4m automation - bizzporto.com · 4m automation sco-12, shivraj indl premises, near vip, sec -7,...
TRANSCRIPT
4m AutomationSCO-12, Shivraj Indl Premises, Near VIP, Sec -7,
MIDC Bhosari, Pune, India.
Mobile : +91-9011963979, +91-8380096107, [email protected], [email protected]
The people for Automation
Solutions for
• Assembly SPMs & Value Addition ActivitiesPunching, Crimping, Pressing, Stamping, Shearing, Drilling, Riveting, Screw Driving, Staking, Marking, Welding (Ultrasonic / Vibration / Hotplate / Infrared), Vending, Dispensing, Spraying, Heating, Curing
• Quality Testing Part Presence, Leakage, Flow, Volume, Pressure, Weight, Counting, Torque, Dimensions, Displacement, Electrical Parameters, Optical Parameters
• Validation TestingDisplacement, Environmental, Chemical, Electrical, Physical Parameters, Biological properties
4m Automation
Design
Integration
Service & Support
At 4m Automation, we have a team of Designers, Integration Engineers & Support Engineers.
4m AutomationThe people for Automation
Leak Test SPMs for automobile parts• Leak test machines with Positive pressure, Negative pressure or Flow based technologies.• Our machines are used in automobile Air Filters, Lights, Fuel tank, cooling lines etc.• We have developed our own Leak Test Controller, that’s why we can make low cost machines.
Air Filter Leak Test machines
4m Automation
Weight Check & Laser Mark Automation• This 3 station Rotary table Machine has replaced 3
persons working at separate stations. The error possibility has reduced to zero due to operation interlock between weighing & Laser marking.
• In this case the product (Engine seals) were to be marked with batch code only if the weight of product is between specified window.
1. Weight measurement with LC 0.5 gm2. Laser Type – 20W Fibre Laser
4m Automation
• Front Grill punching is a post mold operation. This needs 22 holes to be punched in the front grill for adding Glazed child parts.
• All the holes are at a different angle to suit the contour of the grill.
• Three Hydro-pneumatic presses made this operation simple. We used Wedge operated punches to suit the various angles of holes.
• The safety light curtain prevents accidents during operation.
Front Grill Punching SPM4m Automation
Plastic Welding solutionsHot Plate Welding
Hot Plate Welding SPM
• Welding table Size – Width 400mm X Length 600mm• Day Light – 400mm• SSR Heater control• PLC control • Part sensors for foolproof production• Light curtain for safety• MS pipe structure with powder coating• Air Pressure interlock• Quick change fixtures• Servo option with HMI height adjustment
4m Automation
Plastic Welding solutionsUltrasonic Welding SPM
• Welding table Size – Width 400mm X Length 600mm• No. of Welding heads - 3• No. of welding Generators - 1• PLC control • HMI for process display• Part sensors for foolproof production• Light curtain for safety• Aluminum Extrusion structure• Child part storage bins• Air Pressure interlock• Quick change fixtures
4m Automation
Infra-red welding of PVC Pipe Infra-red welding of PP Sheet
4m Infra-red Welding Solutions4m Automation
Hot Insertion machineInsertion of Mounting Studs into Door Handle• 4m Automation has made insertion machines with Convection heating
& Induction heating technologies.• The Stud insertion machine on the right, can insert 2 Studs
simultaneously.• The CD can be maintained between 0.05mm
Studs
4m Automation
LOGO
Hot Staking Machines• 4m Automation has developed its own Hot staking head • These work on Hot-Cold principle. As a result we get a perfect Button formation, Material does not stick to the
Staking head.• The machine is designed with SMED thought process. So the Tool change over takes less than 5 minutes.• Heating time 5 Minutes• Light curtain for safety• Part presence Poka-Yoke• Air Pressure Interlock• Temperature Interlock• Malfunction Alarm• No of Fixtures - 2Nos• No of Staking heads – 8 Nos
4m Automation
Endurance Test SPM for Moving Parts The Endurance test system shown in the photos was designed to check following parts of Volkswagen Car.(1) Ashtray(2) Central Arm Rest(3) Cup Holder
• The machine is capable of working from -40 Degree Centigrade to +120 Degree Centigrade & 95% Humidity.
• Deviation of Torque value is the criteria behind stopping the machine.
4m Automation
A Vision or Image based inspection is suggested in following conditions
• To reduce Human Error• Inspecting at Micron level• Wanted Hi Speed of Inspection• Inspecting Difficult shapes• Giving eyes to the Robot
4m Automation has worked on Smart Camera solution for Screw Inspection
Vision Assisted Inspection4m Automation
Oil Impregnation Machine4m Automation Centrifuge based Oil Impregnation machines offer following features
• Selection of 2 oils for different variants to be made, alternatively• Fully automatic Pouring• VFD controlled Centrifuge speed• PLC based logic control• Squeeze for foam pressing• Quick Filling & drain of oil• Malfunction Alarm• Parameter lock Password
4m Automation
Plannum Appliqué
Metal Clip
Alarm light
OK Marker
Sensor for Clip sensing
Plannum Appliqué assembly Fixture with Poka-Yoke device
4m Automation
Mirror Stay Rod Torque test cum Crimping SPM
• To maintain the torque between stay rod & Mirror assembly is a very crucial aspect in 2 Wheeler mirrors. But to check torque in 100% assemblies is a difficult job, because it is a manual operation.
• In case if the mirror is made from sheet metal (as the shown in photos) then rework is also not possible. So a hi cost waste is generated.
• Solution is a machine which can test torque before crimping the Sheet metal case. The wrong parts are not crimped & an alarm alerts the operator.
• Measurement least count is 5 Grams
4m Automation
Low Cost solution in comparison to Imported ones.
• Up to 12 Controllers in compact size cabinet• Easy programming• Password protection• Separate lines of Heater control & Thermocouples• Shielded line for Thermocouples – 5 Meters• Temperature tolerance <1 Degree Centigrade• SSR for Heater control• Gate time - 0.1 sec to 50 Sec• Quick Connection Couplers
Hot Runner Temperature Controller (HRTC)Sequential Gate Timer (SGT)
12 Zone (HRTC) Hot Runner Temperature ControllerPrice – Rs. 1.5 Lakhs
4 Zone (SGT) Sequential Gate TimerPrice – Rs. 60,000/=
4m Automation
Key Biting Code Checker• The Optical Fibre based code checker can
display the key Code on its LCD screen, as we insert the key in its hole. In the photo we can see the actual sensing part.
• This prevents mixing of different code keys with the same lock
Automatic Bin Shifting System for Key Biting Machine • This reduces man dependency by shifting the
bins automatically as the key biting code changes.
• This improves productivity as the key of different code does not get mixed by manual error
Automations for Locking Industry
Key Code
4m Automation
Automations for Locking Industry
Caulking crimping machine for FFC Assly. line• The low cost machine can do both the
caulking & crimping operations on the same press, saving manpower & time.
FFC Release valve hot staking • The small & low cost machine
helps sealing valve with precision• This also loads the part on the
vending chute
4m Automation
4m Automation has provided design solutions by developing electronic circuits, in following areas.
(1) Cable Harness Tester(2) LED Lighting(3) Electronic Lock(4) Ovulite Endurance Tester(5) Actuated Mirror Movement Tester(6) Load Cell Amplifier(7) UV Lamp Driver(8) Leak Test Controller(9) Diesel Burner Controller(10) LPG Boiler Controller(11) Electroplating Controller(12) Nickel cadmium Cell Charger(13) Lead Acid Battery Charger(14) Landline Telephone Answering Machine
Electronic Circuit Design Solutions4m Automation