng/OP www.hhw.de 52.13
5
52453 201
52453 205
VDE electrician’s screwdrivers PH
+TypeOutput: DIN 7438, ISO 8764 PH. Routine-tested, DIN EN 60900 (IEC 900). SoftFi-nish® handle with roll stop.
ApplicationFor Phillips recess head screws.QualityBlade made of chrome-vanadium-molybdenumsteel, full-hardened, burnished.
52449
Set contents Size x Blade length 52449 …mm
3-part 1 x 80 / 2 x 100 / 3 x 150 101
Size Blade length Overall length 52450 …mm mm
0 60 164 1001 80 191 101
Size Blade length Overall length 52450 …mm mm
2 100 218 1023 150 274 103
52449 - 52450
VDE electrician’s screwdrivers PH
sTypeOutput: DIN 5260 PH, ISO 8764 PH.Blade burnished, insulated. With Lasertip (size 1 -3). Routine-tested, standard: IEC 60900:2004.Ergonomically optimised soft zone Kraftform®
handle with roll stop.
ApplicationFor Phillips recess head screws.QualityBlade made of 73 Mo V 5 2.
52452
Size Blade length Overall length 52452 …mm mm
0 60 161 1011 80 178 1022 100 205 103
Size Blade length Overall length 52452 …mm mm
3 150 262 1044 200 312 105
52452
VDE electrician’s screwdrivers PH
,TypeOutput: DIN/ISO 8764-1. Routine-tested, DIN EN 60900 (IEC 900), standardDIN 7438. Blade with matt-chrome finish, full-harde-ned, tip burnished. Ergonomic 3-component handle,impact-proof. Permanent colour coding on bothhandle ends (for PH = red).
ApplicationFor Phillips recess head screws.QualityBlade made of vanadium-extra steel.
52453 202-204
Size Blade length Overall length 52453 …mm mm
0 75 162 2011 80 202 2022 100 222 203
Size Blade length Overall length 52453 …mm mm
3 150 272 2044 200 361 205
52453
VDE electrician’s screwdriver for PH/slotted screws
sTypeOutput: For both Phillips and slotted screws.Blade insulated. Routine-tested, standard: IEC60900:2004. Ergonomically optimised soft zoneKraftform® handle with roll stop.
ApplicationFor PlusMinus screws Phillips/slotted screws.QualityBlade made of 73 Mo V 5 2.
52436
Size Blade length Overall length 52436 …mm mm
1 80 178 1012 100 205 102
52436
eng/OP
• Phillips screwdrivers PH
www.hhw.de52.14
5
Pozidriv screwdrivers PZ
ßTypeOutput: DIN 5260 PZ, ISO 8764 PZ. Round blade, hardened, with nicromatt surface,non-dazzle and non-peeling, Black Point tip andblack Kraftform handle with roll stop.
ApplicationFor Pozidriv/Supadriv cross head screws.QualityBlade made of high-alloyed special vanadiumsteel.
52455
Set contents Size x Blade length 52455 …mm
3-part 1 x 80 / 2 x 100 / 3 x 150 101
Size Blade length Overall length 52458 …mm länge mm
1 80 161 1022 100 198 103
Size Blade length Overall length 52458 …mm länge mm
3 150 262 104
52455 - 52458
Pozidriv screwdrivers PZ
0Type Round blade, full-hardened, glossy nickel-plated.Multi-component handle with extra large softzone and attachment eye.
Quality Blade made of chrome-vanadium steel. 52481
Set contents Size x Blade length 52481 …mm
3-part 1 x 80 / 2 x 100 / 3 x 150 101
Size Blade length Overall length 52482 …mm mm
0 60 146 1011 80 187 102
Size Blade length Overall length 52482 …mm mm
2 100 219 1033 150 269 104
52481 - 52482
Pozidriv screwdrivers PZ
+TypeOutput: DIN 5260 PZ, ISO 8764 PZ. Round blade, full-hardened, matt-chrome finish.ChromTop tip. SoftFinish® handle with roll stop.
ApplicationFor Pozidriv/Supadriv cross head screws.QualityBlade made of high-quality chrome-vanadium-molybdenum steel.
52459
Size Blade length Overall length 52459 …mm mm
0 60 164 2011 80 191 202
Size Blade length Overall length 52459 …mm mm
2 100 218 2033 150 274 204
52459
Pozidriv screwdrivers PZ
sTypeOutput: DIN 5260 PZ, ISO 8764 PZ.Round blade, nicromatt, with Lasertip (size 1 - 3)and soft zone Kraftform® handle with roll stop.ApplicationFor Pozidriv screws.QualityBlade made of 73 Mo V 5 2.
Note:Blade length 25 mm handle made of one-compo-nent material w/o. soft zones.
52460
52460 204-205
Size Blade length Overall length 52460 …mm mm
0 60 141 2001 80 178 201
L 1 200 298 208XL 1 300 398 206
2 100 205 202
Size Blade length Overall length 52460 …mm mm
L 2 200 305 209XL 2 300 405 207
3 150 262 20301 25 79 20402 25 79 205
52460
ß Hand tools
eng/OP www.hhw.de 52.15
5
Pozidriv screwdrivers PZ
+Type Output: DIN 5260 PZ, ISO 8764 PZ. Round blade, fully glossy nickel-plated, full-harde-ned, with hexagonal shoulder on tang for using awrench and handle made of hardwood. Impact headwith leather cap, therefore no damage to end ofhandle.
Application For Pozidriv/Supadriv cross head screws. Quality Blade made of chrome-vanadium steel.
52480
Size Blade length Overall length 52480 …mm mm
1 80 180 2012 100 205 202
Size Blade length Overall length 52480 …mm mm
3 150 270 203
52480
Pozidriv screwdrivers PZ
0Type Output: DIN 5260 PZ, ISO 8764 PZ. Hexagonal blade with hexagonal shoulder on tangfor using a wrench, full-hardened, matt-chromefinish, blackened tip. Multi-component handle withextra large soft zone and attachment eye.
Quality Blade made of chrome-vanadium-molybdenumsteel.
52454
Size Blade length Overall length 52454 …mm mm
1 80 180 1012 100 212 102
Size Blade length Overall length 52454 …mm mm
3 150 262 103
52454
Phillips screwdriver PZ/The chisel-screwdriver
sTypeOutput: DIN 5260 PZ, ISO 8764 PZ.Full-length hexagonal blade with impact plate andhexagonal shoulder on tang for using a wrench.Black Point tip, exceptionally tough tempered. Softzone Kraftform® handle with roll stop.
ApplicationFor Pozidriv cross head screws.QualityBlade made of 73 Mo V 5 2.
52461
Size Blade length Overall length 52461 …mm mm
1 80 178 2022 100 205 203
Size Blade length Overall length 52461 …mm mm
3 150 262 2044 200 317 205
52461
Pozidriv screwdrivers PZ
sTypeOutput: DIN 5260 PZ, ISO 8764 PZ. With Lasertip(size 1 - 3), hexagonal blade, nicromatt, hexagonalshoulder on tang for using a wrench (size 1 - 3) andsoft zone Kraftform® handle with roll stop.
ApplicationFor Pozidriv cross head screws.QualityBlade made of 73 Mo V 5 2.
52462
Size Blade length Overall length 52462 …mm mm
0 60 141 1001 80 178 101
Size Blade length Overall length 52462 …mm mm
2 100 205 1023 150 262 103
52462
eng/OP
• Electrician’s screwdrivers PZ • Sets of screwdrivers
www.hhw.de52.16
5
VDE electrician’s screwdrivers PZ
ßTypeOutput: DIN 5260 PZ, ISO 8764 PZ. Routine-te-sted in compliance with VDE 0680/T 201, IEC900, Black-Point tip and Kraftform handle.
ApplicationFor Pozidriv/Supadriv cross head screws.QualityBlade burnished, insulated.
52466
Set contents Size x Blade length 52466 …mm
3-part 1 x 80 / 2 x 100 / 3 x 150 101
Size Blade length Overall length 52467 …mm mm
0 80 165 1011 80 170 102
Size Blade length Overall length 52467 …mm mm
2 100 200 1033 150 260 104
52466 - 52467
VDE electrician’s screwdrivers PZ
0Type Output: DIN 5260 PZ, ISO 8764 PZ. Routine-tested in compliance with DIN EN 60900(IEC 900), DIN 7438.
QualityBlade burnished, insulated. 52478
Set contents Size x Blade length 52478 …mm
3-part 1 x 80 / 2 x 100 / 3 x 150 101
Size Blade length Overall length 52479 …mm mm
0 60 146 1011 80 187 102
Size Blade length Overall length 52479 …mm mm
2 100 219 1033 150 269 104
52478 - 52479
Set contents Size x Blade length 52465 …mm
3-part 1 x 80 / 2 x 100 / 3 x 150 101
Size Blade length Overall length 52465 …mm mm
0 60 164 2011 80 191 202
Size Blade length Overall length 52465 …mm mm
2 100 218 2033 150 324 204
VDE electrician’s screwdrivers PZ
+Type Output: DIN 7438, ISO 8764 PZ. Routine-tested, DIN EN 60900 (IEC 900). SoftFi-nish® handle with roll stop.Application For Pozidriv/Supadriv cross head screws.
Quality Blade made of chrome-vanadium-molybdenumsteel, full-hardened, burnished.
52465
52465
Size Blade length Overall length 52495 …mm mm
1 80 191 1012 100 218 102
VDE electrician’s screwdrivers PZ52495
+TypeOutput: DIN 7438, DIN ISO 8764.Routine-tested, IEC 60900:2004.SoftFinish® handle with roll stop. The protectiveinsulation is completely integrated in the front part ofthe blade. 38 mm constant thin diameter: thisensures that screws or springs can be reached evenin hard-to-reach places.
ApplicationFor Pozidriv/Supadriv cross head screws.QualityBlade made of chrome-vanadium-molybdenumsteel, full-hardened, burnished.
52495
ß Hand tools
eng/OP www.hhw.de 52.17
5
VDE electrician’s screwdrivers PZ
sTypeOutput: DIN 5260 PZ, ISO 8764 PZ.Blade burnished, insulated. With Lasertip (size 1 -3). Routine-tested, standard: IEC 60900: 2004.Soft zone Kraftform handle with roll stop.
ApplicationFor Pozidriv cross head screws.QualityBlade made of 73 Mo V 5 2.
52468
Size Blade length Overall length 52468 …mm mm
0 60 161 2011 80 178 2022 100 205 203
Size Blade length Overall length 52468 …mm mm
3 150 262 2044 200 312 205
52468
VDE electrician’s screwdriver for PZ/slotted screws
sTypeOutput: For both Pozidriv and slotted screws.Blade insulated. Routine-tested, standard: IEC60900:2004. Ergonomically optimised soft zoneKraftform® handle with roll stop.
ApplicationFor PlusMinus screws Pozidriv/slotted screws.QualityBlade made of 73 Mo V 5 2.
52491
Size Blade length Overall length 52491 …mm mm
1 80 178 1012 100 205 102
52491
Sets of screwdrivers, assorted
ßTypeOutput: Q DIN 5264 A, ISO 2380,D DIN 5260 PH, ISO 8740 PH,E DIN 5260 PZ, ISO 8740 PZ.Blade hardened throughout, with nicromatt surface,non-dazzle and non-peeling, Black Point tip andKraftform handle with roll stop.QualityBlade made of high-alloyed special vanadiumsteel.
52469 201-203Type6-part, round blade.
52469 204Type6-part, full-length hexagonal blade with impact plate,hardened, tempered hexagonal shoulder on tang forusing a wrench.
52469 202
52469 201
52469 203
52469 204
52469
Contents 1 ea. 52469 …
Q 4 x 100 mm / 5 x 100 mm / 7 x 150 mm / voltage tester 3 x 146 mm, 150-250 Volt 201D PH 1/80 / PH 2/100Q 3 x 80 mm / 4 x 100 mm / 5 x 100 mm / 7 x 150 mm, 202E PZ 1/80 / PZ 2/100Q 3 x 80 mm / 4 x 100 mm / 5 x 100 mm / 7 x 150 mm, 203D PH 1/80 / PH 2/100Q 3,5 x 75 mm / 4,5 x 90 mm / 5,5 x 100 mm / 7 x 125 mm, 204D PH 1/80 / PH 2/100
Performance requires quality.www.atorn.com
Screwdrivers by ATORN:
ATORN‘s high-quality hand tools.
eng/OP
• Sets of screwdrivers
www.hhw.de52.18
5
Sets of screwdrivers, assorted
0Type Output: Q DIN 5264 A, ISO 2380. D DIN 5260 PH, ISO 8740 PH. E DIN 5260 PZ, ISO 8740 PZ. Blade full-hardened. Multi-component handle withextra large soft zone and attachment eye. Incardboard box.Quality Blade made of chrome-vanadium steel.
52472 099-100 Type Round blade, glossy nickel-plated.
52472 101-102 Type Hexagonal blade with hexagonal shoulder on tangfor using a wrench, with matt-chrome finish,blackened tip.
52472 099
Contents 1 ea. 52472 …
Q 4,0 x 100 / 5,5 x 125 / 6,5 x 150 / 8 x 175, 099D PH 1/80 / PH 2/100Q 4,0 x 100 / 5,5 x 125 / 6,5 x 150 / 8 x 175, 100E PZ 1/80 / PZ 2/100Q 4,5 x 90 mm / 5,5 x 100 mm / 6,5 x 125 mm / 8 x 150 mm, 101D PH 1/80 / PH 2/100Q 5,5 x 100 mm / 6,5 x 125 mm / 8 x 150 mm, 102D PH 1/80 / PH 2/100 / PH 3/150,E PZ 1/80 / PZ 2/100
52472 100
52472 101
52472 102
52472
Sets of screwdrivers, assorted
sType6-part, round blade, nicromatt, with Lasertip andKraftform handle with roll stop, multi-component.With rack.QualityBlade made of 73 Mo V 5 2.
52492 101Output:Q DIN 5264 A, ISO 2380,D DIN 5260 PH, ISO 8764 PH.
52492 102Output:Q DIN 5264 A, ISO 2380,D DIN 5260 PH, ISO 8764 PH,E ISO 8764 PZ.
51492 101 52492 102
Contents 1 ea. 52492 …
Q 3,0 x 80 mm / 4,0 x 100 mm / 5,5 x 125 mm / 6,5 x 150 mm, 101D PH 1/80 / PH 2/100Q 4,0 x 100 mm / 5,5 x 125 mm, 102D PH 1/80 / PH 2/100,E PZ 1/80 / PZ 2/100
52492
Sets of screwdrivers, assorted
sType6-part, full-length hexagonal blade and hexagonalshoulder on tang for using a wrench. Soft zoneKraftform® handle with roll stop. With rack.QualityBlade made of 73 Mo V 5 2.
52470TypeOutput:Q DIN 5264 A, ISO 2380,D DIN 5260 PH, ISO 8740 PH.The chisel-screwdriver. With impact cap andBlack-Point tip, exceptionally tough tempered.
52471TypeOutput:Q DIN 5264 A, ISO 2380,E DIN 5260 PZ, ISO 8740 PZ.Kraftform. With Lasertip, nicromatt.
52470 101 52470 102
52471 201 52471 202
Contents 1 ea. 52470 … 52471 …
Q 3,5 x 75 mm / 4,5 x 90 mm / 5,5 x 100 mm / 7 x 125 mm, 101 201D PH 1/80 / PH 2/100Q 3,5 x 75 mm / 4,5 x 90 mm / 5,5 x 100 mm / 7 x 125 mm, 102 202E PZ 1/80 / PZ 2/100
52470 - 52471
ß Hand tools
eng/OP www.hhw.de 52.19
5
Sets of stainless steel screwdrivers, assorted
sType6-part, round blade, stainless steel, with Lasertipand Kraftform handle with roll stop, multi-compo-nent. With rack.QualityBlade made of stainless steel.
52493 101TypeOutput:Q DIN 5264 A, ISO 2380,D DIN 5260 PH, ISO 8764 PH.
52493 102TypeOutput:Q DIN 5264 A, ISO 2380,E ISO 8764 PZ.
52493 103TypeOutput:Q DIN 5264 A, ISO 2380,D DIN 5260 PH, ISO 8764 PH.E ISO 8764 PZ.
52493 101
52493 102 52493 103
Contents 1 ea. 52493 …
Q 3,0 x 80 mm / 4,0 x 100 mm / 5,5 x 125 mm / 6,5 x 150 mm, 101D PH 1/80 / PH 2/100Q 3,0 x 80 mm / 4,0 x 100 mm / 5,5 x 125 mm / 6,5 x 150 mm, 102E PZ 1/80 / PZ 2/100Q 3,0 x 80 mm / 6,5 x 150 mm, 103D PH 1/80 / PH 2/100,E PZ 1/80 / PZ 2/100
52493
Set of screwdrivers, assorted
+Type Output: Q DIN 5264 A, ISO 2380, D DIN 5260 PH, ISO 8740 PH. 6-part, round blade, glossy nickel-plated, full-har-dened, with handle made of hardwood, naturalbeechwood, lacquered. Impact head with leathercap, therefore no damage to end of handle.
Quality Blade made of chrome-vanadium steel.
Note: Starting at 5,5 mm blade width full-length blade,hexagonal shoulder on tang for using a wrench andcorrugated tip against slipping.
52476
Contents 1 ea. 52476 …
3,5 x 75 mm / 4,5 x 90 mm / 5,5 x 100 mm / 7,0 x 125 mm, 201D PH 1/80 / PH 2/100
52476
Sets of screwdrivers, assorted
+Type Output: Q DIN 5264 A, ISO 2380, D DIN 5260 PH, ISO 8740 PH, E DIN 5260 PZ, ISO 8740 PZ, Blade full-hardened, matt-chrome finish. ChromToptip. SoftFinish® handle with roll stop.Quality Blade made of high-quality chrome-vanadium-molybdenum steel.
52477 101-103 Type 6-part, round blade.
52477 104 Type 6-part, hexagonal blade with hexagonal shoulder ontang for using a wrench and steel plate.
52477 101
Contents 1 ea. 52477 …
Q 3,5 x 100 mm / 4,5 x 125 mm / 5,5 x 150 mm / 6,5 x 150 mm, 101D PH 1/80 / PH 2/100Q 4,0 x 100 mm / 5,5 x 125 mm / 6,5 x 150 mm, 102D PH 1/80 / PH 2/100, E PZ 2/100D PH 1/80 / PH 2/100 / PH 3/150, 103E PZ 1/80 / PZ 2/100 / PZ 3/150Q 3,5 x 75 mm / 4,5 x 90 mm / 5,5 x 100 mm / 6,5 x 125 mm, 104D PH 1/80 / PH 2/100
52477 102
52477 103 52477 104
52477
eng/OP
• Sets of screwdrivers • Precision Electronic • ESD • VDE
www.hhw.de52.20
5
Sets of screwdrivers, assorted
,Type Output: Q DIN 5264 A, ISO 2380-1 A. D DIN/ISO 8764-1.E DIN/ISO 8764-1. 6-part, round blade, full-hardened, matt-chromefinish, burnished tip. Ergonomic 3-componenthandle, impact-proof. Permanent colour coding onboth handle ends. Quality Blade made of vanadium-extra steel.
52490 101
Contents 1 ea. 52490 …
Q 3 x 60 mm / 4 x 100 mm / 5,5 x 100 mm / 6,5 x 125 mm, 101D PH 1/75 / PH 2/100Q 3 x 60 mm / 4 x 100 mm / 5 x 100 mm / 5 x 125 mm, 102E PZ 1/75 / PZ 2/100Q 3,5 x 75 mm/ 5,5 x 100 mm, 103D PH 1/75 / PH 2/100,E PZ 1/75 / PZ 2/100
52490 102
52490 103
52490
Set of precision electronics screwdrivers
sType6-part, Kraftform Micro with roll stop and rotatablecaps, multi-component. Blade: round, nicromatt,Black-Point. In plastic stand.
63078
Contents 63078 …
For slotted screws 0,3 x 1,8 / 0,4 x 2,0 / 0,4 x 2,5 / 0,5 x 3,0. Phillips PH 00 / PH 0 101For slotted screws 0,4 x 2,5 / 0,5 x 3,0 / 0,6 x 3,5 / 0,8 x 4,0. Phillips PH 0 / PH 1 102TORX® TX 7 / 8 / 9 / 10 / 15 / 20 103Hexagon, solid size 0,9 / 1,3 + ball head size 1,5 / 2 / 2,5 / 3 104Hexagon, hollow size 2 / 2,5 / 3 / 3,5 / 4 / 5 105
63078
Set of EGB screwdrivers
sType6-part, Kraftform Micro with roll stop and rotatablecaps, multi-component. Blade: round, nicromatt,Black-Point. In plastic stand.
Set contents:Screwdriver 0,25 / 0,23 / 0,30 and 0,40.Phillips screwdriver PH 0 and PH 1.
63099
Contents 63099 ...
6-part 101
63099
ScrewdriverBlade thickness Blade width Blade lengthstärke mm mm mm0,25 1,2 400,23 1,5 400,30 1,8 600,40 2,5 80
Phillips screwdriverSize Blade length
mmPH 0 60PH 1 80
ß Hand tools
eng/OP www.hhw.de 52.21
5
Set of VDE screwdrivers, assorted
ßType6-part, routine-tested in compliance with VDE0680/T 201, IEC 900, Black-Point tip and Kraftformhandle.QualityBlade made of high-alloyed special vanadiumsteel.
52473 101Output:Q DIN 5264 A, ISO 2380,D DIN 5260 PH, ISO 8740 PH.
52473 102Output:Q DIN 5264 A, ISO 2380,E DIN 5260 PZ, ISO 8740 PZ.
52473
Contents 1 ea. 52473 …
Q 2,5 x 80 mm / 3,5 x 100 mm / 4 x 100 mm / 5,5 x 125 mm, 101D PH 1/80 / PH 2/100Q 2,5 x 80 mm / 3,5 x 100 mm / 4 x 100 mm / 5,5 x 125 mm, 102E PZ 1/80 / PZ 2/100
52473
Set of VDE screwdrivers, assorted
0Type Output: Q DIN 5264 A, ISO 2380. D DIN 5260 PH, ISO 8740 PH. 7-part, Routine-tested in compliance with DINEN 60900 (IEC 900), Norm DIN 7438.
QualityBlade burnished, insulated. 52483
Contents 1 ea. 52483 …
Q 2,5 x 75 / 4 x 100 / 5,5 x 125 / 6,5 x 150, 101Q voltage tester 3 x 140 mm, 150 - 250 Volt,D PH 1/80 / PH 2/100
52483
Set of VDE screwdrivers, assorted
+TypeOutput: Q DIN 5264 A, ISO 2380. D DIN 5260 PH, ISO 8740 PH.6-part, routine-tested, DIN EN 60900 (IEC 900).SoftFinish® handle with roll stop.
Quality Blade made of chrome-vanadium-molybdenumsteel, full-hardened, burnished.
52474
Contents 1 ea. 52474 …
Q 3 x 100 mm / 4 x 100 mm / 5,5 x 125 mm / 6,5 x 150 mm, 101D PH 1/80 / PH 2/100
52474
Set of VDE screwdrivers, assorted
sTypeOutput: Q DIN 5264 A, ISO 2380,D DIN 5260 PH, ISO 8740 PH.7-part, routine-tested, standard: IEC 60900:2004.Blade burnished, insulated. With Lasertip (2,5 x 80mm without). Soft zone Kraftform® handle with rollstop. With rack.
QualityBlade made of 73 Mo V 5 2. 52475
Contents 1 ea. 52475 …
Q 2,5 x 80 mm / 3,5 x 100 mm / 4 x 100 mm / 5,5 x 125 mm, 201D PH 1/80 / PH 2/100Q voltage tester 3,0 x 70 mm
52475
eng/OP
• Set of VDE screwdrivers
www.hhw.de52.22
5
Set of VDE screwdrivers, assorted
,TypeRoutine-tested, DIN EN 60900 (IEC 900). Blade,full-hardened, matt-chrome finish, burnished tip.Ergonomic 3-component handle, impact-proof.Permanent colour coding on both handle ends. Quality Blade made of vanadium-extra steel.
52486 201 5-part, output: Q DIN 5264 A, ISO 2380-1 A,D DIN/ISO 8764-1.
52486 203 7-part, output: Q DIN 5264 A, ISO 2380-1 A,E DIN/ISO 8764-1.
52486 201
Contents 1 ea. 52486 …
Q 3 x 100 / 4 x 100 / 5 x 125, 201D PH 1/80 / PH 2/100Q 2,5 x 75 / 3 x 100 / 4 x 100 / 5,5 x 125, 203E PZ 0/60 / PZ 2/100 / PZ 3/150
52486 203
52486
Set of VDE reversible screwdrivers
BType14-part, routine-tested in compliance withDIN/ISO 60900:2004. With 12 IEC exchangeableblades, 2-component handle and turning cap, in
robust sheet steel box. The blades are securely heldinside the handle, automatic lock against unintendedpulling out. Attachable turning cap and soft zone forusage as precision tool.
52488
52488
Contents 1 ea. 52488 …
Q 2,5 x 0,4 / 3,0 x 0,5 / 3,5 x 0,6 / 4,0 x 0,8 / 5,5 x 1,0 / 6,5 x 1,2 mm, 101D PH 1x80 / PH 2x100,E PZ 2x100,M T 10 / T 15 / T 20,
handle 105 x 39 mm, turning cap.
VDE reversible blades
B52489 101-118 Reversible blades TypeRoutine-tested, in compliance with DIN/EN60900:2004. Attachable turning cap and soft zonefor usage as precision tool.
52489 115-116TypeFor both Phillips and slotted screws.ApplicationFor terminals, electrical cabinets, etc.
52489 117-118TypeFor both Pozidriv and slotted screws.ApplicationFor terminals, electrical cabinets, etc.
52489 201HandleTypeThe blades are securely held inside the handle,automatic lock against unintended pulling out.Application For mounting the reversible blades cat.-no. 52489101-118.
52489 101-106
52489 201
52489
Cutting edge width x thickness Size Blade length 52489 …mm mm
Q 2,5 x 0,4 – 75 101Q 3,0 x 0,5 – 100 102Q 3,5 x 0,6 – 100 103Q 4,0 x 0,8 – 100 104Q 5,5 x 1,0 – 100 105Q 6,5 x 1,2 – 100 106D – PH 1 100 107D – PH 2 100 108E – PZ 1 100 109E – PZ 2 100 110M – T 8 100 111M – T 10 100 112M – T 15 100 113M – T 20 100 114: – H 1 80 115: – H 2 100 116; – Z 1 80 117; – Z 2 100 118
Handle – – – 201
ß Hand tools
eng/OP www.hhw.de 52.23
5
Contents 1 ea. 52496 …
Q 3,0 x 0,5 / 4,0 x 0,8 / 5,5 x 1,0 / 6,5 x 1,2 mm, 101D PH 1x83 / PH 2x83,N hand grip 6 x 160 mm
Cutting edge width x thickness Size Overall length Blade length 52497 …mm mm mm
Q 2,5 x 0,4 - 83 - 101Q 3,0 x 0,5 - 83 - 102Q 4,0 x 0,8 - 83 - 103Q 5,5 x 1,0 - 83 - 104Q 6,5 x 1,2 - 83 - 105D - PH 1 83 - 108D - PH 2 83 - 109; - SL/PZ 1 83 - 111; - SL/PZ 2 83 - 112N - - 160 50 201
VDE exchangeable bits with hand grip52496 - 52497
+52496 101Type7-part set, consists of- 6 exchangeable bits (cat.-no. 52497 102-109) and- 1 hand grip (cat.-no. 52497 201).
52497 101-112Exchangeable bitTypeHigh-quality chrome-vanadium-molybdenumsteel, full-hardened, burnished.- The insulation is sprayed directly onto the bit and is
fully integrated in the front of the blade- Routine-tested, IEC 60900:2004- 38 mm constant thin diameter: this ensures that
screws or springs can be reached even in hard-to-reach places.
- Slim bits allow for working in §§hard-to-reachplaces
- Caution: 6 mm VDE exchangeable bits are only tobe used with hand grip (cat.-no. 52497 201).
52497 201Hand gripType- Blade made of chrome-vanadium steel, full-har-
dened- Blade insulation sprayed directly on the blade.- SoftFinish® electric multi-component handle
with roll stop- Bit mount: ClicFix quick-change toolholder
securely holds bits.- Only for 6 mm VDE exchangeable bits (cat.-no.
52497 101-112)- Caution: Do not use for bits of the shapes C 6,3
and E 6,3
52496
52497 101-105
52497 108-109
52497 111-112
52497 201
52494 101
52494 102
VDE reversible screwdriver set
sTypeRoutine-tested, standard: IEC 60900:2004.Blades burnished, insulated, length 154 mm. Drive 9mm Hexagon with insertion chamfer. VDE holderwith Kraftform handle with roll stop, multi-compo-nent, length 102 mm. In case.
52494 101Type7-part.
52494 102Type18-part. With 4 wrenches for switch cabinets, length89 mm.
52494 …
Handle 102 mm, 101Q 2,5 x 0,4 mm / 3,5 x 0,6 mm / 4,0 x 0,8 mm / 5,5 x 1,0 mm,E PZ 0 / PZ 1.
Handle 102 mm, 102Q voltage tester 3,0 x 0,5 x 70 mm,Q 2,5 x 0,4 mm / 3,5 x 0,6 mm / 4,0 x 0,8 mm / 5,5 x 1,0 mm,D PH 1 / PH 2,: # 1 / # 2,E PZ 1 / PZ 2,; # 1 / # 2,7 6,3 x 89 mm,7 8,1 x 89 mm,6 89 mm,- 89 mm.
52494
eng/OP
• TORX® screwdrivers
www.hhw.de52.24
5
TORX® screwdrivers
ßTypeRound blade, hardened, with nicromatt surface,non-dazzle and non-peeling, Black Point tip andKraftform handle with roll stop. Set in cardboard box.ApplicationFor inner TORX® screws.
QualityBlade made of high-alloyed special vanadiumsteel.
Note:TORX® selector see cat.-no. 37930.
52520
Set contents Size 52520 …T
5-part 10 / 15 / 20 / 25 / 30 1017-part 8 / 9 / 10 / 15 / 20 / 25 / 30 102
Size Blade length Overall length 52528 …T mm mm6 60 130 2027 60 130 2038 60 130 2049 60 141 205
10 80 161 20615 80 178 207
Size Blade length Overall length 52528 …T mm mm
20 100 198 20825 100 198 20927 115 213 21030 115 213 21140 130 242 21245 130 242 213
52520 - 52528
TORX® screwdriver with hole
0Type Round blade, full-hardened, matt-chrome finish,blackened tip. Multi-component handle with extralarge soft zone and attachment eye. T6 - T9without hole, T10 - T40 with hole, for application onTORX® screws and TORX® safety screws (with pilotpin).
Application For inner TORX® screws. Quality Blade made of chrome-vanadium steel.
Note: TORX® selector see cat.-no. 37930.
52529
Set contents Size 52529 …T
5-part 10 / 15 / 20 / 25 / 30 1017-part 8 / 9 / 10 / 15 / 20 / 25 / 30 102
Size Blade length Overall length 52529 …T mm mm6 60 146 2017 60 146 2028 60 146 2039 60 157 204
10 80 170 20515 80 180 206
Size Blade length Overall length 52529 …T mm mm
20 100 200 20725 100 200 20827 115 227 20930 115 227 21040 130 242 211
52529
TORX® screwdrivers
+TypeRound blade, full-hardened, matt-chrome finish.ChromTop tip. SoftFinish® handle with roll stop.ApplicationFor inner TORX® screws.
QualityBlade made of high-quality chrome-vanadium-molybdenum steel.
Note:TORX® selector see cat.-no. 37930.
52530
Size Blade length Overall length 52530 …T mm mm3 60 164 2014 60 164 2025 60 164 2036 60 164 2047 60 164 2058 60 164 2069 60 171 207
10 80 191 208
Size Blade length Overall length 52530 …T mm mm
15 80 191 20920 100 211 21025 100 211 21127 115 233 21230 115 233 21340 130 254 21445 130 254 215
Set contents Size 52530 …T
6-part 10 / 15 / 20 / 25 / 30 / 40 100
52530
ß Hand tools
eng/OP www.hhw.de 52.25
5
TORX® screwdrivers
sTypeRound blade, nicromatt, Black-Point tip and softzone Kraftform handle with roll stop.ApplicationFor inner TORX® screws.
QualityBlade made of 73 Mo V 5 2.
Note:TORX® selector see cat.-no. 37930.
52531
52531
Size Blade length Overall length 52531 …T mm mm5 60 141 1016 60 141 1027 60 141 1038 60 141 1049 60 141 105
10 80 161 10615 80 178 107
Size Blade length Overall length 52531 …T mm mm
20 100 198 10825 100 205 10927 115 220 11030 115 220 11140 130 242 11245 130 242 113
52534 201-205
52534 209
TORX® screwdrivers (MagicSpring)
+TypeRound blade, full-hardened, with matt-chromefinish, ChromTop® tip. With MagicSpring holdingspring, SoftFinish® handle with roll stop.ApplicationFor inner TORX® screws.QualityBlade made of high-quality chrome-vanadium-molybdenum steel.
Note:TORX® selector see cat.-no. 37930.
52532
Size Blade length Overall length 52532 …T mm mm6 60 164 2017 60 164 2028 60 164 2039 60 171 204
Size Blade length Overall length 52532 …T mm mm
10 80 191 20515 80 191 20620 100 218 20725 100 218 208
The holding spring is laser-weldedto the tip of the tool in conjunctionwith a covering disc.
The MagicSpring generates aclamping between the tool and theTORX® or TORX PLUS® screw, sothat the screw is held safely.
52532
TORX® screwdriver with hole
,TypeRound blade, full-hardened, matt-chrome finish,burnished tip. With hole, which allows the applicati-on with TORX® screws and with TORX® safetyscrews (with pilot pin). Ergonomic 3-componenthandle, impact-proof. Permanent colour coding onboth handle ends (for TORX® = green).Application For inner TORX® screws.
Quality Blade made of vanadium-extra steel.
Note: TORX® selector see cat.-no. 37930.
52534 206-208
Size Blade length Overall length 52534 …T mm mm7 75 197 2018 75 197 2029 75 197 203
10 75 197 20415 100 222 205
Size Blade length Overall length 52534 …T mm mm
20 100 222 20625 125 247 20727 125 247 20830 150 272 20940 150 311 210
52534 210
52534
eng/OP
• TORX® screwdrivers • Ball head screwdrivers
www.hhw.de52.26
5
TORX® screwdriver with holding device
sRound blade, nicromatt. With holding device. Softzone Kraftform handle with roll stop. With rack.Application Inner TORX® screws in compliance with specificati-on Camcar Textron. TORX® with holding device:The tools are pressed into the drive profile of thescrew manufactured in compliance CAMCARTEXTRON specifications by means of: the drivershoulders (conical in respect to the tool tip), theadditional optimisation of the shoulder area and inconjunction with the perfect insertion depth.
Quality Blade made of 73 Mo V 5 2.
Note: TORX® selector see cat.-no. 37930.
52539 101
Set contents Size 52539 …T
6-part 10 / 15 / 20 / 25 / 30 / 40 10152539 199-207
52539
VDE TORX® screwdrivers
+Type Routine-tested, DIN EN 60900 (IEC 900). SoftFi-nish® handle with roll stop.Application For inner TORX® screws.
Quality Blade made of chrome-vanadium-molybdenumsteel, full-hardened, burnished.
Note:TORX® selector see cat.-no. 37930.
52533
Size Blade length Overall length 52533 …T mm mm
10 60 164 10615 80 191 10720 80 191 108
Size Blade length Overall length 52533 …T mm mm
25 80 198 10930 100 218 111
52533
VDE TORX® screwdrivers
sTypeRoutine-tested, IEC 60900:2004. Ergonomicallyoptimised soft zone Kraftform® handle with rollstop.ApplicationFor inner TORX® screws.
QualityBlade made of 73 Mo V 5 2.
Note:TORX® selector see cat.-no. 37930.
52535
Size Blade length Overall length 52535 …T mm mm
10 80 161 10115 80 178 10220 80 178 103
Size Blade length Overall length 52535 …T mm mm
25 100 205 10430 100 205 105
52535
Size Blade length Overall length 52539 …T mm mm8 60 141 1999 60 141 200
10 80 161 20115 80 178 20220 100 198 203
Size Blade length Overall length 52539 …T mm mm
25 100 205 20427 115 220 20530 115 220 20640 130 242 207
TORX® screwdriver with ball head
sTypeRound blade, nicromatt, Black-Point tip and softzone Kraftform handle with roll stop.ApplicationFor inner TORX® screws.
QualityBlade made of 73 Mo V 5 2.
Note:TORX® selector see cat.-no. 37930.
52538
Size Blade length Overall length 52538 …T mm mm
15 80 178 10120 100 198 10225 100 205 103
Size Blade length Overall length 52538 …T mm mm
27 115 220 10430 115 220 105
52538
ß Hand tools
eng/OP www.hhw.de 52.27
5
Ball head screwdrivers
ßTypeHexagonal blade, with nicromatt surface, non-dazz-le and non-peeling, Black Point tip and Kraftformhandle with roll stop. Set in cardboard box.
ApplicationFor application in hard-to-reach places and up to anangle of 25°.QualityBlade made of high-alloyed special vanadiumsteel.
52540
Set contents Size 52540 …mm
5-part 3 / 4 / 5 / 6 / 8 101
Size Blade length Overall length 52545 …mm mm mm
2 100 170 2012,5 100 170 202
3 100 175 2034 100 180 204
Size Blade length Overall length 52545 …mm mm mm
5 100 190 2056 125 220 2068 150 255 207
52540 - 52545
Ball head screwdrivers
0Type Round blade, full-hardened, matt-chrome finish,blackened tip. Multi-component handle with extralarge soft zone and attachment eye.
Application For application in hard-to-reach places and up to anangle of 25°. Quality Blade made of chrome-vanadium steel.
52550
Set contents Size 52550 …mm
5-part 3 / 4 / 5 / 6 / 8 101
Size Blade length Overall length 52551 …mm mm mm
2 100 186 1012,5 100 186 102
3 100 186 1034 100 197 104
Size Blade length Overall length 52551 …mm mm mm
5 100 197 1056 125 232 1068 150 257 107
10 150 269 108
52550 - 52551
Ball head screwdrivers
+Type Hexagonal blade, full-hardened, matt-chromefinish. SoftFinish® handle with roll stop.Application For application in hard-to-reach places and up to anangle of 25°.
Quality Blade made of chrome-vanadium steel.
Note:Size 3 - 8 mm with MagicRing.
52546 201-203
Size Blade length Overall length 52546 …mm mm mm1,5 75 179 201
2 100 204 2022,5 100 204 203
3 100 204 204
Size Blade length Overall length 52546 …mm mm mm
4 100 211 2055 100 211 2066 125 243 2078 150 268 208
52546
Ball head screwdrivers
sTypeHexagonal blade, nicromatt, Black-Point tip andsoft zone Kraftform handle with roll stop.
ApplicationFor application in hard-to-reach places and up to anangle of 25°.QualityBlade made of 73 Mo V 5 2.
52548
Size Blade length Overall length 52548 …mm mm mm1,5 60 130 1002,0 100 170 1012,5 100 181 1023,0 100 181 1034,0 100 198 104
Size Blade length Overall length 52548 …mm mm mm5,0 100 205 1056,0 125 230 1068,0 150 262 107
10,0 150 262 10812,0 150 267 109
52548
52546 204-208
eng/OP
• Screw-holding screwdrivers • Offset screwdriver • Combination blades
www.hhw.de52.28
5
Offset screwdrivers for slotted screws DIN 5200
+TypeFull-hardened, matt-chrome finish, with impact-proofplastic handle, black, free of cadmium. 0° and 90°.
ApplicationFor application in hard-to-reach places.QualityBlade made of chrome-vanadium steel.
52576
Cutting edge width Cutting edge thickness Leg length short Overall length 52576 …mm mm mm mm3,5 0,6 8,5 90 1014,0 0,8 9,0 100 1025,5 1,0 10,5 125 1036,5 1,2 13,5 125 1048,0 1,2 17,0 150 10510,0 1,6 24,0 175 10612,0 2,0 27,0 200 107
52576
Offset screwdrivers for Phillips screws PH DIN 5208
+TypeFull-hardened, matt-chrome finish, with impact-proofplastic handle, black, free of cadmium. Offset onboth ends.
ApplicationFor application in hard-to-reach places.QualityBlade made of chrome-vanadium steel.
52581
Size Leg length short Overall length 52581 …mm mm
1 + 2 14,5 125 1012 + 3 21,0 150 1023 + 4 25,0 200 103
52581
Screw-holding screwdrivers52558
+TypeErgonomically-shaped SoftFinish® multi-componenthandle with roll stop.ApplicationFor screwing even in hard-to-reach places. Adapter
sleeve secures the screw.QualityBlade made of chrome-vanadium steel, full-har-dened, burnished.
52558
Cutting edge width x thickness Blade length Overall length 52558 …mm mm mm
2,5 x 0,4 75 186 2013,0 x 0,5 100 211 2024,0 x 0,8 125 243 2035,0 x 1,0 150 268 204
For blade Ø For blade Ø For insulation Ø For insulation Ø 52561 …mm size mm size
4,5 - 6,0 PH/PZ 1+2 - - 101VDE - - 4,5 - 6,0 / 6,5 - 8,0 PH/PZ 1 / PH/PZ 2 102
Screw grippers52561
sType- With freewheeling sleeve for easier guidance of the
screwdriver- Functions without magnetic force.- Virtually wear-proof material- Pull-off force far above EN standard- For workshop and electric applicationsApplication1 - Push screw gripper onto the tip until the blade
protudes from the rubber part.2 - Affix the screw to the blade tip and secure it in
the gripper.3 - Pull the screw gripper further in the direction of
the handle until the gripper's arms encircle thescrew's head and are forced apart slightly.
4 - The Wera screw gripper automatically releasesthe screw after the screwing is finished! Whenthe grippers touch the surface, the are forcedapart further and snap over when the screw headis fully inserted.
5 - The screw gripper automatically moves up inblind holes. Therefore, even hard-to-reach placesare no problem.
52561 101 52561 102
1
5
4
3
2
ß Hand tools
eng/OP www.hhw.de 52.29
5
Set contents:1 SYSTEM 6 SoftFinish® telescopic handle,
Q Q 2 blades for slotted screws 4,0-6,0 / 5,5-6,5 mm,D D 1 blade for Phillips recess head screws PH 1-2,E E 1 blade for Phillips recess head screws PZ 1-2,M M 3 blades for TORX® screws T 10-15 / 20-25 / 30-40,
3 blades for hexagonal screws size 4-4 / 5-5 / 6-6 mm.
Set contents 52582 …
11-part 202
The SoftFinish® telescopic handle with Click-Stopp ball clamping guarantees secure seat andquick exchange of blades. Adjustable blade lengthfrom 42-114 mm.
Set of Vario screwdrivers
sTypeMaster set, 11-part, in sheet steel box.QualityBlade made of high-alloyed chrome-vanadium-molybdenum steel.
52586
Set contents 52586 …
11-part 101
52586
Combination blade set SYSTEM 6
+Type 11-part SYSTEM 6 SoftFinish® telescopic handlefor adjustable blade lengths from 42-114 mm.Double-sided exchangeable blades with colourcode. In rugged metal box.ApplicationEspecially suitable for dry and general applications.
QualityBlades chrome-vanadium-molybdenum steel,full-hardened, matt-chrome finish. Blade tipsWiha ChromTop®.
52582
52582
Vario screwdriver handles
sTypeWith 6 mm hexagonal mount and 10 mm hexagonalshoulder on tang for using a wrench.
52595Kraftform® handle
52596Kraftform Weralit ESD handleApplication For application with electronic construction parts withrisk of electrostatics. Tested to Norm EN 100-015Part 1.
52595
52595 … 52596 …
101 201
52596
52595 - 52596
Combination screwdriver T-handle
sTypeWith 6 mm hexagonal mount.
ApplicationFor higher torque when tightening and loosening ofseized screws..
52597
52597 …
101
52597
Combination blade extensions
TypeBlade: 6 mm hexagon.ApplicationFor combination and adapter blades (cat.-no. 52605and 52612).
QualityChrome-vanadium steel. 52600
Overall length 52600 …mm175 201
52600
Set contents:1 Kraftform handle,Combination blades, length 175 mm:
Q Q 0,6 x 4 - 1,0 x 6 / 0,8 x 5 - 1,2 x 7 mm,N N size 4 - 4 / 5 - 5 / 6 - 6 mm,D D PH 1 - 2,E E PZ 1 - 2,M M T 10 - 15 / T 20 - 25 / T 30 - 40.
eng/OP
• Combination blades • Bit assortments
www.hhw.de52.30
5
Combination blades
TypeBlade: 6 mm, hexagon, full-hardened, nicromatt.Length 175 mm.QualityChrome-vanadium-molybdenum steel.
Shape Size 52605 …
Q Q 4 x 0,6 / 6 x 1,0 110Q Q 5 x 0,8 / 7 x 1,2 111D D PH 1 / PH 2 120E E PZ 1 / PZ 2 130Q D 4 x 0,8 / PH 1 140Q D 6 x 1,0 / PH 2 141Q D 7 x 1,2 / PH 3 142D E PH 1 / PZ 1 150D E PH 2 / PZ 2 151
J U size 2,5 / 2,5 160
Shape Size 52605 …
J U size 3,0 / 3,0 161J U size 4,0 / 4,0 162J U size 5,0 / 5,0 163J U size 6,0 / 6,0 164
M M T 6 / T 8 170M M T 7 / T 9 171M M T 10 / T 15 172M M T 20 / T 25 173M M T 30 / T 40 174
52605
Adapter blades
TypeBlade: 6 mm hexagon.QualityChrome-vanadium steel.
52612 102TypeWith 1/4 inch quick-exchange mechanism andstrong permanent magnet.ApplicationFor 1/4 inch screwdriver bits.
52612 103TypeWith 1/4 inch external square output.ApplicationFor socket wrench bit 1/4 inch inner square.
52612 102
Length 52612 …mm165 102175 103
52612 103
52612
Bit assortments Kraftform Kompakt®
sType In space-saving, light and robust plastic box.
52630 101Application For manual operation in conjunction with theKraftform® handle and for machine operation inconjunction with the multi-purpose adapter.
52630 098
Set contents 52630 098:1 bit holder Kraftform® with quick-exchange mount Rapidaptor®,
M 6 bits for TORX® screws T 5 / 6 / 7 / 8 / 9 / 10, D 2 bits for Phillips recess head screws PH size 0-25 / 2-25 mm, Q 1 bit for slotted screws 0,5 x 3,0 mm.
Set contents 52630 …
Kraftform Kompakt 11 10-part 098Kraftform Kompakt 70 Allround 32-part 101
52630 101
52630
Set contents 52630 101:1 bit holder Kraftform® with quick-exchange mount Rapidaptor®,
D 3 ea. bits for Phillips recess head screws PH size 1-25 / 2-25 / 3-25 mm, E 3 ea. bits for Phillips recess head screws PZ size 1-25 / 2-25 / 3-25 mm, / 6 bits for ResisTORX® screws TX 10 / 15 / 20 / 25 / 30 / 40, J 3 bits Hexagonal-Plus for Allen screws size 4 / 5 / 6 mm, Q 3 bits for slotted screws 0,6 x 4,5 / 1,0 x 5,5 / 1,2 x 6,5 mm,
1 multi-purpose adapter with quick-exchange mount Rapidaptor N 1/4 inch / J 1/4 inch.
52605 110-111
52605 120
52605 130
52605 140-142
52605 150-151
52605 160-164
52605 170-174
ß Hand tools
eng/OP www.hhw.de 52.31
5
Bit assortment Kraftform Kompakt 50
sType 14-part, with bayonet blade. In space-saving, lightand robust plastic box. Application The bayonet blade can be partly pushed into thehandle, therefore quicker manual operation in hard-to-reach places. When you operate the locking sleeve,
the bayonet blade slides out of the handle and thetool can be used with a regular screwdriver.When you operate the locking sleeve once more,the bayonet blade can be removed and used asadapter for machine operation.
52635
Set contents 52635 101:1 bit holder bayonet Kraftform with quick-exchange mount Rapidaptor,
D 2 bits for Phillips recess head screws PH size 1-25 / 2-25 mm, E 2 bits for Phillips recess head screws PZ size 1-25 / 2-25 mm, / 6 bits for ResisTORX® screws TX 10 / 15 / 20 / 25 / 30 / 40, Q 2 bits for slotted screws 0,6 x 4,5 / 1,0 x 5,5 mm,
1 bayonet blade (connecting piece) with quick-exchange mount Rapidaptor N 1/4 inch / J 1/4inch.
Set contents 52635 …
Kraftform Kompakt 50 14-part 101
52635
Bit assortment Kraftform Kompakt 91
sType In space-saving, light and robust plastic box.
Application For manual operation in conjunction with theKraftform® one-hand ratchet for clockwise andcounterclockwise operation and for machine operati-on in conjunction with the multi-purpose adapter.
52640 201
Set contents 52640 201:1 bit one-hand ratchet Kraftform 1/4 inch with quick-exchange mount Rapidaptor,
/ 4 bits for ResisTORX® screws TX 15 / 20 / 25 / 30, D 3 bits for Phillips recess head screws PH size 1-25 / 2-25 / 3-25 mm, J 3 bits for Allen screws size 3 / 4 / 5 mm, N 5 socket wrench bits hexagonal size 5,5 / 7 / 8 / 10 / 13 mm,
1 adapter J 1/4 inch / z 1/4 inch, 1 multi-purpose adapter with quick-exchange mount Rapidaptor N 1/4 inch / J 1/4 inch.
Set contents 52640 …
Kraftform Kompakt 91 18-part 201
52640
Bit assortments Kraftform Kompakt® 60/62 (Bit length 89 mm)
sType With holder and 89 mm long bits in folding bag forattachment to the belt.
52642 101
Set contents 52642 101:1 bit one-hand ratchet Kraftform 1/4 inch with quick-exchange mount Rapidaptor,
/ 5 bits for ResisTORX® screws TX 10 / 15 / 20 / 25 / 30, ? 4 bits Hexagonal-Plus with borehole for Allen screws size 3 / 4 / 5 / 6 mm, D 3 bits for Phillips recess head screws PH size 1-89 / 2-89 / 3-89 mm, E 3 bits for Phillips recess head screws PZ size 1-89 / 2-89 / 3-89 mm, Q 1 bit for slotted screws 1,0 x 5,5 mm.
Set contents 52642 103:1 bit one-hand ratchet Kraftform 1/4 inch with quick-exchange mount Rapidaptor,
/ 8 bits for ResisTORX® screws TX 8 / 10 / 15 / 20 / 25 / 27 / 30 / 40, ? 6 bits Hexagonal-Plus with borehole for Allen screws size 2 / 2,5 / 3 / 4 / 5 / 6 mm,D 3 bits for Phillips recess head screws PH size 1-89 / 2-89 / 3-89 mm, E 3 bits for Phillips recess head screws PZ size 1-89 / 2-89 / 3-89 mm, Q 1 bit for slotted screws 1,2 x 6,5 mm. $ 4 bits for Spanner screws 1 / 2 / 3 / 4, % 3 bits for TORQ-SET® screws 6 / 8 / 10 mm, & 4 bits for TRI-WING® screws 1 / 2 / 3 / 4.
Set contents 52642 …
Kraftform Kompakt 60 17-part 101Kraftform Kompakt 62 33-part 103
52642 103
52642
eng/OP
• Bit assortments
www.hhw.de52.32
5
Special assortments
s52643 101Metal twist drill bits and bit setType19-part 1 multi-purpose adapter Rapidaptor, notmagnetic, for mounting in the power screwdriver orin the drill chuck of the electrical drill. Metal twistdrill bits and bits with 1/4 inch drive in compliancewith DIN 3126 C 6,3. In bag.
52643 102Countersinks bit setType8-part 1 holder Kraftform with quick-exchangemount, 1 multi-purpose adapter Rapidaptor, non-magnetic, for mounting in the power screwdriver orin the drill chuck of the electrical drill. Countersinkbits: 3 flutes, countersink angle 90°, countersinkhead in compliance with DIN 335 C, with 1/4 inchdrive in compliance with DIN 326 C 6,3.
52643 103
Combination taps bit setType7-part 1 multi-purpose adapter Rapidaptor, notmagnetic, for mounting in the power screwdriver orin the drill chuck of the electrical drill. Combinationtap bits: tolerance zone ISO 2 (6H), with 1/4 inchdrive in compliance with DIN 326 C 6,3.ApplicationFor drilling core holes (1), tapping (2) and deburring(3) in one operation.
52643 101
Set contents 52643 101:1 multi-purpose adapter Rapidaptor N 1/4 inch / J 1/4 inch,
* 6 metal twist drill bits 3,0 x 38 / 4,0 x 44 / 4,2 x 45 / 5,0 x 50 / 6,0 x 50 / 8,0 x 51 mm,D 6 bits for Phillips recess head screws PH 2 x size 1-25 / 3 x size 2-25 / 1 x size 3-25, M 6 bits for TORX® screws screws T 10 / 15 / 20 / 25 / 30 / 40.
Set contents 52643 102:1 bit holder Kraftform with quick-exchange mount,1 multi-purpose adapter Rapidaptor N 1/4 inch / J 1/4 inch,
+ 6 countersink bits 6,3 x 31 / 8,3 x 31 / 10,4 x 34 / 12,4 x 35 / 16,5 x 40 / 20,5 x 41 mm,
Set contents 52643 …
Metal twist drill bits and bit set 19-part 101Countersink bit set 8-part 102Combination taps bit set 7-part 103
52643 102
52643 103
(1)
(2)
(3)
52643
Set contents 52643 103:1 multi-purpose adapter Rapidaptor N 1/4 inch / J 1/4 inch,
* 6 combination taps M3 x 36 / M4 x 39 / M5 x 41 / M6 x 41 / M8 x 51 / M10 x 59.
Set contents:1 bit ratchet 1/4 inch hexagonal drive with 8 mm ring wrench (patented)
N 5 socket wrench bits size 6 / 7 / 8 / 10 / 13 mm,3 bits for slotted screws 4 / 5 / 6 mm,
D 3 bits for Phillips recess head screws PH 1 / 2 / 3,E 3 bits for Phillips recess head screws PZ 1 / 2 / 3,J 4 bits for Allen screws size 3 / 4 / 5 / 6 mm,M 5 bits for TORX® screws T 10 / 15 / 20 / 25 / 30,
1 adapter 1/4 inch square drive x 1/4 inch outside hexagon,1 Quick-Release adapter.
Set contents 52922 …
26-part 101
Bit socket wrench assortment with bit ratchet52922
,Type26-part, in plastic box. By means of the patented bitratchet (US Pat. 6860175), screws and nuts caneasily be tightened and loosened even in hard-to-re-ach places.
52922
ß Hand tools
eng/OP www.hhw.de 52.33
5
Contents 52712 …
17-part 10117-part 10232-part 10332-part 10461-part 105
Set contents 52712 101:1 quick-change toolholder 1/4 inch,
D 4 bits for Phillips recess head screws 1xPH1 / 2xPH2 / 1xPH3,E 4 bits for Phillips recess head screws 1xPZ1 / 2xPZ2 / 1xPZ3,M 8 bits for TORX® screws 1xT10 / 1xT15 / 2xT20 / 2xT25 / 1xT30 / 1xT40.
Set contents 52712 102:1 quick-change toolholder 1/4 inch,
Q 2 bits for slotted screws 4,5 / 6,5 mm,D 3 bits for Phillips recess head screws PH 1 / 2 / 3,E 3 bits for Phillips recess head screws PZ 1 / 2 / 3,J 3 bits for Allen screws size 3 / 4 / 5 mm,M 5 bits for TORX® screws T 10 / 15 / 20 / 25 / 30.
Set contents 52712 103:1 handle with 1/4 inch mount,1 bit holder,
D 9 bits for Phillips recess head screws 2xPH1 / 5xPH2 / 2xPH3,E 9 bits for Phillips recess head screws 2xPZ1 / 5xPZ2 / 2xPZ3,M 12 bits for TORX® screws 2xT10 / 2xT15 / 2xT20 / 2xT25 / 2xT30 / 2xT40.
Set contents 52712 104:1 handle with 1/4 inch mount,1 bit holder,3 bits for slotted screws 4,5 / 5,5 / 6,5 mm,
D 9 bits for Phillips recess head screws 2xPH1 / 5xPH2 / 2xPH3,E 9 bits for Phillips recess head screws 2xPZ1 / 5xPZ2 / 2xPZ3,J 3 bits for Allen screws size 4 / 5 / 6 mm,M 6 bits for TORX® screws T 10 / 15 / 20 / 25 / 30 / 40.
Set contents 52712 105:1 bit holder,
Q 4 bits for slotted screws 4,5 / 5,5 / 6,5 / 8,0 mm,D 18 bits for Phillips recess head screws 4xPH1 / 10xPH2 / 4xPH3,E 18 bits for Phillips recess head screws 4xPZ1 / 10xPZ2 / 4xPZ3,J 8 bits for Allen screws size 2x3 / 2x4 / 2x5 / 2x6 mm,M 12 bits for TORX® screws 2xT10 / 2xT15 / 2xT20 / 2xT25 / 2xT30 / 2xT40.
Bit assortments52712
052712 101-102TypeIncl. of quick-change toolholder 1/4 inch for bits withdrive C 6,3.
52712 103-104TypeIncl. of bit holder with special, free from floatclamping for bits with drive C 6,3 and E 6,3 and 2-component handle with 1/4 inch mount for bit holder.
52712 105Typeincl. of bit holder with special, free from floatclamping for bits with drive C 6,3 and E 6,3.
52712 102
52712 104
52712 105
eng/OP
• Bit assortments
www.hhw.de52.34
5
Bits XLSelectoren
+TypeHigh-quality, impact-proof plastic box.
ApplicationEasy bit removal thanks to integrated clampingledge.
52722 101
Set contents 52722 103:1 ClixFix quick-change toolholder magnetic N 1/4 inch x J 1/4 inch,
Q 3 bits for slotted screws 5,5 / 6,5 / 8,0 mm, torsion zone,D 9 bits for Phillips recess head screws 2xPH1 / 5xPH2 / 2xPH3, torsion zone,E 9 bits for Phillips recess head screws 2xPZ1 / 5xPZ2 / 2xPZ3, torsion zone,J 3 bits for Allen screws size 4,0 / 5,0 / 6,0 mm,M 6 bits for TORX® screws T 10 / 15 / 20 / 25 / 30 / 40.
Set contents 52722 104:1 ClixFix quick-change toolholder magnetic N 1/4 inch x J 1/4 inch,
$ 4 bits for Spanner screws # 4 / 6 / 8 / 10,? 6 bits for Allen screws, with borehole size 2 / 2,5 / 3 / 4 / 5 / 6 mm,% 3 bits for TORQ®-Set screws # 6 / 8 / 10,P 3 bits for Square Drive screws # 1 / 2 / 3,/ 9 bits for ResisTORX® screws TX 8 / 9 / 10 / 15 / 20 / 25 / 27 / 30 / 40,& 5 bits for TRI-WING® screws # 0 / 1 / 2 / 3 / 4.
Contents 52722 …
31-part 10131-part 10331-part 104
52722 103
52722 104
52722
INKRA Bits XSelector
+TypePerfect torque transmission and reduced cam-outeffect. Even when working in a slanted position ofthe power tool or the screwdriver, virtually constantinsertion into the screw head.
Application The XSelector (78 x 53 x 15 mm) fits in everypocket. Easy bit removal thanks to integratedclamping ledge.
52729
Set contents 52729 101:1 multi-purpose adapter magneticmagnetic N 1/4 inch / J 1/4 inch, 5 bits for Phillips recess head screws PH 1 / 2 / 2 / 2 / 3, 5 bits for Phillips recess head screws PZ 1 / 2 / 2 / 2 / 3.
Contents 52729 …
11-part 101
Even when working in a slanted position, handling ismuch easier thanks to lower contact pressure.
Slippage and wear of the tip or the screw head arereduced.
52729
Set contents 52722 101:1 multi-purpose adapter magnetic N 1/4 inch x J 1/4 inch,
Q 3 bits for slotted screws 4,5 / 5,5 / 6,5 mm,D 7 bits for Phillips recess head screws 2xPH1 / 4xPH2 / 1xPH3,E 8 bits for Phillips recess head screws 2xPZ1 / 5xPZ2 / 1xPZ3,M 12 bits for TORX® screws 2xT10 / 2xT15 / 2xT20 / 3xT25 / 2xT30 / 1xT40.
Performance requires quality.www.atorn.com
Screwdrivers by ATORN:
ATORN‘s high-quality hand tools.
ß Hand tools
eng/OP www.hhw.de 52.35
5
DURA Bits XSelectors
+Type With torsion zone and revolutionary coating. Thestrength-hard, elastic DURA bit with an extremelywear-resistant, patented carbide coating clings tothe screw head with finest micro carbide particles.98,2 % of the users polled during a Wiha-study saythat the Wiha DURA-bit ist -better- or -much better-when compared to bits used so far. Less slip-off
and less pressure needed. Absorbing energy, thebit is protected against early damage. Particularlysuitable for serial screw fittings and for heavy-dutyapplications. Application The XSelector (78 x 53 x 15 mm) fits in everypocket. Easy bit removal thanks to integratedclamping ledge.
52723
Set contents 52723 101:1 ClicFix quick-change toolholder magnetic N 1/4 inch x J 1/4 inch,
Q 2 bits for slotted screws 5,5 / 6,5 mm, D 4 bits for Phillips recess head screws PH 1 / 2 / 2 / 3, E 4 bits for Phillips recess head screws PZ 1 / 2 / 2 / 3.
Contents 52723 …
11-part 101
52723
Standard Bit XSelectors
+Application The XSelector (78 x 53 x 15 mm) fits in everypocket. Easy bit removal thanks to integratedclamping ledge.
52724 101
Set contents 52724 101:1 multi-purpose adapter magnetic N 1/4 inch x J 1/4 inch,
Q 2 bits for slotted screws 5,5 / 6,5 mm, D 4 bits for Phillips recess head screws PH 1 / 2 / 2 / 3, E 4 bits for Phillips recess head screws PZ 1 / 2 / 2 / 3.
Set contents 52724 102:1 multi-purpose adapter magnetic N 1/4 inch x J 1/4 inch,
M 10 bits for TORX® screws T 7 / 8 / 9 / 10 / 15 / 20 / 25 / 27 / 30 / 40.
Contents 52724 …
11-part 10111-part 10211-part 10411-part 106
52724 102
52724 104
52724 106
52724
Set contents 52724 104:1 multi-purpose adapter magnetic N 1/4 inch x J 1/4 inch,
D 3 bits for Phillips recess head screws PH 1 / 2 / 3, E 3 bits for Phillips recess head screws PZ 1 / 2 / 3, M 4 bits for TORX® screws T 15 / 20 / 25 / 30.
Set contents 52724 106:1 multi-purpose adapter magnetic N 1/4 inch x J 1/4 inch,
D 5 bits for Phillips recess head screws PH 1 / 2 / 2 / 3 / 3, M 5 bits for TORX® screws T 15 / 20 / 25 / 30 / 40.
eng/OP
• Bit assortments • Inkra Bits
www.hhw.de52.36
5
Set contents 52720 206:1 multi-purpose adapter with quick-exchange mount N 1/4 inch / J 1/4 inch,
Q 3 bits for slotted screws 0,8 x 5,5 / 1,0 x 5,5 / 1,2 x 6,5 mm, D 3 bits for Phillips recess head screws PH 1 / 2 / 3, E 3 bits for Phillips recess head screws PZ 1 / 2 / 3.
Set contents 52720 204:1 multi-purpose adapter with quick-exchange mount N 1/4 inch / J 1/4 inch,
M 9 bits for TORX® screws TX 8 / 9 / 10 / 15 / 20 / 25 / 27 / 30 / 40.
Set contents 52720 203:1 multi-purpose adapter with quick-exchange mount N 1/4 inch / J 1/4 inch,
/ 6 bits ResisTORX® with borehole T 10 / 15 / 20 / 25 / 30 / 40.
Set contents 52720 208:1 multi-purpose adapter Rapidaptor with quick-exchange mount N 1/4 inch / J 1/4 inch,
Q 1 bit for slotted screws 1,0 x 5,5 mm, D 6 bits for Phillips recess head screws PH 2 x size 1 / 3 x size 2 / 1 x size 3, E 6 bits for Phillips recess head screws PZ 2 x size 1 / 3 x size 2 / 1 x size 3, J 5 bits Hexagonal-Plus for Allen screws size 3 / 4 / 5 / 6 / 8 mm, M 6 bits for TORX® screws TX 10 / 15 / 20 / 25 / 30 / 40, / 5 bits ResisTORX® with borehole T 10 / 15 / 20 / 25 / 30.
Set contents 52720 201:1 BiTorsion holder Rapidaptor with quick-exchange mount N 1/4 inch / J 1/4 inch,
Q 3 bits for slotted screws 0,8 x 5,5 / 1,0 x 5,5 / 1,2 x 6,5 mm,D 3 bits for Phillips recess head screws PH 1 / 2 / 3,E 3 bits for Phillips recess head screws PZ 1 / 2 / 3.
Set contents 52720 199:1 BiTorsion holder Rapidaptor with quick-exchange mount N 1/4 inch / J 1/4 inch,
Q 2 bits diamond-coated for slotted screws 1,0 x 5,5 / 1,2 x 6,5 mm, D 2 bits diamond-coated for Phillips recess head screws PH 1 / 2, E 2 bits diamond-coated for Phillips recess head screws PZ 1 / 2.
Bit assortments Bit Check®
sTypeIn plastic case.
52720 199-201TypeWith BiTorsions holder Rapidaptor with quick-ex-change mount.
52720 208TypeWith multi-purpose adapter Rapidaptor with quick-exchange mount.
52720 203-206TypeWith multi-purpose adapter with quick-exchangemount.
52720 199
52720 201
52720 203
52720 204
52720 206
52720 208
52720
Stainless steel bit assortment Bit-Check®
sTypeIn plastic case. With stainless steel holder Rapi-daptor with quick-exchange mount for mounting in
the power screwdriver or in the drill chuck of theelectrical drill. 52728
Set contents 52728 101:1 stainless steel holder Rapidaptor with quick-exchange mount N 1/4 inch / J 1/4 inch,
J 4 bits for Allen screws size 2,5 / 3,0 / 4,0 / 5,0 mm, D 5 bits for Phillips recess head screws PH 2 x size 1 / 2 x size 2 / 1 x size 3.
Set contents 52728 …
10-part 101
52728
. Wera StainlessThe tool for better results.
sThe use of stainless steel averts corrosion. Stainless steel needs tools made of stainless steel.This is the only way to prevent corrosion caused by the abrasion of standard tools.
ß Hand tools
eng/OP www.hhw.de 52.37
5
Bit assortments Bit-Safe®
s52725 098TypeWith multi-purpose adapter Rapidaptor with quick-exchange mount.
52725 104TypeWith multi-purpose adapter.
52725 098
Set contents 52725 …
61-part 09861-part 104
52725 104
52725
Set contents 52725 098:1 multi-purpose adapter Rapidaptor® with quick-exchange mount,
Q 1 ea. bit 0,6 x 4,5 / 1,0 x 5,5 / 1,2 x 6,5 mm, J 3 ea. bits size 2,5 / 3 / 4, J 2 bits size 5,D 3 bits PH 1 / 25, D 10 bits PH 2 / 25, D 2 bits PH 3 / 25, E 3 bits PZ 1 / 25, E 10 bits PZ 2 / 25, E 2 bits PZ 3 / 25, M 2 bits TX 10, M 3 ea. bits TX 15 / 20 / 25 / 30, M 2 bits TX 40.
Set contents 52725 104:1 multi-purpose adapter,
Q 1 ea. bit 0,6 x 4,5 / 1,0 x 5,5 / 1,2 x 6,5 mm,J 3 ea. bits size 2,5 / 3 / 4,J 2 bits size 5,D 3 bits PH 1 / 25,D 10 bits PH 2 / 25,D 2 bits PH 3 / 25,E 3 bits PZ 1 / 25,E 10 bits PZ 2 / 25,E 2 bits PZ 3 / 25,M 2 bits TX 10,M 3 ea. bits TX 15 / 20 / 25 / 30,M 2 bits TX 40.
Inkra bits 1/4 Inch (Drive C 6,3)
+TypePerfect torque transmission and reduced cam-outeffect. Even when working in a slanted position ofthe power tool or the screwdriver, virtually constantinsertion into the screw head.
52869 101-103ApplicationD Phillips recess head screws PH.Drive: 1/4 inch hexagon DIN 3126-C 6,3,ISO 1173.Output: DIN 5260-PH, ISO 8764-PH.
52869 201-203Application E Phillips recess head screws PZ.Drive: 1/4 inch hexagon DIN 3126-C 6,3,ISO 1173.Output: DIN 5260-PZ, ISO 8764-PZ.
52869 101-103
Size Length 52869 …mm a
PH 1 25 10 pcs. 101PH 2 25 10 pcs. 102PH 3 25 10 pcs. 103PZ 1 25 10 pcs. 201PZ 2 25 10 pcs. 202PZ 3 25 10 pcs. 203
52869 201-203
Even when working in a slanted position, handling ismuch easier thanks to lower contact pressure.
Slippage and wear of the tip or the screw head arereduced.
52869
Set contents Equipped with Bit type 52720 …
7-part BiTorsion holder Rapidaptor BiTorsion, diamond-coated 19910-part BiTorsion holder Rapidaptor BiTorsion, strength-hard 20130-part multi-purpose adapter Rapidaptor Torsion, strength-hard 2087-part multi-purpose adapter strength-hard 203
10-part multi-purpose adapter Torsion, strength-hard 20410-part multi-purpose adapter Torsion, strength-hard 206
. a= Sales are restricted to the packaging units mentioned
in the catalogue. Purchase orders must be in units.
eng/OP
• Dura Bits • BiTorsion Bits • Extra hard Bits Torsionform
www.hhw.de52.38
5
Dura bits 1/4 Inch (Drive C 6,3)
+With torsion zone and a revolutionary coating. The strength-hard, elastic DURA-bit with extremely wear-resistant, patented carbide coating bites into thescrew head with finest micro carbide particles. Less slip-off and less pressure needed. Absorbing energy, the bit is protected against early damage. Particularlysuitable for serial screw fittings and for heavy-duty screwing works.
52790Application Q slotted screws. Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: DIN 5264-C, ISO 2380.
Size Length 52790 …mm a
0,6 x 4,5 25 10 pcs. 2010,8 x 5,5 25 10 pcs. 2021,2 x 6,5 25 10 pcs. 204
Size Length 52794 …mm a
PZ 1 25 10 pcs. 101PZ 2 25 10 pcs. 102PZ 3 25 10 pcs. 103
Size Length 52792 …mm a
PH 1 25 10 pcs. 101PH 2 25 10 pcs. 102PH 3 25 10 pcs. 103
Size Length 52796 …mm a
T 10 25 10 pcs. 101T 15 25 10 pcs. 102T 20 25 10 pcs. 103T 25 25 10 pcs. 104T 30 25 10 pcs. 105T 40 25 10 pcs. 106
52792Application D Phillips recess head screws PH.Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: DIN 5260-PH, ISO 8764-PH.
52794Application E Phillips recess head screws PZ.Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: DIN 5260-PZ, ISO 8764-PZ.
52796Application M inner TORX® screws.
Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: TORX®.
52790 - 52796
52800Application Q slotted screws. Drive: 1/4 inch hexagon DIN 3126-C 6,3, suitable for holder in compliance with DIN 3126-D 6,3, ISO 1173.
Size Length 52800 …mm a
0,8 x 5,5 25 10 pcs. 1011,0 x 5,5 25 10 pcs. 1021,2 x 6,5 25 10 pcs. 103
Size Length 52804 …mm a
PZ 1 25 10 pcs. 101PZ 2 25 10 pcs. 102PZ 3 25 10 pcs. 103
Size Length 52807 …mm a
PH 1 50 10 pcs. 101PH 2 50 10 pcs. 102PH 3 50 10 pcs. 103
52802Application D Phillips recess head screws PH.Drive: 1/4 inch hexagon DIN 3126-C 6,3, suitable for holder in compliance with DIN 3126-D 6,3, ISO 1173.
52804Application E Phillips recess head screws PZ.Drive: 1/4 inch hexagon DIN 3126-C 6,3, suitable for holder in compliance with DIN 3126-D 6,3, ISO 1173.
52807Application D Phillips recess head screws PH.Drive: 1/4 inch hexagon DIN 3126-E 6,3, suitable for holder in compliance with DIN 3126-F 6,3, ISO 1173.
BiTorsion bits diamond-coated 1/4 inch (drive C 6,3 / E 6,3)52800 - 52815
Size Length 52802 …mm a
PH 1 25 10 pcs. 101PH 2 25 10 pcs. 102PH 3 25 10 pcs. 103
sTypeBiTorsion for long service life, diamond-coated for a secure hold in the screw.The advantages:. Reduced wear of bit and screw head.. Less pressure needed, less slip-offs.. Reduction of working time.. Reduction of costs per screw.
. a= Sales are restricted to the packaging units mentioned
in the catalogue. Purchase orders must be in units.
ß Hand tools
eng/OP www.hhw.de 52.39
5
52809Application E Phillips recess head screws PZ.Drive: 1/4 inch hexagon DIN 3126-E 6,3, suitable for holder in compliance with DIN 3126-F 6,3, ISO 1173.
52815Application M inner TORX® screws.Drive: 1/4 inch hexagon DIN 3126-C 6,3, suitable for holder in compliance with DIN 3126-D 6,3, ISO 1173.
Size Length 52809 …mm a
PZ 1 50 10 pcs. 101PZ 2 50 10 pcs. 102PZ 3 50 10 pcs. 103
Size Length 52815 …mm a
T 10 25 10 pcs. 101T 15 25 10 pcs. 102T 20 25 10 pcs. 103T 25 25 10 pcs. 104T 30 25 10 pcs. 105T 40 25 10 pcs. 106
BiTorsion bits SIT 1/4 inch (drive C 6,3)
sType The SIT system was introduced under the name -AW-Profil- and has decisively improved the workwith Assy® and pias screws.(1) Better force transmission thanks to 6 contactsurfaces. Long service life thanks to narrowtolerances and high force transmission. (2) Quickinsertion and better fit thanks to slightly taperedscrew and bit. Lower cam-out-forces (highpressure to be put on the tool) thanks to improvedforce transmission and saft fit of the tool in thescrew. Easy handling thanks to colour codes.
BiTorsion for a long service life, strength-hard,especially suitable for harder application, e.g. insheet metal or metal.The advantages:. Reduced wear of bit and screw head.. Less pressure needed, less slip-offs.. Reduction of working time.. Reduction of costs per screw.
Application Assy®, pias screws. Drive: 1/4 inch hexagon DIN 3126-C 6,3, suitablefor holder in compliance with DIN 3126-D 6,3, ISO1173.
52818 101
Size Length 52818 …mm a
SIT 10 25 10 pcs. 101SIT 20 25 10 pcs. 102SIT 25 25 10 pcs. 103SIT 30 25 10 pcs. 104
52818 102
52818 103
52818 104
52818
Extra hard bits Torsionsform 1/4 inch (drive C 6,3 / E 6,3)
TypeExtra hard bits, torsion with extremely high static torque. Torsion tip absorbes force peaks from tool head. Especially suitable for soft applications, e.g. in wood.
52822 - 52828
52822Application D Phillips recess head screws PH.Drive: 1/4 inch hexagon DIN 3126-C 6,3, suitable for holder in compliance with DIN 3126-D 6,3, ISO 1173.
52824Application E Phillips recess head screws PZ.Drive: 1/4 inch hexagon DIN 3126-C 6,3, suitable for holder in compliance with DIN 3126-D 6,3, ISO 1173.
52826Application D Phillips recess head screws PH.Drive: 1/4 inch hexagon DIN 3126-E 6,3, suitable for holder in compliance with DIN 3126-F 6,3, ISO 1173.
52828Application E Phillips recess head screws PZ.Drive: 1/4 inch hexagon DIN 3126-E 6,3, suitable for holder in compliance with DIN 3126-F 6,3, ISO 1173.
Size Length 52822 …mm a
PH 1 25 10 pcs. 101PH 2 25 10 pcs. 102PH 3 25 10 pcs. 103
Size Length 52824 …mm a
PZ 1 25 10 pcs. 101PZ 2 25 10 pcs. 102PZ 3 25 10 pcs. 103
Size Length 52826 …mm a
PH 1 50 10 pcs. 101PH 2 50 10 pcs. 102PH 3 50 10 pcs. 103
Size Length 52828 …mm a
PZ 1 50 10 pcs. 101PZ 2 50 10 pcs. 102PZ 3 50 10 pcs. 103
. a= Sales are restricted to the packaging units mentioned
in the catalogue. Purchase orders must be in units.
eng/OP
• Strenght hard bits Torsion • Strenght hard bits extra long
www.hhw.de52.40
Strength hard bits, Torsion 1/4 inch (Drive C 6,3/E 6,3)
TypeStrength-hard bits in torsion form for tough screwing applications. Torsion tip absorbes force peaks from tool head.
52835Application Q slotted screws.Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: DIN 5264-C, ISO 2380.
Size Length 52835 …mm a
0,5 x 4,0 25 10 pcs. 1010,6 x 4,5 25 10 pcs. 1020,8 x 5,5 25 10 pcs. 1031,0 x 5,5 25 10 pcs. 1041,2 x 6,5 25 10 pcs. 1051,6 x 8,0 25 10 pcs. 106
Size Length 52837 …mm a
PH 1 25 10 pcs. 101PH 2 25 10 pcs. 102PH 3 25 10 pcs. 103
Size Length 52839 …mm a
PZ 1 25 10 pcs. 101PZ 2 25 10 pcs. 102PZ 3 25 10 pcs. 103
Size Length 52841 …mm a
PH 1 25 10 pcs. 101PH 2 25 10 pcs. 102PH 3 25 10 pcs. 103
52837Application D Phillips recess head screws PH.Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: DIN 5260-PH, ISO 8764-PH.
52839Application E Phillips recess head screws PZ.Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: DIN 5260-PZ, ISO 8764-PZ.
52841Application D ACR Phillips recess head screws PH.Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: DIN 5260-PH, ISO 8764-PH.
52843Application E ACR Phillips recess head screws PZ.Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: DIN 5260-PZ, ISO 8764-PZ.
52845Application D Phillips recess head screws PH.Drive: 1/4 inch hexagon DIN 3126-E 6,3, ISO 1173Output: DIN 5260-PH, ISO 8764-PH.
52846Application E Phillips recess head screws PZ.Drive: 1/4 inch hexagon DIN 3126-E 6,3,ISO 1173.Output: DIN 5260-PZ, ISO 8764-PZ.
52835 - 52846
Size Length 52843 …mm a
PZ 1 25 10 pcs. 101PZ 2 25 10 pcs. 102PZ 3 25 10 pcs. 103
Size Length 52846 …mm a
PZ 1 50 10 pcs. 101PZ 2 50 10 pcs. 102PZ 3 50 10 pcs. 103
Size Length 52845 …mm a
PH 1 50 10 pcs. 101PH 2 50 10 pcs. 102PH 3 50 10 pcs. 103
Performance requires quality.www.atorn.com
Tool carts by ATORN:
ATORN‘s high-quality workshop furnishings.
. a= Sales are restricted to the packaging units mentioned
in the catalogue. Purchase orders must be in units.
5
ß Hand tools
eng/OP
52850Application Q slotted screws.Drive: 1/4 inch hexagon DIN 3126-E 6,3, ISO 1173.Output: DIN 5264-C, ISO 2380.
Size Length 52852 …approx. mm a
PH 1 70 10 pcs. 101L PH 1 89 10 pcs. 102
XL PH 1 127 10 pcs. 103XXL PH 1 152 10 pcs. 104
PH 2 70 10 pcs. 105L PH 2 89 10 pcs. 106
XL PH 2 110 10 pcs. 107XXL PH 2 127 10 pcs. 108
XXXL PH 2 152 10 pcs. 109PH 3 70 10 pcs. 110
L PH 3 89 10 pcs. 111XL PH 3 110 10 pcs. 112
XXL PH 3 152 10 pcs. 113
Size Length 52854 …approx. mm a
PZ 1 70 10 pcs. 101L PZ 1 89 10 pcs. 102
XL PZ 1 127 10 pcs. 103XXL PZ 1 152 10 pcs. 104
PZ 2 70 10 pcs. 105L PZ 2 89 10 pcs. 106
XXL PZ 2 127 10 pcs. 108XXXL PZ 2 152 10 pcs. 109
PZ 3 70 10 pcs. 110L PZ 3 89 10 pcs. 111
XXL PZ 3 152 10 pcs. 113
Size Length 52856 …approx. mm a
T 8 50 10 pcs. 101L T 8 70 10 pcs. 102
XL T 8 89 10 pcs. 103XXL T 8 152 10 pcs. 104
T 10 50 10 pcs. 105L T 10 70 10 pcs. 106
XL T 10 89 10 pcs. 107XXL T 10 152 10 pcs. 108
T 15 50 10 pcs. 109L T 15 70 10 pcs. 110
XL T 15 89 10 pcs. 111XXL T 15 152 10 pcs. 112
T 20 50 10 pcs. 113L T 20 70 10 pcs. 114
XL T 20 89 10 pcs. 115XXL T 20 152 10 pcs. 116
T 25 50 10 pcs. 117L T 25 70 10 pcs. 118
XL T 25 89 10 pcs. 119XXL T 25 152 10 pcs. 120
T 27 50 10 pcs. 121L T 27 70 10 pcs. 122
XL T 27 89 10 pcs. 123XXL T 27 152 10 pcs. 124
T 30 50 10 pcs. 125L T 30 70 10 pcs. 126
XL T 30 89 10 pcs. 127XXL T 30 152 10 pcs. 128
T 40 50 10 pcs. 129L T 40 70 10 pcs. 130
XL T 40 89 10 pcs. 131XXL T 40 152 10 pcs. 132
52854Application E Phillips recess head screws PZ.Drive: 1/4 inch hexagon DIN 3126-E 6,3, ISO 1173.Output: DIN 5260-PZ, ISO 8764-PZ.
52852Application D Phillips recess head screws PH.Drive: 1/4 inch hexagon DIN 3126-E 6,3, ISO 1173.Output: DIN 5260-PH, ISO 8764-PH.
52856Application M inner TORX® screwsDrive: 1/4 inch hexagon DIN 3126-E 6,3, ISO 1173.Output: TORX®.
Size Length 52850 …approx. mm a
0,5 x 3,0 50 10 pcs. 101L 0,5 x 3,0 70 10 pcs. 102
0,5 x 4,0 50 10 pcs. 1030,6 x 3,5 50 10 pcs. 104
L 0,6 x 3,5 70 10 pcs. 105XL 0,6 x 3,5 152 10 pcs. 106
0,6 x 4,5 50 10 pcs. 1070,8 x 4,0 50 10 pcs. 108
L 0,8 x 4,0 70 10 pcs. 109XL 0,8 x 4,0 89 10 pcs. 110
XXL 0,8 x 4,0 152 10 pcs. 1110,8 x 5,5 50 10 pcs. 1121,0 x 5,5 50 10 pcs. 113
L 1,0 x 5,5 70 10 pcs. 114XL 1,0 x 5,5 89 10 pcs. 115
XXL 1,0 x 5,5 152 10 pcs. 1161,2 x 6,5 50 10 pcs. 117
L 1,2 x 6,5 70 10 pcs. 118XL 1,2 x 6,5 152 10 pcs. 119
1,2 x 8,0 50 10 pcs. 120L 1,2 x 8,0 89 10 pcs. 121
1,6 x 8,0 50 10 pcs. 122L 1,6 x 8,0 89 10 pcs. 123
Strength-hard bits extra long 1/4 inch (drive E 6,3)
TypeStrength-hard bits in torsion form for tough screwing applications. Bits absorb high torques on screw-head.
52850 - 52856
. a= Sales are restricted to the packaging units mentioned
in the catalogue. Purchase orders must be in units. www.hhw.de 52.41
5
eng/OP
• Strenght hard bits • Standard Bits
www.hhw.de52.42
5
Strength hard bits 1/4 inch (drive C 6,3)
TypeStrength-hard bits for tough screwing applications. Bits absorb high torques on screw-head.
52858Application & TRI-WING® screws. Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173. Output: TRI-WING®.
Size Length 52858 …mm a
1 25 10 pcs. 1012 25 10 pcs. 1023 25 10 pcs. 1034 25 10 pcs. 1045 25 10 pcs. 1056 32 10 pcs. 1067 32 10 pcs. 1078 32 10 pcs. 108
Size Length 52859 …mm a
6 25 10 pcs. 1018 25 10 pcs. 102
10 25 10 pcs. 1031/4 inch 25 10 pcs. 104
Size Length 52860 …mm a
1,5 25 10 pcs. 1012,0 25 10 pcs. 1022,5 25 10 pcs. 1033,0 25 10 pcs. 1044,0 25 10 pcs. 1055,0 25 10 pcs. 1066,0 25 10 pcs. 1078,0 25 10 pcs. 108
10,0 25 10 pcs. 109
Size Length 52861 …mm a
2,5 25 10 pcs. 1013,0 25 10 pcs. 1024,0 25 10 pcs. 1035,0 25 10 pcs. 1046,0 25 10 pcs. 105
52864Application Inner TORX® screws with pilot (BO).Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: TORX®, with borehole in the driving tip.
52859 Application % TORQ-SET®Mplus screws.Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173. Output: TORQ-SET®Mplus.
52865 Application M inner TORX PLUS® screws. Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173. Output: TORX PLUS®.
52860Application J Allen screws.Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: outer hexagon.
52861Application J Allen screws.Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: ball head.
52862 Square bitsApplication P inner square screws Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173. Output: outer square.
52858 - 52865
Size Length Square for inner square 52862 …mm mm screws mm a
00 25 1,27 1,4 10 pcs. 1010 25 1,78 2,0 10 pcs. 1021 25 2,31 2,5 10 pcs. 1032 25 2,85 3,1 10 pcs. 1043 25 3,37 3,7 10 pcs. 1054 25 4,84 5,1 10 pcs. 106
Size Length 52865 …mm a
IP 6 25 10 pcs. 101IP 7 25 10 pcs. 102IP 8 25 10 pcs. 103IP 9 25 10 pcs. 104
IP 10 25 10 pcs. 105IP 15 25 10 pcs. 106
Size Length 52865 …mm a
IP 20 25 10 pcs. 107IP 25 25 10 pcs. 108IP 27 25 10 pcs. 109IP 30 25 10 pcs. 110IP 40 25 10 pcs. 111
Size Length 52864 …mm a
T 10 25 10 pcs. 101T 15 25 10 pcs. 102T 20 25 10 pcs. 103T 25 25 10 pcs. 104T 27 25 10 pcs. 105T 30 25 10 pcs. 106T 40 25 10 pcs. 107
. a= Sales are restricted to the packaging units mentioned
in the catalogue. Purchase orders must be in units.
ß Hand tools
eng/OP www.hhw.de 52.43
5
Standard Bits 1/4 Inch (Drive C 6,3/E 6,3)
TypeThe bits fulfil all requirements of DIN and ISO standards.
ApplicationFor all common powered screwdriver tools.
52870Application Q slotted screws.Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: DIN 5264-C, ISO 2380.
Size Length 52870 …mm a
0,6 x 4,5 25 10 pcs. 1010,8 x 5,5 25 10 pcs. 1021,0 x 5,5 25 10 pcs. 1031,2 x 6,5 25 10 pcs. 1041,6 x 8,0 25 10 pcs. 105
Size Length 52872 …mm a
PH 0 25 10 pcs. 100PH 1 25 10 pcs. 101PH 2 25 10 pcs. 102PH 3 25 10 pcs. 103
Size Length 52874 …mm a
PZ 0 25 10 pcs. 100PZ 1 25 10 pcs. 101PZ 2 25 10 pcs. 102PZ 3 25 10 pcs. 103
Size Length 52876 …mm a
3 25 10 pcs. 2014 25 10 pcs. 2025 25 10 pcs. 2036 25 10 pcs. 2047 25 10 pcs. 2058 25 10 pcs. 206
52876Application J Allen screws. Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173. Output: outer hexagon.
52872Application D Phillips recess head screws PH.Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: DIN 5260-PH, ISO 8764-PH.
52878Application H XZN Trisquare screws. Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173. Output: XZN.
52874Application E Phillips recess head screws PZ.Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: DIN 5260-PZ, ISO 8764-PZ.
52880Application M inner TORX® screws.
Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173.Output: TORX®.
52881 Application M inner TORX® screws.
Drive: 1/4 inch hexagon DIN 3126-C 6,3, ISO 1173. Output: TORX®.
52882 Application Inner TORX® screws with pilot (BO). Drive: 1/4 inch hexagon DIN 3126-E 6,3, ISO 1173. Output: TORX®, with borehole in the driving tip.
52870 - 52882
Size Length 52878 …mm a
M 4 25 10 pcs. 201M 5 25 10 pcs. 202M 6 25 10 pcs. 203M 8 25 10 pcs. 204
M 10 25 10 pcs. 205
Size Length 52880 …mm a
T 10 25 10 pcs. 106T 15 25 10 pcs. 107T 20 25 10 pcs. 108T 25 25 10 pcs. 109T 27 25 10 pcs. 110T 30 25 10 pcs. 111T 40 25 10 pcs. 112
Size Length 52881 …mm a
T 3 25 10 pcs. 101T 4 25 10 pcs. 102T 5 25 10 pcs. 103T 6 25 10 pcs. 104T 7 25 10 pcs. 105T 8 25 10 pcs. 106T 9 25 10 pcs. 107
T 10 25 10 pcs. 108T 15 25 10 pcs. 109T 20 25 10 pcs. 110
Size Length 52882 …mm a
T 7H 50 10 pcs. 101T 8H 50 10 pcs. 102T 9H 50 10 pcs. 103
T 10H 50 10 pcs. 104T 15H 50 10 pcs. 105T 20H 50 10 pcs. 106
. a= Sales are restricted to the packaging units mentioned
in the catalogue. Purchase orders must be in units.
eng/OP
• Strenght hard bits • Bit Holders • Bit Ratchet screwdrivers
Strength-hard bits 5/16 inch (drive C 8)
TypeStrength-hard bits for tough screwing applications. Bits absorb high torques on screw-head.
52889Application E Phillips recess head screws PZ.Drive: 5/16 inch hexagon DIN 3126-C 8, ISO 1173.Output: DIN 5260-PZ, ISO 8764-PZ.
Size Length 52885 …mm a
0,8 x 5,5 41 10 pcs. 1011,0 x 5,5 41 10 pcs. 1021,2 x 6,5 41 10 pcs. 103
1,6 x 10,0 41 10 pcs. 1062,0 x 12,0 41 10 pcs. 1072,5 x 14,0 41 10 pcs. 108
Size Length 52887 …mm a
PH 1 32 10 pcs. 101PH 2 32 10 pcs. 102PH 3 32 10 pcs. 103
Size Length 52889 …mm a
PZ 1 32 10 pcs. 101PZ 2 32 10 pcs. 102PZ 3 32 10 pcs. 103PZ 4 32 10 pcs. 104
Size Length 52891 …mm a
T 20 35 10 pcs. 101T 25 35 10 pcs. 102T 27 35 10 pcs. 103T 30 35 10 pcs. 104T 40 35 10 pcs. 105T 45 35 10 pcs. 106T 50 35 10 pcs. 107T 55 35 10 pcs. 108T 60 35 10 pcs. 109
52885Application Q slotted screws.Drive: 5/16 inch hexagon DIN 3126-C 8, ISO 1173.Output: DIN 5264-C, ISO 2380.
52891Application M inner TORX® screws.
Drive: 5/16 inch hexagon DIN 3126-C 8, ISO 1173.Output: TORX®.
52887Application D Phillips recess head screws PH.Drive: 5/16 inch hexagon DIN 3126-C 8, ISO 1173.Output: DIN 5260-PH, ISO 8764-PH.
52893Application J Allen screws.Drive: 5/16 inch hexagon DIN 3126-C 8, ISO 1173.Output: outer hexagon.
52885 - 52893
Bit holder
52897
Blade length Overall length 52897 … 52899 …mm mm120 218 101120 232 101
52899
52897 - 52899
52901
Blade length Overall length 52901 …mm mm100 218 101
Bit holders
sTypeSoft zone Kraftform® handle with roll stop andintegrated bit holder. The bayonet blade can bepartly pushed into the handle, with 1/4 inch outsidehexagon and Rapidaptor® quick-exchange mount.
Contents:1 bit ea. for slotted screws 1,0x5,5 / 1,2x6,5 mm,1 bit ea. for Phillips recess head screws PH 1 / 2,1 bit ea. for Phillips recess head screws PZ 1 / 2.ApplicationFor mounting 1/4 inch bits DIN 3126-C and -E 6,3, ISO 1173.
52901
Size Length 52893 …mm a
3 30 10 pcs. 1014 30 10 pcs. 1025 30 10 pcs. 1036 30 10 pcs. 1048 30 10 pcs. 105
10 30 10 pcs. 106
s52897TypeWith strong permanent magnet and hexagonalblade, nicromatt. With 1/4 inch outside hexagon incompliance with DIN 3126-D 6,3 and Kraftform®
handle with roll stop, multi-component.ApplicationFor mounting 1/4 inch bits DIN 3126-C 6,3, ISO1173.
52899TypeWith quick-exchange mount, magnetic, hexagonalblade and hexagonal shoulder at handle end forusing a wrench. With 1/4 inch outside hexagon incompliance with DIN 3126-D 6,3 and Kraftform®handle with roll stop, multi-component.ApplicationFor mounting 1/4 inch bits DIN 3126-C 6,3 and -E6,3, ISO 1173.
. a= Sales are restricted to the packaging units mentioned
in the catalogue. Purchase orders must be in units.www.hhw.de52.44
5
ß Hand tools
eng/OP www.hhw.de 52.45
Bit holders
52902
52902 …
201
52902
Bit holders
+TypeHexagon blade with magnetic holder. Ergonomically-shaped SoftFinish multi-component handle with rollstop. Folding bit magazine in handle, easy removalof bits and secure storage of up to 8 bits.
Contents:1 bit for slotted screws 6,5 mm,3 bits for Phillips recess head screws PH 1 / 2 / 3,1 bit for Phillips recess head screws PZ 2,3 bits for TORX® screws TX 15 / 20 / 25.ApplicationFor mounting 1/4 inch bits DIN 3126-C 6,3, ISO1173.
52912
52912 …
101
52912
ESD bit holders
+TypeWiha SoftFinish® ESD multi-component handlewith roll stop. With quick-exchange mountRapidFix, 1/4 inch outside hexagon in compliancewith DIN 3126, ISO 1173, shape D 6,3.
ApplicationFor application with electronic construction partswith risk of electrostatics. Complies with EN 100-015 part 1. For mounting 1/4 inch bits DIN 3126-C 6,3,ISO 1173. Compact, practical shape for working inhard-to-reach places.
52900
52900 …
101
52900
52919 …
101
Bit ratchet screwdriver52919
,TypeShort, compact handle. 1/4 inch magnetic bit holder.Clockwise and counterclockwise operation.ApplicationFor mounting 1/4 inch bits DIN 3126-C 6,3, ISO 1173.
52919
52920 …
101
Bit ratchet screwdriver52920
,TypeAllen screwdriver with magnet. Push-button LED's.Bit magazine in handle.Contents:2 bits for slotted screws 4,5 / 5,5 mm,2 bits for Phillips recess head screws PH 1 / 2,2 bits for Phillips recess head screws PZ 1 / 2.
ApplicationFor mounting 1/4 inch bits DIN 3126-C 6,3, ISO1173.
52920
BType With 1/4 inch outside hexagon in compliance withDIN 3126-D 6,3. Telescopic magazine for 7 bits.Smooth cap without seams for less friction. Ergono-mically-shaped handle.
Contents:3 bits for slotted screws 0,6x4,5 / 1,0x55 /
1,2x6,5 mm,3 bits for Phillips recess head screws PH 0 / 1 / 2, 2 bits for Phillips recess head screws PZ 1 / 2. Application For mounting 1/4 inch bits DIN 3126-C 6,3, ISO1173.
5
eng/OP
• Bit Holder • Bit Ratchet
www.hhw.de52.46
5Reversible bit ratchets
VTypeWith reverse lever. Surface chrome-plated, polished.ApplicationFor mounting bits.QualityChrome-vanadium steel.
52914Type1/4 inch drive, 20 teeth.
52915Type5/16 inch drive, 30 teeth.
52914
Drive Overall length 52914 … 52915 …inch mm
1/4 115 1015/16 200 101
52915
52914 - 52915
Bit reversible ratchet
VType With magnet, clockwise and counterclockwiseoperation, flat shape, glossy chrome-plated.
Application For screwdriver bits. Quality Special steel.
52906
Drive 52906 …inch
1/4 + 5/16 101
52906
Bit ratchet wrench
TypeWith magnet, for clockwise and counterclockwiseoperation, offset, chrome-plated.
ApplicationWith Allen key mount for screwdriver socket wrenchbits.
52910
Drive Overall length 52910 …inch mm
1/4 + 5/16 138 101
52910
ESD bit holders
sType With 1/4 inch outside hexagon in compliance withDIN 3126-D 6,3 and circlip. Kraftform Weralit ESDhandleApplication For application with electronic construction partswith risk of electrostatics. Complies with EN 100-015 part 1.
For mounting 1/4 inch bits DIN 3126-C 6,3, ISO1173.
52904 201Type Extra short.
52904 202Type Hexagonal blade, nicromatt, with roll stop.
52904 201
Blade length Overall length 52904 …mm mm
10 64 201100 212 202
52904 202
52904
Bit ratchet
TypeCan be switched to clockwise, counterclockwise andblocked operation. Allen socket with magnet, forscrewdriver bits with outer hexagon 1/4 inch DIN3126/ISO 1173 shape C 6,3. For the application with1/4 inch socket wrench bits the connector cat.-no.52932 101 (outer hexagonal and outer square 1/4
inch) may be used..ApplicationThe ratchet has a knurled quick-action mechanismfor pre-screwing. Serrated, high-quality mechanismwith a working angle of 30°. Ergonomically shapedhandle with 1/4 inch square drive for operation withT-handle, extension pieces etc.
52905
Overall length 52905 …mm
206,5 101
52905
ß Hand tools
eng/OP www.hhw.de 52.47
5
Readyflex® Freiraumknarre®
PTypeWith direct mounting of bits. DIN 3126 D 6,3.Steerable, 7 switch steps via flex-stop Variomatic(handle-lock automatic).ApplicationDue to low construction height by direct mounting,this ratchet is for special use within hard-to-reachplaces. For all screwing applications in industry andtrade.
QualityChrome-vanadium steel. 52907
52907 …
101
52907
Bit reversible ratchet
TypeReversible, 22 teeth, with steel handle and Allensocket 1/4 inch, DIN 3126, ISO 1173, shape D 6,3.Allen wrench with pressure spring (DBGM).Bits areeasy to insert, lock in place safely and are effortlessto remove. Also hexagonal shafts with wide grooves(DIN 3126, ISO 1173, shape E).
ApplicationFor screwdriver bits. 52908
Overall length 52908 …mm117 101
52908
. s The RapidaptorFaster, safer, easier exchange of bits.The Rapidaptor holders are a convincing improvement over the tested and proven multi-purpose adapters with quick-exchange mount. Because the Rapidaptor technology combines five decisive advantages.
Rapid-in and self-lock The bit can beinserted into themount withoutmoving the sleeve.As soon as the bit isinserted into thescrew, it is lockedand fits secure andwithout wobbling.
Rapid-outIn order to exchangethe bit, just slide thesleeve forward: Thespring mechanism liftsthe bit from the magnetand unlocks the tool.The bit can easily beremoved. The Rapid-out function allows foreasy removal even ofthe smallest bit sizes(such as PH 0 or TX 5)without using additionaltools..
Rapid-spinThe freewheelingapplication sleeveallows the user toguide the drill with thesleeve during thescrewing work. Thisfacilitates the insertioninto the screw andreduces the danger ofslipping off.
Chuck-allThe Rapidaptor® quick-change toolholder take1/4 inch bits incompliance with DIN3126-C 6,3 as well as E 6,3.
Single HandAll functions of theRapidaptor® quick-change toolholder suchas bit insertion orremoval can beperformed with onehand only. This quicker,more economical andergonomical: Not amovement too much.
Rapidaptor® withring magnet (cat.-no. 52913 093)The floating,freewheeling magneticsleeve ensures greathold even with largeand heavy screws:This allows forlightning-quickapplication.Thedangerous and painfulholding of the screwfor the application isno longer necessary.Perfect for overheadwork.
eng/OP
• Bit Holder • Connectors • Impact screwdriver
www.hhw.de52.48
5
Multi-purpose bit holder
52916DIN 7427-C, with circlip.
52918 102-108With special steel sleeve and strong permanentmagnet.
52918 110With sleeve made of beryllium and strong perma-nent magnet. Suitable for servo screwdrivers.
52918 102
With circlip with permanent magnetDrive DIN Output DIN Length mm 52916 … 52918 …
3126 inch 3126 (with magnet)5,5 J A 5,5 1/4 N D 6,3 – (72) 102
1/4 inch J E 6,3 1/4 N D 6,3 57 (50) 103 1031/4 inch J E 6,3 1/4 N D 6,3 – (74) 104
5/16 inch J – 1/4 N D 6,3 – (45) 105Ø 7 9 G 7 1/4 N D 6,3 – (75) 107SDS , – 1/4 N D 6,3 – (79) 108
1/4 inch J E 6,3 1/4 N D 6,3 – (75) 110
52918 103
52918 104
52918 105
52918 107
52918 108
52918 110
52916 - 52918
Connectors with outer square52932
Drive DIN Output DIN Length 52932 …3126 inch 3120/3126 mm
1/4 inch J C 6,3 1/4 z A 6,3/ – 25 1011/4 inch J E 6,3 1/4 z – / E 6,3 50 1021/4 inch J E 6,3 1/4 z – / E 6,3 100 1031/4 inch J E 6,3 3/8 z – / E 10 50 1041/4 inch J E 6,3 3/8 z – / E 10 100 105
Ø 7 9 G 7 1/4 z – / E 6,3 75 106Ø 7 9 G 7 3/8 z – / E 10 75 107SDS , – 1/4 z – / E 6,3 70 108
SDS max – 1/2 z – 95 109
52932 101 52932 102-105
52932 106-107
52932 108
52932 109
Bit holder with quick-exchange mount.
ApplicationQuick-exchange holders provide a stable and rigidconnection between holder and bit. Simultane-ously, a slight move of the clamping sleeve releasesthe lock and allows quick exchange of the tool.
52913 096sRapidaptorTypeWith quick-exchange mount and strong permanentmagnet.
52913 093sRapidaptor with ring magnetTypeWith quick-exchange mount and special sleeve.ApplicationFor lightning-quick application and secure seat ofthe screw on the holder. Ideal for overhead work orfor screwing in long screws.
52913 094sRapidaptor BiTorsionTypeWith quick-exchange mount. Output 1/4 inch Allenwith Wera quick-exchange mount Rapidaptor.
ApplicationAn integrated torsion zone reliably absorbs loadeffects and reduces therefore the risk of earlydamage of the tool. Lower cycle times andreplacements.
52913 095sRapidaptor stainless steelTypeWith quick-exchange mount. ApplicationThe usage of stainless steel bits reduces the dangerof corrosion stripes or pitting due to corrosioncaused by using standard bits with stainless steelscrews.
52913 091 +CentroFix, magneticType Metal sleeve, coated. Application For applications where the bit must hold in placesecurely.Optimised for the application with long bitsand drill bits. Thanks to the special holding mecha-nism, this bit holder can hold all types of bits with1/4 inch hexagon drive. The play between bit andholder is reduced to a minimum. One-hand operati-on for quick exchange of bits.
52913 096 52913 103
52913 093 52913 104
52913 094 52913 105
52913 095 52913 107
52913 091
Drive DIN Output DIN Length 52913 …3126 inch 3126 mm
1/4 inch J E 6,3 1/4 N D 6,3/F 6,3 50 0961/4 inch J E 6,3 1/4 N D 6,3/F 6,3 57 0931/4 inch J E 6,3 1/4 N D 6,3/F 6,3 75 0941/4 inch J E 6,3 1/4 N D 6,3/F 6,3 50 0951/4 inch J E 6,3 1/4 N D 6,3/F 6,3 60 091
Drive DIN Output DIN Length 52913 …3126 inch 3126 mm
1/4 inch J E 6,3 1/4 N D 6,3 74 1031/4 inch J E 6,3 1/4 N D 6,3 50 104
5/16 inch J – 1/4 N D 6,3 47 105Ø 7 9 G 7 1/4 N D 6,3 77 107
52913
ß Hand tools
eng/OP www.hhw.de 52.49
5
Bit holder with square drive
52935With quick-exchange mount.
52937Allen socket with ball stopfor mounting bits.
52938
0Allen socket with holding springfor mounting bits.
52939
Allen socket with pressure springfor mounting bits.QualityChrome-alloy steel.
52940,Allen socket with spring washers for mounting ofbits.
0 ,
Drive DIN Output DIN 52935 … 52937 … 52938 … 52939 … 52940 …inch 3121 inch 3126
1/4 . G 6,3 1/4 N D 6,3 101 101 101 101 1013/8 . G 10 1/4 N D 6,3 102 102 1023/8 . G 10 5/16 N D 8 103 1031/2 . G 12,5 1/4 N D 6,3 104 1041/2 . G 12,5 5/16 N D 8 105
52937
5293952935
52938
52940
52935 - 52940
Hexagonal socket wrench bits E 6,3
sDrive: 1/4 inch hexagon, suitable for holder incompliance with DIN 3126-F 6,3, ISO 1173.ApplicationFor outer hexagons.
52980 103-122 Non-magnetic.
52980 201-212 With strong permanent magnet.
52980 103-122
with magnetSize inch Overall length Ø 52980 … 52980 …mm mm mm5,5 - 50 11,0 103 201
6 - 50 11,0 104 2027 - 50 11,0 106 2038 - 50 12,5 107 2049 - 50 14,0 108 205
10 - 50 14,0 110 20611 - 50 16,0 111 20712 - 50 18,0 113 20813 - 50 18,0 115 209
- 1/4 50 11,0 120 210- 5/16 50 12,5 121 211- 3/8 50 14,0 122 212
52980 201-212
52980
Sets of impact screwdrivers
sApplicationTo loosen and tighten seized screws.
5294811-part, in sheet steel box.
5295113-part, in sheet steel box.
52948
Set contents 52948:1 impact screwdriver 5/16 inch hexagonal drive,1 adapter 5/16 inch hexagonal drive x 3/8 inch square output,
Q 6 bits for slotted screws 5,5 x 1,0 / 6,5 x 1,2 / 8 x 1,6 / 10 x 1,6 / 12 x 2,0 / 14 x 2,5 mm, D 3 bits for Phillips recess head screws size 2 / 3 / 4.
Set contents 52951:1 impact screwdriver 1/2 inch hexagonal drive, 1 adapter 1/2 inch hexagonal drive x 1/2 inch square output,
Q 6 bits for slotted screws 9 x 1,4 / 10 x 1,6 / 13 x 1,5 / 13 x 2,0 / 16 x 2,5 / 18 x 3,0 mm,D 2 bits for Phillips recess head screws size 3 / 4,J 3 bits for Allen screws size 10 / 12 / 14 mm.
5/16 inch 1/2 inchSet contents 52948 … 52951 …
11-part 10113-part 101
52948 - 52951
eng/OP
• Impact screwdriver • Bar clamps
www.hhw.de52.50
5 Impact screwdriver bits for Phillips screws
sApplicationFor usage in impact screwdrivers.
52962Drive: 5/16 inch hexagon.
52964Drive: 1/2 inch hexagon.
52962 - 52964
5/16 inch 1/2 inchSize 52962 … 52964 …
PH 1 101PH 2 102
5/16 inch 1/2 inchSize 52962 … 52964 …
PH 3 103 103PH 4 104 104
52962 - 52964
Impact screwdriver bits for Allen screws
52966
5/16 inchSize 52966 …mm
5 1016 102
5/16 inchSize 52966 …mm
8 10310 104
52966
sDrive: 5/16 inch hexagon.ApplicationFor usage in impact screwdrivers.
Impact screwdriver
sApplicationTo loosen and tighten seized screws.
52954 101
Hexagon drive for torque 52954 …inch screws Nm5/16 M 4 - 8 90 1011/2 M 6 - 14 180 102
52954 102
52954
Impact screwdriver bits for slotted screws52957 - 52959
sApplicationFor usage in impact screwdrivers.
52957Drive: 5/16 inch hexagon.
52959Drive: 1/2 inch hexagon.
52957 - 52959
5/16 inch 1/2 inchCutting edge thickness x width 52957 … 52959 …
mm1,0 x 5,5 1011,2 x 6,5 1021,6 x 8,0 1031,4 x 9,0 103
1,6 x 10,0 104 104
5/16 inch 1/2 inchCutting edge thickness x width 52957 … 52959 …
mm2,0 x 12,0 1052,0 x 13,0 1072,5 x 14,0 1082,5 x 16,0 1093,0 x 18,0 110
Performance requires quality.www.atorn.com
Screwdrivers by ATORN:
ATORN‘s high-quality hand tools.