4.elastoseal p100
DESCRIPTION
Chất trám khe gốc Polyurethane Elastoseal P100TRANSCRIPT
ADCHEM Product information
ELASTOSEAL P100 ONE COMPONENT POLYURETHANE SEALANT
ELASTOSEAL P100 is an excellent quality, one component, and moisture curing polyurethane permanent elastomeric sealant. It is isocyanate terminated polyurethane which cross-links by the reaction of the residual isocyanate groups with atmospheric moisture. ELASTOSEAL P100 has excellent resistance to weather, heat, cryogenic conditions, water, chemicals and mechanical dynamic properties. It is designed for use in the areas of housing construction, utilities, marine, petroleum, aviation, chemical, railway and general industries.
1. CHARACTERISTIC
It has excellent follow-up to movement or vibration with a good balance of modulus to elongation. It has excellent adhesiveness with most kinds of substrate material. It can be over coated with organic solvents or aqueous paint after curing. It retains excellent properties for long term due to resistance to weather, heat, climate, water or chemicals. Classified as a first class durable sealant.
2. APPLICATIONS
Joint sealing for Precast Concrete Joint sealing for Tiles, Bricks & Plates of Marble Sealing of Sewer & Drainpipe joint Filling and coating of Container construction Repairing of concrete crack Filling for crack inducing groove of Reinforced Concrete Joint sealing for Slate & Flexible Board For sealing and caulking all joints that are subject to contraction and expansion
3. PACKAGE AND COLOUR
Item Package Color
ELASTOSEAL P100 Round nozzle cartridge: 320ml x 10/pack. Sausage: 600ml x 20 pack 5 kg pail: 4 liters x 2/pack
Grey, White, Ivory, Umber, Black
4. PROPERTIES (US-Federal Specification)
Meets to FS TT-S-00230C and ASTM C-920:2001
Properties Specifictions Test MethodStaining And Colour Change ASTM C-920 : 2001 ASTM C-510 : 1997Extrudability ASTM C-920 : 2001 ASTM C- 1183: 1997
F.S. TT-S-00230CASTM C-920 : 2001F.S. TT-S-00230C
ASTM C-920 : 2001F.S. TT-S-00230C
ASTM C-920 : 2001F.S. TT-S-00230C
ASTM C-920 : 2001Effects Of Heat Ageing On Weight Loss,Cracking And Chalking,average
ASTM C-920 : 2001 ASTM C- 1246 : 2000
Effects Of Accelerated Weathering ASTM C-920 : 2001 Adopted ASTM C-793 : 1997
F.S. TT-S-00230CASTM C-920 : 2001
Material Identification /Verification By FTIR
ASTM C-920 : 2001 —
Low-temperature Flexibility F.S. TT-S-00230C ASTMC-711Original After exposure
Tmax (Ib/in2) 548 346Emax (%) 1100 800Retain Tmax 63% Emax 73%
Pol yur ethane- based material
GoodPhysical Properties after Ultra-violet radiation (exposure time 1000 hrs.)
F.S. TT-S-00230C ASTM D-793 (D-412 : 1980)
No cracks after UV exposure and bend test
Adhesion-ln-Peel,average ASTM C-794 : 2001 24.9N (5.61bf)
Classification (Adhesion & Cohesion Under Cyclic Movement)
ASTM C-719 : 1998 Type fl ,C lass A No bond failure
6.8% No cracking and chalking
Indentation Hardness ASTM C-661 : 1998 Shore A 34
Tack-Free-Time ASTM C-679 : 1997 72hrs. >
Test ResultsNo staining and no colour change40.3ml/min (Type a grade NS)
Rheological (Flow) Properties ASTM C-639 : 2001 Vertical displacement : 0mm sagHorizontal displacement : No deformation
Cautions for storage and handling ELASTOSEAL P100 should be stored in cool and dry conditions avoiding direct sunlight. ELASTOSEAL P100 is reactive with alcohol and will not cure if reacted. As such, avoid applying in alcoholic circumstances, for example, coincidental application of silicon sealant
which volatilizes alcohol in atmosphere thereby causing it to react. Safety Precaution Irritation to eyes and skin and possibly toxic through physical contact. Therefore you must take following
precautions. Avoid contact with skin. If contact with skin, wipe immediately off with a cloth soaked in thinner and wash
thoroughly under running water using soap. Avoid eye contact. In case of eye contact, flush immediately with plenty of water and contact a physician. Do not use near from fire. Do not eating or smoking in working place. Do not use or apply without application manual. Detail safety precaution is shown in MSDS. The information contained herein is based on the present state of our knowledge. We do not provide warranty or guarantee for products made at different conditions for which are beyond our control. All separate trial cases should be studied and tested to obtain own parameter before any order and delivery.
ADCHEM
Advanced chemical company Building chemical division