5 9 ±70 0.0005 hcs series 10 ±150 0.0003 7 ±50 0.001 4 6 ±50 0 · 2020. 8. 14. · hcs series...
TRANSCRIPT
Rev Date: 08/05/2020 1 www.seielect.com
This specification may be changed at any time without prior notice. [email protected] Please confirm technical specifications before you order and/or use.
HCS Series High Current Metal Element Shunt Resistor
Stackpole Electronics, Inc. Resistive Product Solutions
Features: • Metal element shunt resistor
• Available in up to 10W power rating
• Resistance value from 0.2 to 5mΩ
• Current handling up to 224A in 5930 size
• Excellent long-term stability
• AEC-Q200 qualified
• RoHS compliant, lead free and halogen free
Applications: • Power modules
• Frequency converters
• Current sensor for power hybrid sources
• High current handling for automotive engine controls and power management
Electrical Specifications Ohmic Range (Ω) and Tolerance
1% and 5%
±300 0.0003
±200 0.0005
±150 0.001
±150 0.0003
±115 0.0005
±115 0.00075
±100 0.001
±50 0.002
4 ±50 0.003
3 ±50 0.004
1.5 2.5 ±50 0.005
12 ±200 0.0002
10 ±150 0.0003
9 ±70 0.0005
7 ±50 0.001
4 6 ±50 0.002
3 5 ±50 0.003
2.5 4 ±50 0.004
2 3 ±50 0.005
10 15 ±100 0.0002
7 10 ±100 0.0003
8 ±75 0.0005
9 ±50 0.001
4 7 ±50 0.002
3 - ±50 0.003
TCR (ppm/ºC)
HCS5930
HCS3920
HCS2512
HCS1206 -
6
6
5
Type / Code Power Rating (W)
@ 70°C
Power Rating (W)
@ 100°C
2
3
2
5
Rev Date: 08/05/2020 2 www.seielect.com
This specification may be changed at any time without prior notice. [email protected] Please confirm technical specifications before you order and/or use.
HCS Series High Current Metal Element Shunt Resistor
Stackpole Electronics, Inc. Resistive Product Solutions
Mechanical Specifications
Type / Code C (max.) Unit
0.126 ± 0.008 0.065 ± 0.008 0.047 ± 0.006 0.031 ± 0.008 inches
3.20 ± 0.20 1.65 ± 0.20 1.20 ± 0.15 0.80 ± 0.20 mm
0.126 ± 0.008 0.065 ± 0.008 0.035 ± 0.006 0.031 ± 0.008 inches
3.20 ± 0.20 1.65 ± 0.20 0.90 ± 0.15 0.80 ± 0.20 mm
0.126 ± 0.008 0.065 ± 0.008 0.035 ± 0.006 0.031 ± 0.008 inches
3.20 ± 0.20 1.65 ± 0.20 0.90 ± 0.15 0.80 ± 0.20 mm
0.256 ± 0.008 0.128 ± 0.008 0.046 ± 0.006 0.032 ± 0.006 0.035 ± 0.008 0.016 0.014 ± 0.004 inches
6.50 ± 0.20 3.25 ± 0.20 1.17 ± 0.15 0.82 ± 0.15 0.90 ± 0.20 0.40 0.35 ± 0.10 mm
0.256 ± 0.008 0.128 ± 0.008 0.042 ± 0.006 0.028 ± 0.006 0.035 ± 0.008 0.016 0.014 ± 0.004 inches
6.50 ± 0.20 3.25 ± 0.20 1.07 ± 0.15 0.72 ± 0.15 0.90 ± 0.20 0.40 0.35 ± 0.10 mm
0.256 ± 0.008 0.128 ± 0.008 0.037 ± 0.006 0.024 ± 0.006 0.035 ± 0.008 0.016 0.014 ± 0.004 inches
6.50 ± 0.20 3.25 ± 0.20 0.95 ± 0.15 0.60 ± 0.15 0.90 ± 0.20 0.40 0.35 ± 0.10 mm
0.256 ± 0.008 0.128 ± 0.008 0.029 ± 0.006 0.015 ± 0.006 0.035 ± 0.008 0.016 0.014 ± 0.004 inches
6.50 ± 0.20 3.25 ± 0.20 0.73 ± 0.15 0.38 ± 0.15 0.90 ± 0.20 0.40 0.35 ± 0.10 mm
0.256 ± 0.008 0.128 ± 0.008 0.038 ± 0.006 0.024 ± 0.006 0.035 ± 0.008 0.016 0.014 ± 0.004 inches
6.50 ± 0.20 3.25 ± 0.20 0.96 ± 0.15 0.61 ± 0.15 0.90 ± 0.20 0.40 0.35 ± 0.10 mm
0.256 ± 0.008 0.128 ± 0.008 0.030 ± 0.006 0.016 ± 0.006 0.035 ± 0.008 0.016 0.014 ± 0.004 inches
6.50 ± 0.20 3.25 ± 0.20 0.76 ± 0.15 0.41 ± 0.15 0.90 ± 0.20 0.40 0.35 ± 0.10 mm
0.256 ± 0.008 0.128 ± 0.008 0.026 ± 0.006 0.012 ± 0.006 0.035 ± 0.008 0.016 0.014 ± 0.004 inches
6.50 ± 0.20 3.25 ± 0.20 0.66 ± 0.15 0.31 ± 0.15 0.90 ± 0.20 0.40 0.35 ± 0.10 mm
0.256 ± 0.008 0.128 ± 0.008 0.026 ± 0.006 0.012 ± 0.006 0.035 ± 0.008 0.016 0.014 ± 0.004 inches
6.50 ± 0.20 3.25 ± 0.20 0.66 ± 0.15 0.31 ± 0.15 0.90 ± 0.20 0.40 0.35 ± 0.10 mm
0.402 ± 0.008 0.205 ± 0.008 0.078 ± 0.006 0.058 ± 0.006 0.071 ± 0.012 0.024 0.020 ± 0.004 inches
10.20 ± 0.20 5.20 ± 0.20 1.98 ± 0.15 1.48 ± 0.15 1.80 ± 0.30 0.60 0.50 ± 0.10 mm
0.402 ± 0.008 0.205 ± 0.008 0.076 ± 0.006 0.056 ± 0.006 0.071 ± 0.012 0.024 0.020 ± 0.004 inches
10.20 ± 0.20 5.20 ± 0.20 1.92 ± 0.15 1.42 ± 0.15 1.80 ± 0.30 0.60 0.50 ± 0.10 mm
0.402 ± 0.008 0.205 ± 0.008 0.054 ± 0.006 0.034 ± 0.006 0.071 ± 0.012 0.024 0.020 ± 0.004 inches
10.20 ± 0.20 5.20 ± 0.20 1.36 ± 0.15 0.86 ± 0.15 1.80 ± 0.30 0.60 0.50 ± 0.10 mm
0.402 ± 0.008 0.205 ± 0.008 0.036 ± 0.006 0.017 ± 0.006 0.071 ± 0.012 0.024 0.020 ± 0.004 inches
10.20 ± 0.20 5.20 ± 0.20 0.92 ± 0.15 0.42 ± 0.15 1.80 ± 0.30 0.60 0.50 ± 0.10 mm
0.402 ± 0.008 0.205 ± 0.008 0.047 ± 0.006 0.027 ± 0.006 0.071 ± 0.012 0.024 0.020 ± 0.004 inches
10.20 ± 0.20 5.20 ± 0.20 1.19 ± 0.15 0.69 ± 0.15 1.80 ± 0.30 0.60 0.50 ± 0.10 mm
0.402 ± 0.008 0.205 ± 0.008 0.037 ± 0.006 0.017 ± 0.006 0.071 ± 0.012 0.024 0.020 ± 0.004 inches
10.20 ± 0.20 5.20 ± 0.20 0.94 ± 0.15 0.44 ± 0.15 1.80 ± 0.30 0.60 0.50 ± 0.10 mm
0.402 ± 0.008 0.205 ± 0.008 0.033 ± 0.006 0.014 ± 0.006 0.071 ± 0.012 0.024 0.020 ± 0.004 inches
10.20 ± 0.20 5.20 ± 0.20 0.85 ± 0.15 0.35 ± 0.15 1.80 ± 0.30 0.60 0.50 ± 0.10 mm
0.402 ± 0.008 0.205 ± 0.008 0.033 ± 0.006 0.014 ± 0.006 0.071 ± 0.012 0.024 0.020 ± 0.004 inches
10.20 ± 0.20 5.20 ± 0.20 0.85 ± 0.15 0.35 ± 0.15 1.80 ± 0.30 0.60 0.50 ± 0.10 mm
0.591 ± 0.008 0.305 ± 0.008 0.076 ± 0.006 0.056 ± 0.006 0.165 ± 0.008 0.039 0.020 ± 0.004 inches
15.00 ± 0.20 7.75 ± 0.20 1.92 ± 0.15 1.42 ± 0.15 4.20 ± 0.20 1.00 0.50 ± 0.10 mm
0.591 ± 0.008 0.305 ± 0.008 0.057 ± 0.006 0.037 ± 0.006 0.165 ± 0.008 0.039 0.020 ± 0.004 inches
15.00 ± 0.20 7.75 ± 0.20 1.44 ± 0.15 0.94 ± 0.15 4.20 ± 0.20 1.00 0.50 ± 0.10 mm
0.591 ± 0.008 0.305 ± 0.008 0.043 ± 0.006 0.023 ± 0.006 0.165 ± 0.008 0.039 0.020 ± 0.004 inches
15.00 ± 0.20 7.75 ± 0.20 1.08 ± 0.15 0.58 ± 0.15 4.20 ± 0.20 1.00 0.50 ± 0.10 mm
0.591 ± 0.008 0.305 ± 0.008 0.054 ± 0.006 0.034 ± 0.006 0.165 ± 0.008 0.039 0.020 ± 0.004 inches
15.00 ± 0.20 7.75 ± 0.20 1.37 ± 0.15 0.87 ± 0.15 4.20 ± 0.20 1.00 0.50 ± 0.10 mm
0.591 ± 0.008 0.305 ± 0.008 0.037 ± 0.006 0.018 ± 0.006 0.165 ± 0.008 0.039 0.020 ± 0.004 inches
15.00 ± 0.20 7.75 ± 0.20 0.95 ± 0.15 0.45 ± 0.15 4.20 ± 0.20 1.00 0.50 ± 0.10 mm
0.591 ± 0.008 0.305 ± 0.008 0.035 ± 0.006 0.016 ± 0.006 0.165 ± 0.008 0.039 0.020 ± 0.004 inches
15.00 ± 0.20 7.75 ± 0.20 0.90 ± 0.15 0.40 ± 0.15 4.20 ± 0.20 1.00 0.50 ± 0.10 mm
HCS5930…2L00
T A P
HCS2512…L500
H
HCS1206…L300
L W
HCS5930…L200
HCS2512…L750
HCS3920…L300
HCS2512…L300
NA
HCS1206…1L00 NA
HCS3920…5L00
HCS2512…2L00
HCS2512…3L00
HCS2512…4L00
HCS2512…5L00
HCS3920…1L00
HCS3920…L500
HCS3920…L200
HCS5930…3L00
NA NA
NA NA
HCS1206…L500 NA NA NA
HCS5930…L300
HCS5930…L500
HCS5930…1L00
HCS2512…1L00
HCS3920…2L00
HCS3920…3L00
HCS3920…4L00
Rev Date: 08/05/2020 3 www.seielect.com
This specification may be changed at any time without prior notice. [email protected] Please confirm technical specifications before you order and/or use.
HCS Series High Current Metal Element Shunt Resistor
Stackpole Electronics, Inc. Resistive Product Solutions
Environmental Performance Characteristics
Power Derating Curve:
0
Terminal Temperature (ºC)
-60 0 20 40 60 80 100 120 140 160
100 ºC
170 ºC Pe
rce
nt
Rate
d P
ow
er
(%)
100-55 ºC 70 °C
80
60
40
20
180
Test Test Specification Test Condition
Short Time Overload ΔR: ± (1% + 0.0005Ω) 5 times rated power for 5 seconds
+25ºC / +125ºC (JIS-C5202-5.2)
Operating temperature range is -55°C to +170°C
Storage condition is 22°C to 28°C, humidity is of 40% to 75%.
Apply rated power for 1000 hours with 1.5 hours ON and 0.5 hour OFF.
(JIS-C5202-7.10)Load Life
The chip (mounted on board) is exposed, - 55 ± 3ºC (30 min) / +125 ± 2ºC
(30 minutes) for 5 cycles. The following conditions as the figure below.
(JIS_C5202-7.4)
Rapid Change of Temperature
ΔR: ± (1% + 0.0005Ω)
ΔR: ± (1% + 0.0005Ω)
Temperature Coefficient of
Resistance (TCR)
Refer to
Electrical Specifications
Moisture Resistance
The chip (mounted on board) is exposed in the heat chamber,
125ºC for 1000 hours (JIS-C5202-7.2)High Temperature Exposure
The specimens shall be placed in a chamber and subjected to a relative
humidity of 90 ~ 98% and a temperature of 25ºC / 65ºC, 10 cycles.
(MIL-STD-202, Method 106)
ΔR: ± (1% + 0.0005Ω)
ΔR: ± (1% + 0.0005Ω)
Rev Date: 08/05/2020 4 www.seielect.com
This specification may be changed at any time without prior notice. [email protected] Please confirm technical specifications before you order and/or use.
HCS Series High Current Metal Element Shunt Resistor
Stackpole Electronics, Inc. Resistive Product Solutions
Function Performance Characteristics
Taping Specifications – Embossed Plastic Tape
Type / Code Unit
0.074 ± 0.004 0.140 ± 0.004 0.069 ± 0.004 0.138 ± 0.002 0.315 ± 0.004 inches
1.88 ± 0.10 3.56 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.10 mm
0.140 ± 0.004 0.266 ± 0.004 0.069 ± 0.004 0.217 ± 0.002 0.472 ± 0.008 inches
3.55 ± 0.10 6.75 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.20 mm
0.217 ± 0.004 0.425 ± 0.004 0.069 ± 0.004 0.295 ± 0.002 0.630 ± 0.008 inches
5.50 ± 0.10 10.80 ± 0.10 1.75 ± 0.10 7.50 ± 0.05 16.00 ± 0.20 mm
0.327 ± 0.004 0.606 ± 0.004 0.069 ± 0.004 0.453 ± 0.004 0.945 ± 0.012 inches
8.30 ± 0.10 15.40 ± 0.10 1.75 ± 0.10 11.50 ± 0.10 24.00 ± 0.30 mm
HCS1206
HCS3920
(all Ω ranges)
HCS5930
(all Ω ranges)
WA B E F
HCS2512
(all Ω ranges)
Test Test Specification Test Condition
The part shall be immersed into the flux specified in the solder bath
235ºC ± 5ºC for 2 seconds ± 0.5 seconds. It shall be immersed to a point
10 mm from its root.
(Sn96.5/Ag3.0/Cu0.5) (JIS-C5 202 6.11)
Solderability
Note: The terminal temperature of component should be below 100ºC.
Mount the chip to test 90 mm (L)*40 mm (W) FR4 printed circuit board
substrate. Apply pressure in direction of arrow unit band width reaches
2 mm (+0.2 / -0 mm) illustrated in the picture below and hold for 10 ± 1
seconds (JIS-C5202-6.1)
Bending Strength ΔR: ± (1% + 0.0005Ω)
Solder shall cover 95% or more
of the electrode area
Rev Date: 08/05/2020 5 www.seielect.com
This specification may be changed at any time without prior notice. [email protected] Please confirm technical specifications before you order and/or use.
HCS Series High Current Metal Element Shunt Resistor
Stackpole Electronics, Inc. Resistive Product Solutions
Soldering Recommendations: • Peak reflow temperatures and durations
✓ IR Reflow Peak = 260ºC max for 10 seconds ✓ Not suitable for wave soldering
• Compatible with lead and lead-free solder reflow processes
• Recommended IR reflow profile:
Recommended Pad Layouts
Type / Code a b c Unit
0.055 0.083 0.071 inches
1.40 2.10 1.80 mm
0.150 0.071 0.134 inches
3.80 1.80 3.40 mm
0.220 0.106 0.244 inches
5.60 2.70 6.20 mm
0.220 0.205 0.344 inches
5.60 5.20 8.75 mm5930
1206
3920
2512
Taping Specifications – Embossed Plastic Tape (cont.) Type / Code Unit
0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.061 ± 0.002 0.055 ± 0.004 inches
4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 1.55 ± 0.05 1.40 ± 0.10 mm
0.157 ± 0.002 0.157 ± 0.004 0.079 ± 0.002 0.059 ± 0.004 0.055 ± 0.004 inches
4.00 ± 0.05 4.00 ± 0.10 2.00 ± 0.05 1.50 ± 0.10 1.40 ± 0.10 mm
0.157 ± 0.002 0.157 ± 0.004 0.079 ± 0.002 0.059 ± 0.004 0.043 ± 0.004 inches
4.00 ± 0.05 4.00 ± 0.10 2.00 ± 0.05 1.50 ± 0.10 1.10 ± 0.10 mm
0.157 ± 0.002 0.157 ± 0.004 0.079 ± 0.002 0.059 ± 0.004 0.031 ± 0.004 inches
4.00 ± 0.05 4.00 ± 0.10 2.00 ± 0.05 1.50 ± 0.10 0.80 ± 0.10 mm
0.157 ± 0.002 0.315 ± 0.004 0.079 ± 0.002 0.059 ± 0.004 0.078 ± 0.004 inches
4.00 ± 0.05 8.00 ± 0.10 2.00 ± 0.05 1.50 ± 0.10 1.97 ± 0.10 mm
0.157 ± 0.002 0.315 ± 0.004 0.079 ± 0.002 0.059 ± 0.004 0.049 ± 0.004 inches
4.00 ± 0.05 8.00 ± 0.10 2.00 ± 0.05 1.50 ± 0.10 1.25 ± 0.10 mm
0.157 ± 0.004 0.472 ± 0.004 0.079 ± 0.004 0.059 ± 0.004 0.091 ± 0.004 inches
4.00 ± 0.10 12.00 ± 0.10 2.00 ± 0.10 1.50 ± 0.10 2.30 ± 0.10 mm
0.157 ± 0.004 0.472 ± 0.004 0.079 ± 0.004 0.059 ± 0.004 0.055 ± 0.004 inches
4.00 ± 0.10 12.00 ± 0.10 2.00 ± 0.10 1.50 ± 0.10 1.40 ± 0.10 mm
HCS5930
(0.0005Ω, 0.002Ω, 0.003Ω)
HCS5930
(0.0002Ω, 0.0003Ω, 0.001Ω)
HCS1206
HCS2512
(0.0003Ω, 0.0005Ω, 0.00075Ω, 0.002Ω)
HCS2512
(0.001Ω, 0.003Ω)
HCS2512
(0.004Ω, 0.005Ω)
HCS3920
(0.0002Ω, 0.0003Ω, 0.0005Ω, 0.002Ω)
HCS3920
(0.001Ω, 0.003Ω, 0.004Ω, 0.005Ω)
TP0 P1 P2 D0
Rev Date: 08/05/2020 6 www.seielect.com
This specification may be changed at any time without prior notice. [email protected] Please confirm technical specifications before you order and/or use.
HCS Series High Current Metal Element Shunt Resistor
Stackpole Electronics, Inc. Resistive Product Solutions
Pulsed Power Characteristics – HCS2512
Pulsed Power Characteristics – HCS1206FTL500
Rev Date: 08/05/2020 7 www.seielect.com
This specification may be changed at any time without prior notice. [email protected] Please confirm technical specifications before you order and/or use.
HCS Series High Current Metal Element Shunt Resistor
Stackpole Electronics, Inc. Resistive Product Solutions
Pulsed Power Characteristics – HCS5930
Pulsed Power Characteristics – HCS3920
Rev Date: 08/05/2020 8 www.seielect.com
This specification may be changed at any time without prior notice. [email protected] Please confirm technical specifications before you order and/or use.
HCS Series High Current Metal Element Shunt Resistor
Stackpole Electronics, Inc. Resistive Product Solutions
Rated Power vs. Surface Temperature – HCS2512
Rated Power vs. Surface Temperature – HCS1206FTL500
Rev Date: 08/05/2020 9 www.seielect.com
This specification may be changed at any time without prior notice. [email protected] Please confirm technical specifications before you order and/or use.
HCS Series High Current Metal Element Shunt Resistor
Stackpole Electronics, Inc. Resistive Product Solutions
Rated Power vs. Surface Temperature – HCS5930
Temperature rise test boards use aluminum substrate (MCPCB).
Rated Power vs. Surface Temperature – HCS3920
Rev Date: 08/05/2020 10 www.seielect.com
This specification may be changed at any time without prior notice. [email protected] Please confirm technical specifications before you order and/or use.
HCS Series High Current Metal Element Shunt Resistor
Stackpole Electronics, Inc. Resistive Product Solutions
RoHS Compliance Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various regulatory requirements now prevalent, such as the European Union’s directive regarding “Restrictions on Hazardous Substances” (RoHS 3). As part of this ongoing program, we periodically update this document with the status regarding the availability of our compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament as amended by Directive (EU) 2015/863/EU as regards the list of restricted substances.
“Conflict Metals” Commitment We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined in the “conflict region” of the eastern Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding Conflict Minerals.
Compliance to “REACH” We certify that all passive components supplied by Stackpole Electronics, Inc. are SVHC (Substances of Very High Concern) free and compliant with the requirements of EU Directive 1907/2006/EC, “The Registration, Evaluation, Authorization and Restriction of Chemicals”, otherwise referred to as REACH. Contact us for complete list of REACH Substance Candidate List.
Environmental Policy It is the policy of Stackpole Electronics, Inc. (SEI) to protect the environment in all localities in which we operate. We continually strive to improve our effect on the environment. We observe all applicable laws and regulations regarding the protection of our environment and all requests related to the environment to which we have agreed. We are committed to the prevention of all forms of pollution.
1 2 3 4 5 6 7 8 9 10 11 12 13
H C S 3 9 2 0 F T L 3 0 0
RoHS Compliance Status
How to Order
HCS High Current Shunt Resistor SMD YES 100% Copper Always Always
Standard
Product
Series
Description
Package /
Termination
Type
Standard
Series
RoHS
Compliant
Lead-Free Termination
Composition
Lead-Free
Mfg. Effective Date
(Std Product Series)
Lead-Free
Effective Date
Code
(YY/WW)
Product Series Size Resistance Value
HCS 1206 Code Tol Code Description Size Quantity
2512 F 1% 7" Reel - Plastic Tape 1206 2000
3920 J 5% 10" Reel - Plastic Tape 2512 4000
5930 3920 3000
5930 2000
0.0003 ohm = L300
0.0005 ohm = L500
0.00075 ohm = L750
0.001 ohm = 1L00
Tolerance Packaging
T
Four characters with
"L" used as multiplier
of 10-3 for any value
under 0.1 ohm13" Reel - Plastic Tape